Hi, when i try to restaure my stock rom ( GT-P5100 XEF 4.2.2) i get 2 great problems :
1) i can't access to settings ( setting icon doesn't appear)
2) can't get 3g connection.
NB: i've tried all costum recoveries ( philz, twrp,...) to do a back up and get the same problems every time
Help please and sorry for my bad english
who can help me??!!!
Related
Hello, sorry for the spelling, but I'm french, I started a bit in the rom I got a root xperia xperia with my superclik xrecovery and I use to install the rom, but my problem is that after installing my laptop has no network to other rom it's the same .. I installed the rom Froyo Freex10 and with that I have the network .. when I tried to go into the network setting but could not solve my problem could you help me thank you in advance
http://forum.xda-developers.com/showthread.php?t=1009220
resolved
its ok
go to dev tools – bad behavior – crash system server
Phone will reboot and voilá
Dears,
I have a very annoying problem , i hav HTC Desire S with specs as below in the pic ,, the only rom installed and working well in Reaper v 2.1 based on CM 7
All other Roms and i mean it ,, is flashed well and i can open it normally but always i find what makes make annoyed >> " All Modems are nearly off "
- Wifi error
- bluetooth no working
- my carrier not working and i can't make a call " the signal appear with cross as being offline "
please help me , as i need to upgrade my rom badly
Do you flash the boot.img from the ROM after each flash??
Here's how - http://forum.xda-developers.com/showpost.php?p=19071114&postcount=37
Many thanks for you , i just thought that flashing the boot.img in the first time only will fit
thanks very much , it worked well
Remember, you need to flash it every time you flash a ROM. In most cases, it won't boot at all without flash. Sometimes, it may boot but you'll experience the issues you did right now.
Hello,
can i install this rom on my optimus 3d
ICS 4.0.4 Custom Full 3D ROM
os 2.2.2
baseband l6260_modem_sic_01,1042
kernel 2,6,35,7
broj vrzije frg83g
ver softvera lg920-v10d-jul-08-2011
so far I've already installed the Acura Team 3D, LiquidBeats V3.0, KING_3D_ROM and on any i dont hawe network : (
I did successfully return to the old version
but my mob working bad , and I therefore like to change to ICS 4 rom
but I fear that it will again be without success, and I'll just lose time with no success
so I would like to say that if anyone can make this or any other rom instead factory rom
Not to forget that I bought phone in the operator store Telenor Serbia
p.s.
Sorry for bad English
Today I tried to install .. and installation and start at about 15% said that everything is ok successfully installed and reset the mob stuck on lg logo
what to do please help
Try this:
http://forum.xda-developers.com/showthread.php?t=1244490
not so in general .. I went through zipa on the SD card ..
I hold power and volume, and when I go to open the instal rom from sd
sombadi help plz
It's the same problem as mine . But me 27 % stuck in it .
I tried smart flsher and it worked . I do not how did it do it . but it worked . And now my phone ICS
Sent from my LG-SU760 using xda app-developers app
Zlocesti said:
Hello,
can i install this rom on my optimus 3d
ICS 4.0.4 Custom Full 3D ROM
os 2.2.2
baseband l6260_modem_sic_01,1042
kernel 2,6,35,7
broj vrzije frg83g
ver softvera lg920-v10d-jul-08-2011
so far I've already installed the Acura Team 3D, LiquidBeats V3.0, KING_3D_ROM and on any i dont hawe network : (
I did successfully return to the old version
but my mob working bad , and I therefore like to change to ICS 4 rom
but I fear that it will again be without success, and I'll just lose time with no success
so I would like to say that if anyone can make this or any other rom instead factory rom
Not to forget that I bought phone in the operator store Telenor Serbia
p.s.
Sorry for bad English
Click to expand...
Click to collapse
first of all you have to change the BASEBAND and the ROM.
FLASHING ZIP ROM with CWM will NOT change your ROM from version to version (2.2 ->2.3 -> 4.0) !!!!
Once you install OVER THE COMPUTER your ROM (in KDZ or FLS+BIN) then you can play with custom roms.
so if you did this before install Acura ICS rom then proibabvly you lost you IMEI.
this check when you write on your dial pad *#06#
if it is empty - you should restore it - check the developer section how to do that.
I'm just so lost imei. Then I did a restore and everything was like when I bought the mob. Then am via CWM intall king rom and everything worked but I not have network. so I did restore again and now my phone is terribly slow. I'd like to install ics rom .. so if you could explain to me in detail how to make a switch or a link where what to do. as the phone was bought in the mobail operator and is SIM lock
Zlocesti said:
I'm just so lost imei. Then I did a restore and everything was like when I bought the mob. Then am via CWM intall king rom and everything worked but I not have network. so I did restore again and now my phone is terribly slow. I'd like to install ics rom .. so if you could explain to me in detail how to make a switch or a link where what to do. as the phone was bought in the mobail operator and is SIM lock
Click to expand...
Click to collapse
If you want to install gingerbrad ROM's you must update your phone to gingerbread, you can do this with official LG program or with kdz installer http://forum.xda-developers.com/showthread.php?t=1287236 and then install rom.Or if you want to install xbsall ICS port go http://forum.xda-developers.com/showthread.php?t=1956347.
