Database Info

[ROM] (Flytouch 2, SuperPad, WWE10) 2.2 v2.1 #3925

Thanks to kiodo1981 for bringing this to us so quickly
Click to expand...
Click to collapse
THIS ROM MAKES THIS PAD ROCK NOW
For now its back to using IUW to do either one of the versions..
you will also need to have done a U-BOOT-NAND upgrade at some stage.. and need to be showing at least uboot - 0.6.1.5 (587) at bootup at the right hand bottom of our screen.. if you dont have this then you will need to do it..
1: Here's a new link by Smarkies that has a great pictural step by step flash guide
http://forum.xda-developers.com/showthread.php?t=1074251
2: This is the new Flashable via SDcard 2.2 v2.1 thanks to vihtor
Originally Posted by vihtor
Try this one: depositfiles.com/files/dqp3xdrcg
But i am not sure that this ROM compatible with all uboot's.
Click to expand...
Click to collapse
instructions.. thanks to Jiggity Janx
CONFIRMED #3925 2.2 v2.1 bootable sd install. One step process. Great job!
(for those wondering I have 6.1.5 (559) uboot so any at that or later should be allright)
EDIT: IF you have at least 6.1.5 (559[or higher]) showing on the Infotmic screen when booting you should be able to 1) download the .img file at the link above, 2) burn the .img file to an sd card using win32diskimager (or winhex), and 3) insert the sd card into slot between 2 usb ports while booting to update to 2.2 v2.1.
PS Not only does camera still work clearly for me on 559, camcorder records now.
Click to expand...
Click to collapse
3: Ramdisk work around
http://forum.xda-developers.com/showpost.php?p=13974529&postcount=58
read posts from about 55-58 on Smarkies, why it is a good idea to re-flash the ramdisk
other versions if you have no success with the one above....
here's a link to the files you need.. iuw1.1-english
http://www.fileserve.com/file/taD2UBA
plus instructions..
http://www.fileserve.com/file/6Hn9ytR
Use IUW to make a bootable sdcard.. this is first version.. still stable, it is posted for those that dont want to go straight in to flashing a unwrapped image file.. if you use the instructions you should be able to just dump/flash this to your usual bootable sdcard.. stick it in the top slot and it will upgrade to this version.. no usb needed.. (note.. you will still have needed to have upgraded your "u-boot" at some stage... read further down for this..
ROM 2.2 V1_8
http://www.b2cus.com/software/WWE10B_Android_2_2_V1_8_U0M_GT2005.rar
2ND VERSION -
Warning - be slow and sure about what you do here.. you can brick your pad if you burn the wrong files... you have been warned..read the other threads before you do anything.. and have the opened IUW instructions with the pictures if you are unsure...
1st use one of these...
uboot - 0.6.1.5 (587)
Originally Posted by l33tlinuxh4x0r My uboot - 0.6.1.5 (587) http://www.mediafire.com/?bv4ixzeq34q5bi7
Click to expand...
Click to collapse
confirmed working and Roots for me ---- But no Camera for me
or
Uboot - V 0.6.1.2(587)
thanks to veryjo http://www.android-hilfe.de/attachments/apad-gf-10-flytouch-2-forum/31799d1302373904-installationsanleitung-flytouchii-froyo-2-2-stragulus-u-boot-nand.zip.zip
Click to expand...
Click to collapse
Confirmed working, Roots and camera for me working
MAIN ROM FILES
Originally Posted by kiodo1981
2.2 v2.1 #3925 http://www.b2cus.com/software/flash10.1-android2.2.rar
Click to expand...
Click to collapse
Confirmed working and "ROOTED" yeha.
Confirmed that it is 2.2
we need one of the guru's to pack it into a bootable sdcard format now.. for the mases..Urgently so we don't get too many bricked pads
ROOTING
Thanks to Barsuk..
Root with launcher pro only. Into launcher pro adding activity "Development" to desktop and use it then z4root.
Click to expand...
Click to collapse
or
Universal root - seems to work for me
Click to expand...
Click to collapse
Jogor said:
Working and rooted.
I installed #3656 first and skipped the UO file when installing this and everything worked great. I installed the newest UO 0.6.1.5 () too and root seems to work after that too.
What I really like with this release is that swedish language is included (was missing in all updates after 1623) and ofcourse that it's Froyo!
To get Titanium Backup to work you will have to copy your old TitaniumBackup folder from the SD card to the new created when you installed TitaniumBackup, after that TitaniumBackup will find all your backuped apps.
It seems like both Flytouch2 and Flytouch3 are at version #3925, maybe the are compiling new versions for both pads at the same time now, so we can count on a new version when Flytouch3 gets one?
Click to expand...
Click to collapse
NOTE: do not use the update software on the pad even through it says there is an update available.. it will take you back to firmware: 2.1-update1 V1.8#2752
kernel version : 2.6.32.9

