Hi. recently I have been trying to change the android_id, and ran into a problem in the process. i resulted to editing the setings.db file. since then after i fixed permissions, and restarted, now the home button doesn't respond. I know it isn't a hardware issue because when i press it the LED lights still respond by blinking when I push it, but that's it. please anyone? this is a gift
Jimshamyrock said:
Hi. recently I have been trying to change the android_id, and ran into a problem in the process. i resulted to editing the setings.db file. since then after i fixed permissions, and restarted, now the home button doesn't respond. I know it isn't a hardware issue because when i press it the LED lights still respond by blinking when I push it, but that's it. please anyone? this is a gift
Click to expand...
Click to collapse
Restoring the file should get it working as usual. If you don't just re flash your ROM. That's the only way I knit that will fix it. Or open your ROMs .zip. Locate the file and push it to your phone.
Sent from my Nexus 5 using Tapatalk
ok, I cant flash a new rom because i cant figure out how to connect unlock the boot loader. so where in the zip would be the setings.db file? so i can push it to the phone
Jimshamyrock said:
ok, I cant flash a new rom because i cant figure out how to connect unlock the boot loader. so where in the zip would be the setings.db file? so i can push it to the phone
Click to expand...
Click to collapse
I'm not sure, I don't own a lg.
Just open up a file explorer in your phone. Then just type in the search "settings.db" and it should should the file. Up the top it shows you what folder its in. Then just a find a ROM or stock ROM you're using then find it in that, then push the file to the destination in your phone using adb.
Sent from my Nexus 5 using Tapatalk
Maybe you use titanium to remove some development install. Here is it, on my phone
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SM-N900 using Tapatalk Pre
Related
I have an HTC Inc S and i had it rooted and it all was fine. After installing Tor it worked nice until one time i was installing an App from the market and then it stopped !! i waited long enough didn't get back to work and then i removed the battery. when trying to restart the device it didnt start and got stuck at the HTC boot logo...
i can access the recovery mode but it hangs before i am able to flash any ROM.
the factory rest is not working as it just freeze when i press it !
this is my bootloader screen:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Can anyone help me out with this ?!
Thanks a lot
Look for an ruu.
Google. Will fix it.
Sent from my PG86100 using Tapatalk
Didn't work !
I tried flashing the RUU.zip from the SD and i tried different ones but some doesn't work and others just stops when the progress bar reaches almost the end. and the phone freezes !!
the RUU's which are .exe on windows PC are mostly shared on filesharing sites and they all disabled the sharing option due to the new copyright problems !!
any idea on how to get those RUU's.exe other than filesharing sites ?!
thanks for ur reply
I assume your on a HTC Droid incredible 2 this is what you need
http://www.multiupload.com/MYOZFW9Q0Y
Then
Rename the file to "PG32IMG.zip" (without quotes)
Place it on the root of the SD Card, unplug the USB cable
Boot into the bootloader: turn off the device, hold power and volume down (make sure the phone is not connected to the computer)
Follow the on-screen directions
Sent from my PG86100 using Tapatalk
Media Fire link not valid !
This link on Mediafire is not valid ! it doesn't open anything !!
Would some one email me the Radio or upload the file to dropbox or Ubuntuone if thats possible
here is a photo of one of the Radios where it just stuck in the top of the progress bar after it gives me around 6 vibrations !!!
View attachment 897554
Hi,
I've been having problems with this phone, everytime I turn on the data plan it keeps poping up messages that all the process have stopped working so whenever I rebooted this keeps happening.
I tried going into recovery mode (e3) and wiping (factory reset) everything but this doesn't work, everything remains the same,
So I was trying to follow the guide to root it and load cwm recovery (from this post http://forum.xda-developers.com/showthread.php?t=1899736) but it is not working.
I installed the drivers and I'm able to see my device in the windows explorer but when I start the runme.bat to root the phone it just throws a bunch of error messages.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So i tried to load the cwm recovery using the flastool and the process completed with no problem (the green circle appeared) but when I turn on the phone it loads the stock e3 recovery mode.
Is my phone broken ? what do you guys suggest I do ?
thanks in advance
i have this problem to :S somebody can help us??
Liquid Gallant won't reboot
I've got the same issue as mentioned in the post before; does the owner found a solution for his issue?
I tried to follow the tutorial on this forum and got the same issue when installing the *. bat file. File runs but won't detect the phone and closes.
Untill now the problem persists; frequent crash and shut down while using (wathever what, phone, internet, apps,..). I have not much experience with smartphones but it seems to me the internal boot is corrupt. Are any possible tpols or hints available or should the item be returned to ACer (when you know their helpdesk and utility service is crap!)
Same problem
Hello,
I had the same problem last year. I couldn't hard reset ( tried the 2 ways: via the settings or via the volum button when you start). It doesn't reset anything. The applications closes by themselves and I cannot do anything.
Last year, I sent the phone under the warranty and they repaired it and sent to me back.
Now I have exactly the same problem but my phone is not under warranty anymore.
