Database Info

[Q] Tried to Install MIUI, Now Stuck

Welp I am one of the stupid ones and installed MIUI on my Infuse, and like everyone else, I'm stuck on the boot screen. I looked at the post on the same topic and tried to do it but couldn't get it to work probably becuase the computer says that its an Unknown device instead of a Samsung device.
So my question is what do I do now that my computer doesn't recongize the phone as a device anymore?
Thanks to all that can give help.

http://forum.xda-developers.com/showthread.php?t=1116251
And lesson learned - never install a ROM from another phone.

Yeah I know that now. Foolish mistake I know I shouldn't have made.
But, I have tried using that but when I connect the phone to the computer it shows to be an unknown device and Odin doesn't pick it up at all. My problem is, is that the computer doesn't recognize it as an Android Device anymore. Is downloading the drivers from Samsung going to help?

I'll have to leave that to someone else - I use Heimdall on a Linux box, I've never flashed from Windows.

Oh, ok. Well thanks for your help .

I fixed my problem. What I had to do was get another computer that doesn't have the Samsung Drivers or Kies installed and then install them. Once that was done Odin found the device and I was able to restore it.
So there's a tip for anyone who can't get their device to be recognized by the computer or Odin itself.

Or just uninstall/delete those drivers?

Entropy512 said:
I'll have to leave that to someone else - I use Heimdall on a Linux box, I've never flashed from Windows.
Click to expand...
Click to collapse
i have started to do this to since i got the infuse. ill tell you i dont miss driver issues one bit! linux/bsd/mac/whatever rock as long as you have supported hardware and that is becoming less and less of a problem these days.

re: Now Stuck
You need to try and pull the battery out and put it back see if you can get the phone into "download mode". If you cannot get it into download mode by doing that or using the up/down volume and power key combo then I would suggest that you purchase a "jig" on ebay. (they cost under $10 bucks shipped).
Here is the ebay link for the jig:
http://cgi.ebay.com/Samsung-Galaxy-...0563626533?pt=Cell_Phones&hash=item20ba3eba25
With a jig all you would need to do is to remove battery, plug the little jig into the usb port of phone and replace the battery, then wait 5 seconds or so and the phone will be in download mode allowing you to use Odin3 and flash back to "stock rom" to start with..
Best if you did that using the "Ultimate Unbrick" stock froyo rom after that
you can install infuse 1.5 custom rom or Bionix or the defused custom rom or any other rom.
Here is the link for the Ultimate Unbrick:
http://forum.xda-developers.com/showthread.php?t=1116251
Good luck.

nstong said:
Or just uninstall/delete those drivers?
Click to expand...
Click to collapse
I tried that but it didn't work on my computer, but that's just my computer that could work for someone else. If that doesn't work though, you can get another computer and install the drivers on them and that should work.

SamsTechAnswers said:
I tried that but it didn't work on my computer, but that's just my computer that could work for someone else. If that doesn't work though, you can get another computer and install the drivers on them and that should work.
Click to expand...
Click to collapse
Where are you trying to uninstall the drivers from? I have windows 7 and went to device manager or whatever and took it off there. Then reinstalled kies, worked perfect after.
Sent from my SAMSUNG-SGH-I997 using XDA App

Entropy512 said:
http://forum.xda-developers.com/showthread.php?t=1116251
And lesson learned - never install a ROM from another phone.
Click to expand...
Click to collapse
and.... do not touch if it works properly

I guess this is a good sign. Our phone is gaining popularity because new people are buying it and trying dumb things with it

Please help me with download mode!!

Hello, i am currently trying to root my sisters galaxy s 4g... Her Baseband is T949VUVKI1. Firmware is 2.3.5, Build Number is GINGERBREAD.VUVKI1. i remember flashing her phone to 2.3.5 and download mode working perfectly fine, and for some reason it wont go into download mode at all... the computer is not recognizing her phone either. YES, i do have usb drivers installed otherwise my galaxy s 4g wouldnt be recognized on my computer(odin specifically, not turning yellow). Please help, i have searched everywhere in the internet and tried almost everything... Volume up and down and plug charger, batter out volume up and down usb and battery in etc. PLEASE HELP!! Thank You in Advance.

