Hey guys,
I just got my phone and it updated to 4.4 pretty much out of the box. I still wanted to root so I used a method I found on here (will find if necessary) which is supposed to not trip the KNOX by putting the phone into "Custom Mode." Everything went fine until I tried to use ROM Manager to install CM.
When I boot I get the message "System software not authorized by Verizon Wireless has been found on your phone. Please turn off your phone and go to the nearest Verizon Wireless store for help." I've tried reflashing using Odin, clearing the cache and factory resets, but I get the same error every time.
I'm currently downloading another stock ROM which might work, but I wanted to see if anyone else has had this problem?
Thank you!
mortified21 said:
Hey guys,
I just got my phone and it updated to 4.4 pretty much out of the box. I still wanted to root so I used a method I found on here (will find if necessary) which is supposed to not trip the KNOX by putting the phone into "Custom Mode." Everything went fine until I tried to use ROM Manager to install CM.
When I boot I get the message "System software not authorized by Verizon Wireless has been found on your phone. Please turn off your phone and go to the nearest Verizon Wireless store for help." I've tried reflashing using Odin, clearing the cache and factory resets, but I get the same error every time.
I'm currently downloading another stock ROM which might work, but I wanted to see if anyone else has had this problem?
Thank you!
Click to expand...
Click to collapse
You are permanently stuck on the TW 4.3 OTA because the bootloader is signed with special keys that prevents:
-installing a custom recovery
-flashing custom roms/kernels
-downgrading your software below 4.3
If you can boot into download mode, do this 4.3 soft brick method.
With TW 4.3 OTA, all you can do is root using a tool called: Saferoot.
If you have 4.3 stock firmware you can root and that's it, no custom recovery, no custom rom, kernel, nothing, and just a heads up there are like 10 threads where people don't read and have done what you have, you need to flash the Odin 4.3 image for you phone to work again, never take an ota, enjoy your locked down device now
Sent from my SCH-I535 using XDA Premium 4 mobile app
SlimSnoopOS said:
You are permanently stuck on the TW 4.3 OTA because the bootloader is signed with special keys that prevents:
-installing a custom recovery
-flashing custom roms/kernels
-downgrading your software below 4.3
If you can boot into download mode, do this 4.3 soft brick method.
With TW 4.3 OTA, all you can do is root using a tool called: Saferoot.
Click to expand...
Click to collapse
Worked perfectly! Thank you so much!
mortified21 said:
Worked perfectly! Thank you so much!
Click to expand...
Click to collapse
My pleasure but all the thanks is owed to ThePagel, make sure to post your success in his thread. The more people that report their success with that method, then the less fear someone else may have in using that should they suffer the same experiences. :victory::good::good:
If you need any updates on the state of TW 4.3 then keep this discussion thread bookmarked.
I did the same thing today. The 4.3 update installed by itself!!! So i rooted it using Saferoot,
i installed rom manager, clicked the Install rom from sd card and i got that message. it will repeat that message and it wont boot. So i went into Odin mode and hit the volume down button to restart it. And after that it booted normally.
So basically i am stuck with 4.3? and is there 4.4 out for our phones yet?
also forgot to mention, it says my OS is custom when i first realized it updated.
AURMEND said:
I did the same thing today. The 4.3 update installed by itself!!! So i rooted it using Saferoot,
i installed rom manager, clicked the Install rom from sd card and i got that message. it will repeat that message and it wont boot. So i went into Odin mode and hit the volume down button to restart it. And after that it booted normally.
So basically i am stuck with 4.3? and is there 4.4 out for our phones yet?
also forgot to mention, it says my OS is custom when i first realized it updated.
Click to expand...
Click to collapse
Once you successfully updated with 4.3, you stuck with 4.3, there is no going back or flash anything and 4.3 is the latest factory rom for now. There's no 4.4 yet for our phone. There is custom 4.4 but only for people who didn't take the 4.3 update. Since they still have unlocked bootloader so they could load any custom rom.
buhohitr said:
Once you successfully updated with 4.3, you stuck with 4.3, there is no going back or flash anything and 4.3 is the latest factory rom for now. There's no 4.4 yet for our phone. There is custom 4.4 but only for people who didn't take the 4.3 update. Since they still have unlocked bootloader so they could load any custom rom.