reserved
reserved for more info
Bugs so far.. will update as the forum grows so that we have a reference page at the front.. saves a lot of reading later if this grows too much..
Please report your bugs and we can get people to work out fix's for you..
1: Ndrive does not work in this version
2: Small amount of people experience has Wifi connection/dropout problems - yet to find a fix..
Also no confirmed tests on Ethernet connections as yet - will confirm once we get some feed back - I am in Singapore airport and wasn't able to use the the Ethernet plugin for net.. so will check it out over the next few days as I will be in different Hotels so can test connections on the road
3: No apps2sd --- hope some one smarts finds a work around.. it would be killer if we could redirect some of the apps to see the SD1
A note on this...
in 2.2 V1.8 the file structure is sdcard local ram storage.... and ... SD1 - sdcard storage.. and SD2 -
in 2.2 V2.1 file structure is Local ram storage... and SDcard 1 and 2
both are locked in to using the local partitions for program storage and program data storage..
Which is a shame as things like ebooks and heavy graphic programs it would be nice to send the storage to SD1 or 2
This is fixed.. look at Smarkies thread for work around..http://forum.xda-developers.com/showthread.php?t=1074251
4: Synchronization contacts and google calendar - Mixed bag on this one.. some get it some don't...might be a cache thing..
Fix once again provided by Barsuk .. check posts from Capeschae and Barsuk for fix.. they are from posts 121 pg13 - 126 pg 13
5: Paid Market apps - This is because of the China location block from Google more on it http://forum.xda-developers.com/showthread.php?t=551929&page=3
there seems to be a fix thanks to Barsuk..
Problems with market. Not all applications are available. Workaround: clear data for Google Services Framwork then force stop it then reboot tablet.]
Click to expand...
Click to collapse

In this rom i see one bug. I am can't explore my SD card that content two partitions - Linux swap partition and FAT partition. After remove the swap partition, i can see the card in file manager.

I have to thank for this link www.b2cus.com/software isergio

vagros said:
In this rom i see one bug. I am can't explore my SD card that content two partitions - Linux swap partition and FAT partition. After remove the swap partition, i can see the card in file manager.
Click to expand...
Click to collapse
Yes..I had that problem too..as tried to set a cache Linux as well..had a God arwful time with it..I think it is something to do with how they have setup the drives for the internal ram on the pad..
Hopefully one of the guru's will grab this then work out how we can get real apps2sd..then we will be laughing..
Sent from my warm evo using XDA App

Originally Posted by kiodo1981
2.2 v2.1 #3925 http://www.b2cus.com/software/flash10.1-android2.2.rar
Click to expand...
Click to collapse
I installed this official Froyo too. It's very, very fast, more than all the different firmware tested from here!
Some remarks/questions:
- The camera is not working anymore, the preview screen shows green or sometime other colors...
- A lot of apps are pre-installed, meaning that it is impossible to update them (Dolphin Browser, Skype, Facebook etc...)
- Is it possible to install Flash Player on it? Will it work? Does anybody tried?
- Is it possible to overclock the Flytouch2 with this rom? Is the kernel overclockable?
Thanks,
Tuc

Tugdu77 said:
I installed this official Froyo too. It's very, very fast, more than all the different firmware tested from here!
Some remarks/questions:
- The camera is not working anymore, the preview screen shows green or sometime other colors...
- A lot of apps are pre-installed, meaning that it is impossible to update them (Dolphin Browser, Skype, Facebook etc...)
- Is it possible to install Flash Player on it? Will it work? Does anybody tried?
- Is it possible to overclock the Flytouch2 with this rom? Is the kernel overclockable?
Thanks,
Tuc
Click to expand...
Click to collapse
i can help for the camera-problem...
install after installing FW this Uo: http://www.android-hilfe.de/attachm...uchii-froyo-2-2-stragulus-u-boot-nand.zip.zip
now the camera works

how to install this update without usb cable?

more stable
Thank you very much for the firmware much more stable, it does not freeze as V4 and V5 when used continuously.

Help wifi
Hi,
I have installed this new firme and i have a problem with the wifi. You turn off continuously and lasts very little connected. I have configured with fixed ip and wpa encryption.
Does anyone know if there is any way to solve it?
Thank you and a greeting.

