[Q]Odexed stock ROM - 1.22.401.1 + OTA - HTC One Mini

Hello
I have an HTC one mini, unlocked and rooted.
Unfortunately I don't get to it, to install the OTA.
I've tried the two ROMs
Odexed stock ROM - 1.22.401.1
Deodexed stock ROM - 1.22.401.1
both of JMZ.
That works with the deodexed no OTA, was already aware, but now everything I've tried to install the odexed OTA.
It will me displayed constantly, that there is an OTA.
But when I flash the stock recovery, relock bootloader and the OTA update, start it starts in the recovery, where after a short time, a red exclamation mark appears.
Can someone help me?
My Bootloader:
*** UNLOCKED ***
M4_UL PVT SHIP S-OFF RL
CID-11111111
HBOOT-2.19.0000
RADIO-1.19.40d.00.14
OpenDSP-v13.2.0268.0620
OS-1.32.502.3
P.S excuse me my bad English

you cant OTA with a unlocked bootloader as far as i know

correct - you have to revert your phone back to stock in order to receive an update. Simply wait for the latest version to be made into a flash-able ROM on xda.

PuffDaddy_d said:
correct - you have to revert your phone back to stock in order to receive an update. Simply wait for the latest version to be made into a flash-able ROM on xda.
Click to expand...
Click to collapse
i use a rooted Stock odexed ROM from JMZ and stock recovery 1.31.401.1
But if i start the OTA is comes first h**p://cdn.androidpolice.com/wp-content/uploads/2010/07/IMAG0014.jpg but ca. 30 sec later h**p://imageshack.us/a/img547/5011/recovery.jpg (photos are not mine)

Hi Guys,
i have bought as second hand used an htc one mini. I live in Italy, so no Us.
The device report the following info, made by the previous owner:
TAMPERED
RELOCKED
M4_UL PVT S-OFF RL
CID-VODAP102
HBOOT-2.19.0000
RADIO 1.20.40d.00.05
It has TWRP recovery and Android 4.2.2.
I would like to restock it, deleting "tampered" and "relocked"
anybody that can help me please? thank you in advance
C:\ADB-FASTBOOT>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.19.0000
(bootloader) version-baseband: 1.20.40d.00.05
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.31.161.2
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT386W**********
(bootloader) imei: 35**************
(bootloader) meid:
(bootloader) product: m4_ul
(bootloader) platform: HBOOT-8930
(bootloader) modelid: PO5820000
(bootloader) cidnum: VODAP102
(bootloader) battery-status: good
(bootloader) battery-voltage: 4232mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-99c875bb7f
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.100s

If the phone was s-off'ed using revone you can use a command to remove the tapered flag. not sure sure about the relocked flag though. But this has all been discussed before. Search Google "revone" and XDA HTC One mini for s-off threads. It's all there.
Sent from my HTC One using Xparent Green Tapatalk 2

RuffBuster said:
If the phone was s-off'ed using revone you can use a command to remove the tapered flag. not sure sure about the relocked flag though. But this has all been discussed before. Search Google "revone" and XDA HTC One mini for s-off threads. It's all there.
Sent from my HTC One using Xparent Green Tapatalk 2
Click to expand...
Click to collapse
I don't know how was s-offed ... i bought it as used .... any interesting suggestion to see how was s-offed?

Stefano Pech said:
I don't know how was s-offed ... i bought it as used .... any interesting suggestion to see how was s-offed?
Click to expand...
Click to collapse
Check one of the revone guides on here. There is a file you copy to your phones data folder on your root. Read the revone installation guide and see if the files from the guide were previously copied to your phone. If they are already there, then you should be using revone, if the previous user hasn't wiped the phone clean before selling it.
Else reinstall revone and use the commands provided in guide to remove the offending flags. Again not sure you can change the "relocked" flag.
Sent from my HTC One using Xparent Green Tapatalk 2

RuffBuster said:
Check one of the revone guides on here. There is a file you copy to your phones data folder on your root. Read the revone installation guide and see if the files from the guide were previously copied to your phone. If they are already there, then you should be using revone, if the previous user hasn't wiped the phone clean before selling it.
Else reinstall revone and use the commands provided in guide to remove the offending flags. Again not sure you can change the "relocked" flag.
Sent from my HTC One using Xparent Green Tapatalk 2
Click to expand...
Click to collapse
ok...thank you. i will let you know how it goes

