Database Info

[Q] Need Help - Stuck at Hboot

Hi Guys, need your help on this.
I was using Fall Out Custom Rom. and then I want to restore back to my stock with S-ON of course. but after I run RUU, I've got bootloader version error, and right now just stuck in HBOOT/Fastboot. I cannot access ADB. I'm trying to find latest RUU, but there is no version higher than mine.
My Fastboot getvar all :
INFOversion: 0.5
INFOversion-bootloader: 0.98.0002
INFOversion-baseband: 3805.06.02.03_M
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.04.401.1
INFOproduct: saga
INFOplatform: HBOOT-7230
INFOmodelid: PG8810000
INFOcidnum: HTC__044
INFObattery-status: good
INFObattery-voltage: 4193mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 0e35ea5b
INFOhbootpreupdate: 12
INFOgencheckpt: 0
all: Done!
Are you able to help?
Thanks.

Remove your serial and IMEI from the post...

suku_patel_22 said:
Remove your serial and IMEI from the post...
Click to expand...
Click to collapse
Ok. Can help with my question?

Use Gold Card - Not working
I manage using gold card and flash ruu 2.10 but still not working cause my main version is > 3. Anybody can help? please....

try reading this thread
http://forum.xda-developers.com/showthread.php?t=1728513
some ideas you can try

You forgot to downgrade misc_version before restoring to stock.
Now, you have one of 2 options:
1) If your HBOOT is modified - you can fastboot flash recovery, connect by ADB, execute misc_version script in recovery (that step saves you ROM installation) to downgrade main version, and then execute RUU again.
2) If your HBOOT is stock and you can't do anything - you'll have to unlock it the HTC way, after unlock - execute all the above (including relocking the bootloader after main version is downgraded).

Jack_R1 said:
You forgot to downgrade misc_version before restoring to stock.
Now, you have one of 2 options:
1) If your HBOOT is modified - you can fastboot flash recovery, connect by ADB, execute misc_version script in recovery (that step saves you ROM installation) to downgrade main version, and then execute RUU again.
2) If your HBOOT is stock and you can't do anything - you'll have to unlock it the HTC way, after unlock - execute all the above (including relocking the bootloader after main version is downgraded).
Click to expand...
Click to collapse
Finally it solved, I manage to found firmware with main version bigger than mine, flash it, unlock via htc dev, install recovery, change version, and return to stock successfully.
Thank you very much.

hansgregory said:
Finally it solved, I manage to found firmware with main version bigger than mine, flash it, unlock via htc dev, install recovery, change version, and return to stock successfully. can i please have a link 2 the latest version 2 please please
Thank you very much.
Click to expand...
Click to collapse
i'm stuck on htc screen laptop wont identify usb would it be possible to get some idea of how you solved this problem please i would love to know cuz i'm in the same situation my gold card wont work i keep getting error main version is older or something like that please please any help would be very helpful my details below and i also have unlocked bootloader i also cant go into recovery it jus keeps booting to bootloader or the htc screen
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.00.0002
(bootloader) version-baseband: 3822.10.08.04_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 13.10.401.8
(bootloader) product: saga
(bootloader) platform: HBOOT-7230
(bootloader) modelid: PG8810000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4023mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: ebd3df7d
(bootloader) hbootpreupdate: 12
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.038s

kisame d shark said:
i'm stuck on htc screen laptop wont identify usb would it be possible to get some idea of how you solved this problem please i would love to know cuz i'm in the same situation my gold card wont work i keep getting error main version is older or something like that please please any help would be very helpful my details below and i also have unlocked bootloader i also cant go into recovery it jus keeps booting to bootloader or the htc screen
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.00.0002
(bootloader) version-baseband: 3822.10.08.04_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 13.10.401.8
(bootloader) product: saga
(bootloader) platform: HBOOT-7230
(bootloader) modelid: PG8810000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4023mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: ebd3df7d
(bootloader) hbootpreupdate: 12
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.038s
Click to expand...
Click to collapse
Since your hboot already using 2+, you can do following steps:
1. unlock your bootloader using htc dev
2. after unlocked, install recovery
3. go to recovery you've previous installed then connect usb and change misc version via adb
4. relock again the bootloader
5. then you can install the RUU
Hope this help.

unlock bootloader
hansgregory said:
Since your hboot already using 2+, you can do following steps:
1. unlock your bootloader using htc dev
2. after unlocked, install recovery
3. go to recovery you've previous installed then connect usb and change misc version via adb
4. relock again the bootloader
5. then you can install the RUU
Hope this help.
Click to expand...
Click to collapse
i have already unlocked my bootloader but every time i try to change my misc version my usb can't be recognized and i cant install any recovery to my device for some reason it keeps saying image fail or it flashes the image then i try to enter recovery mode then it just boots up to the htc logo and don't go into recovery

hansgregory said:
Finally it solved, I manage to found firmware with main version bigger than mine, flash it, unlock via htc dev, install recovery, change version, and return to stock successfully.
Thank you very much.
Click to expand...
Click to collapse
Hey hansgregory, I got the same problem you had. Would u kindly tell me where to find that firmware?? my phone is dead atm
Thank you,

ahmedsalahais said:
Hey hansgregory, I got the same problem you had. Would u kindly tell me where to find that firmware?? my phone is dead atm
Thank you,
Click to expand...
Click to collapse
Snap. I'm in exactly the same boat

