Firmware Info :
Model: SM-N9005
Country: Macedonia
Version: Android 4.4.2
Changelist: 348029
Build date: 11.01.2014
Product Code: MBM
Installation method :
1) Extract (unzip) the firmware file of Galaxy Note 3 (Snapdragon) SM-N9005
2) Download Latest Odin3
3) Extract Odin .ZIP file
4) Open Odin3 v3.09
5) Restart your Galaxy Note 3 (Snapdragon) SM-N9005 in download mode
How to = (Press and hold Home + Power + Volume Down buttons)
6) Connect Galaxy Note 3 (Snapdragon) SM-N9005 and wait until you get a blue sign in Odin
7) Add AP_N9005XXUENA7_XXXXXXXX.tar.md5 to AP
8) Uncheck re-partition Option
9) Click start button, and wait
Note * In case of any error in updating firmware of Galaxy Note 3 (Snapdragon) SM-N9005 (Any FC, Bootloop etc.)
1) Boot into recovery mode (Home+power+vol up)
2) Choose to wipe/factory reset. (THIS WILL ERASE ALL OF YOUR DATA INCLUDING YOUR INTERNAL SD CARD!)
3) Then choose reboot
DOWNLOAD
Thanks
Sent from my SM-N9005 using Tapatalk
---------- Post added at 11:06 PM ---------- Previous post was at 10:20 PM ----------
radekklamzynski7 said:
Firmware Info :
Model: SM-N9005
Country: Macedonia
Version: Android 4.4.2
Changelist: 348029
Build date: 11.01.2014
Product Code: MBM
DOWNLOAD
Click to expand...
Click to collapse
Cant download ..
Any other mirror plz
Sent from my SM-N9005 using Tapatalk
Anyone knows if this is branded/carrier specific? The csc seems to be the same as the carrier specific NA7s.
Can this be flashed over unbranded NA6?
Sent from my SM-N9005 using Tapatalk
mikkelrev69 said:
Anyone knows if this is branded/carrier specific? The csc seems to be the same as the carrier specific NA7s.
Can this be flashed over unbranded NA6?
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
New changelist... but what changed?
Have anyone flashed via mobile odin?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I do not speak German!!!
firasusman said:
Thanks
Sent from my SM-N9005 using Tapatalk
---------- Post added at 11:06 PM ---------- Previous post was at 10:20 PM ----------
Cant download ..
Any other mirror plz
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
Terafile link works.
Sent from my SM-N9005 using Tapatalk
mikkelrev69 said:
Terafile link works.
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
Yes..
It requires premium account to download more than 1 GB file ...
Sent from my SM-N9005 using Tapatalk
Please Remove Macedonia from Title.
The Country is Named F.Y.R.O.M . Macedonia is Greek and will remain forever.
firasusman said:
Yes..
It requires premium account to download more than 1 GB file ...
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
It was not a q. It was a statement. But you can download more than 1Gb without premium ac. (at least it used to be possible). It just takes forever.
I guess most people can afford 5€ or so (don't rem exactly) for premium with a month of downloads...
Sent from my SM-N9005 using Tapatalk
be patient guys/girls, I don't think official release come with separated AP CP CSC and bloody BL.
-Remember lesson on NA6 Leak.
Sent from my GT-I9300 using Tapatalk
Remove the Country : macedonia from the 1rst post.
fraris said:
Remove the Country : macedonia from the 1rst post.
Click to expand...
Click to collapse
why????????????????????
lonelyw said:
why????????????????????
Click to expand...
Click to collapse
Macedonia is a valid country name, but when Macedonia became a member of the United Nations in 1993 , as a result of a dispute with Greece over its name, it was admitted under the provisional reference of the former Yugoslav Republic of Macedonia alias FYROM.
http://en.wikipedia.org/wiki/Macedonia_naming_dispute
Samsung isnt interesting to this dispute so they use Macedonia name.
Just flashed Macedonian NA7 and what a nervewreck. I was on PHN NA6 (unbranded), flashing went well all the way untill the last bit where Odin suddenly said FAIL!
Wow! I unplugged and tried reboot, but only to get bootloader stating error "try emergency recovery by kies" (or something like that). I tried booting to recovery but same happend. Tried rebooting again only to get the same error message. Then I pulled battery and rebooted, again the same error from bootloader. At last I got it to download mode and tried flashing CWM to be able to install backup. It flashed fine but then it wouldn't boot to recovery. Suddenly it just rebooted normaly and I could log on.
