Hi!
OFFICIAL IMAGES HERE: http://www.filefactory.com/file/14mn1ui7sx0t/GPE_XT1032_KOT49H.M004_CFC.xml.zip (thanks to @daywalker04 from firmware-team and @denzel09 for shared the link)
Mirror 1: https://drive.google.com/file/d/0Bxgf37IA03s-dHBDZDF2NTA1bWM/edit?usp=sharing
These fastboot images are made by me using @oldblue910 dumps. So if you have anyone to say thank you, donate and others forms of thanks, this person is oldblue910 before me =).
Partitions BOOT, RECOVERY, LOGO, FSG (fsg_gpe.img) and MODEM are same as flashed on GPE devices.
Partitions FSG (fsg_intl.img) and SYSTEM was created by me. SYSTEM partition was created based on SYSTEM dump + fixed permissions+owner, timestamp, symlinks and meta-data, to appears like stock one. fsg_intl.img intends to be used by people outside USA to made phone operator works.
These images are unsigned, means that you can't fastboot oem lock with these files.
I'm saying again! If have someone to say thank you, this person is oldblue910. Without him this work wasn't possible.
PAYPAL: [email protected]
Do not copy and paste '(text_inside)' part of commands.
For people outside USA:
Code:
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot reboot-bootloader
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg_intl.img (see below)
fastboot erase cache
fastboot erase userdata
fastboot reboot
For people who lives in USA:
Code:
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot reboot-bootloader
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg_gpe.img (see below)
fastboot erase cache
fastboot erase userdata
fastboot reboot
UPDATE: Keep your fsg (fsg.mbn) partition before trying these one. You may get out of service.
Works on XT1033 too (single sim only).
I'm not responsible for dead phones. Use as your own risk.
If you do prefer CWM flashable, go with this: http://forum.xda-developers.com/showthread.php?t=2626803
Download link: https://drive.google.com/file/d/0B3o5NziVM8e5Ml9na1RhQWxIMTg/edit?usp=sharing
Motorola Fastboot: https://drive.google.com/file/d/0B3o5NziVM8e5UVlfMDZkNUtsaG8/edit?usp=sharing
Where is the link for the download
Gesendet von meinem XT1032 mit Tapatalk
excellent, waiting download link.
correction.
Thanks for sharing this, downloading to test, I hope not kill my Moto G in the attempt.
---------- Post added at 02:01 AM ---------- Previous post was at 01:15 AM ----------
I just install and everything is working properly. Start the google logo shows a padlock, I guess that refers to the bootloader is released.
Now proves install cwm and try to root.
---------- Post added at 02:20 AM ---------- Previous post was at 02:01 AM ----------
install cwm 6.0.4.6,
to flash the superuser.zip, but can not mount the sd card
the only way to install superuser.zip, is through sideload
Due to CWM/stock rom uses f2fs userdata partition. GPE uses ext4.
Sent from my XT1032 using Tapatalk
ffosilva said:
Due to CWM/stock rom uses f2fs userdata partition. GPE uses ext4.
Sent from my XT1032 using Tapatalk
Click to expand...
Click to collapse
ok, I understand.
for now I cared about was having root access. already made through sideload.
thanks for everything. :good:
Can i lock the bootloader?
Gesendet von meinem XT1032 mit Tapatalk
---------- Post added at 10:01 AM ---------- Previous post was at 09:54 AM ----------
OK i read the first post
Gesendet von meinem XT1032 mit Tapatalk
---------- Post added at 10:05 AM ---------- Previous post was at 10:01 AM ----------
Ota works?
Gesendet von meinem XT1032 mit Tapatalk
Will this system changes deny ota installation when it comes?
Hey, great job!
Is the bootloader taken from GPE device?
Have you tried to dump system partition image using dd on gpe device? It should be signed then.
