Database Info

Stucked in bootanimation

Hi, I have the 8gb Moto G Spanish version (don't know any more of it), I unlocked the bootloader yesterday, rooted it, installed CWM and I tried to flash beanstalk but my phone got stuck in the bootanimation (I know it takes time, I left it through all the night and didn't work). After that I tried with other roms (maybe a bad download or incompatible issues or something) but there's no way to make it go past the bootanimation. I tried PA, CM (xt1032) and a couple more but nothing.
I also tried to go back to stock firmware with this guide but couldn't do it either. Can anyone help me?

Exactly the same problem here. Haven't found any help yet
Sent from my XT1032 using Tapatalk

Clear the phones userdata.

Tried that too. Didn't work
Sent from my XT1032 using Tapatalk

This happened to me too, i had to download the firmware for ur country, followed the guide but u have to remove lines from the bat and sh files then it works
Sent from my XT1032 using XDA Premium 4 mobile app

x-Wooboost-x said:
Tried that too. Didn't work
Sent from my XT1032 using Tapatalk
Click to expand...
Click to collapse
Try this:
Code:
#mfastboot.exe flash partition gpt.bin
mfastboot.exe flash motoboot motoboot.img
mfastboot.exe flash logo logo.bin
mfastboot.exe flash boot boot.img
mfastboot.exe flash recovery recovery.img
mfastboot.exe flash system system.img_sparsechunk.0
mfastboot.exe flash system system.img_sparsechunk.1
mfastboot.exe flash system system.img_sparsechunk.2
mfastboot.exe flash modem NON-HLOS.bin
mfastboot.exe erase modemst1
mfastboot.exe erase modemst2
mfastboot.exe flash fsg fsg.mbn
mfastboot.exe erase cache
mfastboot.exe erase userdata
mfastboot.exe reboot

How do I do all that
Sent from my XT1032 using Tapatalk

if your on 4.4.2 all you need is the 4.4.2 firmware or 4.3 firmware, download the zip one, then unzip and double click flashall(windows batch file), it should install the firmware you have, just looked, you need the spanish one or eu, and when i tried to go from 4.4 to 4.3 it came up with an error, in the guide it explains you need to delete a couple lines of code in two files, if you follow the guide you cant go wrong.

Can you link me to the guide please? Would be appreciated
Sent from my XT1032 using Tapatalk

http://forum.xda-developers.com/showthread.php?t=2542219
this thread wooboost
---------- Post added at 04:05 PM ---------- Previous post was at 04:02 PM ----------
pay attention to post on 3a, if you can only go back to 4.3 you need to do this. also you need adb but dont need to use it, just click on the flashall.bat file, it should then wipe everything and go back to 4.3

Thanks man! I'll try it when I get back home
Sent from my XT1032 using Tapatalk

[Q] Moto G bootloop

I bought the dual sim version Moto G from Flipkart as it is only available in India.
Yesterday night i was listening to music at night, stopped it and kept it aside at night.
Today morning i found the lock screen was opening slowly, i thought rebooting the device would clear the problem.
Rebooted, but it went on Bootloop
Just the Motorola blue logo can be seen and next screen is black.
Tried going to recovery but again same bootloop, no android logo,
I didn't do anything with my phone, just used normal apps like whatsapp,facebook.
Had official 4.4 OTA updated a month back. Phone not rooted. Please help :'(

Flash the cwm recovery, wipe and reset data and try.. It might help you.. There are lots of guide to tell you how to flash cwm recovery using Fastboot .. A little Google search will help... Otherwise get the replacement from the flipkart if possible...
Sent from my XT1033 using xda app-developers app

ahank said:
I bought the dual sim version Moto G from Flipkart as it is only available in India.
Yesterday night i was listening to music at night, stopped it and kept it aside at night.
Today morning i found the lock screen was opening slowly, i thought rebooting the device would clear the problem.
Rebooted, but it went on Bootloop
Just the Motorola blue logo can be seen and next screen is black.
Tried going to recovery but again same bootloop, no android logo,
I didn't do anything with my phone, just used normal apps like whatsapp,facebook.
Had official 4.4 OTA updated a month back. Phone not rooted. Please help :'(
Click to expand...
Click to collapse
How did you try to access bootloader?

matmutant said:
How did you try to access bootloader?
Click to expand...
Click to collapse
Just pressed the volume down and power, it showed recovery then selected that but it rebooted again showing the blue motorola logo

padhu1989 said:
Flash the cwm recovery, wipe and reset data and try.. It might help you.. There are lots of guide to tell you how to flash cwm recovery using Fastboot .. A little Google search will help... Otherwise get the replacement from the flipkart if possible...
Sent from my XT1033 using xda app-developers app
Click to expand...
Click to collapse
Its been 30 days, so can't get it replaced ! Flashing cwm would bring problem to the service center guys?