Click to expand...
Click to collapse
Dang this sucks. I have no idea how it installed automatically then. I was listening to music the whole time. And I was trying to get a custom 4.4 after the update...
AURMEND said:
Dang this sucks. I have no idea how it installed automatically then. I was listening to music the whole time. And I was trying to get a custom 4.4 after the update...
Click to expand...
Click to collapse
Yep! sucks big time!!
Q&A for [ROM][5.X][XT1028/XT1031] CyanogenMod 12.1 for Moto G [METICULUS]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][5.X][XT1028/XT1031] CyanogenMod 12.1 for Moto G [METICULUS]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
no calls or data
I have an xt1031 flashed to page plus. I have bootloader 41.19 from a failed lollipop update attempt. I flashed the 4/8 build and I can't make calls and do not have 3g. The network shows as 31000. What should I do?
I have been trying each of his builds and anything newer than 4/8 data hasnt worked I'm on boost if that makes any difference
Verizon?
Good morning,
I'm on an XT1028 still with service through Verizon Prepaid; my bootloader is unlocked and I'm on an optimized KK stock ROM at the moment. I've been following the development of Meticulus' CM12.1 through the primary thread and there has been a lot of discussion as to problem solving and issues on the XT1031 and various carriers but little mention as to the status of the latest weekly builds on the XT1028 still on Verizon in terms of functionality or hiccups from users. Does anyone have the latest versions running on their 1028? Are any of the data or service issues present when running it on Verizon?
Thanks.
Followup: Installed the latest 4/25 weekly on my XT1028 on Verizon Prepaid. Installed fine, got phone and SMS, but the network is identified as Boost Mobile and I have no mobile data. Is there a fix? Is a build.prop edit necessary for Verizon? Thanks.
Reboot then bootloop
Hi, I've been trying to get my installation of this ROM working for two days now, but keep running into an issue that I cannot seem to solve
My device is a 2013 Moto G XT1031 (Boost Mobile) with Bootloader version 41.05 and the latest CWM recovery.
The issue has been occurring on build 4/8, 4/25, and 5/2.
The exact steps I have been taking to install this ROM (for all builds) and then what happens:
Bootloader is unlocked
Going into recovery and wiping dalvik cache then factory reset (wipe)
Installing CM11 (latest snapshot) [on my first attempts only, not afterwards since it made no difference anymore]
Factory reset again (just to be certain)
Installing the zip for a build specified above
Installation always succeeds with no errors
Installing gapps-L-3-28-15 with success
Reboot into android
First boot always succeeds (and takes appropriate length of time)
Set up the phone (connect to wifi, google account, restore my apps [18 of them, just common popular ones, mostly Google actually], and apply a theme
Use it for a couple minutes (enable root and usb debug in Developer Settings, set my apps up, etc)
Restart two or three times without any hiccups
Suddenly, after a random reboot, the boot animation happens twice (instead of only once how it supposed to be)
Phone boots and shows "Android is starting..." and optimizes the apps (104 of them) one by one
Goes to "Starting apps..." and succeeds
The phone shows the lockscreen, but only for approximately 1-2 seconds
Phone reboots
CM boot animation runs twice, once for a long time then again for a shorter period of time
Phone goes through process described above (Android is starting, optimizes, then flashes lockscreen)
This just happens again and again and again
Steps I've taken to try and remedy the issue:
Run: "adb reboot" from computer while phone is optimizing apps
Hard reset the phone by holding the power button for 15 seconds
Run: "adb reboot bootloader" from computer when possible, then go into recovery and wipe both dalvik and normal cache
Swipe on the lockscreen as soon as I see it to see if I can get in (lockscreen does not respond though)
Go into recovery and shut the phone off, then start again
Let it loop for about 2 hours
I had also tried leaving the phone overnight looping, and when I woke, it was still looping, but after a eight or so more hours, I came back and found that it had booted and stayed on (and was working completely normally).
