Database Info

[i9001][ROM]Cranium-It's Fast(CHECK NEWER THREAD!!)

HEllo peeps,here is v1 ALPHA!
Try to install with stock recovery
How to install
1. Use a phone with firmware I9001XXKP4 Rooted
2. deodex the phone according to this:
Instructions deodexing firmware I9001XXKP4 with ROOT access
1. Unpack archive and run xUltimate v2.2 Main.exe
2. If all goes well, xUltimate recognizes the phone and connect to it, then you will see a menu of options
(Your phone must be in debug mode enabled usb and "Emulation location")
3. Run "Option 1". After it's complete - launch "Option 2".
4. Then, run "Option 3"
5. Important! After starting "Option 3" =>
6. Run "Option 4" and wait until it ends.
7. Close xUltimate
8. Copy the folder "done_frame" and "done_app" (from the place where we unpacked the archive xUltimate) in the ROOT, not on the external flash (... mnt / sdcard ...)
9. We place the folder from the archive to the root of sdcard gscript
10. Install? BusyBox_installer_3.6.3 (run and provide the superuser, wait to be installed !!!), then install nl.rogro.GScriptLite
11. Restart the phone (peregruzka / fully charged?)
12. Put the phone in "debug mode on USB" and enabled "Emulation location"
13.Zahodim/Go? in GScript Lite -> Menu -> Add script -> Load file -> Save
14.Dalee click on the script execution Deodex
15.Dalee look like the phone is buggy and throwing out messages on closing different programs until you restart
16.Zagruzilsya? We use the phone with the firmware deodex.
If you're working on the program Main.exe paragraphs 4.3 pops up an error, you must update JAVA on your computer and it will work!
3.ustanovit (appoint, designate, assign) with instructions on odin cwm 4pda
Instructions:
1. One put a 3-AND FILE - Aries + CWR (from the archives!) And BOOT (from the firmware!)
2. stitches as usual ....
3. Phone does not go away after rebooting once in CWR and just loaded ....
4. After downloading, go out in rekaveri menu ... any way (I stopped using the Advanced menu from the header!)
get into the CWR, yes there is double vision, but to understand you can create a full backup is possible! I've done and happy with ... SHOULD finished the script itself to remove the split!
YES ---- control + and - keys, make the choice key.
4.ustanovit (appoint, designate, assign) with Market rom manager, through it to enter into recovery mode
select from the menu to update the cwm sd, select the zip with the firmware.
5.rejoice new firmware and wait for new ones.
if u screw up,just flash stock rom,and u r good to go!
It will work on any i9001 rom,but first try with xxkp4
Features:Also added :
init.d support
fully deodexed
zipaligned
juwe's ramscript
modded apps
removed bloatware
tw4.5 launcher+modded adw launcher
some custom scripts
modded swype and changed tracer colour
better gps and battery
htc sense live wallpaper+clock widget+launcher
DSP manager and some scripts from Cyanogen ModDisclaimer:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Click to expand...
Click to collapse
http://www.4shared.com/file/EY2BtjQi/signed_Cranium_i9001_kang2.html

Hi! I'm very happy!!! Thank you so much!!! We haven't clockwork mod. I'm with 2.3.4 XXKP4 and maybe it's the best rom at the moment. Can you tell me how I can get you the files? It is possible with ghost commander? And can you make this Quadrant hack for i9001? THANK YOU AGAIN!!!
//sorry for my bad english

karo_96 said:
Hi! I'm very happy!!! Thank you so much!!! We haven't clockwork mod. I'm with 2.3.4 XXKP4 and maybe it's the best rom at the moment. Can you tell me how I can get you the files? It is possible with ghost commander? And can you make this Quadrant hack for i9001? THANK YOU AGAIN!!!
//sorry for my bad english
Click to expand...
Click to collapse
Quadrant hack can be used for any android 2.1+ and rooted phone....
first install stock firmware....then root it......then copy the system folder from your phone(by root explorer) and then upload it....(do not install any apps!)
i dont know about ghost commander!

sakindia123 said:
Quadrant hack can be used for any android 2.1+ and rooted phone....
first install stock firmware....then root it......then copy the system folder from your phone(by root explorer) and then upload it....(do not install any apps!)
i dont know about ghost commander!
Click to expand...
Click to collapse
I can't install new firmware at the moment, but if no one doesn't get you the files, I will flashed it tomorrow.
Once again - thank you )))))))))))))))))))

ok............also answer by question in the root/unroot thread

sakindia123 said:
i want to make a custom rom for i9001....but some one would have to upload a stock system folder(i dont have this device) from the best stock rom for it......(then pm me)
i have also made rom for i9003!
also tell me do u have clockwork mod?if not, i will make odin flashable tar
Click to expand...
Click to collapse
can't you just grab .smd file and extract system from it? i mean if i try to romdump, it'll backup all kind of my personal stuff as well...
tell me an alternative way and i can do it by tomorrow

One more question. I'm with XXKP4 with installed only games and simple apps + root. Can't I do a factory reset and give you my android files without re-flashing?

yes.....u could do that....

sakindia123 said:
yes.....u could do that....
Click to expand...
Click to collapse
Okey thank you! Wait 1-2 hours

sakindia123 said:
yes.....u could do that....
Click to expand...
Click to collapse
are you an expert dev who compile from scratch or will you be using kitchen?

but some one would have to upload a stock system folder(i dont have this device) from the best stock rom for it
Click to expand...
Click to collapse
Then best is i9001's stock rom with android 2.3.4 ! I'll pm you the link now.

i m a learning dev....
and expert dev too use kichen for petty purposes like root and deodex!

Hi, I can't copy the files, becouse it writes "Paste in progress" about 1 hour and nothing... Have files copied but..?

i presume u have enough space in ur sd card!
try to leave that coping overninght!!!
also,try to pull via adb,it will be faster

Good to hear there is development on the custom rom-area! Your work is highly appreciated!

http://forum.xda-developers.com/showthread.php?t=850359
this guide by Rotahammer can also be used for i9001 to get rom dumps.............upload only stock dump or i will get ur personal data!

Is it possible to port cm7 to our device?
If we base on HTC Desire S cm7 mod which it have the same GPU and CPU, could we compile it to make it compatible to sgs+?

samyeung97hk said:
Is it possible to port cm7 to our device?
If we base on HTC Desire S cm7 mod which it have the same GPU and CPU, could we compile it to make it compatible to sgs+?
Click to expand...
Click to collapse
I'm not sure if you can call Desire S and Galaxy S+ the same since Desire S has MSM8255 and Galaxy S+ has MSM8255T, maybe those two processors use the same drivers? not sure about that...
Who's doing romdump? i can't at the moment since i have billion of personal stuff which i can't erase from my phone...anyone willing to romdump here?
EDIT: actually let me give it a try, i think i have adb, someone else should also try to do it too...
EDIT2: not working for me, i'm trying to get ADB...in the meantime someone keep trying to get the romdump !

