Related
i tried everything [odin (using the cf-roots provided in tht other thread), androot, unlockroot and superonetouch]but i just cant get my phone rooted........
i have a samsung galaxy gt-i9003
firmware version - 2.3.6
baseband version - I9003DDKP4
kernel version - 2.6.35.7-CL882023 [email protected]#1
build number - GINGERBREAD.DDKP3
odin just gets stuck at "setup connection", for abt 2 hours (thts not supposed to happen i guess), so plz help me.
other apps just give the message "cant root your device"
Happened to me too...just change your usb cable...if not change usb port..it happens due improper connection n is hardware related..
Press thanks if that helpd
Sent from my GT-I9003 using XDA
loneagl said:
Happened to me too...just change your usb cable...if not change usb port..it happens due improper connection n is hardware related..
Press thanks if that helpd
Sent from my GT-I9003 using XDA
Click to expand...
Click to collapse
didnt work. i used 2 other cables, and another laptop. still stuck at "setup connection"
Try xxkpe.with pit file.it worked for me
Sent from my GT-I9003 using XDA
loneagl said:
Try xxkpe.with pit file.it worked for me
Sent from my GT-I9003 using XDA
Click to expand...
Click to collapse
plz elaborate....... (m a noob)
i know whats the problem your not flashing while in download mode. turn off your phone hold volume down then power then menu until download mode appeara. then connect to odin.
Sent from my GT-I9003 using XDA
---------- Post added at 06:20 PM ---------- Previous post was at 06:08 PM ----------
First install KIES, then odin. After that download bagaria.tar here
http://forum.xda-developers.com/showthread.php?t=1351056
go to download mode as i said above, connect to pc then open ODIN. Make sure the color of the box is YELLOW and there is Word "Added" in the log screen. Click PDA, then browse bagaria.tar. HOLLAAA.. )
marshygeek said:
i know whats the problem your not flashing while in download mode. turn off your phone hold volume down then power then menu until download mode appeara. then connect to odin.
Sent from my GT-I9003 using XDA
---------- Post added at 06:20 PM ---------- Previous post was at 06:08 PM ----------
First install KIES, then odin. After that download bagaria.tar here
http://forum.xda-developers.com/showthread.php?t=1351056
go to download mode as i said above, connect to pc then open ODIN. Make sure the color of the box is YELLOW and there is Word "Added" in the log screen. Click PDA, then browse bagaria.tar. HOLLAAA.. )
Click to expand...
Click to collapse
i am doing it in download mode. i m doin eveything as described in various other threads, but its still not working.........
Go to settings> application, development then check usb debugging mode then try again.
aritro88 said:
i tried everything [odin (using the cf-roots provided in tht other thread), androot, unlockroot and superonetouch]but i just cant get my phone rooted........
i have a samsung galaxy gt-i9003
firmware version - 2.3.6
baseband version - I9003DDKP4
kernel version - 2.6.35.7-CL882023 [email protected]#1
build number - GINGERBREAD.DDKP3
odin just gets stuck at "setup connection", for abt 2 hours (thts not supposed to happen i guess), so plz help me.
other apps just give the message "cant root your device"
Click to expand...
Click to collapse
I suggest you first flash your phone using Odin to XXKPE firmware. Then flash to XXKPQ/KPU (more stable). Download the root file for the installed firmware. You should be ok
Stock ROMs available here,
http://forum.xda-developers.com/showthread.php?t=1004647
rshankar said:
I suggest you first flash your phone using Odin to XXKPE firmware. Then flash to XXKPQ/KPU (more stable). Download the root file for the installed firmware. You should be ok
Stock ROMs available here,
http://forum.xda-developers.com/showthread.php?t=1004647
Click to expand...
Click to collapse
but i heard tht the experimental ROMS (XX series) hav a long list of bugs
marshygeek said:
Go to settings> application, development then check usb debugging mode then try again.
Click to expand...
Click to collapse
its obvious tht i hav done this. but it still dosent work
aritro88 said:
but i heard tht the experimental ROMS (XX series) hav a long list of bugs
Click to expand...
Click to collapse
Can you elaborate on what these bugs are? I'm using XXKPQ and I'm not facing any problems..
Sent from my i9003 with CM9
aritro88 said:
but i heard tht the experimental ROMS (XX series) hav a long list of bugs
Click to expand...
Click to collapse
No, thats not true. The only ones with bugs are the older roms. XXKPE is old but it's very stable with no bugs. Where did you hear that "XX series" roms are experimental? The "XX" or "DD" letters only indicate the region of the release. In this case "XX" roms are for europe while "DD" roms are for around India and some parts of Asia. However, you can still use roms like XXKPQ and XXKPU world-wide.
