Related
After manually installing Tango (8773) on my Samsung Focus S and using Jaxbot's workaround to keep it Interop unlocked, I keep getting an alert that a firmware update is available. Is it safe to update the firmware without losing my Interop unlock, or should I keep it at its current state?
revxx14 said:
After manually installing Tango (8773) on my Samsung Focus S and using Jaxbot's workaround to keep it Interop unlocked, I keep getting an alert that a firmware update is available. Is it safe to update the firmware without losing my Interop unlock, or should I keep it at its current state?
Click to expand...
Click to collapse
before updating you must make sure that you have done all your unlocks, interop, MMS, de branding, jaxbot relock work around etc,
you then must make a backup of your phone,
then you can apply the Samsung update, this WILL stop you unlocking, however because you have the unlocks already applied you will be able to re apply them if needed, (it wont allow you to add new xml data but as it was already applied before the update then you should be ok)
if you need to update your OS again I would strongly recommend that you revert to your PRE Samsung update backup
apply the new OS update,
make a new backup before applying the Samsung update again,
re apply the Samsung update an go from there.
ive heard of people having issues restoring backups when jumping across different versions of OS so making backups at each OS update BEFORE the Samsung update is probably a good habit to get in to,
its also a good habit to check that it is in fact interop/dev unlocked before applying the Samsung update
Firmware updates will not re-lock your phone (at least, none of them ever have). What they can do is prevent future hacks (unlocks or otherwise) from working.
If you already have WP7 Root Tools installed and working, you probably are afe to update. I do suggest creating a restore point first though, and backing up your old one.
I'm running CleamROM 8.2 on my phone. Everything that I read says that if you go back to OTA with the latest versions, you will loose root (which can be obtained), but you will lock the bootloader again, which can't be unlocked. Yeah, you can use a program to get around it, but it doesn't sound very clean or native.
Now that CleanROM is archived on the S3, I'm wondering what my options are to keep things up to date....specifically, the baseband. I know a few years ago, verizon pushed a basband update out that prevented 4g service...an update to that fixed it. I'm looking at updating the baseband to the latest safest one with the ability to keep the unlocked bootloader and root. Is VRBMF1 the latest and safest one to use? Should I be on something else? Can I just flash the baseband and move over to slimkat or carbon?
Thanks!
MF1 is the last firmware we can flash and still unlock the bootloader.
If you want to flash a newer modem, you can get the ML1. It may not improve your reception, but some claim they cannot text on it.
esjames said:
MF1 is the last firmware we can flash and still unlock the bootloader.
If you want to flash a newer modem, you can get the ML1. It may not improve your reception, but some claim they cannot text on it.
Click to expand...
Click to collapse
Thanks for the information. I'll probably end up where I'm at and move onto another ROM.
Hey Guys -
I've looked all through the forums for an answer, but couldn't find a concrete one nor one I was 100% would work for my specific device so decided to post the 3 questions I have...
I've got a Shield Tablet (Wi-Fi USA) which I bought pretty much on day one. Once Lollipop came out, I upgraded to it and in turn re-rooted it afterwards. About a week ago, i got the notification for the 5.0.1 OTA upgrade. I tried applying it by downloading the update then restarting when prompted, but when it came back up it was still at 5.0.0. I'm positive this is due to it being rooted and would still want (need) for it to be after the 5.0.1 upgrade so...
1. What's the best / safest way to apply 5.0.1 (from 5.0.0) to my tablet currently?
2. Will OTA not work if rooted which is why there are so many zip file links in the forums? If not, which update file do I need for USA WiFi only?
3. Once upgraded, what's the best / safest method for re-rooting again? I saw a few posts for how the bootloader needed to be unlocked. Don't know if that's still the latest info. Long way from Towel, huh?
I'm not asking anyone to spell it all out for me, but if you know what to do if you could send me links or whatever to the correct steps / files, I'd appreciate it.
Thanks guys!
(From later on in this thread)
Jaxas said:
Hello again, sorry to bother you guys but I'm seeing a surprising amount of conflicting information about this...
So I'm trying to upgrade to Nougat, but I'm having some troubles figuring out what I need to do for that.