The phone was running stock 4.4.2 completely fine before this (with no reboot issues). I attempted installing the latest version of BlissPop, which exhibits a similar but still different issue (it would always boot into android [and not loop], but after a couple restarts, it showed an error about the System UI crashing that would pop up every time I dismissed it, and continued doing so after each restart after that). CM11 seems to be running well on the phone (but only in my very limited test while transitioning between ROMs and such).
I unfortunately cannot provide a log due to not being able to run any logging app during bootup, but hopefully I have provided enough details above to allow understanding of the issue and maybe bring suggestions on how to fix it. I can provide any more information needed on request. I really would like to get this phone back up and running (and especially on this ROM as I do love the work the creator has put into it).
Sorry for the very large wall of text :| Thank you in advance for any suggestions on how to proceed from here
tartilc said:
My device is a 2013 Moto G XT1031 (Boost Mobile) with Bootloader version 41.05 and the latest CWM recovery.
Click to expand...
Click to collapse
Having not experienced your issue I can't say for certain, but it may be possible you need to update the bootloader to at least 41.13, which is the 4.4.4 KitKat BL? I'd run it past @Meticulus and see if he might have some direction, there. Also, does the theme you apply have a different bootanimation, by any chance? There is a known issue/potential memory leak related to large boot animations on Lollipop that can cause failures at boot or bootloops.
a_gert said:
Having not experienced your issue I can't say for certain, but it may be possible you need to update the bootloader to at least 41.13, which is the 4.4.4 KitKat BL? I'd run it past @Meticulus and see if he might have some direction, there. Also, does the theme you apply have a different bootanimation, by any chance? There is a known issue/potential memory leak related to large boot animations on Lollipop that can cause failures at boot or bootloops.
Click to expand...
Click to collapse
Thank you for the advice I have downloaded a file with the name of falcon_boost_user_4.4.4_KXB21.14-L1.57_57_release-keys-cid9.xml.zip, unzipped it, then flashed according to the directions posted on how to restore the stock firmware. Everything during installation seemed to go smoothly, but at this point, I am stuck again. When I try to boot up, it just shows the splash screen ("Warning Bootloader Unlocked") and stays there indefinitely :| I have hard reset the phone and got into boootloader, which states that I am now on 41.13, but it just stays at that splash screen Should I boot into TWRP and try flashing an update.zip of the stock 4.4.4 Boost ROM? What else can I try?
EDIT: Flashing the stock update did not work, but I was able to install CM11 (so I'm am on bootloader 41.13 with CM11 currently)
EDIT TWO: Yes! I'm on bootloader 41.19 now and official CM12.1 nightly is booting!!
EDIT THREE: NOOOO It just started bootlooping again! CM animation twice, "Android is starting...", lockscreen, then cycle again. It happened after I changed my DPI from 320 to 280 (never restarted, just looped from then on).
I now have a logcat! I'm having trouble understanding what it is talking about, but I started logging as soon as the "Android is starting..." box changed status from "Optimizing apps x of x" to "Starting apps" and then stopped logging after a couple seconds of the boot animation. It is attached below (split into three parts).
EDIT: Attached what might be a better logcat reading (recording started right before lockscreen showed, I tried unlocking it, then stopped as soon as I saw the blue animation)
tartilc said:
Thank you for the advice I have downloaded a file with the name of falcon_boost_user_4.4.4_KXB21.14-L1.57_57_release-keys-cid9.xml.zip, unzipped it, then flashed according to the directions posted on how to restore the stock firmware. Everything during installation seemed to go smoothly, but at this point, I am stuck again. When I try to boot up, it just shows the splash screen ("Warning Bootloader Unlocked") and stays there indefinitely :| I have hard reset the phone and got into boootloader, which states that I am now on 41.13, but it just stays at that splash screen Should I boot into TWRP and try flashing an update.zip of the stock 4.4.4 Boost ROM? What else can I try?
EDIT: Flashing the stock update did not work, but I was able to install CM11 (so I'm am on bootloader 41.13 with CM11 currently)
EDIT TWO: Yes! I'm on bootloader 41.19 now and official CM12.1 nightly is booting!!
EDIT THREE: NOOOO It just started bootlooping again! CM animation twice, "Android is starting...", lockscreen, then cycle again. It happened after I changed my DPI from 320 to 280 (never restarted, just looped from then on).