I've find out that Desire S's processor driver is ARMv7 Processor rev 1 rather that our's rev 2.
Edit: My spare phone x8's driver is ARMv6 rev 5, but we have devs that compiled htc hero cm7 mod to our phone and worked flawlessly. But HTC Hero's driver is ARMv6 rev 2, so I think revision different doesn't matter.
Edit2: How about making lagfix?

samyeung97hk said:
I've find out that Desire S's processor driver is ARMv7 Processor rev 1 rather that our's rev 2.
Edit: My spare phone x8's driver is ARMv6 rev 5, but we have devs that compiled htc hero cm7 mod to our phone and worked flawlessly. But HTC Hero's driver is ARMv6 rev 2, so I think revision different doesn't matter.
Edit2: How about making lagfix?
Click to expand...
Click to collapse
well our first priority should be to make a stable rom first by the help of our indian mate and then we can use the kitchen to port a CM7 to our device. I need a stable custom rom first and i can try to port CM7 to ours.. (btw htc flyer uses our CPU)

[ROM] HTC PICO (a310e, explorer), Customised EU verzion

hi Guyz,
I was trying for Building a Custom Rom and was getting error in update binay. So now here it is Custom Rom for HTC EXPLORER (pico).
What u get:
1. European Version as base
2. apps2sd:
3. Cache 2 sd:
4. etc/init.d folder functionality.i.e. u can run scripts (attached one batch of scripts)
5. Rooted, Busybox Installed
6. data/app functionality
7. Approx. of 120mb space on startup.
What to do:
1. Download the rom from this link http://www.4shared.com/zip/IyFaISq4/Htc_Pico__Master_rom_EDITTED_.html
and copy to root of ur sdcard.
2. Go to recovery by removing battery, pressing volume down button + power button, then selecting recovery from the menu which will popup
2. Now, navigate to flash from sdcard option and flash the rom.
3. after flashing, i recommend clearing cache, dalvik cache, fix permissions, and a factory reset.
4. You must have 2nd partition on ur sdcard.
what to do with scripts Download from here http://www.4shared.com/zip/1jyn2_tT/scripts.html
Extract the scripts to sdcard and copy them to /system/etc/init.d folder and go to recovery and fix permissions.
Theme
Transparent. The zip is attached
Flash it in Custom recovery
Deodexed Version of the Rom
Download from Here: http://www.4shared.com/zip/N6dytdrK/masteredittedDEODXD.html
NOTE: The scripts (that are mentioned above) are already added to this version
For those who want to remove sense completely.
First install any other launcher before uninstalling sense.
To remove sense, remove or move (to sdcard) following apps from /system/app using root explorer(file browser)
HTML:
1. com.htc.FriendStream.apk
2. com.htc.musicWidget.apk
3. FriendStream.apk
4. Htccalender widget.apk
5. HtcClockWidget.apk
6. HtcContactWidget.apk
7. HtcDirect.apk
8. HtcLockScreen.apk (this will remove sense lockscreen, dont delete it if u want to keep the lockscreen
9. htcMailWidget.apk
10. HtcmsgWidgets.apk
11. HtcQuickLaunchWidget.apk
12. htcsettingwidgets.apk
13. MyHtc.apk
14. Rosie.apk
15. WeatherWidget.apk
16. skinscanner.apk

Nice!
Gotta try it!
Flashing a rom deletes all the contacts, messages and apps right?

PeaceMaker_htc said:
Nice!
Gotta try it!
Flashing a rom deletes all the contacts, messages and apps right?
Click to expand...
Click to collapse
Yes contact can always retaiibed via googlee accnt. N for messages download backup app from market
Sent from my Dell Streak using XDA App

Thanks!!
Need some clarifications..
Does it come with overclocked kernel?
How to move apps this way? Link2sd will move data now?

This rom has ext2/3/4 support and overclock?
Thanks.

jaggyjags said:
Thanks!!
Need some clarifications..
Does it come with overclocked kernel?
How to move apps this way? Link2sd will move data now?
Click to expand...
Click to collapse
First of this is first ever Rom
Now answer to your questions
No it doesnot comes with overclock kernel
For ext partitions u still need the kernel by yunnou as ext partition is function in kernels ..
Apps are automatically. Moving to data/app folder
And reg. Link2sd app i havent tryd till now . may b u can try and report
And it was earlier also moving data with yunnou kernel
Sent from my Dell Streak using XDA App

languages
This rom has the Portuguese language?

samueldf said:
This rom has the Portuguese language?
Click to expand...
Click to collapse
Not yet , sorry on that
as this was my first ever rom effort , i will find or any of u guyz can help me on that how to do so , or anything on google , or meanwhile, look for "locale" apps on market

Check this ROM by me
http://forum.xda-developers.com/showthread.php?p=22009878#post22009878
Overcklocked kernel included with modules.. deodexed.. and so on

whats the major diff between asia_india rom and this? any advantage as such? i hav asia indai, overclocked, ext support, links 2 sd, rooted.

Deleted
Sent from my Dell Streak using XDA App

@jitin02
just trying to help people, i have received PM during the last few weeks reporting roms could'nt flash on some peoples devices because they where not deodexed (finally found out the problem) or where having difficulties not knowing how to flash or do several steps in order to keep phones up to date and take the maximum out of their device.I thought it was easier just to make things myself than asking other people to do so.
Also I am preety keen to help others as much as they need, solving doughts as much as my nogledge reaches, making people undertand some difficult concepts or procedures.
I am very sorry if you thought this was a competition, you got reasons to think so. Next time I will let people try to solve there problems by themselves.
By the way, many thanks making this phone rootable for the first time, credits all goes to you for finding a way at last, I am extremely grateful

