Hi,
I would like to update the my Sony Ericsson W8. Can some one help me how to update and what are the necessary software do i need to download??I am completely new for this process.
Model Number :E16i(Sony Ericsson W8)
Firmware version:2.1-update 1
kernal version :2.6.29 [email protected] # 1
I have another doubt. if we were failed in the process of update, shall we get back our old Android 2.1. Please help me.???????
Regards,
Prasad.tyson
i thnk u cant update dat w8....its hardwre supprts upto or only 2.1.....i too searched evrywhr n dsappointd..........actuali i think so.....hopng 4 ny hackng tips....
It's possible I see a few rom on the x8 developers section, look there!
Be Happy...........!
prasad.tyson said:
Hi,
I would like to update the my Sony Ericsson W8. Can some one help me how to update and what are the necessary software do i need to download??I am completely new for this process.
Model Number :E16i(Sony Ericsson W8)
Firmware version:2.1-update 1
kernal version :2.6.29 [email protected] # 1
I have another doubt. if we were failed in the process of update, shall we get back our old Android 2.1. Please help me.???????
Regards,
Prasad.tyson
Click to expand...
Click to collapse
You can get it.... Quickly & simply......!
Checkout on YOUTUBE for complete process...
OR
Do The Following...................!!
Download These File First :
*Super One Click
*Xrecovery
*Root Explorer
*GingerDX v21 ROM (From Xda or Elswhere)
Just Follow This Step
Step 1: Root your W8
- download and unzip SuperOneClickv1.9.1-ShortFuse to PC Desktop
- connect W8 to PC (Do not mount)
- on your phone [goto] [setting] [applications] select [unknown sources]
- on your phone [goto] [setting] [applications] [development] select [usb debugging]
- Launch SuperOneClick, click [Root]
- If it ask something about Busy Box just click Yes
- you will see - [not successful - is your phone software higher than 2.0?]
- click [yes] and then [success] & [test su] message
(this last part might not appear the same as It's written here, so just use your common sense to get through)
If you are successful in ROOTING your phone - SuperUser app will be installed to your W8.
If you are not successful:-
(a) check your PC [devices] [usb] to see if your phone is recognized by your PC (troubleshoot PC driver problem)
(b) [usb debugging] in your W8 phone settings enabled?
Then [Launch] [SuperOneClick] and try again.
Install any File Manager from Android Market, such as Astro File Manager.
Step 2: Mount W8 (to access SD Card)
- copy [Root.Explorer.v2.16.apk] to root of SD Card
- using PC create folder [xRecovery] and unzip xRecovery0.1.rar
- put the 3 files into the xRecovery folder you've created
- copy the xRecovery folder to root of SD Card
Step 3: UnMount W8 from PC
Step 4: Launch [Astro File Manager] Install [Root Explorer v2.16.apk]
Step 5:
- Launch [Root Explorer]
- scroll down to /sdcard [click to access]
- scroll down to xRecovery folder [click to access]
- Select each of the 3 files (one by one) [click & hold] [copy]
- [click] parent folder (twice)
- scroll down to [click to access] [system]
- [click to access] [bin] and [click] [Mount R/W] (R/W as in Read/Write)
- press [paste] button
Now your Phone should be rooted and ready to install your Android 2.3.7
Step 1: Make a backup copy of your Android Eclair 2.1 using xRecovery
- check that your phone's SD Card has at least 650MB of free space
[SD card free space is to hold both your phone original backup ROM and the 2.3 ROM]
- shutdown your W8 and wait 5 seconds and then [reboot] your phone.
- when you see the words [Sony Ericsson] on the phone screen, start pressing the back button on your phone multiple times and you will enter the xRecovery Menu.
- select [backup and restore] [backup] from the menu
NOTE:
- This will create a backup file in your SD Card [SD/xRecovery/backup]
- After you have completed the backup using xRecovery, it will return to the menu screen.
