Hello, i am currently trying to root my sisters galaxy s 4g... Her Baseband is T949VUVKI1. Firmware is 2.3.5, Build Number is GINGERBREAD.VUVKI1. i remember flashing her phone to 2.3.5 and download mode working perfectly fine, and for some reason it wont go into download mode at all... the computer is not recognizing her phone either. YES, i do have usb drivers installed otherwise my galaxy s 4g wouldnt be recognized on my computer(odin specifically, not turning yellow). Please help, i have searched everywhere in the internet and tried almost everything... Volume up and down and plug charger, batter out volume up and down usb and battery in etc. PLEASE HELP!! Thank You in Advance.
Nvm
10c
1. Try reinstalling to drivers. Also make sure you're using the same USB port as Windows can be funny about it it sometimes.
2. if download mode is being difficult, go download the Android SDK from www.android.com. Install it, run it, and only download the platform tools. When that's done, open a command promt, CD to where the plaform tools installed (either c:\program files\Android\Android-sdk\platform-tools or c:\program files (x86)\Android\Android-sdk\platform-tools ), then issue the command: adb reboot download.
3. I suggest you check the dev section for bhundven's one-click collection. Uses Java and Heimdall vs. ODIN and works easily.
Sent from my SGH-T959V using XDA App
i have this issue 2.3.5 messed me up. Odin sees my phone in debug mode but not in download mode...using odin 1.85 sinse it is the only version that responds to my phone at all. help please!
Tytan0007 said:
i have this issue 2.3.5 messed me up. Odin sees my phone in debug mode but not in download mode...using odin 1.85 sinse it is the only version that responds to my phone at all. help please!
Click to expand...
Click to collapse
Get it back into download mode, go grab a bhundven's one-click. The one-clicks utilize Heimdall vs. ODIN, which means they use open-source USB drivers instead of the proprietary Samsung drivers. See if that enables the computer to see the phone. If so, flash the one-click
Should I uninstall the samsung drivers prior to using Heimdall's One-Click?
Tytan0007 said:
Should I uninstall the samsung drivers prior to using Heimdall's One-Click?
Click to expand...
Click to collapse
That's a good idea. Some people have reported conflicts between the drivers.
Why would only Odin 1.85 see my phone in USB Debugging and not in download mode? And all other Odin verisions never see my phone, no matter what state it is in... I am at work so I will give the one click another try when I get home. I never thought of uninstalling the Samsung drivers prior to install; however, I did use the one click method to no avail. However, Heimdall's one-click was able to see my device it just kept giving me a driver error. This is so crazy it might just work.
Tytan0007 said:
Why would only Odin 1.85 see my phone in USB Debugging and not in download mode? And all other Odin verisions never see my phone, no matter what state it is in... I am at work so I will give the one click another try when I get home. I never thought of uninstalling the Samsung drivers prior to install; however, I did use the one click method to no avail. However, Heimdall's one-click was able to see my device it just kept giving me a driver error. This is so crazy it might just work.
Click to expand...
Click to collapse
I wish I had a good answer. ODIN's a funny animal. I've been fortunate and not had any problems with it. I am hoping you are correct - maybe it was just a driver conflict. Let me know how it goes.
didn't work...
You could try downloading a terminal app from the market. Open the terminal and type:
reboot download
See if that does it.
***Update***
Okay, so Oneclick was not working at all no matter what I did with the drivers. However, in all my tinkering with it I installed the Samsung Driver, the Open Source one, and some gadget driver as well from oneclick.
Doing this put all these drivers in my computer. Then I went into my Device manager (Win 7) and looked at my USB driver and I uninstalled everything and went to the stock win 7 usb driver. Then I plugged my phone in and my computer began searching for drivers for this device when it decided that it would be a good idea to load all three drivers at once and voila my phone was then showing up on ODIN 1.85.
I then proceeded to flash my phone with a rom, probably the wrong one considering I was coming from 2.3.5 and my phone boot looped and then soft bricked(sorry if I used these term incorrectly, noobin it).
After, some nervous moment of scouring XDA I found the god-send of a post on getting in to download mode, using odin, and flashing stock 2.3.6 - thank you Raver(I believe). When I did this, my phone magically started obeying ODIN like a devout viking and is now running 2.3.6 superbly.
