Hey guys,
I just got my phone and it updated to 4.4 pretty much out of the box. I still wanted to root so I used a method I found on here (will find if necessary) which is supposed to not trip the KNOX by putting the phone into "Custom Mode." Everything went fine until I tried to use ROM Manager to install CM.
When I boot I get the message "System software not authorized by Verizon Wireless has been found on your phone. Please turn off your phone and go to the nearest Verizon Wireless store for help." I've tried reflashing using Odin, clearing the cache and factory resets, but I get the same error every time.
I'm currently downloading another stock ROM which might work, but I wanted to see if anyone else has had this problem?
Thank you!
mortified21 said:
Hey guys,
I just got my phone and it updated to 4.4 pretty much out of the box. I still wanted to root so I used a method I found on here (will find if necessary) which is supposed to not trip the KNOX by putting the phone into "Custom Mode." Everything went fine until I tried to use ROM Manager to install CM.
When I boot I get the message "System software not authorized by Verizon Wireless has been found on your phone. Please turn off your phone and go to the nearest Verizon Wireless store for help." I've tried reflashing using Odin, clearing the cache and factory resets, but I get the same error every time.
I'm currently downloading another stock ROM which might work, but I wanted to see if anyone else has had this problem?
Thank you!
Click to expand...
Click to collapse
You are permanently stuck on the TW 4.3 OTA because the bootloader is signed with special keys that prevents:
-installing a custom recovery
-flashing custom roms/kernels
-downgrading your software below 4.3
If you can boot into download mode, do this 4.3 soft brick method.
With TW 4.3 OTA, all you can do is root using a tool called: Saferoot.
If you have 4.3 stock firmware you can root and that's it, no custom recovery, no custom rom, kernel, nothing, and just a heads up there are like 10 threads where people don't read and have done what you have, you need to flash the Odin 4.3 image for you phone to work again, never take an ota, enjoy your locked down device now
Sent from my SCH-I535 using XDA Premium 4 mobile app
SlimSnoopOS said:
You are permanently stuck on the TW 4.3 OTA because the bootloader is signed with special keys that prevents:
-installing a custom recovery
-flashing custom roms/kernels
-downgrading your software below 4.3
If you can boot into download mode, do this 4.3 soft brick method.
With TW 4.3 OTA, all you can do is root using a tool called: Saferoot.
Click to expand...
Click to collapse
Worked perfectly! Thank you so much!
mortified21 said:
Worked perfectly! Thank you so much!
Click to expand...
Click to collapse
My pleasure but all the thanks is owed to ThePagel, make sure to post your success in his thread. The more people that report their success with that method, then the less fear someone else may have in using that should they suffer the same experiences. :victory::good::good:
If you need any updates on the state of TW 4.3 then keep this discussion thread bookmarked.
I did the same thing today. The 4.3 update installed by itself!!! So i rooted it using Saferoot,
i installed rom manager, clicked the Install rom from sd card and i got that message. it will repeat that message and it wont boot. So i went into Odin mode and hit the volume down button to restart it. And after that it booted normally.
So basically i am stuck with 4.3? and is there 4.4 out for our phones yet?
also forgot to mention, it says my OS is custom when i first realized it updated.
AURMEND said:
I did the same thing today. The 4.3 update installed by itself!!! So i rooted it using Saferoot,
i installed rom manager, clicked the Install rom from sd card and i got that message. it will repeat that message and it wont boot. So i went into Odin mode and hit the volume down button to restart it. And after that it booted normally.
So basically i am stuck with 4.3? and is there 4.4 out for our phones yet?
also forgot to mention, it says my OS is custom when i first realized it updated.
Click to expand...
Click to collapse
Once you successfully updated with 4.3, you stuck with 4.3, there is no going back or flash anything and 4.3 is the latest factory rom for now. There's no 4.4 yet for our phone. There is custom 4.4 but only for people who didn't take the 4.3 update. Since they still have unlocked bootloader so they could load any custom rom.
buhohitr said:
Once you successfully updated with 4.3, you stuck with 4.3, there is no going back or flash anything and 4.3 is the latest factory rom for now. There's no 4.4 yet for our phone. There is custom 4.4 but only for people who didn't take the 4.3 update. Since they still have unlocked bootloader so they could load any custom rom.
Click to expand...
Click to collapse
Dang this sucks. I have no idea how it installed automatically then. I was listening to music the whole time. And I was trying to get a custom 4.4 after the update...
AURMEND said:
Dang this sucks. I have no idea how it installed automatically then. I was listening to music the whole time. And I was trying to get a custom 4.4 after the update...
Click to expand...
Click to collapse
Yep! sucks big time!!
Related
I've noticed there was an update on kies this week (P3113UEBLH1), I'm not sure what it was thought.
I've tried upgrading in kies, it was stuck at 0% downloading then connection timed out.
