Related
downloaded twrp 3, was running 5.1.1 on my phone and rooted it. tried to flash a rom and got stuck in a bootloop, now I cant boot into twrp, or anything for that matter. All i can do is hold volume down and power and home and try to ODIN a new bootloader or such and it just fails. what do i do? but when I try to boot into TWRP it goes into a blueish screen with a White exclamation mark saying "An error has occurred while updating the device software. Use the Emergency recovery function in the smart switch PC software. I tried to do that but it didnt even recognize the device. At this point i dont care about the data, I just need a working device
Okay, so I attempted to unroot and flash the stock 5.0.2 software and I got a error on the download screen. It says SW REV. CHECK FAIL. DEVICE: 3. BINARY: 1.
If you have no knox install MM official then flash this kernel tar file (AP) https://drive.google.com/folderview?id=0B40ItdHKfkyQcTA5bnRPWDg0X28&usp=drive_web#list it will boot to mm 5min :good:
Btw you cann downgrade from 5.1.1 to 5.0.1 you just go up not down
zach616 said:
downloaded twrp 3, was running 5.1.1 on my phone and rooted it. tried to flash a rom and got stuck in a bootloop, now I cant boot into twrp, or anything for that matter. All i can do is hold volume down and power and home and try to ODIN a new bootloader or such and it just fails. what do i do? but when I try to boot into TWRP it goes into a blueish screen with a White exclamation mark saying "An error has occurred while updating the device software. Use the Emergency recovery function in the smart switch PC software. I tried to do that but it didnt even recognize the device. At this point i dont care about the data, I just need a working device
Click to expand...
Click to collapse
Happened to me a lot of times in the past few days trying to get MM, for some weird reason flashing Unikernel always works for me (takes me to recovery screen after, then i select 'reboot now'), and all my data, apps etc are still there
emcardle660 said:
Happened to me a lot of times in the past few days trying to get MM, for some weird reason flashing Unikernel always works for me (takes me to recovery screen after, then i select 'reboot now'), and all my data, apps etc are still there
Click to expand...
Click to collapse
will try and update. thank you. didnt work.
Okay guys so now I need a ROM to flash using ODIN. I tried to download from sammobile but the speeds are too damn slow. What I tried to flash was this file " G920TUVU1AOCG_G920TTMB1AOCG_G920TUVU1AOCG_HOME.tar.md5 " and i got the error 3 to 1.
Download Samfirm from here, XDA itself.
Run samfirm, enter model as G920F and your region code.
It will download from Samsung servers, so high speed.
Now flash using Odin the downloaded file by putting the phone in download mode, (vol down+home+power on).
How did it happen?
Did you try to flash the VOD 6.0.1 and got stuck towards the end at hidden.IMG failing the process?
If yes, then its a two minute job. Just open the 6.0.1 tar archive and look for hidden.IMG extract it anywhere and rename it from "hidden.img" to "hidden.img.tar".
Note flash this hidden.img.tar as AP in download mode, your phone should boot.
I rooted my phone a while ago in like April and for some reason it became unrooted a couple days ago for no apparent reason.
I tried Autoroot without success so then I tried TWRP without success because when I tried to boot into recovery I got a big red screen.
"****" I said but was able to boot up and decided to do a factory restore and then restore the firmware to stock with odin
This proved to be a huge mistake because after factory resetting the phone, it won't boot or go into download mode. It just shows this:
"Recovery not standard enforcing" then
http://i.imgur.com/Ky2D6hR.jpg
vid: https://www.dropbox.com/s/4488hz6wizmhozj/VID_20160712_132305.mp4?dl=0
Anything I can do or should I just sell it for parts at this point?:
No, it is hard to brick... but you have to follow the instruction carefully... your error is the consequence of ignoring...
Take a breath and start from the beginning... first install via odin a clean original image
How do I install an image with odin if the phone won't go into download mode?
Tattered said:
How do I install an image with odin if the phone won't go into download mode?
Click to expand...