?
jaggyjags said:
@jitin02
just trying to help people, i have received PM during the last few weeks reporting roms could'nt flash on some peoples devices because they where not deodexed (finally found out the problem) or where having difficulties not knowing how to flash or do several steps in order to keep phones up to date and take the maximum out of their device.I thought it was easier just to make things myself than asking other people to do so.
Also I am preety keen to help others as much as they need, solving doughts as much as my nogledge reaches, making people undertand some difficult concepts or procedures.
I am very sorry if you thought this was a competition, you got reasons to think so. Next time I will let people try to solve there problems by themselves.
By the way, many thanks making this phone rootable for the first time, credits all goes to you for finding a way at last, I am extremely grateful
Click to expand...
Click to collapse
It's OK brother got totally not trying to point out to you
I an also keen to help people here and it's great and thanks to you that at least someone like you to be there for people when I an there thanks
And for rom. I have a deodxd version. but the problem is in non deodxd version the internal space came to be much but when I deodxd it the space went from 120--90. I will upload my deodxd version to.
Let's combine up both and try to help prompt this phone together and help people.
I have made a theme from Uot kitchen will upload it tomarw
And people there is on harm in posting problems here in thread reason being the about to use this rom. People should also know what's problems are and a request when you post problem and by chance you solve with it PLEASE UPDATE YOUR POST AND MARK IT SOLVED ALONG WITH SOLUTION. And this applies to jaggyjaggs rom too
No offense jaggy.
And grill will try to update op. With my theme. And another which I will try and deodxd version or this rom + another theme TRANSPARENT
JAGGY. I would like to know what problems people are facing n this version of. Rom and you are always welcome to help
Sent from my Dell Streak using XDA App

@Jitin & Jaggy
both of you are doing very good helping people and making custom roms for android noobs like me so never let yourself down...I know how it feels as i myself was a modder for nokia s60v5 series....So whatever happens dont let anything come in your way...just do what you feel is right...
if you want help testing roms and your scripts i m ready to help....I can be your BETA tester...

things are being solved gradually,
now no space limitations, people have no problem now to flash deodexed version. yes deodexed roms have to create extra "code" in dalvic cache but its easier to add tweaks and modify (using baksmali), I am working on it to add tweaks and hopefully make it faster, would love if people experiment with it and could implement them in future roms.
I have tried this: http://forum.xda-developers.com/showthread.php?t=1411317
but didn't work as expected, here is my reply in that thread: http://forum.xda-developers.com/showpost.php?p=22042958&postcount=105
The only thing people are reporting now is the lack of languajes, just european. I haven't got the knowledge yet to extract Roms from RUU and would be great to get them all to .zip Roms.
we could create a thread up to date with the progresses made and the future proyects and who is working on what, what do you think?

You guys ever noticed how skins dont seem to be enabled in the explorer? under personalize theres no skin option... any way to enable them? theming would be so much easier with them... and Jithin, what major diff/advantage do u find betwen the india and eu versions? :/

deepaktom said:
You guys ever noticed how skins dont seem to be enabled in the explorer? under personalize theres no skin option... any way to enable them? theming would be so much easier with them... and Jithin, what major diff/advantage do u find betwen the india and eu versions? :/
Click to expand...
Click to collapse
Reg. Skins: it seems like HTC tried to make a foool of us by putting skins options as it does nothing.
Reg. differ in Indian and EU version:
In indian, some extra apps + another one which noticed was the space. the space in indian came to be more as soon as i deleted 3-4 apps in indian which were not present in eu version.
+ the difference of bands + there is Hindi language keyboard in Indian version.

Root HTC Explorer
Hi.
Just one question.
If I root the phone, this one stay free for any operator?
jitin02 said:
hi Guyz,
I was trying for Building a Custom Rom and was getting error in update binay. So now here it is Custom Rom for HTC EXPLORER (pico).
What u get:
1. European Version as base
2. apps2sd:
3. Cache 2 sd:
4. etc/init.d folder functionality.i.e. u can run scripts (attached one batch of scripts)
5. Rooted, Busybox Installed
6. data/app functionality
7. Approx. of 120mb space on startup.
What to do:
1. Download the rom from this link http://www.4shared.com/zip/IyFaISq4/Htc_Pico__Master_rom_EDITTED_.html
and copy to root of ur sdcard.
2. Go to recovery by removing battery, pressing volume down button + power button, then selecting recovery from the menu which will popup
2. Now, navigate to flash from sdcard option and flash the rom.
3. after flashing, i recommend clearing cache, dalvik cache, fix permissions, and a factory reset.
4. You must have 2nd partition on ur sdcard.
what to do with scripts Download from here http://www.4shared.com/zip/1jyn2_tT/scripts.html
Extract the scripts to sdcard and copy them to /system/etc/init.d folder and go to recovery and fix permissions.
Theme
Transparent. The zip is attached
Flash it in Custom recovery
Deodexed Version of the Rom
Download from Here: http://www.4shared.com/zip/N6dytdrK/masteredittedDEODXD.html
NOTE: The scripts (that are mentioned above) are already added to this version
For those who want to remove sense completely.
First install any other launcher before uninstalling sense.
To remove sense, remove or move (to sdcard) following apps from /system/app using root explorer(file browser)
HTML:
1. com.htc.FriendStream.apk
2. com.htc.musicWidget.apk
3. FriendStream.apk
4. Htccalender widget.apk
5. HtcClockWidget.apk
6. HtcContactWidget.apk
7. HtcDirect.apk
8. HtcLockScreen.apk (this will remove sense lockscreen, dont delete it if u want to keep the lockscreen
9. htcMailWidget.apk
10. HtcmsgWidgets.apk
11. HtcQuickLaunchWidget.apk
12. htcsettingwidgets.apk
13. MyHtc.apk
14. Rosie.apk
15. WeatherWidget.apk
16. skinscanner.apk
Click to expand...
Click to collapse

Why isn't this thread popular? And what finally happened to jitin02?
cm9 htc a310e

[TUTORIAL][GUIDE]Complete Guide to ROOTING, CWM & ROM(s) for LAVA ETAB XTRON+(RK3066)

