Nvidia shield build quality - Shield Q&A

How's the build quality, i ve seen reports of falling screws, is this rare and was at launch or the problems persist?

0mega007 said:
How's the build quality, i ve seen reports of falling screws, is this rare and was at launch or the problems persist?
Click to expand...
Click to collapse
Mine is built like a champ, I have had no problems and mine gets a lot of use. I purchased mine second hand also.

0mega007 said:
How's the build quality, i ve seen reports of falling screws, is this rare and was at launch or the problems persist?
Click to expand...
Click to collapse
Yep, it's great quality. Very good. It gives you the sensation of "this thing will last forever".

I haven't had so much luck. I still have my original but already went through 2 refurbish and sent them back. All of them have the left grinding stick which wears the stick and causes it to get stuck in certain positions. Im screwed with having to keep my original now. I returned the last refurbished shield to nvidia but they now say "they can't find it" so they will not provide me with another one. Im ticked but I do love my shield.

had mine from september 2013. no problems at all. superb built quality

Related

build quality issues still present

I purchased my first tf700 from Newegg 5 or 6 weeks ago. The build was excellent. No screen separation issues and little light bleed. I ended up RMAing the device due to a weird screen issue where it was randomly tapping/swiping by itself every now and then.
I just received my new device which has an 80 serial number, and the screen is separating. If you sight down the edge of the top you can see that it actually bows out quite a bit toward the middle, and it clicks when I press it. SO FRUSTRATING!
Newegg's RMA procedure is as painless as it can be for an online purchase, but I think I'll return this one for a refund and purchase from Best Buy so I don't have to spend the foreseeable future shipping Infinities back and forth.
yeah
esoxx said:
I purchased my first tf700 from Newegg 5 or 6 weeks ago. The build was excellent. No screen separation issues and little light bleed. I ended up RMAing the device due to a weird screen issue where it was randomly tapping/swiping by itself every now and then.
I just received my new device which has an 80 serial number, and the screen is separating. If you sight down the edge of the top you can see that it actually bows out quite a bit toward the middle, and it clicks when I press it. SO FRUSTRATING!
Newegg's RMA procedure is as painless as it can be for an online purchase, but I think I'll return this one for a refund and purchase from Best Buy so I don't have to spend the foreseeable future shipping Infinities back and forth.
Click to expand...
Click to collapse
I bought one off amazon everything was great, then the corner of the screen start to click when I picked it up. :/ it was so perfect..............................................................................
Guys, there are like a thousand threads on these same issues already here, each with perfect solutions for dealing with the situation should it arise. Must we have yet another negative TF700 thread? My 700 is perfect, and so are the majority of people's as well. Continuing to populate the forums with these types of threads though does nothing but scare away potential developers from wanting to shell out the cash to pick up one of these tabs and develop awesome roms for us!
I do not mean to sound rude, nor am I flaming, but please, mods lock this thread before it spirals into something worse.
I agree with theanarchist that this is the same thread that we've all seen. But I also don't think most peoples tabs Are perfect. Some (like me) are still trying to find a perfect one And some have just accepted what they have and have given up. Others (like you) managed to get a perfect one.
Sent from my Galaxy Nexus using xda app-developers app
Mine is perfect as well. My mother, my uncle, my best friend Craig, and my in laws have a perfect unit too. So when I see threads like this, it makes me wonder if people have an agenda.
xRevilatioNx said:
Mine is perfect as well. My mother, my uncle, my best friend Craig, and my in laws have a perfect unit too. So when I see threads like this, it makes me wonder if people have an agenda.
Click to expand...
Click to collapse
Mine's not perfect, clicking near the hdmi port and you can click it from a good portion up towards the middle of the screen. I personally gave up on Asus, though hearing that there are people that have indeed perfect ones makes me wish I had exchanged it. I was hesitant because I had already returned a tf300 (screen issue) and then later the Prime that I had replaced the tf300 with. I had only returned the Prime to get the tf700, as I was pretty frustrated I couldn't get the gps to work EVEN with the dongle Asus sent me. I didn't have any wifi issues really nor any screen clicking issues with the Prime and though I like the infinity the screen clicking annoys me. Wondering if I should rma it directly to them, just don't want to get a different tab back or been in a worse situation as a result.
TheAnarchist1 said:
Guys, there are like a thousand threads on these same issues already here, each with perfect solutions for dealing with the situation should it arise. Must we have yet another negative TF700 thread? My 700 is perfect, and so are the majority of people's as well. Continuing to populate the forums with these types of threads though does nothing but scare away potential developers from wanting to shell out the cash to pick up one of these tabs and develop awesome roms for us!
I do not mean to sound rude, nor am I flaming, but please, mods lock this thread before it spirals into something worse.
Click to expand...
Click to collapse