- Now choose [reboot] - your W8 phone should restart
Step 2: Download GingerXperia ROM (something you probably already did with the links above)
- [mount] your W8 and copy this file [GingerDX.zip] into SD card
- [unmount] and shutdown your W8
Step 3: Installing the 2.3.7 ROM on your W8
- [boot] W8
- when you see the words [Sony Ericsson] on the phone screen, start pressing the back button on your phone multiple times and you will enter the xRecovery Menu.
- [select] [factory reset (full wipe)]
- scroll down and hit [install custom zip]
- select [GingerDX.zip] from your SD card & hit [yes]
- xRecovery will start to install the 2.3.7 ROM on your phone.
- when it is done, xRecovey will go back to the startup menu
- [click] [reboot]
If you are stuck in the GingerDX startup screen for more than 5 minutes, just try restart the phone and It should be fine. Took me 2 restarts before the new ROM took action.
RESTORING THE Official Android Eclair 2.1.1 ROM
- [shutdown] wait 5 seconds [reboot] W8
- when you see the words [Sony Ericsson] on the phone screen, start pressing the back button on your phone multiple times and you will enter the xRecovery Menu.
- [select] [factory reset (full wipe)]
- scroll down and hit [backup/restore] [restore]
- you should see your original 2.1 backup ROM
- [select] [2011-10-xx.xx.xx.xx.ROM] [restore] [it should look something like 2011-05-06.21.01.23]
- xRecovery will start to install the original 2.1.1 ROM [the ROM you've backed up in Step 1] from your phone's SD Card.
- when it is done xRecovey will go back to the startup menu
- [click] [reboot]
May Your Problem Get Solved.................!
Please Press Thanks If I helped u..............
update SE w8 from 2.1.1 to gdx 2.3.7 v21 b
Hi All,
thanks for self explanatory work instruction on how to upgarde SE w8 from 2.1.1 to gdx 2.3.7 v21 b.
however i hv found after successful installation of gdx 2.3.7 v21 b.
wifi is not working.
when ticking wifi tab...it is hang on scanning phase.
i m unable to view & add my wifi networks.
can some1 help here.
thanks
Wifi Prob.....??
bosky_itsme said:
Hi All,
thanks for self explanatory work instruction on how to upgarde SE w8 from 2.1.1 to gdx 2.3.7 v21 b.
however i hv found after successful installation of gdx 2.3.7 v21 b.
wifi is not working.
when ticking wifi tab...it is hang on scanning phase.
i m unable to view & add my wifi networks.
can some1 help here.
thanks
Click to expand...
Click to collapse
Install Kuyadroid or PrimeHD, or Just Latest Version of GingerDX V029....... All r Great..........!!!
I myself used them...........
And Please Press Thanks If I helped u.............. :highfive:
Can't get into recovery mode
Hello, I use a W8 E16i myself. I've rooted properly and I've copied Xrecovery files to the bin folder. Still I can't get into recovery mode. I keep pressing the back button after rebooting my phone, still it boots normally and doesn't go into recovery. help would be appreciated
Thanks
NO man, try rooting again, if u fail go to stock rom root again it will work, ! Read the manual twice before u proceed
Just Chill....
666shanx said:
Hello, I use a W8 E16i myself. I've rooted properly and I've copied Xrecovery files to the bin folder. Still I can't get into recovery mode. I keep pressing the back button after rebooting my phone, still it boots normally and doesn't go into recovery. help would be appreciated
Thanks
Click to expand...
Click to collapse
First Read Completely........!!!!!!
Man i think u should go for new...........
I mean install Sony update service............
Install the custom ROM using this & root your device properly....
Use Flash tool or x8toolbox(i prefer this ) for rooting & installing recovery.......
(Or Try To install just xrecovery once..... May it Work)
else :silly:
Just check the directory properly were u have pasted xrecovery files...(Remember There Are Two Bin Folders)
Replace Them.....(But It Can Hang Ur Phone & U May Have To Follow Upper Steps).
Click THANKS If I HELPED.....!!!!!