ahank said:
Its been 30 days, so can't get it replaced ! Flashing cwm would bring problem to the service center guys?
Click to expand...
Click to collapse
If you planning to go to service center, you just go ahead.. Don't do any flashing... If you wanna fix the issue yourself.. Flash the cwm give a try..
Sent from my XT1033 using Tapatalk

ahank said:
Just pressed the volume down and power, it showed recovery then selected that but it rebooted again showing the blue motorola logo
Click to expand...
Click to collapse
how many time did you try ?

matmutant said:
how many time did you try ?
Click to expand...
Click to collapse
10-15 times -_-

I had your same problem after kk update. I performed a wipe data form stock recovery.
Inviato dal mio LG-D802 utilizzando Tapatalk

Just did a reflash of the stock firmware i already had but of no use :'( it still goes to bootloop.

Flash a stock ROM with the stock recovery, you will lose everyting but IT will surely work.
here search your factory firmware rom or whatever: http://sbf.droid-developers.org/phone.php?device=14
and use this to flash all files with minimal adb and fastboot
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot reboot
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk1
mfastboot flash system system.img_sparsechunk2
mfastboot flash system system.img_sparsechunk3
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot reboot
you can also replace mfastboot just with fastboot

@KuGeL94
KuGeL94 said:
Flash a stock ROM with the stock recovery, you will lose everyting but IT will surely work.
here search your factory firmware rom or whatever: http://sbf.droid-developers.org/phone.php?device=14
and use this to flash all files with minimal adb and fastboot
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot reboot
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk1
mfastboot flash system system.img_sparsechunk2
mfastboot flash system system.img_sparsechunk3
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot reboot
you can also replace mfastboot just with fastboot
Click to expand...
Click to collapse
Did that from this firmware but didn't help! Same rebooting occurs and i also tried downgrading to 4.3 but still same :'( Please help :\

ahank said:
@KuGeL94
Did that from this firmware but didn't help! Same rebooting occurs and i also tried downgrading to 4.3 but still same :'( Please help :\
Click to expand...
Click to collapse
Found solution???

jayrocky11 said:
Found solution???
Click to expand...
Click to collapse
Actually it was some hardware problem with my device so I got a new device free of cost from service center

ahank said:
Actually it was some hardware problem with my device so I got a new device free of cost from service center
Click to expand...
Click to collapse
Hmmm thanks

ahank said:
Actually it was some hardware problem with my device so I got a new device free of cost from service center
Click to expand...
Click to collapse
i have same problem with my moto g ...
but service center guys asking me 10k to replace motherbord
is it surely hard ware problem....?

[Q] Downgrade to 4.3 from 4.4.2 out of box XT1033

Before i begin, i am aware there are mutliple other threads about downgrading from KitKat 4.4.2 to JB 4.3 and also have come across the procedure of downgrading. But my query is still different from other ones.
Here is my query, I own a XT1033 dual sim asia with 4.4.2 OUT OF THE BOX. Now, can i manually flash a 4.3 dual sim asia firmware with this status...?
Reason bcz my factory version is 4.4.2 and i was willing to try 4.3 because 4.4.2 has numerous problems with Signal drops, Huge fluctuation in signal, Auto switching to aeroplane mode and back. I came across users of 4.3 out of box and have heard that 4.3 JB had been great in signal quality. Please assist.

==vj== said:
Before i begin, i am aware there are mutliple other threads about downgrading from KitKat 4.4.2 to JB 4.3 and also have come across the procedure of downgrading. But my query is still different from other ones.
Here is my query, I own a XT1033 dual sim asia with 4.4.2 OUT OF THE BOX. Now, can i manually flash a 4.3 dual sim asia firmware with this status...?
Reason bcz my factory version is 4.4.2 and i was willing to try 4.3 because 4.4.2 has numerous problems with Signal drops, Huge fluctuation in signal, Auto switching to aeroplane mode and back. I came across users of 4.3 out of box and have heard that 4.3 JB had been great in signal quality. Please assist.
Click to expand...
Click to collapse
Are you willing to unlock bootloader? or you want to stick with a locked bootloader?

deej_roamer said:
Are you willing to unlock bootloader? or you want to stick with a locked bootloader?
Click to expand...
Click to collapse
I already have an unlocked bootloader and on CM11 since long time. But signal fluctuation issues seems to be in core of 4.4.2 release. I tried Stock Radios of XT1033 Asia, Brazil and India and also flashed stock rom via fastboot commands but none fixed this bug. I gathered feedback from 4.3 users that signal strength was great and there were no crashes in signal (Suddenly aeroplane mode and back normal during ongoing call or during idle status). So, was planning to give a try for 4.3. But i have 4.4.2 out of the box (factory version)
So i was puzzled whether its possible or not possible to try 4.3 with this status
Are there any side effects of downgrading alike breakage of OTA?
Breakage of Bootloader?
Sorry about the essay
Edit : Signal issues only on WCDMA only mode on KK.

