hi,
i am using Revolution Rom 3.6.2 since a few days, but the accu drain is very heavy. So i deceided to change the kernel.
I tried Kernel Update Utility 0.9 and updating via CWM, both time i´m hanging in a boot loop.
can please someone tell me, how i change the kernel in Revolution ROM HD 3.6.2
The kernels i tried are therese:
FirstTimeKernle3.5
Pyramid Kernel 022z1 J Sense 1.56Ghz
Thank you !
can you describe the steps you take to flash the kernels?
firsttimekernel3.5 isnt a kernel at all. just so you know. only need to install if your coming from a different kernel. i guess but i find it unnecessary.
- downloading kernel.zip on my SD card
- reboot into HBOOT
- start Recovery (4ext Recovery v2.2.7 RC3)
- install from SD
- after install - reboot
- then boot loop
i also tried Kernel Update Utility 0.9 - step by step - but in the end i get a boot loop too.
try updating your recovery to RC5
also before you flash the kernel be sure to wipe cache and dalvik
ViperS for S3
with Venom Tweaks
Port
Yesterday, I spent some time today over a HTC One S S3 and in light of very few decent roms for this version, I wanted others to benefit from my findings.
I tried probably all available ROMs (not, that there were many to try), form various TrickDroids to a JB-based luxdroid v2, but in the end the best ROM turned out to be a ViperS port 4.0.4 ported by Chinese]. In my opinion, it blows all other S3 roms out of the water. Plus, it does not have the USB Mass Storage function replaced with the slow and annoying MTP storage, unlike JB Sense roms.
[/B][/SIZE] (Chinese/English).
(for HBOOT 2.11)
Aroma installer in Chinese. Follow defaults and you'll be fine.
Should automatically boot as English. If not, you can change it upon first boot.
Click to expand...
Click to collapse
(for HBOOT 2.09/2.11)
Aroma installer in (probably) English.
I haven't tried it but should work just fine.
Click to expand...
Click to collapse
]Sense 4 All In One Mod V28[/URL]
Works with 4.0.4
Should work with 4.0.3, too.
Click to expand...
Click to collapse
How to install:
Full wipe
Flash the ROM file
Flash Sense 4 All In One Mod add-on
Reboot to fastboot and flash appropriate boot image: fastboot flash boot boot_image_name.img
Wipe cache from fastboot: fastboot erase cache
Reboot
Useful links:
LINKS REMOVED
If you liked it, click the Thank You button.
That concludes my brief involvement with One S.
Thread Closed
You must first seek permission from the original creator of work before releasing. I have been informed this has not taken place, so i closed this thread. OP please PM me if you have a problem.
I have rooted my HTC Sensation XE.
Then I have tried to install [ROM] Revelation 1.0.1 | JB | Sense 4+ and [ROM][JB][Sense 4+][07.07] Team Venom 3.1.1.
But when the phone reboots it freezes when showing the HTC logo.
1. I press "down volume" and START
2. Recovery
3. Wipe data/factory reset
4. Advanced Wipe Dalvik cache
5. Wipe cache partition
6. Install zip from sdcard / Choose zip from sdcard/Revelation_1.0.0.zip - Yes, install
7. Clean install (Sensation XE)
Any ideas what can cause this?
parostberg said:
I have rooted my HTC Sensation XE.
Then I have tried to install [ROM] Revelation 1.0.1 | JB | Sense 4+ and [ROM][JB][Sense 4+][07.07] Team Venom 3.1.1.
But when the phone reboots it freezes when showing the HTC logo.
1. I press "down volume" and START
2. Recovery
3. Wipe data/factory reset
4. Advanced Wipe Dalvik cache
5. Wipe cache partition
6. Install zip from sdcard / Choose zip from sdcard/Revelation_1.0.0.zip - Yes, install
7. Clean install (Sensation XE)
Any ideas what can cause this?
Click to expand...
Click to collapse
You need to install 4EXT recovery. Enable smartflash (tools>enable smartflash). After that, you need to flash the boot.IMG of the ROM manually via adb.
Sent from my Ouya
parostberg said:
I have rooted my HTC Sensation XE.
Then I have tried to install [ROM] Revelation 1.0.1 | JB | Sense 4+ and [ROM][JB][Sense 4+][07.07] Team Venom 3.1.1.
But when the phone reboots it freezes when showing the HTC logo.
