[Q] [Echoe Rom v1] Missing LTE/4G connection - Galaxy Note 10.1 Q&A, Help & Troubleshooting

I flashed this rom (v1 - 4.4 KitKat) to my N8020 and now I am missing the 4G/LTE connection
Yes I did a full wipe before i flash the rom via CWM, i setup the correct APN for Telstra (telstra.internet) and yet all I get is 3G/H connection
I noticed during the flash that it flashed a modem, i would assume that modem wasn't meant for the N8020's for aussie.
Is there a way that I can get back my faster speed (4G/LTE)?
Other then that great ROM!
Cheers @Fauert @störte @skeamznz

Related

[Q] Why does my 3G not work after flashing custom rom?

I've tried several different custom roms... All of them cause me to not be able to recieve a 3G connection as if the sim slot isn't there...
I can successfully flash with fastboot/adb the telstra stock of 3.0.1 to my xoom and use 3g fine... I can root it fine also... What is annoying is that if i try running a custom rom i lose my 3g...
I'm about to re-flash to stock... re-root and try flashing a custom kernel to stock rooted rom... need a bit of help here if i am to get a custom rom working correctly...
My xoom is a 3g + wifi mz601 from optus here in queensland australia...

[Q] no data connection

hey guys,
i just installed the bionix reloaded rom and now i have no data connection. i have at&t and i got this phone hoping the tmo merger would go through but it hasn't. so i was dealing with horrible 2g connection with the stock tmo rom. i then flashed the new rom and now i have no data connection...
is there a rom that is friendly to at&t? or did i install it incorrectly?
Change it to AT&T APN.
http://developer.att.com/developer/forward.jsp?passedItemId=1700008
i did change it when i flashed, and no data connection but ironically txt and calls came through perfectly...
however, i flashed it again to an miui rom which didn't work out so well (reboot loop), then i flashed it to weapon and after like half an hour, finally got my data connection
later on, i reflashed my first rom and got a data connection immediately after i added at&t's apn
bad flash maybe?
anyway, thanks for the help

[Q] No data connection with any Jellybean ROMs

Hi,
I recently decided to flash a jeallybean ROM since most of them are getting really great and we don't have any word on the official update. Unfortunatly, I'm now unable to get a data connection on my HOX. It's the rogers version which I unlocked and I'm now using on the Bell network. Before flashing, LTE worked fine with the stock sense ROM, but now I don't have any data at all.
ROMs I've tried :
AOKP, MIUI and CM10.
I've tried to : set the data connection to GSM only, nothing, to LTE only, nothing, to WCDMA only, nothing. I've tried all the APNs I've found (pda.bell.ca, pda2.bell.ca, inet.bell.ca). On AOKP it sometimes said "Error while searching for network". WiFi, texts and calls work fine.
If anyone could help me, it would be really appreaciated. Otherwise I'll just revert to Rogers ROM. Thanks alot!
I cant offer any help, but I'm having a similar issue recently. I was on a nightly build of CM10 (from 10/06/12 I believe). I upgraded to a newer build (from 10/10) and I get no data over cell. I flashed it back and things were fine.
Dravyy said:
Hi,
I recently decided to flash a jeallybean ROM since most of them are getting really great and we don't have any word on the official update. Unfortunatly, I'm now unable to get a data connection on my HOX. It's the rogers version which I unlocked and I'm now using on the Bell network. Before flashing, LTE worked fine with the stock sense ROM, but now I don't have any data at all.
ROMs I've tried :
AOKP, MIUI and CM10.
I've tried to : set the data connection to GSM only, nothing, to LTE only, nothing, to WCDMA only, nothing. I've tried all the APNs I've found (pda.bell.ca, pda2.bell.ca, inet.bell.ca). On AOKP it sometimes said "Error while searching for network". WiFi, texts and calls work fine.
If anyone could help me, it would be really appreaciated. Otherwise I'll just revert to Rogers ROM. Thanks alot!
Click to expand...
Click to collapse
Before flashing jelly bean roms you need to flash a sense rom then do full wipe and install cm10 or aokp..
jspidey said:
I cant offer any help, but I'm having a similar issue recently. I was on a nightly build of CM10 (from 10/06/12 I believe). I upgraded to a newer build (from 10/10) and I get no data over cell. I flashed it back and things were fine.
Click to expand...
Click to collapse
Sent from my HTC One X using xda premium
I have the exact same problem with my SGS using the X-bean 3.0 rom.
What's the best solution? Is it because I used to Cwm?
Svenomous said:
I have the exact same problem with my SGS using the X-bean 3.0 rom.
What's the best solution? Is it because I used to Cwm?
Click to expand...
Click to collapse
Every device has its own nuances, as do various ROMs. So I'd advise posting this in the forum specific to your device.
Still no data connection.
I am having the same issue with my AT&T One X phone.
The phone was running 2.20 before it was unlocked/rooted. Installed TWRP, was a noob and forgot to save a backup, fastbooted the boot.img, flashed AOKP and CM10 successfully. With both of these ROMs, I could not get internet to work via cellular connection. I have tried everything with the APNs (even had AT&T help me setup APN settings) and still no mobile data connection. I can still receive/send SMS/calls, use bluetooth and wifi, just no mobile internet.
I'm not entirely sure what to do next. I attempted to go back and flash the UrDroid 4.1 Stock Sense ROM, but after fastbooting it's boot.img and attempting to flash with TWRP, I got a signature verification failure. Got scared and restored back to AOKP (I remember to make a backup this time.)
Thoughts? Sorry for being a noob.
Are you in an LTE area?
redpoint73 said:
Are you in an LTE area?
Click to expand...
Click to collapse
I am in a "4G" area (HSPA+) but I am also a hour drive away from LTE. I have tried APNs for both, but AT&T recommended I stick to the LTE APN. AT&T had me go to Settings->More->Mobile Networks->Network Operators and the phone just sat there searching without finding anything. I just did that above operation again and it found AT&T and I selected it. It spins on "Registering on AT&T..." for a few minutes and eventually errors out "Cannot register on this network at this time."
Have you tried switching off LTE by selecting "GSM/WCDMA Auto" in Settings?
I've had data problems on certain ROMs, where turning off LTE got the HSPA+ connection working.
In that case, it was probably a base of build.prop not playing well with AT&T's network. Although I would think the ROMs you mentioned would have these issues worked out at this point (and for some time now).
redpoint73 said:
Have you tried switching off LTE by selecting "GSM/WCDMA Auto" in Settings?
Click to expand...
Click to collapse
When I switch to "GSM/WCDMA Auto", it immediately switches itself back to the LTE setting. This is concerning.