The OTA update didn't find any updates available.
Then next morning, kies said no update available too.
So, Anyone got the update to work, and if so what changes did you notice?
The update is available for flashing with odin on samsung-updates.com , this is the 2nd 4.0.4 update. (I'm still running the old 4.0.4 (P3113UEBLG5))
I don't have it, but I can look into it...
Bibicp said:
I've noticed there was an update on kies this week (P3113UEBLH1), I'm not sure what it was thought.
I've tried upgrading in kies, it was stuck at 0% downloading then connection timed out.
The OTA update didn't find any updates available.
Then next morning, kies said no update available too.
So, Anyone got the update to work, and if so what changes did you notice?
The update is available for flashing with odin on samsung-updates.com , this is the 2nd 4.0.4 update. (I'm still running the old 4.0.4 (P3113UEBLG5))
Click to expand...
Click to collapse
My device is rooted, and the only backup I made with CWM was after I rooted, if I go to update (if my device can find it) will I:
1) Brick out and be screwed?
2) Have to flash my backup (which is rooted, so would that mean I can't update again?)
3) Be ok and keep my rooting?
4) Be ok, and lose my rooting, and have to re-root?
I realize I am kind of answering your question with a question, but I would be happy to see if I can track it down and see what changes there are, if it's safe to install.
FlynnErik said:
My device is rooted, and the only backup I made with CWM was after I rooted, if I go to update (if my device can find it) will I:
1) Brick out and be screwed?
2) Have to flash my backup (which is rooted, so would that mean I can't update again?)
3) Be ok and keep my rooting?
4) Be ok, and lose my rooting, and have to re-root?
I realize I am kind of answering your question with a question, but I would be happy to see if I can track it down and see what changes there are, if it's safe to install.
Click to expand...
Click to collapse
Try backing up your system using clockworkmod recovery first, then go to download mode, flash your firmware version (download from samfirmware or samsung-updates) and flash it with odin.
This way you're unrooted, running stock rom and stock recovery and then you can install the update.
I didn't try to install an update while rooted, but it's not recommended so don't try.
I did a back up after I rooted with CWM
Bibicp said:
Try backing up your system using clockworkmod recovery first, then go to download mode, flash your firmware version (download from samfirmware or samsung-updates) and flash it with odin.
This way you're unrooted, running stock rom and stock recovery and then you can install the update.
I didn't try to install an update while rooted, but it's not recommended so don't try.
Click to expand...
Click to collapse
So is my backup going to be rooted? Or will it be the stock? I am currently rooted stock 4.0.4.
Btw, I have found no information about the update anywhere on the net. Maybe they accidently did a push to us, and pulled it back?
Should I wipe cache, dalvik and FDR before I flash the firmware from those sites or use the backup I made already? (which I am unsure if I should even use since idk if it will be rooted or not lol)
I wasn't going to update till it was time to get JB, but this update that vanished is intriguing enough I might lol
As i know yes when you restore backup with cwm the result will be rooted also as the cwm takes image of the system when doing backup and as you when doing backup was rooted so when restore this backup you will be still rooted if you flash via odin no need to wipe cash and dalvik cash i never read anyone doing this
Even if you do this wipe no harm at all
Sent from my GT-I9100 using xda app-developers app
As mohamed selim said, but wipe your data and do a factory reset in clockworkmod (after backup)
and why will samsung pull back the update?
There's several reasons why this may happen
Bibicp said:
As mohamed selim said, but wipe your data and do a factory reset in clockworkmod (after backup)
and why will samsung pull back the update?
Click to expand...
Click to collapse
They pushed it out to the wrong devices
They pushed it out to early
They found a last minute bug and had to pull back
They are testing it, and not everyone should have gotten the option to get it.
Ok so to get things straight. If/when we go to JB I will need to download a firmware stock from one of the sites listed above, download it.
Do a backup (just to be safe of what I have now)
FDR/Wipe everything
Install the firmware using Odin
If everything looks good, re-flash CWM
Do another backup so I have a clean stock to revert back to down the road if needed.
That sum it up correctly? This way I can bookmark this thread so I don't forget lol.
**EDIT** When I use Odin to restore stock will I lose CWM? If so, what happens if something goes wrong in the Odin restore and I have a boot loop, or etc, what would be my next move since I won't have CWM to restore previous, would I be able to install it like I would if things were going ok?
Sorry for sounding like a n00b, I am still learning all about this, but I think I am getting closer to learning enough to not be a n00b lol. I only have 10 tabs open with this forum instead of 20!
FlynnErik said:
They pushed it out to the wrong devices
They pushed it out to early
They found a last minute bug and had to pull back
They are testing it, and not everyone should have gotten the option to get it.
Ok so to get things straight. If/when we go to JB I will need to download a firmware stock from one of the sites listed above, download it.
