P3113 Update - Galaxy Tab 2 Q&A, Help & Troubleshooting

I've noticed there was an update on kies this week (P3113UEBLH1), I'm not sure what it was thought.
I've tried upgrading in kies, it was stuck at 0% downloading then connection timed out.
The OTA update didn't find any updates available.
Then next morning, kies said no update available too.
So, Anyone got the update to work, and if so what changes did you notice?
The update is available for flashing with odin on samsung-updates.com , this is the 2nd 4.0.4 update. (I'm still running the old 4.0.4 (P3113UEBLG5))

I don't have it, but I can look into it...
Bibicp said:
I've noticed there was an update on kies this week (P3113UEBLH1), I'm not sure what it was thought.
I've tried upgrading in kies, it was stuck at 0% downloading then connection timed out.
The OTA update didn't find any updates available.
Then next morning, kies said no update available too.
So, Anyone got the update to work, and if so what changes did you notice?
The update is available for flashing with odin on samsung-updates.com , this is the 2nd 4.0.4 update. (I'm still running the old 4.0.4 (P3113UEBLG5))
Click to expand...
Click to collapse
My device is rooted, and the only backup I made with CWM was after I rooted, if I go to update (if my device can find it) will I:
1) Brick out and be screwed?
2) Have to flash my backup (which is rooted, so would that mean I can't update again?)
3) Be ok and keep my rooting?
4) Be ok, and lose my rooting, and have to re-root?
I realize I am kind of answering your question with a question, but I would be happy to see if I can track it down and see what changes there are, if it's safe to install.

FlynnErik said:
My device is rooted, and the only backup I made with CWM was after I rooted, if I go to update (if my device can find it) will I:
1) Brick out and be screwed?
2) Have to flash my backup (which is rooted, so would that mean I can't update again?)
3) Be ok and keep my rooting?
4) Be ok, and lose my rooting, and have to re-root?
I realize I am kind of answering your question with a question, but I would be happy to see if I can track it down and see what changes there are, if it's safe to install.
Click to expand...
Click to collapse
Try backing up your system using clockworkmod recovery first, then go to download mode, flash your firmware version (download from samfirmware or samsung-updates) and flash it with odin.
This way you're unrooted, running stock rom and stock recovery and then you can install the update.
I didn't try to install an update while rooted, but it's not recommended so don't try.

I did a back up after I rooted with CWM
Bibicp said:
Try backing up your system using clockworkmod recovery first, then go to download mode, flash your firmware version (download from samfirmware or samsung-updates) and flash it with odin.
This way you're unrooted, running stock rom and stock recovery and then you can install the update.
I didn't try to install an update while rooted, but it's not recommended so don't try.
Click to expand...
Click to collapse
So is my backup going to be rooted? Or will it be the stock? I am currently rooted stock 4.0.4.
Btw, I have found no information about the update anywhere on the net. Maybe they accidently did a push to us, and pulled it back?
Should I wipe cache, dalvik and FDR before I flash the firmware from those sites or use the backup I made already? (which I am unsure if I should even use since idk if it will be rooted or not lol)
I wasn't going to update till it was time to get JB, but this update that vanished is intriguing enough I might lol

As i know yes when you restore backup with cwm the result will be rooted also as the cwm takes image of the system when doing backup and as you when doing backup was rooted so when restore this backup you will be still rooted if you flash via odin no need to wipe cash and dalvik cash i never read anyone doing this
Even if you do this wipe no harm at all
Sent from my GT-I9100 using xda app-developers app

As mohamed selim said, but wipe your data and do a factory reset in clockworkmod (after backup)
and why will samsung pull back the update?

There's several reasons why this may happen
Bibicp said:
As mohamed selim said, but wipe your data and do a factory reset in clockworkmod (after backup)
and why will samsung pull back the update?
Click to expand...
Click to collapse
They pushed it out to the wrong devices
They pushed it out to early
They found a last minute bug and had to pull back
They are testing it, and not everyone should have gotten the option to get it.
Ok so to get things straight. If/when we go to JB I will need to download a firmware stock from one of the sites listed above, download it.
Do a backup (just to be safe of what I have now)
FDR/Wipe everything
Install the firmware using Odin
If everything looks good, re-flash CWM
Do another backup so I have a clean stock to revert back to down the road if needed.
That sum it up correctly? This way I can bookmark this thread so I don't forget lol.
**EDIT** When I use Odin to restore stock will I lose CWM? If so, what happens if something goes wrong in the Odin restore and I have a boot loop, or etc, what would be my next move since I won't have CWM to restore previous, would I be able to install it like I would if things were going ok?
Sorry for sounding like a n00b, I am still learning all about this, but I think I am getting closer to learning enough to not be a n00b lol. I only have 10 tabs open with this forum instead of 20!

