[DISCUSSION][Q&A] CyanogenMod 11 Q&A Thread - Sony Xperia L

This thread is any discussions related to CM11, development thread for CM11 is located here. To keep the main thread clean and less OT posts, any further general discussions should continue here.

Several bugs have noticed so far:
1. If you don't have gapps, CM11 won't boot after reboot/shutdown/battery removal, it stucks on loading screen. Wiping Dalvik, Cache and Data helps. Wiping only Dalvik and Cache cause system to boot, but it stucks again on loading apps window. Installing gapps solved problem for now.
2. WiFi not working. It's connecting properly to router, WiFi icon indicates that the data are transmitted, but none of system or custom app have internet connection. Tested on D-Link and Netgear.

Galmido said:
Several bugs have noticed so far:
1. If you don't have gapps, CM11 won't boot after reboot/shutdown/battery removal, it stucks on loading screen. Wiping Dalvik, Cache and Data helps. Wiping only Dalvik and Cache cause system to boot, but it stucks again on loading apps window. Installing gapps solved problem for now.
2. WiFi not working. It's connecting properly to router, WiFi icon indicates that the data are transmitted, but none of system or custom app have internet connection. Tested on D-Link and Netgear.
Click to expand...
Click to collapse
I am using it and WiFi is working fine so far.

The Dark Knight said:
I am using it and WiFi is working fine so far.
Click to expand...
Click to collapse
#edited
Resolved by wipe & reinstall.

Theres no developers option in setting?
Sent from my C2105 using xda app-developers app

Sena Ferdy said:
Theres no developers option in setting?
Sent from my C2105 using xda app-developers app
Click to expand...
Click to collapse
Press Build number in About phone several times

what about root access?
I'm flash SuperSU from link in # root post, but it does't work.

Galmido said:
Several bugs have noticed so far:
1. If you don't have gapps, CM11 won't boot after reboot/shutdown/battery removal, it stucks on loading screen. Wiping Dalvik, Cache and Data helps. Wiping only Dalvik and Cache cause system to boot, but it stucks again on loading apps window. Installing gapps solved problem for now.
2. WiFi not working. It's connecting properly to router, WiFi icon indicates that the data are transmitted, but none of system or custom app have internet connection. Tested on D-Link and Netgear.
Click to expand...
Click to collapse
Delete

Morigotto said:
what about root access?
I'm flash SuperSU from link in # root post, but it does't work.
Click to expand...
Click to collapse
Flash this -
http://download.chainfire.eu/382/SuperSU/UPDATE-SuperSU-v1.93.zip
I've flashed it and it works fine.

Joery360 said:
Press Build number in About phone several times
Click to expand...
Click to collapse
I did but nothing happened :/
Hmm will try later
Sent from my C2105 using xda app-developers app

7z file userdata.img not have this correct?

ton095403 said:
7z file userdata.img not have this correct?
Click to expand...
Click to collapse
Yes, you can wipe data manually from recovery.

The Dark Knight said:
Flash this -
I've flashed it and it works fine.
Click to expand...
Click to collapse
Now, when I connect phone to PC, nothing happens. But I have root access.
Switching USB debugging on/off does nothing.

Morigotto said:
Now, when I connect phone to PC, nothing happens. But I have root access.
Switching USB debugging on/off does nothing.
Click to expand...
Click to collapse
Go into Storage>Open Menu>USB Connection>MTP.

Morigotto said:
Now, when I connect phone to PC, nothing happens. But I have root access.
Switching USB debugging on/off does nothing.
Click to expand...
Click to collapse
You've to connect your phone in Fastboot mode (Volume Up Key)

boot.img?
Do you have a kernel boot.img form? or if we can use another kernel (vengeance, thunderzap etc.)
Sorry my bad english :fingers-crossed:

18XET01 said:
Do you have a kernel boot.img form? or if we can use another kernel (vengeance, thunderzap etc.)
Sorry my bad english :fingers-crossed:
Click to expand...
Click to collapse
Use Phantom v5 for now.

how would i install the gapps...????
whenever i am trying to boot into recovery mode after flashing,the mobile hangs....then i have to remove the battery and i need to flash it again...

omkarmahananda said:
how would i install the gapps...????
whenever i am trying to boot into recovery mode after flashing,the mobile hangs....then i have to remove the battery and i need to flash it again...
Click to expand...
Click to collapse
Flash phantom kernel for CWM.. And then try .
Sent from my C2104 using Tapatalk