For your Rooting problem
Have you tried SuperOneClick? If not, just download the latest version and install. Then make sure debugging mode is ticked on your phone, open superoneclick and connect your phone. Just click Root and wait for phone to restart.
If you've already tried SuperOneClick, Then your best option is to install XXKPE with .pit file. Just follow the steps on this site and upgrade to DDKP3 or XXKPU, then try rooting your phone.
http://www.theinfomania.com/2012/04/28/how-to-upgrade-your-samsung-galaxy-sl-i9003-with-stock-roms-ddkp3-or-xxkpu/
Hope this helps, Cheers
plz help me guys, i am at it since 3 days now and i am still stuck
@The_GMAN - superoneclick isnt working at all
aritro88 said:
plz help me guys, i am at it since 3 days now and i am still stuck
@The_GMAN - superoneclick isnt working at all
Click to expand...
Click to collapse
Does the COM box turn yellow?
Sent from my GT-I9003 using XDA
remove your sd card while rooting.
Sent from my GT-I9003 using XDA
First thing you must install Samsung kies in you laptop and then install odin
Sent from my GT-I9003 using xda premium
Hi
Not sure if you're issue is fixed so I'll give my 2 cents.
Try cleaning the information of your USB devices using Drive Cleanup [use google ] assuming you have a Windows PC.
Then install latest Kies for latest USB drivers or if your PC is set to get drivers directly from the internet then updated drivers will be installed automatically once you attach your phone.
Hope this helps
aritro88 said:
plz help me guys, i am at it since 3 days now and i am still stuck
@The_GMAN - superoneclick isnt working at all
Click to expand...
Click to collapse
your phone still can on?
SOLVED
after soooooooo many days, my phone is finally rooted.
a friend intalled an XX series ROM and then rooted it, it worked fine. BUT the voice quality is dead now, its full of noise
guess ther's a package deal with everything these days
Guys --> M not a developer nor m too much into tech things..
I was reading alot about rooting phone & getting good (ICS) rom on my device (samsung i9003).
I have superoneclick with USB debugging on--> it stuck at step 7 & application freezes.
I have ODIN wid me....(dont knw what TAR..people are talking)...
I will be grateful if some one can help me...(stepwise direction will be a great help)..
Thanks
ok i just got this phone 4 days ago and i rooted it and everything i looked on here to see what apps where safe to delete , and it made my phone completely unstable
i just wanted to know if anyone has a nandroid backup i can access clockwork recovery but the phone wont go past it. i click factory reset and it says it did but i cant turn it on or reboot , so does anyone have a nandroid backup with all the preinstalled system apps ? for the samsung galaxy S blaze 4G ,
or at least a list of them , so i can look around and reinstall them to system memory, and make it stable, i need help my mom bought this retail , 500 $$$ as a birthday present , and where not on the wealthy side her heart would break if she found out i broke it . please i need help all be forever greatfull reply soon . :'(
This should be in the general section.
Sent from my SGH-T769 using Tapatalk 2
Nevermind. Hopefully you figure it out. ALWAYS DO A BACKUP BEFORE ROOTING/FLASHING!!
Sent from my SGH-T769 using XDA
Dude download a rom and flash it. Why all the fuss
Sent from my SGH-T989 using XDA
Did you read the thread below?
http://forum.xda-developers.com/showthread.php?t=1591601
wrong section
1. Flash a rom either reviewers or mine as tthose are the only two working atm.
2. Odin back to stock?
3. Use amarullez cwm file manager and push back whatever apps u deleted.
sent from my batcave
because
i want to be able to get the ics update . : \
i have nandroid backup from right after i rooted phone but am still new. i will help if someone can help me help you. samsung galaxy s blaze right.
ricanboss said:
i want to be able to get the ics update . : \
Click to expand...
Click to collapse
What ICS update, we don't have an ETA yet?
Sent from my SGH-T769 using Tapatalk
Just restore back to stock firmware using Odin. You need to download a file called SGH-T769-UVLB7-hitsquad.tar and blaze.pit, load those up in Odin and unselect all options except Reboot. And carefully make sure Repartition is unchecked as well.
@ mudmachine2929
can u please upload the nadroid back up please oh please it would mean so much and yes i have a samsung galaxy S blaze 4G if yu need anymore info my email is [email protected] mudmachine2929 your my only hope !!!
AND THANK YOU EVERYONE ELSE FOR YOU THOUGHTS !!
mudmachine2929 said:
i have nandroid backup from right after i rooted phone but am still new. i will help if someone can help me help you. samsung galaxy s blaze right.
Click to expand...
