Just wanted to let you know that JellyBean 4.3 is finally available for the i9506 with Telekom branding. I have not received any notification but when you manually perform a software update check in your device settings the ~720MB download will start.
For all of you who want to flash it via odin etc. here is the download link:
http://terafile.co/855f236c6852/I9506XXUBNA2_I9506DTMBNA1_DTM.zip
Here is some additional info I forgot to post:
Product Code: DTM
PDA: I9506XXUBNA2
CSC: I9506DTMBNA1
MODEM: I9506XXUBML2
Related
I am having problem updating my firmware.
I bought my N8000 from Saudi, and have been using Germany jelly beans ROM until today. I decided to flash the UAE stock ICS firmware back and upgrade it to jellybean.
After flashing the stock rom by Odin, I clicked "software update" in the settings and it asked me to select my country. I chose Japan, where I live and it registered the device then said no software update available.
After this, I connected the Note to Kies via USB and it showed "your device's current firmware is not supported to update firmware ...".
Could anybody please tell me has the Saudi note 10.1 received 4.1.2 update yet? Is my country selection incorrect?
Here is my current device firmware and CSC information.
AP: N8000XWALG7
CP: N8000XXLGA
CSC: N8000OJVALG4
Thank you in advance for your kind help.
Hi, I have an unbranded P5100 (wifi + 3G) bought in Australia. I need to reset to stock firmware which is unfortunately still 4.0.3 here in Australia.
Now I went onto sammobile and entered my model number, country and chose XSA.
It comes up with:
Model: GT-P5100
Country: Australia
Version: Android 4.0.4
Product Code: XSA
PDA: P5100XWALE3
CSC: P5100XSAALE1
MODEM: P5100XXLD7
All this data is correct except for the Android version. My tablet came with 4.0.3 and not 4.0.4.
Anyway, I downloaded the file, but when opening it, I can't find the modem file at all. It only has the MD5 file. So how do I go about unrooting and bringing it back to stock again without having the modem file?
Any tips would be greatly appreciated
History:
Lollipop upgrade is rolled out just for USA T-Mobile users ( N915TUVU1ANK3 and N915TUVU1ANJL). I have a N915T (T-Mobile) but base band is different from USA users ( it's Trinidad and Tobago N915TUBU1AOA2). I'm trying to upgrade to lollipop by downloading the firmware which is released for USA and Odin. I also wan to root the Lolli after that.
General Questions regarding Odin :
Q1: If I upgrade 4.4.4 to 5.0.1 by Odin successfully, what will I lost ? Aps, Aps settings, Internal SD Data, contacts ....
Q2: if it's unsuccessful can I do a reset factory to turn back to my previous Android ?
My phone:
I installed: play.google<>.com/store/apps/details?id=org.vndnguyen.phoneinfo&hl=en
>> and found out that my phone is
Basdband: N915TUBU1AOA2
Original CSC: TMB
Firmware CSC: TTT
Active CSC: TMB/TTT
CSC ver: N915TUUB1AOA2
TTT= Trinidad and Tobago T-Mobile
....
Q3: Now can I use Odin and TMB BOD7 flash to go to lollipop ?
covarac.galaxC said:
History:
Lollipop upgrade is rolled out just for USA T-Mobile users ( N915TUVU1ANK3 and N915TUVU1ANJL). I have a N915T (T-Mobile) but base band is different from USA users ( it's Trinidad and Tobago N915TUBU1AOA2). I'm trying to upgrade to lollipop by downloading the firmware which is released for USA and Odin. I also wan to root the Lolli after that.
General Questions regarding Odin :
Q1: If I upgrade 4.4.4 to 5.0.1 by Odin successfully, what will I lost ? Aps, Aps settings, Internal SD Data, contacts ....
Q2: if it's unsuccessful can I do a reset factory to turn back to my previous Android ?
My phone:
I installed: play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo&hl=en
>> and found out that my phone is
Basdband: N915TUBU1AOA2
Original CSC: TMB
Firmware CSC: TTT
Active CSC: TMB/TTT
CSC ver: N915TUUB1AOA2
TTT= Trinidad and Tobago T-Mobile
....
Q3: Now can I use Odin and TMB BOD7 flash to go to lollipop ?
Click to expand...
Click to collapse
Hi,
1. You'll lost all your data on internal storage, applications installed, and configurations that you have done. So do backup before upgrading with ODIN.