FlynnErik said:
They pushed it out to the wrong devices
They pushed it out to early
They found a last minute bug and had to pull back
They are testing it, and not everyone should have gotten the option to get it.
Ok so to get things straight. If/when we go to JB I will need to download a firmware stock from one of the sites listed above, download it.
Do a backup (just to be safe of what I have now)
FDR/Wipe everything
Install the firmware using Odin
If everything looks good, re-flash CWM
Do another backup so I have a clean stock to revert back to down the road if needed.
That sum it up correctly? This way I can bookmark this thread so I don't forget lol.
**EDIT** When I use Odin to restore stock will I lose CWM? If so, what happens if something goes wrong in the Odin restore and I have a boot loop, or etc, what would be my next move since I won't have CWM to restore previous, would I be able to install it like I would if things were going ok?
Sorry for sounding like a n00b, I am still learning all about this, but I think I am getting closer to learning enough to not be a n00b lol. I only have 10 tabs open with this forum instead of 20!
Click to expand...
Click to collapse
It's not for the wrong device since it's saying P3113, and it's not jelly bean. as I've seen on samsung firmware.com it's 4.0.4.
Well, on my homescreen I put a shortcut for the software update, it still has a circle saying 'N" on it (which probably stands for new), but going in kies I don't find it, It only says it downloaded it but the firmware is up to date.
So probably either they really pulled it back, or it's a bug and they're fixing it. (I really can't wait for jelly bean)
Second, yes it will erase the CWM recovery and go back to stock recovery.
The common mistake people make to get a bootlop is not wiping data/doing a factory reset before flashing a new ROM, so you should go to recovery and do a factory reset, then go to download mode and flash the firmware with odin. If you ever get stuck in a bootloop, try pressing volume down + power key to get to download mode and re flash the ROM. if it's still stuck, try re-downloading the ROM files you downloaded, it could be corrupted.

Awesome!
Bibicp said:
It's not for the wrong device since it's saying P3113, and it's not jelly bean. as I've seen on samsung firmware.com it's 4.0.4.
Well, on my homescreen I put a shortcut for the software update, it still has a circle saying 'N" on it (which probably stands for new), but going in kies I don't find it, It only says it downloaded it but the firmware is up to date.
So probably either they really pulled it back, or it's a bug and they're fixing it. (I really can't wait for jelly bean)
Second, yes it will erase the CWM recovery and go back to stock recovery.
The common mistake people make to get a bootlop is not wiping data/doing a factory reset before flashing a new ROM, so you should go to recovery and do a factory reset, then go to download mode and flash the firmware with odin. If you ever get stuck in a bootloop, try pressing volume down + power key to get to download mode and re flash the ROM. if it's still stuck, try re-downloading the ROM files you downloaded, it could be corrupted.
Click to expand...
Click to collapse
So the one on the site even though its XAR is us? Can I ask why we have that tag? Not something like US or etc? I mean I don't care, just kinda curious since that would make it more simple to know which region gets what, at least for me it would lol.
Thank you so much for the help and the knowledge, I figured I would end up with stock recovery, which is why I wanted to make sure about what if something goes wrong.
As a side thought, where does the backup that CWM makes located? Can I copy and paste that on to my PC so I always have a back up handy? (I would sync it into the cloud). Can I flash that with odin down the road? Or is that only a CWM usable file?

Any more info on the firmware release?....Trying to download it now!
Firmware Version: P3113UEBLH1
OS: Ice Cream Sandwich
OS Version: v4.0.4
Release Date: 08-10-2012
Build Date: 08-10-2012
Changelist: 999349

Gizmo said:
Any more info on the firmware release?....Trying to download it now!
Firmware Version: P3113UEBLH1
OS: Ice Cream Sandwich
OS Version: v4.0.4
Release Date: 08-10-2012
Build Date: 08-10-2012
Changelist: 999349
Click to expand...
Click to collapse
That's all I know about it, where are you downloading it? samsung updates.com? or kies/OTA update?

Bibicp said:
That's all I know about it, where are you downloading it? samsung updates.com? or kies/OTA update?
Click to expand...
Click to collapse
I found it on some foreign site....samsung-updates.com won't let you download the P3113UEBLH1 firmware, Just the Kernel, I don't use Kies! Uploading it right now!

Gizmo said:
I found it on some foreign site....samsung-updates.com won't let you download the P3113UEBLH1 firmware, Just the Kernel, I don't use Kies! Uploading it right now!
Click to expand...
Click to collapse
Alright, tell me if you notice anything different.

Nice
good!