Do a backup (just to be safe of what I have now)
FDR/Wipe everything
Install the firmware using Odin
If everything looks good, re-flash CWM
Do another backup so I have a clean stock to revert back to down the road if needed.
That sum it up correctly? This way I can bookmark this thread so I don't forget lol.
**EDIT** When I use Odin to restore stock will I lose CWM? If so, what happens if something goes wrong in the Odin restore and I have a boot loop, or etc, what would be my next move since I won't have CWM to restore previous, would I be able to install it like I would if things were going ok?
Sorry for sounding like a n00b, I am still learning all about this, but I think I am getting closer to learning enough to not be a n00b lol. I only have 10 tabs open with this forum instead of 20!
Click to expand...
Click to collapse
It's not for the wrong device since it's saying P3113, and it's not jelly bean. as I've seen on samsung firmware.com it's 4.0.4.
Well, on my homescreen I put a shortcut for the software update, it still has a circle saying 'N" on it (which probably stands for new), but going in kies I don't find it, It only says it downloaded it but the firmware is up to date.
So probably either they really pulled it back, or it's a bug and they're fixing it. (I really can't wait for jelly bean)
Second, yes it will erase the CWM recovery and go back to stock recovery.
The common mistake people make to get a bootlop is not wiping data/doing a factory reset before flashing a new ROM, so you should go to recovery and do a factory reset, then go to download mode and flash the firmware with odin. If you ever get stuck in a bootloop, try pressing volume down + power key to get to download mode and re flash the ROM. if it's still stuck, try re-downloading the ROM files you downloaded, it could be corrupted.
Awesome!
Bibicp said:
It's not for the wrong device since it's saying P3113, and it's not jelly bean. as I've seen on samsung firmware.com it's 4.0.4.
Well, on my homescreen I put a shortcut for the software update, it still has a circle saying 'N" on it (which probably stands for new), but going in kies I don't find it, It only says it downloaded it but the firmware is up to date.
So probably either they really pulled it back, or it's a bug and they're fixing it. (I really can't wait for jelly bean)
Second, yes it will erase the CWM recovery and go back to stock recovery.
The common mistake people make to get a bootlop is not wiping data/doing a factory reset before flashing a new ROM, so you should go to recovery and do a factory reset, then go to download mode and flash the firmware with odin. If you ever get stuck in a bootloop, try pressing volume down + power key to get to download mode and re flash the ROM. if it's still stuck, try re-downloading the ROM files you downloaded, it could be corrupted.
Click to expand...
Click to collapse
So the one on the site even though its XAR is us? Can I ask why we have that tag? Not something like US or etc? I mean I don't care, just kinda curious since that would make it more simple to know which region gets what, at least for me it would lol.
Thank you so much for the help and the knowledge, I figured I would end up with stock recovery, which is why I wanted to make sure about what if something goes wrong.
As a side thought, where does the backup that CWM makes located? Can I copy and paste that on to my PC so I always have a back up handy? (I would sync it into the cloud). Can I flash that with odin down the road? Or is that only a CWM usable file?
Any more info on the firmware release?....Trying to download it now!
Firmware Version: P3113UEBLH1
OS: Ice Cream Sandwich
OS Version: v4.0.4
Release Date: 08-10-2012
Build Date: 08-10-2012
Changelist: 999349
Gizmo said:
Any more info on the firmware release?....Trying to download it now!
Firmware Version: P3113UEBLH1
OS: Ice Cream Sandwich
OS Version: v4.0.4
Release Date: 08-10-2012
Build Date: 08-10-2012
Changelist: 999349
Click to expand...
Click to collapse
That's all I know about it, where are you downloading it? samsung updates.com? or kies/OTA update?
Bibicp said:
That's all I know about it, where are you downloading it? samsung updates.com? or kies/OTA update?
Click to expand...
Click to collapse
I found it on some foreign site....samsung-updates.com won't let you download the P3113UEBLH1 firmware, Just the Kernel, I don't use Kies! Uploading it right now!
Gizmo said:
I found it on some foreign site....samsung-updates.com won't let you download the P3113UEBLH1 firmware, Just the Kernel, I don't use Kies! Uploading it right now!
Click to expand...
Click to collapse
Alright, tell me if you notice anything different.
Nice
good!
Im downloading it now. Ill post it when its rooted and deodexed
Bibicp said:
I've noticed there was an update on kies this week (P3113UEBLH1), I'm not sure what it was thought.
I've tried upgrading in kies, it was stuck at 0% downloading then connection timed out.
The OTA update didn't find any updates available.
Then next morning, kies said no update available too.
So, Anyone got the update to work, and if so what changes did you notice?
The update is available for flashing with odin on samsung-updates.com , this is the 2nd 4.0.4 update. (I'm still running the old 4.0.4 (P3113UEBLG5))
Click to expand...
