[Q] Atrix 2 not booting up seems that it is dead - General Questions and Answers

please help i am in a serious trouble
at first my phone was not booting beyond the M logo
i searched the forum and tried the ReturnToStock method.
i was applying that process on my device , after 5-6 OKAY messages it stopped at a point,the statement `ECHO OFF` WAITING FOR DEVICE is displayed for long i thought something went wrong and disconnected the usb cable.
from then onwards the device is dead and not responding to anything

Related

[Q] Freelander pd10 3g bricked

hi Sir,
i have freelander pd10 3g tablet and have tried to make firmware upgrade using sp flash, and i got the green circle tells me that upgrade is completed. but the tablet never started up then, not responding at all no power up no charging no recovery mode, nothing at all, when i connect it to pc it keeps connecting and disconnecting without removing the cable.
i need your support please i heard alot about you and have seen issues that were solved by your instructions, help me please it is still new.
written on the board inside tablet yg_mg705d
it's 8 gb, 1 g ram, 2 sim cards, hdmi
waiting for you
Thank GOD
Dear All,
Since i had a problem and i tried to get these developers help without any result and they haven't responded at all, i started searching and praying to ALLAH till i got this Site : h**p://forum.etbuying.com/viewtopic.php?f=18&t=26
It solved my problem as simple as it is.//
Good luck for all:laugh:

[Completed] [Q] Bootloader is gone! - Soft bricked LG L4 II E467F

Hi everyone.
First sorry my poor english.
Yesterday I received a phone (LG L4 II E467F Dual SIM) from a customer, the unit was but connecting the loading stopped with the LG logo and stand on this screen. I tried to upgrade the PC Suite, the cell was placed in download mode and the update is performed by the software, download and recording was carried out on the device during the recording process progress was up to 94% with the power on, when he got 95% the device was turned off automatically (A device's battery was at about 70% during the process), then the process has reached 100% normally without error messages.
After this the phone turned a brick, does not care, does not vibrate, does not go into download mode, finally does nothing. But noticed that it was shown in Windows Device list without driver. I used a software to install drivers and the device driver has been installed and he was recognized as "USB Port MTK (COM5)."
I watched a few topics about it, but could not properly understand the procedure and I was afraid to end any device recovery chance.
http://forum.xda-developers.com/showthread.php?t=1943442
http://forum.xda-developers.com/showthread.php?t=2160490
http://forum.xda-developers.com/showthread.php?t=1943442&page=91
https://www.youtube.com/watch?v=TQvdJwvqKZ4
Does anyone know how I can recover the bootloader of the device?
The bootloader is my biggest concern, because if the device start and stop again with LG logo can at least return the device to the customer.
rodrigocswm said:
Hi everyone.
First sorry my poor english.
Yesterday I received a phone (LG L4 II E467F Dual SIM) from a customer, the unit was but connecting the loading stopped with the LG logo and stand on this screen. I tried to upgrade the PC Suite, the cell was placed in download mode and the update is performed by the software, download and recording was carried out on the device during the recording process progress was up to 94% with the power on, when he got 95% the device was turned off automatically (A device's battery was at about 70% during the process), then the process has reached 100% normally without error messages.
After this the phone turned a brick, does not care, does not vibrate, does not go into download mode, finally does nothing. But noticed that it was shown in Windows Device list without driver. I used a software to install drivers and the device driver has been installed and he was recognized as "USB Port MTK (COM5)."
I watched a few topics about it, but could not properly understand the procedure and I was afraid to end any device recovery chance.
http://forum.xda-developers.com/showthread.php?t=1943442
http://forum.xda-developers.com/showthread.php?t=2160490
http://forum.xda-developers.com/showthread.php?t=1943442&page=91
https://www.youtube.com/watch?v=TQvdJwvqKZ4
Does anyone know how I can recover the bootloader of the device?
The bootloader is my biggest concern, because if the device start and stop again with LG logo can at least return the device to the customer.
Click to expand...
Click to collapse
Sorry, I wrote hard brick in the title, but actually just learned the real difference between soft brick and hard brick, and my problem is soft brick
Hi, thank you for using XDA Assist. The purpose of XDA Assist is to point you in the right direction, it's not a help desk. See this, http://forum.xda-developers.com/showthread.php?t=2764768. Since your looking in the right place to get your question answered I'm going to close this thread.

[Completed] SAMSUNG TAB2 Stuck on BootLoop please Help me!!!

