Database Info

Reconnect the USB after sleep

Connected 7.0 plus to computer, after a while it went to sleep. Pressed the power key, so it will wake. In the windows explore I can't find the 7.0 plus any more. If I don't want to pull the cable out and insert it back, any way to reconnect the USB? It shows USB was connected, but nothing in windows explore.

I don't know if this will help, but when I use usb stick, after performing copying files etc, then safely remove usb, it won't recognize a different usb drive. So I re-boot and then it recognizes all again

What phone model is this?

https://www.box.com/s/1e4ee35d587f168cfbfd
https://www.box.com/s/7d0164dcbc096163402e
Anyone?
Also would HTC Desire charger work with it? (the sticks looks same - microUSB, but looks like the phone is not charging)

Also if the phone is dead, is there any way i can check if the battery/screen or whatever else is faulty?
When i connect it under Windows with USB cable, it says that the device cannot be recognized and the drivers cannot be installed.
When connected with USB, i did hold the power button to turn it on but it doesnt start and the phone keeps vibrating continuusly.

Look on the back, or inside, even under battery, for more information.

I already know it's Samsung Galaxy Mini II, homever i have issues turning it on.

All microusb chargers are the same except for amperage. Try all you have. This phone is probably terminally damaged, but try a new battery if possible.

It's really strange (the phone was little wet) homever, sometimes it's starting just fine and sometimes wont turn on at all.
I have removed battery and put it to the bowl with a rice for a night and will see if that helps.

My "dampness" recovery is to disassemble and put phone/tab/laptop in in very low oven ie 125-135 degrees F for several hours. You may have ti turn oven on & off manually to get that low temperature. Your mileage may vary.

OK so basically the phone is in following state:
It's charging fine, homever the biggest problem atm is i cannot get the usb mass storage to work.
I'm connecting it to the PC and the phone is detecting it as AC charger not USB - PC is not even trying to install any drivers.
PC is not detecting the phone at all (phone is detecting that its being connected, the button backlights are lighting up)
I got no dropdown in the phone to select charging, mass storage etc. (when i do it in settings/communication/usb settings it keeps saying to connect the usb cable, but the phone is charging so its connected just fine)
When i was connecting it for the first time windows tried to install drivers but failed, also it was constantly disconnecting the phone from usb cable (now its fine it seems)
When i connect it using "Kies Air" it's working homever i still dont see the SD Card in "My Computer" for example.
What a mess, anyway any idea how to get the USB working again?

Try different cable, and/or different PC.

I ordered new usb cable, homever i doubt it's the problem as the phone is recognizing connection and also it's charging fine.

Moto G not Charging via USB cable

I have Mato G XT1033, just got it yesterday. And I have my old samsung data cable with me. I am using the samsung's one since there is no data cable provided by moto g. today I tried charging my mobile in my office, when I connected my phone to the CPU, its showing "Charging" in the notification bar, but after a minute, I can see in battery settings, it showing as "Not charging" but I can still the charging logo in my battery icon.
There is a restriction policy in my office computer, it wont allow to install device drivers... Moto G is not getting charging because of this limitation in my office PC or any bug in my phone?
Kindly help...Thanks in advance.

I tested on my ubuntu laptop, could charge only when tethering via USB
powersupply from USB too low??

Nope, that is USB cable is working for other phones.. like Samsung, Nokia... in my home its working.. I suspect the limitation in my office is preventing the charging.... I think in order to charge motog, one need to install device drivers also...
Sent from my XT1033 using xda app-developers app

padhu1989 said:
I suspect the limitation in my office is preventing the charging.... I think in order to charge motog, one need to install device drivers also...
Click to expand...
Click to collapse
Sounds incredable.
I've encountered charger/cable combinations that just did not charge the moto, but changing the charger or cable solved it. There should be no need for drivers whatsoever.

I experienced the same issue with MOTO E.
The below solution worked for me.
Once you attach the charger to the PC and the phone the default setting is applied and the phone is connected as Media device.
Swipe down to see the notification center and click on the message that provides the USB connection info.
Change the option to Camera(PTP) and it will start charging the phone.
Hope it works for MOTO G as well.

