AOSP/Code Aurora Vanilla Android 4.4.2 for Moto G
This build is based on sources directly from Code Aurora which is AOSP plus all Qualcomm specific enhancements and optimization.
Build instructions can be found here: https://github.com/razrqcom-dev-team/android_local_razrqcom/tree/aosp-caf-8226
Device tree is here https://github.com/dhacker29/android_device_motorola_falcon
This build has been optimized to be a one build for all variants (xt1032, xt1033, xt1034 and cdma as well should work).
I accomplished this through a little magic in the init.mmi.rc to set ro.hw.radio based on the ro.boot.radio value, from there I use init.mmi.radio.sh to set the appropriate build.prop values based on the radio detected to be stock for the device.
Known Issues: Canera does not work
Download: Latest Downloads HERE
Gapps: http://d-h.st/eWW
ClockWork Mod Recovery for 4.4 bootloader: CWM6046-MotoG44.img
TWRP 2.6.3.1 for 4.4 bootloader: TWRP2631_MotoG44.img Touch is fixed for the most part but occasional reset to main screen. I am working with Dees Troy to get a fix.
xt1033 needs the 4.4.2 modem to work with this rom
Recovery flashable 4.4.2 modem: MotoG_4.4.2_modem.zip
If you wish to return to stock via back up and not fastboot here is a flashable 4.3 radio for xt1033
Recovery flashable 4.3 modem for xt1033 MotoG_4.3_xt1033_modem.zip
Remember this is a AOSP stock android build so if you want root you need to flash the Super{User/SU} of your choice.
Also, There is no gapps backup script so they need to be reflashed with each update.
Click to expand...
Click to collapse
Changelog:
1-25-14: Fixed dialer force close
Added custom audio routing
Fixed in call audio
Click to expand...
Click to collapse
Enjoy!
Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thank you will try this, this weekend. You're doing great work for the moto G?
Witty witticisms
Hi I just tried flashing this on my xt1032 and CWM hung during the install, I left it for about 10 mins before forcing a reboot.
On another note I would like to say thanks for all the work you are putting into this phone
Sent from my XT1032 using xda app-developers app
That's odd I've not had any error flashing. Which cwm?
Sent from my Moto G using xda app-developers app
Your 6.0.4.6 build, I have also had this problem when trying to flash slimkat and gummy
Sent from my XT1032 using xda app-developers app
Same in here, on the latest CWM 6.0.4.6 from a1pha.
Me too. CWM6.0.4.6
Sent from my XT1032 using XDA Premium 4 mobile app
flashed ok for my on CWM6.0.4.6
I just tried flashing again and it worked. It took almost 9 mins to flash ( I did time it this time lol, but it seemed much longer). It did look like CWM had hung but then without the blue bar going up it came up with install finished.
So be patient people and sorry for the false alarm.
Sent from my Moto G using xda app-developers app
---------- Post added at 02:55 PM ---------- Previous post was at 02:53 PM ----------
debaj said:
Same in here, on the latest CWM 6.0.4.6 from a1pha.
Click to expand...
Click to collapse
Cwm 6.0.4.6 is built by dhacker29 a1pha created the first cwm 6.0.4.5 and his since removed his build and linked dhacker29's build
Sent from my Moto G using xda app-developers app
Thanks the clarification, sometime today I'll try it again.
Kind of laggy, but that's alpha after all
No signal in dual sim, FC in com.android.phone when accessing mobile network. Sim Toolkits FC too.
Logcat radio attached
busquet said:
Kind of laggy, FC in com.android.phone when accessing mobile network
Click to expand...
Click to collapse
Same problem with my xt1032
Sent from my Nexus 7 using xda app-developers app
Could this sources be used to build aosp-based roms?
@dhacker29 can you share what caf branch and manifest you used?
and thanks for all the great roms, hopefully i get my hands on a unreleased rom source so i can contribute too
Build instructions added to OP
Every thing is laggy to you guys.......... I don't know why I waste my time.
Thank you for this! I've been waiting for a pure AOSP build!
dhacker29 said:
Every thing is laggy to you guys.......... I don't know why I waste my time.
Click to expand...
Click to collapse
sorry, man, didn't mean that, just stating some stuff about the rom! I admire your effort in making these builds for us, and it's amazing you are getting them to work in every Moto G version!
I wish I could understand a bit more of building Android and all, I'm really looking forward to this. I'll try to do my best to test and learn how to cooperate with you, guys!