There was an earlier thread that theorized that the build issues were being addressed in the more recently built devices. I posted to show that even with the more recent 80 serial number devices, the same issues are present on at least a percentage of tf700s.
I certainly have no agenda. I'm on my second Infinity, which will unfortunately also be going back. The first one had some extreme screen separation on the right hand side. It was an C06 serial number. The one I'm on now, my second is a C80 serial number. The screen is good, with just a slight clicking in one spot on the right hand side. I'd live with it. However the light leaking out onto the screen along the bottom and right side from the LEDs is very very noticible.
I won't give up. I really love everything about the TF700 except for the build quality issues that I have experienced. I think the OP has a valid point in saying that the issues are not fixed yet. When my second unit came, I was psyched to see the serial number on the box said C80. I was very disappointed that it too has issues.
I think...
I think the screen seperation can be because of the humidity. Where do u live?
killerdan56 said:
I think the screen seperation can be because of the humidity. Where do u live?
Click to expand...
Click to collapse
I don't think it's humidity. I live on the west coast of the US. Pretty dry here. I noticed a curve in the glass along the top of the screen as soon as I took it out of the box and removed the skin/wrapper. It's noticeably bowed out in the middle of that edge.
I just wanted to chime in to say that this is my 2nd C8. The 1st had a June build date and it came with the .22 firmware. I exchanged that one for this 2nd C8 which came with the .26 firmware and a 20120720 build date.
The 1st infinity had power and volume button issues and sharper than normal edges all around. I can't find anything wrong with the build on this second C8 other than the haptic feedback is set really low. (Does vibrate when power on)
I'm rooted and have the dmclient froze in titanium backup while I read up on NV flash. (Guarding against a forced OTA update) I made the mistake of applying the .30 OTA to soon last time.
effezie said:
I just wanted to chime in to say that this is my 2nd C8. The 1st had a June build date and it came with the .22 firmware. I exchanged that one for this 2nd C8 which came with the .26 firmware and a 20120720 build date.
The 1st infinity had power and volume button issues and sharper than normal edges all around. I can't find anything wrong with the build on this second C8 other than the haptic feedback is set really low. (Does vibrate when power on)
I'm rooted and have the dmclient froze in titanium backup while I read up on NV flash. (Guarding against a forced OTA update) I made the mistake of applying the .30 OTA to soon last time.
Click to expand...
Click to collapse
Glad to hear that. Hopefully, 3rd time will be the charm. I really do LOVE this tablet, I just want one that's solidly built and works.
Agreed. I don't see how humidity is going to affect Corning's Gorilla Glass 2. Seriously don't see this being a factor at all.
I suppose I am one of the luck ones as well, no discernable bleeding edge light and completely flat screen. Of course, I bought the 64GB model from BB online, and it already have .26 on it when it arrived.
I too just returned my c8 version today that suffered from light bleed, mushy/sticky power and volume buttons, separating screen which also had sharp 90 edges. The one I just picked up is a night and difference from the first one. This one is a c9 version and other than a little light bleed the construction is solid. It doesn't even appear to be the same tablet....its like the first one was a cheap knock off. Another thing I am noticing with this new one is that the speed of touch feedback is so much faster than the C8.
I did decide to purchase the extended warranty this time around...my experience with the prime has left me jaded and there is no way I'm going to be left holding a dud.
With that said, I suggest if possible to keep on returning them until you find a good one...they do exist!
If Asus can't be persistent with their perfection...Be persistent with the returns!
F me! Just noticed this one is creaking like an old rocking chair, its on the left side by the hdmi port.
Today, I swapped out my first C7 after owning it for a week and received a C8 as a replacement. It amazes me the differences between the two.
For my particular devices, the differences were:
C7 pros: The construction was very solid. I kept reading horror stories about screen lift, creaking, etc. and mine felt solid like a tank. No light bleed issues either.
C7 cons: It suffered from severe I/O issues. Trying to download something from the market would grind things to a halt until the download and install finished. The Browser lagged a bit as well........as did moving around the launcher or clearing items from the recents menu . I returned it because there was a spec of dust under the screen which just really bothered me.
C8 pros: It feels like they put better quality internals in this one! There have been none of the i/o issues, lag, or stutters. Everything is very responsive and snappy. From a software usability standpoint, this feels like a completely new device.
C8 cons: The physical build quality is definitely not as high as the first. There are spots around the edges of the glass that feel "squishy". There is also a bit more lightbeed but i would not call it bad by any means.
For now, I am going to keep the C8 because the performance difference alone is worth it. The minor physical build quality issues aren't bothering me enough yet to risk giving up the performance.
One trend I seem to have noticed after reading all these reviews is that the build date does not seem to have much correlation with physical build quality. However, it does seem that more recent models may be using higher quality internal components contributing to noticeable performance gain.
These are just my observations.