Gutted Mate!!
But you Cannot UPGRADE from GingerBread ( Thats what you Had on phone originally ) To ICS through your phone using Clockwork Mod
your phone will try, but you will just end up confusing it like you have done,
http://forum.xda-developers.com/showthread.php?t=1956347
follow this thread and read every post from Page 1, then read all post in links to other helpfull threads like this one
http://forum.xda-developers.com/showthread.php?t=1244490
i found this helped
http://forum.xda-developers.com/showthread.php?t=1942836
but tbh i cant really stress enough,, that you need to read read read lol,, and if still not sure read some more :good:
Good Luck buddy
@Mikyno
First of all, big thanks for your work, your ROM is great!
Now, to the questions part. First time I upgraded to Gnabo Rom V2 from stock 4.1.2, and I did't change bootloader. I just flashed from CWR Gnabo V2 ROM + SU, so after the reboot Wi-Fi detected networks but couldn't connect. Then I flashed Wi-Fi-Fix for N8013 (http://forum.xda-developers.com/atta...7&d=1401120355) and everything was fixed and worked almost perfectly (could not start(find) Wi-Fi-access point to share 3G-internet).
Now, as V3 was released, I tried the same route, but it was different from the start - I couldn't even activate Wi-Fi, and above-mentioned Fix did nothing.
Questions are:
1) Do I have to update the bootloader to make Wi-Fi work with V3 ?
2) What version of bootloader I need to use for my N8000 ?
3) Will it be possible to downgrade(restore from backup) back to 4.1.2 with the new bootloader ?
4) Will it be possible to restore the old stock bootloader after using the new one ?
5) Does Wi-Fi access point work on Gnabo V3 ?
1) No you do not need to update bootloader
But you do need to install the WiFi fix and also the kernel for v3 in order to allow the wifi to work.
Stratos
stratism said:
1) No you do not need to update bootloader
But you do need to install the WiFi fix and also the kernel for v3 in order to allow the wifi to work.
Stratos
Click to expand...
Click to collapse
Thanks for the answer.
In the Gnabo V3 topic there is a link to kernel (http://forum.xda-developers.com/attachment.php?attachmentid=2764247&d=1401120355) , but it somehow confusing: the file name states, that it is for N8000 (Stock-GT-N8000-leaked-KK-Boot.img-CWR-installer.zip), but then there's a description for this link there, and it says "Kernel for N8013 (and N8010 maybe?)".
In the Gnabo ROM topic people always mention this link for N8010 and N8013 ... Is it OK to use that kernel for N8000 ?
Also, please help me understand - flashing the kernel is only affecting the ROM-part ? If I flash it, will it be possible to restore old backups (made from CWR) ? It's the "Boot.img" part of the file name that bothers me. I somehow afraid that if it changes bootloader it will be impossible to restore from older backups (made with the stock loader). I really hope that my concerns are unfounded, but I'd like to be sure
Chieftain486 said:
Thanks for the answer.
In the Gnabo V3 topic there is a link to kernel (http://forum.xda-developers.com/attachment.php?attachmentid=2764247&d=1401120355) , but it somehow confusing: the file name states, that it is for N8000 (Stock-GT-N8000-leaked-KK-Boot.img-CWR-installer.zip), but then there's a description for this link there, and it says "Kernel for N8013 (and N8010 maybe?)".
In the Gnabo ROM topic people always mention this link for N8010 and N8013 ... Is it OK to use that kernel for N8000 ?
Also, please help me understand - flashing the kernel is only affecting the ROM-part ? If I flash it, will it be possible to restore old backups (made from CWR) ? It's the "Boot.img" part of the file name that bothers me. I somehow afraid that if it changes bootloader it will be impossible to restore from older backups (made with the stock loader). I really hope that my concerns are unfounded, but I'd like to be sure
Click to expand...
Click to collapse
That is correct. You can use the kernel for N8010. I do also have the N8010 but somehow it is "shown as" N8013...
Hey!
First of all, this post will be too hard to write because of my English.
I had decided to improve the performance of my Fame a long time ago (I have to clarify that I'm a noob at flashing roms and doing related stuff). So I flashed Galaxy Fame - Stock deodexed and it worked perfect.
After a while my cell phone became slow again so I installed Cyanogenmod 12.1. I didn't like that rom due to the bugs and performance.
So I wiped the data/cache/dalvik and re-flashed the previous deodexed rom again.
What's the problem? It boots and stays in the "s6810L" screen for a few seconds, then reboots and stays in that screen again for a few seconds and THEN it shows the CWM recovery menu.
I haven't tried another rom yet, but I want to know why it didn't work this time... I really like the deodexed rom because it's so smooth and fast.
What am I doing wrong?
I'm sorry for my english again, thanks in advance, and regards!
Edit #1: I'm using this CWM
Hi !
When flashing roms a factory reset is recommended especially when flashing between 2 totally different based roms , cyanogen / stock
My advice is to use odin and revert to stock , don`t flash via recovery
Also , I can move this thread to the designated location if you continue to have problems and the solution I suggested doesn`t work , there may be more users with the same device.
Use the same thread you have linked above to get the firmware
Good luck and let me know !