Click to collapse
I tried updating it once with KIES and it got to a point and froze on the screen. I had to force the tablet to shut down and rebooted and the tablet was OK. Being a glutton for punishment I tried again with KIES and the LH1 update successfully updated my GT2 7 and the About screen confirms it. Directly after installing and rebooting I started getting error messages about Chrome crashing. I uninstalled Chrome browser and reinstalled it and all is well. No other problems. Do NOT really notice ANY difference at all.
The only problem I have is that NOW I have decided that I would like to root my GT2 7 and I am NOT sure the methods I see out there will work with the P3113UEBLH1 update.
Does anyone know if my GT2 7 - P3113UEBLH1 can be rooted safely??
grobin
I dont think IT is better than CM9
RomsWell said:
Im downloading it now. Ill post it when its rooted and deodexed
Click to expand...
Click to collapse
Can you please tell me what's different than the older UEBLG5 version? and btw can you upload the stock rom itself without root so I can test it? because I couldn't download :s
EDIT: I downloaded it via samsung-updates.com and flashed it with odin.
It's pretty much the same as UEBLG5 I didn't notice anything different, but I downgraded to UEBLG5 as samsung appears to have pushed back this update (UEBLH1), because when I connect the device to kies, it doesn't recognize it.
Bibicp said:
Can you please tell me what's different than the older UEBLG5 version? and btw can you upload the stock rom itself without root so I can test it? because I couldn't download :s
EDIT: I downloaded it via samsung-updates.com and flashed it with odin.
It's pretty much the same as UEBLG5 I didn't notice anything different, but I downgraded to UEBLG5 as samsung appears to have pushed back this update (UEBLH1), because when I connect the device to kies, it doesn't recognize it.
Click to expand...
Click to collapse
I think it broke wifi. Not sure what the change log says about it. If the Cam is fixed i think im just going to add it to the G5 update. And not bother posting this untill its confrimed OTA
RomsWell said:
I think it broke wifi. Not sure what the change log says about it. If the Cam is fixed i think im just going to add it to the G5 update. And not bother posting this untill its confrimed OTA
Click to expand...
Click to collapse
Sorry for the question, but what do you mean comfirmed OTA? Once kies told me about the UEBLG5 update, I couldn't install it with kies as it was lagging.
Next day I found it on the OTA update.
This one showed on kies for a day, then next day neither kies or the OTA udpates showed there was an update so it probably got pulled back?
My wife's rooted Samsung Galaxy S3 (vzw) has been acting strange lately. It has been asking to update and then locking into a screen that says "System software not authorized by Verizon..." I can successfully reset the phone, as well as get into Odin, but I cannot get into recovery mode to flash a new rom. (The first and only rom I flashed on her phone was stock Touchwiz about 8 months ago.)
I'm kind of a noob at this stuff, so I'm not sure what to do. First, I'm not sure why this is happening in the first place. My research shows that it can happen when you don't unlock the phone properly, but I'm virtually certain I did. In any event, what next? I have read that I should Odin back to stock. Is it appropriate for me to attempt to Odin back to a rooted stock rom? Is that even possible? For example, can I Odin back to this rom (http://forum.xda-developers.com/showthread.php?t=2332840)?
eyc said:
My wife's rooted Samsung Galaxy S3 (vzw) has been acting strange lately. It has been asking to update and then locking into a screen that says "System software not authorized by Verizon..." I can successfully reset the phone, as well as get into Odin, but I cannot get into recovery mode to flash a new rom. (The first and only rom I flashed on her phone was stock Touchwiz about 8 months ago.)
I'm kind of a noob at this stuff, so I'm not sure what to do. First, I'm not sure why this is happening in the first place. My research shows that it can happen when you don't unlock the phone properly, but I'm virtually certain I did. In any event, what next? I have read that I should Odin back to stock. Is it appropriate for me to attempt to Odin back to a rooted stock rom? Is that even possible? For example, can I Odin back to this rom (http://forum.xda-developers.com/showthread.php?t=2332840)?
Click to expand...
Click to collapse
the files that you use to odin with are a different extension (.tar) than what you flash with (.rar)...so you can only use cwm/twrp to use that rooted image. I recommend using odin to get back to stock, then using the root one click method that was recently stickied...that will get you up in running and able to use roms quickly
Yes its possible but first try to install a custom recovery. Download goomanager and then install open recovery script from the menu options. Then you should be able to boot into twrp and flash a new rom
Sent from my XT912 using xda app-developers app
eyc said:
My wife's rooted Samsung Galaxy S3 (vzw) has been acting strange lately. It has been asking to update and then locking into a screen that says "System software not authorized by Verizon..." I can successfully reset the phone, as well as get into Odin, but I cannot get into recovery mode to flash a new rom. (The first and only rom I flashed on her phone was stock Touchwiz about 8 months ago.)