And what's the difference between FSG partitions? I have X1032 from Tesco UK, I live in Poland, and I have flashed 4.4 stock from US, and modem is working pretty good, so what's the point of using 2 different FSG partitions?
marcin1147 said:
Hey, great job!
Is the bootloader taken from GPE device?
Have you tried to dump system partition image using dd on gpe device? It should be signed then.
And what's the difference between FSG partitions? I have X1032 from Tesco UK, I live in Poland, and I have flashed 4.4 stock from US, and modem is working pretty good, so what's the point of using 2 different FSG partitions?
Click to expand...
Click to collapse
No, bootloader and partition is the same version who found on GPE. The difference between FSG partitions is: on original FSG 0.tar.gz file is a real file and at least on Brazil it doesn't connect to any operator; modified one 0.tar.gz is a symlink to us retail global file.
I've just kept my old bootloader, modem, etc. to make sure everything will be working fine.
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot erase cache
fastboot erase userdata
fastboot reboot
Click to expand...
Click to collapse
I think its better flash modem because ota patch modem partition (/firmware). Fsg partition in fact changes how radio works.
Sent from my XT1032 using Tapatalk
So do you have to be rooted to do this...? I don't think so, but I just thought I'd ask...
Also if this process is done, will we get ota's as well or no?
Sent from my XT1034 using Tapatalk
Glad to know the issue with cwm is not just in my ROM lol
Sent from my XT1032 using xda app-developers app
OTA questions will be answered when they were available.
Sent from my XT1032 using Tapatalk
Doesn't work no service
Sent from my XT1032 using xda app-developers app
This means that we can make a really Moto G Google version? We get the new updates and all stuff. And can sell it as a google phone. Am I right?
can someone upload just the logo for me please as i just want the Google splash screen
tillaz said:
can someone upload just the logo for me please as i just want the Google splash screen
Click to expand...
Click to collapse
gpl logo.bin
International instructions worked well here. UK/Tesco XT1032.
I rooted by adb sideloading supersu.motog.zip (attached) after flashing the recommended recovery.
Thanks!
Do you have to be rooted to do this or no ?
Sent from my XT1034 using Tapatalk
---------- Post added 3rd February 2014 at 12:47 AM ---------- Previous post was 2nd February 2014 at 11:51 PM ----------
ok I tried to do this on my U.S. model Moto G with Bootloader locked and unrooted, After I flashed the bootloader, I got "hab check filed failed for boot, After I fashed Recovery, I got the following error message "hab check failed for the recovery. And when I flashed the system, I got the error message "invalid signed image"
I then continued through all the steps but when the phone turned back on, I still had motorola apps as if nothing changed...
Update:
I went ahead and unlocked my bootloader and finally got it installed. However, I have no service So I will be reverting back to Motorola 4.4.2 then reflashing the GPE files without flashing the modem files and see if that works
Related
Hi, I have the 8gb Moto G Spanish version (don't know any more of it), I unlocked the bootloader yesterday, rooted it, installed CWM and I tried to flash beanstalk but my phone got stuck in the bootanimation (I know it takes time, I left it through all the night and didn't work). After that I tried with other roms (maybe a bad download or incompatible issues or something) but there's no way to make it go past the bootanimation. I tried PA, CM (xt1032) and a couple more but nothing.
I also tried to go back to stock firmware with this guide but couldn't do it either. Can anyone help me?
Exactly the same problem here. Haven't found any help yet
Sent from my XT1032 using Tapatalk
Clear the phones userdata.
Tried that too. Didn't work
Sent from my XT1032 using Tapatalk
This happened to me too, i had to download the firmware for ur country, followed the guide but u have to remove lines from the bat and sh files then it works
Sent from my XT1032 using XDA Premium 4 mobile app
x-Wooboost-x said:
Tried that too. Didn't work
Sent from my XT1032 using Tapatalk
Click to expand...
