Hello, sorry for the spelling, but I'm french, I started a bit in the rom I got a root xperia xperia with my superclik xrecovery and I use to install the rom, but my problem is that after installing my laptop has no network to other rom it's the same .. I installed the rom Froyo Freex10 and with that I have the network .. when I tried to go into the network setting but could not solve my problem could you help me thank you in advance
http://forum.xda-developers.com/showthread.php?t=1009220
resolved
its ok
go to dev tools – bad behavior – crash system server
Phone will reboot and voilá
Related
Guys im really worried wt to do....
i had xperia x10 mini pro with android 2.1
i rooted and flashed it with cyanogenmod7 v3.4
bt the radio wsnt wrking so i again flashed it with MiniCM Beta 2
after i rebooted cell from xrecovery once the flashing of MiniCM was done i cant access the touchscreen i.e it says touch the android to begin but when i touch nothing happens.....and also now i cant even go to xrecovery....i tried many times.....someone please help :'(
I would suggest just repairing (i.e. completely reinstalling) your phone using Sony Ericsson's PC Companion or Update Service utility.
What it does is wipe out everything and install a fresh default operating system. Then take it from there.
Would suggest using FlashTool if you want to root the device and install XRecovery. Its an all in one solution for beginners who want to root and do all the nerdy stuff Just search for it on the XDA forums.
Hope this helps. Good luck
Hello,
can i install this rom on my optimus 3d
ICS 4.0.4 Custom Full 3D ROM
os 2.2.2
baseband l6260_modem_sic_01,1042
kernel 2,6,35,7
broj vrzije frg83g
ver softvera lg920-v10d-jul-08-2011
so far I've already installed the Acura Team 3D, LiquidBeats V3.0, KING_3D_ROM and on any i dont hawe network : (
I did successfully return to the old version
but my mob working bad , and I therefore like to change to ICS 4 rom
but I fear that it will again be without success, and I'll just lose time with no success
so I would like to say that if anyone can make this or any other rom instead factory rom
Not to forget that I bought phone in the operator store Telenor Serbia
p.s.
Sorry for bad English
Today I tried to install .. and installation and start at about 15% said that everything is ok successfully installed and reset the mob stuck on lg logo
what to do please help
Try this:
http://forum.xda-developers.com/showthread.php?t=1244490
not so in general .. I went through zipa on the SD card ..
I hold power and volume, and when I go to open the instal rom from sd
sombadi help plz
It's the same problem as mine . But me 27 % stuck in it .
I tried smart flsher and it worked . I do not how did it do it . but it worked . And now my phone ICS
Sent from my LG-SU760 using xda app-developers app
Zlocesti said:
Hello,
can i install this rom on my optimus 3d
ICS 4.0.4 Custom Full 3D ROM
os 2.2.2
baseband l6260_modem_sic_01,1042
kernel 2,6,35,7
broj vrzije frg83g
ver softvera lg920-v10d-jul-08-2011
so far I've already installed the Acura Team 3D, LiquidBeats V3.0, KING_3D_ROM and on any i dont hawe network : (
I did successfully return to the old version
but my mob working bad , and I therefore like to change to ICS 4 rom
but I fear that it will again be without success, and I'll just lose time with no success
so I would like to say that if anyone can make this or any other rom instead factory rom
Not to forget that I bought phone in the operator store Telenor Serbia
p.s.
Sorry for bad English
Click to expand...
Click to collapse
first of all you have to change the BASEBAND and the ROM.
FLASHING ZIP ROM with CWM will NOT change your ROM from version to version (2.2 ->2.3 -> 4.0) !!!!
Once you install OVER THE COMPUTER your ROM (in KDZ or FLS+BIN) then you can play with custom roms.
so if you did this before install Acura ICS rom then proibabvly you lost you IMEI.
this check when you write on your dial pad *#06#
if it is empty - you should restore it - check the developer section how to do that.
I'm just so lost imei. Then I did a restore and everything was like when I bought the mob. Then am via CWM intall king rom and everything worked but I not have network. so I did restore again and now my phone is terribly slow. I'd like to install ics rom .. so if you could explain to me in detail how to make a switch or a link where what to do. as the phone was bought in the mobail operator and is SIM lock
Zlocesti said:
I'm just so lost imei. Then I did a restore and everything was like when I bought the mob. Then am via CWM intall king rom and everything worked but I not have network. so I did restore again and now my phone is terribly slow. I'd like to install ics rom .. so if you could explain to me in detail how to make a switch or a link where what to do. as the phone was bought in the mobail operator and is SIM lock
Click to expand...
