Database Info

[Q] Ill pay for Help!

plz help me i have emergency calls only for GSM service i've tried everything i can think of....ill pay you if u help fix this problem

JGAGNON10 said:
plz help me i have emergency calls only for GSM service i've tried everything i can think of....ill pay you if u help fix this problem
Click to expand...
Click to collapse
Could be alot off things. A issue with the sim card to not being carrier permited. Could also have being blacklisted by a carrier .

bought a new sim card no dice....also the phone worked prior to this for like a month how would it get black listed....this happened immediatley after i hit gsm only by accident in phone settings

I have a solution!
Edit: I noticed you started at least three separate threads with different bits of information... Not very good forum etiquette.
I haven't spent time to research this, does your MTS SIM card allow 2G roaming on Rogers? Or only 3G?
I can reproduce the problem, I am running CM7 on a 9020A, with the XXKB3 radio, on the Bell/Telus joint HSPA network, which does not have a 2G GSM network.
On the 9020A: toggling 3G back on, then reflashing an appropriate UCKB2 or UCKD1 radio should fix this. (Either through fastboot or with CWM and the appropriate zip radio files.) You can then reflash the 9020T uncapped XXKB1, XXKB3 or XXKD1 radios afterwards if you wish.
Hope the above helped,
Darkshado

ok im on the same model but in manitoba on mts ill try these radios tho thanks for the input ill let u know how it went

well i just tried uckd1 and nothing...about to try uckb2

attempted to write uckb2 but it said failed and i don't wanna try that again i briked a phone like that once.... so still emergency only calls and im on uckd1

ok! we have progress but not all the way there yet...i can now find the MTS network with uckd1 but when i click on it...it says unable to conect at this time....when i hit select automatically it says registered on network. This has not fixxed the problem just yet tho...any other suggestions?

yes my bad about multiple threads....anyone have the unable to connect problem before?

[Q] Reversing Gingerbread Baseband Flash or Correct Baseband for my Provider

Good Morning,
After flashing the Gingerbread Baseband I no longer am able to register on the network for my provider.
The device is from Rogers but unlocked and being used on the Bell network.
After flashing I realized there may be a different baseband for me to use in Canada (just North of Toronto).
I require some help in locating a Gingerbread baseband that would work or provide me with instructions on how to return to the original baseband.
Any help is appreciated!
Thank you kindly,
- Audi2Audi

Did you set the APN manually? You have to do that.

Hello!
APN in Menu|Settings|Wireless & Networks|Mobile Networks|Access Point Names ?
I have set that to: pda.bell.ca
Is there other steps required though?
Thank you for the response!

apn settings is for internet. phone must tower of sim. may be flashing baseband again will soveit because i am tower getting for my country

If you're wanting to go back to stock froyo first you need to visit here to get your original rom... these will also flash the baseband back too
http://forum.xda-developers.com/showthread.php?t=1246678
or here http://forum.xda-developers.com/showthread.php?t=1155874
then you will need to follow this turtorial in order to flash the stock rom back on (go down to second post that one is in English )
http://forum.xda-developers.com/showthread.php?t=1244490
Although it is a possibility that the BB hasn't flashed correctly, might be worth trying it again... might also be worth trying a froyo rom to see if you get a signal then, because if you do you still have the froyo baseband on...

Simplier to flash stock baseband using kdz tutorial in my signature.
Edit:
But i'm not sure if rogers has the same firmware

adixtra said:
Simplier to flash stock baseband using kdz tutorial in my signature.
Edit:
But i'm not sure if rogers has the same firmware
Click to expand...
Click to collapse
Thanks adixtra i always forget about the tutorial of yours

You can flash a .Bin File for Your P920 or P920H.

Ok, now this is getting bizarre hah.
I reflashed the baseband again and everything went normal as it did before.
This time I searched for networks and selected my provider. After about 5 minutes of the device trying to register on the network an error was received that said it was unable to register on this network.
However, when I got to my home screen I was registered on the network. I tested a voice call and it worked. I have tested data as well.
BUT! This is where it gets even more bizarre...The device cycles from 4 signal bars to 2 signal bars to none to 3G (from H) followed by not being registered on the network. Then a few minutes later (sometimes only after a reboot) it returns to 4 bars and begins the cycle again.
Has anyone seen anything like this before?
Thank you again for your help!

Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums and Read THIS
Moving to General

Yes i have seen this with my install of the baseband file but it will not let me register the 3g or 3g+ let keeps me on full with gsm only its why i flashed mine back using the lg update tool software i put it right back to stock using similar way you flashed the baseband file. PS im on rogers as well

teray0n said:
Yes i have seen this with my install of the baseband file but it will not let me register the 3g or 3g+ let keeps me on full with gsm only its why i flashed mine back using the lg update tool software i put it right back to stock using similar way you flashed the baseband file. PS im on rogers as well
Click to expand...
Click to collapse
Good Evening,
Would you be able to upload the KDZ file from your update?
I am having problems with the LG Phone Recovery indicating that I have the most up to date software and halting the recovery process.
Thank you!
- Audi2Audi

Hello,
I flashed an earlier KDZ which allowed me to use the LG Update tool to restore my stock rom.
Thank you everyone for your help and advice.
- Audi2Audi.

it will tell you that but if you use recovery mode and it will download the file then you will have to unplug the phone from usb hold vol+ power then plug it back into the usb and it should download. like i said i used similiar method to flashing baseband

On my windows 7 not detect omap 4 and i can't flash baseband,what can i do?

[Q] Lost 4G after flashing another Stock

Hello guys.
I have a xperia Z3 from VIVO and flashed a rom from OI, everything went well on flashing the rom but after it finished i noticed that i lost my 4G. When i search for network there have a TIM BRASIL LTE but it won't let me register on it.
Do anyone know how to solve that?
Thanks!

Input the correct apn settings from your carrier

LitoNi said:
Input the correct apn settings from your carrier
Click to expand...
Click to collapse
Lito, do you think that would help?
Because the problem is that I am not able to register to the LTE network, it's not related to the ability of using internet.
Actually, this is exactly what happens, after i flash the firmware i have 4G but after a few minutes (Between 5 and 10 minutes) i completelly lose connection to the LTE network, even if it's available in the networks list.

Info
DiegoManBR said:
Lito, do you think that would help?
Because the problem is that I am not able to register to the LTE network, it's not related to the ability of using internet.
Actually, this is exactly what happens, after i flash the firmware i have 4G but after a few minutes (Between 5 and 10 minutes) i completelly lose connection to the LTE network, even if it's available in the networks list.
Click to expand...
Click to collapse
just test firmware of another region
(UK firmware for example)
:good:

DiegoManBR said:
Lito, do you think that would help?
Because the problem is that I am not able to register to the LTE network, it's not related to the ability of using internet.
Actually, this is exactly what happens, after i flash the firmware i have 4G but after a few minutes (Between 5 and 10 minutes) i completelly lose connection to the LTE network, even if it's available in the networks list.
Click to expand...
Click to collapse
Maybe if you explained a bit better that would?
Like mentioned before this post, try to flash only the baseband from another region, hopefully that will solve it.

Geeks Empire said:
just test firmware of another region
(UK firmware for example)
:good:
Click to expand...
Click to collapse
Geeks, there have no other region for my version of the Z3, also i am trying to flash many other rooms from my region and all of them results in a error during the flash... Blank error, no description.

LitoNi said:
Maybe if you explained a bit better that would?
Like mentioned before this post, try to flash only the baseband from another region, hopefully that will solve it.
Click to expand...
Click to collapse
Lito, thanks for the sugestion, i flashed the baseband for the Customized PT and after flash i got the 4G signal for about 30 minutes, but when i rebooted the phone, i completelly lost 4G again, and now in the network lists there is no LTE from TIM. Could it be because i installed an european baseband on a mobile here in brazil?
Thanks agian.

DiegoManBR said:
Lito, thanks for the sugestion, i flashed the baseband for the Customized PT and after flash i got the 4G signal for about 30 minutes, but when i rebooted the phone, i completelly lost 4G again, and now in the network lists there is no LTE from TIM. Could it be because i installed an european baseband on a mobile here in brazil?
Thanks agian.
Click to expand...
Click to collapse
thats weird... are you sure you have the correct APN settings inputted? Also, i would assume youve tried flashing the VIVO's baseband or any other USA roms?
Try the following if you have already done all those: go to dial pad and input *#*#4636#*#* > phone info > menu top right > select radio band > try Australia or USA or what ever pops up > scroll down and make sure LTE/GSM auto is selected or try out the other ones > scroll back up and hit the "run ping test"
if all these doesnt work, i would advise you to go back to the original rom.
just curious, which model number is your Z3?