Related

[Q] Need Help - Stuck at Hboot

Hi Guys, need your help on this.
I was using Fall Out Custom Rom. and then I want to restore back to my stock with S-ON of course. but after I run RUU, I've got bootloader version error, and right now just stuck in HBOOT/Fastboot. I cannot access ADB. I'm trying to find latest RUU, but there is no version higher than mine.
My Fastboot getvar all :
INFOversion: 0.5
INFOversion-bootloader: 0.98.0002
INFOversion-baseband: 3805.06.02.03_M
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.04.401.1
INFOproduct: saga
INFOplatform: HBOOT-7230
INFOmodelid: PG8810000
INFOcidnum: HTC__044
INFObattery-status: good
INFObattery-voltage: 4193mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 0e35ea5b
INFOhbootpreupdate: 12
INFOgencheckpt: 0
all: Done!
Are you able to help?
Thanks.
Remove your serial and IMEI from the post...
suku_patel_22 said:
Remove your serial and IMEI from the post...
Click to expand...
Click to collapse
Ok. Can help with my question?
Use Gold Card - Not working
I manage using gold card and flash ruu 2.10 but still not working cause my main version is > 3. Anybody can help? please....
try reading this thread
http://forum.xda-developers.com/showthread.php?t=1728513
some ideas you can try
You forgot to downgrade misc_version before restoring to stock.
Now, you have one of 2 options:
1) If your HBOOT is modified - you can fastboot flash recovery, connect by ADB, execute misc_version script in recovery (that step saves you ROM installation) to downgrade main version, and then execute RUU again.
2) If your HBOOT is stock and you can't do anything - you'll have to unlock it the HTC way, after unlock - execute all the above (including relocking the bootloader after main version is downgraded).
Jack_R1 said:
You forgot to downgrade misc_version before restoring to stock.
Now, you have one of 2 options:
1) If your HBOOT is modified - you can fastboot flash recovery, connect by ADB, execute misc_version script in recovery (that step saves you ROM installation) to downgrade main version, and then execute RUU again.
2) If your HBOOT is stock and you can't do anything - you'll have to unlock it the HTC way, after unlock - execute all the above (including relocking the bootloader after main version is downgraded).
Click to expand...
Click to collapse
Finally it solved, I manage to found firmware with main version bigger than mine, flash it, unlock via htc dev, install recovery, change version, and return to stock successfully.
Thank you very much.
hansgregory said:
Finally it solved, I manage to found firmware with main version bigger than mine, flash it, unlock via htc dev, install recovery, change version, and return to stock successfully. can i please have a link 2 the latest version 2 please please
Thank you very much.
Click to expand...
Click to collapse
i'm stuck on htc screen laptop wont identify usb would it be possible to get some idea of how you solved this problem please i would love to know cuz i'm in the same situation my gold card wont work i keep getting error main version is older or something like that please please any help would be very helpful my details below and i also have unlocked bootloader i also cant go into recovery it jus keeps booting to bootloader or the htc screen
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.00.0002
(bootloader) version-baseband: 3822.10.08.04_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 13.10.401.8
(bootloader) product: saga
(bootloader) platform: HBOOT-7230
(bootloader) modelid: PG8810000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4023mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: ebd3df7d
(bootloader) hbootpreupdate: 12
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.038s
kisame d shark said:
i'm stuck on htc screen laptop wont identify usb would it be possible to get some idea of how you solved this problem please i would love to know cuz i'm in the same situation my gold card wont work i keep getting error main version is older or something like that please please any help would be very helpful my details below and i also have unlocked bootloader i also cant go into recovery it jus keeps booting to bootloader or the htc screen
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.00.0002
(bootloader) version-baseband: 3822.10.08.04_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 13.10.401.8
(bootloader) product: saga
(bootloader) platform: HBOOT-7230
(bootloader) modelid: PG8810000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4023mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: ebd3df7d
(bootloader) hbootpreupdate: 12
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.038s
Click to expand...
Click to collapse
Since your hboot already using 2+, you can do following steps:
1. unlock your bootloader using htc dev
2. after unlocked, install recovery
3. go to recovery you've previous installed then connect usb and change misc version via adb