Click to collapse
can you please upload it for me it would mean soo much to me please oh please and do you have instructions on how to flash it? please your my only hope. email me if you need anything else [email protected]
Sleeps17 said:
Just restore back to stock firmware using Odin. You need to download a file called SGH-T769-UVLB7-hitsquad.tar and blaze.pit, load those up in Odin and unselect all options except Reboot. And carefully make sure Repartition is unchecked as well.
Click to expand...
Click to collapse
when i download it an move it to my computer memory it dosnt say SGH-T769-UVLB7-hitsquad.tar : \ should it come in a zip file ?
ricanboss said:
when i download it an move it to my computer memory it dosnt say SGH-T769-UVLB7-hitsquad.tar : \ should it come in a zip file ?
Click to expand...
Click to collapse
yes unzip it and there should be a tar inside of it that's what odin uses to flash ur phone
Hi Friends,
I'm using Galaxy Fit which runs Chocobread V 3.20. I feel Chocobread is litte bit slow. You guys please help me to revert back of stock rom(I'm From India). Kindly explain the way in detail.
Thanks in advance
Regards,
B Balamurali
balamurali said:
Hi Friends,
I'm using Galaxy Fit which runs Chocobread V 3.20. I feel Chocobread is litte bit slow. You guys please help me to revert back of stock rom(I'm From India). Kindly explain the way in detail.
Thanks in advance
Regards,
B Balamurali
Click to expand...
Click to collapse
Install stock ROM with Odin Multi Downloader for Galaxy Fit S5670. Download Beni 1.0.ops.
Download stock ROM for India from here:
http://www.sammobile.com/firmware/
Turn off cell phone. Push the Power, Home and Down button together. When the yellow triangle, connect cell phone and a computer with a USB cable.
so... just flash it,, like flashing a stock rom (that cannot be upgrade via KIES) or like flashing CWM using ODIN? even if i already convert the file system to ext 4. coz for CWM 5 not support RFS system (like creed rom) No bootloop will happend?
-----edit------
just readed here http://forum.xda-developers.com/showthread.php?t=1711857 i'll give it a shot...
zack_rains said:
so... just flash it,, like flashing a stock rom (that cannot be upgrade via KIES) or like flashing CWM using ODIN? even if i already convert the file system to ext 4. coz for CWM 5 not support RFS system (like creed rom) No bootloop will happend?
-----edit------
just readed here http://forum.xda-developers.com/showthread.php?t=1711857 i'll give it a shot...
Click to expand...
Click to collapse
*****
sir, I am not tech savvy. can you explain in details with the files needed?
Thanks,
Balamurali
balamurali said:
*****
sir, I am not tech savvy. can you explain in details with the files needed?
Thanks,
Balamurali
Click to expand...
Click to collapse
first you need beni.ops file.. (just google it and download)
and for the firmware either you require a "one package file"(.tar)
or 4 different files BOOT,PHONE,CSC,PDA. You can get a firmware for fit from sammobile.com
last thing you need is ODIN multidownloader 4.38 for fit or later..
open odin.exe
tick onepackage if you have a single .tar firware file.
if you have four files then you need to carefully place respective file in respective option in "select image to download" section of ODIN. leave EFS empty.
Click on start and wait till your phone boots.
Alright! Im back to stock rom
Sent from my GT-S5670 using xda app-developers app
Stock Firmware For Cyprus
Hello!!
Do you know if there is available firmware for Cyprus???
I was looking to google but i didnt find anything
THANKS (Sorry for my bad english)
thats work dude thnx
I want to return to stock firmware after i install the "cm-10.2-20131012-EXPERIMENTAL-beni" but i can't find anywhere where i can download the latest 2.3.6 stock firmware has this mobile phone.
How i can find out which stock 2.3.6 firmware has this phone?
I don't know if it helps
s5670xwkt6
has it now.
Please HELP ME.
fits79 said:
I want to return to stock firmware after i install the "cm-10.2-20131012-EXPERIMENTAL-beni" but i can't find anywhere where i can download the latest 2.3.6 stock firmware has this mobile phone.
How i can find out which stock 2.3.6 firmware has this phone?
I don't know if it helps
s5670xwkt6
has it now.
Please HELP ME.
Click to expand...
Click to collapse
All the stock firmwares are available on www.sammobile.com/firmwares/
Harpratap said:
All the stock firmwares are available on www.sammobile.com/firmwares/
Click to expand...
Click to collapse
NO IT ISN'T.
Have you try to download any firmware for that site lately???
ALL THE FILES where uploaded to hotfile.com and now you can't download any of that so....
fits79 said:
NO IT ISN'T.
Have you try to download any firmware for that site lately???
ALL THE FILES where uploaded to hotfile.com and now you can't download any of that so....
Click to expand...
Click to collapse
The youtube link that I posted has mirrors to the same file.
Just google if you can't find. There are plenty of links available! :silly:
Which exactly rom i must download and install so the phone has the factory android 2.3.6?
