As those of you who own this Point of View (another chinese A 13 tablet) know, the stock 4.1 JB rom which the tablet
ships with is very slow (close to unusable if you ask me). I wonder what these chinese people actually did to the stock
rom to make it go so amazingly slow...
Here is a quick fix for those of you who would like to have a faster experience
This instructional assumes you have installed your USB drivers and have a copy of ADB.
1: BACKUP YOUR ROM (or you can find on the Point of View homepage)
2: Follow the instructions at A13 ROM JB 4.2.2 + DRIVERS and install FaaastJB v2.5 (4.2.2).
Once installed, and after first time boot, your touchscreen, camera and gsensor will NOT work. Leave the tablet on.
3: Download the attached file (TS drivers, modded script.bin and cfg files) or from this installation link.
4: Unzip the file to your ADB directory.
5. Connect your Point of View Mobii 703 via USB and execute the 'run.bat' that came with the TS modules.
6. Your tablet will reboot.
7. Congratulations! You have a fully working tablet with a much faster rom!
Working Stock P703 CWM for Faaastjb 2.5 ROM
The CWM that Faaastjb 2.5 ROM comes with is incompatible with the Point of View Mobii P703.
That is, if you reboot into recovery, you will be stuck in the dreaded CWM bootloop.
The attached file contains the CWM recovery partition image from the stock P703 JB 4.1 ROM.
This CWM works OK with the FaastJB 2.5 ROM. It does not contain as many functions as the
Faastjb CWM, but at least it works..
This instructions assumes you have installed your USB drivers and have a copy of ADB.
Instructions:
1. Your tablet must be in USB debug modus (Settings | Developer options).
2. Download and unzip the attached file to to your ADB directory.
3. Connect your Point of View Mobii 703 via USB and execute the 'run.bat' file that came with the files.
4. Follow the onscreen instructions. The recovery rom will be copied to your sdcard and flashed to the recovery nandg partition.
5. Your tablet will reboot.
If everything went well, you will have a working CWM, which makes running the Faastjb 2.5 ROM on this tablet a
more complete and safe experience.
Updated 02.01.2016. New download link added (fill in .com after megafileupload below for link to work, rules on the board..)
megafileupload/mzhY/Bluebyte9001_P703_stock_recovery.zip
first thanks for this rom but is it posible to install ics 4.0.4 on this tablet i think it would be faster if you can find img for ics and post it thanks
I have the CWM issue..
but seems the attached file you had is deleted? I need it!!
POV Mobii 703 with faaastjb and can't flash back to stock rom anymore because of clockwork issues
It seems that there is no way (with online files) to rooting a mobII p703 or are they?
My wife bought this for holidays, but the stock rom is arkward slowly. Changed the launcher with sicksky but it didnt help.
The baidu crap cant be deleted too. Thanks for any help.
Mobii 703 problem!!
My tab k.o.
ts modul run bat, and start device and only pont wiev logo.
do not going. recowery mod no.
HELP ME!!!!!! Thank.!!!
Please Help- Need the files
Hi bluebyte9001,
I also get the CWM bootloop.
But I can´t find the atteched files from your secound post.
Do you already have the files an can send them to me?
Thanks
susko25 said:
first thanks for this rom but is it posible to install ics 4.0.4 on this tablet i think it would be faster if you can find img for ics and post it thanks
Click to expand...
Click to collapse
I am sorry, but my 703 tablet is now broken (physically), so I have no way to develop more roms for this tablet.
haeuptling1977 said:
Hi bluebyte9001,
I also get the CWM bootloop.
But I can´t find the atteched files from your secound post.
Do you already have the files an can send them to me?
Thanks
Click to expand...
Click to collapse
Sorry for the late reply. I found the cwm after some searching around. See updated download link.
modnoo said:
I have the CWM issue..
but seems the attached file you had is deleted? I need it!!
POV Mobii 703 with faaastjb and can't flash back to stock rom anymore because of clockwork issues
Click to expand...
Click to collapse
Sorry for the late reply. I found the cwm after some searching around. See updated download link.
Visurox said:
It seems that there is no way (with online files) to rooting a mobII p703 or are they?
My wife bought this for holidays, but the stock rom is arkward slowly. Changed the launcher with sicksky but it didnt help.
The baidu crap cant be deleted too. Thanks for any help.
Click to expand...
Click to collapse
I am not aware of any online way to root the Mobii p7903. Did you try to flash my ROM? It is faster than the stock ROM.
links request
Hi, can you please update the links for TS drivers and CWM, or send the attached files to me?
Either way!
Related
Hey all. Here is a rooted stock ROM (firmware) with bloatware (extraneous apps) removed for the MSI Windpad Enjoy 7" and 10".
MSI Windpad Enjoy 7"
mediafire.com/?5bvurbrqtxn8qny
MSI Windpad Enjoy 10"
mediafire.com/?wrem1b1511aki36
HOWTO Install:
Download the correct file for your Windpad
Rename the file to update.img
Connect your Windpad to your computer
Enable USB storage mode
Copy the update.img to your Windpad's storage
Eject your windpad from the computer, then turn off USB storage
A popup will appear asking if you wish to install the update. Click Install.
Sit back, relax and wait for your ROM to finish installing.
NOTE: PLEASE DO NOT TOUCH THE DEVICE OR REMOVE POWER/USB WHILST THE UPDATE IS INSTALLING. DOING SO COULD RESULT IN A BRICK.
Please note: although I have tested the 10" version I have not tested the 7" version although the process to create the ROM was exactly the same as the 10". I am also in no way responsible if you stuff up the install and brick your device.
Removed Apps:
Adaptxt(d)(e)_f_And(2.3)_pro_dutnl_MSI_v1_4.apk
Adaptxt(d)(e)_f_And(2.3)_pro_enggb_MSI_1_4.apk
Adaptxt(d)(e)_f_And(2.3)_pro_engus_MSI_v1_4.apk
Adaptxt(d)(e)_f_And(2.3)_pro_freca_MSI_v1_4.apk
Adaptxt(d)(e)_f_And(2.3)_pro_frefr_MSI_v1_4.apk
Adaptxt(d)(e)_f_And(2.3)_pro_gerde_MSI_v1_4.apk
Adaptxt(d)(e)_f_And(2.3)_pro_itait_MSI_v1_4.apk
Adaptxt(d)(e)_f_And(2.3)_pro_rusru_MSI_v1_4.apk
Adaptxt(d)(e)_f_And(2.3)_pro_spaes_MSI_v1_4.apk
Adaptxt(d)(e)_f_And(2.3)_pro_spamx_MSI_v1_4.apk
Adaptxt(d)(e)_f_And(2.3)_pro_turtr_MSI_v1_4.apk
AnPrint3.1.apk
Asphalt5_MSI_N0Y1_ML_IGP_-MSI_Tnb_MP_MS_GLLive_105.apk
ASTRO_2_5_3-85-yd.apk
BooksProvider.apk
DungeonHunter_MSI_N0Y1_ML_IGP_MSI_Full_GLLive_109.apk
Explorer.apk
flashplayer
Free_HD_Games_MSI_N0Y1_Widget_EN_FVGL_TS_100.apk
Fuugo_TYR_PID101_FA130_noexpire.apk
HeroOfSparta_MSI_N0Y1_ML_IGP_MSI_Global_GLLive_100.apk
kickback.apk
PassionQuickOffice.apk
PowerDVD-PDA110613_02-2.0.2549.apk
RkApkinstaller_0710.apk
RKEBookReader.apk
signed_YouTube2.3.apk
Skype.apk
soundback.apk
SoundHound-Freemium-MSI-release.apk
Street.apk
talkback.apk
TimeSync.apk
yozooffice_1719_MSI.apk
Let me be the first to thank you for your hard work.
