Database Info

[Q] Android 4.1.2 10/29/12 Milestone 1

Hello Guys,
i've got problem with this ROM.
The wi-fi doesn't work at all and if i click on Memory into setting menù it crashes...
Any idea? I can't write into the relative post.
Thank you very much in advance!
FoX

What ROM, bro?

Ruwin said:
What ROM, bro?
Click to expand...
Click to collapse
Hi Buddy,
this one: http://forum.xda-developers.com/showthread.php?t=1862156
i don't know why ;(
I can't write the problem into that thread!
Thank you very much in advance!
foX!

FoXMuLd3R said:
Hi Buddy,
this one: http://forum.xda-developers.com/showthread.php?t=1862156
i don't know why ;(
I can't write the problem into that thread!
Thank you very much in advance!
foX!
Click to expand...
Click to collapse
Maybe the problem is due to the Kernel...
I tried to install again the boot.img but wi-fi doesn't work at all!!!
Please could someone help me?
Thank you in advance!
foX!

FoXMuLd3R said:
Maybe the problem is due to the Kernel...
I tried to install again the boot.img but wi-fi doesn't work at all!!!
Please could someone help me?
Thank you in advance!
foX!
Click to expand...
Click to collapse
Wifi works fine. It's definitely user error
Sent from my HTC VLE_U using xda premium

So, you get some FC's and WiFi doesn't work... ok.
1. Have you tried flashing the boot.img (the correct one, extracted from the ROM zip) with fastboot? Well, try it again! "adb fastboot flash boot boot.img" and make sure that you have the boot.img in the folder where you run the command. This way you will reflash the kernel and at least the WiFi problem should go away.
VERY IMPORTANT after you run the flash boot command in fastboot, it is recommended to do a "fastboot erase cache" before booting.
2. Now, if this doesn't fix your issues, try wiping everything from your phone (do a Titanium bkp for your apps, not your system settings) and go with a full wipe (Dalvik included). Flash the ROM once again and after that is complete, don't boot the phone. Do a data and cache wipe again, and reboot to bootloader. Get in fastboot usb mode and repeat the first step.

Ruwin said:
So, you get some FC's and WiFi doesn't work... ok.
1. Have you tried flashing the boot.img (the correct one, extracted from the ROM zip) with fastboot? Well, try it again! "adb fastboot flash boot boot.img" and make sure that you have the boot.img in the folder where you run the command. This way you will reflash the kernel and at least the WiFi problem should go away.
VERY IMPORTANT after you run the flash boot command in fastboot, it is recommended to do a "fastboot erase cache" before booting.
2. Now, if this doesn't fix your issues, try wiping everything from your phone (do a Titanium bkp for your apps, not your system settings) and go with a full wipe (Dalvik included). Flash the ROM once again and after that is complete, don't boot the phone. Do a data and cache wipe again, and reboot to bootloader. Get in fastboot usb mode and repeat the first step.
Click to expand...
Click to collapse
Thank You very very much!!!
The problem was the Kernel (boot.img).
After i upgraded to the last 4.1.2 the kernel stopped working.
I tried to wipe all data and cache with no good results.
This night i tried to flash again for the third time the boot.img by Toolkit 1.2 and it started working again!!!
So i wiped all data and cache again. Installed the 4.1.2 again, the gapps and started to setup all the stuff again
Thank you for your answers and @mikeyinid too!!
Cheers!
foX!

I tried to install now the new aokp_ville_unofficial_Oct-31-12.zip!
Damn!! Same damned problem...
I flashed it by recovery cleaning cache and partition because i don't want to lost my data.
I don't know why the Kernel stop working flashing the zip by recovery! ;(
Any idea?!?!?
I don't want to setup always all my stuff into the phone...
Now i tried to wipe all data and cache but the phone don't want to boot!
It driving me crazy!!
I'll try to flash the kernel again right now!
foX!

FoXMuLd3R said:
I tried to install now the new aokp_ville_unofficial_Oct-31-12.zip!
Damn!! Same damned problem...
I flashed it by recovery cleaning cache and partition because i don't want to lost my data.
I don't know why the Kernel stop working flashing the zip by recovery! ;(
Any idea?!?!?
I don't want to setup always all my stuff into the phone...
Now i tried to wipe all data and cache but the phone don't want to boot!
It driving me crazy!!
I'll try to flash the kernel again right now!
foX!
Click to expand...
Click to collapse
The best practice for now is flashing the boot.img (containing the kernel) via fastboot. Try that, because the custom recoveries cannot flash the boot.img, not until we get s-off-ed.
Good Luck!

