Just wondering if this is possible, and if so, which phones and OS's will support this. More specifically, will the Samsung Nexus S be able to browse filles off of my WD USB3.0 My Passport Essential SE 1TB?
i have seen something done in this regard where that guy used a "fake" microSD to act as one end of a USB cable. the other end was a regular usb port where he hooked a usb thumb drive. you might try to find it and see if it applies on your case.
only o2 flame can do usb otg
but slow in transfer rate as usb 1.1
I have a similar question.Can i somehow send pictures from a USB device to my iPhone? I really need to get those pictures on my phone. Is there a way other than using my pc?
Can anyone recommend a USB SDHC card reader that I can mount on my CM9 touchpad?
I've got the USB Y cable and can see the contents of USB sticks in Astro file manager, also managed to view the pictures on the memory card in my Olympus SLR camera. Unfortunately my other camera Canon compact camera doesn't support mass storage mode, so i want a SDHC USB card reader that i can plug into my touchpad to view the pictures on the memory card.
I've tried a couple of SDHC USB dongles and haven't been able to get them to work, i plug them in and nothing happens, no blinkning LEDs, no files showing in Astro.
So has anyone got this to work, if so can you post a link to the card reader you use?
Thanks!
obo789 said:
Can anyone recommend a USB SDHC card reader that I can mount on my CM9 touchpad?
I've got the USB Y cable and can see the contents of USB sticks in Astro file manager, also managed to view the pictures on the memory card in my Olympus SLR camera. Unfortunately my other camera Canon compact camera doesn't support mass storage mode, so i want a SDHC USB card reader that i can plug into my touchpad to view the pictures on the memory card.
I've tried a couple of SDHC USB dongles and haven't been able to get them to work, i plug them in and nothing happens, no blinkning LEDs, no files showing in Astro.
So has anyone got this to work, if so can you post a link to the card reader you use?
Thanks!
Click to expand...
Click to collapse
Make sure you're file manager is set to show all/hidden files.
I use tiny Dane elec readers but any should work.
Make sure they are fat 32 format.
Does USB OTG work on cm9?
I can't get it to work with my nexus OTG adapter?
Thanks and sorry to hijack
Sent from my Galaxy Nexus using Tapatalk
jameslfc5 said:
Does USB OTG work on cm9?
I can't get it to work with my nexus OTG adapter?
Thanks and sorry to hijack
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
Yes it works
You need correct y and OTG cable and appropriate power source.
I managed to get astro to show the files on an USB Key, but when plugging 2 diff Card readers, and an SD card (fat32), although one of the adapters shows a led, USB storage remains empty under Astro...
any ideas?
tx
I took a punt and bought another SD card reader from amazon and it worked!
In case anyone else is looking for the same thing it's called "Daffodil UCR03 Ultra Slim all-in-1 USB 2.0 Memory Card Reader" on amazon.co.uk. This reads my 8GB SDHC card fine. Cost me about £3.50.
Can't include a link as forum won't let me cos i'm a newbie.
Would this work with WebOS too? And does this need external power source such as a USB hub?
I'm a total noob at this and could use a for-dummies version of how to connect a USB SDHC card reader to the Touchpad (I only recently flashed CM9).
Specifically, I would appreciate if someone could point me towards the exact products I would need in order to set up a USB card reader for my TP. I assume that I will need (1) a USB card reader (such as the Daffodil product mentioned by obo789) and (2) a micro USB adapter of some sort so that I can connect the USB card reader to the TP (is this the "OTG Cable" mentioned)?
If so, is there a particular USB card reader and cable that people recommend?
Once I've obtained the necessary products, would I just D/L Astro File Manager from the App store? Would EZ File Manager also work?
Sorry for the noob questions. I searched this and other forums but could not find a definite answer.
All the details on how to connect are here - http://forum.xda-developers.com/showthread.php?t=1582771&highlight=otg
It just needed a 5 second search.
Thank you so much for the link. I kept searching for USB card readers and nothing came up (here and on other online forums). I didn't t think to search for USB OTG compatibility since, until last night, I had no idea what USB OTG meant.