[TUTORIAL][GUIDE]Complete Guide to ROOTING, CWM & ROM(s) for LAVA ETAB XTRON+(RK3066)
Here is a short review first
| HARDWARE |:-: Talking about the Lava Xtron+’s hardware, the tablet boasts a dual core Cortex A9 CPU with each core clocked at 1.5Ghz and a Mali 400 Quad Core GPU.
Well, for the proof of graphics power, see the benchmarks by fonearena.com ,63.9 fps in nenamark, and the most important thing according to me, RK3066 IS THE BEST LAST GEN GAMING CHIPSET BETTER THAN TEGRA 3...I am a true geek and after searching for 20+ hours came to a conclusion that this is the best piece of android till 12-13k,(except Lumia 520 but it is windows)..
| BATTERY | :-:Coming on to battery, When I opened the battery stats page I find that Cell standby had consumed nearly 60% of the battery.WHAT!? Cell standby is the battery used by radio cells for mobile networks. This tablet DOES NOT have cell radio! The engineers working on this tablet didn't even bother to setup the OS properly and instead chose to simply download Android 4.2, flashed it in the tablet and have put it up on sale.
The Flipkart page reports the battery capacity to be 3,700mAh, which is probably wrong since the official specifications page on Lava’s website reports it to be only 3,000mAh. I can't be sure..:silly:
AIRPLANE MODE IS NOT COMPLETELY WORKING DUE TO DEFECTIVE DRIVERS (CELL RADIO DRIVERS ARE PRESENT IN THIS TAB SO IT SEARCHES FOR DRIVERS CONTINUOUSLY AND FUC*S BATTERY UP!:crying There is a fix in the post
| SCREEN |:-:The front of the Lava Xtron+ holds a 7-inch sharp IPS LCD display having a resolution of 1024 x 600. It’s a bright screen and with a pixel density of 170 PPI, it is pretty sharp too. The best part about the display is that, despite being an LCD screen, it’s not a battery consuming monster. I always found its battery usage to be lower than processes. The screen is prone to scratches though and is highly reflective.
We can enable the biggest advantage of PC gaming in android now, i.e 4xMSAA in deveoper settings, makes gaming experience even better than tegra 3
Click to expand...
Click to collapse
Before starting i would say that i am not responsible if any guides here bricks your device ( it should not happen at all if u follow all steps properly as the chances of permanent brick of rk3066 is very slim but boot loop is a possibility) I made this thread to collect everything I've done in one place. This should make everything very straightforward and basically most probably n00b-proof.
| ROOTING | :-:
Pre Requisites-Working drivers (if not then no problem), OEM USB Cable, LAVA ETAB XTRON+, 2 windows apps and PATIENCE
{Screen shots of important steps is in the attachements}
(i) For Drivers download and install moborobo
HTML:
http://download.moborobo.com/download/Client/Moborobo(Moborobo_En_official).exe
(ii) In tablet go to in Settings >developers options and turn it on and enable USB Debugging & before connecting it to your PC go into the tab's
settings again and click on storage.In it you will find 3 dots in top right hand corner.> USB computer connection >Enable Mass storage
Note: DO "NOT" TURN USB STORAGE "ON".(When Connected to PC)
Note: Remove your external SD card before rooting.
(iii) Connect it to your PC and click on refresh and install/find drivers and it will download and install them..(there might be a security warning
about force install) Now, it may not recognize the model no, IMEI and other things and say that the device is JB7+ but the only thing you
should look for to make sure it is the right device is the total size and usage of internal Memory and NAND Flash..
(iii) Now drivers are securely installed and the tab is connected in the right way (there is no OEM (LAVA) drivers anywhere)
Download the zdm (Chinese software) in the attachments (For Every Step first see the screenshot)
Note:IT MAY INSTALL SOME USELESS SOFTWARE ON UR PC AND TAB , BUT IT CAN BE UNINSTALLED.
(iii)) When it detects the there will be something written like this in the bottom right corner :??ROOT : ONE or something like that (not in screen
shots as the tab is already rooted ) but it must be in green colour.This is the confirmation that the device can be rooted.
(iv) Now click on the Root Button in left hand side
(v) Click twice on green (thingy) first where it says ROOT then again for the confirmation popup (says something else but in green box)
(vi) Rooting Process has begun and the tab will restart (my PC is quite fast so it was almost instantly restarted and the Super SU was flashed it may or may not take 2-3 mins)
Note:IT WILL INSTALL SUPERUSER , WHICH IS OUTDATED BUT BEFORE DOWNLOADING OTHER SUPERUSER APP , USE THE ONE PRE-INSTALLED TO UPDATE SU BINARY.
DEVICE IS ROOTED WOOT! WOOT! you can also check by using Titanium Backup or root checker.
Mod Edit: Rooting method also described by Mohd.Anas here: http://forum.xda-developers.com/showthread.php?p=48776299
How to fix battery:-:
Get root explorer open system/app and rename phone .apk and telephonesomething.apk to phone.bak and telephonysomething.bak, you are good to go..
Also, you should change the WiFi scanning interval to 500 I.e 5 min as you really just require one scan when connecting to a known network..change the wifi supplicant scan interval to 500 build.prop
| CLOCKWORKMOD CUSTOM RECOVERY (GENERIC RK3066) 6.0.3.1|:-:
There are 2 methods one is tested by me(both are the same recovery created by the famous user "fun" at androtab.info), it works on our tab because when I opened the kernel.img with a hex editor (like Neo Hex Editor) the first line started with "KRNL" so I have a dedicated kernel in the kernel partition and I can just use the generic CWM. You can also follow this procedure just to be sure..make a online nandroid backup find kernel.img and open it up in pc in hex editor..
(A)METHOD TESTED BY ME
(i) Firstly you have to get the arctools apk,either by registering at their forum..
HTML:
http://www.arctablet.com/blog/forum/arctools-application/clockworkmod-cwm-recovery-easy-install-on-rk3066-and-rk3188-devices/
(ii) Click on download and select RK3066 CWM fun androtabinfo 6.0.3.1, there is only one option like that so it may or may not be in order.
(iii) Afer downloading click on install apps give i superuser permission and Voila! CWM.
(iii) You should also see the log right in the middle of the apps to verify that the flash and push thingy worked correctly with no errors
(iii) Select Reboot to recovery or Turn the tab off and press power button+vol up and the recovery should open
YEAH! YOU NOW HAVE COMPLETE CONTROL OF YOUR TAB
(B)METHOD NOT TESTED BY ME
HTML:
http://androtab.info/clockworkmod/rockchip/
(i) DOWNLOAD RK30GENERIC_CWM.zip from
HTML:
http://androtab.info/clockworkmod/rockchip/
(ii) Here are the different ways to flash this zip file
HTML:
http://androtab.info/clockworkmod/rockchip/install/
|CUSTOM ROM(s)|:-:
There is only one ROM which is worth flashing and even that might be slightly buggy..
Well, I don't recommend to flash a custom ROM here as they may have bugs like Wifi still if you want the following features
Auto Install Feature: This allows you to install apk's automatically on first boot, if you have the apk files located in a folder named autoinstall on your external SD card.
HTML:
http://www.freaktab.com/showthread.php?8910-Auto-APK-Install-Feature
Rooted with SuperSU
Debloated of all Lava bloatware
Google Play Store tweaks added to improve availability of apps
Init.d support
Busybox support
English language default (all other languages are still supported)
Boot screens by Tattman65
Flash Tool by Finless
Reboot app by Petrus
Here is Lava Xtron+ RileyROM 1.1
HTML:
http://www.freaktab.com/showthread.php?10688-Lava-Xtron-RileyROM-1-1
Complete flashing procedure in extreme detail is in the ROM zip file (it is a PDF file named first time user guide , very helpful)..Personally I have not flashed the ROM as I don't think it is worth the hassle and possibility of no Wifi...
PLEASE CLICK ON THANKS IF I HELPED YOU, IT REALLY MOTIVATES ME!:highfive:

Thank you.. I was waiting for a method to crack this tab.. Will comeback with result.