I'm kind of a noob at this stuff, so I'm not sure what to do. First, I'm not sure why this is happening in the first place. My research shows that it can happen when you don't unlock the phone properly, but I'm virtually certain I did. In any event, what next? I have read that I should Odin back to stock. Is it appropriate for me to attempt to Odin back to a rooted stock rom? Is that even possible? For example, can I Odin back to this rom (http://forum.xda-developers.com/showthread.php?t=2332840)?
Click to expand...
Click to collapse
If you are Verizon Stock rooted and have SU and busybox installed without disabling updates, that will occur whenever Verizon rolls out an OTA. if you want the update, ODIN back to stock and take the updates before rooting. If you don;t want updates then find the thread on disable Verizon OTA and that will stop the update request.
First off, I have a Verizon GS3 (SCH-I535). As of this morning, it was running the new 4.3 standard (no root, no unlocked bootloader, no custom recovery). I didn't like some of the UI changes in 4.3, and since I wanted to try custom ROMs out anyways, I figured now would be as good a time as any.
After doing hours of research, I was able to successfully get my phone rooted and TWRP installed (using the GooManager app). I had the AOKP d2vzw rom (milestone 1) downloaded and on my phone. I then tried to use GooManager to install the ROM. The phone rebooted into download mode, then gave an error message. I think I didn't properly unlock the bootloader.
After that, the phone wouldn't boot to a ROM at all. I've been trying to install stock ROMs using ODIN and was able to get the stock recovery back, but now all I can get to is the stock recovery and the Download Mode. Whenever the phone boots normally, I get the message, "System software not authorized by Verizon Wireless has been found on your phone . . ."
The biggest issue I've had is that it seem like nothing will install properly using ODIN. When trying to flash TWRP, it fails after NAND Write Start!!. When trying to flash a bootloader, it'll give a write/fail after aboot.
At this point, I'll be happy just getting it back to a working ROM. Any help would be appreciated.
WhiteRabbit44 said:
First off, I have a Verizon GS3 (SCH-I535). As of this morning, it was running the new 4.3 standard (no root, no unlocked bootloader, no custom recovery). I didn't like some of the UI changes in 4.3, and since I wanted to try custom ROMs out anyways, I figured now would be as good a time as any.
After doing hours of research, I was able to successfully get my phone rooted and TWRP installed (using the GooManager app). I had the AOKP d2vzw rom (milestone 1) downloaded and on my phone. I then tried to use GooManager to install the ROM. The phone rebooted into download mode, then gave an error message. I think I didn't properly unlock the bootloader.
After that, the phone wouldn't boot to a ROM at all. I've been trying to install stock ROMs using ODIN and was able to get the stock recovery back, but now all I can get to is the stock recovery and the Download Mode. Whenever the phone boots normally, I get the message, "System software not authorized by Verizon Wireless has been found on your phone . . ."
The biggest issue I've had is that it seem like nothing will install properly using ODIN. When trying to flash TWRP, it fails after NAND Write Start!!. When trying to flash a bootloader, it'll give a write/fail after aboot.
At this point, I'll be happy just getting it back to a working ROM. Any help would be appreciated.
Click to expand...
Click to collapse
When you are on 4.3, you can't unlock your phone anymore. That means no AOSP roms, but you can still use custom touchwiz roms based on 4.3. You're softbricked and you have to use this thread to fix it.
http://forum.xda-developers.com/showthread.php?t=2586319
After that completes, you can use this to root.
http://forum.xda-developers.com/showthread.php?t=2565758
Once you're rooted, this is the only recovery you can install, don't flash any other recovery.
http://forum.xda-developers.com/showthread.php?t=2605648
Read up on all the threads, 4.3 is completely different then 4.1 was.
Sent from my SCH-I535 using Tapatalk 2
Extra Info:
With Odin, I have made sure Kies is uninstalled. I've also tried multiple USB cables, including the ones the phone came with, and I've tried almost every USB port on my computer. Whenever Odin fails, it's in the exact same spot every time, which makes me think it's a software issue, not a hardware issue.
EDIT:
I was actually able to get the stock.vzw-root66 ROM installed by Odin without any errors. The phone rebooted immediately, then showed the android robot with the blue spinny thing in his chest, then the phone went back to the same Verizon error message.
BadUsername said:
When you are on 4.3, you can't unlock your phone anymore. That means no AOSP roms, but you can still use custom touchwiz roms based on 4.3. You're softbricked and you have to use this thread to fix it.
http://forum.xda-developers.com/showthread.php?t=2586319
After that completes, you can use this to root.
http://forum.xda-developers.com/showthread.php?t=2565758
Once you're rooted, this is the only recovery you can install, don't flash any other recovery.
http://forum.xda-developers.com/showthread.php?t=2605648
Read up on all the threads, 4.3 is completely different then 4.1 was.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
This worked like a charm! Thank you. I admit I am fairly new at all of this and did a ton of research beforehand, but I apparently did not research the differences between 4.1 and 4.3. You saved my butt!