Enviado de meu XT1033 usando Tapatalk
busquet said:
sorry, man, didn't mean that, just stating some stuff about the rom! I admire your effort in making these builds for us, and it's amazing you are getting them to work in every Moto G version!
I wish I could understand a bit more of building Android and all, I'm really looking forward to this. I'll try to do my best to test and learn how to cooperate with you, guys!
Enviado de meu XT1033 usando Tapatalk
Click to expand...
Click to collapse
No worries I guess I am to micro focused on getting things to work I don't use games and audio I am busy compiling lol so I don't notice any lag. I fixed the phone force close and audio should be straight new builds in a few.
New build up fixed the phone fc and in call audio. Still only one sim working on dual sim versions for now.
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AOSPA PARANOID ANDROID
4.3 JLS36I android-4.3_r3.1
1. DOWNLOAD YOUR ROM
---------------
D800 DOWNLOAD LINK
Oct.29 MD5 - 957445dc2de58d6e492ef43eb4b15893
D803 DOWNLOAD LINK
2. DOWNLOAD THE LATEST PA 4.3 GAPPS PACKAGE
http://download.paranoidandroid.co/Developers/TLKruzze/gapps/
http://goo.im/devs/paranoidandroid/roms/gapps
3. FACTORY RESET
If you are already on PA 4.3 you can skip this step.
4. FLASH ROM & GAPPS
5. RUN INITIAL SETUP & REBOOT
Let boot take as much time as needed. This will help avoid boot issues.
GIT
GERRIT
FAQ + HELP
BUG TRACKER
COMMUNITY + CHANGELOGS
DONATIONS,
to molesarecoming
to D4rKn3sSyS
to jaybob413
to aaronpoweruser
CREDITS,
AOSP/Google, Cyanogenmod, Goo, XDA, Krebsmilk, giannisgx89, Liquid,
AOKP, our users, supporters and donators, everyone who's helped us in the past,
heartfelt thanks to all of you!
Huge thanks,
IOMonster
slick_rick
ayysir
BANNERS,
LINKS,
Website & Changlelogs: https://plus.google.com/b/107979589566958860409/107979589566958860409/posts
Github: www.github.com/paranoidandroid
Gerrit: review.paranoid-rom.com
this will me mine too
This Thread will be reserved for only the official releases.. I will be doing my own personal release with custom kernel and added features that are not included in official pa releases..
my personal pa releases will have
DarkUI (darkPA)
custom kernel
added features picked from other sources that I think are cool
.. and more info later
You can find my personal releases HERE IN THIS THREAD for other aosp and custom built roms from source for d800/801/802/803
I think it's pretty useless building 2 roms when they are both exactly the same except for the kernel.. I also provide a flashable kernel for your variant.. I will see how it all goes and decide what to do from here on.
I made it alittle different from CM for now. the device will be called LG-G2 not LG-D800 or LG-D803 .. I did it this way so that any d803 or d800 can flash each other's rom.. the only thing is u have to replace the boot.img of your carrier before flashing..
more news to come. thanks and enjoy
Downloading, thanks!
Sent from my LG-D800 using Tapatalk
Very nice.
Works flawlessly.
Sent from my LG G2 using XDA Premium 4 mobile app
ManOnTheMoon said:
Works flawlessly.
Sent from my LG G2 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
you can try my personal build with darkUI and Active Display
download here http://downloads.codefi.re/houstonn/g2_h/darkPA or visit this thread http://forum.xda-developers.com/showthread.php?t=2502789
houstonn said:
you can try my personal build with darkUI and Active Display
download here http://downloads.codefi.re/houstonn/g2_h/darkPA or visit this thread http://forum.xda-developers.com/showthread.php?t=2502789
Click to expand...
Click to collapse
Tried both of these..clean wipes of course, and they work perfect just like all of your roms on the E970..keep up the good work!
I liked this rom a lot, but how can we get knock off to work? I know on CM you install nova, would that be the same with this or does that mess up the launcher that's on there? sorry new to this stuff.
houstonn said:
you can try my personal build with darkUI and Active Display
download here http://downloads.codefi.re/houstonn/g2_h/darkPA or visit this thread http://forum.xda-developers.com/showthread.php?t=2502789
Click to expand...
Click to collapse
Working perfect so far here!
One thing that is bothering me and this may just be a change in a newer Play Store or something, but there is no "My Apps" under the menu any more in the Play store, you have to click on the top left store icon to get to My Apps. Can anyone report back if this has been the case in other roms with newest GAPPS or is this Rom/This Rom specific?
one thing I just noticed is the play store won't always connect
I keep getting bootloops
wiped cache,dalvik,system, data
flashed rom, gapps
boot,boot,boot,boot,boot
checked DL's
redownloaded
got same result
Am I just an idiot and cant get it to work or what?
