Database Info

[ROOT] Samsung Galaxy Pocket Plus GT-S5301

Rooting procedure for SAMSUNG Galaxy Pocket Plus ( GT-S5301 )
WARNING!!! This solution provided as is (with no warranty of any kind). Be careful because the described operations rather dangerous and possibly can brick your device. Author is not responsible for your device damage.
IMPORTANT: Usage of this method will affect the state of the "Custom BIN down" counter in your device. This means that you may have problems with official warranty.
OTHER NOTICES: Solution based on ICS 4.0.4 Russian Stock firmware. It will not affect the data on your device (contacts, files etc.). No wipe\hard reset needed.
Step 1. Getting software
1. Download Odin 3.0.7 here
2. Download modified stock recovery here
3. Download update package for rooting here (downloaded from here Thanks to Phil3759)
4. Install Samsung drivers\kies from this page
P.S. Sorry for ugly file storage solution - google drive. If it will open the zip archive just click "File" menu and click "Download" (or use Ctrl+S combo).
Step 2. Flash the updates
1. Switch off the device. Hold "volume down"+"home" buttons and press power button. When device switch on release the power button but continue to hold volume down and home until Download mode warning appear. Plug in the USB cable and press volume up button to continue. The device will load in ODIN download mode.
2. Run ODIN 3.0.7. Don't change any setting (checkboxes ) - leave them in default state. Your device should appear in "ID:COM" part of the screen as serial device (i.e. "COM38") - if not check if your USB port is functional and Samsung drivers installed correctly.
3. Click on PDA button and chose modified recovery file saved during step 1.2. Don't rename or decompress the file - otherwise it will not work.
Wait until ODIN decompress the package and check the checksums. After it just press START button and wait until the process is over.
4. Copy update package for rooting on SD card and put the card in device's slot.
5. Switch off your device again. Hold "volume up"+"home" buttons and press power button to switch on. Don't release volume up and home until the recovery loaded. Using volume up and volume down buttons navigate to menu item "apply update from external card" and press power button to commit operation. Then navigate to Root_Superuser_3.1.3......zip file and press power button again.
6. Done. Your device should be rooted now. You can check it with various free programs like Root Checker available at Google Play.
You can restore the stock recovery using the same flashing procedure as described above. The stock recovery image is available here
====================
Additional notices:
- I will upload the full stock firmware repacked for ODIN in a couple of days. You can use it to restore your device to default state (except the Custom BIN down counter).
- If the counter really bothering you - just wait a little - I'll upload pre-rooted system partition package which does not affect the counter.
- Do not try just blindly install the CWM or TWRP recovery packages made for another devices. It will not work and can cause some problems because at least one difference is crucial - recovery.fstab file in most of cases will contain wrong information about partitions so you can brick your device. Now I'm working on porting CWM recovery for s5301 and I hope it will not take much time.
Take care
=============================================================================================
=============================================================================================
2013-05-27 UPDATE: CWM recovery (GUI issues) ***THIS ONE IS OBSOLETE - USE NEXT SECTION BELOW "UPDATE: Working CWM recovery (GUI problems fixed)"***
---------------------------------------------------------------------------
CWM Recovery for S5301 (coriplus) is now available. Unfortunately there is still an issue with screen resolution but I suppose I'll fix it very soon. Despite an uncomfortable picture those people who needs backup\restore feature urgently can use it right now. Everything seems to be functional but if you discover some issues - please let me know.
1. Fakeflash zip image is here. Use it from previousely flashed Hacked Stock recovery: pure stock recovery will not load it.
To run it - put the update.zip to sdcard, boot to recovery, navigate to "apply update from external card" and choose the update.zip. Done! Now you are in CWM recovery and you can backup\restore your system. After rebooting the recovery you will see the Hacked Stock recovery again (this is what fakeflash means - CWM loads in memory but after reboot you have your old recovery again. So keep the update.zip on SD card to use it again).
2. ODIN image is here. This one for those who really hates the stock recovery and ready to run CWM permanently even with ugly screen resolution. Flsh with ODIN as described above.
When I fix the screen resolution I'll inform you about it here.
Enjoy.
=============================================================================================
=============================================================================================
2013-05-31 UPDATE: Working CWM recovery (GUI problems fixed)
---------------------------------------------------------------------------------------------------------
CWM User Interface fixed
1. Fixed CWM as fakeflash update.zip is here
2. Fixed CWM as ODIN image is here
Enjoy...
CURRENT STATUS:
-Rooting ...DONE
-CWM recovery ...DONE
NEXT STEPS:
- CM10.1 is in progress
=============================================================================================
=============================================================================================
2013-06-08 UPDATE: Pre-rooted image
---------------------------------------------------------------------
- System image for ODIN (pre-rooted) - does not affect the bin down counter. Link is here
=============================================================================================
=============================================================================================
2013-06-13 UPDATE: The way how to get device rooted and CWM recovery flashed without affecting the counter
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
There is a way to get root and CWM recovery without affecting the down bin counter:
Step 1: Flash the pre-rooted system partition via ODIN (it will not affect the counter and will not erase your personal data). Now you have rooted device but it is still has useless stock recovery.
Step 2: Copy recovery.img on SD card and insert it in your device.
Step 3: Turn the device on, wait untill OS loaded. Go to Settings -> Developer options and switch on the Usb Debugging.
Step 4: Connect USB cable, choose "Camera PTP" in USB PC Connection menu on your device - this menu appeares in notification area (that's important to get your sdcard mounted).
Step 5: Go to console on your PC and execute the following commands:
$ adb shell
[email protected]:/ $ su
[email protected]:/ # dd if=/mnt/extSdCard/recovery.img of=/dev/block/mmcblk0p6
Voila! You have your device rooted, you have CWM recovery flashed and the down bin counter wasn't affected.
=============================================================================================
=============================================================================================
2013-06-13 UPDATE: Russian Stock Firmware S5301XXAMC1 repacked for ODIN
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
As promised please find attached full stock firmware adapted for flashing with ODIN. It's non-rooted, with stock recovery. It will not erase your data so do not forget to perform factory reset if you need it.
=============================================================================================

Realy tanks, that post save my bone, im try to up with another post but get a soft brick, now im have my cell live again and rooted, waiting for mod roms and the CWM for us, tnks... again...

thank you very much it's work fine

CWM Recovery (Alpha) is available - see the first post update ( 2013-05-27).

Fixed CWM is available
Fixed CWM is available as fakeflash and ODIN image. See "2013-05-31 UPDATE" section in main message

Fixed CWM is available
blearreaz0n said:
Fixed CWM is available as fakeflash and ODIN image. See "2013-05-31 UPDATE" section in main message
Click to expand...
Click to collapse
which one is no change flash counter

Tnks
blearreaz0n said:
Rooting procedure for SAMSUNG Galaxy Pocket Plus ( GT-S5301 )
NEXT STEPS:
- CM10.1 is in progress
=============================================================================================
Click to expand...
Click to collapse
Tnks again, Im still waithing!! :fingers-crossed:

Hi, I didn't have an external sd card at this moment so what I did was flash CWM and then sideload the root package, pretty simple, so you can add this method as an alternative, it worked pretty good.

Recovery packages and counter
tarekmorsy said:
which one is no change flash counter
Click to expand...
Click to collapse
1) All fakeflash versions does not affect the counter (only the ODIN flashed images do it).
2) All fakeflashes are temporary (just loading in memory and active until reboot).
3) Unfortunately the stock recovery doesn't aloow to load CWM fakeflash or rooting package, so you need to flash CWM or at least hacked stock recovery via ODIN (an this operation will definitely affect the counter).
Take care

y3kt said:
Hi, I didn't have an external sd card at this moment so what I did was flash CWM and then sideload the root package, pretty simple, so you can add this method as an alternative, it worked pretty good.
Click to expand...
Click to collapse
Obviously the sideload should work ok as it is one of CWM features After you flashed CWM you can use all its' tools - sdcard is just simple common scenario. Anyways thanks for feedback - I'll add notice regarding adb sideload in the main post )

blearreaz0n said:
1) All fakeflash versions does not affect the counter (only the ODIN flashed images do it).
2) All fakeflashes are temporary (just loading in memory and active until reboot).
3) Unfortunately the stock recovery doesn't aloow to load CWM fakeflash or rooting package, so you need to flash CWM or at least hacked stock recovery via ODIN (an this operation will definitely affect the counter).
Take care
Click to expand...
Click to collapse
Thanks

Almost forget - I've uploaded the prerooted system.img as I promised (check 2013-06-08 UPDATE section of the main post in this thread).
Use ODIN to flash this image (PDA section).
It will not affect the counter. All your applications and personal data will survive because they are on another partition, but anyway It's strictly recommended to make a backup copy before flasing. As a result you'll get the rooted device without replacing stock recovery and without affecting the "down bin counter".
Sent from my GT-S5301 using xda app-developers app

I didn't see that
blearreaz0n said:
Almost forget - I've uploaded the prerooted system.img as I promised (check 2013-06-08 UPDATE section of the main post in this thread).
Use ODIN to flash this image (PDA section).
It will not affect the counter. All your applications and personal data will survive because they are on another partition, but anyway It's strictly recommended to make a backup copy before flasing. As a result you'll get the rooted device without replacing stock recovery and without affecting the "down bin counter".
Sent from my GT-S5301 using xda app-developers app
Click to expand...
Click to collapse
very good
much thanks

Please help i am from south africa and will this work for SA firmware i just want root nothing much... And please tell me step by step procedure am kind of confused.
Sent from my GT-S5300 using xda app-developers app

ultimat3m3 said:
Please help i am from south africa and will this work for SA firmware i just want root nothing much... And please tell me step by step procedure am kind of confused.
Sent from my GT-S5300 using xda app-developers app
Click to expand...
Click to collapse
Actually the first post in this thread contains step-by-step description of rooting process. And it should work for any s5301 device. But judging by the signature of your post, you have s5300 device which is copletely different. So I suppose you have to search this forum for solution developed exactly for your device...
Sent from my GT-S5301 using xda app-developers app

For those who wants the root and cwm but wishes to keep the counter untouched...
Please check the following section of the first post: "2013-06-13 UPDATE: The way how to get device rooted and CWM recovery flashed without affecting the counter"

Full Stock Firmware adapted for ODIN
If you need to restore stock firmware on your device, please check the following section of the first post in the current thread "2013-06-13 UPDATE: Russian Stock Firmware S5301XXAMC1 repacked for ODIN"

Okay russion firmware will work on mine?
Sent from my GT-S5300 using xda app-developers app
---------- Post added at 11:28 PM ---------- Previous post was at 11:07 PM ----------
My firmware S5301XXALK3
Sent from my GT-S5300 using xda app-developers app

ultimat3m3 said:
Okay russion firmware will work on mine?
Click to expand...
Click to collapse
Yes. It should work on any coriplus (S5301). I flash it on UAE device for example.
Sent from my GT-S5301 using xda app-developers app

Thanks could u pls upload root file on and odin thru a different server i cant download it via mobile and my laptop doesnt have internet... I only hqve the image file of ...rar.rar :beer:
Sent from my GT-S5300 using xda app-developers app

[ROOT][GUIDE]SGS4[I9506-E330s][DOWNLOAD][4.4.2 SUPPORT]

Please read the guides below before asking questions
========================================================================================================================
This CWM and Root Method is tested from many users and at least by me on this devices GT-I9506 and SHV-E330S!!
========================================================================================================================
USE THIS GUIDE WHEN YOU KNOW WHAT YOU DO AND YOU DONT CARE ABOUT KNOX WARRANTY 0x1b !!!
IF YOU DONT WANT TO VOID YOUR KNOX WARRANTY STOP READING THE TEXT BELOW AND GO OUT OF THIS THREAD..... Thanks !!!
========================================================================================================================
----- SHORT DECLARATION - ODIN3 -----​
PDA refers to the build version of the firmware
Phone refers to the baseband/modem version
CSC is the consumer software customisation and is specific to geographical region and carriers. It contains the software packages specific to that region, carrier branding and also APN settings for data connection, MMS etc for your service provider.
CSC has nothing to do with what languages the firmware supports and it will not add keyboard language support either.
.PIT refers to the partition information table you only need it if you screw up your partition table or if the firmware specifically requires it because of a change in the partition table layout. It's very likely you may never have to use this.
If the package only contains one .tar archive then it will have everything, pda+phone+csc, in the one file.
If it has multiple .tar archive then:
• The .tar with modem in the name is the phone/baseband bit of the package
• .tar with csc/multi-csc in the name is the csc bit of the package
• .tar with code/PDA in the name is the PDA part of the firmware package
If this is the case you will need to put these .tar archives in the specific areas of Odin to flash the update
Click to expand...
Click to collapse
Get -->Odin3<-- Just extract Odin folder and keep the odin3.ini file in it.
I use v1.85 in this guide you can use also the latest version... it doesnt matter.
Click to expand...
Click to collapse
----- FLASHING WITH ODIN3 v1.85 -----
Click to expand...
Click to collapse
1. Just download the CWM version you want from the 2nd post. It must be a .tar or .tar.md5 file!!
2. Reboot your phone to download mode.
To get download mode shut down the device. After it shuts off completely simultaneously press the Down volume key + press the power button .
You should see a warning asking you to press volume up if you want to continue or volume down to cancel, press volume up. You are now in download mode!
3. Start Odin
4. Click on the PDA button and browse to the .tar or .tar.md5 file that you downloaded in step 1
5. PLEASE DO NOT PUT .PIT FILE AND DO NOT, I REPEAT, DO NOT TICK REPARTITION!!!
6. Connect the USB cable and wait for the ID:COM section to turn yellow
Should look like this screenshot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
7. Click start to flash
8. Do not disconnect the cable or turn off the device, it will reboot when it finishes.
Click to expand...
Click to collapse
========================================================================================================================
-- ROOT METHOD SGS4 I9506 + E330S --
Click to expand...
Click to collapse
The following root file was made for the E330S and works also on I9506.
The only difference to the original file is that i changed the Korean superSU.apk with the International free superSU.apk from great Chainfire´s thread: http://forum.xda-developers.com/showthread.php?t=1538053
Now you are able to read the text and dont need to learn Korean language
Click to expand...
Click to collapse
1. Download ROOT_E330S_I9506_v2.zip and Latest UPDATE-SuperSU-vX.xx.zip package fom Chainfire!!!!!
3. Transfer the file ROOT_E330S_I9506_v2.zip and UPDATE-SuperSU-vX.xx.zip to the extSDCARD(the SDCARD where you afterwards plugged in!!) or the SDCARD(from your device)
4. Turn off your Device
5. After device completely OFF - Enter Recovery
-->Entering Recovery:
- Hold Volume UP + Power Button
- When device turns ON, RELEASE POWER BUTTON when it says RECOVERY BOOTING (ignore the text "SECURE FAIL: Recovery" since you flashed CWM ....)
- Will Enter Recovery
6. Select install Zip
6.1 Select choose zip from external SDCARD(if you transferred it on SDCARD where you afterwards plugged in!!) or choose zip from SDCARD(from your device)
7. Select file ROOT_E330S_I9506_v2.zip
8. Move to YES - Install ROOT_E330S_I9506_v2.zip touch it or Push the Power button
9. Return to CWM main menu
10. Select install Zip
10.1 Select choose zip from external SDCARD(if you transferred it on SDCARD where you afterwards plugged in!!) or choose zip from SDCARD(from your device)
11. Select file UPDATE-SuperSU-vX.xx.zip
12. Move to YES - Install UPDATE-SuperSU-vX.xx.zip touch it or Push the Power button
13. When update procedure finished, REBOOT.
Now your device is rooted!
Click to expand...
Click to collapse
Cheers
If i forgot something or it is wrong just post here in thread Thanks!
​

Cwm - versions - download
On this Post you can dowload the CWM to flash it with ODIN to your device.
FOLDER: 1_CWM_FILE_I9506_E330S
1. Chenglu_cwm_recovery_6.0.3.7(0905)-fix-exSdcard.tar <-- build from Chenglu @Chenglu aka github: xiaolu
2. Philz_Touch _CWM_6.3.7_V5.15.0_unofficial.tar <-- a unofficial build by unknown from @Phil3759 - Philz Touch CWM -- github: philz_touch_cwm6
Click to expand...
Click to collapse
Many thanks to this persons!!! a big -> ^^
FOLLOWING CWM IS SPECIALLY TESTED AND MODIFIED FOR GT-I9506!! (NOT TESTED ON E330S!!)
FOLDER: 1.1_CWM_FILE_I9506
1. Philz_Touch__CWM_6.3.7_V5.15.0_unofficial_(fixed_preload).tar <-- a unofficial build modified for I9506 by xenix96 from @Phil3759 - Philz Touch CWM -- github: philz_touch_cwm6
2. CWM_6.0.4.6_Non-Touch_GT-I9506.tar <-- a unofficial CWM build from @dridri85 -- github: dridri / android_device_samsung_ks01lte
Click to expand...
Click to collapse
Happy debloating guys
​

another one ^^^^^^

^^ last one ................

Thanks! xenix96.
This Works great for my I9506.

Thanks xenix96!
If it wasn't for you I would still be with a castrated beast.
I just want to ask if this custom version of Phil's Touch has less features compared to the common one we all know?
Otherwise I will have to install the CWM, but I don't like it.
Sent from my (soon rooted) Samsung Galaxy S4 LTE+ (GT-I9506)

Cr4z33 said:
Thanks xenix96!
If it wasn't for you I would still be with a castrated beast.
I just want to ask if this custom version of Phil's Touch has less features compared to the common one we all know?
Otherwise I will have to install the CWM, but I don't like it.
Sent from my (soon rooted) Samsung Galaxy S4 LTE+ (GT-I9506)
Click to expand...
Click to collapse
I use this unoffcial release of philz cwm cause it has much more features and mostly all features working.
aroma file manager, terminal, script thing i didnt tested and really never used it.
the chenglu cwm got only the basic features of cwm like we all know from source. for all who dont want more its also great
ok kids and wife waiting for to make breakfeast
Cheers
Sent from my GT-I9506 using XDA Premium 4 mobile app

xenix96 said:
I use this unoffcial release of philz cwm cause it has much more features and mostly all features working.
aroma file manager, terminal, script thing i didnt tested and really never used it.
the chenglu cwm got only the basic features of cwm like we all know from source. for all who dont want more its also great
ok kids and wife waiting for to make breakfeast
Cheers
Sent from my GT-I9506 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yeah I choosed the same.
I only suggest you to add at step #6 of the flashing tut the link to the Samsung USB drivers as it's a common thing people might forget to install and therefore the device wouldn't be detected when connecting by USB.
Now thanks to you I can finally back everything up with Titanium and flash another ROM (the NEE one)!
Remember to setup a Beer button so that we can offer you one.

Cr4z33 said:
Yeah I choosed the same.
I only suggest you to add at step #6 of the flashing tut the link to the Samsung USB drivers as it's a common thing people might forget to install and therefore the device wouldn't be detected when connecting by USB.
Now thanks to you I can finally back everything up with Titanium and flash another ROM (the NEE one)!
Remember to setup a Beer button so that we can offer you one.
Click to expand...
Click to collapse
well if you take a look to my signature and push to the thread with firmwares....then go to rooting section theire i wrote the samsung drivers ....
on this currently thread i thought everyone knows that we need driver to communicate with device....
but your 100% right i have to explain that for those who dont know that.
so i will add this evening
i got a beer button under my avatar but for that you guys dont need do anything.
spare your beers for real developer !!!
i hope we get some devs for this device
I just gathered informations - tested - and share it with you guys. nothing special for me.
cheers
Sent from my GT-I9506 using XDA Premium 4 mobile app

I have chosen Philz Touch CWM and im not able to mount my external SD card. Did you guys have the same problem?
I alwys get the message: Can't mount /external_sd/
But internal SD card is working.
Edit: Ok... was able to get access to external SD card with Chenglu's CWM

boart
No i had no problems with the external sd card.

Rechargelegend said:
boart
No i had no problems with the external sd card.
Click to expand...
Click to collapse
Same.

boart said:
I have chosen Philz Touch CWM and im not able to mount my external SD card. Did you guys have the same problem?
I alwys get the message: Can't mount /external_sd/
But internal SD card is working.
Edit: Ok... was able to get access to external SD card with Chenglu's CWM
Click to expand...
Click to collapse
with philz cwm there is also no problem with extsdcard. i can make backups,restore and install from extsdcard
Sent from my GT-I9506 using XDA Premium 4 mobile app

worked a treat
cheers

this morning I got really happy reading this thread :good::good::good::good: - luckily a way to get my I9506 (probably one of the very first delivered ones in germany) rooted
many thanks for generating a way to root!!!!!!!!!!!!!
BTW: Are there already some other modem versions available or does anyone have some experiences with the dfiferent modem versions?

boart said:
I have chosen Philz Touch CWM and im not able to mount my external SD card. Did you guys have the same problem?
I alwys get the message: Can't mount /external_sd/
But internal SD card is working.
Edit: Ok... was able to get access to external SD card with Chenglu's CWM
Click to expand...
Click to collapse
Same problem here. No ext sd card access here with Phils.
Do you remove the sd before going into CWM? Format is exFAT.
Thanks!
Gesendet von meinem GT-I9506 mit Tapatalk 2

puschel_1 said:
Same problem here. No ext sd card access here with Phils.
Do you remove the sd before going into CWM? Format is exFAT.
Thanks!
Gesendet von meinem GT-I9506 mit Tapatalk 2
Click to expand...
Click to collapse
I just used Chenglus CWM. No problem with getting access to the SD Card with it.

Well finally the root is here cheers the beers are on their way..........
Anywho have not done the root yet. Before I do is there a way of backing up what I have no so if something happens(touch wood) I can revert back to what I have now?
Also in a dummies guide sentence what is the knox warranty googled it and still not sure
Cheers

funkyirishman said:
Well finally the root is here cheers the beers are on their way..........
Anywho have not done the root yet. Before I do is there a way of backing up what I have no so if something happens(touch wood) I can revert back to what I have now?
Also in a dummies guide sentence what is the knox warranty googled it and still not sure
Cheers
Click to expand...
Click to collapse
I actually had my contacts saved on the Google account and you can do the same.
Save the SMS with SMS Backup & Restore.
Everything else can be moved to your computer and back.
I then rooted the phone, installed Titanium Backup and went on with a complete apps, data and settings backup.
Even after flashing the NEE firmware everything (but root and CWM) was there without the need of a restore.
Sent from my Samsung Galaxy S4 LTE+ (GT-I9506)

Cheers
Went to load the tar file using odin but when I connected the phone it installed the software and then opened Odin and loaded file and then connected phone but it did not go yellow see below it went a light blue?
Anyone know what maybe causing this?

[RECOVERY][UNOFFICIAL][GT-I9060][GRAND NEO] CWM Version 6.0.5.1

Note: THIS WILL VOID YOUR WARRANTY!!! No one but yourself is responsible for what you do to your device. USE AT YOUR OWN RISK!!!
People to Thank:
koush - for his awesome recovery.:good:
CyanogenMod - for their repos.:victory:
Samsung - for the device
Issues:
None found yet:angel:​
How to install with Odin:
1. Disconnect your phone from your computer
2. Start Odin3-vX.X.exe
3. Click the PDA button, and select recovery.tar
4. Put your phone in download mode (turn off phone, then hold VolDown+Home+Power to boot (if it asks you to press VolUp button to continue, press the button, or run adb reboot download command)
5. Connect the phone to your computer
6. Make sure Repartition is NOT checked
7. Click the Start button
9. Wait for Android to boot
10. Done!!!
If you already have some custom recovery:
Put the zip on your phone or sdcard and flash it as usual.
Enjoy!!:good:

The perfectly working recovery..! At last a stable CWM is available..!

Soul_reaper121 said:
The perfectly working recovery..! At last a stable CWM is available..!
Click to expand...
Click to collapse
thanks buddy..just take it for a ride..and test everything lol..report if find anything broken

Does it support external memory card acess and backup
Sent from my SM-G7102

manan001 said:
Does it support external memory card acess and backup
Sent from my SM-G7102
Click to expand...
Click to collapse
Yes it does. I just made a backup on my external SD card. You might find it named as storage/sdcard1. Good Luck.

manan001 said:
Does it support external memory card acess and backup
Sent from my SM-G7102
Click to expand...
Click to collapse
Yeah it does bro..everything works..no bug what so ever

Hi. Will this work on GT-I9060I? Thanks.

Is working too on Grand Neo Plus? (GT-I9060I)?

Hello i want to ask do i need to unlock bootloader first? Because i dont find any post how to unlock it

HELP
Well guys, i went from a forum to this site and i dowloaded odin, though i see no PDA button (guessed it is the ap) and when i connected my device to my pc in the STOCK samsung recovery mode windows didnt recognized it, odin didnt too, so what i am supposed to do?

Can we use it without Pc? if yes! Then how?

Samsung Galaxy grand néo plus

sggff

Tooop

hi

مااقدر ا

شكرن

Good

HELP!! In ODIN, I am unable to select the AP file. Whenever I click on the AP button to select the recovery image that I have downloaded, it does not recognise the recovery file. The file selection window is blank. Please help....

No OS, please help.

For the past 6 hours I've been trying to unbrick my Samsung Galaxy S6 Edge (G925-W8). I accidentally cleared all the files/ caches with TWRP, now I do not have any OS on it.
Things I've done:
Used Odin to flash a md5 file or a rom I keep getting an error
I'm so lost, I just got the phone yesterday as well too

Do you have twrp? If so, you can sideload a rom. I think you could also mount your sdcard while you're in twrp, and browse it in Windows.

badchip said:
Do you have twrp? If so, you can sideload a rom. I think you could also mount your sdcard while you're in twrp, and browse it in Windows.
Click to expand...
Click to collapse
Yes i still have access to TWRP, but the rest of what you said i have no idea on how to move forward lol

jamescao said:
Yes i still have access to TWRP, but the rest of what you said i have no idea on how to move forward lol
Click to expand...
Click to collapse
Download official firmware from sammobile if u want official, or a custom rom from here on XDA.
Link to YOUR phones official firmware: http://www.sammobile.com/firmwares/database/SM-G925W8/
(Please note that firmware downloads from Sammobile are very limited on speed if you are not a premium member. This download can take a few hours to complete)
If you have an official firmware downloaded:
1. extract the zip file to get your .tar.md5 file
2. turn your phone completely off, then back on in "download mode" you can do this by holding the volume down + home + power keys, then click volume up key to go into download/odin mode.
3. Connect your phone to your computer AFTER phone is in download mode and odin is opened and ready, you will then see it connected.
4. In odin, click on the "PDA" or "AP" (in some versions) button, and find your .tar.md5 file and add it.
5. When this is done make sure only F. Reset Time and Auto Reboot is checked, and most importantly, NOT Re-partition!!
6. Click start and wait for phone to automaticly get the firmware and reboot, when the ID:COM is green, and says completed, you may unplug your phone and set it up.
If you have downloaded a custom ROM from XDA:
1. Connect your phone to the computer.
2. Place the downloaded flashable ROM somewhere on your SD card.
3. Remove phone from PC
4. Boot phone into TWRP (custom recovery)
5. Do a data/factory reset
6. Choose install, find and select your file & click add.
7. Drag pointer to flash selected file.
8. For good spirits, do another wipe of ONLY "dalvic cache & cache" before you reboot phone to start it up.
Hope some of this information can be of any help to you just ask if anything is unclear / bad explained BEFORE you actually do something your unsure of!
Regards
- Renolz

Looks like you tried something without searching first

How did this go? All resolved?
Sent from my SM-G920F using Tapatalk

Everything: Samsung Galaxy Note 1 [N7000] Stock ROM, Repartition, Root

:laugh::laugh:Samsung Stock ROM with no lags
Install on your own responsibility. Author of this post is not responsible for any bricked device. Author personally applied steps mentioned here on his N7000 (India) device.
Click to expand...
Click to collapse
Author tested on his Samsung Galaxy N7000 device.
Device tested for full 48 hours with no bugs.
Repartition of device is done on Samsung Galaxy Note 1 (N7000) 16GB model.
If you face any issues, those are pure stock ROM bugs.
Check Software update & register your device before you root your device with given steps in this post.
Rooting is optional, but I found that Stock ROM with it's original Kernel lags too much.
Kernel mentioned here is Optimised for Performance & Battery life.
It is a rare combination of Performance & Battery Optimisation.
I had installed many custom ROM, but the only issue that I was facing was incompatibility of those ROMs with my Samsung Camera & other phone functions. I noticed that many users wanted to move back to stock ROM but they had either faced installation issues or slower speeds for ROM package & inadequate sources to find exact ROM which is available for their device with their respective country. So, I decided to help those unlucky ones with this post, helping to get custom ROM installed on their devices & eliminate the STOCK ROM lagging issue with flashing of custom Kernel.
Click to expand...
Click to collapse
Prerequisite: ​
Latest Odin
Stock ROM respective of user's country.
PIT Files {I have only included 16GB model PIT files.}
SpeedMod Kernel zip.
Download & install Samsung Galaxy Note Drivers.
I have attached or/else provided links for all necessary files.
All STOCK ROM links are connected to Google Drive.
Okay, So we should start now!
THIS IS STRICTLY FOR SAMSUNG GALAXY NOTE 1 [N7000] worldwide.
First thing first. Download & Install Samsung Galaxy Note 1 drivers here.
Download Latest Odin here.
Download STOCK ROM respective to your country here. [All are Google Drive links, hope they will make your Stock download faster.]
Download PIT ZIP file from attachments given below.
Download Kernel ZIP from attachments given below.
Now start the flashing STOCK ROM procedure:
Install drivers that you just downloaded from above link & restart you rmachine upon successful installation of drivers.
Upon restart after successful installation of drivers run Odin as an Administrator.
Restart your phone in download mode [To start device in Download Mode, Switch off your phone, then Press following key combination simultaneously for 10 seconds. Press, "Volume Down + Home Button + Power button"] until then do not attach your phone to PC.
Load PIT file first & ignore any developer warning that Odin throws on you.
In the section of AP, load your downloaded Stock ROM which should be respective to your country.
Let Odin takes it's time & upon Leave CS warning in 'Log' section of Odin, attach your phone to computer.
Press 'Volume Up' button you should now see Downloading box on your Mobile screen.
Click on 'Start' in Odin to start flashing of ROM.
After Successful completion of Flashing you will see Green Box on top of the Odin software showing 'PASS' result.
Now let your device start normally, you should complete all setup procedure i.e. Inserting your Samsung Acct. credentials, Google Credentials etc.
Once you see your device is been running properly, you have successfully flashed Stock ROM on your device without any issues.
To root your device & install custom kernel to make your device run without any lags follow the instructions given below:
Power off your device.
Open 'Download Mode'
Run Odin as an Administrator.
Load Kernel.zip in AP section of Odin [provided in the attachments].
No need to load PIT file again!
Now attach your phone & press Volume up button to enter in download mode.
Odin should detect your Phone.
Then press Start & wait until Kernel flashes properly.
Upon successful installation device will go blank, you need to be quick & should open your device in recovery mode [To start device in recovery, Press 'Volume Up + Home Button + Power button' for 10 sec.] within that very time.
Do factory reset & wipe all cache partition in Recovery menu.
Now reboot your phone.
Your device has successfully rooted & should Run smooth with new kernel.
Kernel Features:
Fast, Optimised for Galaxy Note
Battery Optimisation has enhanced getting less juice out of battery against device's performance.
Better RAM management.
Better Thread handling.
Hope you will perform & follow instructions properly & enhance your Galaxy Note performance. Any queries, Suggestions, feedback are appreciated.

regarding repartition
hi will the pit files repartition my n7000, if so what would the partition size look like.
more app storage?
souravbhor said:
:laugh::laugh:Samsung Stock ROM with no lags ​
Author tested on his Samsung Galaxy N7000 device.
Device tested for full 48 hours with no bugs.
Repartition of device is done on Samsung Galaxy Note 1 (N7000) 16GB model.
If you face any issues, those are pure stock ROM bugs.
Check Software update & register your device before you root your device with given steps in this post.
Rooting is optional, but I found that Stock ROM with it's original Kernel lags too much.
Kernel mentioned here is Optimised for Performance & Battery life.
It is a rare combination of Performance & Battery Optimisation.
​
Prerequisite: ​
Latest Odin
Stock ROM respective of user's country.
PIT Files {I have only included 16GB model PIT files.}
SpeedMod Kernel zip.
Download & install Samsung Galaxy Note Drivers.
I have attached or/else provided links for all necessary files.
All STOCK ROM links are connected to Google Drive.
Okay, So we should start now!
THIS IS STRICTLY FOR SAMSUNG GALAXY NOTE 1 [N7000] worldwide.
First thing first. Download & Install Samsung Galaxy Note 1 drivers here.
Download Latest Odin here.
Download STOCK ROM respective to your country here. [All are Google Drive links, hope they will make your Stock download faster.]
Download PIT ZIP file from attachments given below.
Download Kernel ZIP from attachments given below.
Now start the flashing STOCK ROM procedure:
Install drivers that you just downloaded from above link & restart you rmachine upon successful installation of drivers.
Upon restart after successful installation of drivers run Odin as an Administrator.
Restart your phone in download mode [To start device in Download Mode, Switch off your phone, then Press following key combination simultaneously for 10 seconds. Press, "Volume Down + Home Button + Power button"] until then do not attach your phone to PC.
Load PIT file first & ignore any developer warning that Odin throws on you.
In the section of AP, load your downloaded Stock ROM which should be respective to your country.
Let Odin takes it's time & upon Leave CS warning in 'Log' section of Odin, attach your phone to computer.
Press 'Volume Up' button you should now see Downloading box on your Mobile screen.
Click on 'Start' in Odin to start flashing of ROM.
After Successful completion of Flashing you will see Green Box on top of the Odin software showing 'PASS' result.
Now let your device start normally, you should complete all setup procedure i.e. Inserting your Samsung Acct. credentials, Google Credentials etc.
Once you see your device is been running properly, you have successfully flashed Stock ROM on your device without any issues.
To root your device & install custom kernel to make your device run without any lags follow the instructions given below:
Power off your device.
Open 'Download Mode'
Run Odin as an Administrator.
Load Kernel.zip in AP section of Odin [provided in the attachments].
No need to load PIT file again!
Now attach your phone & press Volume up button to enter in download mode.
Odin should detect your Phone.
Then press Start & wait until Kernel flashes properly.
Upon successful installation device will go blank, you need to be quick & should open your device in recovery mode [To start device in recovery, Press 'Volume Up + Home Button + Power button' for 10 sec.] within that very time.
Do factory reset & wipe all cache partition in Recovery menu.
Now reboot your phone.
Your device has successfully rooted & should Run smooth with new kernel.
Kernel Features:
Fast, Optimised for Galaxy Note
Battery Optimisation has enhanced getting less juice out of battery against device's performance.
Better RAM management.
Better Thread handling.
Hope you will perform & follow instructions properly & enhance your Galaxy Note performance. Any queries, Suggestions, feedback are appreciated.
Click to expand...
Click to collapse

repartition of gtn7000
hi i would like to try this method, my gtn7000 16Gb variant is currently running CM10.1.3, CWM 6.0 as recovery.
The pit file attached in your post, does it increase the system partition, I am in need of a higher partition for my note as i get insufficient storage to install apps.
Also in your method is it necessary to flash the updated kernel, as I intend to expand the partition and later install CM10.1.3 or higher versions.
Will the CWM recovery be still there or do i need to flash it again.?
should i tick re-partition option , F-reset time, auto reboot in odin ?
regards
Nithin S.

Yes Exactly!
nithin1664 said:
hi will the pit files repartition my n7000, if so what would the partition size look like.
more app storage?
Click to expand...
Click to collapse
Hi Nitin,
PIT stands for Partition Information Table, it simply tells your device in what amount the internal storage is divided into Internal/ Phone memory & SDCARD0.
Difference between both the memories are, first used for app installation & later for data associated with those applications installed. So with officially N7000 comes with 2 GB Internal/ Phone memory & 12 GB of SDCARD0.
SO if you choose 8 GB PIT file for official stock ROM then you are ultimately getting 8 GB for app storage & rest 5 GB for related data storage.
You can choose between 4,6 & 8 GB of PIT file as per your needs & for ROMs other than STOCK you can extend this memory variant to (4,6,8,10 &) 12 GB Internal & 1.3 GB SDCARD0.
Hope you find this helpful & sorry for posting so late.

nithin1664 said:
hi will the pit files repartition my n7000, if so what would the partition size look like.
more app storage?
Click to expand...
Click to collapse
nithin1664 said:
hi i would like to try this method, my gtn7000 16Gb variant is currently running CM10.1.3, CWM 6.0 as recovery.
The pit file attached in your post, does it increase the system partition, I am in need of a higher partition for my note as i get insufficient storage to install apps.
Also in your method is it necessary to flash the updated kernel, as I intend to expand the partition and later install CM10.1.3 or higher versions.
Will the CWM recovery be still there or do i need to flash it again.?
should i tick re-partition option , F-reset time, auto reboot in odin ?
regards
Nithin S.
Click to expand...
Click to collapse
Hello Nitin,
Yes my method exactly intended for the very specific reason you mentioned here. "It will EXTEND your partition size " & let you install more apps!
There is no need to install custom kernel or flash any other ROM. I have tested it on all CM version ( CM 10+). Also there is no need to select F-reset time, auto reboot in odin. Go to odin Select PIT, it will pop-up some message just say Ok & proceed. Select desired PIT file from downloaded & extracted ZIP. Odin is smart enough to understand your operation & select all necessary settings automatically.
Simply, restart your phone in Download Mode, connect it to your PC & only flash the PIT file.
Hope this will help you! Any need please leave your question here.

Do I lose all data from internal sd or external sd card?

BACKUP Always!
ImN00Bpa said:
Do I lose all data from internal sd or external sd card?
Click to expand...
Click to collapse
Hello,
I first of like to advise you to backup all the data regardless How secure the procedure is. Because no one knows when some bug will come up! You better backup all your Internal data & proceed.

Hi there..sorry for late question..i have n7000 already update to 4.1.2 DXLSE XME..so do i need to flash PIT.file only or do i need to re flash stock 4.1.2 with pit.file??
And i try to root it with Philz but didnt work even supersu granted..device still official..can i just root it with this speedmod kernel?

If you need to!
halagore said:
Hi there..sorry for late question..i have n7000 already update to 4.1.2 DXLSE XME..so do i need to flash PIT.file only or do i need to re flash stock 4.1.2 with pit.file??
And i try to root it with Philz but didnt work even supersu granted..device still official..can i just root it with this speedmod kernel?
Click to expand...
Click to collapse
Flashing PIT File will change your partition table & enables device to allocate future data in similar way. I suggest re-flashing ROM would be better. Because with new partition information your device's software & other system apps will reside on proper partition. Hope you will find this information productive.
Ask freely if you have any further doubts.