Hey Thanks a lot Raj Rohit. I took your advice and used x8toolbox. Everything working now. Thanks a lot dude. I've clicked your thanks button
Hey I did install the GingerDx rom but now i can't seem to access data settings. even if i click Data Enabled, I don't seem to access the net. Please help. I could access data when i installed Gingerxperia but i get a lot of crashed when playing 3D games so decided to switch to GingerDx. But now i cant access net. Please help
Edit: Never mind. Found the answer on another website. Thanks anyways
It's Common
666shanx said:
Hey I did install the GingerDx rom but now i can't seem to access data settings. even if i click Data Enabled, I don't seem to access the net. Please help. I could access data when i installed Gingerxperia but i get a lot of crashed when playing 3D games so decided to switch to GingerDx. But now i cant access net. Please help
Edit: Never mind. Found the answer on another website. Thanks anyways
Click to expand...
Click to collapse
Man Check For Latest Rom.
Old Roms Have Bugs.
If U r not sure what to use go for kuyadroid.
I have used it.....!!!!
Its Smooth & great.
Other wise fill the kernal & other requirements properly for GDX.
After u solve this i will tell u a trick to run all games for X8/W8... so keep smiling !!:laugh:
i tried kuyadroid 2.3.175, Ginger Dx, GingerXperia v21, FroyoPro and I'm currently using honeyfroyo. 3d games seem to crash in ALL of them. Dead Space crashed on reloading saved games on all custom roms and has no problem running on Stock 2.1 ROM.
It's Secret........!!
666shanx said:
i tried kuyadroid 2.3.175, Ginger Dx, GingerXperia v21, FroyoPro and I'm currently using honeyfroyo. 3d games seem to crash in ALL of them. Dead Space crashed on reloading saved games on all custom roms and has no problem running on Stock 2.1 ROM.
Click to expand...
Click to collapse
Ya it's true...
I worked a bit hard to solve it.....
I won't Think u will get such solution anywhere.....
What u have to do is to copy this file( http://www.mediafire.com/?jzeu7yki6wliusa ) to Bin (it will ask to replace).
(Use Rootexplorer.... Goto: system>>bin[paste])
Enjoy After reboot....!!!!
Work on all Ginger Bread Rom
Hit Thanks If Ur Games Worked......!!!!!!!
i am using Sony Ericsson W8
was tryin to install Gingr DX i have completed the root.....but i am not getting the xrcovery menu wen m startin the phn...m fed up of pressing the back button but still facing the same problem....
i can not restore my 2.1 eclare
Raj Rohit said:
You can get it.... Quickly & simply......!
Checkout on YOUTUBE for complete process...
OR
Do The Following...................!!
Download These File First :
*Super One Click
*Xrecovery
*Root Explorer
*GingerDX v21 ROM (From Xda or Elswhere)
Just Follow This Step
Step 1: Root your W8
- download and unzip SuperOneClickv1.9.1-ShortFuse to PC Desktop
- connect W8 to PC (Do not mount)
- on your phone [goto] [setting] [applications] select [unknown sources]
- on your phone [goto] [setting] [applications] [development] select [usb debugging]
- Launch SuperOneClick, click [Root]
- If it ask something about Busy Box just click Yes
- you will see - [not successful - is your phone software higher than 2.0?]
- click [yes] and then [success] & [test su] message
(this last part might not appear the same as It's written here, so just use your common sense to get through)
If you are successful in ROOTING your phone - SuperUser app will be installed to your W8.
If you are not successful:-
(a) check your PC [devices] [usb] to see if your phone is recognized by your PC (troubleshoot PC driver problem)
(b) [usb debugging] in your W8 phone settings enabled?
Then [Launch] [SuperOneClick] and try again.
Install any File Manager from Android Market, such as Astro File Manager.