Keeping with my phones newly found viking heritage, I intend to figure out how to properly root it, update the kernal and modem(not sure which one is best), get CWM, and subsequesntly put in Valhalla Black.
Seeing as though this last rendevous with flashing caused me a little scare I may hold off and wait to see what the next big update is (maybe a port ICS variant) and then go with that.
Anyway, thank you Stephen for helping me out with this and to everyone in this post.
Here's some reading for you Tytan,
http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_4G#FAQ_.28with_answers.29
PS: Unless you wanna brick your phone, do not flash anything that isn't intended for the SGH-T959V Samsung Galaxy S 4G. You're saying you wanna flash a Vibrant ROM. You can, if you want an expensive paperweight. Happy flashing!
2.3.5 may have been for vibrant...yeah I think I got lucky. I did it prior to knowing about xda.
Sent from my SGH-T959V using XDA App
Tytan0007 said:
didn't work...
Click to expand...
Click to collapse
How are you getting into download mode?
There was a post in another thread where the person apparently was using the power menu to get into download mode or maybe the adb command.
Have you tried both the old fashion volume +/- and plug in usb cable? Or the adb command?
Do you have access to another computer? Believe it or not sometimes just changing computers will make the difference.
Weird when I replied there was no posts other than the ones on the first page...oh well glad its working now.
Related
Can't get Odin on a WinXP laptop to recognize the Droid Charge. Same machine does recognize my SGS i9000, though. I'm in DL mode properly.
Any suggestions and pointers (url?) for what drivers to install/update that might help me out? I've already tried samsung drivers for USB from Samsung's site and the Fascinate forums, as well as the drivers that heimdall installs.
I've seen people talk about the Verizon USB drivers, but I haven't found them.
edit: nuts, didn't mean to post this in dev section.
distortedloop said:
Can't get Odin on a WinXP laptop to recognize the Droid Charge. Same machine does recognize my SGS i9000, though. I'm in DL mode properly.
Any suggestions and pointers (url?) for what drivers to install/update that might help me out? I've already tried samsung drivers for USB from Samsung's site and the Fascinate forums, as well as the drivers that heimdall installs.
I've seen people talk about the Verizon USB drivers, but I haven't found them.
edit: nuts, didn't mean to post this in dev section.
Click to expand...
Click to collapse
I had the same issue, when you plug your phone in, not in DL mode but just as normal, a drive will open it contains verizon crap and the samsung drivers, install those 1st, then the phone will install when in DL mode
here is the odin you need here
and here is the drivers you need here
a few tips also is make sure your laptop is plugged in, use your original cable that came with the phone, and if your using vista or W7 then right click odin and click properties. Switch to windows XP service pack 3 compatibility mode and save. Then right click again and run as an administrator..
worked first try for me
angry english said:
I had the same issue, when you plug your phone in, not in DL mode but just as normal, a drive will open it contains verizon crap and the samsung drivers, install those 1st, then the phone will install when in DL mode
Click to expand...
Click to collapse
Hmmm...when I plug in in normal mode, no special drive pops up; that explains why I can't see it. I'll try again. The only time I ever use Windows is for Odin, so I'm pretty rusty with this stuff.
cold21blooded said:
here is the odin you need here
and here is the drivers you need here
a few tips also is make sure your laptop is plugged in, use your original cable that came with the phone, and if your using vista or W7 then right click odin and click properties. Switch to windows XP service pack 3 compatibility mode and save. Then right click again and run as an administrator..
worked first try for me
Click to expand...
Click to collapse
Thanks for the links. I have that version of Odin, but not sure those are the same drivers I tried, so I'll give them a shot.
Okay, got it working.
I had USB Debugging turned on. Turned it off and the Verizon crap drive popped up and was able to install the drivers from it. Was a flakey drive mount though, kept disappearing. Driver install squawked about already being installed, but I said install anyways.
Odin 1.3 didn't recognize the phone, but Odin 1.83 did.
Was able to successfully flash the CWM and voodoo kernel. Wish I hadn't at this point...I got the successful conversion of the fs, but now everything screwed up on the phone. Force closes, apps won't open. Looks like a bunch of reinstalls in order.
Just not having much luck with this Droid Charge. Should have stuck with my Thunderbolt only. LOL
Welp I am one of the stupid ones and installed MIUI on my Infuse, and like everyone else, I'm stuck on the boot screen. I looked at the post on the same topic and tried to do it but couldn't get it to work probably becuase the computer says that its an Unknown device instead of a Samsung device.
