Hey everyone!
I'm new to JOINING this forum. However I have been taking bits of this forum for a few months now. I am a well experienced user when it comes to android development and rooting, but one thing I need to know - is about the Xperia E.
I hate the processor of the phone. 1GHz with 512MB is not enough, but I can change my RAM to 1GB with Root Apps and I want to use the full potential of the 1GHz Processor. I have tried rooting 3 phones, it turned successful, and next is the Xperia E. But Rooting seems dodgy and first I want to try Framaroot.
I had tried Framaroot 1.8.0, 1.8.1, 1.6.0, 1.6.1, 1.4, 1.3, 1.5.1. All with Aragon or Gandalf, and none worked.
My phone is clearly listen as C1505 on the Compatibility list. So why is this not working?
I need help on this. And if there is any other way on rooting the device safely so it cannot be bricks nor severly damaged, I will do.
Phone - Sony Xperia E
Android - 4.1.1 Jelly Bean
4GB (3.64GB) SD Card
Framaroot V1.8.0 (Not working
3.4.0/11.3.A.2.13
Try kingo android root- google for it
Sent from my Sony Xperia E Dual
Ehh. Could that brick?
Try this:
http://forum.xda-developers.com/showthread.php?t=2435957
Thanks Guys, I used Kingo Android Root and successfully rooted my device. One thing though - The Sound went temporarily and wi-fi didn't work completely until I rebooted about three times. Mobile Data worked fine as well as the processor, just nothing else. Why?
Need Severe Help
XPeRIAeUSeR said:
Thanks Guys, I used Kingo Android Root and successfully rooted my device. One thing though - The Sound went temporarily and wi-fi didn't work completely until I rebooted about three times. Mobile Data worked fine as well as the processor, just nothing else. Why?
Click to expand...
Click to collapse
It was working fine guys until I downloaded LCD Density. I put it too 300 for a little experience test.
A Bad way to go - My phone can charge, connect to PC Companion and Update Service, but is stuck at the Sony Screen.
When trying to repair at the Sony Companion, it says 'Already Latest Drivers'. When trying to us SUS, it says the same. I cannot get into flashmode and I don't have an unlocked bootloader. I'm on Kingo Android Root with SuperSU, LCD Density, Frills CPU Control, an some other root app. I need help for XPERIA E fast, because it's the only phone have in my current price range and I need to restore it to default. Any ideas?
XPeRIAeUSeR said:
It was working fine guys until I downloaded LCD Density. I put it too 300 for a little experience test.
A Bad way to go - My phone can charge, connect to PC Companion and Update Service, but is stuck at the Sony Screen.
When trying to repair at the Sony Companion, it says 'Already Latest Drivers'. When trying to us SUS, it says the same. I cannot get into flashmode and I don't have an unlocked bootloader. I'm on Kingo Android Root with SuperSU, LCD Density, Frills CPU Control, an some other root app. I need help for XPERIA E fast, because it's the only phone have in my current price range and I need to restore it to default. Any ideas?
Click to expand...
Click to collapse
Are you sure you can't get into Flashmode?
You could try this:
Connect your phone with your PC. Open up device manager(google on how to open, if you don't know). Click with the right mouse on your Xperia E's drivers and select "delete" or "uninstall".
Now: disconnect your phone, and connect it again. Windows will most likely ask you to install drivers. Ignore it!
Now try to repair with PC Companion or use SUS.
They should ask you to install the drivers(not 100% sure...). Let it, and then perform the steps.
It may work, but I can't guarantee it will!
Hope I helped an have a nice day!
PS. Tip: never do anything(use an app, flash a tweak) until you're absolutely sure it won't mess up your device
Sent from my Xperia E using XDA Premium 4 mobile app
If you had read the thread on how to root the Xperia E then you wouldn't be in this mess. You would also know that you can't root the latest firmware. You have to downgrade, root, then OTA update - or - flash older kernel, root, flash new kernel.
Reading would have prevented this.