I downloaded it from here :
http://forumt.xda-developers.com/showthread.php?t=1722571
extract the zip and get the firmware.zip

hansgregory said:
I downloaded it from here :
http://forumt.xda-developers.com/showthread.php?t=1722571
extract the zip and get the firmware.zip
Click to expand...
Click to collapse
Link does not work
EDIT - Manager to open the thread by right click (Copy link address) and paste into google, The link is for the Chinese OTA, Can you confirm that this works OK and is all in English
Thanks

dannyhoughton74 said:
Link does not work
EDIT - Manager to open the thread by right click (Copy link address) and paste into google, The link is for the Chinese OTA, Can you confirm that this works OK and is all in English
Thanks
Click to expand...
Click to collapse
It doesn't. At least in my case.
I had to add my cid to make it loadable but that's about it:
Loading .. [PG88IMG.zip]
Checking .. [PG88IMG.zip]
Then it returns to Fastboot menu again with nothing changed!

ahmedsalahais said:
It doesn't. At least in my case.
I had to add my cid to make it loadable but that's about it:
Loading .. [PG88IMG.zip]
Checking .. [PG88IMG.zip]
Then it returns to Fastboot menu again with nothing changed!
Click to expand...
Click to collapse
Hi Ahmed,
What is the version of your hboot? is it already 2.00+? if it is you can just unlock via htc dev to flash the recovery. No need to flash the firmware

kisame d shark said:
i have already unlocked my bootloader but every time i try to change my misc version my usb can't be recognized and i cant install any recovery to my device for some reason it keeps saying image fail or it flashes the image then i try to enter recovery mode then it just boots up to the htc logo and don't go into recovery
Click to expand...
Click to collapse
IMO is that you dont need to flash the firmware, since you already said that you've already unlock the bootloader. I did flash the firmware because i want to unlock my bootloader.
I download this recovery image www.4ext.net/ddl/saga/recovery.zip, I flash this image in fastboot and the recovery installed successfully, maybe you can try it also.
after that you can install tacoroot for temporary root and misc version your device image version, then you can install ruu afterward.

hansgregory said:
Hi Ahmed,
What is the version of your hboot? is it already 2.00+? if it is you can just unlock via htc dev to flash the recovery. No need to flash the firmware
Click to expand...
Click to collapse
My problem is complex. Hboot is 0.98.0002 so i can't use HTCDev to unlock. At the same time adb is not working so i can't s-off. RUUs of 2.x or 1.x do not work either as latest image was 3.x .
I think i need to upgrade Hboot (somehow) to enable HTCdev Unlock then downgrade and s-off. That may require RUU > 3.x ... and it must be RUU not OTA or update package.

My case was the same as yours thats why i flash the firmware so i can unlock my bootloader. But you are not able to flash from chinese ota i gave you earlier?
Sent from my HTC Desire S using xda app-developers app

hansgregory said:
My case was the same as yours thats why i flash the firmware so i can unlock my bootloader. But you are not able to flash from chinese ota i gave you earlier?
Sent from my HTC Desire S using xda app-developers app
Click to expand...
Click to collapse
At first i wasn't able to. Then i edited android-info.txt inside firmware.zip to fake it to support middle east. But it just load and check without asking for apply!

Emergency, need proper RUU for One S Ville/s4

hey guys my first thread, and ill be begging for help -_-
so i rooted my htc one s ville s4( model pj40110) and after that i tried flashing a custom rom, and i soft bricked it
now it only boots up to hboot, i tried installing custom recovery and installing other roms as it was rooted, but nothing worked
well i know how to revert it to stock, but i for got to get the S-On to S-Off and now i can't find the specific ruu for my device
looked for a week, now i resort to help
please kindly help me through this, its an emergency
im posting my getvar data here
C:\Users\Lance\Downloads\fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.15.0000
(bootloader) version-baseband: 1.11.50.05.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT251W422764
(bootloader) imei:
(bootloader) product: vle
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ4011000
(bootloader) cidnum: ROGER001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3977mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-64bedd38
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.070s
my hboot is 2.15.0000
radio is 1.11.50.05.28
and if you need my version-main, every time i input fastboot getvar version-main, nothing shows,
it just shows version-main : (blank)
please guys do help me, its a friend's phone and he is leaving abroad in a few days

hogol said:
hey guys my first thread, and ill be begging for help -_-
so i rooted my htc one s ville s4( model pj40110) and after that i tried flashing a custom rom, and i soft bricked it
now it only boots up to hboot, i tried installing custom recovery and installing other roms as it was rooted, but nothing worked
well i know how to revert it to stock, but i for got to get the S-On to S-Off and now i can't find the specific ruu for my device
looked for a week, now i resort to help
please kindly help me through this, its an emergency
im posting my getvar data here
C:\Users\Lance\Downloads\fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.15.0000
(bootloader) version-baseband: 1.11.50.05.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT251W422764
(bootloader) imei: 352103050279088
(bootloader) product: vle
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ4011000
(bootloader) cidnum: ROGER001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3977mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-64bedd38
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.070s
my hboot is 2.15.0000
radio is 1.11.50.05.28
and if you need my version-main, every time i input fastboot getvar version-main, nothing shows,
it just shows version-main : (blank)
please guys do help me, its a friend's phone and he is leaving abroad in a few days
Click to expand...
Click to collapse
First of all, remove serial number and imei.
There's no Jelly Bean RUU for Rogers instead you can download OTA.
Sent from my Nexus 7 using Tapatalk HD