(Latest CM works fine)
orvon.freeman said:
I keep getting bootloops
wiped cache,dalvik,system, data
flashed rom, gapps
boot,boot,boot,boot,boot
checked DL's
redownloaded
got same result
Am I just an idiot and cant get it to work or what?
(Latest CM works fine)
Click to expand...
Click to collapse
I'm running into the same bootloops. It will begin to run the initial setup then reboot during the "just a sec" screen.
What recovery is best to use? I'm using CWM on the d800
Sent from my LG-D800 using Tapatalk
BeGrateful said:
I'm running into the same bootloops. It will begin to run the initial setup then reboot during the "just a sec" screen.
What recovery is best to use? I'm using CWM on the d800
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
that is what I am using, went back to CM until the issue is ironed out. Maybe others can share what recovery and there process and we can see what happened.
orvon.freeman said:
that is what I am using, went back to CM until the issue is ironed out. Maybe others can share what recovery and there process and we can see what happened.
Click to expand...
Click to collapse
Here in a bit I'll try it using TWRP and see if my outcome changes
Sent from my LG-D800 using Tapatalk
BeGrateful said:
Here in a bit I'll try it using TWRP and see if my outcome changes
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
if you get something positive let us know :good:
orvon.freeman said:
that is what I am using, went back to CM until the issue is ironed out. Maybe others can share what recovery and there process and we can see what happened.
Click to expand...
Click to collapse
Sounds like a CWM issue maybe, no issues with TWRP here.
crawlgsx said:
Sounds like a CWM issue maybe, no issues with TWRP here.
Click to expand...
Click to collapse
thank you I will flash Twrp and report back
---------- Post added at 02:59 PM ---------- Previous post was at 02:34 PM ----------
After flashing TWRP PA flashed fine and is working great fast and smooth @houstonn you may want to put this in the OP :good:
Where is the T-Mobile luv? Me want some PA! LoL
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks to Slim team for Slimkat.
While SlimKAT/SlimSaber builds do work flashing over each other they usually work better with a clean install...
SlimSaber Builds:
SlimSaber Build 8.9
https://drive.google.com/file/d/0B4k5OpXTXcS9UHh4SGxFZUd1cnM/view?usp=sharing
Please backup Novalauncher before installing this build. Novalauncher will be deleted. However SlimLauncher hasnt been added yet (missed the add launcher commit before build.
SlimSaber Build 8.0
https://drive.google.com/file/d/0B4k5OpXTXcS9ZUtfZGRsdFcwVE0/edit?usp=sharing
SlimKAT builds
Build 8.8
https://drive.google.com/file/d/0B4k5OpXTXcS9TUlva0wyTVQwZ1k/view?usp=sharing
Please backup Novalauncher before installing this build. This comes with SlimLauncher by default and I believe it will delete Novalauncher.
Build 8.6
https://drive.google.com/file/d/0B4k5OpXTXcS9aS1xdVZLcEU1VVE/view?usp=sharing
with Casting Fix
Build 7.8
https://drive.google.com/file/d/0B4k5OpXTXcS9WWZOQ0VRMGFwWlU/edit?usp=sharing
(Includes use home button to answer phone calls (If option "Incoming call in background" is disabled.)
Build 7.6
https://drive.google.com/file/d/0B4k5OpXTXcS9d1J4a0pGc1lEY2M/edit?usp=sharing
Build 7.2.1
https://drive.google.com/file/d/0B4k5OpXTXcS9aE9KeUlRRVB0TFk/edit?usp=sharing
Now with working Charging While OFF animations... for all you people who charge your phone while off... you know who you are :cyclops:
Slim Changelog:
http://www.slimroms.net/
Make sure you are on latest CWM recovery!!!!!!
[ROM][SlimKat][4.4] Alpha [unofficial]
oh good.thank you
Sent from my iPhone using Tapatalk
Works perfect. Only thing is the Matrix sound but its cm11 :/
Gesendet von meinem GT-I9305 mit Tapatalk
great n congrats...
u're consistent.