CtrlAltDelIrl said:
IYou would also know that you can't root the latest firmware.
Click to expand...
Click to collapse
It is possible with cydiaimpactor or kingo without downgrading .
Sent from my Xperia E using XDA Premium 4 mobile app
Actually if you were smart, you would've flashed lower JB kernel from last firmware which was rootable then root then flash the Latest JB kernel
XPeRIAeUSeR said:
It was working fine guys until I downloaded LCD Density. I put it too 300 for a little experience test.
A Bad way to go - My phone can charge, connect to PC Companion and Update Service, but is stuck at the Sony Screen.
When trying to repair at the Sony Companion, it says 'Already Latest Drivers'. When trying to us SUS, it says the same. I cannot get into flashmode and I don't have an unlocked bootloader. I'm on Kingo Android Root with SuperSU, LCD Density, Frills CPU Control, an some other root app. I need help for XPERIA E fast, because it's the only phone have in my current price range and I need to restore it to default. Any ideas?
Click to expand...
Click to collapse
You can also try this:
1. Download Flashtool and install it: http://forum.xda-developers.com/showthread.php?t=920746 Then download this, and put it in your Flashtool firmwares folder: http://d-h.st/ufn
2. Open Flashtool, and click the lightning icon. Select Flashmode, then press OK. Choose the 11.3.A.0.47 and click Flash. (Warning: everything on your phone [other than the microSD card and internal storage for music etc.] will be deleted!)
3. When it tells you to hold the back button on your phone and stuff, turn off the phone, hold the volume down button, and holding the button, plug the phone in. It'll be flashed.
4. When it's flashed, Flashtool will read: "Disconnect your device and power it on" or something like that. Do as it says.
5. Hopefully you'll be on the 0.47 firmware, which is compatible with Framaroot. You can use the Gandalf exploit to root your phone.
NSDCars5 said:
You can also try this:
1. Download Flashtool and install it: http://forum.xda-developers.com/showthread.php?t=920746 Then download this, and put it in your Flashtool firmwares folder: http://d-h.st/ufn
2. Open Flashtool, and click the lightning icon. Select Flashmode, then press OK. Choose the 11.3.A.0.47 and click Flash. (Warning: everything on your phone [other than the microSD card and internal storage for music etc.] will be deleted!)
3. When it tells you to hold the back button on your phone and stuff, turn off the phone, hold the volume down button, and holding the button, plug the phone in. It'll be flashed.
4. When it's flashed, Flashtool will read: "Disconnect your device and power it on" or something like that. Do as it says.
5. Hopefully you'll be on the 0.47 firmware, which is compatible with Framaroot. You can use the Gandalf exploit to root your phone.
Click to expand...
Click to collapse
Yeh, I did read the kernel thing however I thought Kingo did it for you. And it wasn't the Rooting, it was the LCD Density too high to load up the phone because it was working fine before (correct if im wrong). I did the flashtool however there is no option for my kernel and it says my phone cannot officially be unlocked thing. I will try device manager
Wait...I have device manager up, my xperia e connects to the device manager, but I can't find the Xperia E on the device manager. There was a Sony ericcsson thing I deleted; my computer still works fine but no software available stll for Xperia E. What would the Xperia E (C1505) be called in the device manager?
Please help, i uninstalled xperia e drivers but still says no update available. I can get in flashmoe however bootloader LOCKED.
XPeRIAeUSeR said:
Please help, i uninstalled xperia e drivers but still says no update available. I can get in flashmoe however bootloader LOCKED.
Click to expand...
Click to collapse
Wait. So you can get into flashmode?
Well, the it doesn't matter if your bootloader is locked You can still flash!
Just download Androxyde's flashtool and flash a stock .ftf firmware.
If you want a guide I can sent you a link later, but now I'm on my phone, so...
Success, and have a nice day
Sent from my Xperia E using XDA Premium 4 mobile app
I have that flashtool with C1505 Latest firmware; it says aborted everytime! Send me a guide please, with working links to working downloads of working firmwares.