1. I press "down volume" and START
2. Recovery
3. Wipe data/factory reset
4. Advanced Wipe Dalvik cache
5. Wipe cache partition
6. Install zip from sdcard / Choose zip from sdcard/Revelation_1.0.0.zip - Yes, install
7. Clean install (Sensation XE)
Any ideas what can cause this?
Click to expand...
Click to collapse
Don't take me the wrong way, but this is a very common issue.
Take the time to Google and Search first!!!
You just need the proper boot.img.
Either flash it using fastboot, or use 4ext SmartFlash!!!
Far_SighT said:
Don't take me the wrong way, but this is a very common issue.
Take the time to Google and Search first!!!
You just need the proper boot.img.
Either flash it using fastboot, or use 4ext SmartFlash!!!
Click to expand...
Click to collapse
Thanks for the reply.
I used 4ext SmartFlash and got the ViperS installed. But then I got problem creating Exchange and Hotmail accounts, I also had repeted questions about accessing facebook with Sense.
Therefor I installed Revelation 1.0.0 instead.
Installation was fine, but I had a message telling that there was one update pending. It also gave information that I had to set S-OFF.
Now the phone just reboot when the HTC logo shows.
It doesn't help to restore the old working installation.
The smartflash is enabled in 4Ext, even if I disable smartflash, when I reboot and go to recovery and 4Ext, the smartflash is enabled...
Try flashing boot.img manually.
Extract boot.img from your current rom's zip.
Then put your phone in fastboot, mode and type:
fastboot flash boot boot.img
You may want to backup if you have data that you need to save.
Jam that thanks button.
Thanks, I will try that!
Far_SighT said:
Try flashing boot.img manually.
Extract boot.img from your current rom's zip.
Then put your phone in fastboot, mode and type:
fastboot flash boot boot.img
You may want to backup if you have data that you need to save.
Jam that thanks button.
Click to expand...
Click to collapse
By the way, should the Sensation XE be in S-OFF or S-ON for ViperS and Revelation?
Far_SighT said:
Try flashing boot.img manually.
Extract boot.img from your current rom's zip.
Then put your phone in fastboot, mode and type:
fastboot flash boot boot.img
You may want to backup if you have data that you need to save.
Jam that thanks button.
Click to expand...
Click to collapse
parostberg said:
By the way, should the Sensation XE be in S-OFF or S-ON for ViperS and Revelation?
Click to expand...
Click to collapse
ANY ROM can be flashed S-ON (based on your current firmware, of course). The above roms are based on 3.32/3.33. If you upgraded to ICS via HTC OTA, you're good to go S-ON.
You do need to enable 4ext SmartFlash if you're flashing S-ON though (or flash the boot partition manually).
Far_SighT said:
ANY ROM can be flashed S-ON (based on your current firmware, of course). The above roms are based on 3.32/3.33. If you upgraded to ICS via HTC OTA, you're good to go S-ON.
You do need to enable 4ext SmartFlash if you're flashing S-ON though (or flash the boot partition manually).
Click to expand...
Click to collapse
I use to boot.img from the zip file (it's only 8.1MB?)
C:\android>fastboot flash boot boot.img
sending 'boot' (8126 KB)...
OKAY [ 1.852s]
writing 'boot'...
OKAY [ 9.391s]
finished. total time: 11.249s
Then when I reboot the phone, the HTC logo appear and then dissappear and the screen is black... (I feel like a compete noobie...)
parostberg said:
I use to boot.img from the zip file (it's only 8.1MB?)
C:\android>fastboot flash boot boot.img
sending 'boot' (8126 KB)...
OKAY [ 1.852s]
writing 'boot'...
OKAY [ 9.391s]
finished. total time: 11.249s
Then when I reboot the phone, the HTC logo appear and then dissappear and the screen is black... (I feel like a compete noobie...)
Click to expand...
Click to collapse
Try this:
1. Enable SmartFlash.
2. Do nandroid backup.
3. Do a full wipe except sdcard.
4. Flash rom.
5. Reboot.
Jam that thanks button.
Far_SighT said:
Try this:
1. Enable SmartFlash.
2. Do nandroid backup.
3. Do a full wipe except sdcard.
4. Flash rom.
5. Reboot.
Jam that thanks button.
Click to expand...
Click to collapse
If I run: fastboot flash boot boot.img and then install the zip file. It works with ViperS 3.1.1. But it's not posible to add a Exchange account/Hotmail.
Anyone have a fix for this?
