We got an Android Rom development forum and an Original Android Development forum, but I don't see any stock roms in the ORIGINAL DEVELOPMENT FORUM.
Original Develeopment says to me that there are just the STOCK ROMS in it and not custom ones. These have to go to the other forum, I think.
--------
Well now to my question. Is there anywhere a stock rom without vodafone etc. crap in it?
I'm looking for such a rom.
The roms from the development forum do not work. I just get a turned off phone after the installation and when I turn it back on it gets to a battery screen for a short time and then it turns itself off again.
I tried
Super Jelly Bean
NZXT
Gimlo
--------
Data from the phone
Model - ST21i
Andoirdversion - 4.0.4
baseband - 7x25A_M:2045.40.00.77.001.005_A:2045.40.00.77.002.046
Kernel - 3.0.8-perf [email protected] #1
Build - 11.0.A.4.25
--------
Thanks in advance
You do know that you have a flashable stock firmware, from which you can remove the bloat (post here, maybe?) and flash?
And I think Original Development means stuff that's built from source. Development is stock-based, or something-in-original-development-based.
Hey..Lol
Original development means not stock based...they are the rims compiled directly from a 10 gb source code..
Modded stock roms are in android development sections...
Thank you
Sent from my C1604 using xda app-developers app
But where are the stock roms without any bloatware as mine is from Vodafone and there are a lot of programs on it. I just want a plain system like cm.
Related
Still an Android noob but i may get the Captivate but can you get stock android 2.1 in a ROM or is that impossible?
champ0497 said:
Still an Android noob but i may get the Captivate but can you get stock android 2.1 in a ROM or is that impossible?
Click to expand...
Click to collapse
I was a noob a few weeks ago so I will give you some advice:
Read all you can first, then reread stuff all over again. Development Forum is a good place to start.
"Stock" android always has extras - device drivers for a phone, kernel enhancements, etc. If you are looking for a build without AT&T stuff, then there are some i9000 Roms, that can be installed, but you need to install the Captivate kernel. All of these are development builds and have some bugs. They also are for the EU Galaxy, and they have different Samsung software included as well as different menus.
There are guys working on building a plain vanilla 2.1 ROM with the source code, but it will take some time.
This is my second time playing with my phone and i hope this time i didnt brick it. I've just flashing my Xperia X10i from 2.1 eclair to Gingerbread 2.3.3. Flashing it using the Generic 3.xx download from this forum. And im glad i finally done it. Who cares... To the question.
1> What is ROM? Everybody talking about changing Rom, Stock Rom, this Rom, that Rom.. what is the meaning of ROM for android? Flashing Rom and Flashing Firmware is the same thing??
2> What is BASEBAND??
3> What is Generic Number?? Build number?? i've change flash my build number from 2.1.A.435 to 3.0.1.G.0.75 and my baseband version,kernel and Android version change along with it.
HELP ME PLEASE!!
kayzix said:
This is my second time playing with my phone and i hope this time i didnt brick it. I've just flashing my Xperia X10i from 2.1 eclair to Gingerbread 2.3.3. Flashing it using the Generic 3.xx download from this forum. And im glad i finally done it. Who cares... To the question.
1> What is ROM? Everybody talking about changing Rom, Stock Rom, this Rom, that Rom.. what is the meaning of ROM for android? Flashing Rom and Flashing Firmware is the same thing??
2> What is BASEBAND??
3> What is Generic Number?? Build number?? i've change flash my build number from 2.1.A.435 to 3.0.1.G.0.75 and my baseband version,kernel and Android version change along with it.
HELP ME PLEASE!!
Click to expand...
Click to collapse
1. A ROM is the firmware, or Operating Sytem, of your phone. It's a package that contains the OS, drivers, programs and other odds and clods that make your phone work!
2. A baseband is a special package (kind of like a ROM) that controls the radios in your phone (cellular radio [phone part], bluetooth, WiFi etc.)
3. A build number is the version of the Operating System you are installing. Every manufacturer uses different naming systems for their builds, but usually the higher the letters/numbers, the newer the build. A new build will often contain a new baseband, and a new kernel. If you're lucky, you can sometimes even get a new OS version (as you did)!
Hope this helps!
pudding no root?
ok guys/girls I have been looking on here for a week and a half now but I flashed pudding and im unlocked as well but no root access obviously something i am not doing right. I thought pudding would give root but maybe not? I also have tried booting in recov. but then I can't find anything in there that says root or whatever.
I have the superuser app. dosent work as well as tita. says not rooted? It also says that a newer version is released and that it was put on my sd card but can't find it?
Any help is welcome or just point me to the right thread.
No dummie responses as they are a waste of your intellectual ability when you could have just used that energy to respond with help.
Mahalo
Try neopeek.com
Sent from my TIADROID CWM BETA2 using Tapatalk
Many builds for different phones available at neopeek.com and tiad8.com. don't trust the retarded aaarg(troll) in this forum.
Sent from my FroyoB THUNDERBOLT V1 using Tapatalk
proč když chci psát do fora rom musím nejdrív napsat 10 príspevkú sem.?
Thank you very much. You're the best! God bless!
good day to all..
im new with this phone..this one is a korean version of galaxy s1(shw m110s)
im confused with how to install custom roms here...
what do i need to download..a kernel or a custom rom?
thanks xda
Moved to General Q&A.
The kernel allows the ROM to communicate with the hardware specific to your device. All ROMs have a kernel build-in. If the custom ROM is designed fir your phone, it will work fine. If the ROM was intended for a device in the same family as yours, you can flash that ROM, then flash the kernel for your phone, & it'll work. If the ROM was designed for a completely different device, nothing will get it to work.
Remember to always do a nandroid backup before flashing stuff!!
-- Sent from my TouchPad using Communities
shw m110s
post-mortem said:
The kernel allows the ROM to communicate with the hardware specific to your device. All ROMs have a kernel build-in. If the custom ROM is designed fir your phone, it will work fine. If the ROM was intended for a device in the same family as yours, you can flash that ROM, then flash the kernel for your phone, & it'll work. If the ROM was designed for a completely different device, nothing will get it to work.
Remember to always do a nandroid backup before flashing stuff!!
-- Sent from my TouchPad using Communities
Click to expand...
Click to collapse
thank you sir...now i know what to do..i just need to download the latest custom rom for korean galaxy s...anyway sir..can you send me a link where i can find and download the latest and stablest rom for my device..it would help me a lot..thank you in advance..Godbless..
Sent from my SHW-M110S using xda app-developers app
Sir good evening..i recently read forums about the gfan wf07 sp8..my question is...what is the android version of this rom and is there a jellybean and ics rom for m110s?pls let me know sir...thank you in advance..im still scared to flash my phone..i want to flash it to stable rom because it has a bug...my power button is not working so i cant access reboot,screen shots,hot reboot,shutdown etc..im using tegrak kernel build 39 and tegrak app..my android version is 4.1.1..and im still wondering what is the step by step process of flashing my phone..
What is the first thing to do??
Thank you sir
Firstly, sorry I had posted same question in (I don't know where). But I need to post it here in Verizon.
I have installed HE update, Rooted, Unlocked, IMEI backed up, Recovery installed.
#1 Do custom ROMS include the baseband or not? Meaning, does it override the HE I have installed?
#2 Do ROMS need to be specifically designed for HE baseband, for me to flash them and work properly?
Thanks.
PS I am waiting for the Milestone release of AOKP, how will I know if it is made for the HE, will mess up because of me having HE? Is it buried in the AOKP change log, or does the developer control that?
No and no
I may be wrong, but as far as I know, AOSP ROMs (including AOKP) don't build for a particular radio. Until we get an official Verizon TouchWiz jellybean update, the RIL and other networking tweaks in AOSP roms are made from scratch, and should work with any radio. Some radios may work better or worse for you with any given ROM, so you might as well try them all until you find the one that works best for you.
Sent from my SCH-I535 using Tapatalk 2
First things first....You didnt know where to post a question....there is a q&a section where you posted....dont be ignorant.
Thread moved to q&a.
His two quick questions ,one is it possible too flash stock android on s6 and then does anyone have a link too roms I can play with still very new so bear with me and have done a couple things but trying get recourses.
Sent from my SM-G925F using XDA Forums
no stock android roms available yet and i doubt there ever will be due to the custom samsung processor. if you want some touchwiz roms check out the android development subforum.
You can try Google Launcher for the "stock android feel."