Sent from my GT-I9305 using xda app-developer app
Yeah infrag! Thank you for this. Testing Time
send from out of space
Build 1.6 link in first post
Also in case you dont know slimroms.net has the latest Gapps as well for 1.6. In the section downloads/addons for 4.4
Nice ROM. One question and issue. What kernel are people running on this? I ask because my only criticism it's that the screen Calibration is way way out. The sharpening is over the top. If I am not mistaken you can change that with kernel. Correct? I am a photographer so a good screen is really important to me. Cheers in advance.
Sent from my GT-I9305 using Tapatalk
Does it have the error where whatsapp and titanium backup doesn't work?
Sent from my GT-I9305 using Tapatalk 2
JohnBonchie said:
Does it have the error where whatsapp and titanium backup doesn't work?
Sent from my GT-I9305 using Tapatalk 2
Click to expand...
Click to collapse
well I cant comment on whatsapp because I dont use it... but titanium backup seems to work fine for me... Can anyone else confirm/deny?
oias.heeda said:
Nice ROM. One question and issue. What kernel are people running on this? I ask because my only criticism it's that the screen Calibration is way way out. The sharpening is over the top. If I am not mistaken you can change that with kernel. Correct? I am a photographer so a good screen is really important to me. Cheers in advance.
Sent from my GT-I9305 using Tapatalk
Click to expand...
Click to collapse
I run the default kernel. I dont know of any kernels available for our device for KK4.4 or 4.2-4.3 for that matter that allows screen calibration. The only kernel I know of that allowed for full customization was Perseus kernel but that was only for the official Samsung 4.1 rom... not 4.2 or 4.3 or 4.4. Your only hope maybe AGNI kernel or yank555 but I dont think either of them allow this option...
There is no Kernel available at the Moment. I think that Yank will give us one, when Time is right.
Btw: Screen is fine for me. Also Battery, getting 0.6%/h in DeepSleep, running it with Sync and wifi all time. Really nice Job
send from out of space
anyone confirm it's fine at all to using ART? no FCs??
Sent from my GT-I9305 using xda app-developer app
Any colleague may help how to change the DPI value in new beta version on 28-Nov-2013?
Many thanks.
ChaniaB said:
There is no Kernel available at the Moment. I think that Yank will give us one, when Time is right.
Btw: Screen is fine for me. Also Battery, getting 0.6%/h in DeepSleep, running it with Sync and wifi all time. Really nice Job
send from out of space
Click to expand...
Click to collapse
Yank uses Aroma installer, and with the new modified TWRP it doesn't work. If there are no issues with CWM maybe that will work. ? I hope there soon will be an official TWRP for kitkat for i9305.
Adam Hui said:
anyone confirm it's fine at all to using ART? no FCs??
Sent from my GT-I9305 using xda app-developer app
Click to expand...
Click to collapse
I havent tried with Slim Gapps but can confirm it works fine with PA gapps full package.
infrag said:
I havent tried with Slim Gapps but can confirm it works fine with PA gapps full package.
Click to expand...
Click to collapse
About PA Gapps, where can i find ?
zmuda, please, and it's no offense, but can you please read the Threads and Opening Posts? All across the i9305-Section I read your Questions and the Answers are still there.
Link to PA Gapps are in Omni-Rom-OP f.ex. or just google it.
send from out of space
ChaniaB said:
zmuda, please, and it's no offense, but can you please read the Threads and Opening Posts? All across the i9305-Section I read your Questions and the Answers are still there.
Link to PA Gapps are in Omni-Rom-OP f.ex. or just google it.
send from out of space
Click to expand...
Click to collapse
Sorry, on the first post i read:
"Not all gapps packages right now are working. Please be careful when testing"
This is why I asked the question.
No Network operator
Hi, I cannot find any network operator with this ROM, I am on EE UK but get no service, are there any settings I can change ???
Thanks
markcoopz said:
Hi, I cannot find any network operator with this ROM, I am on EE UK but get no service, are there any settings I can change ???
Thanks
Click to expand...
Click to collapse
Hmm.. I've got the same with all 4.4 ROMS.
I haven't checked it, but I "smell" sthg wrong with RADIO.
If U find "unknown" radio as well, it might be a problem with missing radio firmware. Maybe we should flash RADIO instead of the 4.4 ROM?
The A2EPT Presents
CYANFOX
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After weeks of porting this from the Galaxy S2..We finally got this unique ROM to work with the help from another rom in the Miui forums.
About:
CyanFox is a brand new custom aftermarket Android firmware (ROM) which is based on CyanogenMod 11.0 and Android 4.4.2 (AOSP) source bases with some new essential features added in.
We’re supporting a majority of the most popular devices. You can always check our downloads page to make sure that your device is included on our list.