N8010: serious touchscreen / display bug, probably affecting whole batch / model

Hi,
I made this video to demonstrate a rather serious Galaxy Note 10.1 Bug
that i've encountered on two devices, bought from two separate stores.
The first device was a Note 10.1 N8010 with Jelly Bean, the second (the
one on the video) is a Note 10.1 N8010 with Ice Cream Sandwitch.
Transcript:
Hi.
I have in front of me a brand new Galaxy Note 10.1.. its a WIFI-model
N8010. With brand new i mean i bought it a couple of hours ago--here is
the recepit.
I already bought a Galaxy Note 10.1, same type and model.. about 6
Months ago, but its touchscreen suffered from a very weird
touchscreen-bug that was somewhat difficult to reproduce. When I tried
to return the first model, the device went away for almost 3 months and
when I got it back the bug was still there.
Since I was using the device mainly for writing assignments and taking
notes (thats why i bought it in the first place) i gave it back and went
to another store to buy a new one, hoping that the first place will give
me my money back. I needed the device urgently and it was, like i said,
3 months and I had to make a decision.
Well, as it turns out, though, the new device, the one you can see here,
has the same bug.. and I'm going to demonstrate it now.
Right now, as you can see, the device is not in a sane state.. and the
display hasn't turned off since I started speaking. The 2, well, the 4
dots, here, here, here and here.. this one is shaking.. the 4 dots are
supposed to indicate touch activity but are rather ghost-dots caused by
mentioned bug. Here for example is another dot.. I can make several of
them.. I can use a couple of fingers.. and.. this dot is caused by my
hand, the other ones by said bug. I can't do anything right now.. I
can't press on any of these buttons.. I can't call the menu, I can't
switch the homescreen left or right.. I can't drag the.. this thing
here, whatever its name is.. touch input is pretty much impossible.
How do you cause this bug? It's pretty simple.. you roll the palm of
your hand over the display. I can demonstrate this.. I can already
demonstrate this on the lockscreen, doesn't matter.. now, there are 3
dots.. and again.. well, lets try that one again.. now we see 4 dots..
and I can't unlock the lockscreen with my finger. I can though do it
with my pen. Alright.. like i said, you roll the palm of your hand over
the display.. angle and corner don't matter.. current application in
the foreground don't matter either. When this state is active.. it's
going to be almost impossible, I already mentioned that, to use
touch-input.. and with almost I mean there are certain situations where
touch-input will partially work.. but in most cases it won't. Like
you've seen the pen works in this state.. and sometimes, but just
sometimes, it will reset said state. I'm not sure.. I'm still not able
to use touch properly.. yeah, i'm still not able but the pen still
works. Let's reproduce it one more time.
If you want to reset this state your only option is to turn off the
display.. there you go. This bug occurs on ICS and JB.. this device here
has ICS, thats 4.0.4 and my last device, the one that i wanted to give
back.. is running JB 4.1.2, i think. (...) This bug is a show stopper
for everyone who'd like to use this device for lots of writing.. and
it's also a trouble maker since the repair-guys have a hard time
reproducing it, even if you provide them with a comprehensive video.
Now, I hope this video will reach someone who has the necessary access..
because, i don't know, either I'm very, very lucky and get my hands on
two exceptional devices with the exact same bug or this affects the
whole batch or every such model.
I can show perhaps a couple of other apps if the device will let me..
which it won't right now.. Its probably time to use the pen. For
example S-note.. pen works.. touch doesn't.. it's the same story, it
doesn't depend on the application or lockscreen or mainscreen, whatever.
Let me repeat: In this state, when you see these dots, the display will
never dim or go to sleep.. so if you write something and you don't
realize that the device is in such a state.. and you go somewhere for a
couple of hours.. you will come back and you will see that the display
never turned itself off and that you lost lots of battery.
If you want to contact me, i provided my address below (...) thanks for
watching."
Contact me at [ bergwitz at gmx.ch ]
Click to expand...
Click to collapse
Any help is appreciated.
bergwitza said:
Any help is appreciated.
Click to expand...
Click to collapse
I don't know what kind of help anyone's going to be able to provide. It's either a s/w problem which if you've hard reset the device and it's still there indicates a h/w problem. There's been some strangeness on particular regional versions of s/w. For example, different S Note versions have had various problems and different versions are shipped in different regional ROMs. You said two Note's you've had have the same problem though which doesn't make sense if one was ICS and one JB which means they were manufactured at different times so not from the same batch. Are you using a case with magnets in it? Some people have reported strange display issues when the Note's near magnets which causes electromagnetic interference.
The Note's been out since August and sold in the millions and this is the first this type of issue's been reported. So, to your point, maybe there was a batch of bad displays that got out and all ended up in whatever region you live in. Or all versions of your region's s/w has some type of display driver bug. Mine (from August) has no touch issues either via the pen or capacitive touches and I enabled "show touch" in the developer's settings to test it. It's also a pretty obvious issue so if it were common others would have commented or posted also.
The latest 4.1.2 s/w for the N8010 is for the Nordic Countries and was released in March. From your accent I'm guessing you're in the EU. The Nordic ROM is multi-CSC so can be used on any EU N8010. You might want to try installing it via Odin to see if it changes anything.
http://www.hotfile.com/dl/199761991/e927a4b/N8010XXUCMA8_N8010OXXCMB1_NEE.zip.html
BarryH_GEG said:
I don't know what kind of help anyone's going to be able to provide.
Click to expand...
Click to collapse
You provided help when you tried to reproduce the problem.
BarryH_GEG said:
It's either a s/w problem which if you've hard reset the device and it's still there indicates a h/w problem.
Click to expand...
Click to collapse