Now strangely device info says I'm on NA7 so the fw flash must have succeeded afterall. Info says Bootloader is still NA6.
Rooting with CF-autoroot went well. Same with CWM. Haven't noticed any changes so far, but I have not tested for ext.sd bug yet.
Enyone else faced this when flashing NA7?
Sent from my SM-N9005 using Tapatalk
mikkelrev69 said:
Just flashed Macedonian NA7 and what a nervewreck. I was on PHN NA6 (unbranded), flashing went well all the way untill the last bit where Odin suddenly said FAIL!
Wow! I unplugged and tried reboot, but only to get bootloader stating error "try emergency recovery by kies" (or something like that). I tried booting to recovery but same happend. Tried rebooting again only to get the same error message. Then I pulled battery and rebooted, again the same error from bootloader. At last I got it to download mode and tried flashing CWM to be able to install backup. It flashed fine but then it wouldn't boot to recovery. Suddenly it just rebooted normaly and I could log on.
Now strangely device info says I'm on NA7 so the fw flash must have succeeded afterall. Info says Bootloader is still NA6.
Rooting with CF-autoroot went well. Same with CWM. Haven't noticed any changes so far, but I have not tested for ext.sd bug yet.
Enyone else faced this when flashing NA7?
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
It is the same as NA6, but T-Mobile branded
Pierre118 said:
It is the same as NA6, but T-Mobile branded
Click to expand...
Click to collapse
So it is branded afterall? Where did you find that info?
Now device info says I have no csc. Sammobile app's fw checker shows no csc also.
Maybe I will install my NA6 backup instead or reflash PHN NA6.
Sent from my SM-N9005 using Tapatalk
mikkelrev69 said:
So it is branded afterall? Where did you find that info?
Now device info says I have no csc. Sammobile app's fw checker shows no csc also.
Maybe I will install my NA6 backup instead or reflash PHN NA6.
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
When you go to http://live.samsung-updates.com/ .....hold your mouse over 'Region' and it will tell you.
Pierre118 said:
When you go to http://live.samsung-updates.com/ .....hold your mouse over 'Region' and it will tell you.
Click to expand...
Click to collapse
Ok. Sammobile.com's FW download page shows only Macedonian without the carrier name which is present on all their other carrier specific FWs
I Flashed back to unbranded NA6.
Sent from my SM-N9005 using Tapatalk
Damn it... I guess the update still fails from unbranded to branded CSC. This is bad news.
Dont we have enough Kitkat threads?
And dont tell me because this is a new firmware. Sammobile provides that for us!
Related
Finally...Official ICS is out
GT-P6200 - Open Austria
PDA: P6200XXLQ1
CSC: P6200OXALQ1
Version: 4.0.4
Date: 2012-06-26
Regions: Austria, Belgium, France, Germany, Hungary, Italy, Spain, United Kingdom
Flash with odin
Download
www.hotfile.com/dl/162811167/9e67b52/P6200XXLQ1_P6200OXALQ1_ATO.zip.html
NOTE : ONLY FOR GT-6200 dont try it with the other device...even with GT-6201..
Screenshoot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my GT-P6800 using Tapatalk 2
This isn't development...
i have wifi issue is anyone has this problem too?
Owh really... i have not tried it. I'll try it soon.
Sent from my GT-P6800 using Tapatalk 2
Anyone can root isc for p6200?
Sent from my GT-P6200 using xda premium
Yudha_krenz said:
Finally...Official ICS is out
GT-P6200 - Open Austria
PDA: P6200XXLQ1
CSC: P6200OXALQ1
Version: 4.0.4
Date: 2012-06-26
Regions: Austria, Belgium, France, Germany, Hungary, Italy, Spain, United Kingdom
Flash with odin
Download
www.hotfile.com/dl/162811167/9e67b52/P6200XXLQ1_P6200OXALQ1_ATO.zip.html
I still download this update n i'll update my girl's GT-6200 soon
Sent from my GT-P6800 using Tapatalk 2
Click to expand...
Click to collapse
Thank you!!
One question: re partition in Odin flag Yes, or flag not?
again thank you!!
traitimlua said:
Anyone can root isc for p6200?
Sent from my GT-P6200 using xda premium
Click to expand...
Click to collapse
Root OK: LINK
arby8863 said:
Thank you!!
One question: re partition in Odin flag Yes, or flag not?
again thank you!!
Click to expand...
Click to collapse
Not selected repartition!
LINK
Hello,
I tried to flash the rom via MobileOdin - now keep stuck in the boot loop!