Good job! I will be downloading and installing this on my windpad 7.
I have a question, did you use this to modify the ROM? you did say the chip was a rockchip one. I did a research and came out with this.
http://www.slatedroid.com/topic/19808-rk29xx-imagetools-v21/
Again, many thanks
Yes! That is pretty much the steps I've followed! So you can modify your ROM in anyway you want. The links for the most up to date ROM from MSI direct are:
7": event.msi.com/nb/enjoy/enjoy7_download.html
10": event.msi.com/nb/enjoy/enjoy10_download.html
@aedwards3
would you pls send a check-sum or a program to check the .img file; my download has been stopped 3 times and I guess the file is corrupted
thanks for the image! it worked for me and the device seems much faster! =) had some issues at the start where it would loop msi logo but in the end got it working ! thanks.
krazybear said:
thanks for the image! it worked for me and the device seems much faster! =) had some issues at the start where it would loop msi logo but in the end got it working ! thanks.
Click to expand...
Click to collapse
Is your device 7 or 10?
Works well!
works well on Enjoy 10. Thank you for your job!
I have enjoy7 has anyone tested this on their 7" yet
Regards
Spyral
Using the guide and tool here: http://www.slatedroid.com/topic/19808-rk29xx-imagetools-v21/
I was also able to root my Enjoy 7. Also removed some bloatwares. Working on my enjoy 7 and using it now. aedwards3 ROM should also work.
I will be uploading the firmware in a little bit.
lact0se : i have the 10 version.
Is it a way to customize other ROMs like CyanogenMod or even Honeycomb ROMs for windpads?
Thankx all
I took a chance and flashed my 7" and now I can say this is an ENJOY 7
works great, very fast and all the sh8t is off still not 100% rooted
Lets hope we will see ICS or even honeycomb for this tab in weeks to come
again Thank you all for your hard work
Regards
Spyral
root successful
good job!
thank you for your trying.
can do any thing for Releasing Honeycomb version for windpad?
Here is my rooted firmware if anyone is interested.
http://depositfiles.com/files/v6y8wjfy2
This is tested working on ENJOY 7.
ENJOY!!!
Sorry guys if the root isn't working properly on the 7" (I don't own one to test but I did use the same method for the 10" - maybe I missed a step) but I think lact0se has a working root version for that one now - Thanks lact0se!!!
Here is a checksum for the files if anyone needs them (using fciv):
7: aaac28a4fe6fa07ee031cb4aa80a5588
10: 2bdaa80793a8559e8004b83df1b493c5
any idea to use other custom roms?
lact0se said:
Here is my rooted firmware if anyone is interested.
This is tested working on ENJOY 7.
ENJOY!!!
Click to expand...
Click to collapse
Please upload to faster site, download will take almost 4hours
Thankx
anybody knows how to remove NAND lock from our devices? i.e to rewrite new fonts or something like that in \system folder
Is there an identical tablet from a chinese manufacturer like visture or cube etc who is actually putting out firmware updates?
Good to see some action finally happening on this tablet!
rooting process, step by step
lact0se said:
Using the guide and tool here: http://www.slatedroid.com/topic/19808-rk29xx-imagetools-v21/
I was also able to root my Enjoy 7. Also removed some bloatwares. Working on my enjoy 7 and using it now. aedwards3 ROM should also work.
I will be uploading the firmware in a little bit.
Click to expand...
Click to collapse
aedwards3 said:
Yes! That is pretty much the steps I've followed! So you can modify your ROM in anyway you want. The links for the most up to date ROM from MSI direct are:
7": event.msi.com/nb/enjoy/enjoy7_download.html
10": event.msi.com/nb/enjoy/enjoy10_download.html
Click to expand...
Click to collapse
would you pls explain the steps you've done to root the official ROM, thank you in advance
Here is a custom ROM for the Pro 2 if anyone still interested in it!
KEEP IN MIND EVERYTHING THAT YOU DO IS AT YOUR OWN RISK I'M NOT RESPONSIBLE FOR ANY DAMAGE TO YOUR DEVICE.
ONLY FOR THE QWARE PRO 2!!!
- Based Yarvik 250
- ADW Launcher installed
- Lock screen in landscape mode now
- Much faster
- Statusbar icons and smaller
Enjoy!
Download V1
Download link: http://www.mediafire.com/?8hj5xqe4j6vpe5z
CWM Recovery: http://www.mediafire.com/?fx1vx993lg1lxkv
Download V2
Download link: http://www.mediafire.com/?fxycl487amxbcpd
screenshots:
http://imageshack.us/photo/my-images/14/img0094vn.jpg/
http://imageshack.us/photo/my-images/692/img0093wkb.jpg/
http://imageshack.us/photo/my-images/401/img0092km.jpg/
http://imageshack.us/photo/my-images/844/img0091hbw.jpg/
And this happens when you drop your tablet: LOLZ
http://imageshack.us/photo/my-images/191/img0096sgn.jpg/
http://imageshack.us/photo/my-images/18/img0095nr.jpg/
Quide for the noobs:
Install the cwm recovery by go into the normal recovery then to install update zip fromsd card en then navigate to the cwm file and then select and click yes after that installed is turn your tablet off and go in the CWM recovery by holding the power and volume up button hold and then let go when you are in the CWM recovery in the CWM recovery navigate through the volume up / down to install zip from sd card ---> choose zip from sd card ---> then choose the ROM you just downloaded and click that then click yes and He will begin will installing after that is done reboot your tablet ENJOY!!!
Greetings Safariking
Require root first
Hi safariking,
I have some experience flashing ICS roms on my Galaxy S, I even started out from scratch when the phone was running an early version of GB. I got it rooted (with a lot of help of reading) however I'm not really sure how to proceed with your instructions on updating my Qware Pro 2 to your custom rom.
First of all, I'm failing to even navigate to the zip file while in normal recovery, I've even tried to rename the file to update.zip...
Could it be that it cannot work when the tablet is not rooted?