khan.orak said:
First of all, remove serial number and imei.
There's no Jelly Bean RUU for Rogers instead you can download OTA.
Sent from my Nexus 7 using Tapatalk HD
Click to expand...
Click to collapse
first
i can't figure out how to edit my original post
second
i tried looking, i really am not sure which ota ruu i need, hence the thread
it would be kind of you to help me find it please :fingers-crossed:

hogol said:
first
i can't figure out how to edit my original post
second
i tried looking, i really am not sure which ota ruu i need, hence the thread
it would be kind of you to help me find it please :fingers-crossed:
Click to expand...
Click to collapse
- There's option at the bottom of your first post to Edit it. Your serial/IMEI can be used for dangerous purposes.
- Refer to This Post to find the correct OTA.zip.
- To install the OTA.zip, there are a few steps to be done. What was the last ROM you installed? Did you update to JellyBean via OTA?
use this guide http://forum.xda-developers.com/showthread.php?t=2394165

khan.orak said:
- There's option at the bottom of your first post to Edit it. Your serial/IMEI can be used for dangerous purposes.
- Refer to This Post to find the correct OTA.zip.
- To install the OTA.zip, there are a few steps to be done. What was the last ROM you installed? Did you update to JellyBean via OTA?
use this guide http://forum.xda-developers.com/showthread.php?t=2394165
Click to expand...
Click to collapse
The last rom i had was 4.1.1 stock, and currently i have no rom installed, where the entire problem started
can i flash an OTA on a phone which has no rom?
plus i have downloaded this
OTA_Ville_U_JB_45_S_Rogers_WWE_3.16.631.8_1.11.50.05.28_10.27.50.08L_release_301897nn5lu23br8cg9q7l.zip
but i don't know how to install a zip to a phone with no rom -_-
and there are many rogers ota/ruu available
which one is for my phone?

hogol said:
The last rom i had was 4.1.1 stock, and currently i have no rom installed, where the entire problem started
can i flash an OTA on a phone which has no rom?
plus i have downloaded this
OTA_Ville_U_JB_45_S_Rogers_WWE_3.16.631.8_1.11.50.05.28_10.27.50.08L_release_301897nn5lu23br8cg9q7l.zip
but i don't know how to install a zip to a phone with no rom -_-
and there are many rogers ota/ruu available
which one is for my phone?
Click to expand...
Click to collapse
I have given the Rogers OTA in the above list refer to that.
That's the core RUU you have downloaded
Sent from my Nexus 7 using Tapatalk HD

khan.orak said:
I have given the Rogers OTA in the above list refer to that.
That's the core RUU you have downloaded
Sent from my Nexus 7 using Tapatalk HD
Click to expand...
Click to collapse
so i install the core ruu then the ota?
or the ota then the ruu?
and which ota do i need?
quite a few....
sorry for all the noob questions, my first time working with a htc

hogol said:
so i install the core ruu then the ota?
or the ota then the ruu?
and which ota do i need?
quite a few....
sorry for all the noob questions, my first time working with a htc
Click to expand...
Click to collapse
Sorry for my weird typos. I was half asleep while I was typing that. I realized it now.
That's the correct OTA you download. It is in the form of a zip file correct?
You can flash that OTA with the help of the method stated in my signature
..
Edit:
Lol man I can't stop laughing at my typos. And the subsequent question asked by you hahaha
Sent from my HTC One S using Tapatalk 4 Beta

khan.orak said:
Sorry for my weird typos. I was half asleep while I was typing that. I realized it now.
That's the correct OTA you download. It is in the form of a zip file correct?
You can flash that OTA with the help of the method stated in my signature
..
Edit:
Lol man I can't stop laughing at my typos. And the subsequent question asked by you hahaha
Sent from my HTC One S using Tapatalk 4 Beta
Click to expand...
Click to collapse
well followed your tut through fully
and now after step 14, my phone wont boot, not at all
my phone had no OS installed, the recovery was stock
and i flashed the firmware.zip, now the phone wont even boot, and it my pc detects it as an alcatel device :|
i have no idea whats happening

hogol said:
well followed your tut through fully
and now after step 14, my phone wont boot, not at all
my phone had no OS installed, the recovery was stock
and i flashed the firmware.zip, now the phone wont even boot, and it my pc detects it as an alcatel device :|
i have no idea whats happening
Click to expand...
Click to collapse
Can you go into bootloader/fastboot?
Sent from my Nexus 7 using Tapatalk HD

many mpurnm
khan.orak said:
Can you go into bootloader/fastboot?
Sent from my Nexus 7 using Tapatalk HD
Click to expand...
Click to collapse
nope, thats the problem
i would have continued following the tut if it booted into bootloader
its not responding at all :crying:

hogol said:
nope, thats the problem
i would have continued following the tut if it booted into bootloader
its not responding at all :crying:
Click to expand...
Click to collapse
no light blinks or anything?
Did you flash the firmware twice? at first it usually gives error.
---------- Post added at 02:36 PM ---------- Previous post was at 02:34 PM ----------
hogol said:
nope, thats the problem
i would have continued following the tut if it booted into bootloader
its not responding at all :crying:
Click to expand...
Click to collapse
But this method has worked for many people. Two of them reported yesterday.
at 10th step I had already given that you shouldn't flash firmware if you had already updated to jellybean.
But I seriously am think what could have could have caused the brick as the OTA matches with your firmware.
Did you do SuperCID?
Try VolDown+Power Button to go into bootloader.

khan.orak said:
no light blinks or anything?
Did you flash the firmware twice? at first it usually gives error.
Click to expand...
Click to collapse
yes done it twice
thing is
after it said done in command prompt, the green progressbar wouldn't leave, i mean it was stuck at the green progress bar
the thing is, i waited for a while for it to finish, a lil bit was left at the end in the progressbar, but it said done in command prompt
so after a lot of waiting, i just hard reset it, but after that the phone is not booting into bootloader and not responding at all
what is happening?

khan.orak said:
no light blinks or anything?
Did you flash the firmware twice? at first it usually gives error.
---------- Post added at 02:36 PM ---------- Previous post was at 02:34 PM ----------
But this method has worked for many people. Two of them reported yesterday.
at 10th step I had already given that you shouldn't flash firmware if you had already updated to jellybean.
But I seriously am think what could have could have caused the brick as the OTA matches with your firmware.
Did you do SuperCID?
Try VolDown+Power Button to go into bootloader.
Click to expand...
Click to collapse
i had jellybean 4.1.1 before but after rooting i tried installing a custom rom, but that failed and it left me with no OS on the phone at the end of it
hence i wanted to go back to stock
and no i didn't do superCID, dont even know what that is

hogol said:
i had jellybean 4.1.1 before but after rooting i tried installing a custom rom, but that failed and it left me with no OS on the phone at the end of it
hence i wanted to go back to stock
and no i didn't do superCID, dont even know what that is
Click to expand...
Click to collapse
Bro I can't find anything that you did incorrectly. I don't know what the problem is. But I think that incomplete firmware update bricked it.

khan.orak said:
Bro I can't find anything that you did incorrectly. I don't know what the problem is. But I think that incomplete firmware update bricked it.
Click to expand...
Click to collapse
but it said done in command prompt, and i waited for so long for it to finish, but it never finished
anything i can do to fix this??

hogol said:
but it said done in command prompt, and i waited for so long for it to finish, but it never finished
anything i can do to fix this??
Click to expand...
Click to collapse
Unless it turns on, there's nothing much we can do with it.
You can use this thread however http://forum.xda-developers.com/showthread.php?t=2116062
He unbricks HTC One S.

khan.orak said:
Unless it turns on, there's nothing much we can do with it.
You can use this thread however http://forum.xda-developers.com/showthread.php?t=2116062
He unbricks HTC One S.
Click to expand...
Click to collapse
cant believe this is happening to me
phone wont even respond to charging, absolutely nothing...
i dont know what to do now :crying:

ota/ruu
hogol said:
hey guys my first thread, and ill be begging for help -_-
so i rooted my htc one s ville s4( model pj40110) and after that i tried flashing a custom rom, and i soft bricked it
now it only boots up to hboot, i tried installing custom recovery and installing other roms as it was rooted, but nothing worked
well i know how to revert it to stock, but i for got to get the S-On to S-Off and now i can't find the specific ruu for my device
looked for a week, now i resort to help
please kindly help me through this, its an emergency
im posting my getvar data here
C:\Users\Lance\Downloads\fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.15.0000
(bootloader) version-baseband: 1.11.50.05.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT251W422764
(bootloader) imei:
(bootloader) product: vle
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ4011000
(bootloader) cidnum: ROGER001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3977mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-64bedd38
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.070s
my hboot is 2.15.0000
radio is 1.11.50.05.28
and if you need my version-main, every time i input fastboot getvar version-main, nothing shows,
it just shows version-main : (blank)
please guys do help me, its a friend's phone and he is leaving abroad in a few days
Click to expand...
Click to collapse
this is where i found what vi needed http://androidruu.com/?developer=Ville