XPeRIAeUSeR said:
I have that flashtool with C1505 Latest firmware; it says aborted everytime! Send me a guide please, with working links to working downloads of working firmwares.
Click to expand...
Click to collapse
What error does it give?
I can only remember it said something about sin error and then said aborted.
I lost my usb; ill try in a bit
XPeRIAeUSeR said:
I can only remember it said something about sin error and then said aborted.
I lost my usb; ill try in a bit
Click to expand...
Click to collapse
sin error? That means you tried to flash a .ftf that isn't made for your device. You have probably the wrong firmware
Use this one instead: http://d-h.st/ufn
Succes!
Mine has that exact kernel, but I'll try it anyway. I'll give you results once found my usb.
Thanks
Related
So I rooted my Xperie E C1505 and installed Chainfire3d , thinking nothing bad was going to come out of it, and when I installed some package on Chainfire3d, ignoring the warning, my phone is now stuck in Bootloop!
Just now, I unrooted my phone using KINGO Android ROOT, but this hasn't brought me anywhere I have Flashtool and I downloaded a 4.11 Xperia E firmware and it is in the "firmware" folder. I attempted to flash my ROM and it was going fine until it asked me to connect device in Flashmode. I installed Flashmode and Fastboot drivers and I connected my phone, but only the green LED came up on the phone and nothing happened
I have no clue now so any help would be greatly appreciated!
shaunovenss said:
So I rooted my Xperie E C1505 and installed Chainfire3d , thinking nothing bad was going to come out of it, and when I installed some package on Chainfire3d, ignoring the warning, my phone is now stuck in Bootloop!
Just now, I unrooted my phone using KINGO Android ROOT, but this hasn't brought me anywhere I have Flashtool and I downloaded a 4.11 Xperia E firmware and it is in the "firmware" folder. I attempted to flash my ROM and it was going fine until it asked me to connect device in Flashmode. I installed Flashmode and Fastboot drivers and I connected my phone, but only the green LED came up on the phone and nothing happened
I have no clue now so any help would be greatly appreciated!
Click to expand...
Click to collapse
Open flashtool,select firmware.
Untick everything except wipe data.
Flash.[Will take some time]
A dialog box will pop up saying connect to flashmode.
Power off mobile.
Press the volume down button while connecting phone via usb.
Phone will get detected,and then a firmware shall be flashed.
[Have you installed adb drivers?]
I downloaded ADB-USB drivers but when I open it in WinRAR, it's a .inf file so I dont know what to do
TheXperiaE said:
Open flashtool,select firmware.
Untick everything except wipe data.
Flash.[Will take some time]
A dialog box will pop up saying connect to flashmode.
Power off mobile.
Press the volume down button while connecting phone via usb.
Phone will get detected,and then a firmware shall be flashed.
[Have you installed adb drivers?]
Click to expand...
Click to collapse
I downloaded ADB driver but when I open it with WinRAR, it's a .inf file, so I don't know what to do
Dude if you haven't unlocked your Sony Xperia Phone's bootloader you can repair your phone with Sony Update Service (SUS) software.
You just need to be in the working flashmode and else all work will be handled by that software.. from downloading the firmware of your phone to flashing it and then you will get your phone up to date working with the latest firmware.