Hello Guys
So i recently purchased a samsung tablet (gt-n8013) it was working fine, i put it to charged came back from work and it wouldn't bootup ,it stuck at the samsung logo..I checked online (google and youtube) and it seems like a common issue with that tablet (thank you samsung), i tried almost everything, hard reset, root the tablet and nothing seems to be working. I also noticed my laptop doesn't recognized the device after i download the latest firmware from samsung,i tried different softwares like Odin or kies none of them wouldn't recognized the device, so it was impossible to root my tablet..i bought a new usb cable and tried the same steps on a different pc still nothing...Its been two weeks now still not working and i don't know what else to do, if anyone ran to the same problem and knows how to fix it ,could you kindly help me resolve this issue or point me out to the right direction PLEASE!!!..Thank you.
Hi, first, please don't make duplicate threads, http://forum.xda-developers.com/postings.php?t=3131512&pollid= We do this on our free time and sometimes it takes us awhile to respond
Your best bet is to ask for help in your device's forum here, http://forum.xda-developers.com/galaxy-note-10-1. But sometimes device's just die. Odin is your best chance to get it working again. With your device booted into download mode and connected to your pc does device manager show anything? Maybe an icon with a yellow exclamation mark.
Thread closed.

[Completed] sony xperia sp bricked and need help im at a lost end :(

Hi, I'm a noob to this site and is my last call of action ive tried everything to get my phone working but I'm at a lost end now and getting frustrated.
If anyone can help me with my problem it will be much appreciated and a lot of pressure taken off me. to start with I towel rooted my xperia sp (c5303) which gave me root. I then installed a recovery called philz which worked great. installed lollipop all fine booted up but no data signal bar had explanation mark. I tried the data fix through recovery did not work so I thought il flash my device again to see if it rectifies my problem so I deleted all data cache delvic cache chose the file off sd card that I previously used but this time I got an error. and the phone just restarted . so I assume there is nothing on my phone now no firmware as it turns on comes up with the sony logo but hangs after a minute or so my phone turns its self off. I plug my phone into pc usb and the lightbar turns green at the bottom then after 40 seconds goes red with the sony logo again then after a minute reboots to green and so on in a boot loop state. I have tried flashing my phone to stock with flashtools but it gets so far then gives error that I don't have usb debugging and unknown sources enabled. I cant have them enabled as I cant access my phone. I have gone into flash tool drivers folder downloaded flashmode drivers and fastboot and viskan board it starts to install them comes up with welcome to device driver installation . sony(winusb) says failed. Google inc (winusb) says failed sony ericsson mobile communication says failed I assume it cant see my phone. I just don't understand what to do next.
If any body has had this problem could you please shed a little light, Thanks for taking time out to read this.
Chris
chris10286 said:
Hi, I'm a noob to this site and is my last call of action ive tried everything to get my phone working but I'm at a lost end now and getting frustrated.
If anyone can help me with my problem it will be much appreciated and a lot of pressure taken off me. to start with I towel rooted my xperia sp (c5303) which gave me root. I then installed a recovery called philz which worked great. installed lollipop all fine booted up but no data signal bar had explanation mark. I tried the data fix through recovery did not work so I thought il flash my device again to see if it rectifies my problem so I deleted all data cache delvic cache chose the file off sd card that I previously used but this time I got an error. and the phone just restarted . so I assume there is nothing on my phone now no firmware as it turns on comes up with the sony logo but hangs after a minute or so my phone turns its self off. I plug my phone into pc usb and the lightbar turns green at the bottom then after 40 seconds goes red with the sony logo again then after a minute reboots to green and so on in a boot loop state. I have tried flashing my phone to stock with flashtools but it gets so far then gives error that I don't have usb debugging and unknown sources enabled. I cant have them enabled as I cant access my phone. I have gone into flash tool drivers folder downloaded flashmode drivers and fastboot and viskan board it starts to install them comes up with welcome to device driver installation . sony(winusb) says failed. Google inc (winusb) says failed sony ericsson mobile communication says failed I assume it cant see my phone. I just don't understand what to do next.
If any body has had this problem could you please shed a little light, Thanks for taking time out to read this.
Chris
Click to expand...
Click to collapse
I have fixed it myself took me a week but I unlocked bootloader from sony did a full install of own rom, works perfect now. please close thread
chris10286 said:
I have fixed it myself took me a week but I unlocked bootloader from sony did a full install of own rom, works perfect now. please close thread
Click to expand...
Click to collapse
Glad you managed to fix it yourself.
If you have further questions, feel free to ask in the help thread for the Xperia SP
http://forum.xda-developers.com/xperia-sp/help
Thread closed.

Samsung N910F "MMC READ FAILED" and then dead.

Hello everyone. I'm Saad from Rawalpindi. This is the first time i'm posting on this forum. I rooted my N910F and it worked perfectly for 7-8 months. Recently it started rebooting itself unexpectedly and going into download mode OR showing message MMC READ FAILED. . So every time i had to pull out the battery and then boot it. After 5-6 days with this problem. Now my phone NOT GETTING ON, NOT CHARGING and simply DEAD (i suppose). Is there any way i can switch it on again once and COPY few files? THANKS IN ADVANCE for anyone's help
Can you update me of it's current condition?

Categories

Resources