==vj== said:
I already have an unlocked bootloader and on CM11 since long time. But signal fluctuation issues seems to be in core of 4.4.2 release. I tried Stock Radios of XT1033 Asia, Brazil and India and also flashed stock rom via fastboot commands but none fixed this bug. I gathered feedback from 4.3 users that signal strength was great and there were no crashes in signal (Suddenly aeroplane mode and back normal during ongoing call or during idle status). So, was planning to give a try for 4.3. But i have 4.4.2 out of the box (factory version)
So i was puzzled whether its possible or not possible to try 4.3 with this status
Are there any side effects of downgrading alike breakage of OTA?
Breakage of Bootloader?
Sorry about the essay
Edit : Signal issues only on WCDMA only mode on KK.
Click to expand...
Click to collapse
Ideally, There are not side effects but
there are increased chances of something to go wrong!
Well, Here is the firmware!

==vj== said:
I already have an unlocked bootloader and on CM11 since long time. But signal fluctuation issues seems to be in core of 4.4.2 release. I tried Stock Radios of XT1033 Asia, Brazil and India and also flashed stock rom via fastboot commands but none fixed this bug. I gathered feedback from 4.3 users that signal strength was great and there were no crashes in signal (Suddenly aeroplane mode and back normal during ongoing call or during idle status). So, was planning to give a try for 4.3. But i have 4.4.2 out of the box (factory version)
So i was puzzled whether its possible or not possible to try 4.3 with this status
Are there any side effects of downgrading alike breakage of OTA?
Breakage of Bootloader?
Sorry about the essay
Edit : Signal issues only on WCDMA only mode on KK.
Click to expand...
Click to collapse
If you are not using second sim, better flash single sim global retail.. and update it to 176.4.1.. I'm not facing any issues like signal drop, flight mode and all...
Sent from my XT1032 using XDA Premium 4 mobile app

Thank you bros for giving your view and ideas.
I undertook risk and tried straight way downgraded yesterday.
Conclusion: 4.4.2 Out of Box (factory version) phones are also downgrade able to 4.3 JB
I downloaded firmware version "Blur_Version.14.85.4.falcon_umtsds.AsiaRetail.en.03" from HERE and also downloaded mfastbootV2 tools. Extracted ROM and Mfastboot tools in same folder.
Saved following commands in notepad and saved it as StockJB.bat and placed in same folder. Executed the bat file and successfully downgraded to 4.3 within a minute.
Code:
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
pause
mfastboot reboot

==vj== said:
Thank you bros for giving your view and ideas.
I undertook risk and tried straight way downgraded yesterday.
Conclusion: 4.4.2 Out of Box (factory version) phones are also downgrade able to 4.3 JB
I downloaded firmware version "Blur_Version.14.85.4.falcon_umtsds.AsiaRetail.en.03" from HERE and also downloaded mfastbootV2 tools. Extracted ROM and Mfastboot tools in same folder.
Saved following commands in notepad and saved it as StockJB.bat and placed in same folder. Executed the bat file and successfully downgraded to 4.3 within a minute.
Code:
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
pause
mfastboot reboot
Click to expand...
Click to collapse
hello i have motto g dual sim indian version..kitktat out of the box...now as mentioned m also facing signle drop issue in 2nd sim sometimes.......now question is if flashed moto g with cwm then warranty will be void ? and after then can i receive OTA update ? or say..if comes to any hw prob...can i flash with stock android and go to service center in warranty time ? warrant is main concern..thats y m asking this silly question,,,,

ankitsuthar said:
hello i have motto g dual sim indian version..kitktat out of the box...now as mentioned m also facing signle drop issue in 2nd sim sometimes.......now question is if flashed moto g with cwm then warranty will be void ? and after then can i receive OTA update ? or say..if comes to any hw prob...can i flash with stock android and go to service center in warranty time ? warrant is main concern..thats y m asking this silly question,,,,
Click to expand...
Click to collapse
Warranty :The answer lies within your question mate. Before installing CWM you need to unlock Bootloader (Primary step without fail). And unlocking bootloader itself permanently voids your warranty bcz you will be submitting the oem code and requesting motorola for unlock key. Therefore, they void your warranty there and email you the unlock key.
Another case, if your factory version is 4.4.2 and you downgrade to 4.3 may also void your warranty (Not very Sure). Bcz you are flashing a non-factory version.
OTA Update : Yes, OTA will be working as confirmed by @Sk.D downgrading to 4.3. And upon upgrading back to 4.4.2 also OTA works as confirmed by me.
Signal : The signal crash (Auto switch to Aeroplane and back normal) bug is not available in 4.3. But the signal drop upon covering bottom half of your phone in a moderate 3g coverage area is same on 4.3 as well 4.4.2