Sent from my Xperia E using XDA Premium 4 mobile app
I know there are probably lots of threads about this, but I couldn't find one about E3 since it's a relatively new phone, but to point now
So I tried to update my Xperia E3 to it's latest firmware via the Sony pc companion(it was the only option) and during the update ,once it was downloaded it prompted to connect the phone through the USB cable, once done it began installing the update but when it was like at 80-85% it showed an error saying that internet connection isn't available and gave two options to either retry or cancel, now the internet was just working fine, I checked google, Youtube everything and it was working, but every time I hit retry it gave the same option ,so eventually I canceled the update,
Now the phone was switched off so I tried switching it on and it just froze at the sony boot logo screen, restarting with power button+volume up only restarts it to the same situation(stuck at logo screen), I did look up for a solution but couldn't find one that fit,
Of course I did switch it off using the off button at the back of phone(under the back cover), and I know about Sony Update service but that's no longer supported(it required the phone in off state), pc companion can't detect an off phone and when it does it starts phone to boot frozen screen and fails at detect step, another thing I found was a custom tool(possibly just SUS) that could flash a firmware in an off phone but however there is no firmware available for my version, since I live in India, so there's that , any help is appreciated,
A few things:
-The battery was at 91% when update started
-There was no root attempt etc made on phone, it was complete stock
-I did update the firmware once earlier but just from the phone it was a 2 mp update, no pc
-When I started this update there was already a 29 mb something update available without pc, and that's pretty much all, like I said any help is appreciated
Don't worry buddy, your phone doesn't die yet. Actually, PC Companion (PCC) has repair phone/tablet function.
Open PCC, click Start button in Support Zone, then continue to click Start button under Phone/Tablet Software Update and you will see "Repair your phone/tablet". Just follow its instruction. remember using the hard reset button under the back cover to turn off the device first and don't turn it on.
Anyway, what is your model? d22xx? i can't provide the firmware unless I know exactly the model.
It worked
Benjoy Ericsson said:
Don't worry buddy, your phone doesn't die yet. Actually, PC Companion (PCC) has repair phone/tablet function.
Open PCC, click Start button in Support Zone, then continue to click Start button under Phone/Tablet Software Update and you will see "Repair your phone/tablet". Just follow its instruction. remember using the hard reset button under the back cover to turn off the device first and don't turn it on.
Anyway, what is your model? d22xx? i can't provide the firmware unless I know exactly the model.
Click to expand...
Click to collapse
Thanks man, it worked, the phone is good and running again.
Benjoy Ericsson said:
Don't worry buddy, your phone doesn't die yet. Actually, PC Companion (PCC) has repair phone/tablet function.
Open PCC, click Start button in Support Zone, then continue to click Start button under Phone/Tablet Software Update and you will see "Repair your phone/tablet". Just follow its instruction. remember using the hard reset button under the back cover to turn off the device first and don't turn it on.
Anyway, what is your model? d22xx? i can't provide the firmware unless I know exactly the model.
Click to expand...
Click to collapse
Hello, my device is D2212 and I have similar problem.
I've rooted and unlocked bootloader using this method from XDA forum to root Xperia E3. However after unlocking bootloader and root my device my PC and my notebook doesn't recognize my device to transfer data or access data of cellphone. It keeps in charging mode.
Today it was really weird and lagging way too much so I tried to reset to factory setting. After that my device does not start android it keep stuck on blue screen right after display of Xperia and android.
I tried this method you suggested of PC Companion but it does not work since PC does not recognize my device anymore since rooting.
I need help here, please.
O just bought this device last week.
Thanks in advance.
Cristy0505 said:
Hello, my device is D2212 and I have similar problem.
I've rooted and unlocked bootloader using this method from XDA forum to root Xperia E3. However after unlocking bottloader and root my device my PC and my notebook doesn't recognize my device to transfer data or access data of cellphone. It keeps in charging mode.
Today it was really weird and lagging way too much so I tried to reset to factory setting. After that my device does not start android it keep stuck on blue screen right after display of Xperia and android.
I tried this method you suggested of PC Companion but it does not work since PC does not recognize my device anymore since rooting.
I need help here, please.
O just bought this device last week.
Thanks in advance.
Click to expand...
Click to collapse
Flash the firmware again using flashtool.
adrianocolvero said:
Flash the firmware again using flashtool.
Click to expand...
Click to collapse
Hi, thank you for your kind support.
Do you mean which part of this tutorial? http : // forum.xda-developers.com/xperia-e3/general/root-e3-t2964845
First "HOW TO UNLOCK YOUR BOOTLOADER!" or second "NOW HOW TO FLASH THE KERNEL AND APPLY THE ROOT!"?