Here's the video after the first boot on CM11 - Alpha 2

Related

[Q] Unable to flash roms(have root)

Yes can someone plz help me i just rooted my nexus using the pdanet method. For some reason when i try to reboot in to recovery using rom manager i get that yellow tranagle i cant flash anything but i have root. any ideas and whats going wrong and how to fix this
Go into rom manager and reflash clockworkmod! that usually does the trick
Sent from my Nexus S using XDA Premium App
Ok tried that and it worked but the two roms i tried wont boot its like there stuck it just keeps looping any ideas on that
whitetiger2429 said:
Ok tried that and it worked but the two roms i tried wont boot its like there stuck it just keeps looping any ideas on that
Click to expand...
Click to collapse
because you need to wipe(factory reset) when flashing different roms. when you upgrade the same rom, you dont have to wipe.
i have and its still not working do i need to wipe cahce to
whitetiger2429 said:
i have and its still not working do i need to wipe cahce to
Click to expand...
Click to collapse
wiping data(factory reset) should take care of that. wipe, flash rom, flash gapps(if needed), and reboot. thats all.
done all that still gets stuck at the loading screen
ok got one to flash i did a cache wipe to and it seem to work ty
whitetiger2429 said:
Yes can someone plz help me i just rooted my nexus using the pdanet method. For some reason when i try to reboot in to recovery using rom manager i get that yellow tranagle i cant flash anything but i have root. any ideas and whats going wrong and how to fix this
Click to expand...
Click to collapse
I'm not sure why, but sometimes when I flash a recovery and reboot into recovery from ROM Manager, I get the same thing. But if I flash, then power off and boot into recovery using volume+powerUp, it works fine.