Ext4 support
Can somebody tell me if ext4 is supported or not, when i try link2 sd it says not supported but I am pretty sure that the system partition itself is Ext 4, (I'm the one who made the guide)

Try ext3. It will be supported.

Prince.Paul.K said:
Try ext3. It will be supported.
Click to expand...
Click to collapse
Well, I have tried it there are some problem in link2sd, but according to an nandroid the system and data are ext4 , I have set up everything in ext2 and would hate to do it all over again, is there a way to verify support of ext 3 or 4 acc to wiki, kernel above 2.6 support ext4 and the kernel here is 3.0... One more ting, when I tilt the tab, I think that something heavy is moving around inside slightly, probably battery should I ask for a replacement? I have 4-5 days remaining I bought from flipkart, I do have a complete SD and nandroid backup..
EDIT: in d/tracing events ext4 there is a file called enable and the value inside is zero should I change it to 1
I think I found out the culprit, the first partiton that I tried was ext2 so link2d created a script for that..now, when I try to use ext3 or 4 ..it still tries to use that same script..so I willl delete the script then try again...

Successfully Rooted..! Sorry for the delay..!

Bro how to stop the battery draining in stand by due to deffective drivers as u say . I cant find the solution in this thread

HTC.EXPLORER said:
....
DEVICE IS ROOTED WOOT! WOOT! you can also check by using Titanium Backup or root checker.
Mod Edit: Rooting method also described by Mohd.Anas here: http://forum.xda-developers.com/showthread.php?p=48776299
How to fix battery:-:
Get root explorer open system/app and rename phone .apk and telephonesomething.apk to phone.bak and telephonysomething.bak, you are good to go..
| CLOCKWORKMOD CUSTOM RECOVERY (GENERIC RK3066) 6.0.3.1|:-:
There are 2 methods one is tested by me(both are the same recovery created by the famous user "fun" at androtab.info), it works on our tab because when I opened the kernel.img with a hex editor (like Neo Hex Editor) the first line started with "KRNL" so I have a dedicated kernel in the kernel partition and I can just use the generic CWM. You can also follow this procedure just to be sure..make a online nandroid backup find kernel.img and open it up in pc in hex editor..
(A)METHOD TESTED BY ME
..../QUOTE]
ukstillalive said:
Bro how to stop the battery draining in stand by due to deffective drivers as u say . I cant find the solution in this thread
Click to expand...
Click to collapse
Click to expand...
Click to collapse

HTC.EXPLORER said:
HTC.EXPLORER said:
....
DEVICE IS ROOTED WOOT! WOOT! you can also check by using Titanium Backup or root checker.
Mod Edit: Rooting method also described by Mohd.Anas here: http://forum.xda-developers.com/showthread.php?p=48776299
How to fix battery:-:
Get root explorer open system/app and rename phone .apk and telephonesomething.apk to phone.bak and telephonysomething.bak, you are good to go..
| CLOCKWORKMOD CUSTOM RECOVERY (GENERIC RK3066) 6.0.3.1|:-:
There are 2 methods one is tested by me(both are the same recovery created by the famous user "fun" at androtab.info), it works on our tab because when I opened the kernel.img with a hex editor (like Neo Hex Editor) the first line started with "KRNL" so I have a dedicated kernel in the kernel partition and I can just use the generic CWM. You can also follow this procedure just to be sure..make a online nandroid backup find kernel.img and open it up in pc in hex editor..
(A)METHOD TESTED BY ME
..../QUOTE]
Click to expand...
Click to collapse
you can also change wifi_suppliant_scan interval to like 150 or so, the default value is very less "20" :good:
Click to expand...
Click to collapse

Going to fix battery
Sent from JB 7+ using tapatalk

nitinchamp said:
HTC.EXPLORER said:
you can also change wifi_suppliant_scan interval to like 150 or so, the default value is very less "20" :good:
Click to expand...
Click to collapse
Alright I know this is a stupid question but..Does it continue to scan when it is connected to a WiFi network..I have also disabled the network norification and enable WiFi optimization...and thanks for the tip..ideally you should only turn scanning on when you want to connect
Edit: added your tip to guide will clean it up when I will use pc
Click to expand...
Click to collapse

HTC.EXPLORER said:
nitinchamp said:
Alright I know this is a stupid question but..Does it continue to scan when it is connected to a WiFi network..I have also disabled the network norification and enable WiFi optimization...and thanks for the tip..ideally you should only turn scanning on when you want to connect
Edit: added your tip to guide will clean it up when I will use pc
Click to expand...
Click to collapse
it still does scan for networks to see what other networks are present
there was also another method to root this tablet which i found back in december mentioned here
Click to expand...
Click to collapse

help
bro i have installed riley rom for lava xtron + tab but now i came to know that wi fi hotspot is a major bug for this rom and the rom is actually the copy of stock rom so i want to flash the stock rom again but cant ,,, so plz help me i have the stock rom zip file , now what to do ?/
plz reply :crying::crying::crying::crying::crying:

ukstillalive said:
bro i have installed riley rom for lava xtron + tab but now i came to know that wi fi hotspot is a major bug for this rom and the rom is actually the copy of stock rom so i want to flash the stock rom again but cant ,,, so plz help me i have the stock rom zip file , now what to do ?/
plz reply :crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
Well you are familiar with cwm or do you even have it installed, if you do then just go to install zip from sd card and select the zip file...secondly if you have a cwm nandroid backup (recommended) just go to backup and restore select resotre or restore from externel sd and then select the date of the required backup file then click restore..If you do have a cwm nandroid backup then it MUST work...if you don't even have the recovery then, ist step is to install it through THE guide then, try to do the ist (not recommended) option...

I have cwm installed on my tablet but i dont have stock rom of lava xtron plus

ukstillalive said:
I have cwm installed on my tablet but i dont have stock rom of lava xtron plus
Click to expand...
Click to collapse
Did you make a nandroid cwm backup before flashing ROM?
Also can you make the account as soon as possible

CM10 for Lava Xtron +
nitinchamp said:
HTC.EXPLORER said:
you can also change wifi_suppliant_scan interval to like 150 or so, the default value is very less "20" :good:
Click to expand...
Click to collapse
http://www.slatedroid.com/topic/41777-romcyanogen-10-for-rk3066-wip/
Check this thread is it possible to flash this on lava xtron + . Can any1 reply plz
---------- Post added at 03:46 AM ---------- Previous post was at 03:43 AM ----------
I have installed cwm in many devices before but first time in my tab and bro i dont hqlave a nandroid back of my stock rom
Click to expand...
Click to collapse

ukstillalive said:
nitinchamp said:
http://www.slatedroid.com/topic/41777-romcyanogen-10-for-rk3066-wip/
Check this thread is it possible to flash this on lava xtron + . Can any1 reply plz
---------- Post added at 03:46 AM ---------- Previous post was at 03:43 AM ----------
I have installed cwm in many devices before but first time in my tab and bro i dont hqlave a nandroid back of my stock rom
Click to expand...
Click to collapse
Then just take a backup of the ROM you currently have installed (I think Riley) and if the CM doesnt work out, revert back easily..:good: Post your results here
Click to expand...
Click to collapse