Click to collapse
Hello,
1. first, try the normal procedure by pressing POWER+VOL DOWN. This will force your device to hard reboot. When the screen comes black press immediately POWER+VOL DOWN+HOME to get on Download Mode
2. Install Odin on your windows and download the official ROM from the SamMobile's site
3. Not that much ahead the last step. Just open the correct files inside the ROM folder with odin and flash it
| IMPORTANT |
If you really can get to Download Mode DON'T forget to flash the BT file (bootloader) inside the ROM's folder. In other words, flash every file inside that folder and your device will boot
There is no chance of getting bootloop with official firmwares. So just be patient in the very first boot
Everytime I try to unroot my phone with Odin it says the process failed and Auth failed, someone please help..
Download stock firmware from the primary root guide. Use Odin and select all three the ap and the two below it. This will recover you to stock. Without root. But first do a titanium backup or a nandroid backup of all your apps and contact.
Sent from my SM-G930V using XDA-Developers mobile app
I tried but it still says failed... in Odin I put in all BL AP CP and CSC files, in the left text box it says FAIL! (Auth). I've tried this multiple times but it failed.. am I doing something wrong? Will I not be able to unroot my phone.. it's a SM-930T
Antaru123 said:
I tried but it still says failed... in Odin I put in all BL AP CP and CSC files, in the left text box it says FAIL! (Auth). I've tried this multiple times but it failed.. am I doing something wrong? Will I not be able to unroot my phone.. it's a SM-930T
Click to expand...
Click to collapse
Have you tried going into super su and hitting on permanent unroot also heres a guide goto the bottom and there should be a part that says full unroot. Link: http://forum.xda-developers.com/ver...-to-notes-root-install-xposed-unroot-t3411039 goto page 1 wont goto page 1 even after editing it oh well. Lol
I've done that too and it says FAILED then the SuperSU app disappears from my phone
Antaru123 said:
I've done that too and it says FAILED then the SuperSU app disappears from my phone
Click to expand...
Click to collapse
Try rerooting the phone through ODIN also make sure you are using the lastest ODIN if you need to boot into recovery and do factory reset and cleat cache but BACK YOU STUFF UP!!! Also what is you model number ex: SM-G935x
Edit also make sure u have secure start up off and have you lockscreen password off just in case
Well uh. now my phone is stuck in recovery mode and won't even start up normally.. and it's the SM-G930T
Antaru123 said:
Well uh. now my phone is stuck in recovery mode and won't even start up normally.. and it's the SM-G930T
Click to expand...
Click to collapse
Hate to say this again but just to make sure did you try doing factory reset and clear cache. Also if its still stuck then use odin to flash the s7 engineer root file then go into recovery mode and then clear cache and factory reset it should work fixed my boot loop when my phone was doing it.
I did all this Odin still fails, I've tried all three downloads from XDA for SM-930T which is my phone
Antaru123 said:
I did all this Odin still fails, I've tried all three downloads from XDA for SM-930T which is my phone
Click to expand...
Click to collapse
Well if worst come to it goto best buy and goto the samsung depart ment and belike my phone is stuck in a boot loop and they told me to have you guys reflash it. Thats what i did when my recovery was messed up and had a boot loop. Just tell them that the only thing that works is download mode or if they boot into recovery mode be like the factory reset doesnt do any thing. But i would say do this if its and absolute last option. I would say look around the fourms and mess around with it a bit more and ill do the same since you already tried petty much every thing.
Trying to unroot
Same issue here with 930T. Had rooted and was unsatisfied but I tried flashing TWRP and now I can't even boot into recovery, goes straight into home screen. Now I can't unroot after trying ODIN, SuperSU, Samsung Switch etc. Would love some help.
Make sure you actually try each one of these steps - I actually tried all these steps, and the last step worked for me. Took me 5-6 hours to unroot my phone. I use a Samsung S7 (SM-G930W8).
1. USB Cable matters. Try a different USB cable (best if it is the OEM one, if not one that gives enough power)
2. Plug into a USB 2.0 instead of a USB 3.0
3. Uninstall Kies
4. Re-install your Samsung USB drivers
5. Use a different computer
6. Use a older version of Odin (3.10 did not work for me, when I changed to 3.9 it worked)
Why not just initialize using smart switch.