==vj== said:
Warranty :The answer lies within your question mate. Before installing CWM you need to unlock Bootloader (Primary step without fail). And unlocking bootloader itself permanently voids your warranty bcz you will be submitting the oem code and requesting motorola for unlock key. Therefore, they void your warranty there and email you the unlock key.
Another case, if your factory version is 4.4.2 and you downgrade to 4.3 may also void your warranty (Not very Sure). Bcz you are flashing a non-factory version.
OTA Update : Yes, OTA will be working as confirmed by @Sk.D downgrading to 4.3. And upon upgrading back to 4.4.2 also OTA works as confirmed by me.
Signal : The signal crash (Auto switch to Aeroplane and back normal) bug is not available in 4.3. But the signal drop upon covering bottom half of your phone in a moderate 3g coverage area is same on 4.3 as well 4.4.2
Click to expand...
Click to collapse
Thank you mate....for this much clear ans.....its better to keep with stock until 1 year....

stuck up in bootloop
==vj== said:
Thank you bros for giving your view and ideas.
I undertook risk and tried straight way downgraded yesterday.
Conclusion: 4.4.2 Out of Box (factory version) phones are also downgrade able to 4.3 JB
I downloaded firmware version "Blur_Version.14.85.4.falcon_umtsds.AsiaRetail.en.03" from HERE and also downloaded mfastbootV2 tools. Extracted ROM and Mfastboot tools in same folder.
Saved following commands in notepad and saved it as StockJB.bat and placed in same folder. Executed the bat file and successfully downgraded to 4.3 within a minute.
Code:
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
pause
mfastboot reboot
Click to expand...
Click to collapse
followed all the process religiously but the phone stucks in bootloop where as when i flash it with the 4.4.2 it boots normal....i wipe cache and data before all this....what can be the reason please guide...bootloader is unlocked

syedihtisham said:
followed all the process religiously but the phone stucks in bootloop where as when i flash it with the 4.4.2 it boots normal....i wipe cache and data before all this....what can be the reason please guide...bootloader is unlocked
Click to expand...
Click to collapse
Easier way would be to Grab the OTA package of 4.4.4 and update it via stock recovery. Provided you need to on 4.4.2 unrooted and unaltered status.
I haven't tried downgrading from 4.4.4 nor have tried flashing 4.4.4 via fastboot yet. Maybe you made some typo in your command lines.

mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
pause
mfastboot reboot
THIS IS WHAT I PASTED IN NOTEPAD AND SAVED AS .BAT FILE.....any corrections plz.....i tried doing ur stuff while i was running 4.4.2 rooted.....what can be causing this tuck on bootloop
---------- Post added at 11:56 PM ---------- Previous post was at 11:16 PM ----------
==vj== said:
Easier way would be to Grab the OTA package of 4.4.4 and update it via stock recovery. Provided you need to on 4.4.2 unrooted and unaltered status.
I haven't tried downgrading from 4.4.4 nor have tried flashing 4.4.4 via fastboot yet. Maybe you made some typo in your command lines.
Click to expand...
Click to collapse
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
pause
mfastboot reboot
THIS IS WHAT I PASTED IN NOTEPAD AND SAVED AS .BAT FILE.....any corrections plz.....i tried doing ur stuff while i was running 4.4.2 rooted.....what can be causing this tuck on bootloop........two problems that i feel can be causing this are there are a few folders other than the main folder in the firmware which are not extracted by me into the root folder may be that is causing this or may be i need to unroot before doing all this....any help..... very grateful for ur response

[Help] Phone Bootloop

Hi guys, so i flashed a Moto G GPE rom onto my phone, got sick of seeing 3G rather then H or H+ and have decided to move back to Stock Retail.
I have a problem though when i use the guide on the FAQ ( the mfastboot way) everything i flash gets the okay appart from the system spasrsechunks? that gets some sort of error and it says error okay? Well apart from that after i reboot the phone, it has the warning sign but then uses the google bootanimation? ive left it on a good couple of minutes to see if it will boot but it doesnt seeem to want to..