Step 2: Mount W8 (to access SD Card)
- copy [Root.Explorer.v2.16.apk] to root of SD Card
- using PC create folder [xRecovery] and unzip xRecovery0.1.rar
- put the 3 files into the xRecovery folder you've created
- copy the xRecovery folder to root of SD Card
Step 3: UnMount W8 from PC
Step 4: Launch [Astro File Manager] Install [Root Explorer v2.16.apk]
Step 5:
- Launch [Root Explorer]
- scroll down to /sdcard [click to access]
- scroll down to xRecovery folder [click to access]
- Select each of the 3 files (one by one) [click & hold] [copy]
- [click] parent folder (twice)
- scroll down to [click to access] [system]
- [click to access] [bin] and [click] [Mount R/W] (R/W as in Read/Write)
- press [paste] button
Now your Phone should be rooted and ready to install your Android 2.3.7
Step 1: Make a backup copy of your Android Eclair 2.1 using xRecovery
- check that your phone's SD Card has at least 650MB of free space
[SD card free space is to hold both your phone original backup ROM and the 2.3 ROM]
- shutdown your W8 and wait 5 seconds and then [reboot] your phone.
- when you see the words [Sony Ericsson] on the phone screen, start pressing the back button on your phone multiple times and you will enter the xRecovery Menu.
- select [backup and restore] [backup] from the menu
NOTE:
- This will create a backup file in your SD Card [SD/xRecovery/backup]
- After you have completed the backup using xRecovery, it will return to the menu screen.
- Now choose [reboot] - your W8 phone should restart
Step 2: Download GingerXperia ROM (something you probably already did with the links above)
- [mount] your W8 and copy this file [GingerDX.zip] into SD card
- [unmount] and shutdown your W8
Step 3: Installing the 2.3.7 ROM on your W8
- [boot] W8
- when you see the words [Sony Ericsson] on the phone screen, start pressing the back button on your phone multiple times and you will enter the xRecovery Menu.
- [select] [factory reset (full wipe)]
- scroll down and hit [install custom zip]
- select [GingerDX.zip] from your SD card & hit [yes]
- xRecovery will start to install the 2.3.7 ROM on your phone.
- when it is done, xRecovey will go back to the startup menu
- [click] [reboot]
If you are stuck in the GingerDX startup screen for more than 5 minutes, just try restart the phone and It should be fine. Took me 2 restarts before the new ROM took action.
RESTORING THE Official Android Eclair 2.1.1 ROM
- [shutdown] wait 5 seconds [reboot] W8
- when you see the words [Sony Ericsson] on the phone screen, start pressing the back button on your phone multiple times and you will enter the xRecovery Menu.
- [select] [factory reset (full wipe)]
- scroll down and hit [backup/restore] [restore]
- you should see your original 2.1 backup ROM
- [select] [2011-10-xx.xx.xx.xx.ROM] [restore] [it should look something like 2011-05-06.21.01.23]
- xRecovery will start to install the original 2.1.1 ROM [the ROM you've backed up in Step 1] from your phone's SD Card.
- when it is done xRecovey will go back to the startup menu
- [click] [reboot]
May Your Problem Get Solved.................!
Please Press Thanks If I helped u..............
Click to expand...
Click to collapse
sir.. help me... i cannot restore my 2.1 eclare..i made a back up before i install custom zip but when i try to restore it it says no file in there but when i look into my root explorer there are 4 files in there: cache.img, data.img, nandroid.md5, system.img. help pls as soon as possible thankyu
not starting phone w8 after update
i m using sony e16i w8...
i m update my phone elit2.1 to gindexDX successfully but the problem is that my phone is not started after rebooting
it stuck in appear starting the gingerDX screen..
i remove battery also and start phone again but nothing happen..
and also not going back into recovery mode after pressing back button
what should i do can u help me plz to solve this problem..
plz rply me fast m waiting for your guidance.
root your xperia tipo without downgrading
Many peoples claimed root for last Xperia Tipo update (both International 11.0.A.4.22 and Vodafone 11.0.A.4.25)because of the boost of performances of the phone. With this 2 updates the antutu benchmark app shows an increased value of score.DISCLAIMER: if your phone becomes a brick I'm not responsible of the damage.
1. Unlock your bootloader from xperia developers site (search on google)
2. Download freeXperiaProject CM10
3. Do a backup of your firmware from Sony Ericsson Update Service, copying the entire folder of Sony Ericsson update service to another folder.