Does anyone found a solution ?
Thanks.
you can call me a fool in this case
but anyway please help..
so please, hear my whole story first, so that you can examine the solution quickly.
my phone is: samsung W gt-i8150, rom: Liquid Smooth 2.9. build 3
first story. i wanted to replace the phone.apk with the one cm 10.1 own. so i copy phone.apk from CM10.1 zip file (that i got from arco official site). i wanted to copy it to root/system/app with X-plore root manager. but i cannot copy it even with superuser previllage.
second story. with no desperate to try, i delete phone.apk from system/app. then error message shown "com.android. bla bla not working". i dont remember whole message. i press OK, but the message keep showing up. can not get rid of the message, i decided to turn off my phone by holding power key. and after reboot, phone dont show signal bar, and of course, i can not make a call eventhough phone app could be opened.
third story. i'd remembered from somewhere, that i can flash apk with zip. then i decided to experiment a bit. i dont read any tutorial how to make update.zip (that's my fatal mistake.. my bad). i make my 'own version' flashable zip. making the original LS zip as an example. i deleted everything, and leave some that i thought important as you can see below :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The 'phone.apk' there, is the one i copied from cm 10.1 zip folder.
finally i install the zip via cwm recovery hope it'll work. i have seen your first paragraph LS instalation, but then it said "failed". and NOW, my phone ended with bootloop. it just stuck at samsung logo.
PLEASE,, how to fix this?? i dont want to re-install all over from the start... :crying:
First off I will say this is the greatest tool I have ever came across and I am thankful for anyone that ad hand in its production. The tool of course is here http://forum.xda-developers.com/showthread.php?t=873466 and it has been working great for me. But earlier today I used winrar to open a com apk file and edit a specific txt file however I accidentally didn't un-click the "use as default program" box and now right-clicking and apk file will not display the decompile option or install to phone option any longer. I figured since the default program had been changed it was not being recognized by one click apk any longer so I deleted the default program for the apk file type in the registry and uninstalled then re installed the shellext for APK_OneClick however the right-click apk options still will not show. I can recompile folders to APKs but nothing else. Any help with this issue is greatly appreciated and thanks in advanced it is driving me crazy.
I am assuming my problem is fro the whole winrar accident as the icon provided with OneClick no longer is displayed for apk files either I just can't solve the issue.
-
Can anyone shed some light on this for me?
JoshMan619 said:
Can anyone shed some light on this for me?
Click to expand...
Click to collapse
hey did u got the solution. if not follow this
first typeOpen Run then type REGEDIT
Press the Enter key on the keyboard
Click Continue in the User Account Control dialog
if necessary
Browse to:
HKCU\Software\Microsoft\Windows
\CurrentVersion\Explorer\FileExts\.zip
(HKCU is HKEY_CURRENT_USER) - To do this:
Click the triangle next to each item (HKCU, then
Software, etc)
When you get to .apk click the right mouse on this next
Press the Delete
then install one click apk shellext-add
The directory is looks like below pic
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi, so i've been having trouble trying to use the AP file for the S8+ one ui update from "https://www.xda-developers.com/samsung-galaxy-s8-snapdragon-install-closed-one-ui-android-pie-beta/" I've downloaded the file 3 times now and i keep getting this error
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I've tried winrar, 7zip and the stock windows 10 file explorer to extract the zip file . Does anyone know why this happens and how to fix it?
milkydude12 said:
Hi, so i've been having trouble trying to use the AP file for the S8+ one ui update from "https://www.xda-developers.com/samsung-galaxy-s8-snapdragon-install-closed-one-ui-android-pie-beta/" I've downloaded the file 3 times now and i keep getting this error
I've tried winrar, 7zip and the stock windows 10 file explorer to extract the zip file . Does anyone know why this happens and how to fix it?
Click to expand...
Click to collapse
As far as I'm aware the update for pie beta should be installed via stock recovery. It is not a Odin flashable file
And this is why I suggested you not try the upgrade. Very easy, and I mean, very ease to brick your phone if you don't know what you're doing.
Jeff
zirt57 said:
And this is why I suggested you not try the upgrade. Very easy, and I mean, very ease to brick your phone if you don't know what you're doing.
Jeff
Click to expand...
Click to collapse
I didn't brick my phone XD. Rather I couldn't get pass step 1, nvm trying to flash the oneui.
milkydude12 said:
I didn't brick my phone XD. Rather I couldn't get pass step 1, nvm trying to flash the oneui.
Click to expand...
Click to collapse
Because you don't flash the oneui. You put the update.zip file on your external sd card, power off your phone, while powered off - press and hold the bixby button, press and hold the volume up button, continue holding them and press and hold the power button until you get into the recovery screen. Continue to follow the instructions on the page you linked to me...but these instructions were one that page.
Jeff
Sent from my SM-G955U using Tapatalk
Right there is no full rom for one ui yet. you can odin clean to the latest oreo update but then you must flash from sd or sideload from pc to apply the one ui update.