Best regards!
Cristy0505 said:
Hi, thank you for your kind support.
Do you mean which part of this tutorial? http : // forum.xda-developers.com/xperia-e3/general/root-e3-t2964845
First "HOW TO UNLOCK YOUR BOOTLOADER!" or second "NOW HOW TO FLASH THE KERNEL AND APPLY THE ROOT!"?
Best regards!
Click to expand...
Click to collapse
Use this tutorial:
http://forum.xda-developers.com/xperia-z/general/tutorial-how-to-flash-stock-roms-t2240614
With this firmware:
http://forum.xda-developers.com/xperia-e3/general/firmware-18-4-b-2-14-rool-xperia-e3-t2939699
adrianocolvero said:
Use this tutorial:
http://forum.xda-developers.com/xperia-z/general/tutorial-how-to-flash-stock-roms-t2240614
With this firmware:
http://forum.xda-developers.com/xperia-e3/general/firmware-18-4-b-2-14-rool-xperia-e3-t2939699
Click to expand...
Click to collapse
Thank you very much, sir!
hai guys i have a xperia e3 dual d2212 i'm not sure whether it's rooted or unlocked bootloader it stucks on logo screen i try to flash it using flash tool but it says
ERROR drivers needed to be installed for connected device
ERROR you can find them in the drivers folder of flashtool
but i searched there there no devices mentioning e3 only e is available
in this condition should i flash or there is any other way please give me a solution
Hello I have a Sony experia e3 and it is giving me a problem. When I'm trying to start my phone it is booting and gets off by itself and again restarts...and this is going on and on. So please can you help me or give me a suggestion about how to fix it.
Please please please help for which I may remain ever greatful to you
Guys, I am in desperate need of help to resolve my issue.
I have a T-Mobile Sony Xperia Z3 (D6616). Last night I went to flash Existenz Y in XZ Dual Recovery and when I rebooted the phone does not respond to anything. The ONLY thing I can do is hold down volume down and power and it boots up in the Android recovery screen, but any executed command here the phone just turns itself off. If I put the phone to charge the red LED comes on and the phone just vibrates on and off continuously.
The problem I am having is that for whatever reason the FTF stock file is not showing up in Flash tool. I can't drag it into the flash tool window, and using Xperim in flash tool when I find my model and click on the file nothing happens.
I have uninstalled and reinstalled everything. I have the stock FTF on hand, as well as the XZ dual recover file, and the existenxz Y .zip file. I just can't for the life of me get flash tool to populate the FTF file in the window when I go to flash?
I have tried using PC companion to fix/repair the phone as well. I connect the phone and it recognizes it but when I click to fix it and the window pops up asking to connect your phone and hit ok, i hit ok and the window just flashes and stays in place. I do nopt know what to do anymore and been without my phone for a day now already. Just need to figure out why the FTF is not showing in flash tool.
Thanks
Edit: Phone was rooted with kingroot, then Supersu was installed to replace kingroot. Root was verified. I am aware that this doesn't unlock the boo tloader on this phone.
I was able to use Flash tool on my Macbook Pro. For whatever reason in windows it's not recognizing the drivers or the stock ROM. So I rooted the Phone again with kingroot, after installing stock ROM, then installed Supersu, then installed XZ Dualrecovery. Wiped the phone, and for the second time installed existenz Y on the phones internal memory. Selected it in recovery, installed it. When In went to reboot the phone it did the same thing again. Not sure why Exiztenz Y is not working for me........
Edit: I restored my Windows laptop to factory settings and re-installed flashtool and now it's working.
I tried to put AOSP 5.1 from FXP in my phone, and my cellphone bricked. It wont turn on, it keeps the Sony Logo 2 seconds. It haven't connection with flashtool. Please Help me.
Hi. Can you give me more information what you did exactly step by step. So maybe i can help you. My E3 was bricked too. I found a solution. But i need more information.