Clarkiieh said:
Hi guys, so i flashed a Moto G GPE rom onto my phone, got sick of seeing 3G rather then H or H+ and have decided to move back to Stock Retail.
I have a problem though when i use the guide on the FAQ ( the mfastboot way) everything i flash gets the okay appart from the system spasrsechunks? that gets some sort of error and it says error okay? Well apart from that after i reboot the phone, it has the warning sign but then uses the google bootanimation? ive left it on a good couple of minutes to see if it will boot but it doesnt seeem to want to..
Click to expand...
Click to collapse
Google animation means that you still have the gpe rom on your phone. This happened to me before when i flashed the GPE rom too. What you need to do is flash your firmware again. Download the stock firmware form this guide: http://forum.xda-developers.com/showthread.php?t=2542219 Then what you need to do is run these commands MANUALLY! As in 1 by 1.
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk1
fastboot flash system system.img_sparsechunk2
fastboot flash system system.img_sparsechunk3
fastboot erase cache
fastboot erase userdata
fastboot oem fb_mode_clear
Click to expand...
Click to collapse

Yeah I sorted it thanks no 4.4.2 ROM would work trued multiple times until I tries a 4.3 and downgraded then it worked and updated to 4.4.2 ora
Sent from my XT1032 using Tapatalk

Moto G (2013) GPE 5.0.1 to Motorola´s 5.0.2

Hello guys, I´m in doubt here, and although i´ve been reading some posts, I cannot seem to understand the procedure to install Motorola´s 5.0.2 in my Moto G, actually on 5.0.1 GPE.
As far as I know, I need to wipe it off, then convert partitions to f2fs and then flash via custom recovery?
I´ve tried twice, but cannot install TWRP, will try with Phillz.
BTWy, my device is rooted and bootloader unlocked.
Thanx for any guidance you may lend me, I´m at work and cannot dwelve deep into hundreds of threads. I have already downloaded Blur_Version.210.12.40.falcon_umts.Brasil.en.BR.zip the official Motorola 5.0.2.
Thanks!!

you need the 4.4.4 firmware first and mfastboot v2 files to go back to stock motorola firmware.
and since you updated to 5.0.1 GPE, your bootloader has been updated, so when you downgrade to 4.4.4, you will see screen flickers.
Here are the commands,you must enter these commands one by one using command prompt (hold shift, and right click and choose open command window here) in the folder where the firmware files are (including the mfastboot files)
connect your phone to the computer with usb cable and type the command to go into the bootloader
adb reboot bootloader
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot reboot
and you need this firmware to be installed first before installing the lollipop update
XT1032_RETAIL-BR-SS_4.4.4_KXB21.14-L1.40_42_cid12_CFC_1FF

Thanx!
Well thank.you sir, very informative response.
Just to be super super-sure, no need to un-root or lock the bootloader right?
AgentChaos said:
you need the 4.4.4 firmware first and mfastboot v2 files to go back to stock motorola firmware.
and since you updated to 5.0.1 GPE, your bootloader has been updated, so when you downgrade to 4.4.4, you will see screen flickers.
Here are the commands,you must enter these commands one by one using command prompt (hold shift, and right click and choose open command window here) in the folder where the firmware files are (including the mfastboot files)
connect your phone to the computer with usb cable and type the command to go into the bootloader
adb reboot bootloader
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot reboot
and you need this firmware to be installed first before installing the lollipop update
XT1032_RETAIL-BR-SS_4.4.4_KXB21.14-L1.40_42_cid12_CFC_1FF
Click to expand...
Click to collapse

Hello guys I would like to do the same, I have the Gpe and install Motorola 5.0.2, but before I want to know how to fix the flicker screen, I don't get it using android but when I'm on twrp, it's annoying, do you have any idea how to fix it?
Sent from my XT1058 using XDA Premium 4 mobile app

nice!
So i´ve flashed 5.0.2, with the method described here, it was *too* easy.
I did not, how ever, get the flickering screen bug...
So thanks again. and this is a safe way to go from gpe 5.0.1 to moto 5.0.2.

donlloreda said:
So i´ve flashed 5.0.2, with the method described here, it was *too* easy.
I did not, how ever, get the flickering screen bug...
So thanks again. and this is a safe way to go from gpe 5.0.1 to moto 5.0.2.
Click to expand...
Click to collapse
Which recovery do you have?

antarix said:
Which recovery do you have?
Click to expand...
Click to collapse
Stock recovery mate, well my happy story has come to a misterious error I cannot by any means sort out..
please see this post: Weird issue