[Q] Newbie stuck , would love some help guys

Hello Lads
Sorry to trouble you but ive read and read and tried and tried various options but no luck. I was up till two this morning and have been on this all day when I was supposed to be out with the wife. Shes not a happy bunny.
Got an HTC ONE S here on Vodafone, I can get into Bootloader and custom recovery twrp-2.7.1.0a-ville.img
but I cant load any image nothing, The phone wont boot and keeps restarting in a boot loop. I've tried various options and nothing.
I have reflashed stock recovery and tried to put a vodafone ruu on but I keep getting an error
htc android phone update rom utility 1.04 2011
error 140 bootloader version error
Click to expand...
Click to collapse
All I want to do is put a stock vodafone rom back on this phone but teh three ive tried give the same error
I thin I have to flash stock recovery
Then relock Bootloader through fastboot
Then run RUU while phone is in fastboot USB
Is this correct and can anyone point me to the correct RUU
details are
TAMPERED
UNLOCKED
VLE PVT SHIP ON RL
HBOOT -2 .15.0000
RADIO -1.15.50.05.29
OPENDSP - V31.1.0.45.0815
EMMC -BOOT
DEC 14 2012. 17:10:57-1
Click to expand...
Click to collapse
C:\fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.15.0000
(bootloader) version-baseband: 1.15.50.05.29
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT23SW403509
(bootloader) imei: 359901041141397
(bootloader) product: vle
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ4010000
(bootloader) cidnum: VODAP001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3944mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-64bedd38
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.067s
C:\fastboot>
Click to expand...
Click to collapse
Thanks for taking the time to read this , hope someone can put me out of my misery.

mitch127 said:
Hello Lads
Sorry to trouble you but ive read and read and tried and tried various options but no luck. I was up till two this morning and have been on this all day when I was supposed to be out with the wife. Shes not a happy bunny.
Got an HTC ONE S here on Vodafone, I can get into Bootloader and custom recovery twrp-2.7.1.0a-ville.img
but I cant load any image nothing, The phone wont boot and keeps restarting in a boot loop. I've tried various options and nothing.
I have reflashed stock recovery and tried to put a vodafone ruu on but I keep getting an error
All I want to do is put a stock vodafone rom back on this phone but teh three ive tried give the same error
I thin I have to flash stock recovery
Then relock Bootloader through fastboot
Then run RUU while phone is in fastboot USB
Is this correct and can anyone point me to the correct RUU
details are
Thanks for taking the time to read this , hope someone can put me out of my misery.
Click to expand...
Click to collapse
Try getting the ICS RUU instead of straight up JB then from there update to JB. Worth a try, hope this helps!
Sent from my SAMSUNG-SM-N900A using XDA Free mobile app

YoungDev said:
Try getting the ICS RUU instead of straight up JB then from there update to JB. Worth a try, hope this helps!
Sent from my SAMSUNG-SM-N900A using XDA Free mobile app
Click to expand...
Click to collapse
Thanks for replying to my question Pal.
I've managed to figure out how to unlock, root, get SuperCid, relock, get another unlock token and then eventually get S_ OFF,, which wouldn't work until I relocked then unlocked again with a new bin file.
Once I had done all this I re flashed a new twrp recovery, then flashed a new rom from recovery, then gapps.. Still cant the find a vodafone stock rom I was on but as I now have S Off I guess that doesnt matter and I can flash the european latest rom if i want to.
Thank you for taking the time to help me Mate, I am Grateful.
Im still on 1.15 radio and I think I will try to flash that next with the 1.20 or higher version to see if it helps with my phone signal which is not very good

[Q] lot's of problems

Hi, not sure this is the correct place to ask but i have a sensation that is stuck in a boot loop( brought from EBay) and i wish to return it to stock, hboot is 1.27.0000 image is 3.32.161.11, radio 11.23.3504.07_m2, bootloader unlocked via HTCDev but S-ON and i cannot find a ruu or image to return to stock, (unable to boot into recovery phone just loop's) all the ruu's I've found i receive signature fail error, I've also tried several post's in the fourm that tell me how to flash a custom rom while being s-on but nothing seem's to work, again signature fail error I've also flashed several recovery images via fastboot all completed ok but ether bootloop or freeze my phone, being newish to flashing rom's ect am I doing something wrong?
Any help would be appreciated.

theconverter said:
Hi, not sure this is the correct place to ask but i have a sensation that is stuck in a boot loop( brought from EBay) and i wish to return it to stock, hboot is 1.27.0000 image is 3.32.161.11, radio 11.23.3504.07_m2, bootloader unlocked via HTCDev but S-ON and i cannot find a ruu or image to return to stock, (unable to boot into recovery phone just loop's) all the ruu's I've found i receive signature fail error, I've also tried several post's in the fourm that tell me how to flash a custom rom while being s-on but nothing seem's to work, again signature fail error I've also flashed several recovery images via fastboot all completed ok but ether bootloop or freeze my phone, being newish to flashing rom's ect am I doing something wrong?
Any help would be appreciated.
Click to expand...
Click to collapse
did you try this ruu?
RUU_Pyramid_ICS_Vodafone_UK_3.32.161.11_R_Radio_11.69A.3504.00U_11.23.3504.07
i can't find a working link right now

rzr86 said:
did you try this ruu?
RUU_Pyramid_ICS_Vodafone_UK_3.32.161.11_R_Radio_11.69A.3504.00U_11.23.3504.07
i can't find a working link right now
Click to expand...
Click to collapse
Hi,Yep tried that one still getting signed error.
Thanks for looking