Click to collapse
Try this:
Code:
#mfastboot.exe flash partition gpt.bin
mfastboot.exe flash motoboot motoboot.img
mfastboot.exe flash logo logo.bin
mfastboot.exe flash boot boot.img
mfastboot.exe flash recovery recovery.img
mfastboot.exe flash system system.img_sparsechunk.0
mfastboot.exe flash system system.img_sparsechunk.1
mfastboot.exe flash system system.img_sparsechunk.2
mfastboot.exe flash modem NON-HLOS.bin
mfastboot.exe erase modemst1
mfastboot.exe erase modemst2
mfastboot.exe flash fsg fsg.mbn
mfastboot.exe erase cache
mfastboot.exe erase userdata
mfastboot.exe reboot
How do I do all that
Sent from my XT1032 using Tapatalk
if your on 4.4.2 all you need is the 4.4.2 firmware or 4.3 firmware, download the zip one, then unzip and double click flashall(windows batch file), it should install the firmware you have, just looked, you need the spanish one or eu, and when i tried to go from 4.4 to 4.3 it came up with an error, in the guide it explains you need to delete a couple lines of code in two files, if you follow the guide you cant go wrong.
Can you link me to the guide please? Would be appreciated
Sent from my XT1032 using Tapatalk
http://forum.xda-developers.com/showthread.php?t=2542219
this thread wooboost
---------- Post added at 04:05 PM ---------- Previous post was at 04:02 PM ----------
pay attention to post on 3a, if you can only go back to 4.3 you need to do this. also you need adb but dont need to use it, just click on the flashall.bat file, it should then wipe everything and go back to 4.3
Thanks man! I'll try it when I get back home
Sent from my XT1032 using Tapatalk
Is there any way I can flash a stock firmware without unlocking my bootloader? I only want to flash the xt1032 stock rom to get rid of the second sim stuff.
Sent from my XT1033 using Tapatalk
vlt96 said:
Is there any way I can flash a stock firmware without unlocking my bootloader? I only want to flash the xt1032 stock rom to get rid of the second sim stuff.
Sent from my XT1033 using Tapatalk
Click to expand...
Click to collapse
After flashing stock rom all your data will be erased as well as after unlocking bootloader.
So, why dont you want to unlock it?
Also I saw somewhere how to relock bootloader...
---------- Post added at 02:23 PM ---------- Previous post was at 02:18 PM ----------
So, this is the way how you can do:
1. Unlock your bootloader.
2. Now use mfastboot for flashing stock rom.
Download stock rom files
Open cmd
Enter:
fastboot oem lock begin
Then flash stock rom
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk1
mfastboot flash system system.img_sparsechunk2
mfastboot flash system system.img_sparsechunk3
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
Enter:
fastboot oem lock
So, now you have new rom with locked bootloader
I know how that works, I just hope relocking it gets the warranty back... I got this phone because my S3 mini's battery died, I just hope I still have the warranty in case I need the battery changed..
Sent from my XT1033 using Tapatalk
vlt96 said:
I know how that works, I just hope relocking it gets the warranty back... I got this phone because my S3 mini's battery died, I just hope I still have the warranty in case I need the battery changed..
Sent from my XT1033 using Tapatalk
Click to expand...
Click to collapse
Nope you invalidated the integrity of some files that cant be changed even with the highest root. Basically you loose warranty permanently after unlock because phone recognizes original lock and user lock. You are allowed to flash an oiginal firmware image without unlocking the phone. See this thread: http://forum.xda-developers.com/showthread.php?t=2542219
eg0097 said:
Nope you invalidated the integrity of some files that cant be changed even with the highest root. Basically you loose warranty permanently after unlock because phone recognizes original lock and user lock. You are allowed to flash an oiginal firmware image without unlocking the phone. See this thread: http://forum.xda-developers.com/showthread.php?t=2542219
Click to expand...
Click to collapse
It worked! Thank you!
If an administrator sees this, the thread can be closed.