Thanks to Isergo
kiodo1981 said:
I have to thank for this link www.b2cus.com/software isergio
Click to expand...
Click to collapse
Yes, I would like to thank "Isergo" too for making this public..
A clean fast Rom forsure..
@veryjo - have you got a version number on this U-boot-nand?
Anyone else confirm it works before I flash it..
@patosoft
I am running Wifi with WPA/WPA2 PSK with Auto i.p.. no problems
been downloading and streaming with it..
@Asiaa -- use IUW to make a bootable SDcard for the 2.2 1_8 version
http://wwe10b_android_2_2_v1_8_u0m_gt2005.rar/

After installed 2.2 v2.1 #3925 I found two bugs
- The camera does not work properly. I fixed the camera by replacing u-boot-nand.bin. Currently I have version 0.6.1.2 (587)
- Failure to sync contacts and calendar.
Market and Google Maps in this version work properly.

dgcruzing said:
@veryjo - have you got a version number on this U-boot-nand?
Anyone else confirm it works before I flash it..
Click to expand...
Click to collapse
the Uo is version 0.6.1.2(587)
perhaps you have memories of the fw 2852. this fw had camera-problem too

not able to root
This verision is awesome, having problems rooting it, have tried z4root and universal android root also, anyone have a solution for this. also having problems with market, not showing alot of apps, mostly Chinese and no google navigation

I used UniversalAndroot-1.6.2-beta5. The first time did not work the second time worked.

Hello,
Thank you for answering me. It is true that by dhcp works perfectly, but prefer to solve the problem and leave it in static. Anyway with this solution, I better to work with the epad and already ire sought a way to fix it.
A greeting and thank you

After trying a few flash websites, I noticed that Flash Player is ON BOARD in this Froyo ROM!
But colors are something between colored and black&white...and crash in fullscreen mode.
The colors issue has been fixed on the new Flytouch (512Mb RAM) - the following quotation from Androidtablets.net explains how to proceed:
Flash Player issues RESOLVED - new flash player .apk
I have tested this on my ft2v2 with TCH rom 0419, and it mostly worked! Flash now played with correct colours and almost no lag once buffered. It did however crash when I attempted to go full screen, so not perfect yet. Opera mini and Maxthon Browser use the youtube app for youtube website if you have it installed. This works excelently. Flash worked well on other flash websites, I tried an emag site and it loaded where it would not before.
Here is the new apk: Adobe flash for flytouch3.rar (Thanks koti)
Password: koti
Install:
1) use Root Explorer to rename file \system\app\install-flash-player.apk to .old
2) Reboot Flytouch
3) Install the above .apk
I tried youtube and also some eMag sites.
NOTE: This is now included in Tim's ROMS 3b and 3c.
NJoy!
Last edited by Chandos; 05-02-2011 at 05:21 PM.
Click to expand...
Click to collapse
I tried to find the file \system\app\install-flash-player.apk but it doesn't exist in our 256Mb Flytouch...so I directly installed the new Flash Player from the link above but nothing changed with the Flash videos colors, even after a restart.
Does anyone know how to properly install this new version of Flash Player???!!!
Tuc

I rectified,
Still failing me the wifi. Automatically I hold a more function, but is still cutting. Before I had the firm 3245 and it worked fine. So I'm going to return to this firm.

"Confirmed that it is 2.2
we need one of the guru's to pack it into a bootable sdcard format now.. for the mases.."
That would be good - waiting patiently

caravanman said:
"Confirmed that it is 2.2
we need one of the guru's to pack it into a bootable sdcard format now.. for the mases.."
That would be good - waiting patiently
Click to expand...
Click to collapse
Try this one: depositfiles.com/files/dqp3xdrcg
But i am not sure that this ROM compatible with all uboot's.