Cyanfox teams target is to keep smoothness, usability and stability
while developing this ROM. So, you can be sure that CyanFox will
be your best Android daily driver.
Attention!CyanFox and it’s team (Or me) hold no responsibility to
any damage caused to your phone, loss of earnings as a result of damaging your phone or anything else that is
connected to the development of this ROM.
Working on:
HD Recording fixed!
Adding the (Possible?) HDMI Fix
You tell me..
Installation:
Use a system 3-6 unless you want to FXZ
Use at least 500mb on each partition
Go to the system you activated and flash CyanFox
Flash Gapps
JBX is compatible
ROM:
http://www.mediafire.com/?y50ulzot26i97a2
WIFI TETHER FIX:
http://www.mediafire.com/download/3b5bz2zg2q12rg9/Wifi-tether-fix.zip
GAPPS:
http://www.mediafire.com/download/2dza8o0bcsw3ip1/12-14_GApps_Core_4.4.2_signed.zip
More about CyanFox:http://www.cyanfox-rom.com/about/
Credits:
CyanFox Team for this awesome rom
alteredlikeness for your kexec kernel
The Galaxy S2 for having this rom
The help from a ME865 rom for having the missing pieces to complete this rom.
And my team for helping me out
Follow me on Google+ to keep up with future ports.
https://plus.google.com/app/basic/107881386077920314095?hl=en&tab=wX&source=apppromo
Reserved
Downloading now.. Just hope we'll get HDMI working one day..
Sent from my MB865 using XDA Premium 4 mobile app
Great.. Another new ROM added for our beast atrix2...Thank you all devs...
Sent from my MB865 using XDA Premium 4 mobile app
nikhJ said:
Downloading now.. Just hope we'll get HDMI working one day..
Sent from my MB865 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Theres been reports of HDMI working in the latest jbx kernel. Once we get confimation that its working then ill add it :good:
Nice going porting team!!
Sent from my MB865 using Tapatalk 2
SO if I FXZ (back to ICS?) - this can be installed on system one???
JimiGEE said:
SO if I FXZ (back to ICS?) - this can be installed on system one???
Click to expand...
Click to collapse
No. What i meant was if u install this on system 1 or 2 u will lose bmm
atrix2man said:
No. What i meant was if u install this on system 1 or 2 u will lose bmm
Click to expand...
Click to collapse
Oh ok...resulting us in having to FXZ to start all over. Makes sense
atrix2man said:
Reserved
Click to expand...
Click to collapse
This is his prized rom that had unlocked the doors for us to port more roms. I'm extremely glad you managed to get this working with all of your hard work and now it's here for all of us to enjoy.
Sent from the Ace's MB865 using Tapatalk
any issues on this rom?
Sent from my ME865 using xda app-developers app
uwanfodawin said:
any issues on this rom?
Sent from my ME865 using xda app-developers app
Click to expand...
Click to collapse
Everything works as far as i know. Bluetooth and gps hasnt been tested if you want to test for me?
CAmera not working for me
elafanto said:
CAmera not working for me
Click to expand...
Click to collapse
What kernel are u using? I had this issue with jbx.
atrix2man said:
What kernel are u using? I had this issue with jbx.
Click to expand...
Click to collapse
Try today's release of jbx.
Keep in mind that latest jbx needs a Rom with full hd cam support.
Edit: what's that hdmi fix you're talking about in the op?
Gesendet von meinem XT910 mit Tapatalk 4
dtrail1 said:
Try today's release of jbx.
Keep in mind that latest jbx needs a Rom with full hd cam support.
Edit: what's that hdmi fix you're talking about in the op?
Gesendet von meinem XT910 mit Tapatalk 4
Click to expand...
Click to collapse
i gotcha. altered said that hdmi might of got fixed with your latest jbx kernel. Im not sure though because i cant use that feature. It was a discussion we had on hangouts.
Camera force closes on fresh install and with jbx. Also had some issues with getting hot reboots(shows cyanfox loading screen) randomly. Also MMS wasn't working for me with correct APN settings. Tried doing a logcat but logcat says some error about not being able to read something.
Sent from my MB865 using Tapatalk
justin654 said:
Camera force closes on fresh install and with jbx. Also had some issues with getting hot reboots(shows cyanfox loading screen) randomly. Also MMS wasn't working for me with correct APN settings. Tried doing a logcat but logcat says some error about not being able to read something.
Sent from my MB865 using Tapatalk
Click to expand...