Outdated MOFO IMG Computerfreek274_1.6 ,Pon-3V4A,PowerSave_11/7/15

With Sunshine unlocking droid Turbo Bootloader I will be moving on to making ROM's not just an img. please see my Forum on XDA here and my Website Computerfreek.com Here for more info.
I will continue to do MOFO support for the next month or so as users make the switch.
Computerfreek274_Turbo_lollipop (SU4TL-44)​
Also On my website Computerfreek.com Now has updated help and support how to setup stuff like adaway,Boot anamation, Dpi and more. Also I will be posting Pre-Released images there days be for there on XDA. There will also be images some custom images that will not ever be listed on here on XDA for I will not support them. So please check out the site it is still a work in progress but it is getting there. As of right now I did not get custom IMG listed and the newest ver is still 1.6 and it is listed below.
This Firmware upgrade to 5.1 SU4TL-44 from 4.4.4! VIA Mofo.
If you took the OTA 5.1 update you out of luck as you where told not to on here over and over. Go check out sunshine root maybe coming soon for locked 5.1 users.
If this software somehow kills your phone I am not to be held liable.
PLEASE BACKUP YOUR DATA 1st For the best speed and no bugs if you are coming from 4.4.4 for the 1st time I recommend that you backup your photos,music and other data. and when you get to step 3 wipe Data and cache. It is not a must but for me to give you support this is a must.​
Thanks to @firstEncounter for his great post and images. Thank you @mattlgroff for his help and everyone who sent me links to the OTA and Full ver.
Thanks to http://motofirmware.center/files/ for hosting stock lollipop IMG's so I an update missing or outdated system files I had.
Big Thanks for PON-3 Audio mod from @mrchezco1995 and his forum is here
Please support better battery stats and give a big thanks over on there forum here. The better battery stats companion app installed in 1.4 will only work with paid ver of bbs from google play.
Thank you guys so much.
Features:
Stable! - I don't publish images without exhaustively testing them. If you have any issues to report, reply to this post and either myself or the community will rally to help fix the issue.
Much better battery life! - This image focuses on battery savings without compromising performance. Your phone will last much longer while running this system image.
Multiple versions - Custom version from DPI dpi higher resolution to Custom fonts
Fast! - This image is lean, fast, and enhanced for performance.
No bloat! - All bloat that is available on the Play Store has been removed. Extra files (like help videos and help audio files) have also been removed.
Optional adblocking! - Adblocking via AdAway that can be toggled on and off.
Now with Pon-3 Audio/ V4A - Increase the volume and the quality of audio output from the Droid Turbo by enabling VIPER4Android which comes bundled in this system image.
Enabled for XPOSED Updated to newest ver. - This system image has been enabled for the XPOSED framework as well as includes BusyBox.
For better support I have removed old versions on here my focus is to have better support for all of you starting from 1.5+
Please Read! If your not on Kernel Version 3.10.40-perf-g90ddf4a Sept 1st 2015 Please Download and flash all .IMG files in this zip here. To find the kernel build go to settings > About phone. Most of you guys will need to update!
Computerfreek274_TurboPop_1.6 Update. 11/07/2015
Now With Turbo 2 Command Center. Screenshot
Download 1.6 Here
Change Log.
Updated .img files in 1..6 No need to download Img pack when upgrading from KK or to update your kernel,modem,etc... all files are updated 1.6 Zip.
Cleaned up some more junk from system
Updated some apps.
Removed music2 aka google music.
Samsung Sans Font IMg's has the IOS9 emojis.
Turbo 2 Command Center​
Download 1.5B Here Updated 10/16/2015 Base on SU4TL-44
Download 1.5 Here 10/5/2015
Custom fonts in 1.4 I will update 1.5 as needed.​1.4 Download Here.
All Files and IMG's files that are needed to install my IMG are Zipped with all my system images from ver 1.3 and up Just download 1.4 or 1.3 and unzip open the help file and do a step by step install.
Please Read 09/12/2015 For Android Pay support and Setup please see Post #3 ​
You can still download 1.3 and 1.3A here.
[/URL].
1.5B Change Log 10/16/2015.
Updated to SU4TL-44
Updated Xposed
Boosted overall audio and mixer profile updated
Fix Pon-3 audio buffer for large audio high bit rate files buffer from 32m to 48m
Few other tweaks also see 1.5 for more info. This has all the tweaks from 1.5 and 1.5 is the best battery and fast running ver to date.
​
1.5 Change Log 10/5/2015
Removed more junk like maps and stuff as you have updated ones from market.
Added for more Tweaks for faster GPU and CPU and more memory.
In call VOL boosted default was max 3 now max 10.
Better GPS.
Battery Seems much better with memory fixes.​
1.4 Change Log 6/12/2015
Android Pay Support Please see post #3 For more info.
Custom Fonts There will be 1.4 img with custom fonts. More to come check one of the last post for more info.
Some Of the changes listed here is from 1.3A
PowerSave Is in all from 1.3A and up.
Removed some more bloat.
SuperSU is the stable ver.
Xposed to newest ver Please uninstall your old xposed.apk be for you flash.
HDR Camera setting is fixed as of 1.3A
Updated some system files.
Tweaked GPS a bit for faster lock.
PON-3 updated
Fixed audio profiles for PON-3 to match are turbo for a more stable PON-3 audio.
Updated Mixer Profiles for better audio.
mixer_paths updated louder audio as we had in my ver of KK. 09/02/2015 I had to make a new one for Lollipop as the old mods did not work.
updated to work better with the turbo Pon-3.
There is now a set of 1.4 Pure/MAX IMG's also for none Verizon users only.
​
More help and support can be found on my website at Computerfreek.com for full install and updates Or read below.
How to install
See Post number 2. http://forum.xda-developers.com/showpost.php?p=61636340&postcount=2.
To setup DPI,Adaway and more.
To install system img via mofo see post 2.
Setup Adaway Install AdAway from Play Store. Run AdAway (don't download hosts files yet) and go to settings - preferences. Check 'allow redirections' and under 'target hosts file' select '/data/host Then go back and hit update host files.
Xposed In Pre-installed and setup just install the mods you like to use.
On Pon-3 V4A Open Pon 3 and check the sound devices you like to enable.
Setting up an custom boot animation place bootanimation.zip under /data/local/moodle/bootanimation.zip for more info or watch this small video on how to. https://www.dropbox.com/s/lom6zduant...rding.mp4?dl=0
For 493 Builds to fix the ambient display being off set you must install xposed MOD app settings found here or download it from inside of xposed. and set moto diplay to 640 DPI. If you need more help check the forums here.​