So my question is what do I do now that my computer doesn't recongize the phone as a device anymore?
Thanks to all that can give help.
http://forum.xda-developers.com/showthread.php?t=1116251
And lesson learned - never install a ROM from another phone.
Yeah I know that now. Foolish mistake I know I shouldn't have made.
But, I have tried using that but when I connect the phone to the computer it shows to be an unknown device and Odin doesn't pick it up at all. My problem is, is that the computer doesn't recognize it as an Android Device anymore. Is downloading the drivers from Samsung going to help?
I'll have to leave that to someone else - I use Heimdall on a Linux box, I've never flashed from Windows.
Oh, ok. Well thanks for your help .
I fixed my problem. What I had to do was get another computer that doesn't have the Samsung Drivers or Kies installed and then install them. Once that was done Odin found the device and I was able to restore it.
So there's a tip for anyone who can't get their device to be recognized by the computer or Odin itself.
Or just uninstall/delete those drivers?
Entropy512 said:
I'll have to leave that to someone else - I use Heimdall on a Linux box, I've never flashed from Windows.
Click to expand...
Click to collapse
i have started to do this to since i got the infuse. ill tell you i dont miss driver issues one bit! linux/bsd/mac/whatever rock as long as you have supported hardware and that is becoming less and less of a problem these days.
re: Now Stuck
You need to try and pull the battery out and put it back see if you can get the phone into "download mode". If you cannot get it into download mode by doing that or using the up/down volume and power key combo then I would suggest that you purchase a "jig" on ebay. (they cost under $10 bucks shipped).
Here is the ebay link for the jig:
http://cgi.ebay.com/Samsung-Galaxy-...0563626533?pt=Cell_Phones&hash=item20ba3eba25
With a jig all you would need to do is to remove battery, plug the little jig into the usb port of phone and replace the battery, then wait 5 seconds or so and the phone will be in download mode allowing you to use Odin3 and flash back to "stock rom" to start with..
Best if you did that using the "Ultimate Unbrick" stock froyo rom after that
you can install infuse 1.5 custom rom or Bionix or the defused custom rom or any other rom.
Here is the link for the Ultimate Unbrick:
http://forum.xda-developers.com/showthread.php?t=1116251
Good luck.
nstong said:
Or just uninstall/delete those drivers?
Click to expand...
Click to collapse
I tried that but it didn't work on my computer, but that's just my computer that could work for someone else. If that doesn't work though, you can get another computer and install the drivers on them and that should work.
SamsTechAnswers said:
I tried that but it didn't work on my computer, but that's just my computer that could work for someone else. If that doesn't work though, you can get another computer and install the drivers on them and that should work.
Click to expand...
Click to collapse
Where are you trying to uninstall the drivers from? I have windows 7 and went to device manager or whatever and took it off there. Then reinstalled kies, worked perfect after.
Sent from my SAMSUNG-SGH-I997 using XDA App
Entropy512 said:
http://forum.xda-developers.com/showthread.php?t=1116251
And lesson learned - never install a ROM from another phone.
Click to expand...
Click to collapse
and.... do not touch if it works properly
I guess this is a good sign. Our phone is gaining popularity because new people are buying it and trying dumb things with it
Hello all,
Firstly thank you for the great development and help the community is providing for GS4G. From the time I bought this phone (few weeks ago), I have been playing around with different ROMs. I try GB roms and ICS roms every now and then. Always go back to GB using 1 Click's.
Yesterday when I was going the 1-Click Heimdall, it failed in between with some error. After this, I am unable to boot into the OS or recovery or download mode. It comes to a screen which tells me that the firmware upgrade was interrupted and asks me to use recovery in Kies. I tried this, but Kies does not even recognize my phone anymore. Windows shows my phone as "unknown device". I tried uninstalling and re-installing Kies, but still no use. I hope there is some way to get my phone back.
I read somewhere about a USB Jig that could get you into download mode. I have ordered it from Amazon and it may take a couple of days. Meanwhile, if any of you can help, it would be great. Thanks!
youre soft bricked, this is fixable. The firmware upgrade interrupted screen is the same thing as download mode. try reinstalling the drivers which i think are found in the sgs4g BIBLE thread. after that, plug in your phone and make it go to the firmware upgrade interrupted screen and see if it installs the drivers. read lumin's guide. it explains everything step by step. im going to try to link it here soon.
