Database Info

[rom] [tw 4.3][ml1] samstock 1/6/14

THANKS TO...
-old&slow
-decimalman
This is a modded stock TouchWiz 4.3 rom.
Built on the device for the device.
You need to be rooted and unlocked to utilize this rom.
MODS...
-Optimized ram disk.
-Extensive build properties.
-Init.d scripting for a speedy rom.
-Added Xposed framework for additional settings such as 4-way reboot.
-Adjusted frame buffer for speed.
DOWNLOAD...
http://www.androidfilehost.com/?fid=23269279319202464
XDA:DevDB Information
SAMSTOCK Version 1.0, a ROM for the Verizon Samsung Galaxy S III
Contributors
razz1, old&slow
ROM OS Version: 4.3.x Jellybean
ROM Firmware Required: ROOTED UNLOCKED
Based On: STOCK
Version Information
Status: Stable
Current Stable Version: VERSION 1.0
Stable Release Date: 2014-01-06
Created 2014-01-06
Last Updated 2014-01-06

Reserved

Great, another 4.3 ROM to play with. Thanks

slvfox said:
Great, another 4.3 ROM to play with. Thanks
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sweet, cant wait to try this out!

skrypj said:
Sweet, cant wait to try this out!
Click to expand...
Click to collapse
After reading my response, it does sound a little sarcastic. I think it's great to have another developer working on this.

Thank you for providing this for the community! Does it use the same DKP kernel that old&slow's build utilizes? I'm guessing yes, since he was thanked in the OP.

MrBrady said:
Thank you for providing this for the community! Does it use the same DKP kernel that old&slow's build utilizes? I'm guessing yes, since he was thanked in the OP.
Click to expand...
Click to collapse
Yes it does
Sent from my SCH-I535 using Xparent Cyan Tapatalk 2

Thanks for another 4.3 rom to try out. Do I need to be on the ML1 modem?

Jihoonie said:
Thanks for another 4.3 rom to try out. Do I need to be on the ML1 modem?
Click to expand...
Click to collapse
It would probably be best but not a necessity.
Sent from my SCH-I535 using Xparent Cyan Tapatalk 2

Just flashed the stock ROM... Darn. Thanks for the hard work!
Sent from my SCH-I535 using xda app-developers app

Would this ROM be similar enough to old&slow's that it can be flashed over it without wiping data? Sounds like it's the same as old&slow but with some optimizations.

Is this debloated?

MrBrady said:
Would this ROM be similar enough to old&slow's that it can be flashed over it without wiping data? Sounds like it's the same as old&slow but with some optimizations.
Click to expand...
Click to collapse
Just answered my own question - NO. Got stuck in "Optimizing Apps...".
EDIT: I think the answer is NO partly because of the build.prop handling of the dalvik cache. That's why it gets stuck at optimizing apps.

razorr69 said:
Is this debloated?
Click to expand...
Click to collapse
nope. but definitely faster than stock 4.3

Thanks for all the thumbs up guys. Its really appreciated!

The tweaks made in this ROM certainly make it feel smoother!
However, I'm having some issues restoring my apps via TiBu, specifically Poweramp Unlocker. TiBu freezes when restoring and then the system gets stuck at Updating Apps upon reboot. I have to manually delete data/app/com.maxmpz.audioplayer.unlock through TWRP's File Manager.
I don't know if it's with this ROM in particular or if I just have a corrupt backup, but the first time I came across this issue was after installing this ROM.
EDIT: I'm more convinced it's something with this ROM because it freezes when installing the same app from the Play Store as well.

Jihoonie said:
Thanks for another 4.3 rom to try out. Do I need to be on the ML1 modem?
Click to expand...
Click to collapse
I would say yes since I flashed and call works but the person on the other end hears an echo. When ML1 is flashed the echo is gone. Flash the modem before or after, really doesn't matter.