Flashing from KitKat to Lollipop
This is a nice well written guide by @Purpeltendire Thank you @Purpeltendire Thank you for this great guide.
If you are new or upgrading and need more help I updated help and info on my website also at computerfreek.com
Steps to flash from KitKat to Lollipop - This assumes that you're currently using a rooted KitKat image already, and have used mofo to get root.
BACK UP ANY DATA YOU DO NOT WISH TO LOSE.
YOU ARE ULTIMATELY RESPONSIBLE FOR ANY LOST FILES OR DEVICE PROBLEMS.
Make sure you have a good hour or two set aside, at the minimum. It’s probably not a great idea to try this right before work or class.
Install mofo, ADB, and fastboot on your computer if you haven't already. On Windows, I like using this for ADB/fastboot.
Download the image of your choice.
Download 5.1_images.zip. Extract the files, and put them into the same directory as fastboot. Next, boot into your phone's bootloader (turn the phone on by holding power and volume down), and flash each file seperately using fastboot:[/FONT]
Code:
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash radio radio.img
fastboot flash recovery recovery.img
fastboot erase ddr
Now open mofo_gui.bat, and flash the system image you downloaded:
Code:
mofo flash Your_imagename_here.img
Once that finishes, you want to try to boot the phone. Select Boot to System from the bootloader and then go grab a snack - chances are, it will sit at the Motorola boot screen for some time. After about five minutes, press and hold power to turn the phone off.
Next, boot into the bootloader again and select Recovery. You will likely get a "Dead Android" screen with "No Command." To bypass this, hold power and tap volume up (if that method does not work after a few tries, hold volume up and press power).
Now that you're in recovery, you're wiping both data (factory reset) and cache. Wipe cache first - this may take a very long time (20-30 minutes), especially if you've never done it before. Wipe data/factory reset second. If you're feeling paranoid, wipe everything again.
From recovery, boot to the bootloader. From bootloader, boot to system. This first boot might take some time as well.
Assuming all went well, you should see a Lollipop setup screen within 10-15 minutes. Congratulations!
Remember that your device is now in “like new and improved” mode. You’ll need to restore your apps and settings from wherever you backed them up to, and you'll still need to get the APKs for Xposed and AdAway. Again, nobody else is responsible for any of your lost data.
[FONT=Arial[/FONT]
For more help see Computerfreek.com

Android Pay Setup and Support. 9/28/2015
Update The updated android pay from google market is no longer working with root so if you flash back to an rooted img after setting up this one android pay will stop working.
9/30/2015
For Working android play and info please go to this forum I have made an IMG with tweaks and more here with working android pay.

Tomsgt said:
just talked with the dev behind moforoot and he said that mofo was patched in android 5.1 but he may look into other ways to get around it.
Click to expand...
Click to collapse
This was stated in another thread. I don't know if you heard, but I'm holding on that there's still hope. Is there still a possibility to be able to make a rooted image? I'm really hoping that we'll be able to have root with lollipop, but at the same time, I don't want you to put in all this time and effort for nothing.
Sent from my XT1254 using XDA Free mobile app

There's a lot of places with the ota, try one of them

Jaocagomez said:
There's a lot of places with the ota, try one of them
Click to expand...
Click to collapse
he needs the firmware img's

Michaelmansour1997 said:
he needs the firmware img's
Click to expand...
Click to collapse
Those will be released in the following days

Jaocagomez said:
Those will be released in the following days
Click to expand...
Click to collapse
noooo i need them today to fix my paperweight

Ahhhhh! I can barely wait!

Downloading the update NOW.. How do I get a dump and copy of the firmware OFF the turbo? Where is it located.. Using ES File Explorer to access /

MoPhoMike said:
Downloading the update NOW.. How do I get a dump and copy of the firmware OFF the turbo? Where is it located.. Using ES File Explorer to access /
Click to expand...
Click to collapse
I am far from the skill level of any rom creator but every google guide I've found seems to indicate root (even temporary root) is required to do a system dump. Is temporary root possible on the lolipop update? If theres another way, please post a guide @computerfreek274 so one of the people who has updated is able to easily help us out and get the ball rolling.

Correct me if I'm wrong, but can't you simply extract the system.img from the OTA zip using this method? http://forum.xda-developers.com/showthread.php?t=2497883

TheSt33v said:
Correct me if I'm wrong, but can't you simply extract the system.img from the OTA zip using this method? http://forum.xda-developers.com/showthread.php?t=2497883
Click to expand...
Click to collapse
Yes but I like to get ahold of a system dump. I been working on the ota today.

Pretty stoked!
Sent from my XT1254 using Tapatalk

siegesoldier said:
I am far from the skill level of any rom creator but every google guide I've found seems to indicate root (even temporary root) is required to do a system dump. Is temporary root possible on the lolipop update? If theres another way, please post a guide @computerfreek274 so one of the people who has updated is able to easily help us out and get the ball rolling.
Click to expand...
Click to collapse
If you Google it there was a way to do it without root. I do not care if it is a system.img dump like that. If you can just copy the system folder to your sd card i do not think you will need root for that use es file man and send it my way that will be great.

Want to make sure so if you have root via MOFRO then you should wait and not install the OTA and wait for new System Image from the Freek!!!

computerfreek274 said:
Yes but I like to get ahold of a system dump. I been working on the ota today.
Click to expand...
Click to collapse
Gotcha. Well unless someone has had luck with Kingroot (early reports said that it didn't work), I don't think that will be possible.
EDIT: Nevermind. It's totally possible. I'll try to track down someone who can get it to you.

computerfreek274 said:
If you Google it there was a way to do it without root. I do not care if it is a system.img dump like that. If you can just copy the system folder to your sd card i do not think you will need root for that use es file man and send it my way that will be great.
Click to expand...
Click to collapse
Pulling /system with adb should be easy and noob-proof.
Sent from my LG-E400 using XDA Free mobile app

TheSt33v said:
Correct me if I'm wrong, but can't you simply extract the system.img from the OTA zip using this method? http://forum.xda-developers.com/showthread.php?t=2497883
Click to expand...
Click to collapse
there are no system img's in the ota, its a flashable zip not an xml

Is this what we're looking for?
http://forum.xda-developers.com/droid-turbo/general/lollipop-5-1-coming-23-11-38-t3146663/page4
I have the restore firmware ... where should I host it?
VRZ_XT1254_SU2-12_12_1FF.xml.zip
Click to expand...
Click to collapse
http://forum.xda-developers.com/droid-turbo/general/droid-turbo-lolipop-firmware-t3147979

[HELP] Leagoo T5: why is not available any ROM ?

