Hi guys,
as the title said i got a problem with running my tab2 in download mode.
when i run the device in dl mode my pc (win 7) shows it as samsung modem, and if i start in recovery mode it shows as adb device.
odin can find the device anyway but failed on any flash process.
when i run in dl mode i get several outpot from the console on the device:
Odin download mode (protocol2.1)
Reason: Force Key
Secue Mode: Secure
Check Signature: Check
Custom Binary Downloads: no (0counts)
Current Binary: Samsung official
waiting usb cable...
connected press the start of odin3!!
so device is seen in odin i choose the .md5 and get following odin output:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-espresso10rf-espresso10rfxx-gtp5100.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
after this my tab dl screen tells me following:
fail to download 8/sos data:2569... and so on
tegra_nand_write Error to download partition_odin err0xffffffff
after this i have to do a factory reset with recovery mode to get the tab working again because it want to connect to kies and make a force restore
i already flashed several mobile phones so i think i know what i have to do but with this tab... im just confused
i already tried to setup several drivers manually, tried pc´s with kies and pc´s which never had kies installed before...same issue
I tried several .md5 files
so my question is now... what am i doing wrong? how can i get the adb driver working in download mode not in recovery
hope someone can help me
cassialla said:
Hi guys,
as the title said i got a problem with running my tab2 in download mode.
when i run the device in dl mode my pc (win 7) shows it as samsung modem, and if i start in recovery mode it shows as adb device.
odin can find the device anyway but failed on any flash process.
when i run in dl mode i get several outpot from the console on the device:
Odin download mode (protocol2.1)
Reason: Force Key
Secue Mode: Secure
Check Signature: Check
Custom Binary Downloads: no (0counts)
Current Binary: Samsung official
waiting usb cable...
connected press the start of odin3!!
so device is seen in odin i choose the .md5 and get following odin output:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-espresso10rf-espresso10rfxx-gtp5100.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
after this my tab dl screen tells me following:
fail to download 8/sos data:2569... and so on
tegra_nand_write Error to download partition_odin err0xffffffff
after this i have to do a factory reset with recovery mode to get the tab working again because it want to connect to kies and make a force restore
i already flashed several mobile phones so i think i know what i have to do but with this tab... im just confused
i already tried to setup several drivers manually, tried pc´s with kies and pc´s which never had kies installed before...same issue
I tried several .md5 files
so my question is now... what am i doing wrong? how can i get the adb driver working in download mode not in recovery
hope someone can help me
Click to expand...
Click to collapse
brother i cannot remember but there is a thread here which installs adb on every pc so you can search or try it
Related
Hello,
I have a problem.
I used my Samsung Galaxy GT-P6800 until yesterday.
Yesterday I downloaded the latest version of kies and I installed it.
When I plugged my tablet to the program kies, this told me that there was an update available. So I accepted the upgrade.
Unfortunately not been successful upgrade. So I tried to make the recovery of the old firmware. I receveid again an error. Kies tells me to call the service center.
Now I am a tablet that does not turn on and that only goes in odin mode by holding down the power button plus the volume down button.
It should not be in recovery mode because if I try to press the power button for 10 seconds nothing happens.
How could I resolve the problem?
My tablet is not rooted.
I don't know what is the problem because doesn't compare the code error.
I do not know if it depends on the driver. I do not know if it depends on something else.
But I would like to re-use my tablet. Help me, please.
well,
I have used Odin to install CWM 6.0.3.0.
Then I have tried to install a rom take here: http://forum.xda-developers.com/showpost.php?p=21930183&postcount=2
P6800OXALQ2_P6800XXLQ2_HOME.tar.md5
but i read this message on Odin app.
Odin Log:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P6800OXALQ2_P6800XXLQ2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> cache.img
<ID:0/005> NAND Write Start!!
<ID:0/005> factoryfs.img
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
How can I resolve, please?
Hello there, i have 2 same phones (my and sisters). On mine i long time ago flashed cwm via Odin and get root to work.
Today i am trying to flash cwm via Odin on second (sisters) S6310, but i simply cant - in download phone i get error SECURE: Signature verification failed no mather what i want to flash via Odin...