Click to collapse
If you want to install gingerbrad ROM's you must update your phone to gingerbread, you can do this with official LG program or with kdz installer http://forum.xda-developers.com/showthread.php?t=1287236 and then install rom.Or if you want to install xbsall ICS port go http://forum.xda-developers.com/showthread.php?t=1956347.
Gutted Mate!!
But you Cannot UPGRADE from GingerBread ( Thats what you Had on phone originally ) To ICS through your phone using Clockwork Mod
your phone will try, but you will just end up confusing it like you have done,
http://forum.xda-developers.com/showthread.php?t=1956347
follow this thread and read every post from Page 1, then read all post in links to other helpfull threads like this one
http://forum.xda-developers.com/showthread.php?t=1244490
i found this helped
http://forum.xda-developers.com/showthread.php?t=1942836
but tbh i cant really stress enough,, that you need to read read read lol,, and if still not sure read some more :good:
Good Luck buddy
Hi please help me for data connection in android 4.1.x or 4.2.x rom' in 4.0.4 roms data connecting automatically.
But in JB roms data is not connecting. I manually added APN's Still not connecting
I have facing this problem in
1) EvoKing1.6-20130224-4.2.2-p500
2) p500_PAC_JB_4.2.2-v20.0.0_27FEB2013-150809
3) aokp_p500_unofficial-bytecode_Feb-17-13_milestone1-FINAL
please help me to solve this
i don't understand.... y0u get the prob with the official android or the custom rom? please elaborate a bit so that someone can understand...
Did you trim the JB roms before flashing? No space in the system partitions could be a factor to your issue...
Sent from my LG-P500
Thanks
HI @alicarbovader , @pmvyas,
Thanks for your quick reply, i have found the solution
The APN were not added default, i have taken APN backup in 4.0.4 ROM (Rasheed's) from APN Backup restore pro and restored it.
After flashing JB Rom then connected to the mobile data.
[Q] Is there any way to get GSM network to work on cyanogen based Alien rom, in xperia j?
I just rooted my Xperia J 4.1.2 (.31) yesterday and went ahead with AVD which supposed to be based on stock xperia rom. But unfortunately its was a bit buggy. SystemUI.apk suddenly stops working and many apps kept crashing on me .. few other roms like slim were asking to be downgraded to ICS which i dont want to... then came Alien rom to my rescue. this rom is really clean not to mention the Acid Audio ENgine and stuff ...T____T I so badly want to keep this rom its ****ing perfect..!!! if only if the GSM would work, which while installing i didn't know that no cyanogenmod 10 based rom has GSM support !
Now i'm whining here because i just want someone more knowledgeable than me to give me the confirmation that that i have absolutely no other choice, other than going back to the AVD. LIke the GSM fix for the ICS baseband is there positively NOTHING out there for JB :crying:
You need to downgrade to ics first, then flash any cm10 based rom, or gsm.will not work.
Sent from my Xperia Miro
just one more doubt...
c4cyro said:
You need to downgrade to ics first, then flash any cm10 based rom, or gsm.will not work.
Sent from my Xperia Miro
Click to expand...
Click to collapse
getting out of alien rom and reinstalling AVD i screwd up and soft bricked my phone.
SO i had to use a pc to reflash the stock JB. BUt that has locked the bootloader again coz the PC companion can detect my phone again.
so just need to confirm certain things...
SO if i flash stock ICS then i will have to unlock my bootloader again right...? I presume i will have to root my phone too all over again... ? before installing the rom ?
PLease HELP!!!
Ok this is sooo irritating...!!! T____T
I flashed my phone with 4.0.4 ICS, st26i_11.0.a.3.18_global.ftf form Matej X's 4shared folder.
http://www.4shared.com/folder/25Mb7Dws/Xperia_J.html
the ST26i_11.0.A.7.5_CE.ftf from that folder when put into firmwares folder of flashtools, doesn't even show up !!!
i figured to root st26i_11.0.a.3.18_global.ftf from this guide http://http://forum.xda-developers.com/showthread.php?t=2033114&highlight=st26i+root+ics
but not inspite of downgrading to ics, when i installed MIUI5 rom i'm i'm getting no simcard ad hense GSM is not working all manually scanned networks are shown as "UNKNOWN" !