It's also possible to install Revelation 1.0.0, but I get a error message about pending update when installing the update 1.0.1... - but i am fine with ViperS if I can have the Exchange account working. I had the sam error in Revelation 1.0.0.
parostberg said:
If I run: fastboot flash boot boot.img and then install the zip file. It works with ViperS 3.1.1. But it's not posible to add a Exchange account/Hotmail.
Anyone have a fix for this?
It's also possible to install Revelation 1.0.0, but I get a error message about pending update when installing the update 1.0.1... - but i am fine with ViperS if I can have the Exchange account working. I had the sam error in Revelation 1.0.0.
Click to expand...
Click to collapse
See this.
JAM THAT THANKS BUTTON.
Thanks for the reply.
So the workarround is to install 3.0.0 and then backup the accounts, and then install 3.1.1 and restore the accounts.
How about adding accounts later?
I have also found a bug with background syncronisation with Facebook: I get a constant message that ask me to activate background syncronisation. And it comes back when choosing "Yes".
Is it only me that have these issues, if so, what's special with my installation/phone?
Far_SighT said:
See this.
JAM THAT THANKS BUTTON.
Click to expand...
Click to collapse
Pls HELP ME!
parostberg said:
I have rooted my HTC Sensation XE.
Then I have tried to install [ROM] Revelation 1.0.1 | JB | Sense 4+ and [ROM][JB][Sense 4+][07.07] Team Venom 3.1.1.
But when the phone reboots it freezes when showing the HTC logo.
1. I press "down volume" and START
2. Recovery
3. Wipe data/factory reset
4. Advanced Wipe Dalvik cache
5. Wipe cache partition
6. Install zip from sdcard / Choose zip from sdcard/Revelation_1.0.0.zip - Yes, install
7. Clean install (Sensation XE)
Any ideas what can cause this?
Click to expand...
Click to collapse
hello!
I have serious issues with mine (HTC Sensation xe)rooted, bootunlocked and -off. It was running ginger bread before so, i downloaded cyanogenmod 10.2 and the gapp. After installations from sd, i reboot and it loads to startup page and when i clicked on to select language, the phone just freezes and reboots on its own. I have flashed different kind of the cn 10.2 and even 10.1 and also gapps, its the same thing. I have wiped cache and dalkic. I have removed the sd card yet, its same thing:crying::crying:
pls, any1 with solution???
can also mail me ([email protected]) plzzz:good:
---------- Post added at 01:21 AM ---------- Previous post was at 01:16 AM ----------
hello!
I have serious issues with mine (HTC Sensation xe)rooted, bootunlocked and -off. It was running ginger bread before so, i downloaded cyanogenmod 10.2 and the gapp. After installations from sd, i reboot and it loads to startup page and when i clicked on to select language, the phone just freezes and reboots on its own. I have flashed different kind of the cn 10.2 and even 10.1 and also gapps, its the same thing. I have wiped cache and dalkic. I have removed the sd card yet, its same thing:crying::crying:
pls, any1 with solution???
can also mail me ([email protected]) plzzz:good:
HELP ME! said:
hello!
I have serious issues with mine (HTC Sensation xe)rooted, bootunlocked and -off. It was running ginger bread before so, i downloaded cyanogenmod 10.2 and the gapp. After installations from sd, i reboot and it loads to startup page and when i clicked on to select language, the phone just freezes and reboots on its own. I have flashed different kind of the cn 10.2 and even 10.1 and also gapps, its the same thing. I have wiped cache and dalkic. I have removed the sd card yet, its same thing:crying::crying:
pls, any1 with solution???
can also mail me ([email protected]) plzzz:good:
---------- Post added at 01:21 AM ---------- Previous post was at 01:16 AM ----------
hello!
I have serious issues with mine (HTC Sensation xe)rooted, bootunlocked and -off. It was running ginger bread before so, i downloaded cyanogenmod 10.2 and the gapp. After installations from sd, i reboot and it loads to startup page and when i clicked on to select language, the phone just freezes and reboots on its own. I have flashed different kind of the cn 10.2 and even 10.1 and also gapps, its the same thing. I have wiped cache and dalkic. I have removed the sd card yet, its same thing:crying::crying:
pls, any1 with solution???
can also mail me ([email protected]) plzzz:good:
Click to expand...
Click to collapse
post you bootloader details and what recovery do you have?
most probably its a incompatible firmware ..probably a ginger bread one ..after confirming this after he posted bootloader details ..he needs to flash 3.33 firmware
Pls HELP ME!
hello!