Click to collapse
One of the jbx kernels causes reboots and camera force closes..camera will fc with jbx until i add the hd recording fix so be careful which one u pick. Mms works for me.
its raining kitkat for edison
screenshots please...just want to know what makes it different from other 4.4.2 roms...??? :silly:
P.S.- job well done on porting another 4.4.2 rom...the more the merrier... :good: :laugh:
MMS
justin654 said:
Camera force closes on fresh install and with jbx. Also had some issues with getting hot reboots(shows cyanfox loading screen) randomly. Also MMS wasn't working for me with correct APN settings. Tried doing a logcat but logcat says some error about not being able to read something.
Sent from my MB865 using Tapatalk
Click to expand...
Click to collapse
I'm having issues with MMS as well. Was working but all of sudden stopped. Any advice?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DISCLAIMER: This is a CUSTOM ROM! Use at YOUR OWN RISK!!! By using this ROM, you understand that I am not liable for any or all consequences of using this ROM. If you don't know what you're doing, DON'T TRY IT. Use at your own risk!
Click to expand...
Click to collapse
Install Instructions :
Wipe Factory
Format System
Install from Zip
Reboot
What's Working :
Everything I Can Think Of
Newest Download ===> Here
G-apps ===> Here
XDA:DevDB Information
(Team Osiris) Unofficial CM11 for XT1031 (BoostMobile), a ROM for the Moto G
Contributors
tattooedgod, dhacker29, jetx2x
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: XT1031
Based On: CyanogenMod
Version Information
Status: Stable
Current Stable Version: 20140122
Stable Release Date: 2014-01-22
Current Beta Version: 20140121
Beta Release Date: 2014-01-21
Created 2014-01-22
Last Updated 2014-02-08
sources?
Doublepranks said:
sources?
Click to expand...
Click to collapse
on download page, got them up now
got a quick question for ya...
I've run 2 or 3 different ROMS on this phone already (BoostMobile version).
they've all installed correctly & worked as described in their respective threads.
the only mod I couldn't get to work on stock was the Faux kernel
(although it did work on the other ROMs).
what are the differences in ROMs (other than GSM vs. CDMA)
ie.: 1031-1034 ?
Thanks
I actually activated this w/ RingPlus as a spare phone, been working great.
Not much besides connection gsm/CDMA most or all of hardware is same.
Sent from my XT1031 using Tapatalk
Seems to run smooth, just installed and am currently testing on a Boost Mobile Moto G. I will report back with any issues. Thank you!
EDIT: DSP Manager crashing while using Google Music. I had this issue on the Paranoid Android rom as well.
thetechwookie said:
Seems to run smooth, just installed and am currently testing on a Boost Mobile Moto G. I will report back with any issues. Thank you!
EDIT: DSP Manager crashing while using Google Music. I had this issue on the Paranoid Android rom as well.
Click to expand...
Click to collapse
Thank you for reply I will look into it to see what can be done thank you
tattooedgod said:
Not much besides connection gsm/CDMA most or all of hardware is same.
Click to expand...
Click to collapse
thanks, was just wondering why everyone was putting phone version in ROMs when hardware is same (except for dual sim obviously). they all seem to work on my phone (so far ).
Sent from my Transformer Prime TF201 using Tapatalk
kr338r said:
thanks, was just wondering why everyone was putting phone version in ROMs when hardware is same (except for dual sim obviously). they all seem to work on my phone (so far ).
Sent from my Transformer Prime TF201 using Tapatalk
Click to expand...
Click to collapse
yeah It's just the different networks mine only work without modification on BoostMobile.
Can you post some screenies pls
Sent from my XT1032 using xda app-developers app
There are some but I used xda new format if you look on the web browser version you'll see where the screen shots are
Sent from my XT1031 using Tapatalk
Can someone post the stock build.prop for this model so I can incorporate it into the unified builds?
Just had a random reboot sitting in class. Been running stable for the past 2 days.
dhacker29 said:
Can someone post the stock build.prop for this model so I can incorporate it into the unified builds?
Click to expand...
Click to collapse
wasn't ignoring you dhacker I had a crash and had to reinstall linux and so forth I will get that to you soon so can unified the builds, by the way is your local manifest updated on razcom github keep trying your tree for no caf builds besides caf-new and fm, couldn't get to build still are there some patches I'm missing or tool missing I should be using.Thanks ahead.
Hmm, anyone have any idea how to solve this problem?
First of all I started with stock rooted 4.4.
