Hello, I'm trying to flash a rom 4.4 in my i727 whit ICS but I get an error when it's verifing the radio is newer than jellybean and it says that must be newer than UCMC1 :crying:
I have to flash jellbean rom firts? or where is my problem thanks by any help
If your radio isn't ucmc1 or newer it won't work also you need an updated recovery in order to flash newer ROMs.
Sent from my SAMSUNG-SGH-I727 using Tapatalk
TheCybertronian said:
If your radio isn't ucmc1 or newer it won't work also you need an updated recovery in order to flash newer ROMs.
Sent from my SAMSUNG-SGH-I727 using Tapatalk
Click to expand...
Click to collapse
then I just have to flash a new one? I have the recovery from the dev, thank you :good:
Yes flash the radio and then the ROM.
Sent from my SAMSUNG-SGH-I727 using Tapatalk
thanks b the help, I already flash the ROM :good:
Related
I am using [ROM] MHX-SUPERLITE-3.0 Stable
I am trying to flash my radio from UCLA3 to T-mobile SGH-T989 VK1.
This is the steps I took to flash my radio.
Download Modem & Reboot to Recovery
Wipe cache partition & Wipe dalvik cache
Install and Reboot
But my phone still shows I am using baseband UCLA3 after flashing it.
Can someone help me figure what i screwed up on?
Try flashing a rom thats not ucla3 based, then change modem.
Sent from my Transformer TF101 using xda premium
i am in love with the lite rom... just don't want to give up on my battery =(
unlockingsky said:
I am using [ROM] MHX-SUPERLITE-3.0 Stable
I am trying to flash my radio from UCLA3 to T-mobile SGH-T989 VK1.
This is the steps I took to flash my radio.
Download Modem & Reboot to Recovery
Wipe cache partition & Wipe dalvik cache
Install and Reboot
But my phone still shows I am using baseband UCLA3 after flashing it.
Can someone help me figure what i screwed up on?
Click to expand...
Click to collapse
I've seen several threads now where people claim to not be able to flash away fro the UCLA3 radio (flash a different radio after they have flashed the UCLA3).
I am wondering if there just a lot of people not doing it correctly, or if the UCLA3 radio is really that difficult to flash away from? I'm not going to try it because, so far, I am ok with the results of the UCLA3 radio. Perhaps it is like the UCLA3 kernels and only gives some people a problem? Has anyone successfully flashed away from the UCLA3 radio, and if so, how did you do it (just a radio flash or an entire clean radio, Rom, and kernel flash)?
you gotta be kidding me... i feel like i am using a iphone again..
I had to flash a non ucla3 rom to get my baseband to change. Not that it really matters to me. Ucla3 modem is kick ass:thumbup:
Sent from my SAMSUNG-SGH-I727 using xda premium
cdshepherd said:
I had to flash a non ucla3 rom to get my baseband to change. Not that it really matters to me. Ucla3 modem is kick ass:thumbup:
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
I agree, UCLA3 modem is an improvement, but I wonder if it will stop an OTA update if everything is back to stock except the modem (baseband)? A pre-UCLA3 ROM (and maybe Kernel) with the UCLA3 modem.
unlockingsky said:
i am in love with the lite rom... just don't want to give up on my battery =(
Click to expand...
Click to collapse
Maybe you should ask mhx to build a rom without the radio included (if possible)
kiru said:
Maybe you should ask mhx to build a rom without the radio included (if possible)
Click to expand...
Click to collapse
pretty sure the MHX-SUPERLITE 3.0 is just rom/kernel... and you flash modem separately.
DoctorQMM said:
pretty sure the MHX-SUPERLITE 3.0 is just rom/kernel... and you flash modem separately.
Click to expand...
Click to collapse
This, is correct
So then flash the baseband you want on a non ucla3 rom. Then flash the ucla3 based rom and the baseband should stick.
Sent from my SAMSUNG-SGH-I727 using xda premium
i tried flashing it away from the ucla3 radio... it did not work. i am just stomped. maybe some can provide some troubleshooting step?
unlockingsky said:
i tried flashing it away from the ucla3 radio... it did not work. i am just stomped. maybe some can provide some troubleshooting step?
Click to expand...
Click to collapse
Did you try to flash the modem you want.... then flash the MHX rom again right after?
cdshepherd said:
So then flash the baseband you want on a non ucla3 rom. Then flash the ucla3 based rom and the baseband should stick.
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
You have to do this^^^^^^^^^
unlockingsky said:
i tried flashing it away from the ucla3 radio... it did not work. i am just stomped. maybe some can provide some troubleshooting step?
Click to expand...
Click to collapse
okay it actually worked!!!
but the bad news is that i spent 20min on the phone and the battery drop 20%.
looks like i will be going back to ucla3 modem.