Odins 3.10 log:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> kyleopen-cwm5-v3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
^ looks clear but device still show me this* SVF error >.<
Got root on phone via vRoot.
Please help me and get that download mode to work....
ZeroGoCZ said:
Hello there, i have 2 same phones (my and sisters). On mine i long time ago flashed cwm via Odin and get root to work.
Today i am trying to flash cwm via Odin on second (sisters) S6310, but i simply cant - in download phone i get error SECURE: Signature verification failed no mather what i want to flash via Odin...
[...]
Got root on phone via vRoot.
Please help me and get that download mode to work....
Click to expand...
Click to collapse
I had the same problem. If you're rooted you can install CWM via BTE shell script, too: http://forum.xda-developers.com/showthread.php?p=58081018#post58081018
I factory reset my Samsung Grand 2 then charged it. When I saw my phone it was updated in kitkat. I accidentally hit the install and reboot. But after that, it stuck in logo screen. I've tried to wipe data, cache and everything. So, I flash it with odin with correct latest firmware. But it keeps on failing and appears firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. Ive tried to fix it with Kies but there's no chance. I also brought it to service center but they said it keeps on failing and the program cant enter.
This is the ODIN log:
ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> root66_VZW_stock_system.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> system.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've been searching how to fix my phone.
PLEASE SOMEONE HELP ME.
xilaaa said:
I factory reset my Samsung Grand 2 then charged it. When I saw my phone it was updated in kitkat. I accidentally hit the install and reboot. But after that, it stuck in logo screen. I've tried to wipe data, cache and everything. So, I flash it with odin with correct latest firmware. But it keeps on failing and appears firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. Ive tried to fix it with Kies but there's no chance. I also brought it to service center but they said it keeps on failing and the program cant enter.
This is the ODIN log:
ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> root66_VZW_stock_system.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> system.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've been searching how to fix my phone.
PLEASE SOMEONE HELP ME.
Click to expand...
Click to collapse
See if you have the proper firmware and read the instructions here: http://forum.xda-developers.com/galaxy-grand-2/general/stock-firmware-grand-2-google-drive-t2849501
Or else you could ask help from anyone having a similar phone in this forum: http://forum.xda-developers.com/galaxy-grand-2
I tried the instruction but it didn't work still failed. I also tried to flash it with original stock but it says SW REV CHECK FAIL : [sbl1]Fused 1 > Binary 0
Im losing hope. Please help :crying: :crying:
xilaaa said:
I tried the instruction but it didn't work still failed. I also tried to flash it with original stock but it says SW REV CHECK FAIL : [sbl1]Fused 1 > Binary 0
Im losing hope. Please help :crying: :crying:
Click to expand...
Click to collapse
I don't know specifically about your phone.
Only asking someone here would help: http://forum.xda-developers.com/galaxy-grand-2/help
I tried to downgrade my phone but it shows SW REV CHECK FAIL : [aboot]Fused 2 > Binary 1
Just tried to flash my SM-G920X It's a demo version of the S6.
( No calling. I'm ok with this it's not my problem)
Because it had the retail mode software installed that is a nuisance. I tried to flash over it many times. The retail mode locks the bootloader and can't be removed, its an administrator. wiping with android device manager just returns to stock+retailmode. retailmode documentation now says it can never be removed.
recovery mode wipe is forbidden.
cfautoroot and twrp both fail - its the retailmode lock
I tried flashing with G920FXXU1AOE3_G920FXEU1AODQ_XEU.zip with the *Phone bootloader update* ticked. It's a full unbranded rom from sammobile. It should have a bootloader?
It replaced the bootloader!!!!
Then hung. reboot phone.
"An error has occurred while updating device software. Use Emergency recovery function in Smart Switch PC software."
I can't. it demands a code from the programs last try when the update failed. Or you can try to use the sim registration serial number online check. But I no have sim! It's not registered. (it is not stolen I've already had a back and forth with samsung email serial number check. I got it from ebay)
Cannot power off! stuck on either download mode or emergency warning. Both bright blue/green whole screen. left it plugged in last night so it didn't drain the battery flat. Was very very hot this morning. I put it in the freezer for half an hour.