4. relock again the bootloader
5. then you can install the RUU
Hope this help.
unlock bootloader
hansgregory said:
Since your hboot already using 2+, you can do following steps:
1. unlock your bootloader using htc dev
2. after unlocked, install recovery
3. go to recovery you've previous installed then connect usb and change misc version via adb
4. relock again the bootloader
5. then you can install the RUU
Hope this help.
Click to expand...
Click to collapse
i have already unlocked my bootloader but every time i try to change my misc version my usb can't be recognized and i cant install any recovery to my device for some reason it keeps saying image fail or it flashes the image then i try to enter recovery mode then it just boots up to the htc logo and don't go into recovery
hansgregory said:
Finally it solved, I manage to found firmware with main version bigger than mine, flash it, unlock via htc dev, install recovery, change version, and return to stock successfully.
Thank you very much.
Click to expand...
Click to collapse
Hey hansgregory, I got the same problem you had. Would u kindly tell me where to find that firmware?? my phone is dead atm
Thank you,
ahmedsalahais said:
Hey hansgregory, I got the same problem you had. Would u kindly tell me where to find that firmware?? my phone is dead atm
Thank you,
Click to expand...
Click to collapse
Snap. I'm in exactly the same boat
I downloaded it from here :
http://forumt.xda-developers.com/showthread.php?t=1722571
extract the zip and get the firmware.zip
hansgregory said:
I downloaded it from here :
http://forumt.xda-developers.com/showthread.php?t=1722571
extract the zip and get the firmware.zip
Click to expand...
Click to collapse
Link does not work
EDIT - Manager to open the thread by right click (Copy link address) and paste into google, The link is for the Chinese OTA, Can you confirm that this works OK and is all in English
Thanks
dannyhoughton74 said:
Link does not work
EDIT - Manager to open the thread by right click (Copy link address) and paste into google, The link is for the Chinese OTA, Can you confirm that this works OK and is all in English
Thanks
Click to expand...
Click to collapse
It doesn't. At least in my case.
I had to add my cid to make it loadable but that's about it:
Loading .. [PG88IMG.zip]
Checking .. [PG88IMG.zip]
Then it returns to Fastboot menu again with nothing changed!
ahmedsalahais said:
It doesn't. At least in my case.
I had to add my cid to make it loadable but that's about it:
Loading .. [PG88IMG.zip]
Checking .. [PG88IMG.zip]
Then it returns to Fastboot menu again with nothing changed!
Click to expand...
Click to collapse
Hi Ahmed,
What is the version of your hboot? is it already 2.00+? if it is you can just unlock via htc dev to flash the recovery. No need to flash the firmware
kisame d shark said:
i have already unlocked my bootloader but every time i try to change my misc version my usb can't be recognized and i cant install any recovery to my device for some reason it keeps saying image fail or it flashes the image then i try to enter recovery mode then it just boots up to the htc logo and don't go into recovery
Click to expand...
Click to collapse
IMO is that you dont need to flash the firmware, since you already said that you've already unlock the bootloader. I did flash the firmware because i want to unlock my bootloader.
I download this recovery image www.4ext.net/ddl/saga/recovery.zip, I flash this image in fastboot and the recovery installed successfully, maybe you can try it also.
after that you can install tacoroot for temporary root and misc version your device image version, then you can install ruu afterward.
hansgregory said:
Hi Ahmed,
What is the version of your hboot? is it already 2.00+? if it is you can just unlock via htc dev to flash the recovery. No need to flash the firmware
Click to expand...
Click to collapse
My problem is complex. Hboot is 0.98.0002 so i can't use HTCDev to unlock. At the same time adb is not working so i can't s-off. RUUs of 2.x or 1.x do not work either as latest image was 3.x .
I think i need to upgrade Hboot (somehow) to enable HTCdev Unlock then downgrade and s-off. That may require RUU > 3.x ... and it must be RUU not OTA or update package.
My case was the same as yours thats why i flash the firmware so i can unlock my bootloader. But you are not able to flash from chinese ota i gave you earlier?
Sent from my HTC Desire S using xda app-developers app
hansgregory said:
My case was the same as yours thats why i flash the firmware so i can unlock my bootloader. But you are not able to flash from chinese ota i gave you earlier?
Sent from my HTC Desire S using xda app-developers app
Click to expand...
Click to collapse
At first i wasn't able to. Then i edited android-info.txt inside firmware.zip to fake it to support middle east. But it just load and check without asking for apply!