WhiteRabbit44 said:
This worked like a charm! Thank you. I admit I am fairly new at all of this and did a ton of research beforehand, but I apparently did not research the differences between 4.1 and 4.3. You saved my butt!
Click to expand...
Click to collapse
TW 4.3 discussion thread has most info consolidated in one place:
http://forum.xda-developers.com/showthread.php?t=2575661
Sent from my SCH-I535 using Tapatalk 4
Alright so I have a 2013 Moto G, and basically in the past while on KitKat I've rooted my phone, given it custom recovery (TWRP), and messed around with the ROM (changed it to CM, PA and a few others and back). Now I've come to update to Lollipop and of course I need stock recovery to update my phone via OTA, and when it first prompted me to update, I had TWRP and I didn't really think, I just updated, this sent my phone into a bootloop, rebooting straight into TWRP every time I turned my phone on. Luckily I had a backup and I just restored to that and that fixed it. Recently I've been trying to fix the correct stock recovery for my phone so I can update, and I found some MotoTool AIO thing, and that changed my recovery back to KitKat stock (or so it says), now when I go into recovery it LOOKS like stock, can do everything you could normally do with stock recovery, but when I came to update it, about a quarter of the way though the update process, it errors and reboots my phone. Luckily this time my phone recognizes it has errored and just cancels the update instead of sending me into a boorloop. Any help would be greatly appreciated.
Thank you,
Tom.
tomisalunatic said:
Alright so I have a 2013 Moto G, and basically in the past while on KitKat I've rooted my phone, given it custom recovery (TWRP), and messed around with the ROM (changed it to CM, PA and a few others and back). Now I've come to update to Lollipop and of course I need stock recovery to update my phone via OTA, and when it first prompted me to update, I had TWRP and I didn't really think, I just updated, this sent my phone into a bootloop, rebooting straight into TWRP every time I turned my phone on. Luckily I had a backup and I just restored to that and that fixed it. Recently I've been trying to fix the correct stock recovery for my phone so I can update, and I found some MotoTool AIO thing, and that changed my recovery back to KitKat stock (or so it says), now when I go into recovery it LOOKS like stock, can do everything you could normally do with stock recovery, but when I came to update it, about a quarter of the way though the update process, it errors and reboots my phone. Luckily this time my phone recognizes it has errored and just cancels the update instead of sending me into a boorloop. Any help would be greatly appreciated.
Thank you,
Tom.
Click to expand...
Click to collapse
Try putting twrp back on and flashing stock Lollipop Rom. http://forum.xda-developers.com/moto-g/development/rom-stock-motorola-lollipop-rom-t3017510 You can also try aosp, cm12.1 or any other lollipop ROM.
The Lollipop OTA is very picky, I believe any modifications to the stock firmware will cause the update to fail. You will need to have a completely stock system for the OTA to install successfully. Find the correct KitKat firmware for your phone and flash it then try upgrading.
Hi.
I'm having a similar problem with te OTA being picky (topic here).
Is there a stock firmware "file map" so that we can check manually what is wrong and erase/add needed files ?
Maybe this could be done by checking a flashable stock rom ?
Thanks a lot guys.
EDIT : Found a solution here http://forum.xda-developers.com/mot...osing-apps-t2979971/post57658072#post57658072.
Worked perfectly !
OP, I am in the same situation. I did the same as you, and got the same results. Have you managed to solve it? It would be nice if you tell what you decide to do and what's the outcome. Thanks!
tomisalunatic said:
Alright so I have a 2013 Moto G, and basically in the past while on KitKat I've rooted my phone, given it custom recovery (TWRP), and messed around with the ROM (changed it to CM, PA and a few others and back). Now I've come to update to Lollipop and of course I need stock recovery to update my phone via OTA, and when it first prompted me to update, I had TWRP and I didn't really think, I just updated, this sent my phone into a bootloop, rebooting straight into TWRP every time I turned my phone on. Luckily I had a backup and I just restored to that and that fixed it. Recently I've been trying to fix the correct stock recovery for my phone so I can update, and I found some MotoTool AIO thing, and that changed my recovery back to KitKat stock (or so it says), now when I go into recovery it LOOKS like stock, can do everything you could normally do with stock recovery, but when I came to update it, about a quarter of the way though the update process, it errors and reboots my phone. Luckily this time my phone recognizes it has errored and just cancels the update instead of sending me into a boorloop. Any help would be greatly appreciated.
Thank you,
Tom.
Click to expand...
Click to collapse
Update to 5.1 success..... erm, well it's all relative
Eventually managed to update my XT1039 to 5.1 via ota.