So I would suggest going to this post here and downloading the ODIN 3.12
http://forum.xda-developers.com/showthread.php?t=2711451
I was trying to unroot for a clean root and this one worked for me the one made by PrinceComsy did not work for the flashing the stock ROM but it did work for flashing the ENG Boot ROM. I used 3 out of the 4 file to flash the stock rom I didn't select the BL file at all but you can if you want.
If you need any further assistance/help please reply to this and I will try to assist you further.
bfixer117 said:
So I would suggest going to this post here and downloading the ODIN 3.12
http://forum.xda-developers.com/showthread.php?t=2711451
I was trying to unroot for a clean root and this one worked for me the one made by PrinceComsy did not work for the flashing the stock ROM but it did work for flashing the ENG Boot ROM. I used 3 out of the 4 file to flash the stock rom I didn't select the BL file at all but you can if you want.
If you need any further assistance/help please reply to this and I will try to assist you further.
Click to expand...
Click to collapse
Could the issue be the stock firmware? I tried to get mine from GalaxyS7R.. and not trying from SamMobi...
I receive the same errors on PC and on device I am receiving SW REV CHECK FAIL: [about]Fused 3> Binary 2
[1] eWWC write fail: aboot
I am able to boot back into my phone but simply cannot restore back to original stock.
spaz2045 said:
Could the issue be the stock firmware? I tried to get mine from GalaxyS7R.. and not trying from SamMobi...
I receive the same errors on PC and on device I am receiving SW REV CHECK FAIL: [about]Fused 3> Binary 2
[1] eWWC write fail: aboot
I am able to boot back into my phone but simply cannot restore back to original stock.
Click to expand...
Click to collapse
Figured this out myself..need to use the correct build (there are 4 or 5 for TMO)...
Hi,
I have S8 Plus SM-G955F in Germany.
Dont knwo what exactly happend, but my phone was just still running fine (bootloader is unlocked) and I rebooted but then was stuck at "Installing system updates" screen which appear before getting into recovery. However, it does not enter into recovery and reboots after few seconds into "installing updates" mode which then fails.
It does not boot up into Android.
All I can access to is Download Mode.
I flashed "BL_G955FXXU1AQF7_CL11544126_QB13847503_REV00_user_low_ship.tar" Bootloader and rebooted and now it is stuck in Samsung boot logo. If I press Vol up + Bixpy Button + Power nothing happends, it does not even start to load Recovery mode.
I now downloaded following stock firmware through SamFirm: "SM-G955F_1_20171214140840_hlcm4r582t_fac.zip.enc4" (3332 MB)
but when trying to flash it in odin I get FAILED !!! Also if I try to flash TWRP recovery "twrp-3.1.0-1-dream2lte.img" I get FAILED in Odin I now also tried to flash "AP_G955FXXU1AQH3_CL12050265_QB14545623_REV00" firmware using this tutorial: https://www.youtube.com/watch?v=2y0ZZxcNVnE which also FAILED. I think I am completely bricked !!
Please help, phone is completeley useless now
Thanks!
tobyffm said:
SM-G955F_1_20171214140840_hlcm4r582t_fac.zip.enc4" (3332 MB)
Click to expand...
Click to collapse
I had the same problem with downloading stock firmware. My problem was that I couldn't download from SamMobile because of server maintenance. So I downloaded from here. An with this tool there's the option to decrypt the file automatically. I forgot to tick this option and had a .enc4-file like you have there. The problem could decrypt this file and then I could unzip it and use it with odin.
So that's your problem: you are trying to use an encrypted file. But you have to use an decrypted file.
Maltonator said:
I had the same problem with downloading stock firmware. My problem was that I couldn't download from SamMobile because of server maintenance. So I downloaded from here. An with this tool there's the option to decrypt the file automatically. I forgot to tick this option and had a .enc4-file like you have there. The problem could decrypt this file and then I could unzip it and use it with odin.