EDIT: [GUIDES] Fresh out of box Galaxy S 4G | Heimdall One-Click For Dummies
this is lumin30's guide not mine, i just linked it. thank him.
gs_0523 said:
youre soft bricked, this is fixable. The firmware upgrade interrupted screen is the same thing as download mode. try reinstalling the drivers which i think are found in the sgs4g BIBLE thread. after that, plug in your phone and make it go to the firmware upgrade interrupted screen and see if it installs the drivers. read lumin's guide. it explains everything step by step. im going to try to link it here soon.
EDIT: [GUIDES] Fresh out of box Galaxy S 4G | Heimdall One-Click For Dummies
this is lumin30's guide not mine, i just linked it. thank him.
Click to expand...
Click to collapse
Thanks. I had tried eollie's Heimdall Stock KJ6 + Root. But, I don't remember seeing the driver installation window show up. I tried reinstalling the drivers through Kies couple of times and re-booting. But, still didn't work. I will try what you suggested when I get home.
You should be able to fix it. Goodluck
When you are using the heimdall 1 click does zadig not recognize your phone?
Sent from my SGH-T959V using xda premium
TwitchyEye said:
When you are using the heimdall 1 click does zadig not recognize your phone?
Sent from my SGH-T959V using xda premium
Click to expand...
Click to collapse
When I connect my phone, Heimdall does nothing but says "disconnected". Windows shows that "a device has malfunctioned" and shows "unknown device connected".
Do you have the full heimdall?
Sent from my SGH-T959V using xda premium
TwitchyEye said:
Do you have the full heimdall?
Sent from my SGH-T959V using xda premium
Click to expand...
Click to collapse
I used this Heimdall - http://forum.xda-developers.com/showthread.php?t=1822626
I do remember installing drivers through this Heimdall before when the phone was working.
pmattie said:
Windows shows that "a device has malfunctioned" and shows "unknown device connected".
Click to expand...
Click to collapse
Sounds like you need to run zadig.exe in the Drivers folder of the Windows distribution of Heimdall.
If that doesn't work, right-click on (My) Computer, select Manage, then select Device Manager. In the panel that opens, find your device, right-click on it and you can then look at its properties and potential change the driver there.
(Yes, this kind of shenanigans is another of the reasons I really dislike Windows)
Ok so what you should try is downloading the heimdall suite
https://github.com/Benjamin-Dobell/Heimdall/downloads
Extract and open the drivers folder and run zadig. Click devices/show all devices and if your phone is plugged in and in download mode it should see it. Install drivers and it should say drivers successfully installed. Then run your one-click jar file and it should work.
http://forum.xda-developers.com/showthread.php?t=1358498
The downloads in this post will also get you where you wanna go
Somebody tell me if I led this guy wrong
Lol ya beat me to it!
Sent from my SGH-T959V using xda premium
TwitchyEye said:
Ok so what you should try is downloading the heimdall suite
https://github.com/Benjamin-Dobell/Heimdall/downloads
Extract and open the drivers folder and run zadig. Click devices/show all devices and if your phone is plugged in and in download mode it should see it. Install drivers and it should say drivers successfully installed. Then run your one-click jar file and it should work.
...
Click to expand...
Click to collapse
I tried all this. But, still Zadig shows my phone as "unknown device" and does not install drivers for it. Tried USBDview to remove any instance of Samsung & Android from the drivers. But, still does not recognize my device. Any other suggestions.
Try different USB ports on your computer.
Install Ubuntu (not totally kidding on that one, it will install side-by-side with Windows)
When is that jig getting there? One time I had a similar situation and I built myself a jig and it worked like a charm. Phone goes straight into download mode. I dunno if this will resolve your situation but I'm pretty sure this isn't the first time we've seen someone with this problem and then after trying several different computers and USB cables we usually say maybe your phone's USB Jack is messed up? And then the thread goes dead.
Sent from my SGH-T959V using xda premium
Have you uninstalled any drivers? Download and install the drivers from the bible thread if you haven't. Like suggested, try different USB ports and different USB cables. Sometimes it takes more than one try for some reason.
pmattie said:
Any other suggestions.
Click to expand...
Click to collapse
Have you rebooted your comp at all?? If no that might be the problem.
