Connected 7.0 plus to computer, after a while it went to sleep. Pressed the power key, so it will wake. In the windows explore I can't find the 7.0 plus any more. If I don't want to pull the cable out and insert it back, any way to reconnect the USB? It shows USB was connected, but nothing in windows explore.
I don't know if this will help, but when I use usb stick, after performing copying files etc, then safely remove usb, it won't recognize a different usb drive. So I re-boot and then it recognizes all again
Related
I've had my g1 for about 2 weeks. I have root. I have the RC33 update. I was able to connect to a pc after this update then one day I tried to get this song off of the computer so I plugged in the phone and it said "found new hardware"....I have tried everything different pc's different usb ports,different storage cards,....I tried the anycut app method....failed on one pc it opened on my laptop and then shut off again....I've soft reset,hard reset...removd the card and put it back in...no luck...any one with the answer please help...I will love you long time!
And the pc does recognize the phone is plugged up because its charging...
Hi,
Found new hardware means it was trying to install the usb drivers for your g1.
If this was not done correctly, than several things won't work like adb.
So that's what that message is.
But unplug your phone and go into settings, applications, development uncheck the box that says usb debugging,
Exit out and connect your cable, mount you drive and you can transfer files back and forth again.
Ok I did that but the box was already unchecked...so I plugged up the phone...and nothing happens so I check the box and the g1 acknowleded the pc and vise versa....and the installation wizard is for Android Phone...and is asking for an installation disk...so now I'm back to square 1...
Once you have plugged in the USB cable and Windows has recognized your phone (i.e. no new hardware found dialog anymore), you need to pull down the notification bar of the G1 and click on "connected to USB" or something along those lines. The phone will then give you an option to mount the SD card for read/write over the USB cable.
So this is the first android phone I have had where it is a royal pita to connect via USB. I have to disconnect and reconnect it a few times before it actually decides to connect. Once I do get it connected it refuses to let me unmount the sdcard volume. I keep on ejecting it but it keeps on re-appearing. And of course I can just disconnect it without a clean dismount but that is just wrong ...
Anyone else having issues ejecting the Droid Charge after connecting?
Mine does the same thing. I haven't found a way to eject it properly, but I'm a Mac noob.
I have my Charge set to act as Mass Storage when it detects a USB connection.
Go to: Settings > USB Settings> Mass Storage
Now, whenever you connect it to the Mac (or Windows box), the Notification bar will say that USB is connected. Select that Notification. Hit "Connect USB Storage" button on that screen and you shouldn't fail to mount. If you do, check your cable--it might be bad/going bad/un-plugged...
As far as ejecting the SD card, don't worry about it. There is no clean way to un-mount it. Just yank the cord. Issues will only occur if you do that while it's transferring stuff.
Hello Gents,
I purchased a USB OTG for my 7+ last week, all was working. the USB drives works, mouse works.
But this morning, when I tried to use the same mouse/usb drives. The tab does not seem to recognized the USB, I can see the LED on the USB blinks for a few moment and then turn off. Like it's getting power but then stop.
I tried the following.
1. reboot the tab. power on , power off. No go.
2. reboot from factory default ( yes it drives me nuts, but I did it anyway) Power Volume Up. Factory reset, data wipe. No go.
3. tried a new OTG USB cable, still does not work.
I had the Tab root before, but after the system reset, it gone back to stock firmware. The only thing I can think of is I did the latest Samsung Patch after my initial test.
When I look at the "dmesg"
s5p-ehci: detected XactErr len 0/8 retry
tspdrv: ImmVibeSPI_ForceOut_AmpEnable (1)
ImmVibeSPI_ForceOut_AMpDisable...
Does anyone have solution for this problem?
Thank
P.S. these are not the OEM Samsung USB cable. But they were working before.
Also, when I plug in an portable external HDD, it does say, High power device not supported.
hi,,,
try to connect all tools to usb otg hub first before you conect it to GTab. i mean if you want to connect a flash disk or a mouse, connect them to the usb otg hub first before connect it to GTab.
for hdd, you have to connect a power supply to usb otg to make it readable on GTab. i use my old nokia charger to power the usb otg hub device.
hope it help and sorry for my bad english.
dan
edit : i use this device as usb otg hub
http://db.tt/fmw1MhTY
I have the same error.
I have the same error but when I reboot my Tab, it's ok, before reboot I do not disconnect USB from my tab!You can try!
Hello.
Short story: my phone was a little wet and i have some issues with it, mostly i want to get a mass storage to get working. (cant root)
Basically at first the phone didn't even want to charge, when i connected it to the PC windows was giving me an error that the device cannot be recognized, and couldn't install the drivers. (i had Kies installed)
I dried it completely, now the phone turns on without any problem, when i connect it to the pc the phone is recognizing connection (i hear sound + the button backlights are firing up for a sec)
Homever, windows is not detecting any USB device at all, and in about phone/info it says the phone is connected to the AC instead of USB.
When i connect it with USB there is no dropdown in notification to choose from charging, storage etc.
There is also manual usb storage mounting under settings/communication/usb settings , when i'm trying to mount here it just says to connect the phone with usb cable (not detecting connection, homever the backlight + sound is here after connecting, and it's charging)
I tried connecting it with usb debugging on/off even tried to fiddle with in service menu (*#7284#) but nothing.
And since i cannot get the usb storage working basically i cannot flash anything or root it.
Also the USB cable is not a Samsung but an HTC one, could this be a problem? (people in different thread said those cables are the same so it shouldnt be a problem, same amperage, same stick etc.)
Even tried to install MountUSB Widget from market, but it doesn't work when im trying to start the app it's force closing, when i make widget on desktop and press it the phone just vibrate for 1 sec and nothing happens.
When i connect phone with Kies AIR and it works, i mean it shows the storage information, also recognize the phone model correctly, how much free space i have on internal and on SD card but i cannot click "show in explorer" it's greyed out.
Any experts out there could help me? :crying:
Just a blind guess, try a USB cable which supports your device. If it doesn't help, I'm afraid it's a hardware problem and you will have to consult some hardware expert.
When I want to transfer bigger files from my computer to the tablet, via in USB cable, all the time my tablet is disconnecting from the computer - of course in progress. I experiencing this problem with Hisuit and without Hisuit on the computer. I tried to not use the tablet, when I transferring something into it, but it's the same: in progress and disconnect. I had a windows 7 pc and now with a windows 10 pc, when I use a USB 2.0 or USB 3.0 port, it's nevermind: same deal. I using the original USB Micro-B cable. My computer is not busy with other things, I do nothing with my pc & tablet when I transferring some files to my tablet. But strangely, when the transfer is stopped and my tablet somehow disconnected from my pc, I get an error message, in my pc, but I can't see the window, so I made a picture with my phone. I don't know what's the problem.