UCLA3 rom, modem and kernal all work best together it seems
Sent from my SAMSUNG-SGH-I727 using xda premium
can i upgrade my GT P6200 baseband P6200XXKL7 kernel version 2.6.36-P6200XXKL9-CL605411 [email protected]#3 HTJ85B P6200XXKL9 specified made in vietnam with this P6200XXLQ1_P6200OXALQ1 specified for Austria
Yes.. use odin to flash the ICS australia rom..
my tab is philippines version of HC but i still flashed australia ICS
Works like charm..
Sent from my GT-P6200 using XDA Premium HD app
Try the latest one
http://forum.xda-developers.com/showthread.php?t=2172370
Sent from my GT-P6200 using xda premium
Hello, I too was wondering if I can upgrade my tab 7.0 plus 3g with wifi to ICS? GT-P6200,baseband P6200XXKL7,Kernal is [email protected] #43. Build number is HTJ85B.XXKL7 P6200XXKL7. Is it possible? I don't wanna brick it up. Thank You.
Has ics been released for US yet?
Sent from my pretty xparent purple tapatalk
I flash it the latest one..the region code is ORL..it was said 'unknown'..i'm from indonesia..and it is running well and smooth..
Sent from my GT-P6200 using xda premium
May i know what's the diffrence with that latest ICS ROM with the UK ROM? Im tunning the UK ROM ever since and i haven't got any problems with it.. Thanks!
Sent from my GT-P6200 using XDA Premium HD app
kcerica said:
Has ics been released for US yet?
Sent from my pretty xparent purple tapatalk
Click to expand...
Click to collapse
US Models are SGH-T869 (T-Mobile) and SGH-P6210 (WiFi only). So...yes: http://www.samsung.com/us/support/SupportOwnersFAQPopup.do?faq_id=FAQ00046726&fm_seq=49755
Hey guys. Need some advice. I got this device from a friend. She bought it in China. It's a 3G GT-P6200. Now, the issues is that I don't know to which carrier it belonged to, and I want to flash an ICS stock ROM on it.
Here's the data:
Baseband version: P6200ZCKL2
Kernel: [email protected] #3
Build number: HTJ85B.ZKLC2 P6200ZCKL2
I'd like to flash the stock ROM for my country, Serbia. This is what I get in the recovery mode. Do you have any recommendations?
Thanks in advance
Hypercaine said:
Hey guys. Need some advice. I got this device from a friend. She bought it in China. It's a 3G GT-P6200. Now, the issues is that I don't know to which carrier it belonged to, and I want to flash an ICS stock ROM on it.
Here's the data:
Baseband version: P6200ZCKL2
Kernel: [email protected] #3
Build number: HTJ85B.ZKLC2 P6200ZCKL2
I'd like to flash the stock ROM for my country, Serbia. This is what I get in the recovery mode. Do you have any recommendations?
Thanks in advance
Click to expand...
Click to collapse
Uhmmmm is it open line? I think thats your main problem.. you can check if theres a firmware for your country in www.samfirmware.com or just use the latest firmware mentioned by someone above..
If you want to flash to flash firmware.. not in the recovery mode but in odin mode.. power button + volume down..
Sent from my GT-P6200 using XDA Premium HD app
Is it safe to flash a firmware from a diffetent country? I really don't want to brick my tablet.
Sent from my GT-P6200
xTepego617 said:
Is it safe to flash a firmware from a diffetent country? I really don't want to brick my tablet.
Sent from my GT-P6200
Click to expand...
Click to collapse
Yes and yes and yes..
You wont be bricking your tablet by flashing roms from different country.. my tab was from the philippines and i flashed UK ICS rom..
No problem with it..
A way of bricking you tab is wiping from ICS STOCK RECOVERY..
Remember that well.. but wiping from HC Stock recovery is safe and from CWM..
Sent from my GT-P6200 using XDA Premium HD app
Ok cool I used odin to flash ICS firmware ORL onto my HC firmware so far so good. now sorry to ask this but can I install CWm on to it no problem along with root? Can I install the root also? Thank You so much.
xTepego617 said:
Ok cool I used odin to flash ICS firmware ORL onto my HC firmware so far so good. now sorry to ask this but can I install CWm on to it no problem along with root? Can I install the root also? Thank You so much.
Click to expand...
Click to collapse
Yes u can bro..just pick the odin version..the easiest way..
Sent from my GT-P6200 using xda premium
xTepego617 said:
Ok cool I used odin to flash ICS firmware ORL onto my HC firmware so far so good. now sorry to ask this but can I install CWm on to it no problem along with root? Can I install the root also? Thank You so much.
Click to expand...
Click to collapse
Get CWM from the dev section.. use the repacked 6.0.2.7 CWM.. flash it via odin.. the from CWM recovery.. flash root.zip
Sent from my GT-P6200 using XDA Premium HD app
hi
theejay0625 said:
Yes.. use odin to flash the ICS australia rom..
my tab is philippines version of HC but i still flashed australia ICS
Works like charm..