Think I can still use odin. It says added. I can still get it into download mode.
Just need to totally reflash the thing. But with what???
when I try to reflash bootloader I get...
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920FXXU1AOE3_G920FXEU1AODQ_G920FXXU1AOE3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> cache.img
<ID:0/005> cm.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
when I try normal odin whole flash of the ....XEU It just hangs here...
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920FXXU1AOE3_G920FXEU1AODQ_G920FXXU1AOE3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
Holy ****! There is something very wrong with the way odin deals with these things.
I just copied out the recovery.img file from the stock rom I've been trying to flash. Copied it over the one in here twrp-2.8.6.0-zeroflte.img.tar as suggested by this post. http://forum.xda-developers.com/galaxy-s6/help/solved-stuck-download-mode-failed-odin-t3104736/page2
I have recovery back!
This is an odin **** up as he says.
reboot. exactly where I was retailmode still there account still there.
quatzar said:
Holy ****! There is something very wrong with the way odin deals with these things.
I just copied out the recovery.img file from the stock rom I've been trying to flash. Copied it over the one in here twrp-2.8.6.0-zeroflte.img.tar as suggested by this post. http://forum.xda-developers.com/galaxy-s6/help/solved-stuck-download-mode-failed-odin-t3104736/page2
I have recovery back!
This is an odin **** up as he says.
reboot. exactly where I was retailmode still there account still there.
Click to expand...
Click to collapse
me facing almost same situation, I want to remove demo crap from it, so I just root it as my first step but now phone is hang on Galaxy S6 live demo unit, I try to flash your recovery but I was not much lucky so please can you give some tips to solve issue, thanks
Hi,
I am new here, I've read the sticky so this seemed like the right place to post so here goes,
I have a Samsung Galaxy Note 3 (SM-N9005) which I have attempted (very unsuccessfully) to root, I followed some steps that others have done on various youtube videos using Odin3 and kingroot but unfortunately I believe my phone disconnected from the laptop while it was in download mode and now on each attempt I am left with the below message on recovery mode:
Firmware upgrade encountered an issue, Please select recovery mode in Kies and try again.
I tried Kies and have since found several articles stating that kies will never work if you have rooted or tried to root your phone.
When i try to download a new ROM or the original firmware ROM using the desktop Odin3 it fails every time now with the below transcript:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUGBPB1_N9005EVRGBPB1_N9005XXUGBOJ1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
I've read many posts around the web suggesting ways to fix it but everything involves being in recovery mode which i cannot do, does anybody have any idea what i should do? please let me know if you need any further info, hopefully I am just being stupid and it's a really simple answer!
siv4444 said:
Hi,
I am new here, I've read the sticky so this seemed like the right place to post so here goes,
I have a Samsung Galaxy Note 3 (SM-N9005) which I have attempted (very unsuccessfully) to root, I followed some steps that others have done on various youtube videos using Odin3 and kingroot but unfortunately I believe my phone disconnected from the laptop while it was in download mode and now on each attempt I am left with the below message on recovery mode:
Firmware upgrade encountered an issue, Please select recovery mode in Kies and try again.
I tried Kies and have since found several articles stating that kies will never work if you have rooted or tried to root your phone.
When i try to download a new ROM or the original firmware ROM using the desktop Odin3 it fails every time now with the below transcript:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUGBPB1_N9005EVRGBPB1_N9005XXUGBOJ1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
I've read many posts around the web suggesting ways to fix it but everything involves being in recovery mode which i cannot do, does anybody have any idea what i should do? please let me know if you need any further info, hopefully I am just being stupid and it's a really simple answer!
Click to expand...
Click to collapse
Greetings and welcome to assist. There are a few things it could be, you could try a different version of odin, it could be an older version of firmware you are flashing or a file has become corrupt. If you connect your phone to kies and select emergency firmware recovery then that will return your phone to stock
Good Luck
Sawdoctor