[Q] [q] failed to connect to lte

hey guys, I am having an issue with lte, I live in an lte zone, I have reflashed, restore and flashed a few radios but I am not getting lte.
current rom/ cm10 nighlies
what happens is i turn on lte and it gets a blank signal bar and defaults back to h+
any radios/roms/kernal combo's you think would fix that lemme know.
tried / aokp milestone 6
/ some cm9/10 kernels
/ official rogers radio
/ note radio
/ a few other radios
also tried a resend to switch from providers side/
I was debating trying a factory gb rom just to see.
I am not sure what I can do, I cannot odin to stock either cause my usb port is broken.
*with koodo mobile - I have lte sim, have gotten lte on aokp milestone before in my region, and have apn's set properly
uhhdoug said:
hey guys, I am having an issue with lte, I live in an lte zone, I have reflashed, restore and flashed a few radios but I am not getting lte.
current rom/ cm10 nighlies
what happens is i turn on lte and it gets a blank signal bar and defaults back to h+
any radios/roms/kernal combo's you think would fix that lemme know.
tried / aokp milestone 6
/ some cm9/10 kernels
/ official rogers radio
/ note radio
/ a few other radios
also tried a resend to switch from providers side/
I was debating trying a factory gb rom just to see.
I am not sure what I can do, I cannot odin to stock either cause my usb port is broken.
*with koodo mobile - I have lte sim, have gotten lte on aokp milestone before in my region, and have apn's set properly
Click to expand...
Click to collapse
problem resoved with flashing to an at&t base.(I assumed having an I727r that I should stickwith rogers and was only flashing rogers base/aosp base) I am going to try to go back to cm10 now from this.. wish me luck

[Q] Flashed CM11 on sprint S5 and lost wireless network/data

Hi,
I am rooted using the TWRP kltespr version. I flashed CM11 4-07 nightly and at first lost the ability to make calls but still had LTE data (go online, get email). After a reboot I lost both completely. Can't make calls and can't get data. I have done a complete wipe and clean installs of a few nightly versions. They all install without errors but I still can't get connected to my network. I have done several factory resets. Under mobile network data is enabled, I have tried "prefered network type" set to LTE, Global and 3G. Still no network.
Any help/suggestions getting my network connection back will be appreciated,
thank you
Search for how to fix your APN. I would say to upgrade your version too, the latest build from October does not have this problem anymore I believe.
Just about every AOSP rom is bssed on CM 11 now if your using offical CM 11 rom. I have flased several official. yhey yo spell out KLTESPR. but I chsnged the updater script no problem

Categories

Resources