The first N8010 was reset a couple of times. The second wasn't but I guess that wouldn't make much of a difference.
BarryH_GEG said:
You said two Note's you've had have the same problem though which doesn't make sense if one was ICS and one JB which means they were manufactured at different times so not from the same batch.
Click to expand...
Click to collapse
Both had initially ICS. The first N8010 was upgraded to JB during the 3 month repair process.
BarryH_GEG said:
Are you using a case with magnets in it?
Click to expand...
Click to collapse
No, what you've seen in the video was just taken out of the box. There was nothing close or attached, just a tablet and two laptops on a table. The problem was initially reproducible in two different cities on several separate addresses.
BarryH_GEG said:
The Note's been out since August and sold in the millions and this is the first this type of issue's been reported.
Click to expand...
Click to collapse
Yes.. and that was pretty much the only reason why I was so convinced that my device was faulty and went out to get another one in order to get back to work as soon as possible. Now I have to deal with two retail stores.. trying to explain why I want a refund while looking like a shady guy who is trying to pull something.
BarryH_GEG said:
Mine (from August) has no touch issues either via the pen or capacitive touches and I enabled "show touch" in the developer's settings to test it.
Click to expand...
Click to collapse
Thanks for testing!
BarryH_GEG said:
It's also a pretty obvious issue
Click to expand...
Click to collapse
When touches are shown, yes. Otherwise, hell no.. it took me months to figure out what was wrong. I blamed all possible things for the various gitches that were a direct result of this bug.. mostly the apps I was using. When the touch-input freezes started to occur on a daily basis I started to debug.. which isn't that productive when you're not root. In the end I stumbled over the "show touches" option and was lucky that such an option even exists.
BarryH_GEG said:
From your accent I'm guessing you're in the EU.
Click to expand...
Click to collapse
Switzerland
BarryH_GEG said:
The Nordic ROM is multi-CSC so can be used on any EU N8010. You might want to try installing it via Odin to see if it changes anything.
Click to expand...
Click to collapse
Thanks for the link but right now I would just like to get my money back safely.. :|
Do you maybe know how to get in touch with samsung? Just in case the retail stores decide to give me a hard time..
I briefly experienced this issue while using my Note 10.1 in a place I don't usually use it (my brother's desk instead of my own). I was able to reproduce the issue many times by placing my palm on the screen just as in the video above.
Strangely enough, I haven't been able to reproduce the issue since that first time. I use my Note 10.1 in a number of different places (lecture halls, library, home desk, etc.), but can't seem to make it happen again.
I'm running a rooted, deodexed stock rom (4.1.2) on a NT-8013.
me too
Don't worry, you aren't crazy, I get this too.
I'm convinced its caused by pressure on the display components. My reasons are the following:
If i roll my palm across the screen relatively lightly (but still with enough pressure for the device to respond to normal touches) this never happens.
However as soon as i apply a littly more pressure I can replicate this problem every time. (To those reading thinking that I am putting an unreasonable amount of pressure on the device - I am not! I see people much more violent with their tablets day to day with no issue)
Furthermore, the more pressure I apply the longer the touches will stay after i remove my hand, suggesting that the device is kind of uncompressing.
Finally the area in which this is worst* there are some small LCD 'Mura' - that is light spots on the screen you can only see from some angles, these are normally the result of pressure.
I dont know about you guys but my note is pretty creaky, I would guess that there simply isnt enough rigidity to protect the screen components from stresses caused by pushing down on the device. (Note that i dont get this problem usually unless the device is sitting flat on its back.)
Dont get my wrong, I love my note and these issues are fortunately only an uncommon annoyance for me during typical use. But, this is kind of ****ty build quality and i will have reservations about buying another device from samsung.
*(e.g. if i roll my hand across the screen this is the most common area for a touch to 'stick')
drdoombot said:
Strangely enough, I haven't been able to reproduce the issue since that first time. I use my Note 10.1 in a number of different places (lecture halls, library, home desk, etc.), but can't seem to make it happen again.
Click to expand...
Click to collapse
In situations where I wasn't able to reproduce the bug (that happened every once in a while) I used a simple workaround: lock+unlock the screen and the bug was reproducible again.
6pool said:
you aren't crazy
Click to expand...
Click to collapse
You're right. After realizing that the second device has the same bug, I was close to declaring myself mental.
6pool said:
I dont know about you guys but my note is pretty creaky
Click to expand...
Click to collapse
Mine too. It feels cheap and the only reason I bought it is because of the pen.
6pool said:
these issues are fortunately only an uncommon annoyance for me during typical use.
Click to expand...
Click to collapse
What's your typical use? My typical use was writing and said bug made that very inconvenient. It basically prevented me from using touch-input after writing only a couple of lines..
Maybe a short update: I returned the second device, got my money back, and sent the first device once again to $REPAIR_GUYS, this time with a link to the video above.
I'm also thinking about buying a Note 8 if I get refund for the first device.
Bottom line: The tablet was supposed to replace all the cumbersome paper I have to deliver every week and I'm out of a working device since end of january. A huge waste of money, time, time and time.
bergwitza said:
Mine too. It feels cheap and the only reason I bought it is because of the pen.
Click to expand...
Click to collapse
Yeah if it wasn't for the pen I bet most people would have gone for something more sturdy/better screen/stock android.
It literally is the only device which can do annotation anywhere near properly though so Its a matter of priorities.
bergwitza said:
What's your typical use? My typical use was writing and said bug made that very inconvenient. It basically prevented me from using touch-input after writing only a couple of lines..
Click to expand...
Click to collapse
Typical use has been taking lecture notes for several hours a day, managed a years worth of university with it, and while its not perfect
it did save my back from having to lug around lots of books and notes.
I would guess that this issue is present on all devices, just at differing scales. Hopefully you can find one where it is at a level that doesn't
bother you, though I wouldn't blame you for giving up and avoiding Samsung from now on, must be a right pain.
bergwitza said:
I'm also thinking about buying a Note 8 if I get refund for the first device.
Click to expand...
Click to collapse
I would say that if you are planning on using the note 8 for lots of writing, maybe try it in store first, its probably way too small for any prolonged period, I find the 10.1 cramped and I have relatively small hands/writing. (Not helped by the fact the pen digitizer gets weird towards the edges of the screen)
Anyways, good luck!
6pool said:
I would say that if you are planning on using the note 8 for lots of writing, maybe try it in store first, its probably way too small for any prolonged period, I find the 10.1 cramped and I have relatively small hands/writing. (Not helped by the fact the pen digitizer gets weird towards the edges of the screen)
Click to expand...
Click to collapse
I never really used the whole screen for writing for various reasons:
1. the pen is not precise somewhere around the middle of the screen
2. the pen is not precise at the edges (as you mentioned)
Reason 2 is something all wacom digitizers seem to share (I remember watching a guy on youtube demonstrating the "edge-effect" on the note and two other, professional wacom devices), reason 1 I can't explain.
Anyway, I always ended up just using the upper half of the screen and that's basically the main reason why I think it wouldn't make much of a difference. But on the other hand my gut tells me that you could be right.
Right now I can't shake the feeling that the note is just some random entity in Samsung's massive brute-force output. Never mind the details or the quality, after 5 different pen-tablets the fifth iteration will be just fine. Sounds a lot like Agile SW development.. just with hardware.
Same problem, demonstrated by someone else:
Have two tablets stock and no root. I have none of the described bugs and these 2 tablets are solid and very well built. Solid as any tab that I have owned. That is a strange problem and probable a batch built on Friday about quiting time.
None of those issues could have been reproduced on my Note 10.1 (GT-N8000) from Germany. Mine was bought in October 2012.
Sorry to hear that you have gotten two faulty devices :-/
Grüße aus Deutschland
Sent from my GT-N8000 using XDA Premium HD app
I have went through 3 of these tablets, ended returning each one to best buy. I absolutely love it for drawing and sketching....until the screens bugged up. All three of mine where the gray version, I'm tempted to pick up a white and give it a try.
Btw ...the second video posted in this thread is mine. :cyclops:
Interesting thread, after reading it I decided to test mine and it's not suffering with that bug, I'm in the UK and brought it 2 months ago, it's the grey variant
Sent from my GT-N8010 using Tapatalk 2
aaronbass said:
I have went through 3 of these tablets, ended returning each one to best buy. I absolutely love it for drawing and sketching....until the screens bugged up. All three of mine where the gray version, I'm tempted to pick up a white and give it a try.
Click to expand...
Click to collapse
Wait, are you saying that all 3 had the same bug?
ch0ka said:
None of those issues could have been reproduced on my Note 10.1 (GT-N8000) from Germany. Mine was bought in October 2012.
Sorry to hear that you have gotten two faulty devices :-/
Grüße aus Deutschland
Sent from my GT-N8000 using XDA Premium HD app
Click to expand...
Click to collapse
Smartie36 said:
Interesting thread, after reading it I decided to test mine and it's not suffering with that bug, I'm in the UK and brought it 2 months ago, it's the grey variant
Sent from my GT-N8010 using Tapatalk 2
Click to expand...
Click to collapse
Thanks to both of you for testing.
bergwitza said:
Wait, are you saying that all 3 had the same bug?
Thanks to both of you for testing.
Click to expand...
Click to collapse
Yep, all three had the same issue.
At first I thought the screen bug was from the tablet getting too hot while sketching (SketchBook). The tablet was pretty warm, not uncomfortable to touch or anything. Possibly overheating?
While streaming Netflix, the touch dots would randomly appear and not go away. The tablet wasn't warm like before when I was sketching and it wasn't even being touched.
Still tempted to try another one, i did love it when it was working and there aren't any other android devices sporting the wacom digitizer
Update:
After almost four months, some Samsung technician/representative reluctantly decided to issue a refund. Reluctantly because, and I quote, out of 100 times he tried to reproduce the bug demonstrated in not one but two videos.. he succeeded only once.
Not really satisfying but, oh well, if they dont give a f.., I won't either.
Any updates
Hi
I bought this Note for my girlfriend as a Christmas gift. She's loaded a few apps and mainly uses it to look up stuff on the web, FaceBook and things like that. The issue is the screen starts twitcihing and types random letters and will switch pges and change settings. I did a factory reset via the reset option in the settings tab. That did not help. I will post a video tonight showing the issue. Are there any other option out there??!!
Thanks
Dash
Touchscreen fixed with better USB cord on Note 10.1 2014
I have the same issue on Note 10.1 2014 SM-P605.
I've tried changing apps, dozens of keyboard settings, device covers, screen protectors, pen input, finger input, touching the corners to recalibrate, turning the divice upside down, locking, unlocking, running different tabs in chrome...way too much time on this issue.
Finally I found the cause.
A cheap monoprice USB cable attached will produce the problem 100% of the time.
Using a heafty stock USB cable works 100% of the time.
I spent three days setting up this new tablet. And it worked flawlessly, until the last day when I moved to a new room.
Now I'm loving it again.
i have problem in touch in several flashing my touch not working anymore anyone can spare me a helping hand to solve this issue sorry for my bad

