Hello,
I've recently bought Galaxy S4 clone and it was working great, till I tried rooting it.
The rooting was through *android kingo root* and everything went flawless. After 15 minutes, I noticed that the screen is black but there's backlight led. I thought it might be out of charge or any silly reason, tried every possible solution but couldn't get any help.
The phone turns on and I can receive calls and reply by guessing the place, I also can hear the unlock/lock sounds. But no luck in turning screen on.
Any help guys ?
this is urgent
Bump.
Sorry but the case is realy urgent. Please enlighten me with any help. /:
This is really important guys /:
Hope anyone can give me a hint ..
Clone
Don't know about a clone but i can think of just two things,
First maybe it's a hardware problem and need to be repaired!
Second if it is caused due to rooting or anything then you can try flashing the official firmware of your device (if available).
_maninder_ said:
Don't know about a clone but i can think of just two things,
First maybe it's a hardware problem and need to be repaired!
Second if it is caused due to rooting or anything then you can try flashing the official firmware of your device (if available).
Click to expand...
Click to collapse
Well I think its a hardware problem, because the phone starts up and I can hear sounds.
I could get a screenshot from the phone and see the karnel/baseband ... etc (Attachments)
I don't know where I could find a replacement screen or a rom flashed. Could you assist me with some hints or links?
Thanks.
Omar_ said:
Well I think its a hardware problem, because the phone starts up and I can hear sounds.
I could get a screenshot from the phone and see the karnel/baseband ... etc (Attachments)
I don't know where I could find a replacement screen or a rom flashed. Could you assist me with some hints or links?
Thanks.
Click to expand...
Click to collapse
A screen you should be able to order from china. A rom, now that will be harder to find as clone have almost no support or developers.
zelendel said:
A screen you should be able to order from china. A rom, now that will be harder to find as clone have almost no support or developers.
Click to expand...
Click to collapse
I believe its a hardware one's. The touch works fine
Could you give me a link? I couldn't find any screen.
Omar_ said:
I believe its a hardware one's. The touch works fine
Could you give me a link? I couldn't find any screen.
Click to expand...
Click to collapse
Well see thats the issue with clones. No telling what part they used from where.
This is all I could find.
http://forum.xda-developers.com/showthread.php?t=2512243
To be honest it maybe cheaper to replace the device with an authentic version from somewhere like swappa or something.
zelendel said:
Well see thats the issue with clones. No telling what part they used from where.
This is all I could find.
http://forum.xda-developers.com/showthread.php?t=2512243
To be honest it maybe cheaper to replace the device with an authentic version from somewhere like swappa or something.
Click to expand...
Click to collapse
Well, at the moment I have no money at all. I spent it all on the phone and didn't complete 2 weeks. I will try to save some money in the next months to buy another phone or parts.
If anyone has another solution please tell me.
Related
hi all,
i just fixed my polaris with a new LCD screen.
and now i want to boot android but neither sd and nand breaks the boot.
when i boot it, i get verry weird lines, all colored lines.
i already changed the lcd type panel from 1 to 3 but the lines stil remain
i REALLY want to boot into android.
so someone with the same problem who solved it can you help me fix it please!
Thanks,
Nick
Probably the lcd is not compatible,
which model of lcd do you have?
could you post a photo?
l1q1d said:
Probably the lcd is not compatible,
which model of lcd do you have?
could you post a photo?
Click to expand...
Click to collapse
this is the screen i bought.
cgi.ebay.nl/LCD-LC-Display-Fit-HTC-Touch-Cruise-P3650-XDA-Orbit-II-/260721932197?pt=DE_PDA_Zubeh%C3%B6r_KM&hash=item3cb43cf7a5&autoredirect=off
thank-you for your reply
please,
no one had a similair issue ?
nickislauw said:
please,
no one had a similair issue ?
Click to expand...
Click to collapse
I've sold the 'fixed' phone and bought a non-fixed, geniune one (though also used).
The experienced fixers told me the lcd being put in place of originals, are not 10% compatiblewith stock ones, WM deals with this, but android does not.
vovkav said:
I've sold the 'fixed' phone and bought a non-fixed, geniune one (though also used).
The experienced fixers told me the lcd being put in place of originals, are not 10% compatiblewith stock ones, WM deals with this, but android does not.