Official T-mobile RUU help

Hello, i'm new guy on this forum. I'm going back from s-off to s-on and official stock t-mobile ruu and i'm using tutorial form this forum. But then i try install RUU_Saga_TMO_UK_1.30.110.2_R_Radio_20.28b.30.0805U_38.03.02.11_M_release_180106_signed i'm getting this ERROR[170]: USB CONNECTION ERROR. But my phone is properly connected, i tried europe ruu(no usb erros), but then i got cid error.
Hboot 0.98.0000
cid t-mob005
Ok, turn in bootloader and now no usb error, but now i'm getting bootloader error 140. Any suggestions?
I'm using this ruu RUU_Saga_TMO_UK_1.30.110.2_R_Radio_20.28b.30.0805U_38.03.02.11_M_release_180106_signed
My phone info
(bootloader) version: 0.5
(bootloader) version-bootloader: 0.98.0000
(bootloader) version-baseband: 38.03.02.11_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.47.401.4
(bootloader) product: saga
(bootloader) platform: HBOOT-7230
(bootloader) modelid: PG8810000
(bootloader) cidnum: T-MOB005
(bootloader) battery-status: good
(bootloader) battery-voltage: 4200mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 361a7ba6
(bootloader) hbootpreupdate: 12
(bootloader) gencheckpt: 0
It seems that you used an European unbranded RUU. To fix you have to create a goldcard, use the 1.47.401.4 RUU again to have a booting system, then change the main version and after that flash the TMOB RUU again
Sent from my HTC Desire S
thanks, but now i got another problem, my phone turn only in bootloader(but i cant see it using adb devices). But i can choose fastboot and then i see my device using fastboot devices. So i'cant get card cid maybe there is another way to get goldcard?
cezzka said:
thanks, but now i got another problem, my phone turn only in bootloader(but i cant see it using adb devices). But i can choose fastboot and then i see my device using fastboot devices. So i'cant get card cid maybe there is another way to get goldcard?
Click to expand...
Click to collapse
Use this to get the CID
Then this to make the GoldCard
Big thanks to amidabuddha. Finally i flashed 1.47.401.4 RUU(phone is booting fine), so how i can change main version to install TMOB RUU?
cezzka said:
Big thanks to amidabuddha. Finally i flashed 1.47.401.4 RUU(phone is booting fine), so how i can change main version to install TMOB RUU?
Click to expand...
Click to collapse
Follow this guide.
When you are done I suggest to fill the offset 00000000 to 00000170 of your sdcard with zeroes (as it was before) because various users reported that running a device with a goldcard inside can cause issues.
amidabuddha said:
Follow this guide.
When you are done I suggest to fill the offset 00000000 to 00000170 of your sdcard with zeroes (as it was before) because various users reported that running a device with a goldcard inside can cause issues.
Click to expand...
Click to collapse
Thanks again ! you and this forum really helped me. Now i got what i wanted
Thanks
amidabuddha said:
Use this to get the CID
Then this to make the GoldCard
Click to expand...
Click to collapse
I've signed up JUST to say thanks for this post. Bacon saved.
Help!?
Im a bit confussed, im desperately trying to get back to stock ics but can work out how, i have what seems to be a rare cid: TMOB005, my phone is S-ON, can i use this method?
Thanks!
im having this exact problem same phone same ruu flashed
amidabuddha said:
It seems that you used an European unbranded RUU. To fix you have to create a goldcard, use the 1.47.401.4 RUU again to have a booting system, then change the main version and after that flash the TMOB RUU again
Sent from my HTC Desire S
Click to expand...
Click to collapse
im having this exact problem same phone same ruu flashed can you please tell me what is the 1.47.401.4ruu please give me a link where to download it also i tried to make a gold card think i did but i dont know how to use it as on my bootloader it dont say update from zip on sd card anymore also its got s-on. please help