[Q] Help cyanogenmod boot animation

Hello,
I have a Verizon Galaxy S III, new, just followed the tutorial here: http://forum.xda-developers.com/showthread.php?t=1875914,
I used Rom Manager and tried to flash CM 10 from my external sd card and I got the following error message:
"E: failed to verify whole-file signature
E: signature verification failed"
from this point I was able to reboot the phone and the phone worked fine (with touchwiz and original android 4.0.4).
I then used EZ Rom from this tutorial to try to accomplish the same thing (http://forum.xda-developers.com/showthread.php?t=1762709)
I selected CWM 6.0.1 and it allowed me to select the nightly CM 10 zip file I had put on the external sd,
I then installed from sd the gapps from the same tutorial.
All appeared to be normal and I then rebooted the phone and now all it will do is show the cyanogenmod boot animation.
I have tried taking out the battery and restarting it but that does not fix things, I still get the cyanogenmod boot animation and nothing else.
Can anyone offer any suggestions? Sorry, I have searched the forums but cannot find an answer.
Regards,
M
Also, I believe I had accomplished rooting and unlocking correctly with the exception of no audio "Unlocked" message--that is, I only got a "your phone is unlocked" message on screen when I used the unlock app. I did not get the audio as the tutorial said I would.
Did you do a factory data reset?
Sent from my SCH-I535 using xda app-developers app
kintwofan said:
Did you do a factory data reset?
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
no i did not,
am I hosed?
thanks,
skybronco said:
no i did not,
I'm I hosed?
thanks,
Click to expand...
Click to collapse
No problem pull battery, put it in hold volume + home and power all at same time for recovery. Select data rest then select when done
Sent from my SCH-I535 using xda app-developers app
kintwofan said:
No problem pull battery, put it in hold volume + home and power all at same time for recovery. Select data rest then select when done
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
First off, thank you kintwofan for taking the time to help me, I appreciate it.
So I pulled the battery, held volume up+home key+pwr and was able to get into recovery,
I selected data reset
Now when I boot up the phone the cyanogenmod boot animation appears and I get a message "unfortunately, the process com.google.process.gapps has stopped and I can select ok
then I get a message set up wizard has stopped.
should I pull the battery and try to install from sd card the CM10 nightly zip file again?
Thanks,
I would say go back to recovery. Factory reset again, under advanced wipe dalvik cache and under mounts wipe system. The flash cm10 and I gapps again. By the way what gapps do you have?
Sent from my SCH-I535 using xda app-developers app
kintwofan said:
I would say go back to recovery. Factory reset again, under advanced wipe dalvik cache and under mounts wipe system. The flash cm10 and I gapps again. By the way what gapps do you have?
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
These are the gapps I have (JellyBean Gapps- //goo.im/gapps/gapps-jb-20121011-signed.zip
I will try your suggestions and report back,
Thanks,
M
kintwofan said:
I would say go back to recovery. Factory reset again, under advanced wipe dalvik cache and under mounts wipe system. The flash cm10 and I gapps again. By the way what gapps do you have?
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
I did the factory reset, then wiped dalvik cache, then I chose format/system under wipes and mount.
I then installed from external sd the CM10 nightly
I did not install the gapps zip file this time,
and rebooted.
now the phone boots up and and appears relatively normal (compared to my Galaxy nexus)
the android version says 4.2.1
However, there is no service, it does not connect to verizon.
if i make the screen black then hit power, the message at the bottom of the phone says "no sim card" but my sim card is installed (haven't taken it out at all)
What should I do next (can't tell you how much I appreciate this--I will pay you!!)
skybronco said:
I did the factory reset, then wiped dalvik cache, then I chose format/system under wipes and mount.
I then installed from external sd the CM10 nightly
I did not install the gapps zip file this time,
and rebooted.
now the phone boots up and and appears relatively normal (compared to my Galaxy nexus)
the android version says 4.2.1
However, there is no service, it does not connect to verizon.
if i make the screen black then hit power, the message at the bottom of the phone says "no sim card" but my sim card is installed (haven't taken it out at all)
What should I do next (can't tell you how much I appreciate this--I will pay you!!)
Click to expand...
Click to collapse
I can see that the gapps file was not for android 4.2.1 but rather 4.1
so starting over with the factory data reset etc, will report back soon, fyi i found a gapps for 4.2.1 here (http://goo.im/devs/PureMod/GAPPS/gapps-jb-20121130-4.2.1-signed.zip
skybronco said:
I can see that the gapps file was not for android 4.2.1 but rather 4.1
so starting over with the factory data reset etc, will report back soon, fyi i found a gapps for 4.2.1 here (http://goo.im/devs/PureMod/GAPPS/gapps-jb-20121130-4.2.1-signed.zip
Click to expand...
Click to collapse
I've successfully got the correct gapps on the phone now, but no service, it says no sim card
I took the sim out and re installed but no luck there, searched the forums and not successful at seeing a fix either,
any suggestions here?
Flash one if the unofficial builds from here and under mobile network change your subscription type to rui/sim
Sent from my SCH-I535 using xda app-developers app
kintwofan said:
Flash one if the unofficial builds from here
Click to expand...
Click to collapse
where?
and under mobile network change your subscription type to rui/sim
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
I'd like to use CM.
Is what you're referring to a rom from someone else?
Thanks again,
M

Steps before installing a custom ROM ?