I tried to root it a while ago, using Gingerbreak, but somehow that is not compatible with the tablet.
You'd think it easy to find out how to root the device, but I'm kind of ashamed to have to say I'm stuck here...
Can you please give me some hints or links to a website where I can read more about acquiring root access on a Pro 2?
Thanks in advance.
safariking said:
Here is a custom ROM for the Pro 2 if anyone still interested in it!
KEEP IN MIND EVERYTHING THAT YOU DO IS AT YOUR OWN RISK I'M NOT RESPONSIBLE FOR ANY DAMAGE TO YOUR DEVICE.
ONLY FOR THE QWARE PRO 2!!!
- Based Yarvik 250
- ADW Launcher installed
- Lock screen in landscape mode now
- Much faster
- Statusbar icons and smaller
Enjoy!
Download V1
Download link: http://www.mediafire.com/?8hj5xqe4j6vpe5z
CWM Recovery: http://www.mediafire.com/?fx1vx993lg1lxkv
Download V2
Download link: http://www.mediafire.com/?fxycl487amxbcpd
screenshots:
http://imageshack.us/photo/my-images/14/img0094vn.jpg/
http://imageshack.us/photo/my-images/692/img0093wkb.jpg/
http://imageshack.us/photo/my-images/401/img0092km.jpg/
http://imageshack.us/photo/my-images/844/img0091hbw.jpg/
And this happens when you drop your tablet: LOLZ
http://imageshack.us/photo/my-images/191/img0096sgn.jpg/
http://imageshack.us/photo/my-images/18/img0095nr.jpg/
Quide for the noobs:
Install the cwm recovery by go into the normal recovery then to install update zip fromsd card en then navigate to the cwm file and then select and click yes after that installed is turn your tablet off and go in the CWM recovery by holding the power and volume up button hold and then let go when you are in the CWM recovery in the CWM recovery navigate through the volume up / down to install zip from sd card ---> choose zip from sd card ---> then choose the ROM you just downloaded and click that then click yes and He will begin will installing after that is done reboot your tablet ENJOY!!!
Greetings Safariking
Click to expand...
Click to collapse
Hi, you probably did not notice my reply because I did not use quote:
Hi safariking,
I have some experience flashing ICS roms on my Galaxy S, I even started out from scratch when the phone was running an early version of GB. I got it rooted (with a lot of help of reading) however I'm not really sure how to proceed with your instructions on updating my Qware Pro 2 to your custom rom.
First of all, I'm failing to even navigate to the zip file while in normal recovery, I've even tried to rename the file to update.zip...
Could it be that it cannot work when the tablet is not rooted?
I tried to root it a while ago, using Gingerbreak, but somehow that is not compatible with the tablet.
You'd think it easy to find out how to root the device, but I'm kind of ashamed to have to say I'm stuck here...
Can you please give me some hints or links to a website where I can read more about acquiring root access on a Pro 2?
Thanks in advance.
It works
Finally got it working.
After I put the zip files on the external SD card I was able to navigate to it and flash CWM and after that your custom rom V2 which is an improvement regarding speed and battery life.
Sofar I'm very happy, thanks!
I've also tried CyanogenMod 7 via fun_'s thread, but neighter the Yarvik rom (touchscreen does not work) nore the Roverpad rom (HD film playback does not work) is a success.
I'm going to try your V1, to see if it makes any difference...
Cheers...
Add ics style and ics buttons
Sent from my GT-i9070 using xda premium
Hi,
I just flashed my pro 2 with this rom and it works OK (only the screen-orientation sensor is behaving strange).
I also wanted to try the stock-rom update from the qware website. I tried the flashprg that came with it but i think buy usinge the cwm recovery i can't use this prg anymore. Do you have a original recovery lying around? (or otherwise have a solution for flashing the original stock-rom). If so i will be thankfull!
Bob.
CoolCatGetHome said:
Add ics style and ics buttons
Sent from my GT-i9070 using xda premium
Click to expand...
Click to collapse
Not Possible!
I think!
This Device has low specs!
safariking said:
Here is a custom ROM for the Pro 2 if anyone still interested in it!
KEEP IN MIND EVERYTHING THAT YOU DO IS AT YOUR OWN RISK I'M NOT RESPONSIBLE FOR ANY DAMAGE TO YOUR DEVICE.
ONLY FOR THE QWARE PRO 2!!!
- Based Yarvik 250
- ADW Launcher installed
- Lock screen in landscape mode now
- Much faster
- Statusbar icons and smaller
Enjoy!
Download V1
Download link:
CWM Recovery:
Download V2
Download link:
Greetings Safariking
Click to expand...
Click to collapse
For wich version is this update ???
Will it work 100% on the Qware Tablet PC Pro2 10" ?? (The early version of the QW TB-1010)
Hello Fire owners!
I open this thread to keep all things of Fire together, only one thread, everything here.
So here we go:
THIS THREAD IS FOR MOTOROLA XT311/XT316/XT317, XT530/XT531, XT532 AND XT611 (aka SMARTFLIP) ONLY. IF YOU HAVE A SIMILAR THREAD, PLEASE PM ME AND PASS ME YOUR POST. LET'S KEEP XDA ORGANIZED!
CWM FOR FIRE XT XT530/XT532, SPICE XT XT531, FIRE XT311, SPICE KEY XT316 OFFICIALLY LAUNCHED
This thread was focused in the 2nd-Init for XT31X and XT530, 531 and 532. For almost six months, we worked patientlly to get the CWM working on our devices. The wait for CWM is OFFICIALLY OVER. In a couple days ago, our friend aweosomeabhijeet found a way to run CWM on Gingerbread. The tutorial (made by himself) will be posted NOW:
Hey Guys
All your wait is over.
Here I'll tell you how to get CWM for Moto Fire XT.
Disclaimer : I'm not responsible for any damage to your phone. I have tried it and finished successfully.
Try only if you know little bit about android.
This is beta version. However, a dev is working on not using a PC to reboot back into system, and is trying to make the installation simplified.
Lot of thanks to andrewidya
Required things
1. Rooted XT
2. Pc
Download these things on your phone:
1. Terminal emulator
2. Busybox(Open it and install)
3. Root browser
4. Pimp my Rom
5. ES file explorer
You can find all of them in the Play Store.
If you have done with it download the attachment.
Now main work.
It is not easy though but I think everyone can do it.
Steps:
1. Extract the attachment and copy it to your sdcard
2. Mount /system as RW.
3. Open Root Browser and copy bootmenu folder from sdcard/XT530 and paste it in /system.
4. Open Pimp My Rom and Add universal init.d support.
5.Create 97bootmenu manually.(For this using ES file explorer is recommended)
Steps:
a.Open /system/etc/init.d
b. Create a file, name it 97bootmenu.
c. Open the file as text
Type:
Code:
#!/system/bin/sh
stop
exec /system/bootmenu/binary/bootmenu
d.save the file
6. Change permissions of 97bootmenu to rwx r-- r--
7. Reboot your phone.
Now your phone will start at bootmenu.