You have to get an RUU according to your CID.Get into your bootloader (by pressing power + vol-) and when you see fastboot usb give the command fastboot getvar all.Then copy-paste everything here except your imei and serialno so we will be able to help you further. If you cannot find an RUU for your CID you have to S-OFF your device so you be able to change your cid. After that you can flash any RUU.
You probably have bootloop issues with custom roms because you are S-ON user and you have to flash mannually the kernel.Just extract the boot.img from the rom zip you flash from your recovery in the folder you have fastboot and then flash it from your bootloader by using the command fastboot flash boot boot.img.Then your custom Rom should be working. After that you can S-OFF your bootloader with runrummer or with juopunutbear as long as you have already unlocked your phone with HTC_dev.
** Also after S-OFF it would be nice to upgrade your radio to the latest. **

lot's of problems
Gatosbil said:
You have to get an RUU according to your CID.Get into your bootloader (by pressing power + vol-) and when you see fastboot usb give the command fastboot getvar all.Then copy-paste everything here except your imei and serialno so we will be able to help you further. If you cannot find an RUU for your CID you have to S-OFF your device so you be able to change your cid. After that you can flash any RUU.
You probably have bootloop issues with custom roms because you are S-ON user and you have to flash mannually the kernel.Just extract the boot.img from the rom zip you flash from your recovery in the folder you have fastboot and then flash it from your bootloader by using the command fastboot flash boot boot.img.Then your custom Rom should be working. After that you can S-OFF your bootloader with runrummer or with juopunutbear as long as you have already unlocked your phone with HTC_dev.
** Also after S-OFF it would be nice to upgrade your radio to the latest. **
Click to expand...
Click to collapse
Hi Gatosbil, info below many thanks for you help
rm-tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.27.0000
(bootloader) version-baseband: 11.23.3504.07_M2
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.32.161.11
(bootloader) serialno: ****************
(bootloader) imei: ****************
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5813000
(bootloader) cidnum: VODAP001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3929mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 617f0a98
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.568s

theconverter said:
Hi Gatosbil, info below many thanks for you help
rm-tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.27.0000
(bootloader) version-baseband: 11.23.3504.07_M2
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.32.161.11
(bootloader) serialno: ****************
(bootloader) imei: ****************
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5813000
(bootloader) cidnum: VODAP001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3929mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 617f0a98
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.568s
Click to expand...
Click to collapse
the only ruu you can use since you are on S-ON is the one i told you in my previous post
otherwise install 4ext recovery
enbale smartflash from 4ext
flash a custom rom
here is the latest version of 4ext
http://www.4shared.com/zip/WnSyLWMaba/4EXT_Recovery_Touch_v1006_RC3_.html
extract the recovery.img and flash it via fastboot command

rzr86 said:
the only ruu you can use since you are on S-ON is the one i told you in my previous post
otherwise install 4ext recovery
enbale smartflash from 4ext
flash a custom rom
here is the latest version of 4ext
extract the recovery.img and flash it via fastboot command
Click to expand...
Click to collapse
Thank you for your reply, I have run the ruu that you suggested in your first post but i'm still in a boot loop and being a ruu I do not know how to extract the boot image to flash it ( as this has stopped the boot loop problems in my previous phone). is there a boot.img available?
When i click on the link for 4ext you posted I cannot find the download link also can i flash 4ext being s-on
Looking forward to your reply.
Had to remove the outside link being a new member cant post outside link with less than 10 posts

theconverter said:
Thank you for your reply, I have run the ruu that you suggested in your first post but i'm still in a boot loop and being a ruu I do not know how to extract the boot image to flash it ( as this has stopped the boot loop problems in my previous phone). is there a boot.img available?
When i click on the link for 4ext you posted I cannot find the download link also can i flash 4ext being s-on
Looking forward to your reply.
Had to remove the outside link being a new member cant post outside link with less than 10 posts
Click to expand...
Click to collapse
in the ruu thread there is somewhere how to flash ruu manually
maybe from there you can locate the boot.img
about the recovery link i think you have to sign in in 4shared site
and yes you can flash 4ext while on S-ON as long as the bootloader is unlocked

rzr86 said:
in the ruu thread there is somewhere how to flash ruu manually
maybe from there you can locate the boot.img
about the recovery link i think you have to sign in in 4shared site
and yes you can flash 4ext while on S-ON as long as the bootloader is unlocked
Click to expand...
Click to collapse
I think ill give up with this phone, i have flashed 4ext via fastboot and still wont boot into recovery ( just loops)
also installed from sd card update ect ect still loops, could this be a hardware fault with the phone?

theconverter said:
I think ill give up with this phone, i have flashed 4ext via fastboot and still wont boot into recovery ( just loops)
also installed from sd card update ect ect still loops, could this be a hardware fault with the phone?
Click to expand...
Click to collapse
i really don't know mate

rzr86 said:
i really don't know mate
Click to expand...
Click to collapse
Hi, just a update ive fixed my phone, :laugh: done so by making a gold card following the tut's on this fourm installed 4ext via the card booted into recovery cleared dalvik cache ect and now boot's without any loop's.
Looking forward to flashing cyanogenmod and maybe going s-off
Many thanks for all your help and suggestions ill hit the thanks button for you.
Just need to mark as " solved " not sure how ( mod's ? )