I know I need to get my phone back to stock so I can accept the OTA update, but I'm not sure how to go about that.
My phone currently:
- Phone Model: HTC One A9 (Sprint - 2PQ93)
- Android Version: 6.0.1
- Software Version: 1.60.651.4
- Root: Yes
- Recovery: TWRP v2.8.8.2_CPTB-TEST2
- S: ON
- Bootloader: Unlocked
- Software Status: Modified
So as far as I'm aware, I need to restore the Stock recovery (how?), re-flash the RUU for my current software version, and then... relock the bootloader? Maybe?
So my questions are...
- How do I actually restore the stock recovery?
- Are there any steps I'm missing?
- Do I need to re-lock the bootloader, or does that not matter?
(- Is there anything I need to do once I get Nougat to root besides flash TWRP 3.0.3 & SuperSU through that?)
Thanks!
Click to expand...
Click to collapse
=============== ORIGINAL POST ===============
Hello,
I'm basically at my wit's end and I'd just like to see if anyone knows whether it's actually possible to get Android 7.0 Nougat on my phone?
I currently have a rooted, RUU-updated 6.0.1 build of Android (Version Number: 1.60.651.4) running on a Sprint (so CDMA) HTC One A9 (Model Number: 2PQ9300). My phone is still S-On (I'm willing to pay for Sunshine if it'll actually work for me, but I'd like to confirm that first), and due to the updating process I do not currently have TWRP - that's easily fixed, however.
Mostly, I'd just like to know if there's a way to get Android 7.0 on my phone, as it is not the International version, while also retaining things like mobile data and calling.
So far, I've looked into simply flashing the RUU (seems to be both not compatible with my phone version, and also has the signing issue mentioned Here), however with the signing issue I'd have to OTA update first so that's not relevant.
I've looked into Sunshine for S-OFF as well as This thread to convert to the "Unlocked" version that has the update, however I'm seeing comments about it not being compatible with the Sprint edition.
I've most recently tried to follow This guide, however I've had no luck and I'm still seeing talk of random reboots, dropped calls, and the like.
Basically, if there's any way I can get Android 7.0 Nougat on my phone, I would love to know how - if I can't (reasonably), then I'd also like to know that so I can stop beating my head into the wall, so to speak
Thanks!
Jaxas said:
Basically, if there's any way I can get Android 7.0 Nougat on my phone, I would love to know how - if I can't (reasonably), then I'd also like to know that so I can stop beating my head into the wall, so to speak
Thanks!
Click to expand...
Click to collapse
So far, the CDMA versions of the A9 can't run Nougat. As you know, HTC hasn't updated it for Nougat, and our phones run different enough firmware from the GSM-Locked and Dev versions that we can't use theirs. And so far, HTC's Dev Nougat requires Nougat firmware. So... we're boned.
Hopefully this won't be forever; HTC should eventually update American phones, so we'll just have to factory reset from system image (and maybe RUU) and OTA. For now, we can only hope guys like Captain_Throwback figure out how to backport Nougat to the 1.60.651.4 firmware.
Jaxas said:
Hello,
I'm basically at my wit's end and I'd just like to see if anyone knows whether it's actually possible to get Android 7.0 Nougat on my phone?
I currently have a rooted, RUU-updated 6.0.1 build of Android (Version Number: 1.60.651.4) running on a Sprint (so CDMA) HTC One A9 (Model Number: 2PQ9300). My phone is still S-On (I'm willing to pay for Sunshine if it'll actually work for me, but I'd like to confirm that first), and due to the updating process I do not currently have TWRP - that's easily fixed, however.
Mostly, I'd just like to know if there's a way to get Android 7.0 on my phone, as it is not the International version, while also retaining things like mobile data and calling.
So far, I've looked into simply flashing the RUU (seems to be both not compatible with my phone version, and also has the signing issue mentioned Here), however with the signing issue I'd have to OTA update first so that's not relevant.
I've looked into Sunshine for S-OFF as well as This thread to convert to the "Unlocked" version that has the update, however I'm seeing comments about it not being compatible with the Sprint edition.
I've most recently tried to follow This guide, however I've had no luck and I'm still seeing talk of random reboots, dropped calls, and the like.