Sent from my XT1032 using Tapatalk
HOW TO DOWNGRADE from 6.0 to 5.1.1
this is just a reminder for those who installed the OTA. 5.1.1 and want to go back and have a little afraid (personally I stay at 6.0)
as we know whenever motorola launches an update we have a change in the numbering of the boot, and security for a possible brick be skipped two lines, in this case we have no motoboot call but in this case is called bootloader and the second is the gpt.bin kills equipment.
NOTE: Following this procedure exactly it is safe to get the ota 6.0
Note 2: unlock bootloader
then the scrip is the sig: way (via fastboot)
fastboot enter and move with VOL- key to bootloader log from there we will see the process at our terminal in every command that apply
fastboot flash partition gpt.bin (NOT FLASH)
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash FSG fsg.mbn
fastboot erase cache
fastboot erase userdata (if you choose not to put the command does not lose data, or information of sd)
fastboot reboot
Your computer starts
note. and once you start and configure them appear a message downgrade firmware in reference to sensors motorola, nothing to fear just say yes
Cheers
Question
First for all thanks for you tutorial.
I had to downgrade beacuse i messed something up and got into a boot stuck in 6.0.
I have downgraded to my original firmware (Mexico), but i wan to try again installing soak test.
I need to reinstall brazil firmware and then OTA, my quiestion is if I need to skip again flashing the bootloader.img and the gpt.bin
Or the skip thing is only for downgrading?
Yes install brazilian. if doing the downgrade ignores files is equal to switch to firmware Brazil will have omitted to put back the ota
Enviado desde mi XT1563 mediante Tapatalk
Actually I am new to these fast boot and other stuff as I have migrated from samsung and have never used such things.I am from India and my phone is not rooted.I have downloaded the Indian OTA file from the other thread and my phone detects it for up gradation.But I have a little doubt here.If something goes wrong and I have ro revert back to the original 5.1.1 firmware,do I have to follow this procedure?If so please give a detailed step by step tutorial as it will help not only me,but also many others who might need to revert back to original and are noob like me in this regard.
I downgraded my moto x pure edition xt1575 today from 6.0 soak test back to 5.1.1 then installed the final 6.0 ota I had to use Mfastboot to do this and I had to flash bootloader but not gpt.bin
situ1962 said:
Actually I am new to these fast boot and other stuff as I have migrated from samsung and have never used such things.I am from India and my phone is not rooted.I have downloaded the Indian OTA file from the other thread and my phone detects it for up gradation.But I have a little doubt here.If something goes wrong and I have ro revert back to the original 5.1.1 firmware,do I have to follow this procedure?If so please give a detailed step by step tutorial as it will help not only me,but also many others who might need to revert back to original and are noob like me in this regard.
Click to expand...
Click to collapse
practically , if you use the right you ota not have any problem even if you have not released the bootloader. if you run into a problem I will try to restore this procedure omitting the two files, after that if any error jumps indicate the bootloader us
for the most common consequence are devido to upgrade gpt.bin which is already in the fleet to be removed and driven independently, the other is the boot .
and to get out of a serious problem easier to do it with the unlocked bootloader
in this community of xda much information and many people helping of heart can be sure that more than one will help you in case of a problem
So, we don't flash gpt and bootloader?
Yes, dont flash
Enviado desde mi XT1563 mediante Tapatalk
i flashed update zip of android m and then want to downgrade so when trying to flash lollipop rom gives error signed verification failed in all "system.img_sparsechunk" also gpt.bin not installing and device not starting..what to do now please help bootloader is locked..
Please help
Thanks in advance
I have successfully upgraded my phone to Android 6.But I want to go back.So please give a detail tutorial.I am a little confused.It will help others also.
bits9894 said:
i flashed update zip of android m and then want to downgrade so when trying to flash lollipop rom gives error signed verification failed in all "system.img_sparsechunk" also gpt.bin not installing and device not starting..what to do now please help bootloader is locked..