SUCCESS !!
Thanks a lot for all your suggestions.
Here is what worked:
- I opened device manager and uninstalled ALL USB devices (Yes ALL, not just Samsung, Android etc) and unfamiliar Storage devices.
- Then I rebooted once so that all other device drivers could be installed.
- Then I rebooted a second time and let it install any remaining drivers.
- Then I plugged in the phone and it installed the driver and now it started showing the correct device name
- Now, I ran the Heimdall 1-click and it opened offered to re-install drivers. I did this.
- After all this, I was able to get 1-Click GB rom installed and now back to VB.
(I think the key was "uninstall all USB devices" and "reboot TWICE")
glad you got it to work. ive had my share of soft bricks with this device and it always takes something different to get it to run right. im starting to think that my computer is alive because of this reason because it just doesnt like to play nice sometimes. LOL
Hey, I managed to brick my Infuse 4G trying to get Entropy's CM9 on it. I flashed it once and it was stuck on the samsung screen like it was suppose to but when I tried to go to CWM, I would get various colors, mostly blue and orange on the top and a big grey spot in the middle. I am trying to get it back to stock but I am having issues getting my computer to recognize that I plugged my phone in, neither Hermidall nor Odin recognize when my phone is plugged in in Download mode. I have downloaded Kies. Any suggestions?
If you had read any of the numerous other posts on this you would find that Kies creates issues so get rid of it and the colors are caused by the Froyo bootloaders on your phone, something that is fixed when you get GB bootloaders.
Watch this video for a how to on installing Heimdall
http://www.youtube.com/watch?v=sHyY7WHx4zc
Use this as a guide to actually installing Heimdall
http://forum.xda-developers.com/showthread.php?t=1524081 , many thanks to qkster.
If you do everthing correctly and completely, it will get you to stock GB.
From there you can go to ICS and then if you want, to JB. Do not skip ICS and try going to JB. Hope this helps.
Pony Express said:
If you had read any of the numerous other posts on this you would find that Kies creates issues so get rid of it and the colors are caused by the Froyo bootloaders on your phone, something that is fixed when you get GB bootloaders.
Watch this video for a how to on installing Heimdall
http://www.youtube.com/watch?v=sHyY7WHx4zc
Use this as a guide to actually installing Heimdall
http://forum.xda-developers.com/showthread.php?t=1524081 , many thanks to qkster.
If you do everthing correctly and completely, it will get you to stock GB.
From there you can go to ICS and then if you want, to JB. Do not skip ICS and try going to JB. Hope this helps.
Click to expand...
Click to collapse
Thanks for replying. The issue is that my computer and my friend's computer do no realize when I plug it into the computer in Download mode, on the of chance I sucessfully get it into that mode. I have tried with and without the Kies software.
Lefaid said:
Thanks for replying. The issue is that my computer and my friend's computer do no realize when I plug it into the computer in Download mode, on the of chance I sucessfully get it into that mode. I have tried with and without the Kies software.
Click to expand...
Click to collapse
No prob... it can be a process the first time... after that it is a breeze.
Make sure you have the Infuse drivers on your computer (I am assuning you are running windows) here, courtesy of bigjoe2675 are the drivers.
http://d-h.st/sKF
Pony Express said:
No prob... it can be a process the first time... after that it is a breeze.
Make sure you have the Infuse drivers on your computer (I am assuning you are running windows) here, courtesy of bigjoe2675 are the drivers.
http://d-h.st/sKF
Click to expand...
Click to collapse
I tried installing the setup file in the driver and the computer still does not recognize my phone.
I have been without Windows OS for a couple of months and will be w/o for another 3 weeks, sorry.
You must uninstall kies and do not have your phone plugged in to the computer during the driver install. If I remember correctly, once you download the zip with the drivers to the computer, you have to extract them and then run the setup. Once that is done, reboot the computer and plug your phone into a usb port on your puter that you know to be working.
Should you go forward and use Heimdall, use the same port each time.
Again, I am assuming you are using Windows. With Linux there is no need to install drivers, it recognizes the phone. With mac- no idea.
Maybe try this: http://forum.xda-developers.com/showthread.php?t=1683036
Can also use the search above -- 'computer won't recognize phone'
Pony Express said:
I have been without Windows OS for a couple of months and will be w/o for another 3 weeks, sorry.