This is running real smooth. I did dirty flash from the stock ROM and all is fine.
Sent from my SCH-I535 using xda app-developers app

TiB Issue Too
I had the same exact issues with TiB locking up on PowerAmp. Then a reboot wielded a freeze on Optimizing Apps.

djcrystals said:
I had the same exact issues with TiB locking up on PowerAmp. Then a reboot wielded a freeze on Optimizing Apps.
Click to expand...
Click to collapse
MrBrady said:
The tweaks made in this ROM certainly make it feel smoother!
However, I'm having some issues restoring my apps via TiBu, specifically Poweramp Unlocker. TiBu freezes when restoring and then the system gets stuck at Updating Apps upon reboot. I have to manually delete data/app/com.maxmpz.audioplayer.unlock through TWRP's File Manager.
I don't know if it's with this ROM in particular or if I just have a corrupt backup, but the first time I came across this issue was after installing this ROM.
EDIT: I'm more convinced it's something with this ROM because it freezes when installing the same app from the Play Store as well.
Click to expand...
Click to collapse
Yeah me three. I couldn't install trickster mod either.. tibu froze on me 3 times

[ROM] AOSP/Code Aurora Vanilla Android 4.4.2 for Moto G

AOSP/Code Aurora Vanilla Android 4.4.2 for Moto G​
This build is based on sources directly from Code Aurora which is AOSP plus all Qualcomm specific enhancements and optimization.
Build instructions can be found here: https://github.com/razrqcom-dev-team/android_local_razrqcom/tree/aosp-caf-8226
Device tree is here https://github.com/dhacker29/android_device_motorola_falcon
This build has been optimized to be a one build for all variants (xt1032, xt1033, xt1034 and cdma as well should work).
I accomplished this through a little magic in the init.mmi.rc to set ro.hw.radio based on the ro.boot.radio value, from there I use init.mmi.radio.sh to set the appropriate build.prop values based on the radio detected to be stock for the device.
Known Issues: Canera does not work
Download: Latest Downloads HERE
Gapps: http://d-h.st/eWW
ClockWork Mod Recovery for 4.4 bootloader: CWM6046-MotoG44.img
TWRP 2.6.3.1 for 4.4 bootloader: TWRP2631_MotoG44.img Touch is fixed for the most part but occasional reset to main screen. I am working with Dees Troy to get a fix.
xt1033 needs the 4.4.2 modem to work with this rom
Recovery flashable 4.4.2 modem: MotoG_4.4.2_modem.zip
If you wish to return to stock via back up and not fastboot here is a flashable 4.3 radio for xt1033
Recovery flashable 4.3 modem for xt1033 MotoG_4.3_xt1033_modem.zip
Remember this is a AOSP stock android build so if you want root you need to flash the Super{User/SU} of your choice.
Also, There is no gapps backup script so they need to be reflashed with each update.
Click to expand...
Click to collapse
Changelog:
1-25-14: Fixed dialer force close
Added custom audio routing
Fixed in call audio
Click to expand...
Click to collapse
Enjoy!
Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Thank you will try this, this weekend. You're doing great work for the moto G?
Witty witticisms

Hi I just tried flashing this on my xt1032 and CWM hung during the install, I left it for about 10 mins before forcing a reboot.
On another note I would like to say thanks for all the work you are putting into this phone
Sent from my XT1032 using xda app-developers app

That's odd I've not had any error flashing. Which cwm?
Sent from my Moto G using xda app-developers app

Your 6.0.4.6 build, I have also had this problem when trying to flash slimkat and gummy
Sent from my XT1032 using xda app-developers app

Same in here, on the latest CWM 6.0.4.6 from a1pha.

Me too. CWM6.0.4.6
Sent from my XT1032 using XDA Premium 4 mobile app

flashed ok for my on CWM6.0.4.6

I just tried flashing again and it worked. It took almost 9 mins to flash ( I did time it this time lol, but it seemed much longer). It did look like CWM had hung but then without the blue bar going up it came up with install finished.
So be patient people and sorry for the false alarm.
Sent from my Moto G using xda app-developers app
---------- Post added at 02:55 PM ---------- Previous post was at 02:53 PM ----------
debaj said:
Same in here, on the latest CWM 6.0.4.6 from a1pha.
Click to expand...
Click to collapse
Cwm 6.0.4.6 is built by dhacker29 a1pha created the first cwm 6.0.4.5 and his since removed his build and linked dhacker29's build
Sent from my Moto G using xda app-developers app

Thanks the clarification, sometime today I'll try it again.

Kind of laggy, but that's alpha after all
No signal in dual sim, FC in com.android.phone when accessing mobile network. Sim Toolkits FC too.
Logcat radio attached

busquet said:
Kind of laggy, FC in com.android.phone when accessing mobile network
Click to expand...
Click to collapse
Same problem with my xt1032
Sent from my Nexus 7 using xda app-developers app

Could this sources be used to build aosp-based roms?