Thank you again for your help and for pointing me in the right direction.
The two I got working were both double capped style, one cap for the SD card and another for the USB plug. One is branded Dane Elec IIRC and the other was a free promo item from Panasonic I got a while ago.
Anyone know where I can get a y cable in the UK?I've tried all sorts of searches on amazon.co.UK and eBay, annoyingly the ones linked from amazon.com won't ship to the UK
Sent from my cm_tenderloin using Tapatalk 2
4-in-1 OTG adapter may save cables.
obo789 said:
Can anyone recommend a USB SDHC card reader that I can mount on my CM9 touchpad?
I've got the USB Y cable and can see the contents of USB sticks in Astro file manager, also managed to view the pictures on the memory card in my Olympus SLR camera. Unfortunately my other camera Canon compact camera doesn't support mass storage mode, so i want a SDHC USB card reader that i can plug into my touchpad to view the pictures on the memory card.
I've tried a couple of SDHC USB dongles and haven't been able to get them to work, i plug them in and nothing happens, no blinkning LEDs, no files showing in Astro.
So has anyone got this to work, if so can you post a link to the card reader you use?
Thanks!
Click to expand...
Click to collapse
Hardware is one thing, I just purchased one of these 4-in-1 adapters linked in this thread: http://forum.xda-developers.com/showpost.php?p=31034220&postcount=35
But your issue may be software/OS related, also discussed in that thread: http://forum.xda-developers.com/showpost.php?p=30952816&postcount=34
or better yet: http://rootzwiki.com/topic/33033-otg-usb-insufficient-available-bus-toolthingy/#entry921673
IMHO: you need the USB unmout utility presented there. Try it if your USB flash drives ot USB SD card readers don't work. You might just have a "insufficeint bus power" response, which the utility can correct. I can now read all my camera & camcorder SD cards from a USB interface that failed prior.
obo789 said:
Can anyone recommend a USB SDHC card reader that I can mount on my CM9 touchpad?
I've got the USB Y cable and can see the contents of USB sticks in Astro file manager, also managed to view the pictures on the memory card in my Olympus SLR camera. Unfortunately my other camera Canon compact camera doesn't support mass storage mode, so i want a SDHC USB card reader that i can plug into my touchpad to view the pictures on the memory card.
I've tried a couple of SDHC USB dongles and haven't been able to get them to work, i plug them in and nothing happens, no blinkning LEDs, no files showing in Astro.
So has anyone got this to work, if so can you post a link to the card reader you use?
Thanks!
Click to expand...
Click to collapse
I'm planning to use: http://www.amazon.com/Samsung-Note-...ction-Kit/dp/B006MJZOMW/ref=pd_ecc_rvi_cart_2
In theory you can use your HP charger connected to it as power source.
sheedatali said:
Would this work with WebOS too? And does this need external power source such as a USB hub?
Click to expand...
Click to collapse
webOS needs some preware.
JOLiu said:
I'm a total noob at this and could use a for-dummies version of how to connect a USB SDHC card reader to the Touchpad (I only recently flashed CM9).
Specifically, I would appreciate if someone could point me towards the exact products I would need in order to set up a USB card reader for my TP. I assume that I will need (1) a USB card reader (such as the Daffodil product mentioned by obo789) and (2) a micro USB adapter of some sort so that I can connect the USB card reader to the TP (is this the "OTG Cable" mentioned)?
If so, is there a particular USB card reader and cable that people recommend?
Once I've obtained the necessary products, would I just D/L Astro File Manager from the App store? Would EZ File Manager also work?
Sorry for the noob questions. I searched this and other forums but could not find a definite answer.
Click to expand...
Click to collapse
I've never used EZ File Manager? ES FileExplorer is fine.
I needed this app too: http://rootzwiki.com/topic/33033-otg-usb-insufficient-available-bus-toolthingy/#entry921473
Nathanation said:
Anyone know where I can get a y cable in the UK?I've tried all sorts of searches on amazon.co.UK and eBay, annoyingly the ones linked from amazon.com won't ship to the UK
Sent from my cm_tenderloin using Tapatalk 2
Click to expand...