Download flashtool from the link at the bottom of the post
Convert you files using Decrypt files function from the Tools menu of flashtool, selecting the folder where you saved files from Sony Ericsson Update Service
Select the 3 files having the beginning of the name FILE_
Add all the list of files to move them on the right
It will create a ftf file to flash from flashtool
Put it into the folder firmwares of flashtool
open it with win rar and save kernel.sin
From now follows these steps carefully.
Put the kernel.sin and the boot.img into you fastboot's root folder (example android-sdk-windows/platform-tools)
Shut down your xperia tipo
Press volume up key and keep it pressed when connecting your USB cable
Go on fastboot and type "fastboot flash boot boot.img
Type fastboot reboot
When the led becomes pink press the volume up key a lot of times
You should be into cwm recovery
Download the SuperSu flashable zip for universal root (link at the bottom of the post)
put it into your sdcard by mounting it (recovery will mnount external sd via usb)
unmount your usb and mount system, then go to install zip from sdcard -> apply zip from external storge (or sdcard)
apply the SuperSu zip
Detach you usb cable and remove the battery for about 30 seconds
reinsert battery and do not power on yyour device; press the fastboot volume up button and connect the usb cable
go back to fastboot and type fastboot flash boot kernel.sin
You are done, reboot your tipo and enjoy it rooted!
Links: remove and replace x with t
Xperia unlocking instructions: hxxp://unlockbootloader.sonymobile.com
CM10: hxxp://uploaded.net/file/yddia8fu/from/rnta1u
Flashtool: hxxp://androxyde.github.com/
Firmware (if you don't want to do backup from Sony Ericsson Update Service): hxxp://forum.xda-developers.com/showthread.php?t=2001567
SuperSu: hxxp://forum.xda-developers.com/showthread.php?t=1538053
It worked fine on my device!
pls help..!!!!!
i wanted to add the xperia z home screen panels in my xperia miro as posted somehere in this site.it was a simple procedure but me being impatient n a total noob messed it up.i downloaded the home.apk of xperia z and copied it into the directory /system/apps and replaced it with the stock home.apk and forgot to make a backup of the replaced file n even forgot to change permissions to rw-r-r of the new home.apk.now my phone wont boot n it gets stuck in the 'xperia logo'.is my phone bricked?????is there any solution???help pls
rusted_lkr said:
pls help..!!!!!
i wanted to add the xperia z home screen panels in my xperia miro as posted somehere in this site.it was a simple procedure but me being impatient n a total noob messed it up.i downloaded the home.apk of xperia z and copied it into the directory /system/apps and replaced it with the stock home.apk and forgot to make a backup of the replaced file n even forgot to change permissions to rw-r-r of the new home.apk.now my phone wont boot n it gets stuck in the 'xperia logo'.is my phone bricked?????is there any solution???help pls
Click to expand...
Click to collapse
Your best bet would be to flash the stock firmware onto your device using flashtool.
1) Download flashtool from here: http://androxyde.github.io/
2) Download Miro firmware 11.0.A.5.5 from here: https://docs.google.com/file/d/0B_d8uWGbkaetR1ZuSWlUcTNNQVk/edit?pli=1
3) Install flashtool to your computer, keep the install location default to keep things simple.
4) Move the firmware to the flashtool directory. Default path is C:\Flashtool\firmwares
5) Install the device drivers provided with flashtool. Default path is C:\Flashtool\drivers. Install every driver firmware possible.
6) Open flashtool and click the lightning bolt. Select flash mode.
7) In the new window select your Miro firmware what you moved to the firmwares folder. Do NOT change any of the tick boxes as doing so can cause complications. Press okay.
8) Let flashtool prepare the file for flashing. Once it has it will ask you to connect your device in flash mode. To do so plug the large USB end into your computer, remove your phones battery and leave the back off. Connect the small end of the USB cable to your phone and hold the volume DOWN (-) button. Insert the battery. This puts your phone into flash mode.