I have serious issues with my (HTC Sensation xe)rooted, boot unlocked and s-off. It was running ginger bread before so, i downloaded cyanogenmod 10.2 and the gapp. After installations from sd, i reboot and it loads to startup page and when i clicked on to select language, the phone just freezes and reboots on its own. I have flashed different kind of the cn 10.2 and even 10.1 and also gapps, its the same thing. I have wiped cache and dalkic. I have removed the sd card yet, its same thing
pls, any1 with solution???
can also mail me ([email protected]) plzzz
my bootloader details are:
*****UNLOCKED*****
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.18.000
RADIO-10.14.9035.02_2
eMMC-boot
Aug 2 2011,22:35:52
HELP ME! said:
hello!
I have serious issues with my (HTC Sensation xe)rooted, boot unlocked and s-off. It was running ginger bread before so, i downloaded cyanogenmod 10.2 and the gapp. After installations from sd, i reboot and it loads to startup page and when i clicked on to select language, the phone just freezes and reboots on its own. I have flashed different kind of the cn 10.2 and even 10.1 and also gapps, its the same thing. I have wiped cache and dalkic. I have removed the sd card yet, its same thing
pls, any1 with solution???
can also mail me ([email protected]) plzzz
my bootloader details are:
*****UNLOCKED*****
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.18.000
RADIO-10.14.9035.02_2
eMMC-boot
Aug 2 2011,22:35:52
Click to expand...
Click to collapse
man decrease the font size ..i get the point and solution is pretty simple for you
first relock the bootloader
to do that ...connect the phone from bootloader to pc ..(if properly connected phone should say FASTBOOT USB ..if its saying HBOOT ..press power button once )
then open command prompt from your adb/fastboot folder (i think you already have this folder ..if you did UNLOCK of bootloader ..generally on C:/Androidsdk/tools )
then type this command ..
fastboot oem lock
once that is done
go to firmware thread
link here
get the 3.33 universal firmware ...copy it to top of your sdcard (i mean to sdcard/ use a card reader to do this )
and flash it (flashing instructions in the same thread)
then install any ICS/JB ROM it should work
ganeshp said:
man decrease the font size ..i get the point and solution is pretty simple for you
first relock the bootloader
to do that ...connect the phone from bootloader to pc ..(if properly connected phone should say FASTBOOT USB ..if its saying HBOOT ..press power button once )
then open command prompt from your adb/fastboot folder (i think you already have this folder ..if you did UNLOCK of bootloader ..generally on C:/Androidsdk/tools )
then type this command ..
fastboot oem lock
once that is done
go to firmware thread
link here
get the 3.33 universal firmware ...copy it to top of your sdcard (i mean to sdcard/ use a card reader to do this )
and flash it (flashing instructions in the same thread)
then install any ICS/JB ROM it should work
Click to expand...
Click to collapse
he sent me a pm 2 days ago and i gave him the same solution
i don't know why he didn't do it yet
edit: is it necessary to lock the bootloader first?
rzr86 said:
he sent me a pm 2 days ago and i gave him the same solution
i don't know why he didn't do it yet
edit: is it necessary to lock the bootloader first?
Click to expand...
Click to collapse
yeah he might need to
sometimes the bootloader wont read the PG58IMG zip file from the sdcard
Here's a new ClockworkMod Recovery for the HTC Desire SV, attached below. For installing and rooting, see this guide.
Facts & figures:
- Based on CWM Recovery 6.0.1.2
- For Android ICS (4.0.4)
- Includes kernel from htcdev.com
0.8 Version:
- Screen offset when scrolling
- Can't mount /cache errors
0.9 Version (latest):
- More elegant way of patching the screen offset fix
- Added sd-ext
Credits go to Koushik for CWM Recovery in general. Source files can be found here, on github.
Remember to backup your firmware before flashing, and use "fastboot boot recovery-cm_magnids-eng-ics-0.8.img" first.
Let me know by posting if it works, and hit thanks button!
jheller said:
Here's a new ClockworkMod Recovery for the HTC Desire SV, attached below. For installing and rooting, see this guide.
Facts & figures:
- Based on CWM Recovery 6.0.1.2
- For Android ICS (4.0.4)
- Includes kernel from htcdev.com
0.8 Version:
- Screen offset when scrolling
- Can't mount /cache errors
0.9 Version (latest):
- More elegant way of patching the screen offset fix
- Added sd-ext
Credits go to Koushik for CWM Recovery in general. Source files can be found here, on github.
Remember to backup your firmware before flashing, and use "fastboot boot recovery-cm_magnids-eng-ics-0.8.img" first.