Is that file correct from my gt-s5670?
I install it as one package file with odin program exist in that package as it show at the video and then i make the two clear choices from recovery menu.
THANKS
Happy Flashing
fits79 said:
Which exactly rom i must download and install so the phone has the factory android 2.3.6?
Is that file correct from my gt-s5670?
I install it as one package file with odin program exist in that package as it show at the video and then i make the two clear choices from recovery menu.
THANKS
Click to expand...
Click to collapse
Hi @fits79
You can find the required ODIN Firmware Package as you wish for the ODIN tool
http://www.sammobile.com/firmwares/ and put in the Device Model Number and download it
or complete Firmware Package of Gingerbread 2.3.6 DDKT3 you can find the link below
http://hotfile.com/dl/146050815/b3b9...2_INU.zip.html in case this link doesn't work please download the Packages from above link as I can't check it from my office so dntmnd
For ODIN Flashing Tool:
http://www.downloads.techdiscussion....ting-software/
and Procedure to Flash is:
- Shutdown Galaxy Fit and restart it in Recovery Mode. For that hold the volume down key + Home key and power key. Hold it for some seconds and leave it. The device will boot in recovery mode. When the yellow triangle, connect cell phone and a computer with a USB cable.
- Launch ODIN on your system. In that look under ID:COM section. The section will turn to yellow once the device is connected and detected.
- Now click on OPS. It will ask you to browse the downloaded firmware package. Browse to GIO_1.0.ops. Once it is selected click on One Package and choose S5670DDKT3_S5670ODDKT2_S5670DDKT2_HOME.tar.md5.
- Now click on Start. The update process has started and it will take few minutes to complete.
- Once it is done, the device will reboot itself. Later on you can go in Settings and checkout the firmware version.
:good::fingers-crossed:
Dead link
Everyone gives the same HotFile dead link.I google it to get some more link options but every single one has finally reached the same dead link.
Come on guys! I need that 1.0 ops file! It's not available on the internet right now.
mericturkbikmaz said:
Everyone gives the same HotFile dead link.I google it to get some more link options but every single one has finally reached the same dead link.
Come on guys! I need that 1.0 ops file! It's not available on the internet right now.
Click to expand...
Click to collapse
Meriç bro now(şimdi) its cloosed from ABD hotfile
Abhishek_DK said:
Hi @fits79
You can find the required ODIN Firmware Package as you wish for the ODIN tool
http://www.sammobile.com/firmwares/ and put in the Device Model Number and download it
or complete Firmware Package of Gingerbread 2.3.6 DDKT3 you can find the link below
http://hotfile.com/dl/146050815/b3b9...2_INU.zip.html in case this link doesn't work please download the Packages from above link as I can't check it from my office so dntmnd
For ODIN Flashing Tool:
http://www.downloads.techdiscussion....ting-software/
and Procedure to Flash is:
- Shutdown Galaxy Fit and restart it in Recovery Mode. For that hold the volume down key + Home key and power key. Hold it for some seconds and leave it. The device will boot in recovery mode. When the yellow triangle, connect cell phone and a computer with a USB cable.
- Launch ODIN on your system. In that look under ID:COM section. The section will turn to yellow once the device is connected and detected.
- Now click on OPS. It will ask you to browse the downloaded firmware package. Browse to GIO_1.0.ops. Once it is selected click on One Package and choose S5670DDKT3_S5670ODDKT2_S5670DDKT2_HOME.tar.md5.
- Now click on Start. The update process has started and it will take few minutes to complete.
- Once it is done, the device will reboot itself. Later on you can go in Settings and checkout the firmware version.
:good::fingers-crossed:
Click to expand...
Click to collapse
Its not GIO_1.0.ops.
Its BENI_v1.0.ops
all files r very important so always save those important file
Please help !
Update media please wait
E:Con t mount /dev/block/mmcblkop1
( No such file or directory )
E: copy_dbdata_media : Can t mount SDCARD :
your storage not prepard yet.please use Ui me
nu for format and reboot actions .
copy default media content failed..
i flash cm10.1 and is failed
View attachment 1821265
0988846477 said:
Please help !
Update media please wait
E:Con t mount /dev/block/mmcblkop1
( No such file or directory )
E: copy_dbdata_media : Can t mount SDCARD :
your storage not prepard yet.please use Ui me
nu for format and reboot actions .
copy default media content failed..
i flash cm10.1 and is failed
View attachment 1821265
Click to expand...
Click to collapse
I dont understand man... after it is said like 10000 times on forum and still you ignore the fact you cannot flash via samsung stock recovery... you need a custom recovery like CWM to flash a custom ROM..
anyways lets just bring you phone back...