Tried to convert to GPE, stuck in Fastboot

Hi,
A couple of weeks ago I got a new HTC One M8 Verizon from amazon. I bought it cause I wanted to covert it to GPE. After looking for some tutorials I decided to try the one described in this youtube video:
" How To: Convert HTC One M8 to Google Play Edition (5.0.1 Lollipop) with OTA Updates! " from MaowDroid - Since I'm a new user I can't post links, so I posted the video full name so you can look for it.
Later on I discovered I missed the " GSM Device (Not Sprint or Verizon) " legend in the video description. Very stupid of me! Anyway, everything went smooth until I flashed the image, then after restarting the device nothing happened and all I can do is to turn off the phone. If I choose HBOOT -> Recovery, the phone restarts. Same thing happens if I choose HBOOT -> Factory Reset.
Besides this video was not for my verizon device... I'm almost sure my second mistake was not to update the firmware before doing the whole process.. changing CID, ModelID and flashing the GPE image. I've been looking how to fix this but since I can't boot the OS I haven't been able to change the ModelID or CID, so whenever I've tried to flash a different image I get an error that says something about incorrect values, which from what I've learned in this process, its because those images are for different ModelID and CID values.
After that I asked for help in Android Forums ( http ://androidforums.com/threads/htc-one-m8-tried-to-convert-to-gpe-stuck-in-fastboot.931142/ ), where EarlyMon is being really nice and tried to help me resolve this issue. However it seems my problem is more difficult, so he suggested me to ask here so that we get more opinions to avoid making a fatal mistake. In summary, EarlyMon asked me to
1. flash recovery twrp-2.8.7.0-m8.img
2. Mount and Install ViperOneM8 4.3.0
Which I tried but at the end I get a Status 7 Error
-- Delete the spaces between "http:" and "//" --
http ://s13.postimg.org/4ktywhmzr/htconem8_Viper_One_M8_Error_Status7.jpg
Can you help me go to GPE or at least to Sense?
Any help will be really appreciated.
Thanks in advance.
PS.
This is my "fastboot getvar all" result and a picture of how fastboot looks when turning on or restarting the phone.
Code:
C:\Users\MIROSCAR\Desktop\HTC\miniadb_v1031>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.23.213311491.A13G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.04.1700.4
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid:
(bootloader) product: m8_wlv
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B17000
(bootloader) cidnum: GOOGL001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: eee2521c
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.017s
Fastboot Image
-- Delete the spaces between "http:" and "//" --
http ://s24.postimg.org/ag2jj3jn9/htconem8fastboot.jpg

karlangazz said:
Hi,
A couple of weeks ago I got a new HTC One M8 Verizon from amazon. I bought it cause I wanted to covert it to GPE. After looking for some tutorials I decided to try the one described in this youtube video:
" How To: Convert HTC One M8 to Google Play Edition (5.0.1 Lollipop) with OTA Updates! " from MaowDroid - Since I'm a new user I can't post links, so I posted the video full name so you can look for it.
Later on I discovered I missed the " GSM Device (Not Sprint or Verizon) " legend in the video description. Very stupid of me! Anyway, everything went smooth until I flashed the image, then after restarting the device nothing happened and all I can do is to turn off the phone. If I choose HBOOT -> Recovery, the phone restarts. Same thing happens if I choose HBOOT -> Factory Reset.
Besides this video was not for my verizon device... I'm almost sure my second mistake was not to update the firmware before doing the whole process.. changing CID, ModelID and flashing the GPE image. I've been looking how to fix this but since I can't boot the OS I haven't been able to change the ModelID or CID, so whenever I've tried to flash a different image I get an error that says something about incorrect values, which from what I've learned in this process, its because those images are for different ModelID and CID values.
After that I asked for help in Android Forums ( http ://androidforums.com/threads/htc-one-m8-tried-to-convert-to-gpe-stuck-in-fastboot.931142/ ), where EarlyMon is being really nice and tried to help me resolve this issue. However it seems my problem is more difficult, so he suggested me to ask here so that we get more opinions to avoid making a fatal mistake. In summary, EarlyMon asked me to
1. flash recovery twrp-2.8.7.0-m8.img
2. Mount and Install ViperOneM8 4.3.0
Which I tried but at the end I get a Status 7 Error
-- Delete the spaces between "http:" and "//" --
http ://s13.postimg.org/4ktywhmzr/htconem8_Viper_One_M8_Error_Status7.jpg
Can you help me go to GPE or at least to Sense?
Any help will be really appreciated.
Thanks in advance.
PS.
This is my "fastboot getvar all" result and a picture of how fastboot looks when turning on or restarting the phone.
Code:
C:\Users\MIROSCAR\Desktop\HTC\miniadb_v1031>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.23.213311491.A13G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.04.1700.4
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid:
(bootloader) product: m8_wlv
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B17000
(bootloader) cidnum: GOOGL001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: eee2521c
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.017s
Fastboot Image
-- Delete the spaces between "http:" and "//" --
http ://s24.postimg.org/ag2jj3jn9/htconem8fastboot.jpg
Click to expand...
Click to collapse
You can boot to hboot correct? First change CID back to Verizon, you can do this in hboot (bootloader)
fastboot devices (your device should be listed)
fastboot oem writecid VZW__001 (2 underscores)
fastboot reboot-bootloader
Then try flashing the Verizon RUU
http://forum.xda-developers.com/ver...zw-m8-master-ruu-firmware-collection-t2946473