Select Recovery>Custom Recovery
PS: If you want to get back the phone to boot normally. Just connect it to PC, open CMD and type
cd path-to-adb.exe
adb shell
rm -R /system/etc/init.d/97bootmenu
exit
adb reboot
I succeeded here's the video:
http://youtu.be/OyHwMqkBArk
Sorry for poor camera quality.
Thanks to all the members.
Special Thanks to:
Gentrylamp for creating bootmenu.
7amdoun for his great knowledge and modding bootmenu for XT530.
andrewidya for correcting me at every point.
Mazen.kh for everything he did.
Mr.Indigo for giving us hopes.
And all other members whom I forgot to mention here.
Click to expand...
Click to collapse
This above quote is the 1ST post of his thread.
THANKS TO HIM AND TO ALL OF THE DEVELOPERS WHO HELPED TO GET THIS.
ROOTING & UNROOTING
You will follow this tutorial if you have 2.3.5 version of Android:
Downloads:
Here are the apps/files needed for Rooting -
1. SuperOneClick 2.3.3.0
2. SUT LR 1.8.2 (Doesn't seem to be working on 64-bit systems)
3. FXX_PR3_NV.xml and NvDefinition.xml [ATTACHED]
Before Rooting:
Prepare your phone by doing the following:
- Go to Settings > Applications > CHECK "Unknown Sources"
- Go to Settings > Applications > Developer > CHECK "USB Debugging" and "Stay Awake"
- Connect your phone via USB, when prompted DO NOT select USB Mass Storage.
- Extract FXX_PR3_NV.xml and NvDefinition.xml from the attached zip file in to a folder
- Now, install SUT LR, run the app
- Select the FXX_PR3_NV.xml [ensure NvDefinition.xml is also in the same folder as FXX_PR3_NV.xml]
- Your phone will restart.
It does NOT erase anything on the phone, since it only patches the ROM.
Rooting:
After the phone restarts, open SuperOneClick and select root. It will take less than a minute to finish.
Click to expand...
Click to collapse
From: Motorola Fire XT / XT-530 / XT-531 ROOTING! - NEW METHOD - [ DEVS NEEDED ] posted by the user jeet.9890427233
Official Motorola SBF Files
Link: www.grupoandroid.com/topic/43248-motorola-firmwares-superthread/
Just copy and paste.
Custom ROMs
None yet.
Custom Recovery
None Yet.
Custom Kernels
None yet.
Applications that you can removeThere are some apps that you can remove, here is the complete list with all apps:
My ROM is VIVO 2.3.5 and can be different in some ROMs.
7x27_FQC or FQC Program= YES, maybe is F actory Q uality C heck or other thing....
AccountAndSyncSettings.apk= NO
ApplicationsProvider.apk= NO - Will brick apps install/uninstall
APR.apk= ?
BatteryManagerAP.apk= YES
BatteryProtect.apk= ?
Bluetooth.apk= NO
BlueToothTestMode.apk= NO
Browser.apk= YES
Calculator.apk= YES
Calendar.apk= NO
CalendarProvider.apk= NO
Camera.apk= NO
CDA.apk= ?
CDASYSTEM.apk= ?
CertInstaller.apk= NO
Contacts.apk= NO
ContactsProvider.apk= NO
DataConnectionWidget= YES
DateTimeSetup.apk= NO
DbgCfgTool.apk= ?
DefaultContainerService.apk= ?
DeskClock.apk= YES/NO
DMClient.apk= NO
DownloadProvier.apk= NO
DownloadProviderUI.apk= NO
DrmProvider= NO
DxDrmApplication= NO
DxDrmPlugin= NO
ECompassCalibration= NO
Email= NO
Facebook_LT= YES
Fallback= NO
FileManager= YES
FM Radio= ?
Gallery3D= YES, but replace with another gallery app
GenieWidget= ?
- THIS LIST WILL BE UPDATED SOON -
Click to expand...
Click to collapse
If you are a DEV our a guy who can provide a ROM for us, please PM me and i will add you in GTalk. If you have a mod or something useful or want to help me, please PM me and i will add you on GTalk. If we get sucess this thread will be updated!
Thread changelog:
- Initial post
- CG2.smg extractor added to the 2nd Post (THANKS TO: Mazen.kh)
- Chainfire 3D support added ( THANKS TO: Overcrasher)
- Thread stopped a lil bit
- Back with some news
- SUPPORT FOR XT530/531/532 (FIRE XT) Added
- SUPPORT FOR XT317 (FIRE in Brazil) Added
- XT317 kernel tested, but didn't work smoothly as 2.2 kernel
- SUPPORT FOR XT611 (aka SMARTFLIP) added
- SUPPORT FOR XT611 DROPED. See more below.
- CWM FOR FIRE DEVICES LAUNCHED BY aweosomeabhijeet
about CG2.smg
Hey man I'm interested in the thread and i can help you extracting the CG2.smg
Here you are my tut. [for windows] it worked for me
1- unrar the file in the attachments
2- make sure that your file is named to 'CG2.smg' without quotes for sure, and in the same folder..
3- just run the .bat and wait for cmd to finish the job then you will find a folder called 'CG2-extracted' in the same place you extracted my .rar file
Note: you will find in the folder called 'CG2-extracted' some mbn files, systemsec.mbn is the /system folder in the xt311/xt316
extract it easily using unyaffs like a system.img file, if you need help in this PM me. i can help you extracting systemsec.mbn only, i dunno about other files also to repack systemsec.mbn you'll need mkyaffs and i think it's usable on ubuntu only and i can't help you with it
sorry for long reply but press thanks if i helped.
Mazen.kh said:
Hey man I'm interested in the thread and i can help you extracting the CG2.smg
Here you are my tut. [for windows] it worked for me
1- unrar the file in the attachments
2- make sure that your file is named to 'CG2.smg' without quotes for sure, and in the same folder..
3- just run the .bat and wait for cmd to finish the job then you will find a folder called 'CG2-extracted' in the same place you extracted my .rar file
Note: you will find in the folder called 'CG2-extracted' some mbn files, systemsec.mbn is the /system folder in the xt311/xt316
extract it easily using unyaffs like a system.img file, if you need help in this PM me. i can help you extracting systemsec.mbn only, i dunno about other files also to repack systemsec.mbn you'll need mkyaffs and i think it's usable on ubuntu only and i can't help you with it
sorry for long reply but press thanks if i helped.
Click to expand...
Click to collapse
IT WORKED!
Thanks!
It helps me a lot!
Now my device Works!
Thanks!
Sent from my Xt316
Is there any custom rom for XT316/XT311?
luume said:
Is there any custom rom for XT316/XT311?
Click to expand...