Im downloading it now. Ill post it when its rooted and deodexed

Bibicp said:
I've noticed there was an update on kies this week (P3113UEBLH1), I'm not sure what it was thought.
I've tried upgrading in kies, it was stuck at 0% downloading then connection timed out.
The OTA update didn't find any updates available.
Then next morning, kies said no update available too.
So, Anyone got the update to work, and if so what changes did you notice?
The update is available for flashing with odin on samsung-updates.com , this is the 2nd 4.0.4 update. (I'm still running the old 4.0.4 (P3113UEBLG5))
Click to expand...
Click to collapse
I tried updating it once with KIES and it got to a point and froze on the screen. I had to force the tablet to shut down and rebooted and the tablet was OK. Being a glutton for punishment I tried again with KIES and the LH1 update successfully updated my GT2 7 and the About screen confirms it. Directly after installing and rebooting I started getting error messages about Chrome crashing. I uninstalled Chrome browser and reinstalled it and all is well. No other problems. Do NOT really notice ANY difference at all.
The only problem I have is that NOW I have decided that I would like to root my GT2 7 and I am NOT sure the methods I see out there will work with the P3113UEBLH1 update.
Does anyone know if my GT2 7 - P3113UEBLH1 can be rooted safely??
grobin

I dont think IT is better than CM9

RomsWell said:
Im downloading it now. Ill post it when its rooted and deodexed
Click to expand...
Click to collapse
Can you please tell me what's different than the older UEBLG5 version? and btw can you upload the stock rom itself without root so I can test it? because I couldn't download :s
EDIT: I downloaded it via samsung-updates.com and flashed it with odin.
It's pretty much the same as UEBLG5 I didn't notice anything different, but I downgraded to UEBLG5 as samsung appears to have pushed back this update (UEBLH1), because when I connect the device to kies, it doesn't recognize it.

Bibicp said:
Can you please tell me what's different than the older UEBLG5 version? and btw can you upload the stock rom itself without root so I can test it? because I couldn't download :s
EDIT: I downloaded it via samsung-updates.com and flashed it with odin.
It's pretty much the same as UEBLG5 I didn't notice anything different, but I downgraded to UEBLG5 as samsung appears to have pushed back this update (UEBLH1), because when I connect the device to kies, it doesn't recognize it.
Click to expand...
Click to collapse
I think it broke wifi. Not sure what the change log says about it. If the Cam is fixed i think im just going to add it to the G5 update. And not bother posting this untill its confrimed OTA

RomsWell said:
I think it broke wifi. Not sure what the change log says about it. If the Cam is fixed i think im just going to add it to the G5 update. And not bother posting this untill its confrimed OTA
Click to expand...
Click to collapse
Sorry for the question, but what do you mean comfirmed OTA? Once kies told me about the UEBLG5 update, I couldn't install it with kies as it was lagging.
Next day I found it on the OTA update.
This one showed on kies for a day, then next day neither kies or the OTA udpates showed there was an update so it probably got pulled back?

Related

[Q] "bricked" phone help?