9) Let flashtool work its magic. It takes about 2-5 minutes to make your phone work again.
10) Enjoy your working phone.
gamer649 said:
Your best bet would be to flash the stock firmware onto your device using flashtool.
1) Download flashtool from here: http://androxyde.github.io/
2) Download Miro firmware 11.0.A.5.5 from here: https://docs.google.com/file/d/0B_d8uWGbkaetR1ZuSWlUcTNNQVk/edit?pli=1
3) Install flashtool to your computer, keep the install location default to keep things simple.
4) Move the firmware to the flashtool directory. Default path is C:\Flashtool\firmwares
5) Install the device drivers provided with flashtool. Default path is C:\Flashtool\drivers. Install every driver firmware possible.
6) Open flashtool and click the lightning bolt. Select flash mode.
7) In the new window select your Miro firmware what you moved to the firmwares folder. Do NOT change any of the tick boxes as doing so can cause complications. Press okay.
8) Let flashtool prepare the file for flashing. Once it has it will ask you to connect your device in flash mode. To do so plug the large USB end into your computer, remove your phones battery and leave the back off. Connect the small end of the USB cable to your phone and hold the volume DOWN (-) button. Insert the battery. This puts your phone into flash mode.
9) Let flashtool work its magic. It takes about 2-5 minutes to make your phone work again.
10) Enjoy your working phone.
Click to expand...
Click to collapse
=====================================
thanks a lot....it worked like a charm
gamer649 said:
Your best bet would be to flash the stock firmware onto your device using flashtool.
1) Download flashtool from here: [
2) Download Miro firmware 11.0.A.5.5 from here:
3) Install flashtool to your computer, keep the install location default to keep things simple.
4) Move the firmware to the flashtool directory. Default path is C:\Flashtool\firmwares
5) Install the device drivers provided with flashtool. Default path is C:\Flashtool\drivers. Install every driver firmware possible.
6) Open flashtool and click the lightning bolt. Select flash mode.
7) In the new window select your Miro firmware what you moved to the firmwares folder. Do NOT change any of the tick boxes as doing so can cause complications. Press okay.
8) Let flashtool prepare the file for flashing. Once it has it will ask you to connect your device in flash mode. To do so plug the large USB end into your computer, remove your phones battery and leave the back off. Connect the small end of the USB cable to your phone and hold the volume DOWN (-) button. Insert the battery. This puts your phone into flash mode.
9) Let flashtool work its magic. It takes about 2-5 minutes to make your phone work again.
10) Enjoy your working phone.
Click to expand...
Click to collapse
Hi the same happened to my phone, but when i try to do that the green led turns up but I get this in the flashtool
16/000/2013 09:00:24 - INFO - <- This level is successfully initialized
16/000/2013 09:00:24 - INFO - Flashtool Version 0.9.12.1 built on 2013-06-04 22:50:00
16/000/2013 09:00:26 - INFO - Device disconnected
16/000/2013 09:00:40 - INFO - Selected ST23i / 11.0.A.5.5 / CE
16/000/2013 09:00:40 - INFO - Preparing files for flashing
16/000/2013 09:00:56 - INFO - Please connect your device into flashmode.
16/001/2013 09:01:16 - INFO - Opening device for R/W
16/001/2013 09:01:16 - INFO - Start Flashing
16/001/2013 09:01:16 - INFO - Processing loader.sin
16/001/2013 09:01:16 - INFO - Checking header
16/001/2013 09:01:16 - INFO - Ending flash session
16/001/2013 09:01:16 - ERROR -
16/001/2013 09:01:16 - ERROR - Error flashing. Aborted
16/001/2013 09:01:16 - INFO - Device connected in flash mode
If have CWM installed you can run advanced - fix permissions if your phone's permissions are wrong.
Anyway with your current problem try:
> don't enter flashmode until flashtool asks to to do so.
> redownload stock firmware
> run flashtool as administrator/root
thank u man
gamer649 said:
Your best bet would be to flash the stock firmware onto your device using flashtool.