*Download ODIN http://dl.xda-developers.com/attachd...din3-v1.85.zip
*Also download any gingerbread stock ROM (http://hotfile.com/dl/145857619/8242...Q_SER.zip.html
Pass: sampro.pl)
*Install Samsung USB drivers.
*Put your phone into download mode by pressing Volume down+Home+Power key...
*Open ODIN and select the downloaded stock ROM (PDA only)
*Now connect your phone to pc via usb cable (you should see a com port turned yellow in ODIN which means your phone is detected by ODIN).
*Click start and wait till it says it PASSED
*Reboot your phone.
*Find the proper instruction to root your phone and how to flash a custom recovery.Then install a Custom ROM of your choice(read the authors installing instructions first and proceed)
I think he not flashing zip.
He have corrupted mmc chip.
Sent from my GT-I9003 using Tapatalk 2
mustafahussain said:
*Download ODIN http://dl.xda-developers.com/attachd...din3-v1.85.zip
*Also download any gingerbread stock ROM (http://hotfile.com/dl/145857619/8242...Q_SER.zip.html
Click to expand...
Click to collapse
Hi
I'm trying to restore my phone because it doesn't start any more after latest update of CM 10.1 (nor normal boot nor recovery mode) so I want to try to reinstall stock rom, but your links are broken can you post the correct ones? thank you
EDIT
Found links by myself
Can I try the procedure, anyway?
Flashing and change android version 2.2.1 Froyo to android 2.3.6 GB
mustafahussain said:
I dont understand man... after it is said like 10000 times on forum and still you ignore the fact you cannot flash via samsung stock recovery... you need a custom recovery like CWM to flash a custom ROM..
anyways lets just bring you phone back...
*Download ODIN http://dl.xda-developers.com/attachd...din3-v1.85.zip
*Also download any gingerbread stock ROM (http://hotfile.com/dl/145857619/8242...Q_SER.zip.html
Pass: sampro.pl)
*Install Samsung USB drivers.
*Put your phone into download mode by pressing Volume down+Home+Power key...
*Open ODIN and select the downloaded stock ROM (PDA only)
*Now connect your phone to pc via usb cable (you should see a com port turned yellow in ODIN which means your phone is detected by ODIN).
*Click start and wait till it says it PASSED
*Reboot your phone.
*Find the proper instruction to root your phone and how to flash a custom recovery.Then install a Custom ROM of your choice(read the authors installing instructions first and proceed)
Click to expand...
Click to collapse
Hi Mustafa.
I´m new in this forum.
u r senior member, and maybe u can help me ( sorry about my english i´m from Brazil.)
I have gt-I9003L.
have a big problem.
the signal is poor. i can´t use in closed areas, like home, shopping mall etc. work only in open area and not so good.
i would like to fix it ( signal problem ) i unlocked the phone with galaxysim unlock.
i wanna use the phone totally. phone with no signal and no internet conection, i don´t need it.
i have superuser access, busybox, titanium backup.
i´m trying to flash my phone to check if i can solve my problem.
i did follow the instructions in this link : http://www.tarracodroid.com/index.p...scl-gt-i9003?pageNumber=1#udjaCommentsWrapper
and now, my phone is dead. only black screen. i cant turn the phone on.
Please. help me
DJEPS said:
Hi Mustafa.
I´m new in this forum.
u r senior member, and maybe u can help me ( sorry about my english i´m from Brazil.)
I have gt-I9003L.
have a big problem.
the signal is poor. i can´t use in closed areas, like home, shopping mall etc. work only in open area and not so good.
i would like to fix it ( signal problem ) i unlocked the phone with galaxysim unlock.
i wanna use the phone totally. phone with no signal and no internet conection, i don´t need it.
i have superuser access, busybox, titanium backup.
i´m trying to flash my phone to check if i can solve my problem.
i did follow the instructions in this link : http://www.tarracodroid.com/index.p...scl-gt-i9003?pageNumber=1#udjaCommentsWrapper
and now, my phone is dead. only black screen. i cant turn the phone on.
Please. help me
Click to expand...
Click to collapse
Let me try help.
No signal inside building and bad signal in outdoor, odd. Are you on custom ROM or stock ROM?
When you said dead, does it vibrate and shows the bootlogo (Samsung, galaxy scl GT-i9003) then black screen (this is called 'Boot Freeze'), or the phone didn't vibrate and it didn't show any signs of life (if you stuck on this position...... last option, change mother board. This is called 'Hard Bricked')?
I need to know are you on custom/stock ROM, your kernel, and your baseband version.
~Message sent via telepathy from Galaxy SL
Black Screen
Rich'Dawg' said:
Let me try help.
No signal inside building and bad signal in outdoor, odd. Are you on custom ROM or stock ROM?