Click to collapse
Sorry cant post a link cos I'm still new
The one i bought off amazon is now out of stock but i found another, search for "dual input usb cable" bit pricey but looks like it should work...?
Good luck!
Micro USB OTG w/ power
Nathanation said:
Anyone know where I can get a y cable in the UK?I've tried all sorts of searches on amazon.co.UK and eBay, annoyingly the ones linked from amazon.com won't ship to the UK
Sent from my cm_tenderloin using Tapatalk 2
Click to expand...
Click to collapse
Perhaps this? The Chinese don't care where they ship to:
http://www.ebay.com/itm/130740524313?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649
ZedZardoz said:
Perhaps this? The Chinese don't care where they ship to:
http://www.ebay.com/itm/130740524313?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649
Click to expand...
Click to collapse
That should work and would have a lot less cable clutter than the original set up. With that all you would need is any microUSB charger to power it. There is also one for sale that has a male USB connection for power instead of a female micro USB. With this it would be easier to hook to one of those portable USB chargers that use a full size USB port.
http://www.ebay.com/itm/Micro-USB-H...i9100-S3-i9300-i9220-i9250-XOOM-/140825132367
Thanks for the links, i was searching the wrong terms completely lol
Im hoping to use my otg stuff to read my canon 550d sd card and ive found and an app called DSLR controller which will hopefully let me use my touchpad as a remote viewer for my camera, i'll post a pic of my serup when everything arrives
Sent from my HTC EVO 3D X515m using Tapatalk 2
Response and Results
ZedZardoz said:
Perhaps this? http://www.ebay.com/itm/130740524313?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649
Click to expand...
Click to collapse
This one would be used with the stock HP charger (to micro-female):good:
spunker88 said:
That should work and would have a lot less cable clutter than the original set up.
There is also one for sale that has a male USB connection for power instead of a female micro USB. With this it would be easier to hook to one of those portable USB chargers that use a full size USB port.
http://www.ebay.com/itm/Micro-USB-H...i9100-S3-i9300-i9220-i9250-XOOM-/140825132367
Click to expand...
Click to collapse
:good:
This one is best, as you say, for portable supplies with Std USB such as this one listed here :http://forum.xda-developers.com/showpost.php?p=24462102&postcount=1 <<< 2AA Battery Powered Portable USB Power Supply: http://www.amazon.com/gp/product/B003M9Z5F6
I'm using this, as I already have this solar rechargable soulution I use for my phone:
http://www.goalzero.com/shop/p/8/Guide-10-Battery-Pack/2:8/
Nathanation said:
Im hoping to use my otg stuff to read my canon 550d sd card and ive found and an app called DSLR controller which will hopefully let me use my touchpad as a remote viewer for my camera, i'll post a pic of my serup when everything arrives
Click to expand...
Click to collapse
I have a camera buff that wants to use that setup for DSLR, please return to post your configuration and results! :silly:
=== Review of Juiced Systems ACA adapter ===
I got this: http://www.amazon.com/Samsung-Multi-functional-Connection-Kit-Compatible/dp/B006MJZOMW
It appears to be a USB OTG ACA compliant device. Sadly it's for Galaxy Nexus Products and the full ACA compatibility doesn't appear to be implemented in hardware and/or software on the Touchpad with CM9.
1- It does function as OTG host port with the Micro usb from a charger powering the down stream devices. :good:
2- OTG to devices on USB/microSD/SD interfaces works well, but only one at a time for memory volumes (FAT32). Not sure if that's a software shortcoming.
3- Success with a wireless adapter for Logitec mouse/keyboard on USB. :good:
4- Haven't found an NTFS mount solution for Touchpad w/ CM9 nightly 0903.
5- It does connect to the Touchpad, but not with the HP folio case or any case as it's a close fit.
6- The ACA charging of the touchpad while hosting, or otherwise, sadly doesn't work as it was reported to function on SG2.