@dhacker29 can you share what caf branch and manifest you used?
and thanks for all the great roms, hopefully i get my hands on a unreleased rom source so i can contribute too

Build instructions added to OP

Every thing is laggy to you guys.......... I don't know why I waste my time.

Thank you for this! I've been waiting for a pure AOSP build!

dhacker29 said:
Every thing is laggy to you guys.......... I don't know why I waste my time.
Click to expand...
Click to collapse
sorry, man, didn't mean that, just stating some stuff about the rom! I admire your effort in making these builds for us, and it's amazing you are getting them to work in every Moto G version!
I wish I could understand a bit more of building Android and all, I'm really looking forward to this. I'll try to do my best to test and learn how to cooperate with you, guys!
Enviado de meu XT1033 usando Tapatalk

busquet said:
sorry, man, didn't mean that, just stating some stuff about the rom! I admire your effort in making these builds for us, and it's amazing you are getting them to work in every Moto G version!
I wish I could understand a bit more of building Android and all, I'm really looking forward to this. I'll try to do my best to test and learn how to cooperate with you, guys!
Enviado de meu XT1033 usando Tapatalk
Click to expand...
Click to collapse
No worries I guess I am to micro focused on getting things to work I don't use games and audio I am busy compiling lol so I don't notice any lag. I fixed the phone force close and audio should be straight new builds in a few.

New build up fixed the phone fc and in call audio. Still only one sim working on dual sim versions for now.

[ROM][4.4.4][hboot 2.16][17-MAR] CyanogenMod 11 HTC One S

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CyanogenMod is an open source operating system which is based on the Android mobile platform (4.4.x 'KitKat'). It is developed as free and open source software based on the official releases of Android by Google, with added original and third-party code.​
Installation instructions:
Make sure you are running Unofficial TWRP 2.8.7.1 or any other recovery compatible with hboot 2.16
Wipe dalvik cache, cache, *data (*=only if coming from another ROM)
Flash ROM
Flash Open GApps or any other AOSP 4.4.4 compatible GApps
*fastboot flash boot boot.img (*=only if S-ON)
NOTE: Don't install updates offered by OS as they are official updates and are not compatible with hboot 2.16
Screenshots​
Downloads
GDrives
Google Drive​[URL="http://forum.xda-developers.com/devdb/project/dl/?id=17417"]XDA DevDB[/URL](latest NIGHTLY build)​Changelog: http://www.cmxlog.com/11#​
Kernel source: GitHub​
FAQ​ART compatible​You can edit "build.prop" in sytem directory and change "lcd density" to 256​
XDA:DevDB Information
UNOFFICIAL CyanogenMod 11, ROM for the HTC One S
Contributors
cikoleko, mdmower
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: hboot 2.16
Version Information
Status: No Longer Updated
Current Stable Version: SNAPSHOT-M11
Stable Release Date: 2014-10-10
Current Beta Version: NIGHTLY
Beta Release Date: 2016-03-17
Created 2014-01-26
Last Updated 2016-03-17

MUST READ
The reason I write "#NOT Tested" when I add a new release:
I don't personally flash it and check if it works. It is obviously better to do that so I'm sure it works and no one will get a boot loop or something which sometimes does cause a problem, it would be much better if someone could test it but upload time would be delay a lot because it's almost impossible to do it straight away after I build it.
Known Issues:
Tell us if you find any
Credits:
@drkxyz for tutorial
@mdmower for compatible recovery​

Have reboot when using GPS?

moverat said:
Have reboot when using GPS?
Click to expand...
Click to collapse
You mean it reboots for you when using gps? I just tried maps, looks all right for me but I'm on ART in case you're on Dalvik, don't know will it make any difference though

cikoleko said:
You mean it reboots for you when using gps? I just tried maps, looks all right for me but I'm on ART in case you're on Dalvik, don't know will it make any difference though
Click to expand...
Click to collapse
I play Ingress, assembly CM cause restarts when trying to run a minimized application from the desktop.
Try your build, accomplish your goal.
How do you assess the energy consumption?

gapps is also available from the cyanogenmod wiki http://wiki.cyanogenmod.org/w/Gapps

epsiblivion said:
gapps is also available from the cyanogenmod wiki http://wiki.cyanogenmod.org/w/Gapps
Click to expand...
Click to collapse
Are you sure? I thought they are only for hboot 2.15, at least when I tried to install them earlier this year I couldn't even flash them

cikoleko said:
Are you sure? I thought they are only for hboot 2.15, at least when I tried to install them earlier this year I couldn't even flash them
Click to expand...
Click to collapse
I've flashed them using cwm 6.0.4.4 on the latest 2.16 build in the other thread (1/13).