Please help
Thanks in advance
Click to expand...
Click to collapse
if you already had released the bootloader and Cel brickeo status 0 but it will open bootloader, we need more data about what happened to you that was the last thing you did or do quisistes as OTA you should not skip that error unless you use fastboot. OTA gpt.bin extracted and put only. otherwise you'll have to unlockbootloader and install the firmware
Enviado desde mi XT1563 mediante Tapatalk
situ1962 said:
I have successfully upgraded my phone to Android 6.But I want to go back.So please give a detail tutorial.I am a little confused.It will help others also.
Click to expand...
Click to collapse
specifically when you are confused to give information
Check this. http://forum.xda-developers.com/showthread.php?t=3261486
Enviado desde mi XT1563 mediante Tapatalk
flopezm said:
specifically when you are confused to give information
Check this. http://forum.xda-developers.com/showthread.php?t=3261486
Enviado desde mi XT1563 mediante Tapatalk
Click to expand...
Click to collapse
I have downloaded the stock lollipop firmware for India.Will the above procedure downgrade my not rooted phone from Marshmallow to Lollipop or should I do something different in between.So please guide me.
situ1962 said:
I have successfully upgraded my phone to Android 6.But I want to go back.So please give a detail tutorial.I am a little confused.It will help others also.
Click to expand...
Click to collapse
Download the 5.1.1 firmware and via Fastboot ADB do the following commands:
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot reboot
situ1962 said:
I have downloaded the stock lollipop firmware for India.Will the above procedure downgrade my not rooted phone from Marshmallow to Lollipop or should I do something different in between.So please guide me.
Click to expand...
Click to collapse
The procedure does not change, you can use any specific firmware for your phone,
Enviado desde mi XT1563 mediante Tapatalk
Warkratos said:
Download the 5.1.1 firmware and via Fastboot ADB do the following commands:
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot reboot
Click to expand...
Click to collapse
Thanks brne final question though.My phone is not rooted and I have updated through Indian OTA file.So,will this method work for me?
situ1962 said:
Thanks brne final question though.My phone is not rooted and I have updated through Indian OTA file.So,will this method work for me?
Click to expand...
Click to collapse
This metod work forma you. you do not need root, if you need bootloader unlocker
Enviado desde mi XT1563 mediante Tapatalk
flopezm said:
This metod work forma you. you do not need root, if you need bootloader unlocker
Enviado desde mi XT1563 mediante Tapatalk
Click to expand...
Click to collapse
So,to revert back to 5.1.1 do I have to unlock my bootloader first or simply follow the above guide and I am done?
flopezm said:
if you already had released the bootloader and Cel brickeo status 0 but it will open bootloader, we need more data about what happened to you that was the last thing you did or do quisistes as OTA you should not skip that error unless you use fastboot. OTA gpt.bin extracted and put only. otherwise you'll have to unlockbootloader and install the firmware
Enviado desde mi XT1563 mediante Tapatalk
Click to expand...
Click to collapse
My dear brother i flashed ota file which were given in xda but i don't like that so i want to downgrade to android L. So i try to flash android L stock firmware some file flashed some not and stuck into bootloader everytime. Phone not starting i tried to unlock bootloader but not having. What to do bro..?
situ1962 said:
So,to revert back to 5.1.1 do I have to unlock my bootloader first or simply follow the above guide and I am done?
Click to expand...
Click to collapse
Some firmwares doesn't let you revert back without unlocking the bootloader, brazilian firmware .32 is one example. And on your firmware, you have to look if there are more sparsechunk files, and do the flash system to all of them.
Official zipped Nougat Stock firmware
https://mega.nz/#!ystC2ZSL!ql6cyC5v5RgLQfo7G44mhi7Ng-AQBvtsouKxKinbHi8
SHA-1 - 166d88ce734298dd40c1dbd7afbdac3c773a72ac
MD5 - b870c67a8020d314df3874c140606de4
CRC32 - cdfd2e36
Flash via fastboot.