Nvm
10c

1. Try reinstalling to drivers. Also make sure you're using the same USB port as Windows can be funny about it it sometimes.
2. if download mode is being difficult, go download the Android SDK from www.android.com. Install it, run it, and only download the platform tools. When that's done, open a command promt, CD to where the plaform tools installed (either c:\program files\Android\Android-sdk\platform-tools or c:\program files (x86)\Android\Android-sdk\platform-tools ), then issue the command: adb reboot download.
3. I suggest you check the dev section for bhundven's one-click collection. Uses Java and Heimdall vs. ODIN and works easily.
Sent from my SGH-T959V using XDA App

i have this issue 2.3.5 messed me up. Odin sees my phone in debug mode but not in download mode...using odin 1.85 sinse it is the only version that responds to my phone at all. help please!

Tytan0007 said:
i have this issue 2.3.5 messed me up. Odin sees my phone in debug mode but not in download mode...using odin 1.85 sinse it is the only version that responds to my phone at all. help please!
Click to expand...
Click to collapse
Get it back into download mode, go grab a bhundven's one-click. The one-clicks utilize Heimdall vs. ODIN, which means they use open-source USB drivers instead of the proprietary Samsung drivers. See if that enables the computer to see the phone. If so, flash the one-click

Should I uninstall the samsung drivers prior to using Heimdall's One-Click?

Tytan0007 said:
Should I uninstall the samsung drivers prior to using Heimdall's One-Click?
Click to expand...
Click to collapse
That's a good idea. Some people have reported conflicts between the drivers.

Why would only Odin 1.85 see my phone in USB Debugging and not in download mode? And all other Odin verisions never see my phone, no matter what state it is in... I am at work so I will give the one click another try when I get home. I never thought of uninstalling the Samsung drivers prior to install; however, I did use the one click method to no avail. However, Heimdall's one-click was able to see my device it just kept giving me a driver error. This is so crazy it might just work.

Tytan0007 said:
Why would only Odin 1.85 see my phone in USB Debugging and not in download mode? And all other Odin verisions never see my phone, no matter what state it is in... I am at work so I will give the one click another try when I get home. I never thought of uninstalling the Samsung drivers prior to install; however, I did use the one click method to no avail. However, Heimdall's one-click was able to see my device it just kept giving me a driver error. This is so crazy it might just work.
Click to expand...
Click to collapse
I wish I had a good answer. ODIN's a funny animal. I've been fortunate and not had any problems with it. I am hoping you are correct - maybe it was just a driver conflict. Let me know how it goes.

didn't work...

You could try downloading a terminal app from the market. Open the terminal and type:
reboot download
See if that does it.

***Update***
Okay, so Oneclick was not working at all no matter what I did with the drivers. However, in all my tinkering with it I installed the Samsung Driver, the Open Source one, and some gadget driver as well from oneclick.
Doing this put all these drivers in my computer. Then I went into my Device manager (Win 7) and looked at my USB driver and I uninstalled everything and went to the stock win 7 usb driver. Then I plugged my phone in and my computer began searching for drivers for this device when it decided that it would be a good idea to load all three drivers at once and voila my phone was then showing up on ODIN 1.85.
I then proceeded to flash my phone with a rom, probably the wrong one considering I was coming from 2.3.5 and my phone boot looped and then soft bricked(sorry if I used these term incorrectly, noobin it).
After, some nervous moment of scouring XDA I found the god-send of a post on getting in to download mode, using odin, and flashing stock 2.3.6 - thank you Raver(I believe). When I did this, my phone magically started obeying ODIN like a devout viking and is now running 2.3.6 superbly.
Keeping with my phones newly found viking heritage, I intend to figure out how to properly root it, update the kernal and modem(not sure which one is best), get CWM, and subsequesntly put in Valhalla Black.
Seeing as though this last rendevous with flashing caused me a little scare I may hold off and wait to see what the next big update is (maybe a port ICS variant) and then go with that.
Anyway, thank you Stephen for helping me out with this and to everyone in this post.