Basically, if there's any way I can get Android 7.0 Nougat on my phone, I would love to know how - if I can't (reasonably), then I'd also like to know that so I can stop beating my head into the wall, so to speak
Thanks!
Click to expand...
Click to collapse
hey,
can you try this ...
https://forum.xda-developers.com/one-a9/general/htc-one-a9-android-7-nougat-t3546557
New info: Nougat is now available via OTA. Now we just need to... get back to full stock.
Woo! Just saw the notification. So now the question is if TWRP will work with 7.0 on our phones.. I think I'd rather keep root than upgrade and lose it if there's a choice.
JohnRogers23 said:
Woo! Just saw the notification. So now the question is if TWRP will work with 7.0 on our phones.. I think I'd rather keep root than upgrade and lose it if there's a choice.
Click to expand...
Click to collapse
TWRP 3.0.3 beta is available for nougat
MGfusion said:
TWRP 3.0.3 beta is available for nougat
Click to expand...
Click to collapse
I saw, but I'm not sure what's going on in the thread right now. It seems it sometimes bootloops? I'm hesitant to upgrade until there's either an RUU for 2.whatever out or I'm sure TWRP is reliable. I'm resigning myself to living without Xposed, but I at least need root and Magisk.
JohnRogers23 said:
Woo! Just saw the notification. So now the question is if TWRP will work with 7.0 on our phones.. I think I'd rather keep root than upgrade and lose it if there's a choice.
Click to expand...
Click to collapse
Whelp.
I'm upset, lol.
Time to re-reset my phone (finally got it set back up the way I wanted it yesterday on 6.0.1)
Oh well, thanks for the heads up!
I have the Sprint a9. I flashed the ruu and flashed TWRP 3.0.3-1 I believe, with no issues
Okay, so before I go re-wipe my phone and upgrade, I have a few quick questions...
1) Can this update be flashed with S-ON? (I'm assuming so, but always good to check) and
2) Can the Sprint A9 be rooted on Nougat yet?
Thanks!
I used TWRP 3.0.3.-4 and root with Magisk. Still miss Xposed, but the N features are pretty nice too. All seems to be working well.
Hello again, sorry to bother you guys but I'm seeing a surprising amount of conflicting information about this...
So I'm trying to upgrade to Nougat, but I'm having some troubles figuring out what I need to do for that.
I know I need to get my phone back to stock so I can accept the OTA update, but I'm not sure how to go about that.
My phone currently:
- Phone Model: HTC One A9 (Sprint - 2PQ93)
- Android Version: 6.0.1
- Software Version: 1.60.651.4
- Root: Yes
- Recovery: TWRP v2.8.8.2_CPTB-TEST2
- S: ON
- Bootloader: Unlocked
- Software Status: Modified
So as far as I'm aware, I need to restore the Stock recovery (how?), re-flash the RUU for my current software version, and then... relock the bootloader? Maybe?
So my questions are...
- How do I actually restore the stock recovery?
- Are there any steps I'm missing?
- Do I need to re-lock the bootloader, or does that not matter?
(- Is there anything I need to do once I get Nougat to root besides flash TWRP 3.0.3 & SuperSU through that?)
Thanks!
Jaxas said:
So as far as I'm aware, I need to restore the Stock recovery (how?), re-flash the RUU for my current software version, and then... relock the bootloader? Maybe?
So my questions are...
- How do I actually restore the stock recovery?
- Are there any steps I'm missing?
- Do I need to re-lock the bootloader, or does that not matter?
(- Is there anything I need to do once I get Nougat to root besides flash TWRP 3.0.3 & SuperSU through that?)
Thanks!
Click to expand...
Click to collapse
If you don't have an unmodified system image from before you mounted the system partition then yes, you do have to use an RUU, which will also give you stock recovery. No, you don't need to do anything with the bootloader.
Flash the RUU for the version you're on now, start up normally and take the OTA. No, I didn't have to do anything special besides making double checking /system is mounted read-only in TWRP. Personally I like using Magisk for root, etc, but I've heard SuperSU works fine. too. I'm S-on as well and it was all very easy.