[Q] Unbootable device

Hi guys, new here (don't judge! xD)
So I have had a HTC Sensation for almost a good year. Halfway through this year I decided to try get off stock sense and see what advantages rooting does so I unlocked the bootdevice following the instructions on HTC's website and managed to installed Cyanogenmod hassle free. Recently however, I have looked into getting Android Revolution HD and thought I would switch to see what it is like. This is where I started getting problems, I think it first started with me using Clockworkmod Recovery instead of 4EXT to install and secondly I forgot to use Smart Recovery in 4EXT.
Basically, I have tried formatting and wiping, using the superwipe script, trying to recover using my nandroid backup of CMod, trying to install a stock rom, tried to install the RUU exe file ("RUU_PYRAMID_ICS_etc...") but every time it tells me the ROM has successfully installed, I reboot and it gets stuck at the White Screen of Death with the green HTC logo (the one just before the "quietly brilliant" slogan (or the blue CMod man)). So at the moment I don't have a working phone
Code:
***unlocked ***
Pyramid PVT SHIP S-ON RL
HBOOT – 1.27.0000
eMMC-boot
Jan 13 2012,17:33:34
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.27.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.32.862.13
(bootloader) serialno:
(bootloader) imei:
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5811000
(bootloader) cidnum: VODAP021
(bootloader) battery-status: good
(bootloader) battery-voltage: 4069mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 617f0a98
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
I have tried to install "PG58IMG.zip" many times but have failed every time. It just says "Parsing" the zip file but doesn't actually install. I have tried USB 2.0 drivers, reinstalling the HTC drivers, trying to flash through CMD but it just won't work! Would you guys be ever so kind to help me out! I have tried looking at every related thread under HTC Sensation
First delete your imei and serial number foryou own safety
If you have still 4ext recovery installed enable smartflash and then immediately restore your nandroid backup
Before this format all partitions except sdcard from 4ext
If that fails flash the boot.img of your current rom manually
If you don't know how go in general section and search the thread for flashing roms with S-ON.do only extra 1 step
Sent from my HTC Sensation Z710e using xda premium
rzr86 said:
First delete your imei and serial number foryou own safety
If you have still 4ext recovery installed enable smartflash and then immediately restore your nandroid backup
Before this format all partitions except sdcard from 4ext
If that fails flash the boot.img of your current rom manually
If you don't know how go in general section and search the thread for flashing roms with S-ON.do only extra 1 step
Sent from my HTC Sensation Z710e using xda premium
Click to expand...
Click to collapse
Thank you!! I managed to get the stock HTC Rom running again by flashing a kernel using the HTC Sensation tool (I copied the boot.img out of the zip file) and ran the "Flash your kernel here". If I copied a the boot.img and flashed it from say "Android_Revolution_HD-Sensation_6.8.0_XE.zip\kernels\sebastian\" Do you think that may solve my problem?
rhys_mcg said:
Thank you!! I managed to get the stock HTC Rom running again by flashing a kernel using the HTC Sensation tool (I copied the boot.img out of the zip file) and ran the "Flash your kernel here". If I copied a the boot.img and flashed it from say "Android_Revolution_HD-Sensation_6.8.0_XE.zip\kernels\sebastian\" Do you think that may solve my problem?
Click to expand...
Click to collapse
Hi,
Look HERE
This guide will tell you everything you need to know.