Here's some reading for you Tytan,
http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_4G#FAQ_.28with_answers.29
PS: Unless you wanna brick your phone, do not flash anything that isn't intended for the SGH-T959V Samsung Galaxy S 4G. You're saying you wanna flash a Vibrant ROM. You can, if you want an expensive paperweight. Happy flashing!

2.3.5 may have been for vibrant...yeah I think I got lucky. I did it prior to knowing about xda.
Sent from my SGH-T959V using XDA App

Tytan0007 said:
didn't work...
Click to expand...
Click to collapse
How are you getting into download mode?
There was a post in another thread where the person apparently was using the power menu to get into download mode or maybe the adb command.
Have you tried both the old fashion volume +/- and plug in usb cable? Or the adb command?
Do you have access to another computer? Believe it or not sometimes just changing computers will make the difference.
Weird when I replied there was no posts other than the ones on the first page...oh well glad its working now.

[Q] Need help getting my T959V connected for flashing/rooting.

Problem: Cannot get my Samsung T959V to connect to the computer in order to flash/root. Always gives the same "USB Device Not Recognized" error when I plug it in to the computer.
My Progress: Before you guys throw this questions out, let me tell you what I have tried so far. I have been trying to get this damn thing connected to the computer for about 3 weeks now. I have sat down on my computer going through the xda forum in detail trying to find an answer. I know the process of flashing and the xda contributors have some great guides to help us along the way, a big thanks to all ur hard work, but no matter what, I cannot get the phone in download mode or get it connected to the computer.
* I have read the Download Mode post and tried all 5 ways without luck.
* Have read all things related to Keis Mini and how it sucks when it comes to the T959V and other ppl have had the same problem.
* Have tried connecting in Keis mode, usb debugging mode but still the same error.
If someone can help me get my phone connected to the computer, I am sure I can take of the rest since everything is available on the SGS4G Bible, thanks for that also.
Is there anything I have missed or not tried yet? Please help. Thanks in advance for anyone who reads this post as it is my first. Usually I don't have to post since all the documentation is always up-to-date and available but this problem is killing me
Additional Information: Bought the phone from a cell-phone store I use to work at. Has Android 2.3.6 on it. Have done the factory reset and tried to get it to connect, no luck. Not sure if it has been flashed before, pretty sure it hasnt but the flashed download mode method didnt work also. Have android-sdk installed and have tried pointing the .inf file to the google usb-drivers in the sdk, no luck. Download both 32-bit and 64-bit drivers for this phone from multiple locations, still no luck trying to connect. Have also tried multiple computers and multiple v9 cables, no luck.

Have you installed the Samsung drivers? You mention google drivers but samsung has it's own. You should be able to find them in the noobs guide to Odin thread. DL mode should work as well regardless of what drivers you have installed. Pull the battery, plug usb into computer, plug phone into usb, hold down BOTH vol + and -, insert battery. I've never not seen that method work.

hechoen said:
Have you installed the Samsung drivers? You mention google drivers but samsung has it's own. You should be able to find them in the noobs guide to Odin thread. DL mode should work as well regardless of what drivers you have installed. Pull the battery, plug usb into computer, plug phone into usb, hold down BOTH vol + and -, insert battery. I've never not seen that method work.
Click to expand...
Click to collapse
Yup tried both 32-bit and 64-bit drivers on multiple computers. Tried the download mode method u said also. Trust me have tried everything I have read about and know, but no luck.