LY-F1 ICS 4.0 update instructions and download links

This is a way to update to ICS 4.0 with a majority of the program working on your tablet, this is not the manufactures firmware so I am not responsible if you brick your tablet. I do not take credit for any of these downloads, this is just a compilation of all the best ones I could find to make this process easy and work as best as possible.
This process is very simple especially if you have already run the factory firmware update on your tablet.
Known not working:
The physic buttons at the bottom of the tablet (home, menu, and back) will not work with this firmware but can be worked around with an app download called Button Savior.
Netflix for me has been a black screen with sound working, haven't really worked on a fix for this one yet.
Auto rotate does not seem to work either so I would recommend just turning it off and letting the programs you run decide which way the screen should be.
Here is a list of the things you will need in order to do the firmware update to 4.0 including links:
Link for Production Software to push new firmware to device.
http://www.lyxfsz.com/cn/downs_view.htm?id=30
momo9 ICS 4.0 Update
http://narod.ru/disk/37649199001/MOMO9C-4-Kevin.rar.html
Scritps for working market place.
http://api.viglink.com/api/click?fo...ownload link&jsonp=vglnk_jsonp_13268322030251
Link for downloading pdanet for the usb drivers to work with ADB
http://junefabrics.com/android/download.php
You will also need android sdk downloaded in order to run the scrips to have a working market through ADB shell.
To make this process run smoothly you will need to rename the .img file and .key from the momo9 update file to the following.
a710-v0.5.1.img
proxypid1_solution_net_141516D2-8AC7-4a7a-8D0A-1E49BE70842E.key
Once you have the the necessary downloads complete, the process is very simple.
1.Turn your tablet off and run the firmware update software on your computer. You will re-name the .img and .key files as stated earlier and load them into the software.
2. You will now press start on the program and on your tablet you will now put a small pin in the bottom of the tablet in the hole to the right of the mini hdmi port (this will prompt the tablet to receive the update) and now connect the usb cable and release the pin once usb cable is connected.
3.Once the update is finished you will need to disconnect the usb cable and restart your tablet.
4.Once tablet is restarted you will need to run the PDAnet download and install the software on to your computer and tablet. This will let your computer recognize your table so that ADB shell can now program your tablet.
5.Once PDAnet software is installed you may now run the scripts to have working market. This process is very simple and quick, all you have to do is double click on the .bat file and it will do the rest for you.
6.After the scripts run your tablet will automatically restart and you are almost done. There is only one more app you will need to download from the market in order to make this fully functional. The physic buttons at the bottom of the tablet will no longer work so you need to download an app from the market called Button Savior and set that up on your tablet. This app will take the place of those buttons.
If you have any questions or if I have left something out please let me know and I will get back to you asap.

thanks
Thanks for the useful info and step-by-step instructions.
What i'm wondering is if you feel there are any performance improvements from the upgrade. For instance, do you feel like the UI is any quicker compared to 2.3? I'm fairly happy with the stock setup, but faster is always better.

Yes I do feel the UI is much faster the 2.3 and also less performance draining due to minimal visual effects on transitions. Also it is more direct then 2.3 with the menus so it is easier to get around with.

and there are no other issues with this besides the capacitive buttons?
camera?
usb?
sd card?
wifi?
it's just odd that firmware for a different device would work so well with this one. The novo 7 elf has myriad issues, and that's with stock firmware designed for it! I guess it pays to have such similar hardware.

Yes everything worked fine with it other then the few things stated above. Yeah it is weird to have a firmware from a totally different device work so well. I figured that maybe the display or the touch screen would't work for starters, but bam right after install, almost everything worked great, and after work arounds there wasn't anything I couldn't do with it. I cant wait for the factory ICS to come out so we can start modding it to port over a new rom.

isnt there a way to remap the HW buttons?

Yeah that's definitely a possibility. If only I could open up the firmware image from the factory firmware or even better make a back up of it, then it would be easily edited.

What about this :
1. Fire up adb
2. Edit the key mapping file /system/usr/keylayout/sun4i-keyboard.kl
Click to expand...
Click to collapse
orig. post by : andropos
I read that in a diffrent forum

There is a new FW from the manufactor
http://www.lyxfsz.com/cn/downs_view.htm?id=34

what are the changes? its still GB 2.3.4.... The tag says F1+ - so is it really for ly-f1? anyone tried to flash it?

I updated with live suite ( windows 7 x86)
http://www.lyxfsz.com/cn/downs_view.htm?id=34 <-- this version
Its work, I dont really know what the different , Because I didnt really used the old FW .

NEW Firmware ICS 4.0.3
http://www.lyxfsz.com/cn/downs_view.htm?id=37

That link it's not working anymore. Does anyone have an alternative link for LY-F1 ICS 4.0.3 firmware download?

That link never worked, you have to email them to get the links.
4.0 firmware
http://115.com/file/dp58vfhu这个是固件下载地址！
live suite for the firmware upload to your tablet
http://115.com/file/anf50cd1#这个是升级工具！

Faster link
4.0 firmware
http://www.mediafire.com/?ut8hbq48noaa9y9

Thank you!