PSatish said:
I experienced the same issue with MOTO E.
The below solution worked for me.
Once you attach the charger to the PC and the phone the default setting is applied and the phone is connected as Media device.
Swipe down to see the notification center and click on the message that provides the USB connection info.
Change the option to Camera(PTP) and it will start charging the phone.
Hope it works for MOTO G as well.
Click to expand...
Click to collapse
I bet it doesn't work.. it will show charging for moment.. it won't charge later then. I found out it was a USB charger issue and now I'm using Samsung USB cables.. I'm not facing any issues.. my phone charging with the default settings...
Sent from my Moto G using XDA Premium 4 mobile app

It worked for me and is still working without issues.
I cannot comment on MOTO G as I do not own it. For MOTO E it works.
All the best.............

MOTO E charging based on windows OS version
What I have observed for MOTO E is the USB cable can be used for data connection and charging. But NOT in XP OS based system where it is only transferring data, where as in Windows 7 based system the Phone is charging as well as transferring data
I have tried both in 2-3 systems ( of both type each) and the result was same. I have tried with 3 different cable in different PC each time result was same. However the MOTO G was tried only in one XP based ( and one cable only) system where it was charging
Has anyone else also had the same experience

padhu1989 said:
Nope, that is USB cable is working for other phones.. like Samsung, Nokia... in my home its working.. I suspect the limitation in my office is preventing the charging.... I think in order to charge motog, one need to install device drivers also...
Sent from my XT1033 using xda app-developers app
Click to expand...
Click to collapse
That is not true. There is no need for device drivers. In my office i also have no admin rights and i don't have any drivers on my pc, but still it is charging.

Just bought a Moto G 4G.
Noticed this behaviour in my office when connected via USB to my laptop.
I've discovered that if I plug the cable in with the screen off / locked state, it continues to charge as it should via the USB :victory:
It's only once you unlock the screen (hitting the power button to wake the screen is fine and doesn't affect it - I use a pattern lock) and the phone detects a data connection, it then drops the charging function.
So as long as the phone doesn't go into transfer mode charging is good.

I never had a charging problem.........till today.
Wonder why this suddenly happend?!
I daily charge my phone at work using the USB port of my PC.
On my PC there are no drivers installed due to administrator restictions but i could charge the phone till now always without any problems. Today i wanted to charge my mobile and suddenly it did not charge. Restarted phone and pc what did not solve the problem. Also i was using always the same cable and the same usb ports. But below quoted suggestion helped me out of trouble. I thought charging problems were solved using 4.4.4?!
Damn.
PSatish said:
I experienced the same issue with MOTO E.
The below solution worked for me.
Once you attach the charger to the PC and the phone the default setting is applied and the phone is connected as Media device.
Swipe down to see the notification center and click on the message that provides the USB connection info.
Change the option to Camera(PTP) and it will start charging the phone.
Hope it works for MOTO G as well.
Click to expand...
Click to collapse
:good:
@vkr200710: In our office we also have XP based PC's. Glad that there will be soon a Rollout!

Hi. (my first post at this site)
i confirm that, on xp (without drivers installed) my moto g started charging after changing USB connection to Camera(PTP) mode.
cya'
Sergio from Argentina

Enable USB Debugging
Works for me after enabling USB Debugging option.
I have Windows 7. Both at work and Home. It needs to install USB drivers to charge via USB Cable. But in Office I was unable to install driver due to restriction. I Enabled Developers option and then USB Debugging and wallah it worked like charm.
Not sure if this will work on XP.
To enable and access developer options on Moto E, you can simply follow these steps:
Tap Settings
Tap About phone
Tap the Build number field 7 times. You will begin seeing a message as you approach the 7 touches.
Tap the back arrow once complete.
Go to Developer Options and check USB debugging

yes its working
[email protected] said:
Works for me after enabling USB Debugging option.
I have Windows 7. Both at work and Home. It needs to install USB drivers to charge via USB Cable. But in Office I was unable to install driver due to restriction. I Enabled Developers option and then USB Debugging and wallah it worked like charm.
Not sure if this will work on XP.
To enable and access developer options on Moto E, you can simply follow these steps:
Tap Settings
Tap About phone
Tap the Build number field 7 times. You will begin seeing a message as you approach the 7 touches.
Tap the back arrow once complete.
Go to Developer Options and check USB debugging
Click to expand...
Click to collapse
Yes after making it to debugging mode its damn working cool yar......

