A device fails to boot (Bootloop) after it was flashed a 4.3 rom (not sure which) via TWRP custom recovery (a device bootloader is unlocked). At this moment, for some reasons, TWRP is not working (just shows a TWRP splash screen and then goes dark). Thus, I could not use a recovery to flash a rom again. Now, I need a rom (either stock or non-stock) in form of .zip or .img that can be flash in fastboot mode (at least it is the only mode that is working) to revive a phone back. Thank you in advance.
Edited : My device is x920d dlxub1
GoLfWRC said:
A device fails to boot (Bootloop) after it was flashed a 4.3 rom (not sure which) via TWRP custom recovery (a device bootloader is unlocked). At this moment, for some reasons, TWRP is not working (just shows a TWRP splash screen and then goes dark). Thus, I could not use a recovery to flash a rom again. Now, I need a rom (either stock or non-stock) in form of .zip or .img that can be flash in fastboot mode (at least it is the only mode that is working) to revive a phone back. Thank you in advance.
Click to expand...
Click to collapse
Try this
http://forum.xda-developers.com/showthread.php?t=2630214
Thanks davidjumani, I will try and let you know the result. Cheers.
Non-successful. Anyone more ?
Have you try reflash TWRP for x920d?
Sent from my HTC Butterfly using Tapatalk
GoLfWRC said:
Non-successful. Anyone more ?
Click to expand...
Click to collapse
same with me
try this
openrecovery-twrp-2.7.0.1-dlxu.img
download from official twrp website
working for me
You can try with the modified CMW 6.0.4.7 by Kairi in HTC Butterly Original Android Development
Related
Hi i need a help.
i got unlock my bootloader using HTCDEV (got HBOOT 2.00.0002), but still S-ON.
Then i should install pre-rooted ROM (example CM7.1).
Can you please give me tutorial how to do it ? I find only tutorials for S-OFF devices. Thanks !
qpkqkma said:
Hi i need a help.
i got unlock my bootloader using HTCDEV (got HBOOT 2.00.0002), but still S-ON.
Then i should install pre-rooted ROM (example CM7.1).
Can you please give me tutorial how to do it ? I find only tutorials for S-OFF devices. Thanks !
Click to expand...
Click to collapse
have a look here
http://forum.xda-developers.com/showthread.php?t=794638
after flashing a recovery, you can flash ROM's
this link is good to
it has Index for everything related to Desire
http://forum.xda-developers.com/showthread.php?t=809328
you will need it to download a recovery like RA amon, or clockmode work ...
good luck
What kind of recovery i should install ? I wanna install 4EXT Recovery, i install that app in phone, but app is still stop working...
What should i do ?
OK, i flash ClockworkMod Recovery v5.0.2.0
use guide on wiki.cyanogenmod .com
VIA recovery, after flashing cyanogenmod, i select reboot , after reboot, i stuck on HTC logo. So i get of battery, boot into HBOOT, recovery, i load my recovery, works fine. What should i do now ? I want cyanogenmod.
qpkqkma said:
OK, i flash ClockworkMod Recovery v5.0.2.0
use guide on wiki.cyanogenmod .com
VIA recovery, after flashing cyanogenmod, i select reboot , after reboot, i stuck on HTC logo. So i get of battery, boot into HBOOT, recovery, i load my recovery, works fine. What should i do now ? I want cyanogenmod.
Click to expand...
Click to collapse
With, htcdev unlock you have to flash the kernel with fastboot, it can't be made with recovery unfortunately.
Just copy the boot.img of the cyanogen zip you downloaded flash the ROM from recovery and after that flash the boot.img with fastboot.
Swyped from my Desire S
Ok, i put the boot.iso from cm_saga_full-59.zip to root of sdcard, flash recovery, and i put in fastboot menu, connect cable, run cmd, get to android folder where i have adb, fastboot etc etc etc..
can you tell me a command that i should use ? Thanks
problem now, i load a recovery with boot.iso on sdcard, and after sucess loading i restart device, and afer 30 second on htc logo restart and boot automaticly in Clockmod...WTF ???
I'm stuck inn boot loop on my note 10.1 because of LCD density modder.
I have done a full factory reset without any result and i am unable to access any file on the device. But i can get into odin/download mode and recovery.
i do not have CMW installed and the device in NOT debugged
Can anyone help me or is it bricked?
zacreor said:
I'm stuck inn boot loop on my note 10.1 because of LCD density modder.
I have done a full factory reset without any result and i am unable to access any file on the device. But i can get into odin/download mode and recovery.
i do not have CMW installed and the device in NOT debugged
Can anyone help me or is it bricked?
Click to expand...
Click to collapse
It sounds like you're going to have to re-flash stock or some other ROM. Use the toolkit (in another post in our forums) and flash TWRP recovery and then flash whatever ROM you want.