LitoNi said:
thats weird... are you sure you have the correct APN settings inputted? Also, i would assume youve tried flashing the VIVO's baseband or any other USA roms?
Try the following if you have already done all those: go to dial pad and input *#*#4636#*#* > phone info > menu top right > select radio band > try Australia or USA or what ever pops up > scroll down and make sure LTE/GSM auto is selected or try out the other ones > scroll back up and hit the "run ping test"
if all these doesnt work, i would advise you to go back to the original rom.
just curious, which model number is your Z3?
Click to expand...
Click to collapse
Lito, now i will complicate a little bit more then. First, the model number of my mobile is D6646 from Brazil with DTV.
Also, i tried to flash the Vivo Baseband and it was worse, i did not install any baseband from USA, just from Portugal.
I tried that on the keyboard, but when i chose USA band i just can't even register on any TIM network.
Also, i tried to flash the original rom, but i can't flash any other firmware apart from Oi. I get a blank error line on flashtool for every other rom i tried to install, so it's even worse
Feel the challenge.
Thanks again for all your help.

flash back to the original ROM if you can, also, how did you flash to the new rom? through recovery or Flashtool? if you see a blank space or what ever, you might not have the correct drivers installed on your computer, especially if youre running Windows 8.
that being said, i dont see D6646 in Xperifirm, i cant tell you what to flash and what not to flash. Without that, i wouldnt advise you to flash anything but the original rom that it came with, you dont want to soft/hard brick the device.

LitoNi said:
flash back to the original ROM if you can, also, how did you flash to the new rom? through recovery or Flashtool? if you see a blank space or what ever, you might not have the correct drivers installed on your computer, especially if youre running Windows 8.
that being said, i dont see D6646 in Xperifirm, i cant tell you what to flash and what not to flash. Without that, i wouldnt advise you to flash anything but the original rom that it came with, you dont want to soft/hard brick the device.
Click to expand...
Click to collapse
Lito, I tryied to flash the original room, I am using XperiaFirm to download the firmware and flashtool to flash. I can flash the Oi room, but i can't flash the vivo BR, the Claro Argentina, or the Customized PT, all of them results in a blank error, it's not drivers problems, since i can install the Oi firmware and also i disabled the signature on windows in order to install.
Anyway, i solved the problem in order to show another problem. Here is the situation:
I created another APN to use when i don't want to use internet because even with data package disabled my mobile send data to the carrier that charges me, when i deleted that APN the 4G worked perfectly, but now my carrier is charging me the data . Any idea how to block this data comsumption?
Thanks again.

DiegoManBR said:
Lito, I tryied to flash the original room, I am using XperiaFirm to download the firmware and flashtool to flash. I can flash the Oi room, but i can't flash the vivo BR, the Claro Argentina, or the Customized PT, all of them results in a blank error, it's not drivers problems, since i can install the Oi firmware and also i disabled the signature on windows in order to install.
Anyway, i solved the problem in order to show another problem. Here is the situation:
I created another APN to use when i don't want to use internet because even with data package disabled my mobile send data to the carrier that charges me, when i deleted that APN the 4G worked perfectly, but now my carrier is charging me the data . Any idea how to block this data comsumption?
Thanks again.
Click to expand...
Click to collapse
that is extremely weird, never had such issues with any of my android phones. make sure data roaming is not on, the carrier shouldnt be able to charge you if you disabled data
Also, make sure the FTF files youve made with xperifirm and flashtool are correct, like not including the TA files etc..., i would advise you redownload those FTF files and try again, also make sure you have the latest flashtool available.
at this point, you are probably better seeking for a developer or someone who can read codes, make a logcat and see if the flashtool thread is available and ask there. Aside from the FTF files, you are better off asking the carrier why they are still able to charge you in such way. Sorry man, this is as far I can aid you in this matter. GL bud!

No Internet Data in CM14 (no G,3G,4g)

Hi guys, I have been trying to get the MI 4c working with the data but still with troubles. I have restored to stock 2 times ( a long nightmare getting locked by the way) and still without getting the Data working. I can call and use internet with WIFI but not by itself.
Anyone can give a hand?
Trying with different bands in the menu of *#*#4636#*#* without a happy end.
THANKS A LOT

trying this guide about Restoring IMEI DIDN´T work!!!
en.miui.com/thread-315233-1-1.html

Are you using 2 Sims? Have you tried manually adding the apn details?

ermacwins said:
Are you using 2 Sims? Have you tried manually adding the apn details?
Click to expand...
Click to collapse
I am using only 1 SIM, and YES I have tried to put APN manual.

Does the *#06# gives you an IMEI number (or 2...).
If not, what happen to loose it? You should start by explaining that.