Now, I try to flash via Odin the P6200OXALQ1_P6200XXLQ1_P6200XXLQ1_HOME.tar.md5 file,
but no luck, keep hanging in Setup Connection ( Odin 1.85 ) can anyone help me out?
greetz
Now I'am on Clockworkmod Recovery v.5.8.15
mycso said:
Root OK: LINK
Not selected repartition!
LINK
Click to expand...
Click to collapse
dorenthe said:
Hello,
I tried to flash the rom via MobileOdin - now keep stuck in the boot loop!
Now, I try to flash via Odin the P6200OXALQ1_P6200XXLQ1_P6200XXLQ1_HOME.tar.md5 file,
but no luck, keep hanging in Setup Connection ( Odin 1.85 ) can anyone help me out?
greetz
Now I'am on Clockworkmod Recovery v.5.8.15
Click to expand...
Click to collapse
Wipe data in recovery can fix this. If not, you must reflash over odin
binht611 said:
Wipe data in recovery can fix this. If not, you must reflash over odin
Click to expand...
Click to collapse
I tried everything - now i could flash it via odin 1.85 and after flashing it reboots but still in boot loop...
dorenthe said:
I tried everything - now i could flash it via odin 1.85 and after flashing it reboots but still in boot loop...
Click to expand...
Click to collapse
Did you wipe data in recovery
Yes, I did
binht611 said:
Did you wipe data in recovery
Click to expand...
Click to collapse
it is working with this one -> P6200XXKL7_P6200XXKL7_P6200XEUKL1_HOME.tar.md5
but not working with this one -> P6200OXALQ1_P6200XXLQ1_P6200XXLQ1_HOME.tar.md5
any ideas?
dorenthe said:
Yes, I did
it is working with this one -> P6200XXKL7_P6200XXKL7_P6200XEUKL1_HOME.tar.md5
but not working with this one -> P6200OXALQ1_P6200XXLQ1_P6200XXLQ1_HOME.tar.md5
any ideas?
Click to expand...
Click to collapse
Have you tried changing your .pit file? I've had the same problem, I changed the .pit file and checked repartition. Hope this will help.
Pit file link: www.media*fire..com/?dyb1baamli8b6d0
I didn't use the pit file. I only putted the tar file to PDA mode in odin and started the flash. It's ok and no bootloop. Just now i did it
Sent from my GT-P6800 using Tapatalk 2
4.0.4 with TouchWiz, Work perfect!
Thnks
I tried with and without the PIT File - no luck at all !
Yudha_krenz said:
I didn't use the pit file. I only putted the tar file to PDA mode in odin and started the flash. It's ok and no bootloop. Just now i did it
Sent from my GT-P6800 using Tapatalk 2
Click to expand...
Click to collapse
dorenthe said:
I tried with and without the PIT File - no luck at all !
Click to expand...
Click to collapse
When u flashed without pit file did u unchecked "repartition" already?
Sent from my GT-P6800 using Tapatalk 2
xsoullz said:
i have wifi issue is anyone has this problem too?
Click to expand...
Click to collapse
I dont have wifi issue. What is the issue that u have?
Sent from my GT-P6800 using Tapatalk 2
Come on guys not even one screen shot, you're killing me here.
Yes I've done that
Flashed with PIT - chechek the check-box
Flashed without PIT and unchecked the box
is something wrong with the rom-file?
Yudha_krenz said:
When u flashed without pit file did u unchecked "repartition" already?
Sent from my GT-P6800 using Tapatalk 2
Click to expand...
Click to collapse
Here is the full odin stock firmware for GT-P5110 downloaded from samsung-updates.com (BIG THANKS TO SAMSUNG-UPDATE) :laugh:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DOWNLOAD MIRROR
http://www.hotfile.com/dl/171184515/4b76f5d/P5110XXBLH4_P5110OXXBLH3_NEE.zip.html
Another Mirror from (philippu1988)
http://www.share-online.biz/dl/BR3DZBAMTPB
GT-P5110 - Finland
PDA: P5110XXBLH4
CSC: P5110OXXBLH3
Version: 4.0.4
Date: 28.08.2012
Regions: Austria, Belgium, France, Germany, Hungary, Italy, Spain, United Kingdom
Installing this when coming from a custom ROM:
1. Boot in recovery and do a factory reset/wipe cache/wipe dalvik
2. Boot in download mode
3. Extract firmware on your computer and open odin
4. Connect your tablet
5. Put the firmware file in PDA in odin
6. Flash and reboot
Note: Best way is via Mobile Odin
Did you flash it? Downloaded file is always corrupted.