I just rooted my Samsung GT-S5830i
I installed clockwork recover and made a backup too
I would like to install a custom ROM on my phone.. what are the necessary steps to follow before doing so ?
First, make a backup of you current rom. Then I would just go a head and follow whatever directions are supplied for the rom you want (some roms require special work). If no instructions are presented, do a wipe (factory reset or whatever) through cwmr, wipe the dalvik cache (under advanced), and install your rom!
Good luck I'll gladly answer any questions/problems you have.
Sent form my SGH-i927 running dman's cm10.1
scottbot95 said:
First, make a backup of you current rom. Then I would just go a head and follow whatever directions are supplied for the rom you want (some roms require special work). If no instructions are presented, do a wipe (factory reset or whatever) through cwmr, wipe the dalvik cache (under advanced), and install your rom!
Good luck I'll gladly answer any questions/problems you have.
Sent form my SGH-i927 running dman's cm10.1
Click to expand...
Click to collapse
i didnt do a factory reset, and installed jelly blast.. my phone got bricked, i had to flash through odin.. i was the only person who had the problem, you think it might have been because i didnt factory reset ?
hujjaini said:
i didnt do a factory reset, and installed jelly blast.. my phone got bricked, i had to flash through odin.. i was the only person who had the problem, you think it might have been because i didnt factory reset ?
Click to expand...
Click to collapse
It wasn't that.The only thing you must do before installing it is to root your phone, after that you just follow the custom rom's specific installing instructions.
unfragable said:
It wasn't that.The only thing you must do before installing it is to root your phone, after that you just follow the custom rom's specific installing instructions.
Click to expand...
Click to collapse
Last night, I tried it again, I downloaded the ported jelly blast v 3 for s5830i, made a back up of my current ROM, wiped my data, wiped dalvik cache, placed the jelly blast in my sd card and flashed it through clock work recovery, I still got stuck in a boot loop..
Hello,
Try toggling signature verification and then flash custom ROM. Hope this solves ur problem.
Sent from my LG-P350 using xda app-developers app
vivek_p08 said:
Hello,
Try toggling signature verification and then flash custom ROM. Hope this solves ur problem.
Sent from my LG-P350 using xda app-developers app
Click to expand...
Click to collapse
how do i toggle signature verification ?
You can see option for toggling in your recovery mode. Select that and then flash Rom.
Sent from my LG-P350 using xda app-developers app
vivek_p08 said:
You can see option for toggling in your recovery mode. Select that and then flash Rom.
Sent from my LG-P350 using xda app-developers app
Click to expand...
Click to collapse
There was no toggling option in my recovery mode..
Please do search properly. Usually u can see option for toggling signature verification when u select apply update from sdcard option....
If u can't find then try installing recovery mod again.
Sent from my LG-P350 using xda app-developers app
vivek_p08 said:
Please do search properly. Usually u can see option for toggling signature verification when u select apply update from sdcard option....
If u can't find then try installing recovery mod again.
Sent from my LG-P350 using xda app-developers app
Click to expand...
Click to collapse
I installed recovery again, I found the toggle signature verification option, could you tell me how toggling signature verification makes a difference?
By toggling signature verification, verification of digital sign of your zip file is skipped. Thus allowing to use/ flash ROMS( most of them are unsigned)
Did that work??
Sent from my LG-P350 using xda app-developers app
Sent from my GT-S5830i using xda app-developers app
I haven't tried it yet.. I'll let you know what happens when I try it though..
Thanks for all the info! Flashed my first couple roms (including CM10) and I am loving it compared to stock!
jokesonme said:
Thanks for all the info! Flashed my first couple roms (including CM10) and I am loving it compared to stock!
Click to expand...
Click to collapse
Don't just say it.... hit THANKS
The last couple of times I experienced this
The last couple of times that I got stuck in a bootloop, what fixed it was a re-wipe of data, cache and dalvik after the installation of the ROM. Don't know if that helps at all but hope that it does. That could be ROM specific, but it might be worth a shot (easier than restoring to stock again).
Examples of where developers have suggested wiping cache/dalvik after flashing the ROM
http://forum.xda-developers.com/showthread.php?t=1957348
http://forum.xda-developers.com/showthread.php?t=1822409
http://forum.xda-developers.com/showthread.php?t=1964339
Can't find where I saw the wipe data section, it was somewhere.
Also, I use SMS backup, which syncs SMS's with gmail, so you can back those up and restore should you change again. Available in the play store.