But the phone charges fine? Could be a bad USB port. Or partially bad. Have you tried a jig? If that doesn't work I'd say your hardware is screwed up somewhere.

hechoen said:
But the phone charges fine? Could be a bad USB port. Or partially bad. Have you tried a jig? If that doesn't work I'd say your hardware is screwed up somewhere.
Click to expand...
Click to collapse
Yup it charges fine. Both when I plug it into the wall and the computer. What's a jig? Don't think I have tried that yet. If something can let me know for sure its a hardware problem, then I will stop obsessing over this, hahaha. Thanks for ur help btw.

A jig is a nifty little device that plugs in to your USB port on the phone and then gets you to DL mode. Their mostly used to recvover from bad flashes(like flashing the wrong phones kernel). Here's a link:
http://www.ebay.com/itm/Download-Mode-USB-Jig-Samsung-Omnia-7-Galaxy-S-4G-/250877662279
If your cheap like me or just wanna make it fast here's a guide to making your own.
http://forum.xda-developers.com/showthread.php?t=1604707

hechoen said:
A jig is a nifty little device that plugs in to your USB port on the phone and then gets you to DL mode. Their mostly used to recvover from bad flashes(like flashing the wrong phones kernel). Here's a link:
http://www.ebay.com/itm/Download-Mode-USB-Jig-Samsung-Omnia-7-Galaxy-S-4G-/250877662279
If your cheap like me or just wanna make it fast here's a guide to making your own.
http://forum.xda-developers.com/showthread.php?t=1604707
Click to expand...
Click to collapse
Awesome bro. I will see if I have time to make the jig, if not i will just order it.
Also, is there any way to flash/root without DL mode or USB debugging or using Keis? My recovery mode works but that's all. Was wondering if there was a way i could flash/root from the 'apply update from sdcard' option in the recovery mode?

Seems like a driver error have u tried one of the heimdall one clicks http://forum.xda-developers.com/showthread.php?t=1358498
They will put u back to stock with a modified rooted kernel .
If anything try and manually point to the drivers in device manager. Or download android sdk and use the google drivers ?

rangergiya said:
Also, is there any way to flash/root without DL mode or USB debugging or using Keis? My recovery mode works but that's all. Was wondering if there was a way i could flash/root from the 'apply update from sdcard' option in the recovery mode?
Click to expand...
Click to collapse
There was with Froyo but with GB it's all been put into the kernel. So not that I'm aware of. However one of the GB leaks changed the key mapping of the phone. I forget which one but that might be the issue. Go to settings>about phone>build number and let me know what that says. post the base band as well.

hechoen said:
There was with Froyo but with GB it's all been put into the kernel. So not that I'm aware of. However one of the GB leaks changed the key mapping of the phone. I forget which one but that might be the issue. Go to settings>about phone>build number and let me know what that says. post the base band as well.
Click to expand...
Click to collapse
As requested,
Build number: GINGERBREAD.VUVKJ6
Baseband version: T959VUVKJ6

Well that is the official GB release so now I officially have no idea why you can't get into DL mode. Get the jig and let me know if that works. Good luck.

hechoen said:
Well that is the official GB release so now I officially have no idea why you can't get into DL mode. Get the jig and let me know if that works. Good luck.
Click to expand...
Click to collapse
Will do. Thanks for ur help.
I downloaded the terminal emulator app and tried doing 'reboot download' but says 'operation not permitted,' any way to get around that? Or any other non-button or non-adb way to get into download mode? Other than the jig? Or is it possible to get su privileges on an unrooted device for the 'reboot' command to work in the terminal emulator app?