Not sure why but I flashed this rom twice, once over an earlier build and once with a full wipe, and each time the rom boots up and everything seems to work but when I reboot, it gets stuck on the boot animation

redspeed said:
Not sure why but I flashed this rom twice, once over an earlier build and once with a full wipe, and each time the rom boots up and everything seems to work but when I reboot, it gets stuck on the boot animation
Click to expand...
Click to collapse
Are you s-off? Personally I don't have any problems because l'm using this rom myself. I made a new version today, I'll upload it later on

cikoleko said:
Are you sure? I thought they are only for hboot 2.15, at least when I tried to install them earlier this year I couldn't even flash them
Click to expand...
Click to collapse
GAPPS are not hboot dependant, only ROM is. If you couldn't flash them it was for some other reason

#Added 01/26, you can find it in the link under 'dowanloads'. Don't know is it successful build because went outside when building and when came back my battery is dead so I haven't flashed it yet.

cikoleko said:
#Added 01/26, you can find it in the link under 'dowanloads'. Don't know is it successful build because went outside when building and when came back my battery is dead so I haven't flashed it yet.
Click to expand...
Click to collapse
Is this one a working rom? Someone flashed it? It works? Bugs?
i need a daily working rom, so i will wait for some feedback before try this one

searchworlds said:
Is this one a working rom? Someone flashed it? It works? Bugs?
i need a daily working rom, so i will wait for some feedback before try this one
Click to expand...
Click to collapse
No one wrote anything about that even though I think people downloaded it (strange) but I'm using it myself, no problem for me at least. It's pure CM11 just compatible with hboot 2.16.

cikoleko said:
No one wrote anything about that even though I think people downloaded it (strange) but I'm using it myself, no problem for me at least. It's pure CM11 just compatible with hboot 2.16.
Click to expand...
Click to collapse
I install it right now (20140127), report after.
What kernel can we flash to have S2w and DT2W ?
BTW, thanks for your time and work.

ledabe974 said:
I install it right now (20140127), report after.
What kernel can we flash to have S2w and DT2W ?
BTW, thanks for your time and work.
Click to expand...
Click to collapse
Sorry I can't tell you as I am using the stock one, but bubba should work fine. I'm installing this as well, takes long to boot and optimize apps though.

Everything seems to be working very well.
I'll use it a couple of day to see if I'm not a Sense addict.

ledabe974 said:
Everything seems to be working very well.
I'll use it a couple of day to see if I'm not a Sense addict.
Click to expand...
Click to collapse
Don't forget to edit build.prop, to change density so you get most out of the screen

What's the camera quality like in this? The normal camera I find to be pretty useless compared to the sense camera.
Sent from my HTC One S using xda app-developers app

FCW said:
What's the camera quality like in this? The normal camera I find to be pretty useless compared to the sense camera.
Sent from my HTC One S using xda app-developers app
Click to expand...
Click to collapse
CyanogenMod camera always lacked features but quality is not bad, don't know about filming though. But in recent changelogs I've seen they have been working on improving in this area.

[ROM][CM12.1][OFFICIAL] CyanogenMod 12.1

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CM12.1 is here for the D801, aka the T-Mobile LG G2.
This is a source build rom, which includes all the latest changes from cm. The nightlies are starting August 3rd.
Instructions
Official support is now limited to Kitkat and Lollipop basebands. CM-12.1 is based on a completely new kernel. This has enabled support for the latest basebands newer than jellybean.
While many people and devices are in various states we officially recommend flashing back to stock then fully updating your device before using cm-12.1.
If you are coming straight from cm-12.0 the rom will not boot.
Download cm-12.1, and gapps. Put them on your sdcard, reboot to recovery. Flash, and enjoy!
The latest will be available at:
http://get.cm/?device=d801
Gapps:
Official CM ones (soon):
http://wiki.cyanogenmod.org/w/Google_Apps
Click to expand...
Click to collapse
Known Issue
None!
Click to expand...
Click to collapse
Change Log
Click to expand...
Click to collapse
Special Thanks To!
None of this would be possible without the following people:
rashed
acree
Click to expand...
Click to collapse
Source
http://github.com/CyanogenMod
Click to expand...
Click to collapse

Works great, no problems encountered yet!
Edit:
Camera not working, also tried Motorola and Google cameras without success.