[Q] Second RMA Screen issues?

This will be my second replacement through Amazon. My first unit wouldn't read any sim I placed in the device which I just put down to bad luck considering I couldn't find any other user with the same issue. The second (my current unit) has developed a sort of LCD distortion around the mid right of the screen. When touched it is visible enough to cause me to notice it when using apps with lighter backgrounds, it is even more prominent when using the stylus. I have never encountered this on any touch screen I have used before and was wondering if anyone else has had this? I saw a thread on the NVIDIA forums discussing it but not on here.
I will say this much for sure, on the two units so far the battery life has been terrible. I really want to love this device as overall it's been great for games and emulation... but with all the issues and battery life i'm thinking that if this unit is no better i'll give this tablet a miss and hope the next version is fixed.
SamualStrand said:
This will be my second replacement through Amazon. My first unit wouldn't read any sim I placed in the device which I just put down to bad luck considering I couldn't find any other user with the same issue. The second (my current unit) has developed a sort of LCD distortion around the mid right of the screen. When touched it is visible enough to cause me to notice it when using apps with lighter backgrounds, it is even more prominent when using the stylus. I have never encountered this on any touch screen I have used before and was wondering if anyone else has had this? I saw a thread on the NVIDIA forums discussing it but not on here.
I will say this much for sure, on the two units so far the battery life has been terrible. I really want to love this device as overall it's been great for games and emulation... but with all the issues and battery life i'm thinking that if this unit is no better i'll give this tablet a miss and hope the next version is fixed.
Click to expand...
Click to collapse
I have this issue with my tablet, and unfortunately lots of people on the geforce forums are as well. Supposedly the RMA units being sent out as replacements overwhelmingly have the same issue (See Jasons posts at https://forums.geforce.com/default/topic/793383/shield-tablet/nvidia-guilty-of-fraud/1/). I have an RMA being sent to me as we speak, and I really hope I don't have this problem again.
bill0405 said:
I have this issue with my tablet, and unfortunately lots of people on the geforce forums are as well. Supposedly the RMA units being sent out as replacements overwhelmingly have the same issue. I have an RMA being sent to me as we speak, and I really hope I don't have this problem again.
Click to expand...
Click to collapse
I contacted Amazon to ask about the feedback they have received on units they've sold, the customer service advisor claimed nothing but positive feedback and no issues such as the ones on the Nvidia forums. All of that said, from what i've seen so far, this tablet is riddled with manufacturing flaws and i'm worried the lifespan will be much shorter than any smartphone or tablet I have bought before.
I feel sorry for the consumers who have had to RMA they're units multiple times, this will be my third Shield Tablet and it seems many others have gone through 3 or more to find one that is right, is this acceptable?
Then others score a perfect tablet like myself.
Same thing with phones, when N5 was released, never saw so many go through so many returns to achieve a level of some perfection.
Yet, the two I bought were perfect, I just don't get it myself neither.
Same happened with N7(13), N4 and N7(12).
I never had to return one because it was defective.
I read about this supposedly sub par in cell tech used on our display, that it distorts under pressure. I called bs on it first time I read it, tested myself, had to push so hard moisture in my skin wouldn't allow me to slide my finger on display.
Seem excessive?
Sure does, now if you're just touching it an it happens it is an issue, but if you can see blood pooling under your finger nail, the defect is above screen level IMO.
Harsh maybe, I'm sorry but that's my view on it here.
WR
WarRaven said:
Then others score a perfect tablet like myself.
Same thing with phones, when N5 was released, never saw so many go through so many returns to achieve a level of some perfection.
Yet, the two I bought were perfect, I just don't get it myself neither.
Same happened with N7(13), N4 and N7(12).
I never had to return one because it was defective.
I read about this supposedly sub par in cell tech used on our display, that it distorts under pressure. I called bs on it first time I read it, tested myself, had to push so hard moisture in my skin wouldn't allow me to slide my finger on display.
Seem excessive?
Sure does, now if you're just touching it an it happens it is an issue, but if you can see blood pooling under your finger nail, the defect is above screen level IMO.
Harsh maybe, I'm sorry but that's my view on it here.
WR
Click to expand...
Click to collapse
It's definitely a problem with this tablet, that and the cracked edges i've been seeing a lot of topics on. I've been using touch screen devices since around the time of the 1st generation iPod touch and i've never returned a single product back with any of the issues i've had/seen with this tablet which I am now on my third unit.
The screen itself needs little pressure for the screen to distort, which is now in two places on the screen. I'm far too careful with my devices and do not use excessive pressure on the screen.
SamualStrand said:
It's definitely a problem with this tablet, that and the cracked edges i've been seeing a lot of topics on. I've been using touch screen devices since around the time of the 1st generation iPod touch and i've never returned a single product back with any of the issues i've had/seen with this tablet which I am now on my third unit.
The screen itself needs little pressure for the screen to distort, which is now in two places on the screen. I'm far too careful with my devices and do not use excessive pressure on the screen.
Click to expand...
Click to collapse
Yes, I do believe there are some bad units made.
Nvidia is a gem for standing behind unit so well.
Hopefully you get a decent one soon.
WR
SamualStrand said:
I contacted Amazon to ask about the feedback they have received on units they've sold, the customer service advisor claimed nothing but positive feedback and no issues such as the ones on the Nvidia forums. All of that said, from what i've seen so far, this tablet is riddled with manufacturing flaws and i'm worried the lifespan will be much shorter than any smartphone or tablet I have bought before.
I feel sorry for the consumers who have had to RMA they're units multiple times, this will be my third Shield Tablet and it seems many others have gone through 3 or more to find one that is right, is this acceptable?
Click to expand...
Click to collapse
I'm happy to say the RMA'd unit I received is in great working order. No screen issues, no battery issues, wifi is good, and speakers/build quality are good.
Hi there yes mine to has a screen distortion around the sim card area . if I press harder with pressure but with the stylus its fine
I will Returning this to amazon where I had purchased from
bill0405 said:
I'm happy to say the RMA'd unit I received is in great working order. No screen issues, no battery issues, wifi is good, and speakers/build quality are good.
Click to expand...
Click to collapse
Since you have no battery issues, what is your screen on time like during a full cycle. I have been wondering since I get only about 3 1/2 hours.