I booted to recovery (CWM) and factory reset, wiped cache, formatted system, data and cache and wiped Dalvik. Installed CM11, installed GAPPS and rebooted. Did this a couple times and I keep getting stuck on the cyanogenmod boot logo. Any ideas?
Roguefoxx said:
Hmm, anyone have any idea how to solve this problem?
First of all I started with stock rooted 4.4.
I booted to recovery (CWM) and factory reset, wiped cache, formatted system, data and cache and wiped Dalvik. Installed CM11, installed GAPPS and rebooted. Did this a couple times and I keep getting stuck on the cyanogenmod boot logo. Any ideas?
Click to expand...
Click to collapse
First boot can take a while, just give it some time it should boot up once it gets done creating the dalvik-cache for apps in the system...
I let it sit for at least a half hour and it was still stuck on the boot logo.
Can anyone confirm/deny MMS working on this ROM?
Stryeguy said:
Can anyone confirm/deny MMS working on this ROM?
Click to expand...
Click to collapse
I don't have the device but of you flash the official nightly and post the output of
and logcat -b radio
While trying to send an MMS we can fix it
Sent from my DROID RAZR HD using Tapatalk
will it work on dual sim version xt1033 ?
Validus Lollipop 8.0
SM-T310
[lt01wifi] ONLY!!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Welcome to the OFFICIAL thread of Validus Lollipop for the SM T310 better known as lt01wifi, Build's are usually updated on a weekly or wheneverwefeellikely basis. I am NOT the Developer of this ROM, I am just a graphics guy on Team Ground Zero. All credit goes to Team Ground Zero and all our hardworking Devs. Team Ground Zero is built upon the willingness to learn, create and socialize on Android. Creators of Validus, a custom AOSP ROM with many features created in house as well as pulled from CyanogenMod, SlimROMs, Paranoid Android and others. Members are also dev/maintainers for other popular ROMs. Enjoy your stay! Also, unofficial builds from source will not be supported. You assume all responsibility for anything that may happen and Team Validus cannot and will not be held responsible for anything that may happen to your device as a result of flashing a rom.
*FLASH AT YOUR OWN RISK*
NOT WORKING:
-Netflix
-HBO
-Stock CM camera
(Please install your favourite 3rd party camera app)
I use this one - https://www.dropbox.com/s/0plljcutwn02lq7/CameraNext.apk?dl=0
It takes Very Nice pictures (for a tablet camera)...Video is choppy similar to the cm12 build.
-You tell us
Official:
https://www.androidfilehost.com/?fid=24052804347756771
06/04/15
-DPI is set to 222 Going any lower may cause rotation FC.... IF YOU WANT A SMALLER KEYBOARD INSTALL TBO SUPER SWIFTKEY.
-YOU MUST INSTALL A THIRD PARTY CAMERA ON THIS BUILD... VIDEO CAM AND FRONT CAM WORK FOR SKYPE ETC... BUT VIDEO RECORDING IS VERY CHOPPY... DO NOT TRY THE CM CAMERA AS YOUR TABLET WILL JUST REBOOT.
BaNKs Gapps 5.1.x (06/13/15)
http://fitsnugly.euroskank.com/?rom=banks&device=gapps
Make sure you have the latest TWRP or Philz Recovery for the SM t310 [lt01wifi] (I prefer Philz as TWRP 2.8.3.0 gave me some backup issues)
Wipe data/Factory Reset
Flash Validus
Flash Gapps (I prefer BaNKs gapps)
Reboot...
Enjoy!
Here's a good place to start for CM12 themes. https://plus.google.com/u/0/communities/112270486113315228704
****Please Undertand that the CM12 Theme Engine is in its early stages and some things may not work or function as they should. Use at your own risk and don't complain about themes in this thread. Using any part of the theme engine may cause System Ui FC. Our Team has worked really hard to theme this ROM the way we like it....The CM team has to get their theme engine bugs worked out, we are just happy to have it in there to play around with for now.....
[email protected]
https://github.com/gr8nole/
https://github.com/Team-Validus/android
COME JOIN OUR GROWING GOOGLE + COMMUNITY:
https://plus.google.com/u/0/communities/109330559573276360638
First reply?
Awesome will check it out
screens...
With Green Theme.???
Sent from my SM-T310 using XDA Premium 4 mobile app
UPDATE
OP has been updated with a new build [01/21/15] with working video and bluetooth....Check it out!!
Thanks again to Gr8nole for the quick fixes!!
Damnit, Jon.....I just got cm12 set up!!!!???