I have a modified htc one a9 sprint, i want to get back to fully stock so i can update my device by using RUU side load. Please help
samweli benjamin said:
I have a modified htc one a9 sprint, i want to get back to fully stock so i can update my device by using RUU side load. Please help
Click to expand...
Click to collapse
What is your CID, MID and version-main? Is your bootloader locked or unlocked? S-ON or S-OFF?
I have attached a screenshot of getvar all for my device, when i was attemping to update it by using RUU its status was LOCKED and S-OFF but currently its status is **RE-LOCKED** and S-OFF
samweli benjamin said:
I have attached a screenshot of getvar all for my device, when i was attemping to update it by using RUU its status was LOCKED and S-OFF but currently its status is **RE-LOCKED** and S-OFF
Click to expand...
Click to collapse
What ruu version were you trying to flash and what was the error?
It was RUU_HIA_AERO_WHL_N70_SENSE80GP_SPCS_MR_Sprint_WWE_2.18.651.2 and the ERROR that I received was SIGNARURE ERROR: 132
samweli benjamin said:
It was RUU_HIA_AERO_WHL_N70_SENSE80GP_SPCS_MR_Sprint_WWE_2.18.651.2 and the ERROR that I received was SIGNARURE ERROR: 132
Click to expand...
Click to collapse
You can't flash a nougat ruu (2.xx.xxx.x) on a phone running the marshmallow firmware (1.xx.xxx.x). You need to manually update your firmware to 2.xx.651.x before being able to flash the 2.18.651.2 RUU. This is because the new signature key implemented in all 2.xx.xxx.x ruu, explained here at faq #4
Or you can flash the older 1.60.651.4 ruu and after, update your phone using OTA updates. Probably the easiest way for you :good:
http://dl3.htc.com/application/RUU_HIA_AERO_WHL_M60_SENSE7GP_SPCS_MR_Sprint_WWE_1.60.651.4.exe
This seems to be of great help to me, but am afraid i can't install the OTA in my device, b'se I received it and i did downloaded it but when i click to install it finish unzipping file and then fail and the phone boots in TWRP recovery so i thought i can update it by running a RUU side load
According to the Verizon Galaxy S5 Update Page:
Android® Security Patch Level: 2017–08-01
August 2017 Android security patches.
Fixed an issue where device was unable to connect and pair with some Bluetooth® Low Energy (BLE) devices.
Click to expand...
Click to collapse
Stock No-Wipe Firmware:
*This will remove Developer Status/Lock your Bootloader*
G900VVRU2DQH2_G900VVZW2DQH2_G900VVRU2DQH2_HOME.tar.md5.zip
Developer Bootloader Friendly/No Aboot No-Wipe Firmware:
G900VVRU2DQH2_G900VVZW2DQH2_G900VVRU2DQH2_HOME_No_Aboot.tar.md5.zip
This update prevent downgrading for older builds?
enmanuel255 said:
This update prevent downgrading for older builds?
Click to expand...
Click to collapse
I doubt it since the only time that really happens is when the number in the bootloader is increased.
For example, the first time the VZW S5 was updated to prevent downgrading was when the firmware version went from G900VVRU1BOD5 to G900VVRU2BOE1.
The VRU1 and VRU2 are the bootloader versions. Once updated to VRU2/VRS2, you can't go back to VRU1. For some reason they keep changing back and forth from VRU2 to VRS2 at random times. The past few updates have either been VRU2 or VRS2 but you can still go all the way back to the first firmware with VRU2.
TLDR; Since this firmware is using the VRU2 bootloader, it is very unlikely that it will prevent downgrading.
On a side note, this is the longest that it has taken for the complete Odin firmware to be uploaded to Samsung's servers. The update was out the 13th. Normally it takes 3 days for it to be available on their servers and it still isn't. I even tried using the Verizon Software Upgrade Assistant and both of my S5's say they are up to date on QF2.
It's rolled out:
Checking firmware for SM-G900V/VZW/G900VVRU2DQF2/G900VVZW2DQF2/G900VVRU2DQF2/G900VVRU2DQF2
Model: SM-G900V
Version: G900VVRU2DQH2/G900VVZW2DQH2/G900VVRU2DQH2/G900VVRU2DQH2
OS: Marshmallow(Android 6.0.1)
Filename: SM-G900V_1_20170824083446_06zw9gofua_fac.zip.enc4
Size: 2292181872 bytes
LogicValue: 0zmklm1qb9k6sfxe
Click to expand...