Anyone has already installed ICS 4.0.3 from manufacturer site?
Any info on known issues with this firmware would be appreciated.
Info about improved performance would be great aswell.
Thanks in advance

releaser said:
Anyone has already installed ICS 4.0.3 from manufacturer site?
Any info on known issues with this firmware would be appreciated.
Info about improved performance would be great aswell.
Thanks in advance
Click to expand...
Click to collapse
Anyone with any info?

releaser said:
Anyone with any info?
Click to expand...
Click to collapse
I have dvc z7 - its a clone of ly-f1.
i install ics from official site.
Keys isnt work only - it isnt problem for me.

[email protected] said:
I have dvc z7 - its a clone of ly-f1.
i install ics from official site.
Keys isnt work only - it isnt problem for me.
Click to expand...
Click to collapse
Thanks for the info.
Wondering if it's possible to put the .kl file from original firmware in ICS usr/keylayout folder and make it work.

FaaastJB v2.5 running on Point of View Mobii 703

As those of you who own this Point of View (another chinese A 13 tablet) know, the stock 4.1 JB rom which the tablet
ships with is very slow (close to unusable if you ask me). I wonder what these chinese people actually did to the stock
rom to make it go so amazingly slow...
Here is a quick fix for those of you who would like to have a faster experience
This instructional assumes you have installed your USB drivers and have a copy of ADB.
1: BACKUP YOUR ROM (or you can find on the Point of View homepage)
2: Follow the instructions at A13 ROM JB 4.2.2 + DRIVERS and install FaaastJB v2.5 (4.2.2).
Once installed, and after first time boot, your touchscreen, camera and gsensor will NOT work. Leave the tablet on.
3: Download the attached file (TS drivers, modded script.bin and cfg files) or from this installation link.
4: Unzip the file to your ADB directory.
5. Connect your Point of View Mobii 703 via USB and execute the 'run.bat' that came with the TS modules.
6. Your tablet will reboot.
7. Congratulations! You have a fully working tablet with a much faster rom!

Working Stock P703 CWM for Faaastjb 2.5 ROM
The CWM that Faaastjb 2.5 ROM comes with is incompatible with the Point of View Mobii P703.
That is, if you reboot into recovery, you will be stuck in the dreaded CWM bootloop.
The attached file contains the CWM recovery partition image from the stock P703 JB 4.1 ROM.
This CWM works OK with the FaastJB 2.5 ROM. It does not contain as many functions as the
Faastjb CWM, but at least it works..
This instructions assumes you have installed your USB drivers and have a copy of ADB.
Instructions:
1. Your tablet must be in USB debug modus (Settings | Developer options).
2. Download and unzip the attached file to to your ADB directory.
3. Connect your Point of View Mobii 703 via USB and execute the 'run.bat' file that came with the files.
4. Follow the onscreen instructions. The recovery rom will be copied to your sdcard and flashed to the recovery nandg partition.
5. Your tablet will reboot.
If everything went well, you will have a working CWM, which makes running the Faastjb 2.5 ROM on this tablet a
more complete and safe experience.
Updated 02.01.2016. New download link added (fill in .com after megafileupload below for link to work, rules on the board..)
megafileupload/mzhY/Bluebyte9001_P703_stock_recovery.zip

first thanks for this rom but is it posible to install ics 4.0.4 on this tablet i think it would be faster if you can find img for ics and post it thanks

I have the CWM issue..
but seems the attached file you had is deleted? I need it!!
POV Mobii 703 with faaastjb and can't flash back to stock rom anymore because of clockwork issues

It seems that there is no way (with online files) to rooting a mobII p703 or are they?
My wife bought this for holidays, but the stock rom is arkward slowly. Changed the launcher with sicksky but it didnt help.
The baidu crap cant be deleted too. Thanks for any help.

Mobii 703 problem!!
My tab k.o.
ts modul run bat, and start device and only pont wiev logo.
do not going. recowery mod no.
HELP ME!!!!!! Thank.!!!

Please Help- Need the files
Hi bluebyte9001,
I also get the CWM bootloop.
But I can´t find the atteched files from your secound post.
Do you already have the files an can send them to me?
Thanks

susko25 said:
first thanks for this rom but is it posible to install ics 4.0.4 on this tablet i think it would be faster if you can find img for ics and post it thanks
Click to expand...
Click to collapse
I am sorry, but my 703 tablet is now broken (physically), so I have no way to develop more roms for this tablet.

haeuptling1977 said:
Hi bluebyte9001,
I also get the CWM bootloop.
But I can´t find the atteched files from your secound post.
Do you already have the files an can send them to me?
Thanks
Click to expand...
Click to collapse
Sorry for the late reply. I found the cwm after some searching around. See updated download link.

modnoo said:
I have the CWM issue..
but seems the attached file you had is deleted? I need it!!
POV Mobii 703 with faaastjb and can't flash back to stock rom anymore because of clockwork issues
Click to expand...
Click to collapse
Sorry for the late reply. I found the cwm after some searching around. See updated download link.