So that's your problem: you are trying to use an encrypted file. But you have to use an decrypted file.
Click to expand...
Click to collapse
Hi,
thank you! But its actually not my problem. Samfirm decrypted and I got the zip with the BL, AP, CSC, CP files in it. But ODIN fails everytime anyway and I have no idea what I could still do now.
tobyffm said:
Hi,
thank you! But its actually not my problem. Samfirm decrypted and I got the zip with the BL, AP, CSC, CP files in it. But ODIN fails everytime anyway and I have no idea what I could still do now.
Click to expand...
Click to collapse
But you flashed all four files at the same run together?
Maltonator said:
But you flashed all four files at the same run together?
Click to expand...
Click to collapse
Yes, like the howto video described.
tobyffm said:
Dont knwo what exactly happend, but my phone was just still running fine (bootloader is unlocked) and I rebooted but then was stuck at "Installing system updates" screen which appear before getting into recovery.
Click to expand...
Click to collapse
But this happens with my phone to if I press volume up.
tobyffm said:
If I press Vol up + Bixpy Button + Power nothing happends, it does not even start to load Recovery mode.
Click to expand...
Click to collapse
But you have to press Vol down
Maltonator said:
But this happens with my phone to if I press volume up.
But you have to press Vol down
Click to expand...
Click to collapse
Usual behaviour was this: Vol up, bixpy and Power -> Recovery mode which fist starts with "Installing update..." then failed and then it goes into some black recovery mode where you can choose Apply update.zip etc. right? However, in my case this black screen with more commands did not show up, before it was rebooting again by itself.
Now I cannot even get into this "installing updates" mode before recovery, because "Vol up, bixpy and Power" does not bring any action.
Vol down, Bixpy and Power still works and brings me to Download Mode. But it doesnt help me, because once I tr to flash any firmware in Download Mode, it FAILS in Odin, so I am completely stuck, hope you understand
tobyffm said:
Usual behaviour was this: Vol up, bixpy and Power -> Recovery mode which fist starts with "Installing update..." then failed and then it goes into some black recovery mode where you can choose Apply update.zip etc. right? However, in my case this black screen with more commands did not show up, before it was rebooting again by itself.
Now I cannot even get into this "installing updates" mode before recovery, because "Vol up, bixpy and Power" does not bring any action.
Click to expand...
Click to collapse
But why do you boot in recovery mode?
tobyffm said:
Vol down, Bixpy and Power still works and brings me to Download Mode. But it doesnt help me, because once I tr to flash any firmware in Download Mode, it FAILS in Odin, so I am completely stuck, hope you understand
Click to expand...
Click to collapse
Download mode is the only mode you need for restoring stock firmware.
Try this guide. (Spoiler "Flashing Standard Firmware:")
Yesterday I did it with this one too and it worked flawlessly. But I used Odin v3.12.3 not as said in the guide V3.12.7.
Maltonator said:
But why do you boot in recovery mode?
Download mode is the only mode you need for restoring stock firmware.
Try this guide. (Spoiler "Flashing Standard Firmware:")
Yesterday I did it with this one too and it worked flawlessly. But I used Odin v3.12.3 not as said in the guide V3.12.7.
Click to expand...
Click to collapse
it automatically loaded into recovery before, I was not able to boot into Android, it loaded recovery (but without black screen with more commands) automatically by default and rebooted, loaded recovery again and rebooted, loaded recovery againd and rebooted etc...all I could to to interrupt this was loading download mode.
However, thanks for the link, but it does describe what I did already. And yes, I also used Odin 3.12.3 already because in the video tutorial I linked some posts before they said also, I need to use that version.
However, it simply does not work. Odin FAILS everytime
I am not doing anything wrong, I am sure. The only thing could be that the Firmware I downloaded is still wrong, even I cannot imagine this.
tobyffm said:
I am not doing anything wrong, I am sure. The only thing could be that the Firmware I downloaded is still wrong, even I cannot imagine this.
Click to expand...