Enviado desde mi Galaxy Tab2
Yes i did via mobile odin
demonstone said:
Did you flash it? Downloaded file is always corrupted.
Enviado desde mi Galaxy Tab2
Click to expand...
Click to collapse
And if i am italian ?
It has multi csc included
Regions: Austria, Belgium, France, Germany, Hungary, Italy, Spain, United Kingdom
Andrew1998 said:
And if i am italian ?
Click to expand...
Click to collapse
jamesclinton said:
It has multi csc included
Regions: Austria, Belgium, France, Germany, Hungary, Italy, Spain, United Kingdom
Click to expand...
Click to collapse
Ok so if in future will be released an updating i will can update by kies (recognized like a p5110. Italian) ? In Your tablet have you installed any fonts or you have the stock?
Link is dead, any chance for working mirror?
Yes and yes to font from playstore
Andrew1998 said:
Ok so if in future will be released an updating i will can update by kies (recognized like a p5110. Italian) ? In Your tablet have you installed any fonts or you have the stock?
Click to expand...
Click to collapse
mirror added
vault1965 said:
Link is dead, any chance for working mirror?
Click to expand...
Click to collapse
jamesclinton said:
mirror added
Click to expand...
Click to collapse
Thanks man, will report after flash. Did mobile Odin successfully rooted firmware during flash?
Sent from my HTC Sensation Z710e using Tapatalk 2
Yes,with the latest version of mobile Odin
vault1965 said:
Thanks man, will report after flash. Did mobile Odin successfully rooted firmware during flash?
Sent from my HTC Sensation Z710e using Tapatalk 2
Click to expand...
Click to collapse
jamesclinton said:
Yes,with the latest version of mobile Odin
Click to expand...
Click to collapse
what is the lates version of odin?
Mobile ODIN v3.30 you can get it from here http://forum.xda-developers.com/showthread.php?t=1347899
Andrew1998 said:
what is the lates version of odin?
Click to expand...
Click to collapse
jamesclinton said:
Mobile ODIN v3.30 you can get it from here http://forum.xda-developers.com/showthread.php?t=1347899
Click to expand...
Click to collapse
thank u, you're a really good person. Where are u from or where do you live?
sorry an answer...why mobile odin ?_? :S i can't use odin 1.85 and add the pdaa on computer?
1.Am from Germany
2.Yes you can use pc odin but if you want root on the fly then mobile odin is better
Andrew1998 said:
thank u, you're a really good person. Where are u from or where do you live?
sorry an answer...why mobile odin ?_? :S i can't use odin 1.85 and add the pdaa on computer?
Click to expand...
Click to collapse
jamesclinton said:
1.Am from Germany
2.Yes you can use pc odin but if you want root on the fly then mobile odin is better
Click to expand...
Click to collapse
i want return to stock, so i don't want root..
if i use pc odin, i haven't to do a wipe right? beucase odin do it for me ..
Wipe and factory reset b4 flashing with pc odin
Andrew1998 said:
i want return to stock, so i don't want root..
if i use pc odin, i haven't to do a wipe right? beucase odin do it for me ..
Click to expand...
Click to collapse
All went well, i have also chosen not to wipe data partition and all my stuff is working fine. Kudos for this finding men!
Mobile odin is just perfect for this kind of operations. I have latest official stock firmware, rooted and all my apps and settings
are intact.
Sent from my GT-P5110 using Tapatalk 2
Has LAG this ROM??
I can´t notice any, but the best way to find out is to try it yourself
RoBy46 said:
Has LAG this ROM??
Click to expand...
Click to collapse
ROOT ODEX N900XXUCMJ6_N900SERCMJ3_N900XXUCMJ3
1 Download the firmware:
Download
2 Extract to any folder on your PC, get the firmware file ROS_N900XXUCMJ6_N900SERCMJ3_N900XXUCMJ3 and folder root_files
3 Folder root_files downloaded on the internal memory of the phone
4 Phone to the flashing mode and connect it to ODIN 3
5 In ODIN 3 is inserted in the PDA firmware ROS_N900XXUCMJ6_N900SERCMJ3_N900XXUCMJ3 and initialize it after Odin, click Start
6 Wait for the end of the firmware in ODIN 3, after turning on the phone check for ROOT, after we go to the File Manager and delete the folder root_files from the root of the internal memory, where it was placed before the firmware, it is no longer needed.