I have a Galaxy S 4G Rooted and Unlocked. I tried to install a special lock screen tweak, and all of the sudden upon booting, the Android System imemdiately force closes. The screen stays totally black after the T-Mobile splash screen and Galaxy S logo come up.
I've erased all my data, but what i really need to do is flash the phone (i think...)
What should i do?
Thanks.
danstheman7 said:
I have a Galaxy S 4G Rooted and Unlocked. I tried to install a special lock screen tweak, and all of the sudden upon booting, the Android System imemdiately force closes. The screen stays totally black after the T-Mobile splash screen and Galaxy S logo come up.
I've erased all my data, but what i really need to do is flash the phone (i think...)
What should i do?
Thanks.
Click to expand...
Click to collapse
If your phone appears to be bricked what you may have to do is flash your phone with one of the three or four Stock Roms that can be found on the DEV site. Check here to see how to use ODEN. For flashing Roms ODEN is the process that is being used on the SGS4G until CWM is working. There may be another way to fix your issue, but if you can get into download mode ODEN should work to get you back to working order. Just make sure you don’t check Partition when using ODEN.
danstheman7 said:
What should i do?
Thanks.
Click to expand...
Click to collapse
You are in luck!!! Check Here http://forum.xda-developers.com/showthread.php?t=1061093
Samsung just released an update using Kies Mini. It's just bug fixes, but it addresses your blank screen. Kies Mini Updates your system Over The Air (OTA). read up on it before you do it. It can be done with the data connection from your phone, but you may want to have a WiFi backup to download the ROM. You don't want it to get interupted during the download process.
nwpro3 said:
You are in luck!!! Check Here http://forum.xda-developers.com/showthread.php?t=1061093
Samsung just released an update using Kies Mini. It's just bug fixes, but it addresses your blank screen. Kies Mini Updates your system Over The Air (OTA). read up on it before you do it. It can be done with the data connection from your phone, but you may want to have a WiFi backup to download the ROM. You don't want it to get interupted during the download process.
Click to expand...
Click to collapse
I ended up using ODEN like you said, and installed 2.2.1 FROYO KC1.
Phone works fine now, thank you
Oh, and I tried clicking "Software Update" and it says "No Firmware"....
Maybe because i'm unlocked on AT&T?
danstheman7 said:
I ended up using ODEN like you said, and installed 2.2.1 FROYO KC1.
Phone works fine now, thank you
Oh, and I tried clicking "Software Update" and it says "No Firmware"....
Maybe because i'm unlocked on AT&T?
Click to expand...
Click to collapse
I don't think Kies recognizes the KC1 firmware since it was never an official release. Hopefully someone will get a firmware dump so that Whitehawk can give us a Deodexed version soon.
danstheman7 said:
I ended up using ODEN like you said, and installed 2.2.1 FROYO KC1.
Phone works fine now, thank you
Oh, and I tried clicking "Software Update" and it says "No Firmware"....
Maybe because i'm unlocked on AT&T?
Click to expand...
Click to collapse
Good to hear you got your phone back up and working. Whether you use KC1 or the new KD1 that was just released won’t make all that much difference. When you clicked on Update Software it is looking for the Over The Air Update firmware. That update is selectively distributed to phones from TMO as the bandwidth allows. Your phone hasn’t received the OTA update yet. That is why you got the No Firmware message. The other way you can download the KD1 firmware is by using Keis Mini software from Samsung. I did that update last night and now have the KD1 Firmware. If you are on AT&T you would have to get the OTA update from them if you are on that network. That is if they decide to send it out.
Ah, great.
Well either way I removed the bloatware apps on my phone with TitaniumBackup, so no OTA for me anyway, correct?
danstheman7 said:
Ah, great.
Well either way I removed the bloatware apps on my phone with TitaniumBackup, so no OTA for me anyway, correct?
Click to expand...
Click to collapse
Tmo is in the process of scheduling OTA updates. If you are on ATT, the update will have to come from them if they are sending them out. You can also use the Kies Mini application to get the KD1 update from Samsung Here Check the OP. There is also a Deodexed version On the Dev page. http://forum.xda-developers.com/showthread.php?t=1063696. Note: The Deodexed version needs to be flashed using ODEN or Heimdall.
Yeah just follow the steps in this guide http://forum.xda-developers.com/showthread.php?t=1001759
to flash the deodexed rom in the post above me.