It's giving you "not permitted" because you don't have root. Have you tried Super One Click to root? If you can get SOC to root it you can use terminal to force DL mode.
If you haven't hears the link.
http://shortfuse.org/
DL 2.3.1. It should come with the android drivers as well. Worth a shot. If it doesn't work it doesn't damage the phone at all.

hechoen said:
It's giving you "not permitted" because you don't have root. Have you tried Super One Click to root? If you can get SOC to root it you can use terminal to force DL mode.
If you haven't hears the link.
http://shortfuse.org/
DL 2.3.1. It should come with the android drivers as well. Worth a shot. If it doesn't work it doesn't damage the phone at all.
Click to expand...
Click to collapse
Im trying it now but for SOC to work, i have to have the proper drivers to get my phone connected. Will see whether the drivers that come with SOC work for my phone.

No luck with the SOC 2.3.1 drivers. They r the same as the android-sdk drivers
Will try the jig. Hope it works.

Have you tried using this DRIVER SWEEPER to remove the drivers?

eollie said:
Have you tried using this DRIVER SWEEPER to remove the drivers?
Click to expand...
Click to collapse
And then what? I've tried to get the phone connected on multiple computers without any luck. Uninstall and reinstall didnt give me any results.

rangergiya said:
And then what? I've tried to get the phone connected on multiple computers without any luck. Uninstall and reinstall didnt give me any results.
Click to expand...
Click to collapse
Im sorry I am having mouse issues that deleted part of my response..
Sometimes a residual driver will not allow you to properly install the drivers. I had a LG driver from my old phone that was conflicting with Samsung driver.
Also this is a new root process. I do not know if it will work or not. But Hell its worth a try right?
http://forum.xda-developers.com/showthread.php?t=1652825&highlight=root

eollie said:
Im sorry I am having mouse issues that deleted part of my response..
Sometimes a residual driver will not allow you to properly install the drivers. I had a LG driver from my old phone that was conflicting with Samsung driver.
Also this is a new root process. I do not know if it will work or not. But Hell its worth a try right?
http://forum.xda-developers.com/showthread.php?t=1652825&highlight=root
Click to expand...
Click to collapse
Thanks for that link. I will try it out and give an update here.

rangergiya said:
No luck with the SOC 2.3.1 drivers. They r the same as the android-sdk drivers
Will try the jig. Hope it works.
Click to expand...
Click to collapse
Just to make sure you had usb debugging and allow non market apss both CHECKED right?

Firmware upgrade encountered an issue

Ok so i searched and searched and searched but found similar issues but not my issue. I was flashing a rom and it went into a boot loop. I went to get out of it and it wouldnt let me so i used a 1 touch odin download. When i plugged it in my computer recognized the phone i clicked start and it failed because my phone stopped being recognized by my computer. (i can get into download mode with no issue.) Now when i plug it in it just says usb device not recognized. I have uninstalled reinstalled drivers several times. tried multiple cables multiple computers. It also says gadget serial in the device name when its trying to auto find the driver... strange. I just need my phone back together lol. I was working on this til 3 am last night and had to run to walmart to get a cheap alarm clock to wake me up for work this morning at 6 any help is appreciated

trithumb said:
Ok so i searched and searched and searched but found similar issues but not my issue. I was flashing a rom and it went into a boot loop. I went to get out of it and it wouldnt let me so i used a 1 touch odin download. When i plugged it in my computer recognized the phone i clicked start and it failed because my phone stopped being recognized by my computer. Now when i plug it in it just says usb device not recognized. I have uninstalled reinstalled drivers several times. tried multiple cables multiple computers. It also says gadget serial in the device name when its trying to auto find the driver... strange. I just need my phone back together lol. I was working on this til 3 am last night and had to run to walmart to get a cheap alarm clock to wake me up for work this morning at 6 any help is appreciated
Click to expand...
Click to collapse
You need to try the one click heimdall package by Bhundven in the development section

brandonc0526 said:
You need to try the one click heimdall package by Bhundven in the development section
Click to expand...
Click to collapse
isnt that a mac only program? if not can you get me a link. Im juggling fixing this while working lol

no is for windows and please dont ask in the dev section

solrac1212 said:
no is for windows and please dont ask in the dev section
Click to expand...
Click to collapse
oops sorry didnt realize i was in the dev section

Not to be a ****, but I am reporting this thread to the mods and asking them to move it to the q&a section.
To fix your issue, using my odin 1 click (gremlin remover), start the 1-click, then boot into dl mode. If device still isn't recognized, go into device manager right click on the device and update drivers manually. Reboot phone into dl mode and all should be well.