Click to expand...
Click to collapse
Whoa, that's a lot of jumps! Be careful with the bootloader, as once you're on the Lollipop BL (and it appears you've already made that jump), you're kind of locked into LP ROMs from this point out. The point you were failing on the 4.4.4 stock would probably have been a good time to go in and manually restore things via fastboot just to make sure all your partitions were straight. What did you use to update your bootloader to 41.19? And have you tried a ROM specifically designated for the CDMA-only XT1031/Boost? I've only used the Meticulus and the unofficial Linaro CM12.1 buld by Cody on my XT1028 specifically because I know they're CDMA compatible, so I'm not sure where the official CM12.1 sits on that right now.
I know there exists an actual legitimate stock 5.0.2 Boost ROM and it's possible that may be able to be restored manually as a last resort, so don't move too hastily.
XPOSED on Meticulous Rom?
Is there any way to get XPOSED working? I really want gravity box for LL.
Awesome. I was going to download this from your site today but it is showing an error with connecting to its database. None of the computers i have access to can get on your site.
no wifi no cellular network
and after i flashed cynogenmod 12.0 in my moto g 2014, there is no wifi nor network :'( what am i suppose to do now?
Ui crash
Is there anything special i need to do to flash this update? i'm running on the 408 build and every time i try ti go the next version there is an issue. Either data stops working or i get a system Ui crash like on the 530 build. I would love to get this issue fixed with the 606 build. Besides that, great job.
a_gert said:
Whoa, that's a lot of jumps! Be careful with the bootloader, as once you're on the Lollipop BL (and it appears you've already made that jump), you're kind of locked into LP ROMs from this point out. The point you were failing on the 4.4.4 stock would probably have been a good time to go in and manually restore things via fastboot just to make sure all your partitions were straight. What did you use to update your bootloader to 41.19? And have you tried a ROM specifically designated for the CDMA-only XT1031/Boost? I've only used the Meticulus and the unofficial Linaro CM12.1 buld by Cody on my XT1028 specifically because I know they're CDMA compatible, so I'm not sure where the official CM12.1 sits on that right now.
I know there exists an actual legitimate stock 5.0.2 Boost ROM and it's possible that may be able to be restored manually as a last resort, so don't move too hastily.
Click to expand...
Click to collapse
Yeah that is a lot of jumps I'd be hella nervous myself lol
K well guys today is your day , as a_gert stated there is a boost 5.02 , and it does work fine on any cdma xt1031 so first flash that
-depending on signal you may wish to update your modem also there is only 4.4 modem for boost public
Buuuutttt nvm all that for now
The problem the ONLY problem I have had when bootlooping was that it was not prepped correctly and my phone came with 41.19 and came unlocked-
1.) Make sure you are on c/O SuperR-Developer -- PhilZ-Touch-6.59.0_LPK .img OR twrp * twrp-2.8.6.0.1-falcon_STOCK.img
**Notice For Even PhilZ I only Named the -IMG- Version which means flash it with adb properly please
***if ever after you flash it via recovery it will show partition mismatch which apparently is no problem just that the custom recovery does not match the factory one is all.. ..
1.) Download PhilZ-Touch-6.59.0-LPK.img to PC
2.) Reboot to bootloader
3.) Plug phone into PC
4.) Open terminal in directory where the img is located
5.) Issue the following command:
Code:
fastboot flash recovery twrp-2.8.6.0.1-falcon_STOCK.img
2.) Do a format of System w/EXT4 AND REBOOT INTO RECOVERY
3.) Format dalvik/art + Cache + Data w/EXT4 & REBOOT INTO RECOVERY
4.) Format Data PLUS data/media with f2fs then Do the 'factory wipe' then manually format data/media with f2fs again please ..