Kéno40 said:
Does the *#06# gives you an IMEI number (or 2...).
If not, what happen to loose it? You should start by explaining that.
Click to expand...
Click to collapse
It is giving me 2 IMEI NUMBERS but in Settings, About Phone and Status doesnt show my mobile number.
AFTER RESTORE TO LATEST MIUI I can use DATA 4g but I want to use Cyanogenmod instead, lets see.

tiredofthisbs said:
Settings, About Phone and Status doesnt show my mobile number.
Click to expand...
Click to collapse
That's not important.
So in the CM, there is just a problem with APN.
Post what are they maybe someone from your country could help....

After restore Stock rom MIUI 6.1.7, unblocked with fastboot oem unlock and flashing twrp and CM 14.1 I got 4g working I went to something about SIM CARD activate, and removing all APN and putting my APN manually. I did it before but didn't work .But after all it interrupts also WIFI after a few minutes I dont understand why.

Need Solutions For Sony Xperia XZ SOV34 With No Service Carrier

Hi everybody,
I still have a problem with my carrier signal.
1. Sony XZ SOV34 has SIM unlocked
2. Already unlocked bootloader
3. Using Global ROM and already using ExistenZ Oreo
The problem that makes me confused is imei and baseband, there is no problem, but the sim carrier cannot register.
From this problem what should I do?

Hello can you check your apn settings for your operator? If they are all setup correctly try selecting network manually.
Note: You need to search your own mobile operator's apn settings I can't really help with that.

oguzbatu said:
Hello can you check your apn settings for your operator? If they are all setup correctly try selecting network manually.
Note: You need to search your own mobile operator's apn settings I can't really help with that.
Click to expand...
Click to collapse
You see my attach i can't write access APN and my Fido keys is not provisioned but safetynet its ok. So what i should do now?
Thank you

seyrarms said:
You see my attach i can't write access APN and my Fido keys is not provisioned but safetynet its ok. So what i should do now?
Thank you
Click to expand...
Click to collapse
Fido keys doesn't matter for network connectivity. Since you can't setup APN thats the reason it is not connecting. Are you sure that you are not running dual sim version of Xperia XZ? Can you also try tp flash stock rom without exitenz mods? To see if it changes anything.

oguzbatu said:
Fido keys doesn't matter for network connectivity. Since you can't setup APN thats the reason it is not connecting. Are you sure that you are not running dual sim version of Xperia XZ? Can you also try tp flash stock rom without exitenz mods? To see if it changes anything.
Click to expand...
Click to collapse
My Xperia XZ single sim not dual idk what happen with this. Since i unlock this bootloader from tool S1 Network tool
My sim carries change to "No Services". I'm tried to re flash back to Japan rom and back again to global rom but same just "no service"

seyrarms said:
My Xperia XZ single sim not dual idk what happen with this. Since i unlock this bootloader from tool S1 Network tool
My sim carries change to "No Services". I'm tried to re flash back to Japan rom and back again to global rom but same just "no service"
Click to expand...
Click to collapse
Can you try to flash your device with Sony's emma tool and see if it works. If it doesn't fix I don't know what will because this doesn't seem something about software nothing like this happened to anybody I assume.

oguzbatu said:
Can you try to flash your device with Sony's emma tool and see if it works. If it doesn't fix I don't know what will because this doesn't seem something about software nothing like this happened to anybody I assume.
Click to expand...
Click to collapse
Ok i will try

After flashing the firmware..Try to reflash baseband(modem) only..I got this problem back then when i downgrade to marshmallow..and update to nougat via OTA...i lost baseband and imei number...but it's all fixed after i reflash baseband..
NOTE:BASEBAND MUST BE THE SAME AS YOUR ANDROID VERSION!!!

oguzbatu said:
Can you try to flash your device with Sony's emma tool and see if it works. If it doesn't fix I don't know what will because this doesn't seem something about software nothing like this happened to anybody I assume.
Click to expand...
Click to collapse
Thank you sir my signal is back. I'm use tool EFS Profesional can give back again
Roowz said:
After flashing the firmware..Try to reflash baseband(modem) only..I got this problem back then when i downgrade to marshmallow..and update to nougat via OTA...i lost baseband and imei number...but it's all fixed after i reflash baseband..
NOTE:BASEBAND MUST BE THE SAME AS YOUR ANDROID VERSION!!!
Click to expand...
Click to collapse
Thanks sir

Just follow one of these Guides...
If U have Unlock Code for Network:
If not try this. It's not easy but works:
I can't post links here. PM me if you still need help
If your baseband and IMEI has gone just flash the 39.0.C.0.282 AU either with flashtool. Better option is xflasher
seyrarms said:
Thank you sir my signal is back. I'm use tool EFS Profesional can give back again
Thanks sir
Click to expand...
Click to collapse