Essential phone weight theory

A while ago, i saw a post regarding the weight of the essential phone changed from the older devices. when i went to best buy to exchange it, it weighed noticeably heavier than the previous phone i had. also, the last phone had a slippery gloss and had problems. the new one i replaced hasnt given me a problem and im quite happy with it because some usual bugs others experienced.
i dont know what the weight of the last one is, but what i want to make a thread of is have your phone weighed, post the weight and reply with the list of issues and feel of the device. lets see if there theres any theory to this.
so my phone is:
.4lbs or 6.4 oz.
not that slippery compared to the last one
camera works pretty good
doesnt get hot easily, battery life lasts 5-6 hours on screen time
Interesting that phones would have different weights.
6.6 oz on a postal scale. Purchased yesterday, haven't started using it yet.
DrvLikHell said:
Interesting that phones would have different weights.
6.6 oz on a postal scale. Purchased yesterday, haven't started using it yet.
Click to expand...
Click to collapse
Was that phone on the scale by itself?
Sent from my PH-1 using Tapatalk
Yes, well, phone, sim card and original plastic film protector things that were on it in the box.
Anyone else?
If I had a way to measure I would, I'm curious. Mine is a white sprint variant and the finish is glossy but I'm not sure what to compare it to, it's not slippery though.
bavarianblessed said:
If I had a way to measure I would, I'm curious. Mine is a white sprint variant and the finish is glossy but I'm not sure what to compare it to, it's not slippery though.
Click to expand...
Click to collapse
go to a deli or subway and weight it. even those fruit weights at the supermarket works
Jonathanlc2005 said:
A while ago, i saw a post regarding the weight of the essential phone changed from the older devices. when i went to best buy to exchange it, it weighed noticeably heavier than the previous phone i had. also, the last phone had a slippery gloss and had problems. the new one i replaced hasnt given me a problem and im quite happy with it because some usual bugs others experienced.
i dont know what the weight of the last one is, but what i want to make a thread of is have your phone weighed, post the weight and reply with the list of issues and feel of the device. lets see if there theres any theory to this.
so my phone is:
.4lbs or 6.4 oz.
not that slippery compared to the last one
camera works pretty good
doesnt get hot easily, battery life lasts 5-6 hours on screen time
Click to expand...
Click to collapse
What is the hardware version!?
I'll try and weigh mine on my reloading scale tomorrow. HW version 18
renegadeMind said:
What is the hardware version!?
Click to expand...
Click to collapse
I would assume probably the same because I threw away the box I think
Sent from my PH-1 using Tapatalk