- SIDELOAD THE ATTACHED STOCK LOLLIPOP NO GAPPS GIVE IT TEN MINUTES REBOOT FEW TIMES/ POWER DOWN ONCE & REBOOT AGAIN
5.) Reboot into recovery and flash the first zip I have attached (I_nomodem is just IF you find your 4.4 radio baseband worked better and want to format it for LP again in the future WITHOUT LP radio included)
****EDIT - SEE VERY BOTTOM OF POST CENTERED AREA LOL
6.) Power off & reboot into recovery manually
7.) Flash your Rom (OR STOCK LOLLIPOP DEBLOATED AGAIN) + Kernel(if any custom one) + Gapps -wait 5-15 minutes for initial boot
* I recommend AeroKernel for the included stock lollipop 5.0 debloated if not the stock kernel or after flashing and few reboots to settle ,just follow instructions from that thread if any are needed..
Please anyone with any moto g don't think updating your bootloader is needed or even really safe whatsoever it is THE main reason moto phones get bricked or messed up otherwise it is not necessary or any kind of improvement yes once you are on an LP one leave it be..
Other flashing yeah okay, bootloader no if so proceed with utmost caution.
After this your modem will be updated with the cdma LolliPop one, if you have any signal issues or what not go to the stock modems section for your specific phone and flash the one for your specific carrier and/or find the "update RIL" flash thingie on here in moto G section and follow instructions but the boost modems work on all cdma variants of Moto G..
For whatever reason I could not upload files to xda I tried five times it kept dying so here there are on googldrive :good:
**Do not Click individual Item Use the Download Arrow At the Very Top of Page to DL the zip properly plz
1.) Falcon LolliPop Part Updater + Modem
2.) Falcon LolliPops Part Updater (No Modem)
_____________________________________________________________________________________________________________________________
--EDIT #2-- LolliPop 5.0 Falcon XT1031 debloated
SIDENOTE: IF YOU FORMAT DATA/MEDIA & DO NOT KNOW HOW TO SIDELOAD THE ABOVE STOCK DEBLOATED ZIP I'M PRETTY SURE YOU'RE NOT GONNA LIVE TO TELL BOUT IT
BE PREPARED TO SIDELOAD - REBOOT IMMEDIATELY AFTER SIDELOAD THE ZIP ROM IS COMPLETE NOT INTO RECOVERY NOT ANYWHERE ELSE SYSTEM REBOOT
-And wait 5-10 Minutes For First Boot - You Only Need to Do this for the first LP rom loadin after that normal flashing do NOT format data/media anymore after this initial setup
--You can try to just use the script, but it did not work for me after many tries the above was the real solution and has been perfect since
2,3,4,5,6,7
·Install flashable (Boost Mobile/CDMA XT1031 only):
·Download falcon_PhilZ-Touch-6.59.0_LPK.zip to phone
·Reboot into current custom recovery
·Flash zip
·Enjoy!
Use the script again to prepare you partition properly anytime you are about to flash a new rom clean after factory wipe/ format is done..
As I said before data/media is never necessary again after this and MAY not be this time but it is the only thing that kept me out of bootloops ,and if you do it yeah it will force you to sideload your rom it erases all leftovers and your rom zips off the internal card and formats them for fresh start The script does not format /media guys k no worries
------TWRP 2.8.6..1 does not seem to restore properly- -system write only thing .. PhilZ-Touch is fine as is twrp-2.8.6..0 also
Nice, got 41.19 BL!
I tested this and works fine, now i have my shiny new moto g running AICP. Thanks @shoobiedoobiiwhompwop!
rammsteinaus said:
I tested this and works fine, now i have my shiny new moto g running AICP. Thanks @shoobiedoobiiwhompwop!
Click to expand...
Click to collapse
K welcome
Arrite guys for a little clearer step by step see here please apologies carrying on and on I have been gone quite some time here http://forum.xda-developers.com/mot...-moto-g-xt1031-lollipop-t3132974#post61346260
It actually Runs really nice, really REALLY nice once the system app package I am adding shortly was used and tweaked out ..
Is it safe to flash cyanogenmod onto the verizon moto G - 1028 4.3 plus
Hello community ,
I had serious problems flashing cyanogenmod onto a galaxy S3 that was running stock 4.3 , verizon bricked my S3 , and said that the software was not authorized by Verizon. Does this problem exist across the board for any verizon phone running 4.3 or higher ?? If so ... then anything to do with flashing cyanogenmod onto a verizon phone should have warnings in BIG RED LETTERS ... because you cannot even buy a new phone with 4.2 on it anymore.