You must uninstall kies and do not have your phone plugged in to the computer during the driver install. If I remember correctly, once you download the zip with the drivers to the computer, you have to extract them and then run the setup. Once that is done, reboot the computer and plug your phone into a usb port on your puter that you know to be working.
Should you go forward and use Heimdall, use the same port each time.
Again, I am assuming you are using Windows. With Linux there is no need to install drivers, it recognizes the phone. With mac- no idea.
Maybe try this: http://forum.xda-developers.com/showthread.php?t=1683036
Can also use the search above -- 'computer won't recognize phone'
Click to expand...
Click to collapse
I do have a Linux setup ready. Is there a way I can do it with Linux? Thanks again for being so helpful.
Edit: I have been toying with it on Ubuntu and am having the same issue of the computer not recognizing it as far as I can tell. I did get Heimdall working on it.
Lefaid said:
I do have a Linux setup ready. Is there a way I can do it with Linux? Thanks again for being so helpful.
Edit: I have been toying with it on Ubuntu and am having the same issue of the computer not recognizing it as far as I can tell. I did get Heimdall working on it.
Click to expand...
Click to collapse
The only thing you should have to do for Ubuntu to recognize the phone is enable usb debugging in settings on the phone and after that, enable it, most likely from your drop down menu on the phone.
Heimdall will be a .jar file - let me know if you need help getting it to open.
Pony Express said:
The only thing you should have to do for Ubuntu to recognize the phone is enable usb debugging in settings on the phone and after that, enable it, most likely from your drop down menu on the phone.
Heimdall will be a .jar file - let me know if you need help getting it to open.
Click to expand...
Click to collapse
Shame the phone is bricked right now ;/ . Back to my Windows computer. Thanks for trying to help but I think something is busted in my phone that isn't allowing it to tell the computer what it is or something. I don't know. I am going to try my friends computer to see if it is something weird with my own Thanks again for trying to help. If I find a solution, I will post it.
Hello everybody,
I am new to the forum and also new to Androids. After years of using iPhones and finally becoming fed up Apple, I've decided to try something new (please don't judge my prior smartphone selection and start posting opinions about the 2 operating systems, I do not want this thread to turn into one of the "battle of the phones" thread that I've experienced many times on iPhone forums). My friend recently got an S3 and had no use for his Galaxy S 4g, so he gave it to me so that I could try out an Android. There was one issue though, he said that the phone would not get past the Galaxy S screen and would keep re-booting itself (stuck in a boot loop). He said if I could figure out a way to fix it then it's mine.
That being said, here's my dilemma. I've tried many different methods to get the phone out of a boot loop. The first method I tried was putting the phone into restore mode and selecting the "reinstall packages" option. After this executes I get the message:
E:Can't mount /dev/block/mmcblk0p1
(no such file or directory)
E:Can't mount SDCARD:update.zip
Installation aborted.
After some further research I discovered a nice little program called Odin I read a lot about Odin and how to properly use it. After trying at least 5 different methods to get the phone into download mode with no success, I purchased a jig. The jig did the trick and instantly put me into download mode, I was ecstatic and hopeful that I could now fix the phone with Odin. I connected the phone to my PC in download mode, but Odin still didn't recognize the phone (I tried many versions of Odin, 1.85, 1.87, and the most recent 3.07). I do have the latest drivers for this phone, which I downloaded from Samsung's website. The phone will charge through the computer but the computer does not recognize it otherwise and will not allow me access its mass storage (I am running Windows 7 64 bit). I have tried using a different USB cable, and I have tried to use a different PC, the other PC I used popped up with a message saying that Windows could not successfully download the drivers (that was after I downloaded the drivers from Samsung's webpage and plugged the phone into the computer). I've even tried transferring stock firmware onto an external SD card and loading it onto the phone from restore mode (is that even possible to do?). I have also tried running Odin in compatibility mode, still didn't detect the phone. I should probably also mention that Kies Mini also does not recognize the phone. I asked my friend if he ever tried rooting this phone and he said no, so I'm assuming this issue has nothing to do with a failed attempt to root.
I really want to get this phone working, but I have run out of options to try. I am hoping that someone on here has a solution for me from a similar experience. After reading through the forum, I have noticed that people on here are very helpful and also very friendly; something that I can say is very different from some of iPhone forums I've used. I apologize if there is already a similar thread to mine, I've read through many threads and none of the solutions have worked for me. I also apologize for my first post being so lengthy, I just wanted to state all of the methods that I've tried to fix this phone. Thanks for your replies.
Hi hubbs134
You have come to the right place.
First,
I suggest you read a little bit about this phone and how to put it in Recovery (by holding Volume Up + Volume Down + Power until you see the SGS4G splash screen) and Download modes, it will help you in the future.
You can find it all in the Wiki.
Second, use this guide to One-Click Heimdall your way to Stock KJ6 2.3.6 Gingerbread ROM (latest official ROM for this phone).
If you use this file (instead) with that guide, you will also get phone rooted, or else you will need to make another flash of a rooted kernel (as the guide suggests).
Now, if you have the official latest stock, but still want some ICS/JB lovin', if you have CWM recovery v5 (you will see the recovery info once you're in that mode), you can flash CM9/AOKP/HebMIUI/UltraGen/RemICS/CM10/Slimbin/etc. etc. etc. ROMs.
Enjoy and welcome aboard!
P.S what the @#%#$ were you doing with an iphone ?
itzik2sh said:
Hi hubbs134
You have come to the right place.
First,
I suggest you read a little bit about this phone and how to put it in Recovery (by holding Volume Up + Volume Down + Power until you see the SGS4G splash screen) and Download modes, it will help you in the future.
You can find it all in the Wiki.
Second, use this guide to One-Click Heimdall your way to Stock KJ6 2.3.6 Gingerbread ROM (latest official ROM for this phone).
If you use this file (instead) with that guide, you will also get phone rooted, or else you will need to make another flash of a rooted kernel (as the guide suggests).
Now, if you have the official latest stock, but still want some ICS/JB lovin', if you have CWM recovery v5 (you will see the recovery info once you're in that mode), you can flash CM9/AOKP/HebMIUI/UltraGen/RemICS/CM10/Slimbin/etc. etc. etc. ROMs.
Enjoy and welcome aboard!
P.S what the @#%#$ were you doing with an iphone ?
Click to expand...
Click to collapse
Thanks for your reply, I have read a lot about this phone and know how to get into download and recovery mode. I tried the method you mention, however, when running the command window I get errors for both roms you suggested (i attatched a screen shot of the errors I'm getting). Do you know how I can fix these errors so that I can proceed with the rest of the tutorial? Thanks.
PS I only had an iPhone because I had yet to discover how bad a** Androids are
It sounds like you can't use Odin because of a windows issue. Try installing linux. I use ubuntu
Sent from my HTC One X+ using xda app-developers app
---------- Post added at 07:48 AM ---------- Previous post was at 07:47 AM ----------
You can also run as live CD or in a virtual machine
Sent from my HTC One X+ using xda app-developers app
hubbs134 said:
Thanks for your reply, I have read a lot about this phone and know how to get into download and recovery mode. I tried the method you mention, however, when running the command window I get errors for both roms you suggested (i attatched a screen shot of the errors I'm getting). Do you know how I can fix these errors so that I can proceed with the rest of the tutorial? Thanks.
PS I only had an iPhone because I had yet to discover how bad a** Androids are
Click to expand...
Click to collapse
No need to replace PC OS...
1. Uninstall all your Java versions and Samsung drivers and reboot.
2. Reinstall Java 1.7u..
3. Follow the guide, it should work.
When you reinstall the driver through Heimdall - it will appear as Gadget device.
Good luck !
itzik2sh said:
No need to replace PC OS...
1. Uninstall all your Java versions and Samsung drivers and reboot.
2. Reinstall Java 1.7u..
3. Follow the guide, it should work.
When you reinstall the driver through Heimdall - it will appear as Gadget device.
Good luck !
Click to expand...
Click to collapse
I second this... This should fix your driver issues.
Thanks for both of your replies. Odin detected my friends GS3 so I know it's not a Windows issue.
itzik2sh I did what you suggested and now got the command to function properly. I am going to try and finish the tutorial, I will be back soon with results. Thanks.
The phone is in download mode with Heimdall One-click 1.3.1 running and nothing is popping up in the command window. Neither is showing that the device is connected. Any suggestions? Thanks
Irish Enigma said:
I second this... This should fix your driver issues.
Click to expand...