7 Use))
ROOT DEODEX N900XXUCMJ6_N900SERCMJ3_N900XXUCMJ3
1 Download the firmware:
Download
2 Phone to the flashing mode and connect it to ODIN 3
3 In ODIN 3 is inserted in the PDA firmware RDS_N900XXUCMJ6_N900SERCMJ3_N900XXUCMJ3_V6 and initialize it after Odin, click Start
4 Please, do the initial setup, entered the play market downloaded and installed SuperSu.-This is mandatory!
5 Use))
ROOT DEODEX N900XXUCMJ7_N900SERCMJ3_N900XXUCMJ3
Knox cut completely
DOWNLOAD
ROOT ODEX N900XXUCMJ7_N900SERCMJ3_N900XXUCMJ3
DOWNLOAD
1 Download the firmware.
2 Phone to the flashing mode and connect it to ODIN 3
3 In ODIN 3 is inserted in the PDA firmware *tar.md5 and initialize it after Odin, click Start
4 Please, do the initial setup, entered the play market downloaded and installed SuperSu.-This is mandatory!
5 Use))
ROOT_ODEX and DEODEX N900XXUCMJ7_INTERNATIONAL for ODIN3
BOOTLOADER
BOOTLOADER_N900XXUCMJ7
PDA
PDA_ROS_N900XXUCMJ7-ROOT_ODEX
PDA_RDS_N900XXUCMJ7-ROOT_DEODEX
PHONE
PHONE_N900DDUCMJ1
PHONE_N900DXUCMJ3
PHONE_N900XXUCMJ3
CSC
CSC_N900ODDCMJ2_INS
CSC_N900ODDCMJ2_INU
CSC_N900ODDCMJ2_TML
CSC_N900OLBCMJ3_THL
CSC_N900OLBCMJ3_XSE
CSC_N900OLBCMJ3_XSP
CSC_N900OLBCMJ3_XTC
CSC_N900OXECMJ1_CAC
CSC_N900OXECMJ1_SEK
CSC_N900OXECMJ1_SKZ
Example:
Model: SM-N900
Country: Bangladesh
Version: Android 4.3
Changelist: 2018955
Build date: Wed, 30 Oct 2013 07:43:33 +0000
Product Code: TML
PDA: N900XXUCMJ7
CSC_N900ODDCMJ2_TML
MODEM: N900DDUCMJ1
RDS_N900XXUCMJ7_N900ODDCMJ2_N900DDUCMJ1--ROOT_DEODEX
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
1 Download the firmware.
2 Phone to the flashing mode and connect it to ODIN 3
3 In ODIN 3 is inserted *tar.md5 and initialize it after Odin, click Start
4 Please, do the initial setup, entered the play market downloaded and installed SuperSu.-This is mandatory!
5 Use))
SER-N900XXUCMK2-ROOT-DEODEX-ODIN-3
Completely removed KNOX!!!
https://mega.co.nz/#!uwxWlbaB!Q_KsOhBnWPHR8oukuDfs3EDNu_49srPcidZHV-0_xiA
Special Thanks
Chainfire
A.S._id
I have downloaded 2nd one. Will try.
Sent from Note 3 (The beauty & beast)
Thanks. Its working fine.
Sent from Note 3 (The beauty & beast)
Hello, thanks for your effort. Is this pre-rooted rom. And how are binary, system and knox counters effects.
bartmans said:
Hello, thanks for your effort. Is this pre-rooted rom. And how are binary, system and knox counters effects.
Click to expand...
Click to collapse
CURRENT BINARY: Official
SYSTEM STATUS: Custom
VARRANTY BIT 1
Don't flash this people, this new update has the new warrant bit, kinda the same as the Knox counter for the Snapdragon version and will void your warranty if you root
Sent from my SM-N900 using xda app-developers app
*GalaxyDev* said:
Don't flash this people, this new update has the new warrant bit, kinda the same as the Knox counter for the Snapdragon version and will void your warranty if you root
Sent from my SM-N900 using xda app-developers app
Click to expand...
Click to collapse
If you have previously ROOT firmware will already be VARRANTY BIT 1. On any update.
Just now, the counter could see it was previously hidden.
And after flashing back to the version below will not return.
Firmware for Russia, as clearly seen in the version.
Return to the version below is not.
Since the stitching is a new bootloader.
Damn damn I wish I could have read before. Now I am woth watranty bit 1. F**k F**k sammy.