Emergency, need proper RUU for One S Ville/s4

hey guys my first thread, and ill be begging for help -_-
so i rooted my htc one s ville s4( model pj40110) and after that i tried flashing a custom rom, and i soft bricked it
now it only boots up to hboot, i tried installing custom recovery and installing other roms as it was rooted, but nothing worked
well i know how to revert it to stock, but i for got to get the S-On to S-Off and now i can't find the specific ruu for my device
looked for a week, now i resort to help
please kindly help me through this, its an emergency
im posting my getvar data here
C:\Users\Lance\Downloads\fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.15.0000
(bootloader) version-baseband: 1.11.50.05.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT251W422764
(bootloader) imei:
(bootloader) product: vle
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ4011000
(bootloader) cidnum: ROGER001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3977mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-64bedd38
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.070s
my hboot is 2.15.0000
radio is 1.11.50.05.28
and if you need my version-main, every time i input fastboot getvar version-main, nothing shows,
it just shows version-main : (blank)
please guys do help me, its a friend's phone and he is leaving abroad in a few days
hogol said:
hey guys my first thread, and ill be begging for help -_-
so i rooted my htc one s ville s4( model pj40110) and after that i tried flashing a custom rom, and i soft bricked it
now it only boots up to hboot, i tried installing custom recovery and installing other roms as it was rooted, but nothing worked
well i know how to revert it to stock, but i for got to get the S-On to S-Off and now i can't find the specific ruu for my device
looked for a week, now i resort to help
please kindly help me through this, its an emergency
im posting my getvar data here
C:\Users\Lance\Downloads\fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.15.0000
(bootloader) version-baseband: 1.11.50.05.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT251W422764
(bootloader) imei: 352103050279088
(bootloader) product: vle
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ4011000
(bootloader) cidnum: ROGER001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3977mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-64bedd38
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.070s
my hboot is 2.15.0000
radio is 1.11.50.05.28
and if you need my version-main, every time i input fastboot getvar version-main, nothing shows,
it just shows version-main : (blank)
please guys do help me, its a friend's phone and he is leaving abroad in a few days
Click to expand...
Click to collapse
First of all, remove serial number and imei.
There's no Jelly Bean RUU for Rogers instead you can download OTA.
Sent from my Nexus 7 using Tapatalk HD
khan.orak said:
First of all, remove serial number and imei.
There's no Jelly Bean RUU for Rogers instead you can download OTA.
Sent from my Nexus 7 using Tapatalk HD
Click to expand...
Click to collapse
first
i can't figure out how to edit my original post
second
i tried looking, i really am not sure which ota ruu i need, hence the thread
it would be kind of you to help me find it please :fingers-crossed:
hogol said:
first
i can't figure out how to edit my original post
second
i tried looking, i really am not sure which ota ruu i need, hence the thread
it would be kind of you to help me find it please :fingers-crossed:
Click to expand...
Click to collapse
- There's option at the bottom of your first post to Edit it. Your serial/IMEI can be used for dangerous purposes.
- Refer to This Post to find the correct OTA.zip.
- To install the OTA.zip, there are a few steps to be done. What was the last ROM you installed? Did you update to JellyBean via OTA?
use this guide http://forum.xda-developers.com/showthread.php?t=2394165
khan.orak said:
- There's option at the bottom of your first post to Edit it. Your serial/IMEI can be used for dangerous purposes.
- Refer to This Post to find the correct OTA.zip.
- To install the OTA.zip, there are a few steps to be done. What was the last ROM you installed? Did you update to JellyBean via OTA?
use this guide http://forum.xda-developers.com/showthread.php?t=2394165
Click to expand...
Click to collapse
The last rom i had was 4.1.1 stock, and currently i have no rom installed, where the entire problem started
can i flash an OTA on a phone which has no rom?
plus i have downloaded this
OTA_Ville_U_JB_45_S_Rogers_WWE_3.16.631.8_1.11.50.05.28_10.27.50.08L_release_301897nn5lu23br8cg9q7l.zip
but i don't know how to install a zip to a phone with no rom -_-
and there are many rogers ota/ruu available
which one is for my phone?
hogol said:
The last rom i had was 4.1.1 stock, and currently i have no rom installed, where the entire problem started
can i flash an OTA on a phone which has no rom?
plus i have downloaded this
OTA_Ville_U_JB_45_S_Rogers_WWE_3.16.631.8_1.11.50.05.28_10.27.50.08L_release_301897nn5lu23br8cg9q7l.zip
but i don't know how to install a zip to a phone with no rom -_-
and there are many rogers ota/ruu available
which one is for my phone?
Click to expand...
Click to collapse
I have given the Rogers OTA in the above list refer to that.
That's the core RUU you have downloaded
Sent from my Nexus 7 using Tapatalk HD
khan.orak said:
I have given the Rogers OTA in the above list refer to that.
That's the core RUU you have downloaded
Sent from my Nexus 7 using Tapatalk HD
Click to expand...
Click to collapse
so i install the core ruu then the ota?
or the ota then the ruu?
and which ota do i need?
quite a few....
sorry for all the noob questions, my first time working with a htc
hogol said:
so i install the core ruu then the ota?
or the ota then the ruu?
and which ota do i need?
quite a few....
sorry for all the noob questions, my first time working with a htc
Click to expand...
Click to collapse
Sorry for my weird typos. I was half asleep while I was typing that. I realized it now.
That's the correct OTA you download. It is in the form of a zip file correct?
You can flash that OTA with the help of the method stated in my signature
..
Edit:
Lol man I can't stop laughing at my typos. And the subsequent question asked by you hahaha
Sent from my HTC One S using Tapatalk 4 Beta
khan.orak said:
Sorry for my weird typos. I was half asleep while I was typing that. I realized it now.