Click to expand...
Click to collapse
ok thanks, so this mean i must buy another screen to run android ?
Hello! I have the same problem may have already found a solution?
Just wondering if Google now can be added to the stock ICS rom on the Galaxy Tablet 2. Of course the tablet is rooted, but just wondering which package if any I should use.
Thanks
On cm9 there was a way to put it on cm9, otherwise unless if you go to jellybean im pretty sure there is no other way sorry.
Sent from my Infuse 4g
Ryanscool said:
On cm9 there was a way to put it on cm9, otherwise unless if you go to jellybean im pretty sure there is no other way sorry.
Sent from my Infuse 4g
Click to expand...
Click to collapse
Cheers mate thanks for that
here's a method
http://forum.xda-developers.com/showpost.php?p=29756226&postcount=2856
Hallo, i know this thread will be not the right one to post this, but couldnt find the right one anyway. I saw it was about the Medion P5001 smartphone and im looking for a new screen, mine is broken, does someone know where and how to get a screen that i can try to fix it myself?
tkx
StraffeHendrick said:
Hallo, i know this thread will be not the right one to post this, but couldnt find the right one anyway. I saw it was about the Medion P5001 smartphone and im looking for a new screen, mine is broken, does someone know where and how to get a screen that i can try to fix it myself?
tkx
Click to expand...
Click to collapse
I know this thread is old but I ran into the same problem - after some researching I discovered that the p5001 is actually a "cloned" Coolpad 7295C, if you pop the back cover open and look at the lower left corner you should see faint coolpad model number "7295C" - search aliexpress, ebay or something similar and you'll find lots of cheap parts. good luck !
ibmchas said:
I know this thread is old but I ran into the same problem - after some researching I discovered that the p5001 is actually a "cloned" Coolpad 7295C, if you pop the back cover open and look at the lower left corner you should see faint coolpad model number "7295C" - search aliexpress, ebay or something similar and you'll find lots of cheap parts. good luck !
Click to expand...
Click to collapse
Actually it was for someone else, but that guy isnt answering me anymore, so tkx for the info but its not needed anymore.
Hey there.
I bought a Surface 2 Pro 128gb last week. Today I encounter a "big" problem: neither the touch or movement of my pen are not recognized anymore.
I've already tried to uninstall the second USB INPUT DEVICE under HUMAN INTERFACE DEVICES in the Device Manager and it did not solve.
Did that happen with anyone of you guys??? Any ideas??
rodpalma said:
Hey there.
I bought a Surface 2 Pro 128gb last week. Today I encounter a "big" problem: neither the touch or movement of my pen are not recognized anymore.
I've already tried to uninstall the second USB INPUT DEVICE under HUMAN INTERFACE DEVICES in the Device Manager and it did not solve.
Did that happen with anyone of you guys??? Any ideas??
Click to expand...
Click to collapse
Sounds like time for a refresh.
cx1 said:
Sounds like time for a refresh.
Click to expand...
Click to collapse
That, and if it still doesn't work try this driver
http://us.wacom.com/en/feeldriver
lopezk38 said:
That, and if it still doesn't work try this driver
http://us.wacom.com/en/feeldriver
Click to expand...
Click to collapse
tried that driver too .. no luck
Have you tried the refresh?
Also somewhat obvious and I assume you have tried but best to cover anyway, you havent simply had the tip fall out of the pen have you?
Otherwise it might be time for an RMA.
SixSixSevenSeven said:
Have you tried the refresh?
Also somewhat obvious and I assume you have tried but best to cover anyway, you havent simply had the tip fall out of the pen have you?
Otherwise it might be time for an RMA.
Click to expand...
Click to collapse
thanks for your reply ...
i've already tried the refresh too .. I've tested the pen on another device (galaxy note) and it worked well ..
.. i guess the digitizer is dead somehow ..
rodpalma said:
thanks for your reply ...
i've already tried the refresh too .. I've tested the pen on another device (galaxy note) and it worked well ..
.. i guess the digitizer is dead somehow ..
Click to expand...
Click to collapse
If the digitizer is dead then you should be able to get the device replaced under warranty.
SixSixSevenSeven said:
If the digitizer is dead then you should be able to get the device replaced under warranty.
Click to expand...