Flash stock rom it'll unbrick it
#4
Thank you answer back! I did exactly the following:
The model is my Xperia E3 D2212 dual sim.
- Unlocked the bootloader, :laugh:
- CWM installed a custom recovery, :laugh:
- I reinstalled the original rom, :laugh:
- I made a backup of the entire system using CWM.
And everything went super normal way, without complications.
The mistake was when he wanted to installing a custom ROM called "AOSP_L_MR1_150718_flamingo" because I found out later that he had not read that it was for ANOTHER XPERIA as follow the you tube tutorial . The ROM's for another Xperia, if I remember correctly.
After doing the installation process of the new AOSP ROM, the phone is less than a minute on the logo of SONY XPERIA down with, looped, can not enter the bootloader, and no longer recognizes the PC. I can not recognize it at FlashTool. I think that's all. :crying:
I greatly appreciate your attention.
I ended up editing this text in the google translator, then I'm sorry, if you are not very good.
Thank you
Matteus Maximo Felisberto said:
I tried to put AOSP 5.1 from FXP in my phone, and my cellphone bricked. It wont turn on, it keeps the Sony Logo 2 seconds. It haven't connection with flashtool. Please Help me.
Click to expand...
Click to collapse
Someone can help me please?
nibeal said:
Hi. Can you give me more information what you did exactly step by step. So maybe i can help you. My E3 was bricked too. I found a solution. But i need more information.
Click to expand...
Click to collapse
Could you help me? I can not make the pc recognize him ... He barely turns on and off since. The PC Companion software tells recognize it, but when you are installing the software says "it is not possible for this phone is changed." I can not scessar the bootloader does not give time and it shuts down.
Thanks, my error was with the fastboot driver and adb in flashtool. The Windows drivers wasn't been recognized, I've to install the drivers, all of they. After this, I Flashed the Stcok ROM, installed SuperSU and Restored the backup, everything works fine and fluid now. Thanks, anyway, for encouraging me.
I flashed my D2203 back to factory rom yesterday using Flashtool (flashtool.net/downloads.php) on Windows 7 PC.
How did I do it:
1) Install flashtool
2) Install Flashtool-drivers.exe from flashtool subfolder /drivers and select flashmode and fastboot drivers.
3) Run Flashtool and open XperiFirm (letters XF on logo)
4) Select Xperia E3 Flamingo -> proper D22** you have -> Market -> and select latest release below PayPal logo
5) Press "Download" and wait for download and unpacking
6) Switch off phone (if power on/off button does not respond then open back cover and push "OFF" by using pen)
7) Press and hold volume down button and connect phone to PC using original USB cable
8) Using Flashmode flash device
I rooted mobile a while ago so suddenly one day it went in bootloop. So i tried to factory reset it after that still it didn't work out. After that i decided to just go for other rom so i unlocked my bootloader and tried to install cm 12.1. But wifi doesn't work on it also also it doesn't detect sim card.
Can anyone tell me how to set it to old device. I don't want any fashionable thing no root no recovery nothing i just want a phone back with wifi working and not rebooting like hell. I tried to download the original .ftf file but that also not flashing showing session ending error and please don't tell me to reinstall drivers i tried it already. my xperia L model is c2014. I also tried emma and those how don't know emma doesn't support some models and sadly one of which is my device. Plz anyone can tell me a easy process or something hopefull that i can try to get my phone back.And is sony service center will be able to help me if i give them my phone to service?
nisarg007 said:
I rooted mobile a while ago so suddenly one day it went in bootloop. So i tried to factory reset it after that still it didn't work out. After that i decided to just go for other rom so i unlocked my bootloader and tried to install cm 12.1. But wifi doesn't work on it also also it doesn't detect sim card.