Click to collapse
Unfortunately not yet.. Neither custom recoveries
Mr.Indigo said:
IT WORKED!
Thanks!
Click to expand...
Click to collapse
Anytime Sir ! I just want to help in anyway getting this device better, By the way here's a list of useless applications so far !
- 7x27_FQC.apk
- Arabware.apk < 7 megabytes and useless
- Wifipowersavingmode.apk < I think it drains the battery faster -.-
- i also removed all motoswitch APKs, And installed go launcher instead in the system. And removed pre-installed live wallpapers
Also if you have errors like "preparing sd card - checking for errors" in the status bar you can delete system/bin/fsck_msdos since i deleted i get no errors for my partitioned sd card
Q/Request: Do you know how can i customize Notify led ? Like changing color and speed ? also it doesn't work with whatsapp!
Thanks anyway ! Ps. led works by Notifyled.apk.. of course you know xD
And Yeah, i found some srs files also, time ago, i thought it would be awesome to have a panel for it ! but maybe it's the normal speakers at the back and it's drivers..
Mazen.kh said:
Unfortunately not yet.. Neither custom recoveries
Anytime Sir ! I just want to help in anyway getting this device better, By the way here's a list of useless applications so far !
- 7x27_FQC.apk
- Arabware.apk < 7 megabytes and useless
- Wifipowersavingmode.apk < I think it drains the battery faster -.-
- i also removed all motoswitch APKs, And installed go launcher instead in the system. And removed pre-installed live wallpapers
Also if you have errors like "preparing sd card - checking for errors" in the status bar you can delete system/bin/fsck_msdos since i deleted i get no errors for my partitioned sd card
Q/Request: Do you know how can i customize Notify led ? Like changing color and speed ? also it doesn't work with whatsapp!
Thanks anyway ! Ps. led works by Notifyled.apk.. of course you know xD
And Yeah, i found some srs files also, time ago, i thought it would be awesome to have a panel for it ! but maybe it's the normal speakers at the back and it's drivers..
Click to expand...
Click to collapse
No, i don't know, srry!
And we cannot use the control panel with the file incluided in the ROM. Needs a lot of files...
And i'm trying to por XT300 Toggle Widget to XT316. It will be harder but... it's beautiful!
Mr.Indigo said:
No, i don't know, srry!
And we cannot use the control panel with the file incluided in the ROM. Needs a lot of files...
And i'm trying to por XT300 Toggle Widget to XT316. It will be harder but... it's beautiful!
Click to expand...
Click to collapse
It's weird how motorola build their phones and drivers, unlike samsung they give full customization !
And good luck man i wish i could help but i'm not really helpful in porting and modding
Mazen.kh said:
It's weird how motorola build their phones and drivers, unlike samsung they give full customization !
And good luck man i wish i could help but i'm not really helpful in porting and modding
Click to expand...
Click to collapse
Yeah, Motorola lock the bootloader, locks the customization and much more. We need a CWM. FASTER!
Edit: before 2.3 versions, Motorola odexed the roms. All of the files were odexed. But Motorola now deodexed everything. So it will be easier.
And i think we can port the CWM from XT300. So, let's try!
Mr.Indigo said:
Yeah, Motorola lock the bootloader, locks the customization and much more. We need a CWM. FASTER!
Edit: before 2.3 versions, Motorola odexed the roms. All of the files were odexed. But Motorola now deodexed everything. So it will be easier.
And i think we can port the CWM from XT300. So, let's try!
Click to expand...
Click to collapse
I didn't know that there was cwm for xt300, but i think, if there is cwm for xt530/xt531/xt532 it'd be easier to port, since xt53X is to close to our xt311/xt316 and it also have 2.3.5 while xt300 2.1 only
Edit: i think xt311/xt316 users will never have custom recoveries/roms unless the bootloader is unlocked, and it'll be so hard to unlock such bootloader since the phone is not popular
Mazen.kh said:
I didn't know that there was cwm for xt300, but i think, if there is cwm for xt530/xt531/xt532 it'd be easier to port, since xt53X is to close to our xt311/xt316 and it also have 2.3.5 while xt300 2.1 only
Edit: i think xt311/xt316 users will never have custom recoveries/roms unless the bootloader is unlocked, and it'll be so hard to unlock such bootloader since the phone is not popular
Click to expand...
Click to collapse
Some guys tried to do an 2ndInit to maybe try to get CWM work. But didn't worked. A file from the battery (when you turn off the phone and conntect the charger, the big battery icon) was missing. But works without this file.
AND I FOUND WHERE WE CAN ACTIVATE SRS! Is in cda.prop, it's configured to false.
So what happens if i changed the value to true ?
i don't think cda props apply actually i tried to change the value of lock screen support rotation to true and nothing changed.
And Yup i read something about that battery icon too but i didn't understand fully how does that relate to unlocking bootloader
i think the bootloader must get hacked easily since as i see it's a common bootloader in many fones for ex. xt530 xt531 xt532 xt300 xt311 xt316 xt317 or am i wrong ?
If i can test the ROM in my computer (i don't know how to do it), we see if works. And Bootloader it's not the same for every phone series. XT300 executes 2.1 WITH UNLOCKED BOOTLOADER. And XT316 with 2.3.5 WITH THE LOCKED Bootloader.
The SRS file is in the attachments. Just take a look on the 'st line:
BLOCK... I understand that is blocked.
And the battery icon maybe is on a apk or anywhere. We might look better.
EDIT:
I googled around and i found a thread that talks about CG2.smg. They tried to do the same what i doing, and didn't finish very well. The phone was bricked, but they use some files, replace and the ROM was going on very well.
Mr.Indigo said:
I googled around and i found a thread that talks about CG2.smg. They tried to do the same what i doing, and didn't finish very well. The phone was bricked, but they use some files, replace and the ROM was going on very well.
Click to expand...
Click to collapse
i actually didn't understand what you said in the "EDIT" but i read that even with a locked bootloader we can have a custom rom, but not a custom kernel right ?
so you can recompress the edited cg2.smg files and re sbf it again after customizing it or am i saying meaningless words ?
Mazen.kh said:
i actually didn't understand what you said in the "EDIT" but i read that even with a locked bootloader we can have a custom rom, but not a custom kernel right ?
so you can recompress the edited cg2.smg files and re sbf it again after customizing it or am i saying meaningless words ?
Click to expand...
Click to collapse
OK. I will explain the edit first.
They edit the systemsec.mbn, repack the mbn and repack everything. but they've got an error. Then, the phone was bricked and RSD doesn't saw the phone.
A custom kernel will be pretty great, but we have to unlock the bootloader 1st.
Mr.Indigo said:
OK. I will explain the edit first.
They edit the systemsec.mbn, repack the mbn and repack everything. but they've got an error. Then, the phone was bricked and RSD doesn't saw the phone.
A custom kernel will be pretty great, but we have to unlock the bootloader 1st.