[Q] GT P3113 4.0.4 update

To update from kies, do i need to be unrooted (running stock rooted)... If so, how do you unroot GT 3113??
kan_bleach said:
To update from kies, do i need to be unrooted (running stock rooted)...
Click to expand...
Click to collapse
Nope, you don't have to do anything. Just connect your tab via usb cable and run Kies. If a FW update is available you will be notified as soon as the Kies start...
JIMBOAthens said:
Nope, you don't have to do anything. Just connect your tab via usb cable and run Kies. If a FW update is available you will be notified as soon as the Kies start...
Click to expand...
Click to collapse
I am doing that but kies keeps on disconnecting....though this is the issue with most of the people right now..
kan_bleach said:
I am doing that but kies keeps on disconnecting....though this is the issue with most of the people right now..
Click to expand...
Click to collapse
bro no matter rooted or unrooted when connected to kies it will show update if available.and disconnection problem is with most of tab 2 user.so there are two ways wait for fota or go to service center and get tab updated.
I've tried to update my rooted P3113 from wifi download, not by KIES.
No success! It must be because of the CWM recovery installed, since the tab automatically boots to recovery after downloading updates from samsung. I think the samsung official update scenario stucks at this point (because there is no standart android recovery after CWM installed).
When i'm trying to update rooted P3113 from KIES - no success too, because of "disconnection" problem.
So, we waiting for the stock 4.0.4 rom file for CWM recovery.
Root or unrooted doesn't matter. My tablet is stock and never rooted and Kies was still messing up. Luckily I finally got the OTA this morning.
When I checked for update from my device. It says no update is available. How to get the update?
Sent from my GT-P3113 using xda app-developers app
I have a Galaxy Tab 2 7.0 that was rooted and the other day when I turned it on it started updating my tablet. However, the update failed. Probably because I was rooted. So I unrooted the tablet and every time I check for updates it says there are NO updates. I installed Kies on Windows and (after connecting to it with the GTab2 7) it shows me that there IS an update for it. However, every time I click on update it disconnects after a few seconds and and goes back to the initial screen saying there is an update.
So, I can't install it via Kies. And now I when I check for updates it says there are NO updates. Am I totally screwed OR what.
When the update failed, I think when it rebooted to install it THAT it came up to CWM and that is why it failed BUT now CWM is gone and I am definitely NOT rooted with stock ROM on the machine.
However, I see in the settings under STATUS that is shows "modified" instead of "normal".
Is there any way to reset the status? Or is it necessary?
---grobin
grobin said:
I have a Galaxy Tab 2 7.0 that was rooted and the other day when I turned it on it started updating my tablet. However, the update failed. Probably because I was rooted. So I unrooted the tablet and every time I check for updates it says there are NO updates. I installed Kies on Windows and (after connecting to it with the GTab2 7) it shows me that there IS an update for it. However, every time I click on update it disconnects after a few seconds and and goes back to the initial screen saying there is an update.
So, I can't install it via Kies. And now I when I check for updates it says there are NO updates. Am I totally screwed OR what.
When the update failed, I think when it rebooted to install it THAT it came up to CWM and that is why it failed BUT now CWM is gone and I am definitely NOT rooted with stock ROM on the machine.
However, I see in the settings under STATUS that is shows "modified" instead of "normal".
Is there any way to reset the status? Or is it necessary?
---grobin
Click to expand...
Click to collapse
Dude how did you unroot???
kan_bleach said:
Dude how did you unroot???
Click to expand...
Click to collapse
You don't need to unroot, just flash 4.0.4 firmware with odin as i described in this topic
Download firmware from http://samsung-updates.com/device/?id=GT-P3113
You will have unrooted stock firmware after flash complete. And after that you install cwm and root just as you did with 4.0.3
One way is to just flash it in Odin.
I used this: http://forum.xda-developers.com/showthread.php?t=1645295
This seems to be a pretty foolproof "restock" method.
The only UNROOT method that worked for me!
kan_bleach said:
Dude how did you unroot???
Click to expand...
Click to collapse
The only METHOD that UNROOTED my Galaxy Tab 2 7.0 P3113 was the instructions at this web site :
http://www.androidauthority.com/galaxy-tab-2-7-0-p3113-root-clockworkmod-recovery-96474/
It's a 2 step process. I tried several other places that had similar instructions BUT this one worked. You have to download several files and the recovery rom file has 2 different versions and you choose the one that is appropriate for your situation. I was NOT sure which was appropriate so I tried both and it finally worked.
And it DOES unroot it.
And later that night JUST after midnight I was AGAIN notified on my GT2 7 that I had an update. This time it downloaded the 200+ mb file and rebooted and came up and installed it perfectly!
And every thing is working well now and I am on 4.04. It is SO much smoother than 4.03. A real keeper until Jelly Bean comes available.
----grobin
Ha ha well I should have read this thread before I did a factory reset and installed kies on like 5 computers. Come on samsung.
barmalei7 said:
You don't need to unroot, just flash 4.0.4 firmware with odin as i described in this topic
Download firmware from http://samsung-updates.com/device/?id=GT-P3113
You will have unrooted stock firmware after flash complete. And after that you install cwm and root just as you did with 4.0.3
Click to expand...
Click to collapse
The samsung-updates.com link does not work.
Please give link to any working GT-P3113 firmware download please.

Sgh-t869 cwm?

Hey guys, I just got a T-Mobile SGH-T869 and it came with Honeycomb on it.
I've been able to root it (which was as dumb as flashing a ZIP on the stock recovery), and I've flashed the CWM 5 I found (here). However, I'm unable to flash CM10 from that, so I'm looking to figure out what's wrong or the missing step.
Any suggestions?
Just to follow up on my own issue, I figured it'd be a good idea to update my SGH-T869 to ICS, because HoneyComb is kinda terrible.
For this device, at least for now, the "official" ICS update isn't being made available over the air, only available via the Samsung Kies program.
Its totally free and you can get it for Mac or Windows here http://www.samsung.com/us/kies/
The procedure to update was seriously as dumb as "Install Kies, then plug in your device".
Kies should auto-detect and in the case of my SGH-T869, it immediately offered to update the firmware. However, Kies requires your battery to be charged up before it'll let you proceed, so initially it didn't allow me to flash (my battery was down to around 43%).
After updating this way, everything was back to stock and I had no root anymore.
I re-obtained root by downloading the two attached files. The attached CWM is a "temporary" touch-enabled version. Flashing it from the stock recovery boots you into CWM but after you reboot, its gone. I booted to that and then flashed the attached root.zip, which re-established root on my tablet.
So, sort of progress. Next step: figure out how to get CM10 on this bad boy, since the stock ICS kinda blows