1) Download flashtool from here: http://androxyde.github.io/
2) Download Miro firmware 11.0.A.5.5 from here: https://docs.google.com/file/d/0B_d8uWGbkaetR1ZuSWlUcTNNQVk/edit?pli=1
3) Install flashtool to your computer, keep the install location default to keep things simple.
4) Move the firmware to the flashtool directory. Default path is C:\Flashtool\firmwares
5) Install the device drivers provided with flashtool. Default path is C:\Flashtool\drivers. Install every driver firmware possible.
6) Open flashtool and click the lightning bolt. Select flash mode.
7) In the new window select your Miro firmware what you moved to the firmwares folder. Do NOT change any of the tick boxes as doing so can cause complications. Press okay.
8) Let flashtool prepare the file for flashing. Once it has it will ask you to connect your device in flash mode. To do so plug the large USB end into your computer, remove your phones battery and leave the back off. Connect the small end of the USB cable to your phone and hold the volume DOWN (-) button. Insert the battery. This puts your phone into flash mode.
9) Let flashtool work its magic. It takes about 2-5 minutes to make your phone work again.
10) Enjoy your working phone.
Click to expand...
Click to collapse
thank you very much man. u really helped me.. thx u very much. hats off
Doesn't detect
Hi, if i follow the steps to get in flash mode, flashtool keeps saying that i must connect him. What now?
Flashplay said:
Hi, if i follow the steps to get in flash mode, flashtool keeps saying that i must connect him. What now?
Click to expand...
Click to collapse
What OS do you use? that hapen to me on Win 8.1, try on 7 it wil work.
xperia miro stuck on cyanogen boot logo while flashinf stock ftf
I m facing the same problem,
xperia miro stuck on cyanogen boot logo while flashing stock ftf with flashtool. Now cyanogen boot logo is revovling but nothing else.
Flashttol say device is coonected in usb debugging off, but i checked usb debugging was ticked in setting. now not able to boot phone. Need your help guys ASAP.
Using Windows 7
Hey,
To recover from your brick:
http://forum.xda-developers.com/showthread.php?t=2631456
Have a nice day!
Sent from a bad phone
It shows You didnt have fastboot drivers
---------- Post added at 04:55 PM ---------- Previous post was at 04:51 PM ----------
Pleass provide Updated links for download , My miro stucks at Xperia logo still no recovery ,
gopinaidu said:
It shows You didnt have fastboot drivers
---------- Post added at 04:55 PM ---------- Previous post was at 04:51 PM ----------
Pleass provide Updated links for download , My miro stucks at Xperia logo still no recovery ,
Click to expand...
Click to collapse
For Flashing Stock ROM fastboot drivers are not required, only flashmode drivers are required which Windows manages to get them easily. I wanted fastboot drivers for my phone which were in Flashtool -> Drivers folder. But the installing always used to fail. After lot of google searches I found out as the drivers were not digitally signed Windows used to block it's install process. If you are having same problem just Google 'How to disable driver signature enforcement in Windows'. It helped for me
A new Rom for A89
Experience Best Performance with this Rom
Features
Rooted
Deodexed
Jellybean System UI
Stock Lockscreen
Many Tweaks Added
S3 Dailer
Best for Hardcore Gamers
NOTE:I am not responsible for any damage caused to you phone
NOTE;Make a backup before installing it
INSTRUCTIONS:
1) Enable USB debugging (Setting > Application > Development > USB debugging)
2) Download only the ROM from above link (1) & copy it to external sdcard.
3) Download the ROM addons from above link > extract it on your desktop > copy the sound tweaks.zip file from extracted folder to external sdcard.
4) Now boot into clockworkmod recovery by pressing volume up + power down at same time.
5) There in recovery mode you will get an option > Install Zip from sdcard, select it.
6) Now browse to external sdcard & choose the S3 CUSTOM ROM FOR MICROMAX A89 which you copied earlier to sdcard.
7) Wait for the zip installation to finished.
8)Reboot
Screenshots in attachments:good:
Ankurthe master said:
A new Rom for A89
Experience Best Performance with this Rom
Click to expand...