Click to collapse
Not only will they replace it under warranty, but when I took my SP1 with a dead digitizer into a Microsoft store they let me pay the $200 difference and get a SP2 as a replacement.
Techrocket9 said:
...they let me pay the $200 difference and get a SP2 as a replacement.
Click to expand...
Click to collapse
Are you jokeing? O_O My rear camera is dead, but i need my SF for work, so i didn't consider sending it back so far (as i don't really need the cam anyways)...
Anoter problem is: i didn't buy my SF in a MS-store... Do you think i can get this offered at the online store? (as there is no Microsoft store in my country atm...)
Maybe i'll give them a call tomorrow i'll let you guys know what they said
tfBullet said:
Are you jokeing? O_O My rear camera is dead, but i need my SF for work, so i didn't consider sending it back so far (as i don't really need the cam anyways)...
Anoter problem is: i didn't buy my SF in a MS-store... Do you think i can get this offered at the online store? (as there is no Microsoft store in my country atm...)
Maybe i'll give them a call tomorrow i'll let you guys know what they said
Click to expand...
Click to collapse
Tell us!! What did they say???
I everyone, sorry if I ask.
I've bought a chinese OPO and I've seen that, at the bottom of the screen I've the "famous" yellow line.
Is there a way to fix it?
Thanks in advance.
Castore said:
I everyone, sorry if I ask.
I've bought a chinese OPO and I've seen that, at the bottom of the screen I've the "famous" yellow line.
Is there a way to fix it?
Thanks in advance.
Click to expand...
Click to collapse
does it stay every time ?? like even at boot
if yes replace the phone its hardware problem
no solutions for that.
@SidDev said:
does it stay every time ?? like even at boot
if yes replace the phone its hardware problem
no solutions for that.
Click to expand...
Click to collapse
I fear you're right.
Castore said:
I fear you're right.
Click to expand...
Click to collapse
I hope you are under warranty ?
if not repair it from local repair center .
@SidDev said:
I hope you are under warranty ?
if not repair it from local repair center .
Click to expand...
Click to collapse
Yes, I'm under warranty but I've bought the phone from China and I'm from Italy, only the ship cost will be more than the repair.
There's no place to repair a china phone here, nobody even known the phone
But it's a problem that has a lot of OPO and the manufacturer said that, they're good enough and, even N% has yellow screens...
But I'm really not happy with this phone, not only for the yellow line.
There is no way to fix it, with usage and time it gets slightly better. 99% of phones have this, so you should not have bought the phone, if you think this is a deal breaker.
Dzhedaj said:
There is no way to fix it, with usage and time it gets slightly better. 99% of phones have this, so you should not have bought the phone, if you think this is a deal breaker.
Click to expand...
Click to collapse
at least not 99%
Dzhedaj said:
There is no way to fix it, with usage and time it gets slightly better. 99% of phones have this, so you should not have bought the phone, if you think this is a deal breaker.
Click to expand...
Click to collapse
I didn't know that this kind of phone has this kind of screen. Obviously I never bought a phone with this defect.
I really never bought a phone even if I had known the state of Cyano 11s.
But it'd definitely my fault.
Thanks for the answers.
There's an entire thread dedicated to this. Try using a UV lamp (found at a nail salon) for ten minutes with the device turned off.
Please search before posting.
Transmitted via Bacon
timmaaa said:
There's an entire thread dedicated to this. Try using a UV lamp (found at a nail salon) for ten minutes with the device turned off.
Please search before posting.
Transmitted via Bacon
Click to expand...
Click to collapse
I've seen the post but I've had not seen a solution.
Sorry if I asked.
Damir franc has a video on YouTube
Archipago said:
Damir franc has a video on YouTube
Click to expand...
Click to collapse
I have never had that problem
The display stopped working 2-3 days ago. On booting i can see the google logo for 2-3 seconds before the screen goes dark. The phone works and i can hear dings of messages, but i cant access any of it. Once i kept shut it for a day i was able to see the screen for 10-15 seconds( i used this window to remove the screen lock so that i can use the usb transfer ). Now keeping the phone shut for long duration has no effect.
I can see the fastboot screen but not the recovery screen throught it.