That's the correct OTA you download. It is in the form of a zip file correct?
You can flash that OTA with the help of the method stated in my signature
..
Edit:
Lol man I can't stop laughing at my typos. And the subsequent question asked by you hahaha
Sent from my HTC One S using Tapatalk 4 Beta
Click to expand...
Click to collapse
well followed your tut through fully
and now after step 14, my phone wont boot, not at all
my phone had no OS installed, the recovery was stock
and i flashed the firmware.zip, now the phone wont even boot, and it my pc detects it as an alcatel device :|
i have no idea whats happening
hogol said:
well followed your tut through fully
and now after step 14, my phone wont boot, not at all
my phone had no OS installed, the recovery was stock
and i flashed the firmware.zip, now the phone wont even boot, and it my pc detects it as an alcatel device :|
i have no idea whats happening
Click to expand...
Click to collapse
Can you go into bootloader/fastboot?
Sent from my Nexus 7 using Tapatalk HD
many mpurnm
khan.orak said:
Can you go into bootloader/fastboot?
Sent from my Nexus 7 using Tapatalk HD
Click to expand...
Click to collapse
nope, thats the problem
i would have continued following the tut if it booted into bootloader
its not responding at all :crying:
hogol said:
nope, thats the problem
i would have continued following the tut if it booted into bootloader
its not responding at all :crying:
Click to expand...
Click to collapse
no light blinks or anything?
Did you flash the firmware twice? at first it usually gives error.
---------- Post added at 02:36 PM ---------- Previous post was at 02:34 PM ----------
hogol said:
nope, thats the problem
i would have continued following the tut if it booted into bootloader
its not responding at all :crying:
Click to expand...
Click to collapse
But this method has worked for many people. Two of them reported yesterday.
at 10th step I had already given that you shouldn't flash firmware if you had already updated to jellybean.
But I seriously am think what could have could have caused the brick as the OTA matches with your firmware.
Did you do SuperCID?
Try VolDown+Power Button to go into bootloader.
khan.orak said:
no light blinks or anything?
Did you flash the firmware twice? at first it usually gives error.
Click to expand...
Click to collapse
yes done it twice
thing is
after it said done in command prompt, the green progressbar wouldn't leave, i mean it was stuck at the green progress bar
the thing is, i waited for a while for it to finish, a lil bit was left at the end in the progressbar, but it said done in command prompt
so after a lot of waiting, i just hard reset it, but after that the phone is not booting into bootloader and not responding at all
what is happening?
khan.orak said:
no light blinks or anything?
Did you flash the firmware twice? at first it usually gives error.
---------- Post added at 02:36 PM ---------- Previous post was at 02:34 PM ----------
But this method has worked for many people. Two of them reported yesterday.
at 10th step I had already given that you shouldn't flash firmware if you had already updated to jellybean.
But I seriously am think what could have could have caused the brick as the OTA matches with your firmware.
Did you do SuperCID?
Try VolDown+Power Button to go into bootloader.
Click to expand...
Click to collapse
i had jellybean 4.1.1 before but after rooting i tried installing a custom rom, but that failed and it left me with no OS on the phone at the end of it
hence i wanted to go back to stock
and no i didn't do superCID, dont even know what that is
hogol said:
i had jellybean 4.1.1 before but after rooting i tried installing a custom rom, but that failed and it left me with no OS on the phone at the end of it
hence i wanted to go back to stock
and no i didn't do superCID, dont even know what that is
Click to expand...
Click to collapse
Bro I can't find anything that you did incorrectly. I don't know what the problem is. But I think that incomplete firmware update bricked it.
khan.orak said:
Bro I can't find anything that you did incorrectly. I don't know what the problem is. But I think that incomplete firmware update bricked it.
Click to expand...
Click to collapse
but it said done in command prompt, and i waited for so long for it to finish, but it never finished
anything i can do to fix this??
hogol said:
but it said done in command prompt, and i waited for so long for it to finish, but it never finished
anything i can do to fix this??
Click to expand...
Click to collapse
Unless it turns on, there's nothing much we can do with it.
You can use this thread however http://forum.xda-developers.com/showthread.php?t=2116062
He unbricks HTC One S.
khan.orak said:
Unless it turns on, there's nothing much we can do with it.
You can use this thread however http://forum.xda-developers.com/showthread.php?t=2116062
He unbricks HTC One S.
Click to expand...
Click to collapse
cant believe this is happening to me
phone wont even respond to charging, absolutely nothing...
i dont know what to do now :crying:
ota/ruu
hogol said:
hey guys my first thread, and ill be begging for help -_-
so i rooted my htc one s ville s4( model pj40110) and after that i tried flashing a custom rom, and i soft bricked it
now it only boots up to hboot, i tried installing custom recovery and installing other roms as it was rooted, but nothing worked
well i know how to revert it to stock, but i for got to get the S-On to S-Off and now i can't find the specific ruu for my device
looked for a week, now i resort to help
please kindly help me through this, its an emergency
im posting my getvar data here
C:\Users\Lance\Downloads\fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.15.0000
(bootloader) version-baseband: 1.11.50.05.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT251W422764
(bootloader) imei:
(bootloader) product: vle
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ4011000
(bootloader) cidnum: ROGER001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3977mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-64bedd38
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.070s
my hboot is 2.15.0000
radio is 1.11.50.05.28
and if you need my version-main, every time i input fastboot getvar version-main, nothing shows,
it just shows version-main : (blank)
please guys do help me, its a friend's phone and he is leaving abroad in a few days
Click to expand...
Click to collapse
this is where i found what vi needed http://androidruu.com/?developer=Ville