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot reboot
Do it manually or with .bat in attachement (archived because of file ending)
Can I relock the bootloader, after flashing this firmware?
Pain00556 said:
Can I relock the bootloader, after flashing this firmware?
Click to expand...
Click to collapse
Yes, if you prefer.
Does anyone tried it on indian xt1643
can you upload it in androidfilehost or google drive or upload( modem NON-HLOS.bin ) from firmware zip please
Where did you get the zip from?All these posts claiming its official but don't point us to the source.
Prabhat00 said:
Does anyone tried it on indian xt1643
Click to expand...
Click to collapse
i myself tested its working fine
syedhmed said:
Where did you get the zip from?All these posts claiming its official but don't point us to the source.
Click to expand...
Click to collapse
http://www.filefactory.com/file/ikh...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip here source but it's blocked in india due to government restrictions so they uploaded it to mega and this is link for all motorola roms https://www.filefactory.com/folder/c6cdedc45a775d27/?sort=created&order=DESC&show=100
D1AMONDH3AD said:
http://www.filefactory.com/file/ikh...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip here source but it's blocked in india due to government restrictions so they uploaded it to mega and this is link for all motorola roms https://www.filefactory.com/folder/c6cdedc45a775d27/?sort=created&order=DESC&show=100
Click to expand...
Click to collapse
Yes...!
I tried it with my Indian Variant XT1643 and working well, locked bootloader as well, this is Official Full Stock Nougat 7.0 Rom NPJ25.93-11 With November Patch
No doubt you can try it guys ..
---------- Post added at 01:03 AM ---------- Previous post was at 01:00 AM ----------
Gimme some time guys, ZIP uploading in WeTransfer and Google Drive as well
Has anyone tried this with the XT1644
i tried downloading more than 6 times daam it failed everytime at 2.41gb i am done , can someone upload it to google drive
jerpd3rp said:
Has anyone tried this with the XT1644
Click to expand...
Click to collapse
Yes, it works. Been using it for a couple of days already and I haven't experienced any issue (RETUS).
***Deleted***
Can Anyone help me out
I have downloaded both the firmware and fastboot files.
Now tell me what should I do next ??
@HE4VYCR0WN
Mercado_Negro said:
Yes, it works. Been using it for a couple of days already and I haven't experienced any issue (RETUS).
Click to expand...
Click to collapse
This ROM works on xt1626 model brazilian with digital TV?
Sunny020 said:
Can Anyone help me out
I have downloaded both the firmware and fastboot files.
Now tell me what should I do next ??
@HE4VYCR0WN
Click to expand...
Click to collapse
Extract firmware in fastboot folder, then use SHIFT + RCLICK there (Open new command prompt) and insert commands in post #1 one by one
is it possible to put forth the command to erase userdata? so the flashing is done after wiping the phone
Mercado_Negro said:
Yes, it works. Been using it for a couple of days already and I haven't experienced any issue (RETUS).
Click to expand...
Click to collapse
After flashing does it show retin or retus in the about section? And have you experienced any issues? I have a xt1644 g4plus 64gb/4gb model and wanna do the upgrade, but not if there's issues though. Thanks in advance
ice711 said:
After flashing does it show retin or retus in the about section? And have you experienced any issues? I have a xt1644 g4plus 64gb/4gb model and wanna do the upgrade, but not if there's issues though. Thanks in advance
Click to expand...
Click to collapse
It shows RETUS. No issues so far besides the notification sounds being low some times.
Flashed on my XT1644 g4plus on Verizon in the US yesterday.
So far, I have no issues to report. Seems to work fine. It does seem the battery drains faster, but I am likely just using it more looking for new stuff...
I do miss my ad blocker, though. Hopefully it'll be rooted soon, otherwise I may try a custom ROM just to keep these dang ads away...