Let me know by posting if it works, and hit thanks button!
Click to expand...
Click to collapse
thanks
Installed this and works great. No more flickering..
However, when i try to flash int2ext, i am getting unable to mount volume ./external_sd.. Any fix to this issue. I am sure it is an recovery issue and since you mentioned it as "added ext_sd" support, i thought it would solve this mounting issue.
Any update on this from would be of great help.. Thanks in advance.
tried the same and installed 0.8 first and then 0.9.....now there is no flickering and a nice interface....thanks
thanks a lot...
one request can u update cwm recovery??
crazy89 said:
thanks a lot...
one request can u update cwm recovery??
Click to expand...
Click to collapse
I'm affraid I have to disappoint you, I stopped further development of this recovery for the HTC Desire SV. The issue with HTC is the s-on functionality, which prevents modification of the system apps, so I bought a Moto G 2nd gen.
Hi
Noob problem
HTC sensation XE
I had ViperS 3.1.2 and then updated via OTA to ViperS 3.1.3 and at last ViperS 3.1.4 (also via OTA). After that I got stuck on htc white screen.
I can go into recovery with 4ext and followed the steps form here - http://forum.xda-developers.com/showthread.php?t=2082978
1.Boot into Recovery
3.Wipe data/factory reset(Format /system,/cache,/data,etc)
4.Wipe Dalvik & Cache
[enable smart-flash before flashing] FOR S-ON users ONLY
5.Flash ROM [VIPERS JB ROM]
6.DONE
I have tried it with ViperS 3.1.2 (full rom) and ViperS 3.1.4 (full rom) and after I always get stuck on htc white screen.
Attached I posted the logs from ViperS 3.1.2 (full rom) and ViperS 3.1.4 (full rom) instalation
Since this is my 1st post, I'm unable to post it on the correct topic - http://forum.xda-developers.com/showthread.php?t=2216858
Every time I go into recovery mode with 4ext after installing the rom i get the message "4ext smartflash is currently set to update boot partition on next system start"
So apparently I have a problem on boot partition, because the update is never done.
Does anyone have an idea on to fix this?
I hope I'm not infringing any rules to post this question here.
Just to add some more info
I tried to restore a backup that I made, and still I get stuck on htc white screen.
I also tried to install ViperS 5.0.0 JB from here - http://forum.xda-developers.com/showthread.php?t=2531054 - and stillI get stuck on htc white screen.
Don't really now what else to try
smapxda said:
Just to add some more info
I tried to restore a backup that I made, and still I get stuck on htc white screen.
I also tried to install ViperS 5.0.0 JB from here - http://forum.xda-developers.com/showthread.php?t=2531054 - and stillI get stuck on htc white screen.
Don't really now what else to try
Click to expand...
Click to collapse
try this
format all partiotins except sdcard
enable smartflash
flash the rom
if it fails then flash the boot.img of the rom via fastboot command
the command is fastboot flash boot boot.img
Thanks for your reply
rzr86 said:
try this
format all partiotins except sdcard
enable smartflash
flash the rom
Click to expand...
Click to collapse
I actually had done this before
rzr86 said:
if it fails then flash the boot.img of the rom via fastboot command
the command is fastboot flash boot boot.img
Click to expand...
Click to collapse
And this solved the issue, I had already seen it in this post - http://forum.xda-developers.com/showpost.php?p=37229807&postcount=2 - before your reply.
I'm now putting ViperS 3.1.4 (full rom), because when I could start the phone it had the ViperS 5.0.0 JB (to many tries to fix the phone) and after a phew minutes I got to the conclusion that I prefer version 3.1.4
smapxda said:
Thanks for your reply
I actually had done this before
And this solved the issue, I had already seen it in this post - http://forum.xda-developers.com/showpost.php?p=37229807&postcount=2 - before your reply.
I'm now putting ViperS 3.1.4 (full rom), because when I could start the phone it had the ViperS 5.0.0 JB (to many tries to fix the phone) and after a phew minutes I got to the conclusion that I prefer version 3.1.4
Click to expand...
Click to collapse
I always forgot SmartFlash back in the days on S-ON.
Very scary to see this on a neatly new device
fool
STOP!! discussing about team venom, I hate it there are no tweaks, my one feels thousand times better then this!!
hi all, all can make is own choice to use it. plz Stop U
@PandaPower :
If u don't like it, because tweaks do not work, when it will be solve, u'll try it or no???
If no, let us talk about what we want and u talk in ure favourite ROm topic. thank u :good: