Database Info

Huawei ideos (u8150) drivers??

I've got a Huawei u8150 which I just rooted using z4root. Now I'm trying to put it into recovery mode using ultrajackrecovery but when I put it off then put it back on while holding the volume down and end key and connect it to my PC, it says Android 1.0 driver not found. PS. USB debugging is turned on. I need help in finding the right drivers and I'm using a windows 7 64bit pc. Thanks!
Sent from my Ideos using XDA App

Also when I open ultra Jack recovery, it just says "waiting for device".
Sent from my Ideos using XDA App

jstifler said:
I've got a Huawei u8150 which I just rooted using z4root. Now I'm trying to put it into recovery mode using ultrajackrecovery but when I put it off then put it back on while holding the volume down and end key and connect it to my PC, it says Android 1.0 driver not found. PS. USB debugging is turned on. I need help in finding the right drivers and I'm using a windows 7 64bit pc. Thanks!
Sent from my Ideos using XDA App
Click to expand...
Click to collapse
first of all install adb drivers...they are located at the cdrom partition of the device...when you connect it it should appear...then install those drivers...and boot into bootloader mode(redkey+vol down+power)....then manually install the android bootloader from the device manager...or intall pdanet on the computer and it will automatically install everything

i've done that and it was able to install some drivers when the phone was on. then i put it back off and tried restarting it using vol down and the end key but when it comes on, it still says android 1.0 driver not installed. and ultra jack recovery is also not recognizing it. i think it will after the android 1.0 driver has been installed but i cant find it.

manually install the driver!
right click computer,propeties,device manager..
look for android 1.0
double click it..
reinstall driver..
manually select driver..
look for android devices.
select android bootloader interface and install it.
it WILL work..
(i had the same problem)

THANKS MAN! IT WORKED!! now that im done with this, which rom would you suggest i install?? there's a lot all over and im confused about which one to go with.

maury1234 said:
manually install the driver!
right click computer,propeties,device manager..
look for android 1.0
double click it..
reinstall driver..
manually select driver..
look for android devices.
select android bootloader interface and install it.
it WILL work..
(i had the same problem)
Click to expand...
Click to collapse
thumbs up, thanks man, it worked for me tooo

cknaveed said:
thumbs up, thanks man, it worked for me tooo
Click to expand...
Click to collapse
thanks man, i have the same problem and ive searched the site and it lead me to your post... thanks! problem solved! =)

this doesnt work.
the computer cant find the drivers no matter what.
can you help me out and find me the drivers for it?
thanks.

when I plug in my U8150 I don't get the cd partition anymore I had it before but I disappeared suddenly... How can I get it back? I want to install the ADB drivers.
Thank you

TimG83 said:
when I plug in my U8150 I don't get the cd partition anymore I had it before but I disappeared suddenly... How can I get it back? I want to install the ADB drivers.
Thank you
Click to expand...
Click to collapse
This will solve your problem:
http://forum.xda-developers.com/showthread.php?t=995066

Trekker56 said:
This will solve your problem:
http://forum.xda-developers.com/showthread.php?t=995066
Click to expand...
Click to collapse
Great!!! Solved it indeed thank you!

finally solved...
great!!!!

Phone is not getting detected in windows 8

hi my i9003 is not getting detected in download mode on odin 1.82,1.83 and 3.04. I m on windows 8.. It's having CM installed please help.. what can i do

emptyragnarok said:
hi my i9003 is not getting detected in download mode on odin 1.82,1.83 and 3.04. I m on windows 8.. It's having CM installed please help.. what can i do
Click to expand...
Click to collapse
U will have to install i9003 device drivers. Try to install one u have but i don't think it will work as it is specifically not for windows 8. U will have to wait for windows 8 drivers(which will probably not created). However try with one which u r having, if it worths. Or else find windows 7 or xp computer.:thumbup:
Or at last enjoy CM.
Sent from my GT-I9003 using xda premium

download and install kies for drivers

Dont use latest driver and no need to install Kies. Heres Link to old Drivers which works on Win 8
http://www.mediafire.com/?qp9gw2i9lwbr3qb

I used older drivers.. those are working. latest kies drivers don't work. thanks for help.

emptyragnarok said:
I used older drivers.. those are working. latest kies drivers don't work. thanks for help.
Click to expand...
Click to collapse
Can u post the link to the older drivers which are working .. the one I installed does not detect the memory card ...

[Q] Stop Being Arrogant and help me a bit please?

Hey guys.. New around the xda forums but not to the Android world.
Coming to the point, Here are the problems i'm facing with my Micromax A110 (Factory version: Andoid Jellybean - 4.1.1)
Everything that i tried so far:
(I have the ADB Interface and the micromax factory drivers in this step)
1. I installed on the Micromax Drivers provided itself by the phone.. the 64bit one as i have Windows Ultimate x64. Now the problem starts when i use the Su Recovery Tool by Bin4ry (or whatever his name is). Everything goes normal..i went by the instructions i.e Usb debug on ---> Media Device. Then on the tool i pressed 1 i.e The normal option and then carry the on screen instructions. It does come to the restore my data part and reboots. Now.. during the reboot, I get a windows update prompt which installs the MT65xx Preloader Drivers. However, the phone does not restart and so as well the drivers as it says device unplugged and then.. poof! Nothing happens.. I have to Remove the battery, restart manually and the program says.. Unable to copy files..Are you root?.. -_- Dafuq?
2. Now i used the famous SP FLASH tool.. but no luck again.. I tried to flash CWM Recovery through it.. but the application has its own problems.. either error 3013 (SOC VERIFICATION FAIL) or again.. the MT65xx driver not found.. AGAIN. -_-" I once also got the 1013 error
I did try disabling the driver enforcement signing but it was of no use (Obviously)
Your help will be appreciated (Thanks option ofcourse). Looking forward to your Reply
-R4vnit
P.S - I dealt with the Mt65xx driver problem, but still.. the Su Bin4ry file cannot flash anything onto the phone (error protocol (status))

ravnit said:
Hey guys.. New around the xda forums but not to the Android world.
Coming to the point, Here are the problems i'm facing with my Micromax A110 (Factory version: Andoid Jellybean - 4.1.1)
Everything that i tried so far:
(I have the ADB Interface and the micromax factory drivers in this step)
1. I installed on the Micromax Drivers provided itself by the phone.. the 64bit one as i have Windows Ultimate x64. Now the problem starts when i use the Su Recovery Tool by Bin4ry (or whatever his name is). Everything goes normal..i went by the instructions i.e Usb debug on ---> Media Device. Then on the tool i pressed 1 i.e The normal option and then carry the on screen instructions. It does come to the restore my data part and reboots. Now.. during the reboot, I get a windows update prompt which installs the MT65xx Preloader Drivers. However, the phone does not restart and so as well the drivers as it says device unplugged and then.. poof! Nothing happens.. I have to Remove the battery, restart manually and the program says.. Unable to copy files..Are you root?.. -_- Dafuq?
2. Now i used the famous SP FLASH tool.. but no luck again.. I tried to flash CWM Recovery through it.. but the application has its own problems.. either error 3013 (SOC VERIFICATION FAIL) or again.. the MT65xx driver not found.. AGAIN. -_-" I once also got the 1013 error
I did try disabling the driver enforcement signing but it was of no use (Obviously)
Your help will be appreciated (Thanks option ofcourse). Looking forward to your Reply
-R4vnit
P.S - I dealt with the Mt65xx driver problem, but still.. the Su Bin4ry file cannot flash anything onto the phone (error protocol (status))
Click to expand...
Click to collapse
Hey I too had the problem previously I have install com drivers problem solved go here www.moulnisky.com. select Micromax /mmxa110/ you can find it there please hit thanks
If it doesn't work there may be problem with ROM which ROM are you trying flashing another ROM
http://forum.xda-developers.com/showthread.php?t=2263511
Try this ROM it is best at least hit thanks it that thread please
Sent from my Micromax A110 using xda premium

nikhilmendu said:
Hey I too had the problem previously I have install com drivers problem solved go here www.moulnisky.com. select Micromax /mmxa110/ you can find it there please hit thanks
If it doesn't work there may be problem with ROM which ROM are you trying flashing another ROM
http://forum.xda-developers.com/showthread.php?t=2263511
Try this ROM it is best at least hit thanks it that thread please
Sent from my Micromax A110 using xda premium
Click to expand...
Click to collapse
I dont mind giving a Thanks but none of the above drivers work and they have a yellow exclamation on them in device manager.. :'(

Basically all the drivers u need are in or phone. Delete all pre loader and com driver using driver management or reinstall using setup.
And I think u know this steps to flash ROM using sp tool.
Alternative
Use mobile uncle to flash recovery.
Sent from my Micromax A110 using xda premium

salil is right..
uninstall previous drivers use Revo unintaller as it removes the traces as well..
Then flash CWM through SPFlash tool!
Well if you aren't rooted you can't use Mobile Uncle Tool!

.salil. said:
Basically all the drivers u need are in or phone. Delete all pre loader and com driver using driver management or reinstall using setup.
And I think u know this steps to flash ROM using sp tool.
Alternative
Use mobile uncle to flash recovery.
Sent from my Micromax A110 using xda premium
Click to expand...
Click to collapse
Thanks for your advice mate.. although Skyrazor is right as root is required for Mobile uncle tools..
Im going to reinstall all drivers and let you know what the outcome is.
Thanks for your time

not responding to sp flash tool

my a110 is not responding to sp flash tool
even i have installled the drivers and have appropriate stock rom file .
when this error occured i tried to reset my cell bt problem still resists
pleaseeeee help !!!!!!!!!!!!!!!!!

abhishek120 said:
my a110 is not responding to sp flash tool
even i have installled the drivers and have appropriate stock rom file .
when this error occured i tried to reset my cell bt problem still resists
pleaseeeee help !!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
Try META MODE......!
flash mobile by removing battery
1.remove battery and hold volume + button
2.then connect to pc then flash it through sp tool

abhishek120 said:
my a110 is not responding to sp flash tool
even i have installled the drivers and have appropriate stock rom file .
when this error occured i tried to reset my cell bt problem still resists
pleaseeeee help !!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
Are u using Windows 8.. Cuz I had prblms flashing via sp tools in Windows 8.. windows 7 did it fr me..
Sent from my Micromax A110 (Canvas 2) using xda premium

demongokul said:
Are u using Windows 8.. Cuz I had prblms flashing via sp tools in Windows 8.. windows 7 did it fr me..
Sent from my Micromax A110 (Canvas 2) using xda premium
Click to expand...
Click to collapse
No i m using Windows 7

bro this happens sometime
i prefer u to use windows XP because sometimes due to win 7 automatic updates drivers issues takes place
and nothing to worry. u r phone is absolutely fine ,,, prob is with system
just change the system and try
if problem still persists try with latest SP Flash tools and old one ......(once this solved my prob too)
make sure u have installed "Mobistel Cynus T1 or micromax Drivers",, "MTK Drivers" ,,"VCOM Driver"
if u hav trouble installing drivers ,do this
when windows xp shows new hardware found click on it and go for manually updating drivers and set the path to the folder downloaded drivers are present in .it will automatically take care of the rest
and check this link it has everything
http://forum.xda-developers.com/showthread.php?t=2167244
and happy flasing

revanth22 said:
bro this happens sometime
i prefer u to use windows XP because sometimes due to win 7 automatic updates drivers issues takes place
and nothing to worry. u r phone is absolutely fine ,,, prob is with system
just change the system and try
if problem still persists try with latest SP Flash tools and old one ......(once this solved my prob too)
make sure u have installed "Mobistel Cynus T1 or micromax Drivers",, "MTK Drivers" ,,"VCOM Driver"
if u hav trouble installing drivers ,do this
when windows xp shows new hardware found click on it and go for manually updating drivers and set the path to the folder downloaded drivers are present in .it will automatically take care of the rest
and check this link it has everything
http://forum.xda-developers.com/showthread.php?t=2167244
and happy flasing
Click to expand...
Click to collapse
actually when i connected my phone to pc i noticed it is installing mt65xx preloder instead of mtk
now what to do???