Issues flashing cm12.1 on XT1031 Please Help
Tried flashing the second to last release on 2 of my moto g xt1031's and I keep getting diff issues. This is what I did:
I had complete stock 4.4.4
unlocked bootloaders,
flashed latest TWRP,
Did a factory wipe
Flashed CM12.1
Flashed Gapps
Rebooted
Stuck in boot loop--> waited over 30mins and rebooted a few times. No luck.
I heard to try flashing CM11 first, then flashing 12.1 so I did this:
Back to TWRP -->factory wipe
Flash cm11
reboot to cm11
reboot to TWRP -->factory wipe
Flash CM12.1
Now I can get past the boot logo and begin setup, however, it will randomly reboot to the boot logo and then back to setup after a minute or so- erasing anything I've already input. Sometimes I could make it through the setup to the desktop, but then it would do the same thing. Had this same exact issue on both of my xt1031s with the same process used for both.
After this I tried doing a factory wipe and then also wiping /data and /system in the advanced wipe options and then flashing cm12.1 and still had the same issue of the rebooting. At some point I must have done somthing, but I started trying to just flash cm12.1 several times over to see if it would stick and I noticed when I did the factory wipe I was getting a parsing error so I tried doing a full data format, and fix data filesystem. I'm not sure what format it was supposed to be so I did a ex4. THat stopped the parsing error, but still having the same issues.. any help would be appreciated.
Moto G CDMA issues
citizen3rased said:
Tried flashing the second to last release on 2 of my moto g xt1031's and I keep getting diff issues. This is what I did:
I had complete stock 4.4.4
unlocked bootloaders,
flashed latest TWRP,
Did a factory wipe
Flashed CM12.1
Flashed Gapps
Rebooted
Stuck in boot loop--> waited over 30mins and rebooted a few times. No luck.
I heard to try flashing CM11 first, then flashing 12.1 so I did this:
Back to TWRP -->factory wipe
Flash cm11
reboot to cm11
reboot to TWRP -->factory wipe
Flash CM12.1
Now I can get past the boot logo and begin setup, however, it will randomly reboot to the boot logo and then back to setup after a minute or so- erasing anything I've already input. Sometimes I could make it through the setup to the desktop, but then it would do the same thing. Had this same exact issue on both of my xt1031s with the same process used for both.
After this I tried doing a factory wipe and then also wiping /data and /system in the advanced wipe options and then flashing cm12.1 and still had the same issue of the rebooting. At some point I must have done somthing, but I started trying to just flash cm12.1 several times over to see if it would stick and I noticed when I did the factory wipe I was getting a parsing error so I tried doing a full data format, and fix data filesystem. I'm not sure what format it was supposed to be so I did a ex4. THat stopped the parsing error, but still having the same issues.. any help would be appreciated.
Click to expand...
Click to collapse
Hello Citizen 3 , You are farther along than me. I have only successfully flashed cyanogenmod once , and that was on an S3 so it was straightforward. I still have not unlocked my bootloader. I have not been able to copy and paste the long strings of characters from motorola , inside command prompt. It would be so nice if Meticulus or one of the other developers could get this to be an official release. The Moto G , and a few other inexpensive phones ( LG realm , Kyocera Hydro latest version ) would work like greased lightning , if they were running CM12. Any help that you could offer with pasting the strings of unlock code would be so appreciated.
Alright so I have a 2013 Moto G, and basically in the past while on KitKat I've rooted my phone, given it custom recovery (TWRP), and messed around with the ROM (changed it to CM, PA and a few others and back). Now I've come to update to Lollipop and of course I need stock recovery to update my phone via OTA, and when it first prompted me to update, I had TWRP and I didn't really think, I just updated, this sent my phone into a bootloop, rebooting straight into TWRP every time I turned my phone on. Luckily I had a backup and I just restored to that and that fixed it. Recently I've been trying to fix the correct stock recovery for my phone so I can update, and I found some MotoTool AIO thing, and that changed my recovery back to KitKat stock (or so it says), now when I go into recovery it LOOKS like stock, can do everything you could normally do with stock recovery, but when I came to update it, about a quarter of the way though the update process, it errors and reboots my phone. Luckily this time my phone recognizes it has errored and just cancels the update instead of sending me into a boorloop. Any help would be greatly appreciated.