Click to collapse
P.S. I would not hurry with this upgrade. As for now I experience sound stuttering in my Samsung Level Active earbuds.
Trying to found out the cause but it definitely happened after bootloader/kernel/modems upgrade to DQH2.
bbsc said:
It's rolled out:
P.S. I would not hurry with this upgrade. As for now I experience sound stuttering in my Samsung Level Active earbuds.
Trying to found out the cause but it definitely happened after bootloader/kernel/modems upgrade to DQH2.
Click to expand...
Click to collapse
Yep I literally just saw that it was. I checked at 12:30am EST and it wasn't.
It's odd that you'd be having problems with bluetooth headphones since this update is supposed to fix bluetooth problems, other than the security related bluetooth problems.
Dudash said:
It's odd that you'd be having problems with bluetooth headphones since this update is supposed to fix bluetooth problems
Click to expand...
Click to collapse
See below.
Lost Hotspot Functionality
Once I flashed this update I lost the ability to bypass Verizon's check to use the hotspot functionality. Now it keeps checking my account and wanting me to pay for the service. Is there anyway I can get around this again, as I was able to with basic root?
I did flash the Developer Bootloader Friendly version using FlashFire.
In addition to my previous post.
Ok, I've been experimenting for a few days with two units of SM-G900V and two pairs of Samsung Level Active wireless earbuds.
I was walking in the same places and listening the same music in the same conditions with different earbuds and different phones, having different (DQF2 and DQH2) firmware (kernel, modem, recovery). In all cases the phones were loaded with the same /system ROM - stock-near ALEXNDR.G900FXXS1CQH1
My conclusion is: DQH2 keeps bluetooth connection much worse than DQF2.
I cannot say that we have a crystal-clear sound in one case and a crappy stuttering in the other.
But the difference is noticeable and obvious.
That's why I personally am reverting back to DQF2 firmware.
wbr.
Updated to this build from QA1, flashed in odin, then booted up, reflashed TWRP and SU, froze system updater all good. No problems here with BT streaming music 2hrs a day in my car for 3 days.
After Flashear everything is fine except autorotation, it does not work for me
Stock No-Wipe Firmware:
*This will remove Developer Status/Lock your Bootloader*
G900VVRU2DQH2_G900VVZW2DQH2_G900VVRU2DQH2_HOME.tar.md5.zip
Is there a full stock non rooted retail download available? I would like to revert completely to stock.
MrTrumpz said:
Stock No-Wipe Firmware:
*This will remove Developer Status/Lock your Bootloader*
G900VVRU2DQH2_G900VVZW2DQH2_G900VVRU2DQH2_HOME.tar.md5.zip
Is there a full stock retail download available? I would like to revert completely to stock.
Click to expand...
Click to collapse
That will return you to stock, it just won't delete all of your data.
If you want stock firmware that will completely wipe your device, you can go to my thread here.
Keep in mind that if you are on a firmware that has VRU2 or VRS2 in the name, you cannot downgrade to a firmware that has VRU1 in the name.
Dudash said:
That will return you to stock, it just won't delete all of your data.
If you want stock firmware that will completely wipe your device, you can go to my thread here.
Keep in mind that if you are on a firmware that has VRU2 or VRS2 in the name, you cannot downgrade to a firmware that has VRU1 in the name.
Click to expand...
Click to collapse
Thanks so much. I appreciate the response.
If i unlocked my bootloader on PB1 firmware, will I have issues flashing this firmware? For some reason I've always thought updating my firmware without updating the bootloader like I originally had to would cause some serious problems. Or did I misinterpret the necessity of updating the bootloader to match the firmware? Is that even an actual problem if they don't match?
Maphack said:
Is that even an actual problem if they don't match?
Click to expand...
Click to collapse
Nobody knows the exact answer except Samsung itself.
In most cases it works.
But this bootloader can be unlocked in the same way as the others if you have CID15.
bbsc said:
Nobody knows the exact answer except Samsung itself.