[Q] Newbie stuck , would love some help guys

Hello Lads
Sorry to trouble you but ive read and read and tried and tried various options but no luck. I was up till two this morning and have been on this all day when I was supposed to be out with the wife. Shes not a happy bunny.
Got an HTC ONE S here on Vodafone, I can get into Bootloader and custom recovery twrp-2.7.1.0a-ville.img
but I cant load any image nothing, The phone wont boot and keeps restarting in a boot loop. I've tried various options and nothing.
I have reflashed stock recovery and tried to put a vodafone ruu on but I keep getting an error
htc android phone update rom utility 1.04 2011
error 140 bootloader version error
Click to expand...
Click to collapse
All I want to do is put a stock vodafone rom back on this phone but teh three ive tried give the same error
I thin I have to flash stock recovery
Then relock Bootloader through fastboot
Then run RUU while phone is in fastboot USB
Is this correct and can anyone point me to the correct RUU
details are
TAMPERED
UNLOCKED
VLE PVT SHIP ON RL
HBOOT -2 .15.0000
RADIO -1.15.50.05.29
OPENDSP - V31.1.0.45.0815
EMMC -BOOT
DEC 14 2012. 17:10:57-1
Click to expand...
Click to collapse
C:\fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.15.0000
(bootloader) version-baseband: 1.15.50.05.29
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT23SW403509
(bootloader) imei: 359901041141397
(bootloader) product: vle
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ4010000
(bootloader) cidnum: VODAP001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3944mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-64bedd38
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.067s
C:\fastboot>
Click to expand...
Click to collapse
Thanks for taking the time to read this , hope someone can put me out of my misery.
mitch127 said:
Hello Lads
Sorry to trouble you but ive read and read and tried and tried various options but no luck. I was up till two this morning and have been on this all day when I was supposed to be out with the wife. Shes not a happy bunny.
Got an HTC ONE S here on Vodafone, I can get into Bootloader and custom recovery twrp-2.7.1.0a-ville.img
but I cant load any image nothing, The phone wont boot and keeps restarting in a boot loop. I've tried various options and nothing.
I have reflashed stock recovery and tried to put a vodafone ruu on but I keep getting an error
All I want to do is put a stock vodafone rom back on this phone but teh three ive tried give the same error
I thin I have to flash stock recovery
Then relock Bootloader through fastboot
Then run RUU while phone is in fastboot USB
Is this correct and can anyone point me to the correct RUU
details are
Thanks for taking the time to read this , hope someone can put me out of my misery.
Click to expand...
Click to collapse
Try getting the ICS RUU instead of straight up JB then from there update to JB. Worth a try, hope this helps!
Sent from my SAMSUNG-SM-N900A using XDA Free mobile app
YoungDev said:
Try getting the ICS RUU instead of straight up JB then from there update to JB. Worth a try, hope this helps!
Sent from my SAMSUNG-SM-N900A using XDA Free mobile app
Click to expand...
Click to collapse
Thanks for replying to my question Pal.
I've managed to figure out how to unlock, root, get SuperCid, relock, get another unlock token and then eventually get S_ OFF,, which wouldn't work until I relocked then unlocked again with a new bin file.
Once I had done all this I re flashed a new twrp recovery, then flashed a new rom from recovery, then gapps.. Still cant the find a vodafone stock rom I was on but as I now have S Off I guess that doesnt matter and I can flash the european latest rom if i want to.
Thank you for taking the time to help me Mate, I am Grateful.
Im still on 1.15 radio and I think I will try to flash that next with the 1.20 or higher version to see if it helps with my phone signal which is not very good

Categories

Resources