When you said dead, does it vibrate and shows the bootlogo (Samsung, galaxy scl GT-i9003) then black screen (this is called 'Boot Freeze'), or the phone didn't vibrate and it didn't show any signs of life (if you stuck on this position...... last option, change mother board. This is called 'Hard Bricked')?
I need to know are you on custom/stock ROM, your kernel, and your baseband version.
~Message sent via telepathy from Galaxy SL
Click to expand...
Click to collapse
I ave i think is custom rom, i never change nothing in the phone.
when i try to turn on, just vibrate once, e only black screen, don´t show me boot logo...
now i cant give baseband and kernel, i don´t have access, just like i told u, only black screen, but i can put it in download mode...
didi u see the link? thanks!!!
Android X Model
Rich'Dawg' said:
Let me try help.
No signal inside building and bad signal in outdoor, odd. Are you on custom ROM or stock ROM?
When you said dead, does it vibrate and shows the bootlogo (Samsung, galaxy scl GT-i9003) then black screen (this is called 'Boot Freeze'), or the phone didn't vibrate and it didn't show any signs of life (if you stuck on this position...... last option, change mother board. This is called 'Hard Bricked')?
I need to know are you on custom/stock ROM, your kernel, and your baseband version.
~Message sent via telepathy from Galaxy SL
Click to expand...
Click to collapse
hi Dawg.
Maybe u can help me.
I made all the procedures -> forum.xda-developers.com/showthread.php?t=1894737
in this moment i´m using 2.3.6 GB for GT-I9003.
But Now my phone show me other model version GT-I9003 and the original model is GT-I9003L my model finish with "L"
And looking for information on internet i found sammobile.com.
there, i found my device model ( GT-I9003L ) and a up grade firmware 2.3.6 for GT-I9003L. ( 2.2.1 original version )
My Signal problem still the same... I´m looking for a good baseband to use my phone in BRAZIL. i don´t now if you can help me.
*#1234#
Model Version:
PDA: I9003XXKPE
PHONE: I9003XXKPE
CSC: I9003XXKPE
Settings -> About Phone
Model Number: GT-I9003 ( before the procedure above was GT-I9003L )
Firmware version: 2.3.6
Baseband Version: I9003XXKPQ
Kernel Version: 2.3.6.7-CL709629 [email protected] #9
Build Number: GINGERBREAD.XXKPQ
Could u help me!?
Thanks in advance!
DJEPS said:
hi Dawg.
Maybe u can help me.
I made all the procedures -> forum.xda-developers.com/showthread.php?t=1894737
in this moment i´m using 2.3.6 GB for GT-I9003.
But Now my phone show me other model version GT-I9003 and the original model is GT-I9003L my model finish with "L"
And looking for information on internet i found sammobile.com.
there, i found my device model ( GT-I9003L ) and a up grade firmware 2.3.6 for GT-I9003L. ( 2.2.1 original version )
My Signal problem still the same... I´m looking for a good baseband to use my phone in BRAZIL. i don´t now if you can help me.
*#1234#
Model Version:
PDA: I9003XXKPE
PHONE: I9003XXKPE
CSC: I9003XXKPE
Settings -> About Phone
Model Number: GT-I9003 ( before the procedure above was GT-I9003L )
Firmware version: 2.3.6
Baseband Version: I9003XXKPQ
Kernel Version: 2.3.6.7-CL709629 [email protected] #9
Build Number: GINGERBREAD.XXKPQ
Could u help me!?
Thanks in advance!
Click to expand...
Click to collapse
Wait, you said i9003L? Oh right, its the code for SL user in America. Try DDLF2, that is the most stable ROM.
If that doesn't effect the phone..... Something is wrong inside your phone.
Sent from my GT-I9003 using xda app-developers app
0988846477 said:
Please help !
Update media please wait
E:Con t mount /dev/block/mmcblkop1
( No such file or directory )
E: copy_dbdata_media : Can t mount SDCARD :
your storage not prepard yet.please use Ui me
nu for format and reboot actions .
copy default media content failed..
i flash cm10.1 and is failed
View attachment 1821265
Click to expand...
Click to collapse
Full KPE with odin 1.85 to solve this problem
The Procedure
Rich'Dawg' said:
Wait, you said i9003L? Oh right, its the code for SL user in America. Try DDLF2, that is the most stable ROM.
If that doesn't effect the phone..... Something is wrong inside your phone.
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
Hi Dawg!
Could you help me?
I need know, where can i find this file DDLF2 , and how can i upgrade my phone. the correct procedure.
Thanks in advance
See ya
DJEPS said:
Hi Dawg!
Could you help me?
I need know, where can i find this file DDLF2 , and how can i upgrade my phone. the correct procedure.
Thanks in advance
See ya
Click to expand...