Click to collapse
Yes that's the only thing that comes on my mind too if you think everything else is right. Download another firmware file maybe from a different provider than SamMobile.
Or try using different USB-Port, USB-Cable and/or different PC.
Maltonator said:
Yes that's the only thing that comes on my mind too if you think everything else is right. Download another firmware file maybe from a different provider than SamMobile.
Or try using different USB-Port, USB-Cable and/or different PC.
Click to expand...
Click to collapse
Did already, did not help. I think maybe there is something realldy bricked, so flashing stock firmware wont be possible at all anymore?! Is this possible somehow?
btw: Just managed to load into TWRP, randomly it does load twrp, dont know how, because if I press the keys for loading into recovery, it actually does not do anything, but currently I see twrp.
Is see anything I can try from there? btw: formated data (incl. internal storage) earlier already, but it did not change anything.
But any idea what I can try to flash from TWRP maybe? Is there a way to flash stock firmware from TWRP somehow?
I found a backup in twrp, I am currently trying to restore it...
tobyffm said:
But any idea what I can try to flash from TWRP maybe? Is there a way to flash stock firmware from TWRP somehow?
I found a backup in twrp, I am currently trying to restore it...
Click to expand...
Click to collapse
Google found this. But I don't know if this works. I only flashed custom ROMs via TWRP. Stock ROMs always via Odin.
Maltonator said:
Google found this. But I don't know if this works. I only flashed custom ROMs via TWRP. Stock ROMs always via Odin.
Click to expand...
Click to collapse
Puuuuh, I was able to fix phone with hat TWRP backup I found!
Thanks for your efforts anyway, much appreciated!
tobyffm said:
Puuuuh, I was able to fix phone with hat TWRP backup I found!
Thanks for your efforts anyway, much appreciated!
Click to expand...
Click to collapse
Glad it worked! :good:
tobyffm said:
it automatically loaded into recovery before, I was not able to boot into Android, it loaded recovery (but without black screen with more commands) automatically by default and rebooted, loaded recovery again and rebooted, loaded recovery againd and rebooted etc...all I could to to interrupt this was loading download mode.
However, thanks for the link, but it does describe what I did already. And yes, I also used Odin 3.12.3 already because in the video tutorial I linked some posts before they said also, I need to use that version.
However, it simply does not work. Odin FAILS everytime
I am not doing anything wrong, I am sure. The only thing could be that the Firmware I downloaded is still wrong, even I cannot imagine this.
Click to expand...
Click to collapse
My mistake, sorry - I posted in the wrong place- sorry. (I do hope you find a way to get t his fixed) good luck
I just ran into this thread: https://forum.xda-developers.com/galaxy-s8/help/stuck-bootloop-flashing-aqg5-fix-t3636857
It looks like you're not the only one...
You know, you might want to try and remove the more current apps you installed and see if that is causing the loop, and if that does not work, just dirty flash over what you have. For me, a lot of time a dirty flash will solve the issue, as it overwrites the OEM software, and in that manner, takes my phone OS back to normal/new state, while leaving my data.
I made a huge mistake, unticked OEM unlock in developer settings when I was on DEVBASE rom (G930FXXS6ESGD_DevBase_v6.0_encrypt.zip), and now what I'm able to do is:
- flash combination file: COMBINATION_FA60_G930FXXU3ARI2_CL7964511_QB19635501_REV00_user_mid_noship.tar.md5, this way I am able to enter recovery and download mode.
- flash stock rom via Odin: G930FXXS3ERLF_G930FORX3ERKF_ORX. After flashing, phone reboots blue screen "sotware update", then "Erasing" , unexpectedly restarts before finishing erasing, and then yellow triangle, " no command". Unable to enter recovery(black screen: #fail to open recovery_cause....), device is stuck in bootloop or I can get to Download mode, but can't turn off the phone.
what can I do? any help appreciated:angel:
lulzor said:
I made a huge mistake, unticked OEM unlock in developer settings when I was on DEVBASE rom (G930FXXS6ESGD_DevBase_v6.0_encrypt.zip), and now what I'm able to do is:
- flash combination file: COMBINATION_FA60_G930FXXU3ARI2_CL7964511_QB19635501_REV00_user_mid_noship.tar.md5, this way I am able to enter recovery and download mode.