Sent from my GT-P6200 using XDA Premium HD app
Click to expand...
Click to collapse
hi sir can u give me odin and firware and tut on how ur tab is philippines version of HC but u i still flashed australia ICS thanks
mckenzie2013 said:
hi sir can u give me odin and firware and tut on how ur tab is philippines version of HC but u i still flashed australia ICS thanks
Click to expand...
Click to collapse
Try this http://forum.xda-developers.com/showthread.php?t=2349776 It should work. Read Read Read
Dont forget to thank THEDEVIOUS1
I am currently using CM10 Rom with Marmite kernel 8.3+
Performane wise it is good, but battery has been a big problem for me, as the stock 4.1.1 sojuk was way good in battery performance..
My phone has TWRP recovery and I have the official stock .zip file for my phone (Nexus S M200)...
The question is that flashing firmware via recovery is recommended or not? Will i brick my phone or what? Will my phone work perfect after flashing stock firmware via twrp? I dont want to use the fastboot method pls...
Need the answers fast
Sent from my Nexus S using xda premium
Maisam.asif said:
Will my phone work perfect after flashing stock firmware via twrp?
Click to expand...
Click to collapse
Yes.
ej8989 said:
Yes.
Click to expand...
Click to collapse
Will I loose twrp recovery after flashing stock or what? Details please
Sent from my Nexus S using xda premium
Maisam.asif said:
Will I loose twrp recovery after flashing stock or what? Details please
Sent from my Nexus S using xda premium
Click to expand...
Click to collapse
There are few stock ROMs in development thread which are flashable via twrp/cwm, you'll not gonna loose your recovery.
_hito_ said:
There are few stock ROMs in development thread which are flashable via twrp/cwm, you'll not gonna loose your recovery.
Click to expand...
Click to collapse
Can you please get a link to the post, as I wasnt able to search it...
Though, I found the official stock rom in .zip format (100% confirmed)... should I use this ROM for flashing? Loosing recovery or root doesnt matter... i can get that back anytime...
Sent from my Nexus S using xda premium
Flashing with fastboot cmd or twrp? What do you guys suggest? I just want the official stock rom back...
Sent from my Nexus S using xda premium
Maisam.asif said:
Flashing with fastboot cmd or twrp? What do you guys suggest? I just want the official stock rom back...
Sent from my Nexus S using xda premium
Click to expand...
Click to collapse
Just flash it via TWRP if that's more convenient for you.
ej8989 said:
Yes.
Click to expand...
Click to collapse
Thanks a lot for this precious info
Maisam.asif said:
Thanks a lot for this precious info
Click to expand...
Click to collapse
I quoted just one question and i answered straight. Besides, your phone won't work perfect if it's bricked lol.
So yea, that question and that answer is sufficient for you to calm down and JUST FLASH IT. :good:
hello,
could anyone tell me if you can flash the stock recovery mode back onto a samsung galaxy ace 2. i have cwm on it but i would like to have it back to stock. can anyone give me a link to it?
We have only temp cwm.
If u have D-Kernel, flash stock kernel.
flash stock rom, search on sammobile, then flash it via odin, that's the best way
lol4topnz said:
We have only temp cwm.
If u have D-Kernel, flash stock kernel.
Click to expand...
Click to collapse
On GB we have permanent
Sent from my GT-I8160 using xda premium
but is there not a way to flash just the stock recovery instead of downloading all of it
chris_d_1 said:
but is there not a way to flash just the stock recovery instead of downloading all of it
Click to expand...
Click to collapse
If you ask a question it's recommended to read the answers.
Lol4... Gives the answer.
Flash stock kernel!
Sent from my GT-I8160 using xda premium
xXmyselfXx said:
If you ask a question it's recommended to read the answers.
Lol4... Gives the answer.
Flash stock kernel!
Sent from my GT-I8160 using xda premium
Click to expand...
Click to collapse
but do you have a link for it? the one in the forum index here has cwm on it but i need the stock recovery for the gingerbread version
Get one from the stock ROM
Hello,
I took the OTA update and tried flashing (using safestrap) one of the 4.3 roms that will work on the phone (Clean Rom 8).
The rom boots up fine but there is no Wifi. I tried flashing that popular modem thing and it still didn't work. Can anyone help? Thanks in advanced.
Good back into the Safestrap thread and download the VRUCML1 kernel modules. You need to flash those after each clean flash of a VRUCML1 4.3 rom to have working wifi.
Sent from my SCH-I535 using Tapatalk 4
SlimSnoopOS said:
Good back into the Safestrap thread and download the VRUCML1 kernel modules. You need to flash those after each clean flash of a VRUCML1 4.3 rom to have working wifi.
Sent from my SCH-I535 using Tapatalk 4
Click to expand...
Click to collapse
Thank you! worked great