My D801 is running stock Lollipop 30B rooted with TWRP. Can I just flash the ROM+GApps normally? Or would I have to install a bootstack changer?

briand.mooreg said:
Works great, no problems encountered yet!
Edit:
Camera not working, also tried Motorola and Google cameras without success.
Click to expand...
Click to collapse
Update:
Camera is working in newest nightly.

I just flashed the latest nightly from the stock lollipop lg rom. I flashed the 20g bootstack, cm, and gapps. Once the rom booted, my phone would constantly freeze and reboot every few minutes. Is anyone here having this issue. Let me know if I missed flashing a file or something. Please and thank you
Sent from my LG-F350K using Tapatalk

Mobile Data Issues
I really want to use this ROM but it's got an issue that I can't seem to fix and it makes the phone almost unusable. I switched back to KK bootstack and installed the ROM and this part went off without a hitch. ROM booted fine but I couldn't get cell data. Tried a bunch of different things until I found out that the APN setting was wrong (I'm on Tmobile). I fixed that and data worked for a bit, was even able to run a speed test. However shortly after that the phone rebooted. Then it kept rebooting, finally figured out that whenever the phone connects to LTE it automatically reboots. No warning, no nothing, just one second the phone is up the next second it's at the LG logo. If I immediately turn on airplane mode at boot it works fine. I can then turn on WiFi and then mobile connection and it works without rebooting. Also of note, when it has one of the LTE reboots, it causes it to lose the saved password of the WiFi connection. If anyone has any tips please let me know! I'm at a loss here, I can provide logcats if it would be helpful!
---------- Post added at 07:21 PM ---------- Previous post was at 07:17 PM ----------
alexnaoumi said:
I just flashed the latest nightly from the stock lollipop lg rom. I flashed the 20g bootstack, cm, and gapps. Once the rom booted, my phone would constantly freeze and reboot every few minutes. Is anyone here having this issue. Let me know if I missed flashing a file or something. Please and thank you
Sent from my LG-F350K using Tapatalk
Click to expand...
Click to collapse
Try switching on airplane mode as soon as it boots up and see if that lets it run without issues for a bit. See my previous post for more info.

Hey guys I figured it out. I had flashed the 20G bootstack and had the same issue - reboot every time connected to LTE. Not only on this ROM but every AOSP 12.1 ROM. Switching to the 30b bootstack solved the issue for me.

thanasisc4 said:
Hey guys I figured it out. I had flashed the 20G bootstack and had the same issue - reboot every time connected to LTE. Not only on this ROM but every AOSP 12.1 ROM. Switching to the 30b bootstack solved the issue for me.
Click to expand...
Click to collapse
Can confirm this is correct thanasisc! Thanks for sharing so others know. I'm honestly pretty miffed right now because some kid posted in the other development forum that you needed the kk boostack which is a bull faced lie and actually causes issues. We need to see if we can get mods to delete that post so more people aren't led astray.

Can I get some help fixing the Mobile Data issue with cm12.1? I flashed a nightly build from Aug. 27th and everything worked perfect until I lost my T-Mobile LTE-4G-3G-Edge-whatever.
Also is it recommended to run a nightly build for a daily driver? Because I ordered a G2 strictly for stock android 5.1

does slimport work on this rom

What is the recovery.img that cm is providing? Should I install that first? I have never seen cm provide recoveries before.

Unofficial CM-12.1 update w/ Snap
Anyone interested in downloading a "newer than November" build of CM-12.1 for the G2, please visit the following page:
http://forum.xda-developers.com/showpost.php?p=66071230&postcount=1458
Build has the official CM-13.0 version of Snap integrated into the ROM w/ working HDR.