I also bought a slimport so that i could see the screen on my pc. It works (not for the fastboot or recovery), however the touch doesn't work and the volume and power buttons response is too sluggish. I can connect the mouse but it is of no use as i can't see the screen on PC and use the mouse at the same time. I tried adb ( i have no experience of it ) but i cant touch the allow pernmissions key on the screen for the above reasons. Also what advantage would adb be in this case?.
Any advice ?
PS: i have cyanogenmod
I think ram is your only option. It definitely sounds like it's hardware and not software related.
Sent from my Nexus 5 using XDA Free mobile app
Sorry, i don't follow. U mean a ram replacement is needed ?
jd1639 said:
I think ram is your only option. It definitely sounds like it's hardware and not software related.
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
nexmus said:
Sorry, i don't follow. U mean a ram replacement is needed ?
Click to expand...
Click to collapse
It was a typo.. He meant RMA
- Sent from an IceCold Hammerhead!
Oh, you mean sending it to LG for servicing? I am a bit hesitant since i have cyanogenmod and also am in india and i doubt they will give a replacement. I think going back to stock rom and then sending it for repairs might help but i have no idea how to go about doing that in this situation.
vin4yak said:
It was a typo.. He meant RMA
Click to expand...
Click to collapse
nexmus said:
Oh, you mean sending it to LG for servicing? I am a bit hesitant since i have cyanogenmod and also am in india and i doubt they will give a replacement. I think going back to stock rom and then sending it for repairs might help but i have no idea how to go about doing that in this situation.
Click to expand...
Click to collapse
Its all done via fastboot or lg flash tool. Probably the latter is best for you. Have a read of the guides in my signature
How can i do it using fastboot ?
rootSU said:
Its all done via fastboot or lg flash tool. Probably the latter is best for you. Have a read of the guides in my signature
Click to expand...
Click to collapse
nexmus said:
How can i do it using fastboot ?
Click to expand...
Click to collapse
I do t understand the question. Is this question one you're asking having already read the fastboot return to stock guide?
Same issue I had pretty much, it died about 2 months ago. I was still able to copy all of my files, phone worked perfectly but the screen was black. Had it replaced it no time. Is that by any mean a 311k? I've seen another thread like that pop up lately.
vnvman said:
Same issue I had pretty much, it died about 2 months ago. I was still able to copy all of my files, phone worked perfectly but the screen was black. Had it replaced it no time. Is that by any mean a 311k? I've seen another thread like that pop up lately.
Click to expand...
Click to collapse
What does the month it was made have to do with anything?
rootSU said:
What does the month it was made have to do with anything?
Click to expand...
Click to collapse
I don't know yet, I'm just trying to figure out whether it's a particular batch that started failing or it's completely random, just curious. The two replacements I was sent were 403K. Build is perfect, but they both had some light bleed issues. Looks like every batch comes with some good and some bad, QC definitely hasn't been too great on this phone.
vnvman said:
I don't know yet, I'm just trying to figure out whether it's a particular batch that started failing or it's completely random, just curious. The two replacements I was sent were 403K. Build is perfect, but they both had some light bleed issues. Looks like every batch comes with some good and some bad, QC definitely hasn't been too great on this phone.
Click to expand...
Click to collapse
They're not really built in batches. Manufacturing was continuous. They just changed the serial number every time the month changes so I dont think this would actually mean anything
I know but I'd still use it as a milestone more than anything, I mean there have been some differences in the units (eg bigger speaker holes), this way it's easier to track them along the timeline, because they definitely do change something in the manufacturing process from time to time if they have to make up for issues or something. They also did it with the N4 if I remember well.
vnvman said:
I know but I'd still use it as a milestone more than anything, I mean there have been some differences in the units (eg bigger speaker holes), this way it's easier to track them along the timeline, because they definitely do change something in the manufacturing process from time to time if they have to make up for issues or something. They also did it with the N4 if I remember well.
Click to expand...
Click to collapse
Speaker holes is a bad example because even the latest built devices it was still a lottery whether you got bigger or smaller holes. That's down to what you mentioned earlier, QC
rootSU said:
Its all done via fastboot or lg flash tool. Probably the latter is best for you. Have a read of the guides in my signature
Click to expand...
Click to collapse
I was able to unroot and flash the stock image. The problem still exists though, so it has to be a hardware issue. Fortunately the phone is still in warranty.
Thanks for all the support.