Click to collapse
Www.sammobile.com in the firmware section
Sent from my LT26i using Tapatalk 2
DDLF2
Rich'Dawg' said:
Wait, you said i9003L? Oh right, its the code for SL user in America. Try DDLF2, that is the most stable ROM.
If that doesn't effect the phone..... Something is wrong inside your phone.
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
Hi!
i´m already with DDLF2 now!
But signal, still the same!!! i don´t know what to do anymore...
i don´t know how many times i change Android version in my phone... maybe replace antenna?
I just wanna us my phone...
Somebody help meeeeee!!!!!
i've a galaxy sl 9003 with a stock rom, suddenly before 2 days the phone took a restart and then i was left with no cellular signal, no imei, no baseband version, i tried switching sim's but in vain, asked the guy at the service centre and got a shocker that the motherboard needs to be replaced....need help on this
the phone is working its booting up i can use the wifi but the cellular part isn't working...
bhavin.trivedi said:
i've a galaxy sl 9003 with a stock rom, suddenly before 2 days the phone took a restart and then i was left with no cellular signal, no imei, no baseband version, i tried switching sim's but in vain, asked the guy at the service centre and got a shocker that the motherboard needs to be replaced....need help on this
the phone is working its booting up i can use the wifi but the cellular part isn't working...
Click to expand...
Click to collapse
try flashing a CM9 based rom...
DDJF2
Rich'Dawg' said:
Wait, you said i9003L? Oh right, its the code for SL user in America. Try DDLF2, that is the most stable ROM.
If that doesn't effect the phone..... Something is wrong inside your phone.
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
Hi! Dawg
now, my phone is running DDLF2
*#1234#
PDA - I9003DDLF2
PHONE - I9003DDLE1
CSC - I9003DDLF2
Settings -> About Phone
Model Number: GT-I9003 ( before the procedure above was GT-I9003L )
Firmware version: 2.3.6
Baseband Version: I9003DDLE1
Kernel Version: 2.3.35.7-CL1153545
[email protected] #1
Build Number: GINGERBREAD.DDLF2
The signal, is better, but just a little bit.
Everything ( when i got signal ) works including internet conection, E, H or 3G...
But i´m still trying out fin find a baseband to use my phone with TIM in Brasil.
i gotta friend in the office and his phone is Galaxy SII Lite GT-I9070. if i put both phone one beside another, my friend´s phone gotta signal inside the office, and my phone... NO SERVICE...
I don´t know what to do anymore...
Please, somebody help me!!!!
DJEPS said:
Hi! Dawg
now, my phone is running DDLF2
*#1234#
PDA - I9003DDLF2
PHONE - I9003DDLE1
CSC - I9003DDLF2
Settings -> About Phone
Model Number: GT-I9003 ( before the procedure above was GT-I9003L )
Firmware version: 2.3.6
Baseband Version: I9003DDLE1
Kernel Version: 2.3.35.7-CL1153545
[email protected] #1
Build Number: GINGERBREAD.DDLF2
The signal, is better, but just a little bit.
Everything ( when i got signal ) works including internet conection, E, H or 3G...
But i´m still trying out fin find a baseband to use my phone with TIM in Brasil.
i gotta friend in the office and his phone is Galaxy SII Lite GT-I9070. if i put both phone one beside another, my friend´s phone gotta signal inside the office, and my phone... NO SERVICE...
I don´t know what to do anymore...
Please, somebody help me!!!!
Click to expand...
Click to collapse
how about you lokk at this http://forum.xda-developers.com/showthread.php?t=1004647
i think there are all the modems and stock roms
not able to go into anything except download mode
DJEPS said:
I ave i think is custom rom, i never change nothing in the phone.
when i try to turn on, just vibrate once, e only black screen, don´t show me boot logo...
now i cant give baseband and kernel, i don´t have access, just like i told u, only black screen, but i can put it in download mode...
didi u see the link? thanks!!!
Click to expand...
Click to collapse
i too have the same problem!!!:crying:
also, not detected by odin
wasiq2210 said:
i too have the same problem!!!:crying:
also, not detected by odin
Click to expand...
Click to collapse
Download and Install the latest samsung usb driver in your pc. then try connecting to ODIN in download mod. it will detect your device.
Try Replacing your microSdCard and reflash your rom with a clean install.
If you cannot replace it you can try fixing it by downloading SD Card Formater for windows.
Plug you sdcard to your computer.
Open SDCard Formater.
Format the sdcard using the options that will set it to its default values.
If it doesnt help. Try with a new SDCard.
Please press "Thank" button if it helped you.