[Q] Help! Rooted phone with Custom Mode, ROM Manager Bricked

Hey guys,
I just got my phone and it updated to 4.4 pretty much out of the box. I still wanted to root so I used a method I found on here (will find if necessary) which is supposed to not trip the KNOX by putting the phone into "Custom Mode." Everything went fine until I tried to use ROM Manager to install CM.
When I boot I get the message "System software not authorized by Verizon Wireless has been found on your phone. Please turn off your phone and go to the nearest Verizon Wireless store for help." I've tried reflashing using Odin, clearing the cache and factory resets, but I get the same error every time.
I'm currently downloading another stock ROM which might work, but I wanted to see if anyone else has had this problem?
Thank you!
mortified21 said:
Hey guys,
I just got my phone and it updated to 4.4 pretty much out of the box. I still wanted to root so I used a method I found on here (will find if necessary) which is supposed to not trip the KNOX by putting the phone into "Custom Mode." Everything went fine until I tried to use ROM Manager to install CM.
When I boot I get the message "System software not authorized by Verizon Wireless has been found on your phone. Please turn off your phone and go to the nearest Verizon Wireless store for help." I've tried reflashing using Odin, clearing the cache and factory resets, but I get the same error every time.
I'm currently downloading another stock ROM which might work, but I wanted to see if anyone else has had this problem?
Thank you!
Click to expand...
Click to collapse
You are permanently stuck on the TW 4.3 OTA because the bootloader is signed with special keys that prevents:
-installing a custom recovery
-flashing custom roms/kernels
-downgrading your software below 4.3
If you can boot into download mode, do this 4.3 soft brick method.
With TW 4.3 OTA, all you can do is root using a tool called: Saferoot.
If you have 4.3 stock firmware you can root and that's it, no custom recovery, no custom rom, kernel, nothing, and just a heads up there are like 10 threads where people don't read and have done what you have, you need to flash the Odin 4.3 image for you phone to work again, never take an ota, enjoy your locked down device now
Sent from my SCH-I535 using XDA Premium 4 mobile app
SlimSnoopOS said:
You are permanently stuck on the TW 4.3 OTA because the bootloader is signed with special keys that prevents:
-installing a custom recovery
-flashing custom roms/kernels
-downgrading your software below 4.3
If you can boot into download mode, do this 4.3 soft brick method.
With TW 4.3 OTA, all you can do is root using a tool called: Saferoot.
Click to expand...
Click to collapse
Worked perfectly! Thank you so much!
mortified21 said:
Worked perfectly! Thank you so much!
Click to expand...
Click to collapse
My pleasure but all the thanks is owed to ThePagel, make sure to post your success in his thread. The more people that report their success with that method, then the less fear someone else may have in using that should they suffer the same experiences. :victory::good::good:
If you need any updates on the state of TW 4.3 then keep this discussion thread bookmarked.
I did the same thing today. The 4.3 update installed by itself!!! So i rooted it using Saferoot,
i installed rom manager, clicked the Install rom from sd card and i got that message. it will repeat that message and it wont boot. So i went into Odin mode and hit the volume down button to restart it. And after that it booted normally.
So basically i am stuck with 4.3? and is there 4.4 out for our phones yet?
also forgot to mention, it says my OS is custom when i first realized it updated.
AURMEND said:
I did the same thing today. The 4.3 update installed by itself!!! So i rooted it using Saferoot,
i installed rom manager, clicked the Install rom from sd card and i got that message. it will repeat that message and it wont boot. So i went into Odin mode and hit the volume down button to restart it. And after that it booted normally.
So basically i am stuck with 4.3? and is there 4.4 out for our phones yet?
also forgot to mention, it says my OS is custom when i first realized it updated.
Click to expand...
Click to collapse
Once you successfully updated with 4.3, you stuck with 4.3, there is no going back or flash anything and 4.3 is the latest factory rom for now. There's no 4.4 yet for our phone. There is custom 4.4 but only for people who didn't take the 4.3 update. Since they still have unlocked bootloader so they could load any custom rom.
buhohitr said:
Once you successfully updated with 4.3, you stuck with 4.3, there is no going back or flash anything and 4.3 is the latest factory rom for now. There's no 4.4 yet for our phone. There is custom 4.4 but only for people who didn't take the 4.3 update. Since they still have unlocked bootloader so they could load any custom rom.
Click to expand...
Click to collapse
Dang this sucks. I have no idea how it installed automatically then. I was listening to music the whole time. And I was trying to get a custom 4.4 after the update...
AURMEND said:
Dang this sucks. I have no idea how it installed automatically then. I was listening to music the whole time. And I was trying to get a custom 4.4 after the update...
Click to expand...
Click to collapse
Yep! sucks big time!!