Sent from Note 3 (The beauty & beast)
sohebq said:
Damn damn I wish I could have read before. Now I am woth watranty bit 1. F**k F**k sammy.
Sent from Note 3 (The beauty & beast)
Click to expand...
Click to collapse
Here it is necessary to choose))) At any option of rooting of a guarantee today it is closed.
Wouldn't downgrading remove the warranty counter?
Sent from my SM-N900 using XDA Premium 4 mobile app
taz44410 said:
Wouldn't downgrading remove the warranty counter?
Sent from my SM-N900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
No man. I saw people crying on s4 exynos version.
Sent from Note 3 (The beauty & beast)
Guess it's a choice either warranty or root
Sent from my SM-N900 using XDA Premium 4 mobile app
taz44410 said:
Wouldn't downgrading remove the warranty counter?
Sent from my SM-N900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Fall isn't possible. Because of an insertion of a new butloader, I already wrote it above.
on note 2 it was possible to downgrade the bootloader so I thought why not on the 3
Sent from my SM-N900 using XDA Premium 4 mobile app
taz44410 said:
on note 2 it was possible to downgrade the bootloader so I thought why not on the 3
Sent from my SM-N900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
On another note 2 processor and other filesystem
We have a 4 pda.ru in the subject s4-9500
They write that they, too, came a new bootloader with the third paragraph.
And while rooting firmware to a remote KNOX
VARRANTY BIT 0
remote
system / app
ContainerAgent.apk
ContainerAgent.odex
KLMSAgent.apk
KLMSAgent.odex
KNOXAgent.apk
KNOXAgent.odex
KnoxAttestationAgent.apk
KnoxAttestationAgent.odex
KNOXStore.apk
KNOXStore.odex
KNOXStub.apk
system / conteiners / framework
there both files to delete.
Yes there was a new bootloader with the added line
Through the work of Dr ketan a method was devised to downgrade to 4.1.2 bootloader and still run 4.3
Sent from my SM-N900 using XDA Premium 4 mobile app
taz44410 said:
Yes there was a new bootloader with the added line
Through the work of Dr ketan a method was devised to downgrade to 4.1.2 bootloader and still run 4.3
Sent from my SM-N900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
In this version 4.3 does not work to yet.
4.3 In a lot of that has changed.
Blame SELinux translated into active mode.
Do not run many programs at the root and so on.
I made a kernel with disabled SELinux from source j1, and many programs are beginning to work .
J6 on until there is no source.
kernel no selinux N900XXUBMJ1
https://hotfile.com/dl/253342594/f6cfad7/Boot_2.tar.html
After the firmware to make WI-FI we correct line in the build.prop
so should look like:
ro.securestorage.support = false
alexyuh said:
In this version 4.3 does not work to yet.
4.3 In a lot of that has changed.
Blame SELinux translated into active mode.
Do not run many programs at the root and so on.
I made a kernel with disabled SELinux from source j1, and many programs are beginning to work .
J6 on until there is no source.
kernel no selinux N900XXUBMJ1
https://hotfile.com/dl/253342594/f6cfad7/Boot_2.tar.html
After the firmware to make WI-FI we correct line in the build.prop
so should look like:
ro.securestorage.support = false
Click to expand...
Click to collapse
Nice work on the kernel
Thanks for the share
Sent from my SM-N900 using XDA Premium 4 mobile app
Question
Flashing this J6 version, will wipe all data in my Note3?
Thanks!
:cyclops:
^^
I flashed twice. First time it didnt wipe but next time it did wipe.
Do bare in mind that it will bring knox counter too.
Sent from Note 3 (The beauty & beast)
good here I leave the extracted modem rom q BMC Canadian stock just went up. :good:
https://www.mediafire.com/?b171b10hh9849n9
Modem Telcel
https://www.mediafire.com/?2k6dkkh63clldxh
Dj Dedo
Still imposible to flash for me.
I will wait until Telcel releases 4.3 should be anytime soon.
If you know how to flash it share the method please.
Thank my friend!
Enviado desde mi SGH-I337M mediante Tapatalk
must have a stock 4.2.2 and flash with mobile odin
friends
tutorial instalacion
https://www.facebook.com/notes/gala...tutorial-instalación-modem-43/680446035310596
Maesedroid said:
Still imposible to flash for me.
I will wait until Telcel releases 4.3 should be anytime soon.
If you know how to flash it share the method please.
Thank my friend!
Enviado desde mi SGH-I337M mediante Tapatalk
Click to expand...