Sent from my Moto G (4) using Tapatalk
XT1562 Single SIM
LUX_RETEU_7.1.1_NPD26.48-24-1_cid7_subsidy-DEFAULT_CFC.xml
https://rsdsecure-cloud.motorola.co...PD26.48-24-1_cid7_subsidy-DEFAULT_CFC.xml.zip
https://mega.nz/#!fUUSBCoJ!LXmGhG5EpFlT4bqUvU2aX8yoUVVJHgv8LVbMprzrqzI
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
Dual ?? Single SIM??
Enviado desde mi Moto X Play mediante Tapatalk
matuscristian said:
Dual ?? Single SIM??
Enviado desde mi Moto X Play mediante Tapatalk
Click to expand...
Click to collapse
Single SIM Europe
Upload XT1563 Latam SINGLE SIM Cid12 Please !!!
xt610 said:
Upload XT1563 Latam SINGLE SIM Cid12 Please !!!
Click to expand...
Click to collapse
The link is not active yet.
For now, it is not available for download.
https://rsdsecure-cloud.motorola.co...D26.48-24-1_cid12_subsidy-DEFAULT_CFC.xml.zip
Thanks
I waiting for available link
News ???
Seems to work fine, very big thanks, I was frustrated to be stuck with 6.0.1
PS : it's possible that the phone stay stuck on the boot logo, butI turned it off and on again and Android loaded within a few seconds
xt610 said:
News ???
Click to expand...
Click to collapse
XT1563 Latam SINGLE SIM Cid12
First, the 7.1.1 update is available for download in the OTA channel, and then after a few weeks, the fastboot image will be available for download.
]Devilman[ said:
Seems to work fine, very big thanks, I was frustrated to be stuck with 6.0.1
PS : it's possible that the phone stay stuck on the boot logo, butI turned it off and on again and Android loaded within a few seconds
Click to expand...
Click to collapse
You're welcome
Perfect original Image, all work fine, many thank's
Do I have to root my phone to flash this? I was hoping to load it from the bootloader but I can't get it to work. Thanks
DaveyC74 said:
Do I have to root my phone to flash this? I was hoping to load it from the bootloader but I can't get it to work. Thanks
Click to expand...
Click to collapse
Before you do anything, read about the fastboot program on the XDA forum. There is no root or unlocked bootloader required.
Which Baseband does this come with? Currently on M8936_2020632.44.03.21.57R and wondering if worth updating baseband only (currently using LOS 14.1 as ROM). Cheers
siarp said:
Which Baseband does this come with? Currently on M8936_2020632.44.03.21.57R and wondering if worth updating baseband only (currently using LOS 14.1 as ROM). Cheers
Click to expand...
Click to collapse
Baseband Version: M8936_20250112.18.05.38R
You can always test. Without loss of data, you can go back to the previous version of the modem(fastboot marshmallow 6.0.1).
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
QZmichal said:
Baseband Version: M8936_20250112.18.05.38R
You can always test. Without loss of data, you can go back to the previous version of the modem(fastboot marshmallow 6.0.1).
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
Click to expand...
Click to collapse
OK thanks for the info, tried the above commands (twice now) and under phone status the baseband version hasn't updated, the fastboot commands executed OK. Any ideas? Has it updated just not the references to the version?
Hello! I'm facing huge trouble with fastboot. Can someone have a Flashable Zip or a twrp backup of this OTA? :crying: thx a lot
Android Pay is not working unable to verify phone, unlocked bootloader etc. On Lineageos everything works greate.
twiti7 said:
Android Pay is not working unable to verify phone, unlocked bootloader etc. On Lineageos everything works greate.
Click to expand...
Click to collapse
Android Pay requires a blocked bootloader. In LIneageos or another custom rom, the Magisk program hides Root and the unlocked bootloader.
Install the Magisk program on a stock android
Or
You are blocking the bootloader
Thanks from now I'm using magisk