Visurox said:
It seems that there is no way (with online files) to rooting a mobII p703 or are they?
My wife bought this for holidays, but the stock rom is arkward slowly. Changed the launcher with sicksky but it didnt help.
The baidu crap cant be deleted too. Thanks for any help.
Click to expand...
Click to collapse
I am not aware of any online way to root the Mobii p7903. Did you try to flash my ROM? It is faster than the stock ROM.

links request
Hi, can you please update the links for TS drivers and CWM, or send the attached files to me?
Either way!

[ROM][SCREENSHOTS][ACER ICONIA B1 SERIES][5.0.1]Lollipop ROM For Acer Iconia B1

Hey guys.
I'm currently working on a Lollipop ROM For 7" MTK Acer Tablets. (I'm currently using the B1-720 as the 'Testing Tablet.')
FEATURES...
-Being based off Xperia Z4 Tablet LOLLIPOP
-Z3+ Boot Animation
-Lollipop UI (with its own unique touches.)
-Lots of Lollipop Animations. (Ripple Effect, App open Animations, Listview Animations etc.)
-Animations and Apps ported from other ROMS.
-...and much more.
I was going to make a Marshmallow 6.0 ROM, but the Project fell right on its face. Lollipop is much easier to work on.
And BTW I'm sorry for posting this into on the General Forum section. Since there isn't an Acer Iconia B1 Forum, I had to post it here. Any quote movements won't bug me at all!
Compatibility list:
Fully Working Devices:
Acer Iconia B1-720
Devices that may use this ROM but DOESN'T support the build.prop and SystemUI.apk in the ROM.
Acer Iconia B1-730/HD
Acer Iconia b1-750
Acer Iconia B1-770
Acer Iconia B1-710
Other Devices that MAY work with this ROM.
Acer Iconia A-Series Tablets
Other MTK based Acer Tablets
Other Android phones running Android Kitkat
Oh Yeah and If you want to see Progress videos of the Early ROM in action on the B1-720, then click on this link: https://www.youtube.com/playlist?list=PL2WiOdCyolCAua6FClkgBrO3UlDZYnW2s
UPDATE 12 MARCH 2016!!!
Hey guys. I've got great news. The ROM is done and ready to be downloaded! Remember: THIS IS NOT A FLASHABLE .ZIP ROM PLEASE DON'T TRY TO FLASH THIS VIA CWM, TWRP, OR ANY OTHER RECOVERY! Instead, extract the zip file folders and files using a trusted app such as Root Explorer and follow the steps giving in the _READ_THIS_TEXT_FILE!.txt file given in the ROM.
REMEMBER: this is a 80% DIY ROM with giving files and Apps to be manually installed by YOU! Don't try to flash this via CWM!
Steps:
1: Extract the zip file with Root Explorer.
2: Open the _READ_THIS_TEXT_FILE!.txt file and read for more steps.
3: Enjoy!
All apps and files given in this ROM is owned by their respectful owners!
Enjoy!
DOWNLOAD LINK
https://www.dropbox.com/s/589mm9hroosq4ox/LOLLIPOP_5.0.1_ROM_ACER_ICONIA_B1_SERIES.zip?dl=0

Would this work on a B1-730?

ctyndall77 said:
Would this work on a B1-730?
Click to expand...
Click to collapse
Yes. Perfectly. Just don't flash it; extract the files and follow the steps. The build.prop file may not work on your tablet, but apart from that, everything else should work prefectly. Thanks! ?

Brandon Nel said:
Yes. Perfectly. Just don't flash it; extract the files and follow the steps. The build.prop file may not work on your tablet, but apart from that, everything else should work perfectly. Thanks!
Click to expand...
Click to collapse
What exactly does the build.prop file do?

ctyndall77 said:
What exactly does the build.prop file do?
Click to expand...
Click to collapse
Changes RAM limit, Android version in settings, ROM name, Pixel Density etc. Only use the build.prop file if you have a B1-720 though!