Started with a fully charged phone and flashed 4.4.4 stock firmware (http://forum.xda-developers.com/moto-g/4g-development/xt1039-moto-g-4g-stock-firmware-kxb21-t2805619).
Once completed, powered up phone and signed into google play then updated the motorola update services app.
DO NOT install a custom recovery or root yet or the update will fail!
Start the update by going into settings/about phone/system updates.
After first boot into 5.1, do a factory reset.
To root once the upgrade is completed, download cf autoroot (http://forum.xda-developers.com/moto-g/4g-development/root-xt1039-cf-auto-root-peregrine-t2942406) and unzip to a folder on your pc. Open a command prompt and change directory to this folder. Powerup handset in bootloader mode (hold vol down while switching on), connect USB and run 'root-windows.bat' from the command prompt.
So far I'm hugely disappointed in the update as I use WiFi tethering alot and it appears to be a massive fail. I know it wasn't 100% in 4.4.4 or CM12 5.1 with both reqiuring an occasional reboot, but in 5.1, something's just not right and it's basically unusable (could it be updated radio or something?). Fortunately, USB tethering appears flawless.
Another obsrvation seems to be abscence of a + appearing in the HSPA signal indicator, I seem to be getting just the H appearing regardless.
Also no more bluetooth visibilty timeout setting.
After installing CWM 6.0.5.0, I got gliches with the display in recovery mode but it works.
Now after I have it rooted, ad free and de-bloated, fixed the power on logo and installed CWM 6.0.5.0, I'll stick with it for a while to just to see how the battery lasts.
In hindsight I should've stuck with CM12 5.1.
im in need of help deodexing. i used the universal deodexer and didnt get proper start up. it became stuck on verizon logo. i reflashed the firmware so its like new again. question is how to properly deodex the stock rom so i can theme status icons? maybe some zip file that i can use in safestrap to make things easier. oh im using verizon prepaid galaxy s3 which is i535PP. any help is appreciated
bjf189 said:
im in need of help deodexing. i used the universal deodexer and didnt get proper start up. it became stuck on verizon logo. i reflashed the firmware so its like new again. question is how to properly deodex the stock rom so i can theme status icons? maybe some zip file that i can use in safestrap to make things easier. oh im using verizon prepaid galaxy s3 which is i535PP. any help is appreciated
Click to expand...
Click to collapse
If root can even be obtained this might be an option, otherwise your probably out of luck
Sent from my Nexus 5
Root has been obtained @ShapesBlue
Nobody has created a ROM for i535PP users yet(the i535 roms run but no wifi/data). And you're correct about having to use safestrap to flash it.If you're comfortable with a bash terminal you can try using one of the various tools found around here to modify the stock rom. If you're not then I'll see what I can do this weekend and try to get something for us i535pp users (after a day or so of testing)
ShapesBlue said:
If root can even be obtained this might be an option, otherwise your probably out of luck
Sent from my Nexus 5
Click to expand...
Click to collapse
Ok, there wasn't really a need to mention me in this thread. Everytime someone does that I get an email. And just because root has been obtained doesn't mean you can flash roms via safestrap
Sent from my Nexus 5
ShapesBlue said:
Ok, there wasn't really a need to mention me in this thread. Everytime someone does that I get an email. And just because root has been obtained doesn't mean you can flash roms via safestrap
Sent from my Nexus 5
Click to expand...
Click to collapse
Flashing via safestrap appears to work fine on my i535pp. The only issue I ran into was wifi not working with roms meant for the i535. And sorry for you having to receive an email for that.
OpenSourcererSweg said:
Flashing via safestrap appears to work fine on my i535pp. The only issue I ran into was wifi not working with roms meant for the i535. And sorry for you having to receive an email for that.
Click to expand...
Click to collapse
Its cool. Good to see safestrap works on the prepaid version also
Sent from my Nexus 5
I'm not sure what a bash terminal is unless it's the same thing as the terminal emulator. I tried using that rom that's called paulpizz or something like that. I used some other rom to. The paulpizz one always failed to install even after downloading it a third time. The other one i can't remember the name but it installed but wouldn't start at all. It would just go black and bootloop and goes into stock recovery for some reason. I came across the nf5 module when i found that paulpizz rom on the goo server they hosted it on. So i got the module and i figured if i were to flash the module over the i535 rom that it would fix the wifi an data problem but never got an answer because it always failed to start up properly and would just bootloop into stock recovery. Ugh Verizon is making things so difficult with modding lol. As of now I'm just using xposed to get at least some theming in and tweaks. I couldn't get any deodex program to work. Whenever i used the deodex files and pushed them to the system of apps and framework, it would restart and just stick on the Verizon logo. So i had to flash the firmware to fix the problem.