Sent from my SM-T310 using XDA Premium 4 mobile app
Downloading. They are great. Thank You.
Keyboard
We can now change keyboard, you could not before.
Naruto37 said:
We can now change keyboard, you could not before.
Click to expand...
Click to collapse
You mean from the built in choices or 3rd party? I could change the built in ones on the first build too..
Ariesdroid said:
You mean from the built in choices or 3rd party? I could change the built in ones on the first build too..
Click to expand...
Click to collapse
In the previous version could not change SwiftKey, in this versión Yes.
---------- Post added at 05:50 PM ---------- Previous post was at 05:37 PM ----------
I could not in options, neither could with their own app SwiftKey, in this construction I can Yes. Sorry for my English.
Sir,
Would you please make this excellent rom for our T311, so that we also can taste android L on our T311?
Sent from my SM-N900 using XDA Premium 4 mobile app
Micheal86 said:
Sir,
Would you please make this excellent rom for our T311, so that we also can taste android L on our T311?
Sent from my SM-N900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Sorry, but no one on our team has the 311...We only build for devices we own and can test....I am just a graphics guy on the team...I don't build ROMs....The only reason the 310 gets built, is because i have one....If you can find someone that has the 311 and builds, they are more than welcome to build and maintain Validus though...
OP has been updated...new build is up with working camera,
I also recommend installing "next camera" as it works great on the t310 ...
enjoy!
wifi / data issues
I have a sm-t310 and looking to do a clean/wipe internal install.
I have loaded it up and done a wipe but i'm having connection issues.
Data comes through but no consistantly.
On wifi the play store does not work most of the time or i can't get netflix to work at all. youtube works but rarely get the info through.
I'm using pa gapps 5.0.1rc2 20150125a
and LP-v7.0-2015-01-21
and philz 6 touch recovery
pls help.
ps this is my kids tab and thought i was doing a good thing but now kid can't play....
OhCaN99 said:
I have a sm-t310 and looking to do a clean/wipe internal install.
I have loaded it up and done a wipe but i'm having connection issues.
Data comes through but no consistantly.
On wifi the play store does not work most of the time or i can't get netflix to work at all. youtube works but rarely get the info through.
I'm using pa gapps 5.0.1rc2 20150125a
and LP-v7.0-2015-01-21
and philz 6 touch recovery
pls help.
ps this is my kids tab and thought i was doing a good thing but now kid can't play....
Click to expand...
Click to collapse
Sorry you are having these issues. First of all, which tablet do you have? The Lt01wifi does not have DATA. This build is for the SM-t310 WIFI ONLY tablet. Did you create a nandroid backup of whatever you were running before flashing Validus? If you did you can simply go to recovery, wipe and restore. As for your issues you speak of, I'm kind of lost as my tablet is running great and WIFI is working as good as it ever has. If you read the thread before flashing you would of read that Netflix and HBOgo or whatever are still broken. Google movies and Youtube and pretty much everything else does work. If your WIFI isn't working properly i would check your modem at home and restart it. I use my tablet both at home and at my place of business and Wifi works great at both locations.
I also don't ever use pa gapps....I use Banks.....there is a link to the banks gapps in the OP.....The latest are 1/19/15 i believe.
You are also on a older build....the latest build with working camera etc is dated 1/26/15 .....It was just added last night....
Hi... just installed this rom and works flawlessly so far. Also new user on this roms, always used stock roms mostly. One question, is it possible to add different users to the tablet? I can't find the place, but for sure it's possible. I'll keep on digging on menu's. Thanks in advance for cooperation.
Enviado desde mi SM-T520 mediante Tapatalk
argorito said:
Hi... just installed this rom and works flawlessly so far. Also new user on this roms, always used stock roms mostly. One question, is it possible to add different users to the tablet? I can't find the place, but for sure it's possible. I'll keep on digging on menu's. Thanks in advance for cooperation.
Enviado desde mi SM-T520 mediante Tapatalk
Click to expand...
Click to collapse
You shouldn't have to dig... go to settings menu/users ...
*EDIT....sorry i was looking at validus on my phone which has it....gr8nole just added multiuser support to cm12 so the next Validus build will have it....
I don't see it mentioned in the install instructions but do we flash supersu as well?
Sent from my SM-G900V using Tapatalk
jrv331 said:
I don't see it mentioned in the install instructions but do we flash supersu as well?
Sent from my SM-G900V using Tapatalk
Click to expand...
Click to collapse
No, it's built in!
Sent from my Nexus 6 using XDA Premium 4 mobile app