Also....do a backup in TWRP after everything is working. Most important thing you'll ever do as it will save you from having to do this kind of thing again.
I would flash a recovery Philz or TWRP boot to recovery format sdcard system data cache and preload .
Phone empty flash stock rom via Odin
seedoubleyou said:
It sounds like you're going to have to re-flash stock or some other ROM. Use the toolkit (in another post in our forums) and flash TWRP recovery and then flash whatever ROM you want.
Also....do a backup in TWRP after everything is working. Most important thing you'll ever do as it will save you from having to do this kind of thing again.
Click to expand...
Click to collapse
and how do i do this when my device is not debugged?
zacreor said:
and how do i do this when my device is not debugged?
Click to expand...
Click to collapse
If you can get into recovery mode - holding power+volume down , then pressing volume up to get into download mode , if so, flash a stock rom through odin & you will be good to go.
Did it :victory: Thank you soo much!!
zacreor said:
and how do i do this when my device is not debugged?[/QUOTE
Not required is why .
Click to expand...
Click to collapse
I use HTC One S c2
I already
-unlock bootloading.
-root by super boot.
-install GooManager and install openrecoveryscript.
after reboot it had red ! and boot in home.
I try to fixed by Flash other recovery. ... after reboot again it Struck in Recovery page and can't boot in home but still open in fastboot page.
:crying::crying::crying:
pls Help me find the way out.
hio122 said:
I use HTC One S c2
I already
-unlock bootloading.
-root by super boot.
-install GooManager and install openrecoveryscript.
after reboot it had red ! and boot in home.
I try to fixed by Flash other recovery. ... after reboot again it Struck in Recovery page and can't boot in home but still open in fastboot page.
:crying::crying::crying:
pls Help me find the way out.
Click to expand...
Click to collapse
Whats your HBOOT version? Which recovery version do you use? Are you using a stock rom? Have you tried flashing a custom recovery via fastboot instead of "on the fly" ?
LS.xD said:
Whats your HBOOT version? Which recovery version do you use? Are you using a stock rom? Have you tried flashing a custom recovery via fastboot instead of "on the fly" ?
Click to expand...
Click to collapse
HBOOT 3.01.0000
recovery is TWRP 2.6.3.0 villec2
I didn't use stock rom
and I flashing via fastboot but it can't boot.
hio122 said:
HBOOT 3.01.0000
recovery is TWRP 2.6.3.0 villec2
I didn't use stock rom
and I flashing via fastboot but it can't boot.
Click to expand...
Click to collapse
Which rom is actually installed?
It's Work. I re-locked and re-start the process.:victory:
Hi,
My wife just got a new phone and gave up her old XT925 so I thought I would try to put CM or SlimKat on it and let my daughter play around with it. But I'm having trouble putting a custom recovery on it. I've unlocked the bootloader. I've used fastboot to write the recovery image...but when I try to reboot directly into recovery so the binary update can complete, it pauses for a couple of minutes and then reboots the OS normally. If I try entering reovery after that, I end up with the dead android with a red exclamation point in him and "no command" written below.
The phone currently has 4.4.2 and System 181.46.3.XT925.RCI.en.CA. Am I out of luck with this device and stuck on 4.4.2?
Thanks!
What recovery did you try to flash ?
Use this one, it worked for me :
http://forum.xda-developers.com/showthread.php?t=2747535
Thanks. That one worked. I wonder why I had trouble with twrp.
Orionbell37 said:
What recovery did you try to flash ?
Use this one, it worked for me :
http://forum.xda-developers.com/showthread.php?t=2747535
Click to expand...
Click to collapse
pls update the link pls
Pausky said:
pls update the link pls
Click to expand...
Click to collapse
Its because you need to rename the stock recovery to .bak at the end of the file name. The stock recovery is getting in the way of you rebooting to TWRP or what ever custom recovery you are trying to use.
If you cant figure out how to do that or don't know where in system the stock recovery is just hit me up and ill give you the path to the file. After you rename the file just go back into fastboot and reflash the custom recovery and you should be able to reboot into TWRP or what ever custom recovery you want.
My phone works great with official CM13 and I just wanted to flash a new boot logo to get rid of the "warning logo", but I can't enter TWRP. I shut down my phone, enter the bootloader, click on "recovery" but then the screen becomes black and the phone is off. I reflashed the recovery, but nothing changed.
Try latest TWRP (2.8.7.0)!
Flash another TWRP version
Which version do I need? I don't have a GPE, but I have a CM13 Custom Rom installed. Or should I take the Stock Img No theme?
twrp-2.8.7.0.-falcon_GPE.img - 9.8 Mo (AFH Mirror)
twrp-2.8.7.0.-falcon_GPE_NOTHEME.img - 9.2 Mo (AFH Mirror)
twrp-2.8.7.0.-falcon_STOCK.img - 9.8 Mo (AFH Mirror)
twrp-2.8.7.0.-falcon_STOCK_NOTHEME.img - 9.2 Mo (AFH Mirror)
On the official twrp site, there is no 2.8.7.0. There is just 2.8.6.0, but I have already instaleld it.