[ROM][UNOFFICIAL] BLISSMALLOW [P51xx][UBER][03.08.2016]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Downloads
ROM: DOWNLOAD LINK
GApps: http://opengapps.org
Installation Instructions
Make a backup!
Download the ROM and GApps
Reboot to recovery
Wipe data/factory reset if coming from stock or another ROM
Flash the ROM and then GApps
Reboot your phone
Enjoy!
To upgrade to a newer build, simply flash the zip. There's no need for data wipe or flashing Google Apps again. (However, if you are experiencing strange issues, you may want to try a wipe.)
Credits
Bliss Team
CyanogenMod
Source device tree: Device tree
Source kernel tree:Kernel tree
ROM OS Version: 6.0.x Marshmallow
Toolchain:UBERTC 4.9
XDA:DevDB Information
Bliss, ROM for the Samsung Galaxy Tab 2
Contributors
benschhold
Source Code: https://github.com/BlissRoms
ROM OS Version: 6.0.x Marshmallow
Version Information
Status: Nightly
Created 2016-02-10
Last Updated 2016-08-03

Very nice,thank youuhh
ScreenShot

Unable to flash. Gets stuck at flashing su. Anyone else have that problem?
Sent from my Nexus 6

Shepguessed said:
Unable to flash. Gets stuck at flashing su. Anyone else have that problem?
Sent from my Nexus 6
Click to expand...
Click to collapse
Waiting 10 minets

Russiamen said:
Waiting 10 minets
Click to expand...
Click to collapse
Are you still waiting or did it finally flash?
Sent from my Nexus 6

Shepguessed said:
Are you still waiting or did it finally flash?
Sent from my Nexus 6
Click to expand...
Click to collapse
on phils recovery it installed instantly
on twrp it takes forever ??
strange but you can also reset and it it boots fine without su

Russiamen said:
Very nice,thank youuhh
ScreenShot
Click to expand...
Click to collapse
thanks for screenshots :good:

benschhold said:
thanks for screenshots :good:
Click to expand...
Click to collapse
I noticed one bug,not working auto-rotate,but when you return to the desktop,it flips,such Uc browser
P.s And it is better to use gapps from @Deltadroid,they are faster

Any chance for P5100 support?

Russiamen said:
I noticed one bug,not working auto-rotate,but when you return to the desktop,it flips,such Uc browser
P.s And it is better to use gapps from @Deltadroid,they are faster
Click to expand...
Click to collapse
for me it works, in uc browser i had to select "Auto" in orientation settings

Uri0550 said:
Any chance for P5100 support?
Click to expand...
Click to collapse
if enough people want it i consider it

benschhold said:
for me it works, in uc browser i had to select "Auto" in orientation settings
Click to expand...
Click to collapse
Possibly make last 5.1 version?

benschhold said:
if enough people want it i consider it
Click to expand...
Click to collapse
I would Love to give it a try on my P5100. :angel:

Hi Ben,
Speaking of devices, is this ROM intended for the P5110 only (will it work on the P5113 as well)?
I realize that you did not specify P511X in the post title, so I thought I would ask (before flashing myself into another bootloop).
Thanks.

benschhold said:
if enough people want it i consider it
Click to expand...
Click to collapse
+1 for P5100

mentat said:
Hi Ben,
Speaking of devices, is this ROM intended for the P5110 only (will it work on the P5113 as well)?
I realize that you did not specify P511X in the post title, so I thought I would ask (before flashing myself into another bootloop).
Thanks.
Click to expand...
Click to collapse
Cyanogen documentation says it should work too
let me know so i can update title

It works on my 5113. Never could get it to flash with TWRP, changed to PhilZ recovery and it flashed without a hitch.
But how come the Cast Screen feature doesn't work on any lollipop or Marshmallow ROM I've tried?

+1 Please, give this ROM for our P5100.

benschhold said:
Cyanogen documentation says it should work too
let me know so i can update title
Click to expand...
Click to collapse
I successfully flashed Bliss and Delta Gapps on my P5113 using TWRP 2.8.7.2 (following full wipe/format) without any issues or unusual delays.
As I'm new to both Bliss and Marshmallow, I've got lots of new functions and features to learn/test and will report any issues/questions here.
I would like to thank you for sharing this amazing new ROM with us (long live the Galaxy Tab 2)!
Thanks.

for all who have a 5100 device im uploading a build right now
also title updated cause of reports of successfully installed on p5113