In most cases it works.
But this bootloader can be unlocked in the same way as the others if you have CID15.
Click to expand...
Click to collapse
Sorry, I was unclear. I unlocked my bootloader and chose PB1 as the firmware to be... Unlocked on, I guess? Not sure the proper phrasing for it.
So I have an unlocked bootloader, but am afraid of updating my firmware in case that messes up something.
If you already answered my question and my response to your question is just due to my lack of knowledge, I apologize.
@Maphack
Ok, let's clarify the things a little.
1. Locked bootloader is called "locked" because it doesn't boot custom unsigned kernels, i.e. rooted 6.0.1 kernels, TWRP kernels, kernels from kernel modders, etc.
2. Virtually all bootloaders in SM-G900V are locked by default.
3. Some of them can be unlocked if the phone has CID15.
4. People unlock bootloaders to install a custom recovery, to have root on 6.0.1, etc.
5. BPB1 is Android 5.0 and it does not require unlocked bootloader for to be rooted because root on 5.0 does not require kernel modification. So you may not know if it's locked or unlocked if you're on BPB1 currently.
But you can see it in download mode.
So if you want to update to QH2 or another 6.0.1 ROM, you need first:
1. Decide if you need root on 6.0.1.
2. Check the CID of your phone with EMMC Brickbug Check app from Market.
P.S. Probably I misunderstood you and your current firmware is not BPB1 but some 6.0.1 firmware and you are talking about BPB1 as about that firmware you've used to unlock bootloader on.
That's another story.
You can find directions how to update unlocked bootloader here.
bbsc said:
@Maphack
Ok, let's clarify the things a little.
1. Locked bootloader is called "locked" because it doesn't boot custom unsigned kernels, i.e. rooted 6.0.1 kernels, TWRP kernels, kernels from kernel modders, etc.
2. Virtually all bootloaders in SM-G900V are locked by default.
3. Some of them can be unlocked if the phone has CID15.
4. People unlock bootloaders to install a custom recovery, to have root on 6.0.1, etc.
5. BPB1 is Android 5.0 and it does not require unlocked bootloader for to be rooted because root on 5.0 does not require kernel modification. So you may not know if it's locked or unlocked if you're on BPB1 currently.
But you can see it in download mode.
So if you want to update to QH2 or another 6.0.1 ROM, you need first:
1. Decide if you need root on 6.0.1.
2. Check the CID of your phone with EMMC Brickbug Check app from Market.
P.S. Probably I misunderstood you and your current firmware is not BPB1 but some 6.0.1 firmware and you are talking about BPB1 as about that firmware you've used to unlock bootloader on.
That's another story.
You can find directions how to update unlocked bootloader here.
Click to expand...
Click to collapse
Thanks. Yeah, I'm already on an unlocked bootloader running 7.1.4. I'll look into updating an unlocked bootloader. I appreciate the help.
Or is there even a point for me to tweak my phone at this point?
Maphack said:
Or is there even a point for me to tweak my phone at this point?
Click to expand...
Click to collapse
None.
Modem upgrade, maybe...
But if you're satisfied, don't repair a working thing.
Help
Dudash said:
According to the Verizon Galaxy S5 Update Page:
Stock No-Wipe Firmware:
*This will remove Developer Status/Lock your Bootloader*
G900VVRU2DQH2_G900VVZW2DQH2_G900VVRU2DQH2_HOME.tar.md5.zip
Developer Bootloader Friendly/No Aboot No-Wipe Firmware:
G900VVRU2DQH2_G900VVZW2DQH2_G900VVRU2DQH2_HOME_No_Aboot.tar.md5.zip
Click to expand...
Click to collapse
Currently this is my System info.
Model - SM G900V
Baseband - G900VVRU2DPD1
Kernel - 3.4.0 [email protected] #1
Build Number - MMB29M.G900VVRU2DPF4
I flashed NI2 using Odin and have Safestrap. I have been away from this phone for long so lost touch of the updates. I have not flashed the Dev bootloader or unlocked it as far as I remember because when I installed this rom, there was no method to unlock bootloader. Can I still flash the QH2 update on this in Safestrap, the Developer Friendly version or the official.