Also once you reinstall drivers or update them, reboot your computer. That always helps the computer recognize my phone when I have this issue. Good luck.

Try another cable and usb port.

eollie said:
Try another cable and usb port.
Click to expand...
Click to collapse
again in the main post. I tried multiple computers multiple cables and all the usb ports on all 4 of my laptops

Start Oden first then plug in the phone give Oden a second to find the phone. When the box on the upper left turn yellow then you can start. Directions work for both one click GR and regular Oden.
Sent from my SGH-T959V using xda app-developers app

under device manager it shows error code 43 on "unknown device" no matter how i install or dont install drivers... use kies or not use kies... let windows find it or not.... just doesnt work

brighter minds than min here, but "one-click" and "odin" are different routes to the same end, aren't they? But if you start with heimdall and that fails, you will likely get the drivers issue when you try odin. I suggest opening device manager on your Win machine and removing all drivers related to the phone as storage device or whatever. Then reboot your machine. When you get to your desktop, open odin (my preferred tool), then with your phone powered down, hold vol-up+vol-down together and connect the phone to your usb cable. Win should find the drivers and load them, and odin should see your phone.

Gonna steal something from lumin30 here.
* * If you have used your phone on every USB Port and/or have no idea where all you have plugged your phone into or used ODIN or Heimdall with - Download [usbdeview-x32.zip] for 32-bit operating systems or [usbdeview-x64.zip] for 64-bit operating systems. Uninstall anything you see that has Samsung and Android related.
Click to expand...
Click to collapse
It is from this guide here. I suggest following post two to get everything fixed.
http://forum.xda-developers.com/showthread.php?p=21953878

Odin setup connection

Hello pisses me off Odin
the drivers are installed
Kies is not installed
I try all the usb port
I try these other usb cable
I tried every version odin
Thank you to solve my problem:laugh:

Kris1107 said:
Hello pisses me off Odin
the drivers are installed
Kies is not installed
I try all the usb port
I try these other usb cable
I tried every version odin
Thank you to solve my problem:laugh:
Click to expand...
Click to collapse
First uninstall and reinstall the drivers for your phone. Get them from Samsung site just to be safe. also try redownloading odin from a different website, could be a bad download. and 'm assuming you have a good USB cable and good USB Ports.
also what model phone are you using? that's in settings--about device--model number

drago10029 said:
First uninstall and reinstall the drivers for your phone. Get them from Samsung site just to be safe. also try redownloading odin from a different website, could be a bad download. and 'm assuming you have a good USB cable and good USB Ports.
also what model phone are you using? that's in settings--about device--model number
Click to expand...
Click to collapse
Hi, I'm kinda having the same problem the original poster is having.
My problem is, my windows 7 computers do not see the phone at all, no matter which cable/USB port I use. No beep, no trying to install drivers, no nothing. I'm assuming that unless windows sees the device to begin with... I won't be able to use kies or Odin or heimdall or adb or anything right?

android n said:
Hi, I'm kinda having the same problem the original poster is having.
My problem is, my windows 7 computers do not see the phone at all, no matter which cable/USB port I use. No beep, no trying to install drivers, no nothing. I'm assuming that unless windows sees the device to begin with... I won't be able to use kies or Odin or heimdall or adb or anything right?
Click to expand...
Click to collapse
ok, have you checked device manager to see if the phone shows up there? and you're right if it isn't being detected than you can't use it basically lol. I know sucks.
honestly, download the drivers manually and install them. If you're not sure how to check device manager or find the drivers google is you're friend :good: hope you get it working!