PureChris said:
Which version do I need? I don't have a GPE, but I have a CM13 Custom Rom installed. Or should I take the Stock Img No theme?
twrp-2.8.7.0.-falcon_GPE.img - 9.8 Mo (AFH Mirror)
twrp-2.8.7.0.-falcon_GPE_NOTHEME.img - 9.2 Mo (AFH Mirror)
twrp-2.8.7.0.-falcon_STOCK.img - 9.8 Mo (AFH Mirror)
twrp-2.8.7.0.-falcon_STOCK_NOTHEME.img - 9.2 Mo (AFH Mirror)
On the official twrp site, there is no 2.8.7.0. There is just 2.8.6.0, but I have already instaleld it.
Click to expand...
Click to collapse
Use TWRP from there: http://forum.xda-developers.com/moto-g/development/recovery-twrp-2-8-2-0-touch-recovery-t2980621 and one of the STOCK versions!
Doesn't work either
PureChris said:
Doesn't work either
Click to expand...
Click to collapse
What exactly? Reflashing TWRP?
Andus1988 said:
What exactly? Reflashing TWRP?
Click to expand...
Click to collapse
Flashing the latest TWRP Recovery (2.8.7.0).
PureChris said:
Flashing the latest TWRP Recovery (2.8.7.0).
Click to expand...
Click to collapse
And what's the error message ?
Give as much info as you have so we don't waste time on asking you basic questions ....
IGGYVIP said:
And what's the error message ?
Give as much info as you have so we don't waste time on asking you basic questions ....
Click to expand...
Click to collapse
Sry, I wrote it wrong. The flashing worked without an error, but it is still not possible for me to enter the recovery. No changes from 2.8.6.0 to 2.8.7.0.
I enter bootloader, press recovery, but the phone just shuts down. Booting to system is normally working and I can use my phone like always. I just can't enter the recovery.
PureChris said:
Sry, I wrote it wrong. The flashing worked without an error, but it is still not possible for me to enter the recovery. No changes from 2.8.6.0 to 2.8.7.0.
I enter bootloader, press recovery, but the phone just shuts down. Booting to system is normally working and I can use my phone like always. I just can't enter the recovery.
Click to expand...
Click to collapse
When you have exited recover for first time did you tick disable recovery flash ?
IGGYVIP said:
When you have exited recover for first time did you tick disable recovery flash ?
Click to expand...
Click to collapse
No I don't think so. Should I try any wipes that don't erase my system like chache and dalvik. Or should I flash CWM to try if that works?
Edit: I can enter the recovery with "adb reboot recovery" and it works fine. Even the "flackering line" is gone , but I think that is because of the latest twrp update. What shall I do now to get recovery access from bootloader?
PureChris said:
No I don't think so. Should I try any wipes that don't erase my system like chache and dalvik. Or should I flash CWM to try if that works?
Edit: I can enter the recovery with "adb reboot recovery" and it works fine. Even the "flackering line" is gone , but I think that is because of the latest twrp update. What shall I do now to get recovery access from bootloader?
Click to expand...
Click to collapse
Hmhhh very odd
Step one is make full backup in twrp also backup the SD card so you can wipe the phone clean
I would try to use moto g aio tool from xda and return the phone to full stock
And then download the latest recovery IMG from the link the dude gave you earlier and flash it using the aio tool (there you can remove the warning boot IMG safely too
Then push your files back and try to restore (skip cache and dalvik)
Report back and Good luck
The backup is essential since you can access recovery
Thx for your advices. I think the problem appeared first after one of the latest cm13 nightlies. I now install the latest from today and maybe it works. I don't know if the ROM can cause problems with the recovery, but maybe.
Then I will follow your steps.
I flashed the stock rom through fastboot. Then I flashed latest twrp + fix boot logo => still the same problem (phone shuts down when pressing "recovery mode". But there is a new problem now:
I can not enter the recovery through adb anymore. I type "adb reboot recovery" -> phone reboots -> 4 sec black screen -> "no command" with the android on the ground.
I got no error while flashing the recovery except the standard error (mismatched partition size recovery).
OH MY GOD.
I have never been such a retard...
In the bootloader I pressed the power button to confirm instead of the volume up button. oh damn.
I became used to the power button as the confirm button. I'm so clumsy in the last time, also with my motorcycle. I destroyed the electric a bit, because I connected two wrong cables...
Edit:
Flashed again to the stock rom for the 2nd time. Now everything is working for now.