- flash stock rom via Odin: G930FXXS3ERLF_G930FORX3ERKF_ORX. After flashing, phone reboots blue screen "sotware update", then "Erasing" , unexpectedly restarts before finishing erasing, and then yellow triangle, " no command". Unable to enter recovery(black screen: #fail to open recovery_cause....), device is stuck in bootloop or I can get to Download mode, but can't turn off the phone.
what can I do? any help appreciated:angel:
Click to expand...
Click to collapse
when it goes to the "no command" screen, what happens if you let it sit on that screen for about 3 min or so? also, have you tries keis? i hate keis, but it helped me recover a phone a time or 2 in the past
youdoofus said:
when it goes to the "no command" screen, what happens if you let it sit on that screen for about 3 min or so? also, have you tries keis? i hate keis, but it helped me recover a phone a time or 2 in the past
Click to expand...
Click to collapse
1. it keeps rebooting and heats up
2. Kies doesn't want to connect, but even if it could....I think there is only 1 way: "Firmware upgrade and initialization" menu.... entering model number SM-G930F, and Serial Number ??????
(I was able to look my serial number up in this Factory Binary rom/Combination rom, but Kies states it's not correct which I believe - it looks kinda weird though. I am unable to find my box, since I got this phone used. I don't want to disassemble the back cover to check it on the battery because I would loose water resistance :/ )
Update: I have the box, also I spot the S/N on the back cover
I'm able to flash via Odin U3/S3 roms only(which are designed to my region), but it doesn't remove FRP LOCK...It was be good if any rom could start the google auth process, cause I have access to my google account, it's a silly thing that I got locked out from my system... :crying:
lulzor said:
I'm able to flash via Odin U3/S3 roms only(which are designed to my region), but it doesn't remove FRP LOCK...It was be good if any rom could start the google auth process, cause I have access to my google account, it's a silly thing that I got locked out from my system... :crying:
Click to expand...
Click to collapse
have you tried entering your own gmail account info in the fields where its asking for the previous users info?
the problem is that I can't even get into this menu, none of the stock roms I'm able to flash are booting up, except the Factory Binary (Combination rom). Even the lowest security rom is S3...? That one is actually not bootlooping, able to turn off device, but not booting up, recovery is working here and download mode.
I'm afraid that only a Z3X box software, with the physical box and cable could save this phone....
After ~20h work finally got into the phone!!!
https://www.youtube.com/watch?v=NplMF8O2aTk
this tutorial helped!
So the steps:
1. flash your device compatible Combination file with Odin
2. boot up, enable developer options, check usb debugging to be enabled
3. reboot into recovery, do a factory reset
4. enter Download mode
5. repack your device compatible stock rom's "AP.... .tar.md5" file into a new .tar file so it only contains: boot.img, sboot.bin, system.img
6. flash with odin, enjoy!
7. thank to this guy from the video
lulzor said:
the problem is that I can't even get into this menu, none of the stock roms I'm able to flash are booting up, except the Factory Binary (Combination rom). Even the lowest security rom is S3...? That one is actually not bootlooping, able to turn off device, but not booting up, recovery is working here and download mode.
I'm afraid that only a Z3X box software, with the physical box and cable could save this phone....
Click to expand...
Click to collapse
lulzor said:
After ~20h work finally got into the phone!!!
https://www.youtube.com/watch?v=NplMF8O2aTk
this tutorial helped!
So the steps:
1. flash your device compatible Combination file with Odin
2. boot up, enable developer options, check usb debugging to be enabled
3. reboot into recovery, do a factory reset
4. enter Download mode
5. repack your device compatible stock rom's "AP.... .tar.md5" file into a new .tar file so it only contains: boot.img, sboot.bin, system.img
6. flash with odin, enjoy!
7. thank to this guy from the video
Click to expand...
Click to collapse
awesome to hear that you got past the FRP lock!