Pixel 4a creaky case issues

Hi,
I have recived a brand new pixel une weeks ago. After a week the case start to creaky/squeaky if pressed.
There is a lot of post on reddit...you can search it. I made a video to show the issue.
Google is sending me a new phone....I hope it have no issues.
My First Pixel 4a:
Second pixel after RMA:
some references:
https://www.reddit.com/r/GooglePixel/comments/ijqkl5/squeaky_back_on_4a/
https://www.reddit.com/r/Pixel4a/comments/irm64t/creaky_body/
https://www.reddit.com/r/Pixel4a/comments/ixgw2b/how_widespread_is_the_creaking/
https://www.reddit.com/r/GooglePixel/comments/ja73ic/pixel_4a_creaky_body_design_flaw/
https://www.reddit.com/r/Pixel4a/comments/irm64t/creaky_body/g505v5z/?context=3
https://www.reddit.com/r/Pixel4a/comments/jdjkot/pixel_4a_back_cover_squeaking_when_pressed_just/
https://www.reddit.com/r/pixel_phon...el_4a_creaking_flexing_on_the_back_under_the/
https://www.reddit.com/r/Pixel4a/comments/ixan3u/how_is_the_build_quality/
ikxdf said:
Hi,
I have recived a brand new pixel une weeks ago. After a week the case start to creaky/squeaky if pressed.
There is a lot of post on reddit...you can search it. I made a video to show the issue.
Google is sending me a new phone....I hope it have no issues.
There is the video:
https://www.youtube.com/watch?v=l87DgIugLT4
some references:
https://www.reddit.com/r/GooglePixel/comments/ijqkl5/squeaky_back_on_4a/
https://www.reddit.com/r/Pixel4a/comments/irm64t/creaky_body/
https://www.reddit.com/r/Pixel4a/comments/ixgw2b/how_widespread_is_the_creaking/
https://www.reddit.com/r/GooglePixel/comments/ja73ic/pixel_4a_creaky_body_design_flaw/
https://www.reddit.com/r/Pixel4a/comments/irm64t/creaky_body/g505v5z/?context=3
https://www.reddit.com/r/Pixel4a/comments/jdjkot/pixel_4a_back_cover_squeaking_when_pressed_just/
https://www.reddit.com/r/pixel_phon...el_4a_creaking_flexing_on_the_back_under_the/
https://www.reddit.com/r/Pixel4a/comments/ixan3u/how_is_the_build_quality/
Click to expand...
Click to collapse
People on reddit seem convinced that because their phone doesn't work then no phones work, and google sucks and why don't google listen to me, and i'm getting an iphone.
I put a case (spigen tough armor) on my phone and I can't hear a squeak. Maybe if I took the case off and tried to squash my phone I'd hear a squeak, but why would I want to do that? I wouldn't have thought there'd be much give; it's unlikely to be a case of "first it squeaks and then it breaks" because you can't push it that far. Perhaps if you pushed it really hard.... But it reminds me of the old joke "Doctor, it hurts when I do this"..."Well, stop doing it then".
_a! said:
People on reddit seem convinced that because their phone doesn't work then no phones work, and google sucks and why don't google listen to me, and i'm getting an iphone.
I put a case (spigen tough armor) on my phone and I can't hear a squeak. Maybe if I took the case off and tried to squash my phone I'd hear a squeak, but why would I want to do that? I wouldn't have thought there'd be much give; it's unlikely to be a case of "first it squeaks and then it breaks" because you can't push it that far. Perhaps if you pushed it really hard.... But it reminds me of the old joke "Doctor, it hurts when I do this"..."Well, stop doing it then".
Click to expand...
Click to collapse
sorry....the intersting part is not the quality of comments but the quantity of issues. My phone creaks near the sim slot. Now my phone is in my pocket and my poket is squeaking while i am walking....
Fortunately, after a discussion, seems google freeze my 15 day s period for "satisfied or refunded" policy: if my second pixel is creaky i can return it because is
definitely a production problem. I love my pixel 4a....but creaky is not acceptable for me.
ikxdf said:
Now my phone is in my pocket and my poket is squeaking while i am walking....
Click to expand...
Click to collapse
Right, yes that doesn't sound good!
Despite the negative commentary your device clearly has a build problem and should be managed under warranty. While I always use a case (spigen) that should not be an expectation unless specified by manufacturer and included with device.
FWIW - I do not have that issue (phone still feels solid sans case) but also use & carry it in a manner that rarely flexes the body/frame.
DB126 said:
Despite the negative commentary your device clearly has a build problem and should be managed under warranty. While I always use a case (spigen) that should not be an expectation unless specified by manufacturer and included with device.
FWIW - I do not have that issue (phone still feels solid sans case) but also use & carry it in a manner that rarely flexes the body/frame.
Click to expand...
Click to collapse
it start creaking after ~1 week. I use it normally and don't use skinny jeans. Seems like...it have no glue on border or missing pin on plastic case....
Today it start creaky sound near power button....
Mine creaks sometimes but its a budget device made out of plastic. Can't be expecting flagship level build quality.
mrsatan said:
Mine creaks sometimes but its a budget device made out of plastic. Can't be expecting flagship level build quality.
Click to expand...
Click to collapse
Respectfully disagree. Used lower end Moto phones for years, some half the price of the 4a. Never had a build quality issue (might have got lucky too). Plastic can be fine if overall structure is properly engineered. So far no issues with my 4a but it also rides in a protective case.
this is my second pixel after RMA:
Well, mine is also making hardcore creaking sound when being pushed between the buttons. Feels like I can shove it 1mm inside. But nowhere else do I get noises. Don't like that...
Mine is creaking real bad near the power button....returned and got a new one from amazon...so far so good, fingers crossed considering this issue seems to popup after a week or two of use
soundgarden104 said:
Mine is creaking real bad near the power button....returned and got a new one from amazon...so far so good, fingers crossed considering this issue seems to popup after a week or two of use
Click to expand...
Click to collapse
firste device...1week and second device only 3 days without creaky
Hi,
my Pixel started creaking near SIM card tray after cca 1 week. It is not that annoying currently but if it gets worse, I will consider RMA.
Anyway, I may as well live with it for the next year, 1,5y and only then do RMA Free new phone every 2 yrs - not bad
creak near the camera seems common, people claiming no creak might be using cases, because it doesn't creak in a case.
and the creak is not an issue more of an annoyance, which is fine with me.
One day after voting my device started creaking. Suddenly the device feels really cheap
anyone know how to fix this creeky issue? i
Yes buy a Motorola, which funnily enough Google bought then sold just to strip the patents. BUT unfortunately they didn't steal the build patents!... Sigh... More money than sense.
the creaking stopped thankfully, hope it stays that way, also got a case
My pixel 4a was making noise when pressing in the back under the camera and between the power and volume buttons, as well as over the power button. I ordered a replacement from Google but after few days, the same noise at the same location came back on the new device.
Despite I love this phone, I wouldn't have bought this device if I knew about this issue. I believe this is due to a bad internal design plus the heat of the CPU (actually the heat comes from the same area as the noise, so this could be what is destroying the glue of the case).
Arctic5824 said:
the creaking stopped thankfully, hope it stays that way, also got a case
Click to expand...
Click to collapse
Did you do something? Or it simply stopped?

Categories

Resources