[Q] Can't reinstall apps after flashing CyanogenMod

I just rooted my Verizon Galaxy SIII (MF1) via Casual and flashed CM 10.1.2. Only problem is I can't reinstall any of my apps. I've tried pushing apps from my PC to my phone. Downloading while online from the phone itself. I used titanium backup and backed up everything before the flash, but I can't figure out how to access the data I backed up. Sorry, I'm a noob, but I searched for hours and couldn't find a solution to this specific problem.
(Also, my camera hasn't worked since the flash)
Did you flash the gapps package after flashing the rom?
Sent from the future via Tapatalk 4
edfunkycold said:
Did you flash the gapps package after flashing the rom?
Sent from the future via Tapatalk 4
Click to expand...
Click to collapse
Yes, and now I just get a message that says "Unfortunately, Setup Wizard has stopped." As soon as I press OK it pops up again instantly ad infinitum. And now my phone won't boot into recovery!
Go into recovery wipe cache and dalvik reflash the rom and gapps.
Edit: sorry missed the can't get into recovery. Do you have goo manager or rom Manager depending on which recovery you use and reflash recovery via app. If not as next user pointed out Odin is your friend.
Sent from the future via Tapatalk 4
edfunkycold said:
Go into recovery wipe cache and dalvik reflash the rom and gapps.
Sent from the future via Tapatalk 4
Click to expand...
Click to collapse
They just said that they can't get into recovery am I right? try using Odin or something similar to flash the latest version of cwm recovery then try wat edfunkycold suggested :thumbup: goodluck
Sent from my One X using xda app-developers app
edfunkycold said:
Go into recovery wipe cache and dalvik reflash the rom and gapps.
Sent from the future via Tapatalk 4
Click to expand...
Click to collapse
That's what I'm trying to do...unfortunately my phone will not boot into recovery. Holding down proper buttons does not work. And since I'm stuck on this error message I can't get to terminal app to reboot. And when I hold power button the "boot in recovery" option is not there.
windom--earle said:
That's what I'm trying to do...unfortunately my phone will not boot into recovery. Holding down proper buttons does not work. And since I'm stuck on this error message I can't get to terminal app to reboot. And when I hold power button the "boot in recovery" option is not there.
Click to expand...
Click to collapse
Turn the phone off. Then press HOME>POWER>VOLUME UP at the same time this will boot you into recovery.
Sent from the future via Tapatalk 4
lolz maybe they were using the wrong button combo all along
Sent from my One X using xda app-developers app
edfunkycold said:
Turn the phone off. Then press HOME>POWER>VOLUME UP at the same time this will boot you into recovery.
Sent from the future via Tapatalk 4
Click to expand...
Click to collapse
Ok, I got it to boot in recovery mode. I wiped dalvik and cache and then reflashed ROM and gapps. Still getting exact same error message.
windom--earle said:
Ok, I got it to boot in recovery mode. I wiped dalvik and cache and then reflashed ROM and gapps. Still getting exact same error message.
Click to expand...
Click to collapse
Then the only suggestion i have is to flash stock rooted rom or any TW rom and see if the phone works properly. Then we can proceed fresh again. If you run into issues on TW rom then a full odin to stock might be required.
Sent from the future via Tapatalk 4
all eaeuni
edfunkycold said:
Then the only suggestion i have is to flash stock rooted rom or any TW rom and see if the phone works properly. Then we can proceed fresh again. If you run into issues on TW rom then a full odin to stock might be required.
Sent from the future via Tapatalk 4
Click to expand...
Click to collapse
Ok I just flashed my stock rooted rom and everything seems to be working just fine. I think I'm going to hold off on flashing a custom rom again. Want to do some more research first. Thanks for everyone's help!

[Q] Randomly stopped booting?

I have had flashed the newest Mokee rom around a month ago. It has been working ever since fine. Lately it would freeze up and id have to take the battery out and reboot and it would be fine. But yesterday, it froze and I tried rebooting then it just wont boot. I left it for around 10 minutes and its still booting. I don't want to factory reset because I dont wanna lose all my stuff on the phone. Is there anything I can do?
d1eharddan said:
I have had flashed the newest Mokee rom around a month ago. It has been working ever since fine. Lately it would freeze up and id have to take the battery out and reboot and it would be fine. But yesterday, it froze and I tried rebooting then it just wont boot. I left it for around 10 minutes and its still booting. I don't want to factory reset because I dont wanna lose all my stuff on the phone. Is there anything I can do?
Click to expand...
Click to collapse
reflash a different rom your not going to get it to boot
Reboot your device to BMM recovery and wipe cache/delvic and fix permission.
Sent from my MB865 using xda app-developers app
minhajlk said:
Reboot your device to BMM recovery and wipe cache/delvic and fix permission.
Sent from my MB865 using xda app-developers app
Click to expand...
Click to collapse
It didnt work. So do I have any other option than to wipe it?
d1eharddan said:
It didnt work. So do I have any other option than to wipe it?
Click to expand...
Click to collapse
Reflash the rom and gapps
atrix2man said:
Reflash the rom and gapps
Click to expand...
Click to collapse
Didnt work either. Thanks though
d1eharddan said:
Didnt work either. Thanks though
Click to expand...
Click to collapse
There is a release version in mokee thread, download it and make a clean flash. Follow these steps;
Wipe cache, delvic and data
Flash mokee rom and reboot (do not flash GApps)
Let the ROM settle for about 20-30 minutes
Reboot to recovery and wipe cache and flash GApps.
Good luck.
minhajlk said:
There is a release version in mokee thread, download it and make a clean flash. Follow these steps;
Wipe cache, delvic and data
Flash mokee rom and reboot (do not flash GApps)
Let the ROM settle for about 20-30 minutes
Reboot to recovery and wipe cache and flash GApps.
Good luck.
Click to expand...
Click to collapse
It worked, thanks. I have that on system 3 and on system 4, the new slimKat and its really nice.

Categories

Resources