abhishek120 said:
actually when i connected my phone to pc i noticed it is installing mt65xx preloder instead of mtk
now what to do???
Click to expand...
Click to collapse
dont worry its a simple problem
check this post it will help u
http://forum.xda-developers.com/showthread.php?t=2180436

Buddy no problem with Windows 8.
It works fine i am using it. Just follow this procedure to install proper drivers.
Link: http://forum.xda-developers.com/showthread.php?t=2370906

Solution
abhishek120 said:
actually when i connected my phone to pc i noticed it is installing mt65xx preloder instead of mtk
now what to do???
Click to expand...
Click to collapse
Bro, follow all the steps of using SP Flash tool which I hope u are following. Now the same error was faced by me, U can just press the volume up key and connect the USB to your PC. Please note U have to hold the volume up key while connecting the USB. and leave immediately ( within 5 secs ) after the USB is inserted.
This has worked for me and 3 other friend's of mine. Best of luck.
Hit thanks If it helps u.

Moto G not detected win 8.1

Hi,
I updated my moto g(xt1033) to kitkat as soon as i got the phone .
most of the time i use airdroid to transfer files . But recently when i tried to connect via MTP mode the device was not detected . It was neither detected in camera mode .
In the device manager its showing an error .
The drivers for this device are not installed. (Code 28)
There are no compatible drivers for this device.
Please help .

+1
same problem here. though i got adb to work with win 8.1

reversegear said:
+1
same problem here. though i got adb to work with win 8.1
Click to expand...
Click to collapse
Install Motorola drivers
https://motorola-global-en-uk.custhelp.com/app/answers/prod_detail/a_id/96456/p/30,6720,9050

robin0800 said:
Install Motorola drivers
https://motorola-global-en-uk.custhelp.com/app/answers/prod_detail/a_id/96456/p/30,6720,9050
Click to expand...
Click to collapse
tried that still not working

reversegear said:
tried that still not working
Click to expand...
Click to collapse
+1 tried not working .

For me works like a charm, check your drivers installation.

abcduploader said:
+1 tried not working .
Click to expand...
Click to collapse
You need to disable some driver enforcement business in Windows 8.1 before you can install the drivers.
http://www.howtogeek.com/167723/how...8.1-so-that-you-can-install-unsigned-drivers/
Refer to the above link, after restarting, install Moto Drivers again. (http://download.clockworkmod.com/drivers/MotoHelper_2.1.32_Driver_5.4.0.exe)
Let me know.

Windows 8.1 installs Microsoft USB drivers which won't allow you to use the phone even if you install drivers. You must search for your original USB drivers and install them instead of the windows 8.1 ones.
Sent from my XT1032 using xda app-developers app

You might need some RNDIS drivers.

Try a factory reset. Worked for me.
My Moto G (XT1033) was working with some bugs to connect on Win 8.1 before the kit kat. After the update has stopped completely. I did a factory reset and everything is fine now.

I had the same issue, and this is how I fixed it.
The easiest way was to enable developers mode on the moto g (go to about phone, and tap on build number 7 times)
Now, developer options should appear in the settings menu. Enable USB debugging in the developer options, that's it!
This should help windows 8.1 recognise your phone.
As I side note, I have not installed any drivers.
Good luck!
Sent from my XT1033 using Tapatalk

Install windows media player your problem is solved
abcduploader said:
Hi,
I updated my moto g(xt1033) to kitkat as soon as i got the phone .
most of the time i use airdroid to transfer files . But recently when i tried to connect via MTP mode the device was not detected . It was neither detected in camera mode .
In the device manager its showing an error .
The drivers for this device are not installed. (Code 28)
There are no compatible drivers for this device.
Please help .
Click to expand...
Click to collapse
Install windows media pack. I guess You are using windows 8.1 pro n. Installing windows media pack will solve your problem enjoy

cypherhonk said:
Install windows media pack. I guess You are using windows 8.1 pro n. Installing windows media pack will solve your problem enjoy
Click to expand...
Click to collapse
very very thank you man... its worked ....