Click to expand...
Click to collapse
so what kind of error did they get, cause i wanted to do the same as they and repack the rom as sbf and flash it..
also, can we try porting as .nb0 rom? i can see our stock recovery have the option to flash nb0 files
Mazen.kh said:
so what kind of error did they get, cause i wanted to do the same as they and repack the rom as sbf and flash it..
also, can we try porting as .nb0 rom? i can see our stock recovery have the option to flash nb0 files
Click to expand...
Click to collapse
Maybe... Here is the error they got:
I got this after the flash attempt.
Phone[0000]: Error flashing subscriber unit. Device API error. 0xE002000B Address 0x94C3800 Command: BIN (0xE032300B)
Click to expand...
Click to collapse
I've got from ModMyMobile (M3). They mod and bang! Bricked the device!
But they recovered.
See another error here
The recover is change the FLEX VERSION to please flash please (something like that)
Does this file mean anything ?
Code:
ro.product.model.num=2013
ro.product.name=XT316
ro.product.device=XT316
ro.product.model=XT316
ro.product.brand=Motorola
ro.product.board=XT316
ro.telephony.num.auto.hyphen=false
ro.telephony.gsm.spn.shortname=true
ro.telephony.gsm.wait.switch=true
ro.telephony.rat.network.select=true
ro.telephony.gsm.sms.auto-reg=false
ro.telephony.add.mccmnctable=true
ro.telephony.spn.support.mvno=false
ro.telephony.fdn.data=true
ro.telephony.configurable.mtu=false
ro.nitz.name.ignore.plmns=72405
ro.telephony.cphs-spn.support=true
ro.telephony.dun.show=true
ro.telephony.fast.dormancy=true
ro.tether.denied=false
ro.telephony.mvno.sim.spn=false
ro.telephony.croatia.shortcode=false
ro.CDG_MENU_EVDO_ONLY=false
ro.telephony.custom.showspn=false
ro.telephony.extended.mnc=false
ro.telephony.hidemenu.data=false
ro.telephony.gsm.ecclist=112,911,190
ro.telephony.ecclist=112,911,190
ro.telephony.cdma.ecclist=112,911,190
ro.telephony.gsm.voicemail=*555
ro.telephony.cdma.ecm=false
ro.contacts.number.match.length=11
ro.contacts.number.match.minima=7
ro.contacts.polyphonename=false
ro.sf.lcd_density=120
ro.product.locale.language=pt
ro.product.locale.region=BR
ro.config.dbgcfgtool_config=3
ro.DRM_SOLUTION_ID=1
ro.SYSTEM_CTA_MODEL=false
ro.NETWORK_DISABLE_3G_MODULE=false
ro.USB_PLUG_IN_NOTIFICATION=true
ro.LOCKSCREEN_SUPPORT_ROTATION=false
ro.SETTINGS_ENABLE_MSISDN_ALPHA=true
ro.CC_SEC_INC_CALL_OPTIONS=false
ro.SETTINGS_LANG_HIDE_TW_CHINA=false
ro.CALENDAR_FESTIVALS_OPTION=false
ro.SETTINGS_LOCK_PRELOADED_APN=NONE
ro.PHONE_ENABLE_COUNTRY_CODE=false
ro.MEDIA_ENABLE_SRS=false
ro.FB_ENABLE_HIDE_FOLDER=false
ro.CONTACT_VCARD_VERSION=3.0
ro.NETWORK_SB_CUST_FD_MECH=false
ro.SETTINGS_LOCK_VOICEMAIL_NUM=false
ro.CC_QUERY_CF_ON_BOOT=false
ro.BROWSER_ENABLE_PROXY=false
ro.SETTINGS_REMOVE_SIGNAL_STR=false
ro.SYSTEM_GCF_MODEL=false
ro.CC_HIDE_CB_PW_CHANGE=false
ro.SYSTEM_UI_STYLE_ID=0
ro.SB_SHOW_PLMN=false
ro.SETTINGS_DISABLE_TOUCH_TONE=false
ro.NETWORK_ENABLE_HOTSPOT_SEC=false
ro.CC_ENABLE_MAKE_OOS_CALL=false
ro.NETWORK_NET_MODE_IND=false
ro.NETWORK_ENABLE_OP_LABEL=false
ro.NETWORK_HOTSPOT_AUTO_OFF=false
ro.NETWORK_OP_NAME_OPTION=0
ro.NETWORK_WIFI_SLEEP_POLICY=0
ro.NETWORK_SIGNAL_DISP_STYLE=0
ro.SYSTEM_LED_NOTIFY_STYLE=0
ro.SL_DISABLE_UNLOCK_PROMPT=false
ro.BT_ENABLE_FF_RW=false
ro.MUSIC_DEACTIVATED_BY_FW_BW=false
ro.RSS_DISABLE_COST_PROMPT=false
ro.SETTINGS_HIDE_WIFI_SCAN=false
ro.PHONE_ENABLE_REBOOT_FUNC=false
ro.SYSTEM_SIM_WATCHER=false
ro.CAMERA_DISABLE_H263_ENCODER=false
ro.SYSTEM_SPK_OFF_WHEN_HS_IN=false
ro.NETWORK_REMOVE_GSM_COMBO=false
ro.STANDMODE_ENABLE_TV=false
ro.IME_DISABLE_AUTO_PUNC=false
ro.IME_DISABLE_SHOW_SUGGESTION=false
ro.MEDIA_HIDE_3g2_FILE=false
ro.BROWSER_DL_POPUP_DIALOG=false
ro.CC_HIDE_SIP_UI=false
ro.SYSTEM_DISABLE_LOW_MM_CHECK=false
ro.SYSTEM_ENABLE_FLIP_FONT=false
ro.MUSIC_ENABLE_FORCE_TRNAS_RU=false
ro.DL_PROVIDER_CUSTOMIZED_FUNC=0
ro.com.google.clientidbase=android-motorola
ro.com.google.clientidbase.yt=android-motorola
ro.com.google.clientidbase.am=android-motorola
ro.com.google.clientidbase.gmm=android-motorola
ro.com.google.clientidbase.ms=android-hms-tef-{country}
ro.hwt.softbank=false
ro.cust.cover_shutdown=false
kent_lkc said:
Does this file mean anything ?