7- ACA indicator never lights up for charging or host.
Initial Result:
- At $20USD there are fewer cables, but full ACA charging doesn't work, which was my motivation to spend more.
- OTG to devices on USB/microSD/SD interfaces works well, but only one at a time for memory volumes FAT32.
- The physical connection seems a little weak to me. I almost feel like it could break off damaging the adapter, or worst, the micro USB interface.
Further tests:
- I want to check if the Wirless mouse/keyboard on USB can be used with a SD card in either slot.
- I'd also like to test of external HUB with devices further downstream such as self powered HDD and seperate USB Mice, Keyboards (for deskside use).
- Can anyone recommend a ICS compliant USB GPS & app?
Although this setup with: Touchpad, USB battery, Juice adapter, is simple and elegant, its pricy for features I'm not able to use (charging while host). I'm not impressed it will be rugged enough for field use.
Here is my recommended portable solution, which is also cheaper:
- HP Touchpad
- Battery soulution of choice <<< $4.25USD
- OTG host cable & power Y combo: http://www.ebay.com/itm/Micro-USB-H...i9100-S3-i9300-i9220-i9250-XOOM-/140825132367 <<< $6USD
- USB memory / flash drive of choice
(or other USB device that is ICS compatible with HP Touchpad)
:victory:
Will do
Im getting the camera tomorrow and the cables and adapter should arrive soon!
Sent from my HTC EVO 3D X515m using Tapatalk 2
Dear XDA,
I am planning to make a custom "case" for my ville. My plan is to mod a very small usb hub into it. So i can plug in usb sticks & memory cards and stuff. Also i wanna buy a very fast mirco sd card. The hub cable wil be inserted in the mirco usb port. I wanted to ask how to boot from such an external micro sd card, outside the one s. If it is possible do i need to root it? Has anyone tried something failiar before? And am i able to charge my phone through the usb hub? Does anyone know if it is needed to mod the hub for this and if i need to do it, how?
The total picture is: otg cable in one s to usb hub, from the hub 1 sd card (hopefully bootable from this), 1 usb port for charging (>????) 2 where i can put mouse and usb stick in?
Hopefully everyone shares his imformation about it,
Tanks in advance,
pro-one1000.
giesse1996 said:
Dear XDA,
I am planning to make a custom "case" for my ville. My plan is to mod a very small usb hub into it. So i can plug in usb sticks & memory cards and stuff. Also i wanna buy a very fast mirco sd card. The hub cable wil be inserted in the mirco usb port. I wanted to ask how to boot from such an external micro sd card, outside the one s. If it is possible do i need to root it? Has anyone tried something failiar before? And am i able to charge my phone through the usb hub? Does anyone know if it is needed to mod the hub for this and if i need to do it, how?
The total picture is: otg cable in one s to usb hub, from the hub 1 sd card (hopefully bootable from this), 1 usb port for charging (>????) 2 where i can put mouse and usb stick in?
Hopefully everyone shares his imformation about it,
Tanks in advance,
pro-one1000.
Click to expand...
Click to collapse
You cannot use an otg cable for charging. Also, you cannot boot from an otg device since it isn't even enabled until you are actually booted into Android.
HTC_One_S | S-OFF | ViperOneS_2.2.0 | Black-Blue_Sense_Theme | ElementalX_4.2
So I recently got a Galaxy S7 and it comes with a nice and compact OTG micro USB adapter that I'd love to be able to use on my 6P as well. Thing is, the current USB C adapters I have (techmatte) don't allow it to work. The notification about a USB drive being connected just keeps popping up and going away very fast. The OTG adapter works on my GS7 and my GS3, so I'm ruling it as the techmatte adapter. I'd really like to find a reliable micro USB to C adapter so I can just keep using my micro USB devices in a pinch.
I've read a few topics on here, most seem to be old though or don't have the info I'm looking for. So I'm hoping someone can point me in the direction of something more recent and verified to be working how I want. Thanks.
I haven't been able to get OTG to work at all either.
Sent from my Nexus 6P using Tapatalk