Is it best to start out with a factory reset before copying the files to where they have to go? This will be my first time applying a different rom by not flashing and just want to get the steps done right.

ctyndall77 said:
Is it best to start out with a factory reset before copying the files to where they have to go? This will be my first time applying a different rom by not flashing and just want to get the steps done right.
Click to expand...
Click to collapse
Yes I recommend starting from the start then installing and moving all the files for the most amount of space on your device to install these files. In future updates I will provide updated apps and maybe a flashable ROM which can be flashed using stock recovery!
And if your using a B1-730, don't use the systemui.apk or odex. This will leave you with a black nav and status bar.

One last question. Is there a certain order to apply the files or not?

ctyndall77 said:
One last question. Is there a certain order to apply the files or not?
Click to expand...
Click to collapse
I recommend going in this order:
1: Install normal apks
2: Installing root
3: installing xposed apks and xposed installer it self.
4: Open the boot animations app and choose the cm12 boot animation.
5: Apply wallpaper
Then the rest if there are any more files.

If I Have A B1-710 With Android 4.1.2 I Can Use This?

Hugo Salce said:
If I Have A B1-710 With Android 4.1.2 I Can Use This?
Click to expand...
Click to collapse
Yes you can use 90% of this ROM woth your device. Use all of the files given in the ROM except for the SystemUI. Sorry for late reply
Sent from my D6503 using XDA-Developers mobile app

do you have a step by step guide for this?

On my acer b1-730hd 3g modem Huawei doesnt work on android 4.4.2 because it doesnt support Data usage or mobile data. B1 doesnt have opcion on/off... Does Lolipop 5 support 3g modem?

currently the link is broken
it will not work

Hi ! The link in OP seems to be dead. Is it possible to refresh it? This ROM could save my tablet, my only hope!

malar413 said:
Hi ! The link in OP seems to be dead. Is it possible to refresh it? This ROM could save my tablet, my only hope!
Click to expand...
Click to collapse
Snap. I'm hoping I can use it to cure the curse of losing wifi passwords on a B1-730.

I have acer b1-750 and I can't format it when I want to go to recovary mode I get this in my tablet
Entering Dnx mode.
waiting for fastboot command...
Help me plzz

This is a modified version of Kitkat.

Is this ROM available for download somewhere else?

@Brandon Nel, could you add a link again?

Complete Guide to Root and Update Samsung Galaxy Tab 10.1

Hi all.
Complete noob here - just wanted to document my journey for resurrecting my daughter's Samsung Galaxy Tab 10.1 tablet to make it usable again.
It had stock rom on it (android 4.0.4) ICS and would not update. Consequently, none of the apps were working and basically it was ready for the trash.
Yes, it's 7 years old, but hey, why throw it in the trash - I thought I'd have a go at rooting and updating. It took me a couple of days but now it's done, it's updated to 7.1 Nougat and working flawlessly.
So here is my Journey - I hope it will help someone. Big thanks to all the Devs out there who have put countless hours into keeping this tablet alive (especially decatf who appears to be very nice person
This assumes no prior knowledge - but be warned - I am not responsible for any damage you cause to your device or if you "brick it". If that worries you do not proceed! By following the below guide, you will be wiping all data from your device so proceed with caution!!
The following worked for me to install Android Nougat on my device - mine is a GT-P7510 but I used the files for the GT-P7500 because when I tried the specific files for the P7510, they didn't work). You might have to get creative here and there to get yours to work!
1) Create folder on your PC / Mac computer desktop to put the required files in;
2) Download the files from here:
- Odin3-v1.85.zip - or do a search for it (this will be for "flashing" twerp onto your device)
- twrp311-20171009-p4.zip
- aosp-7.1-p4-20171005.zip
- P7500-open_gapps-arm-7.1-pico-20170416.zip
- GalaxyTabHacks.com_SuperUser.zip
- USB drivers if you need them are here: http://gizmoword.com/Files/2017/09/24/samsung-usb-drivers/
3. Instal Twerp / Custom Recovery
Before you can install custom software (Nougat etc) you will need to root the tablet. Before you root the tablet, you need to install TWERP which will allow you access to things like backup and recovery etc.
To install TWERP follow this guide and ensure you make backup before proceeding to step 4 - that way you can always go back to your stock image if there are any problems.
https://theunlockr.com/2012/05/11/h...od-recovery-on-the-wifi-only-galaxy-tab-10-1/
NOTE: in the above, it mentions ClockWorkMod (CWM) - However CWM did not work for me, so after installing CWM - I then installed TWERP (they basically do the same thing). I am not sure if you can simply install TWERP instead of CWM - but I installed TWERP over the top of CWM after I had followed the above guide.
4. Root the tablet: The following guide was very helpful to me;
https://theunlockr.com/2012/05/18/how-to-root-the-wifi-only-galaxy-tab-10-1/
and / or this one:
https://forum.xda-developers.com/showthread.php?t=2361571
5. Now you should be ready to install the custom ROM (Nougat)
Follow these guides:
https://www.droidword.com/2017/11/2...10-1-gt-p7510-to-android-7-1-nougat-aosp-rom/
and here is the source code and infos;
https://forum.xda-developers.com/galaxy-tab-10-1/development/rom-android-7-0-nougat-t3471350
6. After following the above, I installed Gapps Pico (very small google basic apps needed for tablet boot e.g. playstore etc)
7. Reboot device and enjoy the setup. Congrats - if all went well you should now be on 7.1 Nougat and can download all your favourite apps.
You can also download and install other software e.g. Chrome browser optimised for your old tablet
https://forum.xda-developers.com/ga...t/app-chromium-m56-optimized-tegra-2-t3550210
Best of luck! Note - I am not developer of any of the above. Kudos to all the devs.