Code:
ro.product.model.num=2013
ro.product.name=XT316
ro.product.device=XT316
ro.product.model=XT316
ro.product.brand=Motorola
ro.product.board=XT316
ro.telephony.num.auto.hyphen=false
ro.telephony.gsm.spn.shortname=true
ro.telephony.gsm.wait.switch=true
ro.telephony.rat.network.select=true
ro.telephony.gsm.sms.auto-reg=false
ro.telephony.add.mccmnctable=true
ro.telephony.spn.support.mvno=false
ro.telephony.fdn.data=true
ro.telephony.configurable.mtu=false
ro.nitz.name.ignore.plmns=72405
ro.telephony.cphs-spn.support=true
ro.telephony.dun.show=true
ro.telephony.fast.dormancy=true
ro.tether.denied=false
ro.telephony.mvno.sim.spn=false
ro.telephony.croatia.shortcode=false
ro.CDG_MENU_EVDO_ONLY=false
ro.telephony.custom.showspn=false
ro.telephony.extended.mnc=false
ro.telephony.hidemenu.data=false
ro.telephony.gsm.ecclist=112,911,190
ro.telephony.ecclist=112,911,190
ro.telephony.cdma.ecclist=112,911,190
ro.telephony.gsm.voicemail=*555
ro.telephony.cdma.ecm=false
ro.contacts.number.match.length=11
ro.contacts.number.match.minima=7
ro.contacts.polyphonename=false
ro.sf.lcd_density=120
ro.product.locale.language=pt
ro.product.locale.region=BR
ro.config.dbgcfgtool_config=3
ro.DRM_SOLUTION_ID=1
ro.SYSTEM_CTA_MODEL=false
ro.NETWORK_DISABLE_3G_MODULE=false
ro.USB_PLUG_IN_NOTIFICATION=true
ro.LOCKSCREEN_SUPPORT_ROTATION=false
ro.SETTINGS_ENABLE_MSISDN_ALPHA=true
ro.CC_SEC_INC_CALL_OPTIONS=false
ro.SETTINGS_LANG_HIDE_TW_CHINA=false
ro.CALENDAR_FESTIVALS_OPTION=false
ro.SETTINGS_LOCK_PRELOADED_APN=NONE
ro.PHONE_ENABLE_COUNTRY_CODE=false
ro.MEDIA_ENABLE_SRS=false
ro.FB_ENABLE_HIDE_FOLDER=false
ro.CONTACT_VCARD_VERSION=3.0
ro.NETWORK_SB_CUST_FD_MECH=false
ro.SETTINGS_LOCK_VOICEMAIL_NUM=false
ro.CC_QUERY_CF_ON_BOOT=false
ro.BROWSER_ENABLE_PROXY=false
ro.SETTINGS_REMOVE_SIGNAL_STR=false
ro.SYSTEM_GCF_MODEL=false
ro.CC_HIDE_CB_PW_CHANGE=false
ro.SYSTEM_UI_STYLE_ID=0
ro.SB_SHOW_PLMN=false
ro.SETTINGS_DISABLE_TOUCH_TONE=false
ro.NETWORK_ENABLE_HOTSPOT_SEC=false
ro.CC_ENABLE_MAKE_OOS_CALL=false
ro.NETWORK_NET_MODE_IND=false
ro.NETWORK_ENABLE_OP_LABEL=false
ro.NETWORK_HOTSPOT_AUTO_OFF=false
ro.NETWORK_OP_NAME_OPTION=0
ro.NETWORK_WIFI_SLEEP_POLICY=0
ro.NETWORK_SIGNAL_DISP_STYLE=0
ro.SYSTEM_LED_NOTIFY_STYLE=0
ro.SL_DISABLE_UNLOCK_PROMPT=false
ro.BT_ENABLE_FF_RW=false
ro.MUSIC_DEACTIVATED_BY_FW_BW=false
ro.RSS_DISABLE_COST_PROMPT=false
ro.SETTINGS_HIDE_WIFI_SCAN=false
ro.PHONE_ENABLE_REBOOT_FUNC=false
ro.SYSTEM_SIM_WATCHER=false
ro.CAMERA_DISABLE_H263_ENCODER=false
ro.SYSTEM_SPK_OFF_WHEN_HS_IN=false
ro.NETWORK_REMOVE_GSM_COMBO=false
ro.STANDMODE_ENABLE_TV=false
ro.IME_DISABLE_AUTO_PUNC=false
ro.IME_DISABLE_SHOW_SUGGESTION=false
ro.MEDIA_HIDE_3g2_FILE=false
ro.BROWSER_DL_POPUP_DIALOG=false
ro.CC_HIDE_SIP_UI=false
ro.SYSTEM_DISABLE_LOW_MM_CHECK=false
ro.SYSTEM_ENABLE_FLIP_FONT=false
ro.MUSIC_ENABLE_FORCE_TRNAS_RU=false
ro.DL_PROVIDER_CUSTOMIZED_FUNC=0
ro.com.google.clientidbase=android-motorola
ro.com.google.clientidbase.yt=android-motorola
ro.com.google.clientidbase.am=android-motorola
ro.com.google.clientidbase.gmm=android-motorola
ro.com.google.clientidbase.ms=android-hms-tef-{country}
ro.hwt.softbank=false
ro.cust.cover_shutdown=false
Click to expand...
Click to collapse
This is cda.prop right?
it has some tweaks like build.prop, if you tried to change the mobile model that appears to the market from build.prop it won't work, but if you change it from cda.prop it will work also it have some other tweaks that i actually don't know what's it's use
And Don't Forget Thanks Button ^^
XT316 bricked
Hello guys, sorry if this is not the best place to post a problem but, this is the only one active discussion about XT316 that i have found, i have this phone with Brazil Claro stock 2.3.3 Gingerbread Android installed, then i have installed the ChainFire3D hoping to have better experience with some games...
But i got a bricked phone... when powering on, the phone shows only the Motorola logo, then a black screen with no response, and continous reboot
I started the phone in recovery mode and tryed to perform a Factory Recover, but no sucess, same with Wipe Cache Partition option, so, what is left to do now is my question...
Hi, i got a prestigio multipad 5080 pro, i rooted my device and everything was fine until i changed the DPI of my device in order to play dead space. Now my device keeps says "unfortunately, launcher has stopped" on a loop is there any way to fix this? i have tried factory reset and it did nothing.
Thanks.
a good rom and stable so far.
download from here
http: // x--t-e-a-m. blogspot. it/ and click on Download:
XTeam 4.1 QUI
plus for setting your external sd as a nand *as a main installing card... use this http :// crewrktablets. arctablet. com/?wpfb_dl=330
use google translate cause its italian website...anyway ...
steps are easy ... unrar XTeam 4.1 ...
1) Turn off your device
2) Locate the folder Rockusb_driver in the XTeam 4.1 folder and install the drivers for your computer.
3) on the tablet Hold sounds Down Button and connect the device.
4) open with right click and run as administrator the rk29update.exe
5) press the button "formatta!!!"
6) tick the "Loader"
7) Download this kernel from here: http: // www .2shared. com/file/GmdSyNG1/kernel_for_pmp_5080cpro_with_o.html
 replace the kernel with the one that i gave you from the link
9) press the "Aggiorna! ! " button and wait until the program overwrite the new firmware
10)when the tablet reboot it will go through cwm and the install the
Oma CM10 ExtSD To NAND OTG Fix.