drago10029 said:
First uninstall and reinstall the drivers for your phone. Get them from Samsung site just to be safe. also try redownloading odin from a different website, could be a bad download. and 'm assuming you have a good USB cable and good USB Ports.
also what model phone are you using? that's in settings--about device--model number
Click to expand...
Click to collapse
drago10029 said:
ok, have you checked device manager to see if the phone shows up there? and you're right if it isn't being detected than you can't use it basically lol. I know sucks.
honestly, download the drivers manually and install them. If you're not sure how to check device manager or find the drivers google is you're friend :good: hope you get it working!
Click to expand...
Click to collapse
Drago, thanks for trying to help me, can't tell you how much I appreciate it bro. Now when it comes to windows, I'm no noob, I actually own a small business going out to people's houses and fixing their computer/WiFi/printer problems. So device manager, yeah I tried "scanning for new hardware" tried and tried, checked and checked, restarted, tried safe mode, tried using different administrator account, nothing. That's when I got this gut sinking feeling, what if something is wrong with the USB port on the phone.
It's a SM-S820L, galaxy core prime. No sound when I plug it in, nothing shows up in 'my computer', no tuh noon sound, and I remember back when the phone was working like normal, I tried to get a picture or two off of it by plugging it in while it was on, I remember it showed up in windows no problem, even without the drivers from Samsung installed. Now nothing happens, even though it says download mode.
I still need your help Drago, don't forget about me

android n said:
Drago, thanks for trying to help me, can't tell you how much I appreciate it bro. Now when it comes to windows, I'm no noob, I actually own a small business going out to people's houses and fixing their computer/WiFi/printer problems. So device manager, yeah I tried "scanning for new hardware" tried and tried, checked and checked, restarted, tried safe mode, tried using different administrator account, nothing. That's when I got this gut sinking feeling, what if something is wrong with the USB port on the phone.
It's a SM-S820L, galaxy core prime. No sound when I plug it in, nothing shows up in 'my computer', no tuh noon sound, and I remember back when the phone was working like normal, I tried to get a picture or two off of it by plugging it in while it was on, I remember it showed up in windows no problem, even without the drivers from Samsung installed. Now nothing happens, even though it says download mode.
I still need your help Drago, don't forget about me
Click to expand...
Click to collapse
alright well you have one of 3 issues then honestly.
1. phone USB port like you said
2. the PC/laptop USB or..
3.cable or driver issues.
make sure your completly uninstall the phones drivers in device manager while the phone is plugged into the PC. next unplug the phone, restart, reinstall actuall samsung drivers, than try pluggin in again. use a known working USB port also.
sorry I can't give you an answer that's the best I can think of, let me know how it goes!

drago10029 said:
alright well you have one of 3 issues then honestly.
1. phone USB port like you said
2. the PC/laptop USB or..
3.cable or driver issues.
make sure your completly uninstall the phones drivers in device manager while the phone is plugged into the PC. next unplug the phone, restart, reinstall actuall samsung drivers, than try pluggin in again. use a known working USB port also.
sorry I can't give you an answer that's the best I can think of, let me know how it goes!
Click to expand...
Click to collapse
Hey drago, here is an update, I have tried everything and nothing has worked, here is the newest thread that details where I'm at http://forum.xda-developers.com/android/help/options-to-help-t3321873

android n said:
Hey drago, here is an update, I have tried everything and nothing has worked, here is the newest thread that details where I'm at http://forum.xda-developers.com/android/help/options-to-help-t3321873
Click to expand...
Click to collapse
You can try redownloading Odin and also running Odin as an administrator, that's been the case one in a while. lastly uninstall and reinstalling drivers could help. If this does'nt do it sorry, I'm all out of ideas.

I have same problem with Odin v4.42 and work with Odin3_v3.04,try different version of Odin.