andybones said:
You can boot to hboot correct? First change CID back to Verizon, you can do this in hboot (bootloader)
fastboot devices (your device should be listed)
fastboot oem writecid VZW__001 (2 underscores)
fastboot reboot-bootloader
Then try flashing the Verizon RUU
http://forum.xda-developers.com/ver...zw-m8-master-ruu-firmware-collection-t2946473
Click to expand...
Click to collapse
Hi,
Ok, but, maybe a dumb question but which S-OFF RUU version should I use (4.4.4, 4.4.3, 4.4.2 ) ?
Thanks for your help man!

karlangazz said:
Hi,
Ok, but, maybe a dumb question but which S-OFF RUU version should I use (4.4.4, 4.4.3, 4.4.2 ) ?
Thanks for your help man!
Click to expand...
Click to collapse
I'd use the latest 5.0.1

andybones said:
I'd use the latest 5.0.1
Click to expand...
Click to collapse
Hi,
I just tried the 5.0.1 RUU.
First I changed the CID as instructed.
Then I renamed and copied the zip file to the SD as suggested in the ROM instructions.
Rebooted and choosed HBOOT, the ROM is detected but, after a few minutes I get a " Update Fail! " error.
https ://drive.google.com/file/d/0BwRKcAC_V-OscVVhMjdNbHUyRkk/view?usp=sharing
Am I doing something wrong?

karlangazz said:
Hi,
I just tried the 5.0.1 RUU.
First I changed the CID as instructed.
Then I renamed and copied the zip file to the SD as suggested in the ROM instructions.
Rebooted and choosed HBOOT, the ROM is detected but, after a few minutes I get a " Update Fail! " error.
https ://drive.google.com/file/d/0BwRKcAC_V-OscVVhMjdNbHUyRkk/view?usp=sharing
Am I doing something wrong?
Click to expand...
Click to collapse
Honestly not too sure, hopefully someone more information than myself can chime in. Keep in mind this is just what I'd do. Anything you choose to do with your device is your choice.
maybe try changing cid to supercid
i think supercid will fix it
---------- Post added at 05:32 PM ---------- Previous post was at 05:18 PM ----------
karlangazz said:
Hi,
I just tried the 5.0.1 RUU.
First I changed the CID as instructed.
Then I renamed and copied the zip file to the SD as suggested in the ROM instructions.
Rebooted and choosed HBOOT, the ROM is detected but, after a few minutes I get a " Update Fail! " error.
https ://drive.google.com/file/d/0BwRKcAC_V-OscVVhMjdNbHUyRkk/view?usp=sharing
Am I doing something wrong?
Click to expand...
Click to collapse
Yea try supercid, then ruu again
fastboot oem writecid 1111111

andybones said:
Honestly not too sure, hopefully someone more information than myself can chime in. Keep in mind this is just what I'd do. Anything you choose to do with your device is your choice.
maybe try changing cid to supercid
i think supercid will fix it
---------- Post added at 05:32 PM ---------- Previous post was at 05:18 PM ----------
Yea try supercid, then ruu again
fastboot oem writecid 1111111
Click to expand...
Click to collapse
Hi,
I just changed to superCID, I just looked it up somewhere else cause I think yours was missing a 1.
So I changed my CID to superCID,
Rebooted and selected HBOOT.
I got the same error.
https ://drive.google.com/file/d/0BwRKcAC_V-OsZDZpQW5TV1dIU0U/view?usp=sharing
Hoperfully someone else may have some other ideas.
Thanks a lot for your help man!
All your suggestions are welcomed!

karlangazz said:
Hi,
I just changed to superCID, I just looked it up somewhere else cause I think yours was missing a 1.
So I changed my CID to superCID,
Rebooted and selected HBOOT.
I got the same error.
https ://drive.google.com/file/d/0BwRKcAC_V-OsZDZpQW5TV1dIU0U/view?usp=sharing
Hoperfully someone else may have some other ideas.
Thanks a lot for your help man!
All your suggestions are welcomed!
Click to expand...
Click to collapse
Install team viewer and pm me the details with a good time to screen share and fix your phone.
Sent from my HTC6535LVW using Tapatalk

dottat said:
Install team viewer and pm me the details with a good time to screen share and fix your phone.
Sent from my HTC6535LVW using Tapatalk
Click to expand...
Click to collapse
Thanks a lot for your help man!
The phone is now back to Sense and working!
I'll follow your advice and stick to ROMs no GPE!
Again, thank you very much for helping me save my device!
Regards!

karlangazz said:
Thanks a lot for your help man!
The phone is now back to Sense and working!
I'll follow your advice and stick to ROMs no GPE!
Again, thank you very much for helping me save my device!
Regards!
Click to expand...
Click to collapse
No problem man. Always glad to help!
Sent from my HTC6535LVW using Tapatalk

dottat said:
No problem man. Always glad to help!
Click to expand...
Click to collapse
Nicely done, magic.