Click to collapse
I forgot to mention that I can here the sound that a device was just connected to the computer via USB, and a message pops up saying USB device not recognized. When I click on the message it says "One of the USB devices connected to this computer has malfunctioned, and Windows does not recognize it."
Tried a different port? Tried second different port with a different USB cable?
itzik2sh said:
No need to replace PC OS...
1. Uninstall all your Java versions and Samsung drivers and reboot.
2. Reinstall Java 1.7u..
3. Follow the guide, it should work.
When you reinstall the driver through Heimdall - it will appear as Gadget device.
Good luck !
Click to expand...
Click to collapse
Theraze said:
Tried a different port? Tried second different port with a different USB cable?
Click to expand...
Click to collapse
Ok I got the device connected and I got Zadig running, however, there is no option for "Samsung USB Composite Driver" on the drop down list, on "gadget Serial", "Gadget Serial Control (interface 0), and "1.3 HD Webcam (Interface 0)'. What should I do?
On the one-clicks, you don't actually want to use zadig. Apparently it conflicts, which is awesome for something that gets released WITH the tool.
If you're doing manual Heimdall, make sure you've told zadig to list all devices in the menus. Your phone should show up after that.
If you're using a one-click, make sure you're using a USB port on your computer where you have NOT installed zadig, Kies, or Samsung official drivers. Follow the steps in the one-click religiously, and it should cooperate.
Follow the guide %100 then Odin should work
Sent from my HTC One X+ using xda app-developers app
Ok I ended up getting the phone to register in Odin. I flashed it with the stock rom in Odin and it said success. The phone booted and it seemed like it was going to work but then the recovery menu came up. I posted a screen shot of what it says, what action should I take from here? Thanks
I am also in a different boot loop now, before it would load to the first screen (black screen saying samsung galaxy 4g) then restart, now it boots to past the splash screen to where it says "Samsung" and then reboots back to the screen where the pink letters roll across the whole screen. I don't need to flash bootloaders do I?
Looks like recovery is broken or the updater script on the ROM you're trying to flash is messed up. Flash a new and the proper recovery via Odin then download a new Rom and either sideload it or mount usb from recovery and push it... Or you could just use Odin XD
EDIT: Samsung's are easy to brick and hard to debrick it may take a couple of trys
Sent from my HTC One X+ using xda app-developers app
Irish Enigma said:
Looks like recovery is broken or the updater script on the ROM you're trying to flash is messed up. Flash a new and the proper recovery via Odin then download a new Rom and either sideload it or mount usb from recovery and push it... Or you could just use Odin XD
Sent from my HTC One X+ using xda app-developers app
Click to expand...
Click to collapse
OK GREAT NEWS! After flashing with Odin and that screen popping up, I clicked update from SD card, which failed. I then click system reboot, which brought me into the new boot loop. I put back into download mode and re-flashed with One-Click. Same recovery menu came up as before but when I clicked reboot system it hung at the "Samsung" black screen (after the splash screen) for about 20-30 seconds and then booted up I'm afraid to turn the phone off and see if it reloads lol. Is it safe to say that it is fixed? Or should I still follow your advice and run the proper recovery in Odin and then sideload a new rom? Or take different action? Thanks for all your help guys! Everyone gets a thanks click for being so helpful and friendly on an unhappy/confused/pissed off/ now happy new Android user!
Ok I just put my Tmobile simcard in and the phone is not detecting the sim. Any suggestion?
The IMEI number and baseband both say "unknown", I'm assuming this has to do with the simcard not registering?
hubbs134 said:
The phone is in download mode with Heimdall One-click 1.3.1 running and nothing is popping up in the command window. Neither is showing that the device is connected. Any suggestions? Thanks
Click to expand...
Click to collapse
What Heimdall package are you applying ?
After JAR package runs you are ready to go.
As I wrote, according to guide you can reinstall "Gadget" driver.
EDIT :
Enigma, if you're not an owner of an SGS 4G please stop advising.
Odin is not the common way since we have MTD ROMs and it had its problems.
hubbs134,
blank IMEI is a serious problem. without a proper IMEI your device is everything but a phone.
Try this : take battery off, press the POWER button for 10 seconds, leave device untouched for 15 minutes and then put battery back and power up.
This could bring your IMEI back to life. If not... maybe another flash will help.
P.S
The 3e recovery image you put on post #14 is a snapshot of the the stock unrooted ROM recovery.