I followed your directions and now play store does not work. Can you help me??

I had to experiment with this because some of the files gave me problems. Aside from the aosp-7.1-p4-20171005.zip which does work some the files don't. I ended up using TWRP version 2.8.7.0. (there is no official TWRP for the GT-P7510. Closest one is called "Picaso" you can search specifically for that one). Whichever GAPPS you decide to use must be an "open" Gapps such as, open_gapps-arm-7.1-full-20181106.zip.
After flashing there were difficulties. Google Play apps won't download or install. Google Chrome or any other Google related apps do not function. There are no developer settings. I even tried to download some Developer Setting apks of which none work. The ROM in itself looks and works good except for those bugs. Camera and flash actually work properly.

X L ENT.
clappertrap said:
Hi all.
For a " Nooby " you have achieved an exellent result. I know a lot about PC's, But the Android OS is new for me. I followed your instructions to the letter. The end result is amazing, what a transformation. This article is very detailed and clear, also very well written. My compliments on a job well done. Thank you.
Click to expand...
Click to collapse

Android 8 or 9?
Great post. I'm also a noob but am going to give it a try since you've laid everything out so nicely. One question I have before getting started is do you think this will also work with the latest versions of Android (8 or 9) rather than Android 7? Thanks much for any advice before I take the plunge!

Peter711 said:
Great post. I'm also a noob but am going to give it a try since you've laid everything out so nicely. One question I have before getting started is do you think this will also work with the latest versions of Android (8 or 9) rather than Android 7? Thanks much for any advice before I take the plunge!
Click to expand...
Click to collapse
My curent opinion is that the Android 7 version works better overall.

thread: Complete Guide to Root and Update Samsung Galaxy Tab 10.1
ok so most of the roms i have tested are overcome v2.3, nougat AOSP 7.1.2 , cwm clean rom v2 and others on the GT-P7510MA and i must say they are awesome builds to try and ressurect the tablet giving life to it but these Roms seem to dont give it the core functionality of playing games or even being able to handle the YouTube app version came in the pico packages or downloaded from the play store, can you developers from GitHub please work on this tablet.It gives constant crashes on playing games downloaded from the app store or opening certain apps other from that you guys would make my day and i would generously donate cause you guys deserve every penny!!! please fix this and we are ok worked for me but everything except games and the YouTube app. People remember most of these developers don't have the tablets, time or cash so we have to test on our tablets, donate so there cup of coffee doesn't runs out and report to them effectively right before there coffee runs out!

I'm still using mine. There were some similar issues I had and if I remember correctly Google play was the main issue with other Google apps. I think and this is going on memory. You would install the ROM then the GAPPS, but not flash both at the same time. Or Google apps would lock up for some reason and give you some issue. So for it to work correctly you flash the ROM. Turned it on and let it load up. Then you would turn it off so you could start up the TWRP recovery, then you would flash the GAPPS.
But Channel 48 put out a video on this if you get confused. This is the easiest way.
https://www.youtube.com/watch?v=rN1Xwskjjfw&t=914s
And the update to 8.1 is also an option.
https://www.youtube.com/watch?v=R_bsR1Az3Sw&t=312s

Thanks @Casper Young I will take a look at the 8.1
It seems Channel48 has a lot of helpful videos. You can search for your exact model on his search page: for example, I am checking on P5110 here:
https://www.youtube.com/c/channel48/search?query=p5110

Hi, there, everyone
I've been trying to download the files needed, but most of the links no longer work. Where can I find the programs needed?