2. You can't. Since the phone will brick. Flash the correct firmware again should work.
3. You shouldn't. The best way is to wait for the update roll up for your TTT Note Edge (because USA T-Mobile is different than TTT). Since some of the devices are carrier/bootloader locked.
Sorry, too many edits.
Dear All,
I am not getting 5.1.1 firmware update for my Galaxy S6. After getting this phone, I only get one one update via smart switch. But that time update was not showing in phone OTA. But in smart switch update was available.
Now I am seeing in sammobile, 5.1.1 is available for couple of regions. But I am not getting 5.1.1 update via phone software update or via smart switch.
So, can somebody please let me know which 5.1.1 FW will be appropriate for my device?
According to Phone INFO apps,
My phone details are:
Product code: SM-G920FZDAXME
Original CSC: XME
Bootloader: G920FXXU1AOE3
Baseband: G920FXXU1AOE3
PDA: G920FXXU1AOE3
CSC: G920FOLB1AODR
kamrul.auntu said:
Dear All,
I am not getting 5.1.1 firmware update for my Galaxy S6. After getting this phone, I only get one one update via smart switch. But that time update was not showing in phone OTA. But in smart switch update was available.
Now I am seeing in sammobile, 5.1.1 is available for couple of regions. But I am not getting 5.1.1 update via phone software update or via smart switch.
So, can somebody please let me know which 5.1.1 FW will be appropriate for my device?
According to Phone INFO apps,
My phone details are:
Product code: SM-G920FZDAXME
Original CSC: XME
Bootloader: G920FXXU1AOE3
Baseband: G920FXXU1AOE3
PDA: G920FXXU1AOE3
CSC: G920FOLB1AODR
Click to expand...
Click to collapse
The SM-G920F version. Whatever country you prefer.
Faspaiso said:
The SM-G920F version. Whatever country you prefer.
Click to expand...
Click to collapse
if I even flash my native XME - 5.1.1 , will it allow me to get the OTA update via Phone software update ?
kamrul.auntu said:
Dear All,
I am not getting 5.1.1 firmware update for my Galaxy S6. After getting this phone, I only get one one update via smart switch. But that time update was not showing in phone OTA. But in smart switch update was available.
Now I am seeing in sammobile, 5.1.1 is available for couple of regions. But I am not getting 5.1.1 update via phone software update or via smart switch.
So, can somebody please let me know which 5.1.1 FW will be appropriate for my device?
According to Phone INFO apps,
My phone details are:
Product code: SM-G920FZDAXME
Original CSC: XME
Bootloader: G920FXXU1AOE3
Baseband: G920FXXU1AOE3
PDA: G920FXXU1AOE3
CSC: G920FOLB1AODR
Click to expand...
Click to collapse
its easier than you think.
- change csc via dialer. if this doesnt work root your device via PingPong and change csc via root.
- look a country that 5.1.1 has arrived.
THE END.
Why do i need CSC where i have same CSC 5.1.1 firmware.....
Here you go stock 5.1.1 Malaysian ROM (XME). Flash via odin.
http://www.sammobile.com/firmwares/download/49468/G920FXXU2BOFO_G920FOLB2BOFF_XME/
Finally OTA available last day. 660MB update. It's now 5.1.1
AT&T Stock S8 G950USQU2CRC5 Odin Files
Model: SM-G950U
Model Name: Galaxy S8
Country: (USA)
Version: Android 8.0 Oreo
Security Patch Level: March 1st, 2018
Product Code: ATT
PDA: G950USQU2CRC5
CSC: G950UOYN2CRC5
Download here: G950USQU2CRC5
DOWNLOAD for ODIN:
ODIN v3.13.1
Click Here For S8+
My wife has a S8 unlocked SM-950U I followed the carrier switching instructions here https://forum.xda-developers.com/galaxy-s8/how-to/snap-guide-flashing-standard-fw-carrier-t3625817 to load ATT firmware in the hope of getting carrier features like wi-fi calling, video calling etc. to work. In sort none of those features work and now she is not getting any OTA updates and still on security patch level from july 2017
1. Can i flash this over the current firmware NRD90M.G950USQS1AQF7 service provider says ATT/ATT/XAA
2. Will it flash a non-carrier version or att branded version we have att sim?
3. will she get OTA updates after this?
4. will user data be erased?
Thank you in advance for your help.