Thank you,
Tom.
Hi, thank you for using XDA Assist. To update to 5.x you need to be 100% stock. That means no custom recovery, no root,etc. It would be best to ask your question here,http://forum.xda-developers.com/moto-g/help where the experts on your device reside. And you may need this,http://forum.xda-developers.com/showthread.php?t=2542219
Good luck!
Thread closed.
Please could someone help ! I'm trying to unlock my XT1032. I have the correct Sim-Unlock (network unlock) code from my old telco, but... it won't work because the phone is rooted, bootloader unlocked (S-ON) running CM13.
I figured that returning it to a stock build would allow me to unlock the phone, then I could re-root and return to CM13 on my new network.
However..... there are about a dozen guides on returning a Moto G to stock and the first one I tried left the phone stuck on the 'Warning: Bootloader is unlocked' message. Since then, I've tried several other guides and have got nowhere fast. I've been on this for four hours now and the only thing I seem to be able achieve is to get TWRP or CWM recovery on there by flashing from fastboot. Every other image I try either gives 'preflash validation failed' messages, sticks on the Bootloader Unlocked screen or gets it stuck in a bootloop!
I just want to switch networks... Why is this so bloody difficult ?
What Firmware did your XT1032 originally come with? or which Carrier?
Kitkat I think, and it's Tesco (UK).
I subsequently did the OTA update to Lollipop and then.... WHOAAAAA.... hold on... it's booting !!!
I don't know how, or what I've done to get this far, but the only thing I can think of that's changed is that the battery is now at 100% charge. It appears as though it's successfully flashed the 5.1 untouched ROM from http://forum.xda-developers.com/devdb/project/?id=7981#downloads
But, I've tried flashing that loads of times this evening and it's failed everytime.
Having said that it's booting, it's sitting here on the Motorola logo - and it hasn't got that far in the last five hours.... I'll be back shortly !
Update: It worked ! It completed the boot, I put the new SIM in, it asked for the unlock code and this time it worked OK. Now I'm tackling putting CM13 back on it. I think I'll stick with TWRP rather than CWM recovery, as long as TWRP can handle the automatic updating for the CM nightlies.
I have no idea what went wrong there - maybe it was just that the battery had to be at 100% ?? Who knows... Thankfully I doubt I'll be tackling that again !
I don't know if things have changed, but I would be careful with OTA Updates in CM. People have hard-bricked (phone is effectively destroyed) applying updates in this way. I also suggest you avoid official Motorola updates, rather use the factory firmware images available here: (which already include the content of OTA Updates)
[INDEX] Moto G [Falcon][Peregrine] Factory Firmware Images
Thanks for replying anyway mate. In the end, it's all good now. Unlocked and back on CM13 and on my new network !
Ahhh... not so good after all. The phone reboots every time you try to uninstall an app. I've tried flashing back to CM12.1, the latest stable release, and it does the same, so I've obviously screwed something up along the way.
Could someone help me flatten this thing completely and get it working normally please?
I've tried reflashing loads of times, even tried Cyanogen Recovery instead of TWRP but nothing I do gets rid of this reboot problem.
Can anyone assist please?
OK, so I've followed the procedure detailed here: http://forum.xda-developers.com/moto-g/development/rom-stock-motorola-lollipop-rom-t3017510 and flashed the Untouched 5.0.2. EU Stock ROM successfully, but it still reboots when you try to uninstall any app.
Whatever it is that's causing this is not getting overwritten by the flashing procedures I'm using is it ?
HELP !!!!!
@aneng64 - You have not done what I told you to do. Read my post again.
Yes I did... and I still had the same problem. It was only once I stopped trying to flash zips from TWRP and used mfastboot to flash the whole set individually (non-hlos, motoboot etc) that I got it to behave. The issue, incidentally, seemed to be the same one mentioned elsewhere here that also causes settings to crash when you try to go into settings, security.
Once it was stable with a stock ROM, I was able to flash CM13 again and it's now sorted. Thanks for your help anyway.