Click to collapse
This works for me:
-download bin
-rename bin file to modem.bin
-open mobile Oden
-select modem 2
-choose renamed modem file
-select flash
-it will reboot to download
-long press power button to reboot
-phone will install file
And you should be good.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SGH-I337M using Tapatalk 2
ragzdincs said:
This works for me:
-download bin
-rename bin file to modem.bin
-open mobile Oden
-select modem 2
-choose renamed modem file
-select flash
-it will reboot to download
-long press power button to reboot
-phone will install file
And you should be good.
Sent from my SGH-I337M using Tapatalk 2
Click to expand...
Click to collapse
I did that same process but the modem still untouched (4.2.2) or until i flash a 4.3 would be reflected? It says MG1 yet
Enviado desde mi SGH-I337M mediante Tapatalk
Maesedroid said:
I did that same process but the modem still untouched (4.2.2) or until i flash a 4.3 would be reflected? It says MG1 yet
Enviado desde mi SGH-I337M mediante Tapatalk
Click to expand...
Click to collapse
No, if it's not reflected, that means it didn't flash properly.
I used mobile odin following the instructions above, didn't flash properly either.
Instead, I used Odin on my PC, it flashed correctly this time.
Flash, reboot back into CWM or TWRP and flash 1 more time... dont use mobile, use standard ODIN 3.04
Felixpau86 said:
Flash, reboot back into CWM or TWRP and flash 1 more time... dont use mobile, use standard ODIN 3.04
Click to expand...
Click to collapse
Why not use mobile Oden, I use 3.85 pro and it works perfect. I have flashed the last 2 modem changes with it.
Sent from my SGH-I337M using Tapatalk 2
ragzdincs said:
Why not use mobile Oden, I use 3.85 pro and it works perfect. I have flashed the last 2 modem changes with it.
Sent from my SGH-I337M using Tapatalk 2
Click to expand...
Click to collapse
I might be using the free version and for some reason the pro wont install on my CM11... I didnt try a second time so I just went to odin 3.04 and did it that way. I would assume mobile odin should work but just didnt work for me for whatever reason
Hi
Is it the same modem for all sgh-i337m or it have different modem for bell ,rogers .......
zild8 said:
Hi
Is it the same modem for all sgh-i337m or it have different modem for bell ,rogers .......
Click to expand...
Click to collapse
I flashed the MK6 modem from the Bell ROM and I'm using Android 4.2.2, it's working fine for me, my carrier is Telcel in Mexico, I think it will work with all the carriers
Any noticeable benefits with the new modem?
WarbyParker said:
Any noticeable benefits with the new modem?
Click to expand...
Click to collapse
The data connection is more stable, switches flawlessly between 3G and LTE, signal doesn't get dropped when the modem switches the connection mode, LTE seems to be a little faster than before, and I don't know if it's a placebo effect, but the battery drain seems to be lower now.
Thanks
Just flash it into odin 3.07
had to flash 2 times,first times i was still on mg1,second work
What i did
-closed kies
-in odin put modem.bin in phone section and untick autoreboot
-turn off phone
-i remove battery dont know if that one is need
-put phone into download mode hold home+volume down+power and then vol up
-plug phone into pc
-flash in odin
WarbyParker said:
Any noticeable benefits with the new modem?
Click to expand...
Click to collapse
Aditional options for *#2263#
Might not have access to this with euro or American csc. Canadian csc allows more secret codes compared to rest.
Sent from my SGH-I337M
Tutorial
https://www.dropbox.com/s/g592rgewmh7kmk1/TUTORIAL MODEM 4.3 EN I337M VER. 2.pdf
Omega
The tutorial above is in Spanish... Perhaps you should let people know that.
Hey, running Omega 4.3 ROM
I am assuming I have to downgrade to 4.2.2 and then go back to 4.3 - anyone know if that's true?
I've been running omega up to a few days ago. Just use Odin and flash. Restart the phone and flash again. It should stick.
Sent from my SGH-I337M using Tapatalk
just a quick word of appreciation for the modem file. I flashed using Odin 3.09 -- you have to wait a while before you get the green all clear. Then flashed GE14 and avoided the possible issues with stock OTA. All is working well.
Hi guys,
Lately its been getting annoying seeing new threads pop up for every single variation of every single new firmware that gets released so instead of doing such, I ask that you post all firmwares in this thread to keep them in a central location.
From now, any new stock firmware threads created will be closed.
If any users would be interested in maintaining this thread by updating it as a list of firmwares so users don't have to trawl through the thread to find a specific firmware could they please contact me via PM to sort out the details
Thanks.