11) the new firmware have OTA updater so update your tablet until you have no other updates...(i realised that i had to download the updates from ota and install them manual but anyway...)
12) in one point the updates from ota updater will change your kernel but dont worry.you will just lose temporary the screen rotation so...
install all the updates and in the end run the rk29update.exe again untick all the things there and keep only the kernel ticked and use the kernel i gave you.that match with your 5080 cpro. this time dont push formatta !!!.
Just overwrite the kernel and click aggiorna! !
your device will restart and ta da !!! you have the latest firmware for your Prestigio 5080 C PRO. overclocked and rooted with 1 giga for apps
plus 2x faster than factory's firmware.
i wanna say a big thanx to OMA for the kernel http: //crewrktablets. arctablet. com/
a big thanx to X TEAM for this awesome firmware
and a huge thanx to my self that i had the patience to search for the specific model what to do. It took me about 2 days to gather all the informations i needed.
And a huge apologize to oma that i didnt use his JB version for the prestigio tablet but i test it and it was kinda slow and laggy for my tablet xD
ps: in case that u need more info i ll be around to help you
Remember the steps are only for Prestigio PMP 5080 C PRO and NOT for the Prestigio 5080B.
For the Prestigio 5080B you must find the specific Kernel that works on the device cause else you will have problem with the ROTATION
Sent from my Xteam Smartpad 810c using Tapatalk HD
Hey guys.
I'm currently working on a Lollipop ROM For 7" MTK Acer Tablets. (I'm currently using the B1-720 as the 'Testing Tablet.')
FEATURES...
-Being based off Xperia Z4 Tablet LOLLIPOP
-Z3+ Boot Animation
-Lollipop UI (with its own unique touches.)
-Lots of Lollipop Animations. (Ripple Effect, App open Animations, Listview Animations etc.)
-Animations and Apps ported from other ROMS.
-...and much more.
I was going to make a Marshmallow 6.0 ROM, but the Project fell right on its face. Lollipop is much easier to work on.
And BTW I'm sorry for posting this into on the General Forum section. Since there isn't an Acer Iconia B1 Forum, I had to post it here. Any quote movements won't bug me at all!
Compatibility list:
Fully Working Devices:
Acer Iconia B1-720
Devices that may use this ROM but DOESN'T support the build.prop and SystemUI.apk in the ROM.
Acer Iconia B1-730/HD
Acer Iconia b1-750
Acer Iconia B1-770
Acer Iconia B1-710
Other Devices that MAY work with this ROM.
Acer Iconia A-Series Tablets
Other MTK based Acer Tablets
Other Android phones running Android Kitkat
Oh Yeah and If you want to see Progress videos of the Early ROM in action on the B1-720, then click on this link: https://www.youtube.com/playlist?list=PL2WiOdCyolCAua6FClkgBrO3UlDZYnW2s
UPDATE 12 MARCH 2016!!!
Hey guys. I've got great news. The ROM is done and ready to be downloaded! Remember: THIS IS NOT A FLASHABLE .ZIP ROM PLEASE DON'T TRY TO FLASH THIS VIA CWM, TWRP, OR ANY OTHER RECOVERY! Instead, extract the zip file folders and files using a trusted app such as Root Explorer and follow the steps giving in the _READ_THIS_TEXT_FILE!.txt file given in the ROM.
REMEMBER: this is a 80% DIY ROM with giving files and Apps to be manually installed by YOU! Don't try to flash this via CWM!
Steps:
1: Extract the zip file with Root Explorer.
2: Open the _READ_THIS_TEXT_FILE!.txt file and read for more steps.
3: Enjoy!
All apps and files given in this ROM is owned by their respectful owners!
Enjoy!
DOWNLOAD LINK
https://www.dropbox.com/s/589mm9hroosq4ox/LOLLIPOP_5.0.1_ROM_ACER_ICONIA_B1_SERIES.zip?dl=0
Would this work on a B1-730?
ctyndall77 said:
Would this work on a B1-730?
Click to expand...
Click to collapse
Yes. Perfectly. Just don't flash it; extract the files and follow the steps. The build.prop file may not work on your tablet, but apart from that, everything else should work prefectly. Thanks! ?
Brandon Nel said:
Yes. Perfectly. Just don't flash it; extract the files and follow the steps. The build.prop file may not work on your tablet, but apart from that, everything else should work perfectly. Thanks!
Click to expand...
Click to collapse
What exactly does the build.prop file do?
ctyndall77 said:
What exactly does the build.prop file do?
Click to expand...
Click to collapse
Changes RAM limit, Android version in settings, ROM name, Pixel Density etc. Only use the build.prop file if you have a B1-720 though!
Is it best to start out with a factory reset before copying the files to where they have to go? This will be my first time applying a different rom by not flashing and just want to get the steps done right.
ctyndall77 said:
Is it best to start out with a factory reset before copying the files to where they have to go? This will be my first time applying a different rom by not flashing and just want to get the steps done right.
Click to expand...
Click to collapse
Yes I recommend starting from the start then installing and moving all the files for the most amount of space on your device to install these files. In future updates I will provide updated apps and maybe a flashable ROM which can be flashed using stock recovery!
And if your using a B1-730, don't use the systemui.apk or odex. This will leave you with a black nav and status bar.
One last question. Is there a certain order to apply the files or not?
ctyndall77 said:
One last question. Is there a certain order to apply the files or not?
Click to expand...
Click to collapse
I recommend going in this order:
1: Install normal apks
2: Installing root
3: installing xposed apks and xposed installer it self.
4: Open the boot animations app and choose the cm12 boot animation.
5: Apply wallpaper
Then the rest if there are any more files.
If I Have A B1-710 With Android 4.1.2 I Can Use This?
Hugo Salce said:
If I Have A B1-710 With Android 4.1.2 I Can Use This?
Click to expand...
Click to collapse
Yes you can use 90% of this ROM woth your device. Use all of the files given in the ROM except for the SystemUI. Sorry for late reply
Sent from my D6503 using XDA-Developers mobile app
do you have a step by step guide for this?
On my acer b1-730hd 3g modem Huawei doesnt work on android 4.4.2 because it doesnt support Data usage or mobile data. B1 doesnt have opcion on/off... Does Lolipop 5 support 3g modem?
currently the link is broken
it will not work
Hi ! The link in OP seems to be dead. Is it possible to refresh it? This ROM could save my tablet, my only hope!
malar413 said:
Hi ! The link in OP seems to be dead. Is it possible to refresh it? This ROM could save my tablet, my only hope!
Click to expand...
Click to collapse
Snap. I'm hoping I can use it to cure the curse of losing wifi passwords on a B1-730.
I have acer b1-750 and I can't format it when I want to go to recovary mode I get this in my tablet
Entering Dnx mode.
waiting for fastboot command...
Help me plzz
This is a modified version of Kitkat.
Is this ROM available for download somewhere else?
@Brandon Nel, could you add a link again?