When i was on 4.3 with this phone safestrap worked and i got the wifi and data sim error. Now that i got it replaced I'm running the kernel of July 22 2014. Everyone was saying I'm out of luck but i came across kingroot and got the most recent version and it worked. I have root. Installed safestrap for 4.4 and it runs fine but can't get any custom roms to boot. I only managed to find one 4.4 touchwiz rom unfortunately
OpenSourcererSweg said:
Root has been obtained @ShapesBlue
Nobody has created a ROM for i535PP users yet(the i535 roms run but no wifi/data). And you're correct about having to use safestrap to flash it.If you're comfortable with a bash terminal you can try using one of the various tools found around here to modify the stock rom. If you're not then I'll see what I can do this weekend and try to get something for us i535pp users (after a day or so of testing)
Click to expand...
Click to collapse
OpenSourcererSweg said:
Flashing via safestrap appears to work fine on my i535pp. The only issue I ran into was wifi not working with roms meant for the i535. And sorry for you having to receive an email for that.
Click to expand...
Click to collapse
Can you tell me what rom you have successfully flashed with safestrap? I would like to test something
bjf189 said:
Can you tell me what rom you have successfully flashed with safestrap? I would like to test something
Click to expand...
Click to collapse
http://forum.xda-developers.com/gal...iterom-v1-0-i535vrudne1-t2805797/post53919312
If you're going to try flashing an i535 rom and then the i535pp modules let me know how that goes, can't test as I won't be able to do anything till the weekend. If that's the case then there's no need for roms for the pre paid version. Cyanogenmod was also bootable but very buggy.
OpenSourcererSweg said:
http://forum.xda-developers.com/gal...iterom-v1-0-i535vrudne1-t2805797/post53919312
If you're going to try flashing an i535 rom and then the i535pp modules let me know how that goes, can't test as I won't be able to do anything till the weekend. If that's the case then there's no need for roms for the pre paid version. Cyanogenmod was also bootable but very buggy.
Click to expand...
Click to collapse
I'll let you know how it goes and thank you. How is it that you were able to boot CM? From my understanding being that the bootloader is locked and has Knox for extra security to make the unlocking like impossible. But a genius came up with safestrap so we are able to use some custom roms but the down side is that it has to be the same Android OS and has to be a touchwiz based rom. So how are you getting lucky with all this? I love CM and I'd pick CM over any custom rom any day but i gave up an lost hope of ever getting CM because of the locked bootloader
bjf189 said:
I'll let you know how it goes and thank you. How is it that you were able to boot CM? From my understanding being that the bootloader is locked and has Knox for extra security to make the unlocking like impossible. But a genius came up with safestrap so we are able to use some custom roms but the down side is that it has to be the same Android OS and has to be a touchwiz based rom. So how are you getting lucky with all this? I love CM and I'd pick CM over any custom rom any day but i gave up an lost hope of ever getting CM because of the locked bootloader
Click to expand...
Click to collapse
Safestrap 3.75 had support for AOSP roms (wifi/data didn't work for them either) and 4.0 dropped support for that (there is currently no point). Read the thread for more info http://forum.xda-developers.com/showthread.php?t=2797314
Ok i wasn't using safestrap 4.0. I had 3.75 B05 which i thought was the latest version they had. I'm updated to 4.0 now and about to test the modules on the superlite rom
Update: i have tried the super lite rom using safestrap. The boot animation won't work during start up. When it gets to the welcome screen it freezes. It still does it even without applying the nf5 module. It freezes and will keep popping up that system isn't responding. System just keeps freezing and prompting me to wait or force close. So not sure why my s3 has a problem running it but yours don't
bjf189 said:
Update: i have tried the super lite rom using safestrap. The boot animation won't work during start up. When it gets to the welcome screen it freezes. It still does it even without applying the nf5 module. It freezes and will keep popping up that system isn't responding. System just keeps freezing and prompting me to wait or force close. So not sure why my s3 has a problem running it but yours don't
Click to expand...
Click to collapse
Did you wipe cache/data after installing? Other than that I can't think of anything that would cause that
OpenSourcererSweg said:
Did you wipe cache/data after installing? Other than that I can't think of anything that would cause that
Click to expand...
Click to collapse
Well no. The instructions just said to do a full wipe off everything then install and reboot so extra what i did. What version you running of the rom?
bjf189 said:
Well no. The instructions just said to do a full wipe off everything then install and reboot so extra what i did. What version you running of the rom?
Click to expand...
Click to collapse
I'm running the stock prepaid rom, not superlightrom, sorry if there's any confusion there.
When I tried out superlightrom (quite some time ago) it appeared to work fine (excluding wifi/data and nagging about no SIM card being inserted, nothing like what you're describing) and I went back to stock.
Oh ok. Well it seems that the prepaid version or the s3 in general is dead. That's unfortunate