Click to collapse
Where is the link buddy?
Ankurthe master said:
A new Rom for A89
Experience Best Performance with this Rom
Features
Rooted
Deodexed
Jellybean System UI
Stock Lockscreen
Many Tweaks Added
S3 Dailer
Best for Hardcore Gamers
NOTE:I am not responsible for any damage caused to you phone
NOTE;Make a backup before installing it
INSTRUCTIONS:
1) Enable USB debugging (Setting > Application > Development > USB debugging)
2) Download only the ROM from above link (1) & copy it to external sdcard.
3) Download the ROM addons from above link > extract it on your desktop > copy the sound tweaks.zip file from extracted folder to external sdcard.
4) Now boot into clockworkmod recovery by pressing volume up + power down at same time.
5) There in recovery mode you will get an option > Install Zip from sdcard, select it.
6) Now browse to external sdcard & choose the S3 CUSTOM ROM FOR MICROMAX A89 which you copied earlier to sdcard.
7) Wait for the zip installation to finished.
8)Reboot
Screenshots in attachments:good:
Click to expand...
Click to collapse
Where's the link??? Buddy?? :what::what:
Sent from my Micromax A89 using XDA Premium 4 mobile app
http://d-h.st/8y7 Link
Good work...:good:
hey
Ankurthe master said:
A new Rom for A89
Experience Best Performance with this Rom
Features
Rooted
Deodexed
Jellybean System UI
Stock Lockscreen
Many Tweaks Added
S3 Dailer
Best for Hardcore Gamers
NOTE:I am not responsible for any damage caused to you phone
NOTE;Make a backup before installing it
INSTRUCTIONS:
1) Enable USB debugging (Setting > Application > Development > USB debugging)
2) Download only the ROM from above link (1) & copy it to external sdcard.
3) Download the ROM addons from above link > extract it on your desktop > copy the sound tweaks.zip file from extracted folder to external sdcard.
4) Now boot into clockworkmod recovery by pressing volume up + power down at same time.
5) There in recovery mode you will get an option > Install Zip from sdcard, select it.
6) Now browse to external sdcard & choose the S3 CUSTOM ROM FOR MICROMAX A89 which you copied earlier to sdcard.
7) Wait for the zip installation to finished.
8)Reboot
Screenshots in attachments:good:
Click to expand...
Click to collapse
Mention Credit. It had already released. It,s not yours. Think before you post.
Guys,
This is my First Post.
Sony Xperia C (C2305) Rooting!!!!
--->Tested and Working Properly.....
Requirements:
1.Sony Xperia C (C2305) smartphone with minimum 80% battery level
2.A Windows PC
3.A Micro USB Cable
4.Xperia C device driver
5.Rooting Package
Follow these Steps Carefully:good::good::good::good::good::good:
1.First download the rooting package from below attachment to your computer.
2.Once you downloaded the package, just unzip the package and save them in your desktop.
3.After that enable the USB debugging option in your phone by navigating to the path Settings > Developer Options. In case, you could not see the developer option in your phone just go to “About Phone” and tap it 7 times on build number, there you can find that option.
4.After that connect your Sony Xperia C (C2305) to the computer by using USB cable.
5.Once your computer recognize your device just run the Sony Xperia C Root.exe that you have extracted earlier and save the same in your desktop.
6.Allow the rooting package to root your smartphone.
All the credits goes to its developer
Enjoy Sony Xperia C users
Now Rooting is done U can see the Kinguser app in your phone:good::good::good::good:
Install Custom Recovery for all Xperia C devices
1) Download recovery.img from below
2) Put recovery.img to your phone's memory(not into folder)
3) Download [ROOT] Rashr - Flash Tool
from play store and open, click Recovery Update from storage and choose your file.
It is done .
Now you can flash any custom rom using this recovery!!!!!
Feel free to comment if u guys stuck anywhere!!!
Enjoy!!!
Thanks
We know it already
Sent from my C2305 using Tapatalk