Worked for me in office laptop moto g
Even i have also faced the same issue, pl dont select either options(PTP and MTP) modes then it works

not charging moto g connected to laptop
i have followed the debugging options said yet again its not charging

Same Problem here: But I guess the PC isn't the problem
padhu1989 said:
I have Mato G XT1033, just got it yesterday. And I have my old samsung data cable with me. I am using the samsung's one since there is no data cable provided by moto g. today I tried charging my mobile in my office, when I connected my phone to the CPU, its showing "Charging" in the notification bar, but after a minute, I can see in battery settings, it showing as "Not charging" but I can still the charging logo in my battery icon.
There is a restriction policy in my office computer, it wont allow to install device drivers... Moto G is not getting charging because of this limitation in my office PC or any bug in my phone?
Kindly help...Thanks in advance.
Click to expand...
Click to collapse
I've a similar problem too. My Moto G3 charges well with my old laptop (HP 431) but when I use the same data cable on my new laptop (HP Pavilion x360 Convertible) the phone shows charging for about 30 seconds then it wont charge after that. The problem repeats if I unplug the phone and plug it in again i.e it shows charging for some time and won't charge again. I tried installing the latest Motorola drivers from the Motorola but it won't solve the issue. Can anyone provide a fix for this.

GT-N8000 bricked: not recognized by PC, won't turn on or show battery charge status

Hi guys,
a friend of mine gave my his GT-N8000 with this issues:
if connected to PC, it isn't recognized, it doesn't seem to charge, even if connected to the AC wall. Of course, nothing happens if I try to turn it on by pressing POWER button.
Is there anything I can try to do to unbrick it?
Thanks in advance for the reply!
UPDATE: I opened the back, plugged the usb cable from the GT N8000 to the pc (with Windows 10) and pressed on the pcb: the pc recognized it as cdc abstract control model (acm) first, then installed Samsung Mobile USB modem and another driver for Samsung Mobile MTP device.

if connected to PC, it isn't recognized, it
>> No Samsung USB drivers installed .
it doesn't seem to charge,
> Dead battery replace or try leaving on charge 24 hours .

JJEgan said:
if connected to PC, it isn't recognized, it
>> No Samsung USB drivers installed .
it doesn't seem to charge,
> Dead battery replace or try leaving on charge 24 hours .
Click to expand...
Click to collapse
Unfortunately it's not a driver problem: I have all drivers installed and another Note 10.1 I have is been recognized fine.
I don't think it's a battery problem. I recharged it for more than 24 hours, but without results.
I have a usb hub that has leds on it. When something is connected to the hub, the led lights up. Well, when I connect this GT-N8000 no lights come up at first. To make it being recognized from the pc, I have to play with volumes buttons and power button. Then I can make it recognized, but still nothing happens on screen.

DS-1 said:
Unfortunately it's not a driver problem: I have all drivers installed and another Note 10.1 I have is been recognized fine.
I don't think it's a battery problem. I recharged it for more than 24 hours, but without results.
I have a usb hub that has leds on it. When something is connected to the hub, the led lights up. Well, when I connect this GT-N8000 no lights come up at first. To make it being recognized from the pc, I have to play with volumes buttons and power button. Then I can make it recognized, but still nothing happens on screen.
Click to expand...
Click to collapse
I have the same problem since yesterday. Did you finally found a solution to your problem ?
TIA

Don't use a hub.Use the Samsung cable .
Sent from my SM-N930F using XDA-Developers mobile app

JJEgan said:
Don't use a hub.Use the Samsung cable .
Sent from my SM-N930F using XDA-Developers mobile app
Click to expand...
Click to collapse
I used the hub just because it has a light on every usb port and it makes me understand if the tablet is recognized or not by the system. By the way, I tried to connect it straight to the mainboard usb and I still got the same problem.

[help] my android device can't recognize usb from pc or otg, what should i do?

I was buy android phone 9 days ago.
First case, my battery indicator stuck on 50%, after use or charge only stuck on 50%.
Second case, when i connect my phone to pc, nothing happen, only charging indicator.. Nothing popup mtp or storage device option or something.. I have enable usb debugging on developer option.
And another testing, I try connect my usb OTG type-C, but my phone cant detect my otg..
What should i do to fix this issue? This is bugs on my ROM or from my usb type-C phone connector broken?
pls help me :''/
Sorry i can't added picture, beause my phone totally can't use after all experiment and wipe all data..
Stuck with TWRP and "No OS installed".
Btw, I can't insert ROM files to my device, because my phone cant recognize my pc or transfer data via usb..
feels life on flintstones century, disconnect communication from all my friend more than 3 days :'(