[ROM] Tab 3 7.0 SM-T210/R Stock 4.4.2 KitKat Update

This is the stock US KitKat ROM for The Galaxy Tab 3 7" Tablet. Finally found it after a bunch of hassle online, and figured I'd post it here to make things easier for everyone.
When I Odin'd this ROM, it actually upgraded my tablet, and left all my items installed (not guaranteeing this will work the same for everyone else).
Afterwards, I just Odin'd TWRP to reroot using Chainfire's SuperSU (no other Superuser would work) and called it good.
Caution: if you are using a custom ROM, this may not work without reflashing stock 4.1.2 since the 4.4.2 ROM appears to be an update, rather than a full ROM.
Rooted devices and custom kernels that are otherwise stock should be fine.
The cache, and if possible dalvik-cache should be cleared before flashing. Some of those files can sometimes interfere with upgrades.
It might be necessary to pinpoint apps that are force closing, uninstall and reinstall them. Some apps, particularly paid apps, store their data differently on KitKat, and will automatically fail as a result.
If that fails, it might be necessary to factory reset the device.
The Stock 4.1.2 ROM for the T210R is available here: http://forum.xda-developers.com/gal...-stock-sm-t210r-4-1-2-jellybean-odin-t2958676
The T210R...XAR file is for the 210R:
https://drive.google.com/open?id=0B2iEgzRTFjrQTmI0ZjRBbWtOajQ&authuser=0
The ITV file is for the T210 (no R)
To download these ROMs, a torrent client is required (such as utorrent).
Anyone who wishes to contribute, please seed if you can after downloading ("Force Starting" the torrent will seed it indefinitely.)
Can I flash this on the SM-T210?
john410 said:
Can I flash this on the SM-T210?
Click to expand...
Click to collapse
I've seen both devices referenced together quite regularly, implying that they use the same ROM.
http://www.boeboer.com/samsung-galaxy-tab-3-7-sm-t210r-manual-guide-wifi/
And even use the same kernel from what I've read:
http://forum.xda-developers.com/showthread.php?t=2439564
I would take standard precautions, such as having a odin image of your original software available and performing a backup of your current system (if able).
Perhaps someone else has some insight to this question?
edit: Looks like I had my information wrong. Found where I obtained the ROM from, it is for the T210R model, and was not intended for the T210.
There are custom ROMs that have been patched for use on both devices, which is where my confusion came from, but this is an official ROM.
I have gotten my hands on the T210(no R) ROM file, and have update the Links above.
I am not responsible for any failed attempts at flashing to either device.
Greaper88 said:
I've seen both devices referenced together quite regularly, implying that they use the same ROM.
http://www.boeboer.com/samsung-galaxy-tab-3-7-sm-t210r-manual-guide-wifi/
And even use the same kernel from what I've read:
http://forum.xda-developers.com/showthread.php?t=2439564
I would take standard precautions, such as having a odin image of your original software available and performing a backup of your current system (if able).
Perhaps someone else has some insight to this question?
edit: Looks like I had my information wrong. Found where I obtained the ROM from, it is for the T210R model, and was not intended for the T210.
There are custom ROMs that have been patched for use on both devices, which is where my confusion came from, but this is an official ROM.
I have gotten my hands on the T210(no R) ROM file, and have update the Links above.
I am not responsible for any failed attempts at flashing to either device.
Click to expand...
Click to collapse
First, thanks for this. I have the T210R. I tried using this and had the same result, it updated the tablet instead of loading a completely new version. I did however run into a problem...the tablet had many for closes and reboots to a point it was unusable and so I reverted back to my backup. Did you see this? Maybe I had a bad download?
[email protected] said:
First, thanks for this. I have the T210R. I tried using this and had the same result, it updated the tablet instead of loading a completely new version. I did however run into a problem...the tablet had many for closes and reboots to a point it was unusable and so I reverted back to my backup. Did you see this? Maybe I had a bad download?
Click to expand...
Click to collapse
I did not have this problem, but I didn't have much on my Tab either. (Some apps don't play well with KitKat upgrades.)
Torrents have multiple segmented hashchecks to make sure you get an uncorrupted download, but it might still be possible. I'm reasonably sure my file is OK since I've used it (can't speak for the non R file though).
Did you clear your cache, and if possible your dalvik cache? I've read that some of those files interfere with upgrades.
If you can pinpoint the apps that are force closing, uninstall and reinstall them. Some apps, particularly paid apps, store their data differently on KitKat, and will automatically fail as a result.
Other option would be to try a factory reset and see if that fixes it. (I understand not wanting to do that though.)
One more thing, if your ROM isn't stock, or stock rooted (custom kernel should be ok too), you may have to flash 4.2 before the 4.4 ROM will work on the device.
Right guys, here i go, just joined and first question!!!
i have not ever rooted a sm-t210 but it was rooted when i bought it second hand!
i have linux installed on my p.c. and was wondering if there is a way to upgrade to and official KITKAT!
as stated i am having problems because my SM-T210 wifi only! and want to update to kitkat official release!