Jonny
Model: GT-I9505
Country: Open Europe
Version: Android 4.4.2
Changelist: 481100
Build date: Tue, 28 Jan 2014 22:02:19 +0000
Product Code: OXX
PDA: I9505XXUFNAD
CSC: I9505OXXFNA2
MODEM: I9505XXUFNAD
Download: Here - Terafile
Mirror: Google Drive
I got sometimes fc with settings! Anybody have that also?
Sent from my GT-I9505 using XDA Premium 4 mobile app
ChahidHamza said:
Model: GT-I9505
Country: Open Europe
Version: Android 4.4.2
Changelist: 481100
Build date: Tue, 28 Jan 2014 22:02:19 +0000
Product Code: OXX
PDA: I9505XXUFNAD
CSC: I9505OXXFNA2
MODEM: I9505XXUFNAD
Download: Here - Terafile
Click to expand...
Click to collapse
Mirror here:
https://mega.co.nz/#!ExQUyACR!WdK7udWQvQvaIvHHrxjAn2RQ6qkL73eSaF8SKDcnsiQ
dajumper said:
I got sometimes fc with settings! Anybody have that also?
Sent from my GT-I9505 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
If you experience FC,
- Boot into recovery mode (Home+power+vol up)
- Choose to wipe/factory reset.
kamrul.auntu said:
If you experience FC,
- Boot into recovery mode (Home+power+vol up)
- Choose to wipe/factory reset.
Click to expand...
Click to collapse
I've just flashed this ROM and getting repeated 'Samsung Keyboard' FC's. Wiped / Factory Reset / Cleared Cache / Re-flashed tna.
Making it impossible to even get through the initial set up as can't type into anything to set up accounts...
Any ideas?
Cheers
Paul
I flashed this rom and wipe all data but seems keep xxufna5 version .
Any ideas
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Enviado do meu GT-I9505 utilizando Tapatalk 4
Does anyone have only the bootloader file from I9505XXUFNAD??
thanks.
mhdsanto85 said:
Does anyone have only the bootloader file from I9505XXUFNAD??
thanks.
Click to expand...
Click to collapse
It's included in the Zip file...
https://mega.co.nz/#!ExQUyACR!WdK7ud...3eSaF8SKDcnsiQ
paulrgod said:
It's included in the Zip file...
https://mega.co.nz/#!ExQUyACR!WdK7ud...3eSaF8SKDcnsiQ
Click to expand...
Click to collapse
Thanks, but I am in mobile internet and I don't want to download 1.5 GB just to extract the bootloader file....
Sent from my GT-I9505G using Tapatalk
mhdsanto85 said:
Thanks, but I am in mobile internet and I don't want to download 1.5 GB just to extract the bootloader file....
Sent from my GT-I9505G using Tapatalk
Click to expand...
Click to collapse
I see - here you go!
pankeca said:
I flashed this rom and wipe all data but seems keep xxufna5 version .
Any ideas
Enviado do meu GT-I9505 utilizando Tapatalk 4
Click to expand...
Click to collapse
Did you flash it correctly? Mine seems to be working fine up to now. *see attached pic.
Maybe try flashing again if it didn't work?
Hope it works out for you buddy
On German Forum (handy-faq.de) 2 users report, that they have after flashing this firmware again KNOX 0x0...
someone can confirm this?
For the T-Mobile USA variant, can we just flash the PDA and CSC without the modem?
Sent from my SGH-M919 using Tapatalk
Lochman79 said:
For the T-Mobile USA variant, can we just flash the PDA and CSC without the modem?
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
I am very interested in knowing this as well!
If I was on FNA5, will flashing this wipe my data ?
Is this stable as FNA5 ?
Sent from my GT-N5100 using Tapatalk
u058515 said:
If I was on FNA5, will flashing this wipe my data ?
Is this stable as FNA5 ?
Sent from my GT-N5100 using Tapatalk
Click to expand...
Click to collapse
1. Yes
2. Check the thread from here
3. Stop posting your issue here instead post it in a right thread. thank you.
Schabadaba said:
On German Forum (handy-faq.de) 2 users report, that they have after flashing this firmware again KNOX 0x0...
someone can confirm this?
Click to expand...
Click to collapse
Lucky guys or fake, here the status 0x1 keeps 0x1
Enviado do meu GT-I9505 utilizando Tapatalk 4
My knox is still 0x1, did anyone try cm or omni with this bl and modem?