Can anyone tell me how to set it to old device. I don't want any fashionable thing no root no recovery nothing i just want a phone back with wifi working and not rebooting like hell. I tried to download the original .ftf file but that also not flashing showing session ending error and please don't tell me to reinstall drivers i tried it already. my xperia L model is c2014. I also tried emma and those how don't know emma doesn't support some models and sadly one of which is my device. Plz anyone can tell me a easy process or something hopefull that i can try to get my phone back.And is sony service center will be able to help me if i give them my phone to service?
Click to expand...
Click to collapse
It is indeed a driver issue. If WiFi isn't working, you can flash stock ftf and then install whichever rom you were installing. Firstly, to get back to stock and relock your bootloader you need your TA. If you didn't backup your TA before unlocking your bootloader, You'll have to live with some functions of the stock rom lost. Restoring the TA locks your bootloader.
Okay so, if you have the stock ftf, head over to your flashtool folder, navigate to drivers and open Flashtool-drivers.exe.
For Xperia L, the drivers you need - "Flashmode Drivers", "Fastboot drivers", "Common drivers for Taoshan".
If install fails, you may need to disable driver signature check. Just google that, it's pretty simple.
If you don't see such a file, just get it from here - [Drivers] FlashTool Xperia Driver Pack (v1.5) [20140318]
Then connect your phone in FLASHmode. Not Fastboot. Fastboot has a blue LED and Flashmode has no LED (You'll see red and green flash before the no LED). Your device should be listed under Universal Serial Bus Controllers as SEMC Flash Device or Generic Flash device. If it says S1 Service or something similar, right click and update Driver Software, "Browse my computer for driver software", and let me pick from a list. Uncheck Show compatible Hardware, scroll to Sony Ericsson Mobile Communications, and select SEMC Flash device. Reconnect your device to check if it detects it as SEMC or Generic Flash Device. If yes, try to install your ftf.
If you were already on this driver, try switching to the S1 Service. (Not sure where to find that but it never worked for me. Your mileage may vary. Give it a search).
Also, if you take it to a service center, they'll probably charge you some money and probably replace the whole board. Thus, Hakuna Matata. Keep calm, your phone is absolutely fine. Never tried Emma though. Flashtool ftw!
Agent_fabulous said:
It is indeed a driver issue. If WiFi isn't working, you can flash stock ftf and then install whichever rom you were installing. Firstly, to get back to stock and relock your bootloader you need your TA. If you didn't backup your TA before unlocking your bootloader, You'll have to live with some lost functions of the stock rom lost. Restoring the TA locks your bootloader.
Okay so, if you have the stock ftf, head over to your flashtool folder, navigate to drivers and open Flashtool-drivers.exe.
For Xperia L, the drivers you need - "Flashmode Drivers", "Fastboot drivers", "Common drivers for Taoshan".
If install fails, you may need to disable driver signature check. Just google that, it's pretty simple.
If you don't see such a file, just get it from here - [Drivers] FlashTool Xperia Driver Pack (v1.5) [20140318]
Then connect your phone in FLASHmode. Not Fastboot. Fastboot has a blue LED and Flashmode has no LED (You'll see red and green flash before the no LED). Your device should be listed under Universal Serial Bus Controllers as SEMC Flash Device or Generic Flash device. If it says S1 Service or something similar, right click and update Driver Software, "Browse my computer for driver software", and let me pick from a list. Uncheck Show compatible Hardware, scroll to Sony Ericsson Mobile Communications, and select SEMC Flash device. Reconnect your device to check if it detects it as SEMC or Generic Flash Device. If yes, try to install your ftf.
If you were already on this driver, try switching to the S1 Service. (Not sure where to find that but it never worked for me. Your mileage may vary. Give it a search).
Also, if you take it to a service center, they'll probably charge you some money and probably replace the whole board. Thus, Hakuna Matata. Keep calm, your phone is absolutely fine. Never tried Emma though. Flashtool ftw!
Click to expand...
Click to collapse
Thanks will try. Changing board costs like 4-5 k and my phone is 2 year old so not replacing board rather i will go for a new device. I will surely try what u suggested. Thanks for help bro thanks a lot