but was hoping also that there is a way/method to root via LINX and not via windows!!
if that is not possible how do i go about it on windows!! as i can use a friends WINDOWS-P.C. if i must!
ah also my SM-T210 does not have the options to change the function of the USB-function,,,
i.e.
it used to have an option to,, use as a mass storege, media transfer or use with samsung keis,,, or some thing of the sort
but this option has dissapeared! may have been my fault!!!! as i uninstalled some system apps,
now it crashes and reboots whenever i try to turn of USB-DEBUGGING options in DEVELOPER-OPTIONS !!!!
many thanks in advance,
Void.Naught
void.naught said:
Right guys, here i go, just joined and first question!!!
i have not ever rooted a sm-t210 but it was rooted when i bought it second hand!
i have linux installed on my p.c. and was wondering if there is a way to upgrade to and official KITKAT!
as stated i am having problems because my SM-T210 wifi only! and want to update to kitkat official release!
but was hoping also that there is a way/method to root via LINX and not via windows!!
if that is not possible how do i go about it on windows!! as i can use a friends WINDOWS-P.C. if i must!
ah also my SM-T210 does not have the options to change the function of the USB-function,,,
i.e.
it used to have an option to,, use as a mass storege, media transfer or use with samsung keis,,, or some thing of the sort
but this option has dissapeared! may have been my fault!!!! as i uninstalled some system apps,
now it crashes and reboots whenever i try to turn of USB-DEBUGGING options in DEVELOPER-OPTIONS !!!!
many thanks in advance,
Void.Naught
Click to expand...
Click to collapse
I do know that Heimdall is a multiplatform flashing tool substitute for Odin. Check out
http://forum.xda-developers.com/galaxy-tab-3/general/root-sm-t210-r-using-heimdall-t2936061
for more info. Hope it helps.
thank you for finding and posting the correct files for this tab
hi i have a galaxy tab kid t2105 rooted, is it possible to install any other rom after 4.1.2?
Greaper88 said:
Rooted devices and custom kernels that are otherwise stock should be fine.
Click to expand...
Click to collapse
Just to triple check, by the above quote you mean that if my tablet is currently rooted, I should still be fine to flash this update correct? [obviously it would become non-rooted once flashed and I'd have to re-root it as you mentioned you rooted after installing]
Also, how much space does this take up?
thanks
~J
ubuntujason said:
Just to triple check, by the above quote you mean that if my tablet is currently rooted, I should still be fine to flash this update correct? [obviously it would become non-rooted once flashed and I'd have to re-root it as you mentioned you rooted after installing]
Also, how much space does this take up?
thanks
~J
Click to expand...
Click to collapse
That is correct. I was rooted running the Werewolf custom OC kernel. I still had my tablet upgrade without wiping, and one other user has reported back saying the same. But I can not promise upgrade as opposed to overwrite.
The flash file once extracted, is about 1.4 GB, I don't know sizes beyond that. It does not repartition the tablet however.
Greaper88 said:
That is correct. I was rooted running the Werewolf custom OC kernel. I still had my tablet upgrade without wiping, and one other user has reported back saying the same. But I can not promise upgrade as opposed to overwrite.
The flash file once extracted, is about 1.4 GB, I don't know sizes beyond that. It does not repartition the tablet however.
Click to expand...
Click to collapse
Awesome, thanks!
~J
Could you upload the T210 ITV file? This torrent is going to take 10 hours
No system file
Well this is awesome, system won't mount and I don't have a backup. Samsung website does NOT have the stock firmware, and attempting to get it for another country just to get this to load so I can flash a ROM leaves me with having to download at 15kbs. I am in the process of selling this to someone for their kid... And there are ZERO seeders for these files. Lovely.
Sorry, m'y post an error
ragnaroksangel said:
Well this is awesome, system won't mount and I don't have a backup. Samsung website does NOT have the stock firmware, and attempting to get it for another country just to get this to load so I can flash a ROM leaves me with having to download at 15kbs. I am in the process of selling this to someone for their kid... And there are ZERO seeders for these files. Lovely.
Click to expand...
Click to collapse
Are you looking for the Stock Rom?
Darthlord064 said:
Are you looking for the Stock Rom?
Click to expand...
Click to collapse
I am, can you help?
Greaper88 said:
I do know that Heimdall is a multiplatform flashing tool substitute for Odin. Check out
http://forum.xda-developers.com/galaxy-tab-3/general/root-sm-t210-r-using-heimdall-t2936061
for more info. Hope it helps.
Click to expand...
Click to collapse
For some (unknown) reason, Odin3 nor JOdin3 doesn't seem to work for flashing my Samsung Galaxy Tab3 device. For that reason I tried Heimdall-Frontend, but to make that work you need to extract the content of a stock ROM first.
Anyways, it still didn't lead to get my device into factory reset yet.
But that's another story on which I still have not yet found the answers needed to get the device successfully back into factory reset.
My guess is that the 'system.img' file, of Android 4.4.2, successfully has been loaded from Heimdall-Frontend, yet by going into reboot right away after Heimdall-Frontend releases the connected device, the download may be deleted.
I read that the cause of that may lie in the fact that Android 4.4.2 is only an update and no full ROM.

Categories

Resources