Hello
I've a Leagoo T5 wich use his own Nougat modifiied. TERRIFIC !!!
I'm looking for another ROM wich supporting all feature (also double rear camera and fingerprint reader) because it's impossible to use it.
T.I.A.
Paolo

You can use "MTK Extractor" to extract system.img and other files, you can then modify them, and flash them using "SP Flash".
I recently uploaded a clean stock ROM (LEAGOO_T5_OS2.1_E_20180116) to Mediafire and Needrom.
I've also uploaded a carepack if you are interested in the new ROM, or even for a custom.
The command for fast boot is: fastboot oem unlock

Ferather said:
You can use "MTK Extractor" to extract system.img and other files, you can then modify them, and flash them using "SP Flash".
I recently uploaded a clean stock ROM (LEAGOO_T5_OS2.1_E_20180116) to Mediafire and Needrom.
I've also uploaded a carepack if you are interested in the new ROM, or even for a custom.
The command for fast boot is: fastboot oem unlock
Click to expand...
Click to collapse
Do you mind sharing please? I'd love to get a working custom rom on this device.

I still can't add links yet, so you will have to Google search: "MTK Extractor". Download it, and then download the latest official ROM, which I have uploaded to Needrom and Mediafire, Google search: "OS2.1_E_20180116".
Extract the "system.img" file from the stock ROM using MTK Extractor, you can then go ahead and make your customization's. System apks are signed and locked, however they can be replaced.
When you have finished, you can use MTK Extractor to create a new system.img file with all of your modifications (including root, if you add it). The size for system.img is 4096mb.
The MTK Extractor tool uses a slider bar and text input for the partition size, the slider is limited, however enter 4096 into the text box (don't delete the text, it bugs).
Enter fastboot (Power + Volume up), third option, then using ADB with command prompt, type the command: "fastboot oem unlock", and then accept.
Now you have unlocked the phone, you can run your custom ROM. In a factory locked state, ROM's will install, but not run.

I forgot to mention my Needrom pack contains MTK Extractor. If you can make roms, there are 3 stock bugs that I would ask you to fix.
1: If the navigation bar is hidden, there is a window transition blip (bottom of the screen) if you swipe to recent apps.
2: If you select the first (bottom left) icon from the lock screen (voice, usually), you get a grey background.
3: Bluetooth scanning sometimes bugs (MAC instead of name), once paired there are no issues.*
* This may be due to my headset, but I remember my TV also displaying a MAC once.
Also, can you align or remove the 4G icon that shows even with data turned off.

Ok... So far this thread seems to be the only one on xda-dev about leagoo T5, which i just buy.
By the way thanks Ferather for pushing the rom on need rom.
Here the link :
https://www.needrom.com/category/leagoo/t5-leagoo/

Need help
Hi, could you please share the Mediafire link?

Since the last rom update (LEAGOO_T5_OS2.1_E_20180822 aka OS2.1_E_20181025) I post on needrom a moded rooted boot with magisk.

i have this leagoo t5 running this newest e_20181025 but im getting a problem with my front facing camera only displaying like an upsidedown image of the rear camera. please advise on what i can do to fix this

Maybe inconsistence between differents partitions (like boot and system)
If you know what you are doing I will advise reflashing all principal partitions.
But i don't think the phone came like this when new, so someone must have messed something.

https://www.mediafire.com/#3c2rnntnz3kw0
LEAGOO_T5_OS2.1_E_20181025.zip -- Original Leagoo T5 ROM
LEAGOO_T5_OS2.1_C_20181025.zip -- Custom Leagoo T5 ROM
No issues, other than the one I have mentioned, which is just an app default.
Enjoy!

hey cool rom bro.
Thank for sharing.

No problem, I thought I would start the ball rolling for customization of the rom, since adding ringtones does not work with the stock rom (media storage app issue I think).
You can permanently edit the rom yourself, which I found very easy. If you want to add apps, simply install them from sdcard or store, then navigate to "/data/app", you will find your installed app or update, with odex files and libs, if any.
I created a temp folder on "/data" called "Working" and copied everything into it, and then setup the correct permissions, and renames, and transferred to either "/system/app" or "/system/priv-app", depending on the app.
A better way to do it, is to use "Lubuntu" from live USB or DVD, and then mount the image and edit it as root: "sudo *file explorer*", in this case "sudo pcmanfm-qt", then create a folder in "/mnt" called "ROM".
Next copy "system.img" to "/tmp", and mount it "sudo mount /tmp/system.img /mnt/ROM", now you can do whatever you like, but make sure to "chown" and "chmod" all your modifications.
Make sure you delete anything you will replace when you transfer, else you might get old unused files (folder merged and non-replaced items remain).
----
If you make edits on the phone using an app, and want to make your own "system.img", use the readback option in "SP Flash Tool".
physical_start_addr: 0xe000000
partition_size: 0x100000000
----
Note: Most non-stock apps *do not* support the triple (3x) camera setup, and will either use the wrong camera or crash.

Yeah I encounter problems too to add custom ringtone and wallpaper but i manage to get over it by changing some files permissions
By the way I am "456456" on needrom, the boot img with magisk is from me
I know the time needed to make a custom rom and I'm glad to see that I'm not the only one trying to mess with this not-bad-at-all cheap phone

There is a possibility of an Oreo port, there is a Leagoo T8s with the the same chip that runs Oreo 8.1.0. I have checked over the rom and it looks possible (based on my basic knowledge).

Cygwin + Cmder, for Android. I made the pack myself, and thought it might help others using Windows who want various Linux tools.
I added Cmder for better console support and easy admin: ---- http://www.mediafire.com/folder/lzsf7xd2wwsm4/Commander
Quick update, will now self configure "/home", added ADB and Fastboot.

Ferather said:
There is a possibility of an Oreo port, there is a Leagoo T8s with the the same chip that runs Oreo 8.1.0. I have checked over the rom and it looks possible (based on my basic knowledge).
Click to expand...
Click to collapse
Hi, Running your ROM with no other mods, it's certainly better than original. Just curiousis there anyone working on an Oreo based ROM ?. ... J

Thanks, I did not manage to get the Oreo from the T8 to function, due to hardware changes.

Ferather said:
Thanks, I did not manage to get the Oreo from the T8 to function, due to hardware changes.
Click to expand...
Click to collapse
Ah !, C'est la vie, would have been interesting. Apologies for late reply was away from home and didn't have much spare time. ... Jack

please tell me how you can fix the inverted touchscreen Leegoo T5