Sent from my GT-I9003 using XDA Free mobile app
I need to completely set phone back to factory settings like all of it. How do i do it please someone help me. Do i use reboot or odin. Can you also point me to the software i can use. Sprint Galaxy s4 L720
lclutchl said:
I need to completely set phone back to factory settings like all of it. How do i do it please someone help me. Do i use reboot or odin. Can you also point me to the software i can use. Sprint Galaxy s4 L720
Click to expand...
Click to collapse
when u use the method of flashing .tar file using odin its like unrooting your phone ; flashing the whole firmware in your phone again . in reboot mode or i guess the recovery mode ur talking about where u need to press buttons in ur device to be able to do that. it does the same thing but it just a lot easier than using odin.
but i guess your not rooted so just use the recovery mode or even in your settings option ; there is also factory reset option . but when your rooted, u need to go in odin method ..
lclutchl said:
I need to completely set phone back to factory settings like all of it. How do i do it please someone help me. Do i use reboot or odin. Can you also point me to the software i can use. Sprint Galaxy s4 L720
Click to expand...
Click to collapse
Bro,
Power+home key +volume up= recovery mode
In this mode you can factory reset /wipe data/wipe cached partition/install zip etc.
Poeer+home key+volume down= download mode
In this mode can flash any custom rom/recovery etc. Means you can flash .tar file with your computer . But you need odin etc installed on your pc.
Hope this helps... This has nothing to do with rooted or unrooted device.
Sent from my GT-S7582 using XDA Premium 4 mobile app
pinkLeviosa said:
when u use the method of flashing .tar file using odin its like unrooting your phone ; flashing the whole firmware in your phone again . in reboot mode or i guess the recovery mode ur talking about where u need to press buttons in ur device to be able to do that. it does the same thing but it just a lot easier than using odin.
but i guess your not rooted so just use the recovery mode or even in your settings option ; there is also factory reset option . but when your rooted, u need to go in odin method ..
Click to expand...
Click to collapse
My phone is rooted and it stays rooted even if i install new roms. I did something wrong somehere and now a few features dont work on my phone. I was wondering how to make it right again. Doing regular factory reset does not work and odin mode also didnt work. Any ideas?
Just helpin'
lclutchl said:
My phone is rooted and it stays rooted even if i install new roms. I did something wrong somehere and now a few features dont work on my phone. I was wondering how to make it right again. Doing regular factory reset does not work and odin mode also didnt work. Any ideas?
Click to expand...
Click to collapse
Since your phone is rooted , even you will flash/install rom or "custom" rom it wont unroot your phone because flashing "custom" rom from the name itself, it is customized by our respected developers to make our device more personalize and so we can do some things in our device that we cant do in our non-rooted phones. you need proper files to remove root in your device its called unrooting or unbricking. Maybe some feauters dont work because of your custom rom or any system app you accidentally deleted. to correct it , you can do factory reset but since it didnt work you can try to restore your backup if you ever made one. But i suggest to unroot your device or return it to its stock to be sure so you can really start all over again...
you can easily search how to unroot your phone.
pinkLeviosa said:
Since your phone is rooted , even you will flash/install rom or "custom" rom it wont unroot your phone because flashing "custom" rom from the name itself, it is customized by our respected developers to make our device more personalize and so we can do some things in our device that we cant do in our non-rooted phones. you need proper files to remove root in your device its called unrooting or unbricking. Maybe some feauters dont work because of your custom rom or any system app you accidentally deleted. to correct it , you can do factory reset but since it didnt work you can try to restore your back p if you ever made one. But i suggest to unroot your device or return it to its stock to be sure so you can really start all over again...
you can easily search how to unroot your phone.
Click to expand...
Click to collapse
I wnat to return it to stock but i cannot find out how to do that can you assist me plesase?
lclutchl said:
I wnat to return it to stock but i cannot find out how to do that can you assist me plesase?
Click to expand...
Click to collapse
Find it here http://samsung-updates.com/device/?id=SPH-L720
Remember it is for SPH-L720
If your device has other model number you can find stock Rom on
Http://samsung-updates.com
Good luck... Don't forget to hit thanx
Sent from my GT-S7582 using XDA Premium 4 mobile app
Killwish said:
Find it here http://samsung-updates.com/device/?id=SPH-L720
Remember it is for SPH-L720
If your device has other model number you can find stock Rom on
Http://samsung-updates.com
Good luck... Don't forget to hit thanx
Sent from my GT-S7582 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Wat do i use to install odin or te reboot screen?
lclutchl said:
Wat do i use to install odin or te reboot screen?
Click to expand...
Click to collapse
Odin is a Windows tool to flash Rom to samsung devices... Search on Google for it... And run it on pc
Then start your device to download mode.... And connect to pc..
You can find tutorials on Internet for it.... Search "how to use Odin"
Sent from my GT-S7582 using XDA Premium 4 mobile app