Now i have flashed back to stock ICS rom...
when i flast the stock rom using flashtool the simlock.ta file gets ignored. what's up with that, wherever i have read about its not supposed to be a issue...
Can someone help me this is really getting frustrating....
Can some one help me find the link for ST26i_11.0.A.7.5_CE.ftf ICS stock rom which will be detected by flashtool...
MIUI5 was really nice, I would like to use it. Its based on cyanogenmod10 fxp 226 ... My issue with that is i use the instruction here to install it, but its condusing.
https://sites.google.com/site/projectfreexperia/download/howto-install
It says "6.Wipe device
from cm9 device wipe is necessary only at first flash or when you switch cm version
!!! if after boot you experience ForceClose then is recomended to reboot to recovery and wipe device
7.Partition format
is not recomended to format your partitions unless you are advised to do otherwise"
Now in CWM what do i have to wipe...???
There are too many options to wipe....
1. wipe data/factory rest
2. wipe catch partition
Under advanced
Wipe delvic catch ...
Which and all am i supposed to wipe ?
Please bare with me guys i'm at my witt's end here...T____T
I just want one CM 10 based rom working for me... That's all ...
Here's the thing mate, AlienRom works perfectly fine for me. Just flash over stock ICS and Not JB and select Use 2G network on settings. Give it another try , oh and I highly discourage MIUI, it may look pretty but it is lag as hell. Browser takes sooo long to load and so lag
Racer X said:
Here's the thing mate, AlienRom works perfectly fine for me. Just flash over stock ICS and Not JB and select Use 2G network on settings. Give it another try , oh and I highly discourage MIUI, it may look pretty but it is lag as hell. Browser takes sooo long to load and so lag
Click to expand...
Click to collapse
Hey Racer X,
I was thinking about the same thing... Alien rom is the only rom where i encoutered absolutely "0" lag, Brilliant work there man thanks a lot.
Would it be possible to flash it directly on rooted 11.0.a.3.18 ICS because i'm not able to root ST26i_11.0.A.7.5_CE.ftf with any tutorial here...
SO far i have tried this guide http://forum.xda-developers.com/showthread.php?t=2071817
and the other option being flashing to stock 11.0.A.7.5 and using Unlockroot.exe
But windows won't even detect the exe file and Google chrome's calling it a malicious file and won't let me download it .
SO i have sort of hit a roadblock with 11.0.a.7.5
So i was hoping i can flash alien rom straight on rooted 11.0.a.3.18 ICS, which i rooted with this guide http://forum.xda-developers.com/showthread.php?t=2033114&highlight=st26i+root+ics
Omg...!!! I did it ... :d
OMG... I just went ahead and did it... this is sooo f****** AWWWWSOME...!!!
Now i have Alien rom with GSM WORKING !!!:good:
I didn't even go for 7.5 i just stuck with .18 and went to alien rom 4.1.2
BTW can i keep the cyanogenmod upates setting to weekly or should i keep it at manual/???
I don't want to loose the gms connection just coz it updated on its own ... ?
What do you think ?
Hi guys,my phone is xperia z3 dual (d6633), there's a problem with mobile data ,everything looks good APN ,internet settings ... I have used it before and it went well and I could use Internet but now it doesn't turn on and doesn't show LTE 3G or E like before, I wanna know if i it can be solved without flashing new ROM
It happened after installing busybox.once before a same problem had happened but it solved with flashing new ROM (installation of busybox was unsuccessful and I couldn't connect to wifi or mobile data,now its just mobile data and WiFi works well,it was working before installing busybox)
I guess the problem will be fixed with flashing new ROM but if there's another way please tell me, thanks.
HOSAEN said:
Hi guys,my phone is xperia z3 dual (d6633), there's a problem with mobile data ,everything looks good APN ,internet settings ... I have used it before and it went well and I could use Internet but now it doesn't turn on and doesn't show LTE 3G or E like before, I wanna know if i it can be solved without flashing new ROM
It happened after installing busybox.once before a same problem had happened but it solved with flashing new ROM (installation of busybox was unsuccessful and I couldn't connect to wifi or mobile data,now its just mobile data and WiFi works well,it was working before installing busybox)
I guess the problem will be fixed with flashing new ROM but if there's another way please tell me, thanks.
Click to expand...
Click to collapse
Duplicate thread....
Next time learn to wait instead of writing more threads with the same answer.
Thread closed.