Ruwin said:
The best practice for now is flashing the boot.img (containing the kernel) via fastboot. Try that, because the custom recoveries cannot flash the boot.img, not until we get s-off-ed.
Good Luck!
Click to expand...
Click to collapse
Hi Buddy!
Thanks for patience!
Now when i try to select the rom from the sdcard it says can't mount SDCARD!!!
The phone, from the recovery, don't see the SDCARD...And don't want to boot :/ (bootloop infinite)
Is it terrible?!?! ;D
Is there a way to fix it?
Thank you very much!
foX!

Maybe i found a way: http://forum.xda-developers.com/showthread.php?t=1707550
The trouble I'm facing should be a soft brick certainly...
foX!

Ok. All is gone fine!
But i will came back to the original ROM from HTC because there are no roms without bugs.
I will only install the recovery, i'll root it and i will unlock the bootloader!
Anyway thanks to all people who helped me!
Regards!
foX!

FoXMuLd3R said:
Ok. All is gone fine!
But i will came back to the original ROM from HTC because there are no roms without bugs.
I will only install the recovery, i'll root it and i will unlock the bootloader!
Anyway thanks to all people who helped me!
Regards!
foX!
Click to expand...
Click to collapse
It's great that you managed to fix it. And when you discover the fix yourself, it's even more rewarding
I can recommend TrickDroid, it's close to stock, actually very close to stock, with just some great tweaks added, and it has no bugs. You can rely on this rom as a daily driver.
Cheers!

Ruwin said:
It's great that you managed to fix it. And when you discover the fix yourself, it's even more rewarding
I can recommend TrickDroid, it's close to stock, actually very close to stock, with just some great tweaks added, and it has no bugs. You can rely on this rom as a daily driver.
Cheers!
Click to expand...
Click to collapse
I've got two One S,
on the second one i'll try the trickdroid than!
Could you tell me which kind of tweak you think are cool and these aren't in the stock version?
Ciao! ;D
foX!

FoXMuLd3R said:
I've got two One S,
on the second one i'll try the trickdroid than!
Could you tell me which kind of tweak you think are cool and these aren't in the stock version?
Ciao! ;D
foX!
Click to expand...
Click to collapse
Well, first thing, the quick settings in the notification bar. I can't use the phone without them . Take a look at the trickdroid thread for your device (the 8.1.0 if you have S4) and see what fits you.
Cheers!

Ruwin said:
Well, first thing, the quick settings in the notification bar. I can't use the phone without them . Take a look at the trickdroid thread for your device (the 8.1.0 if you have S4) and see what fits you.
Cheers!
Click to expand...
Click to collapse
You're right!
I'm trying all the different settings...Isn't a way to found the different screenshots for the different settings?
I'm trying all setting wiping every time and installing again the ROM.
I can wipe and reinstall the ROM without problem with the kernel. I don't need to fastboot the kernel everytime. Just install the ROM by recovery...
Thank you very much buddy for talking me about this rom.
Bye!
foX!

[Q] Xperia E CM10 - Battery stuck @ 100%

Hey. I have this Xperia E C1504 (currently using C1505 stock). I installed CM10 on it some time ago, and I noticed that the battery level was stuck at 100%. This even caused the battery to be used beyond capacity and I had to get my phone fixed at the Sony service center (I relocked the bootloader for the trip).
Why did this happen? Why was the battery stuck at 100%? Anybody? The ROM I used is this one: http://forum.xda-developers.com/showthread.php?t=2330638
EDIT: Forgot to mention this, but the battery works awesomely in stock.

Bump. Nobody? Please? I really want CM10, it was awesome while I had it.

Try to reflash kernel
Sent from my Xperia E dual using Tapatalk

Abadguy10 said:
Try to reflash kernel
Sent from my Xperia E dual using Tapatalk
Click to expand...
Click to collapse
Happened both times I installed CM10. I may try the FXP version, or the jjm34 version with the FXP kernel. Thanks, though! Will report back.

NSDCars5 said:
Happened both times I installed CM10. I may try the FXP version, or the jjm34 version with the FXP kernel. Thanks, though! Will report back.
Click to expand...
Click to collapse
jjm34 version is for E dual only and try to flash joebonrichie's kernel with fxp.
Sent from my Xperia E dual using Tapatalk

Abadguy10 said:
jjm34 version is for E dual only and try to flash joebonrichie's kernel with fxp.
Click to expand...
Click to collapse
He has a single-SIM version too. I'm downloading FXP244 right now, will report back.

Nope, nothing. Stuck at CyanogenMod bootscreen for ages.

Choose a different FXP version then,

Problem solved! Like an idiot, I forgot to format /data and /cache.
Thanks a lot, @Abadguy10 and @fonetalker101!

NSDCars5 said:
Problem solved! Like an idiot, I forgot to format /data and /cache.
Thanks a lot, @Abadguy10 and @fonetalker101!
Click to expand...
Click to collapse
I am experiencing the same problem. Using jim34 version on a 1505 single. The FXP version caused my sim card not to be recognized.
What version does work for you now and how did you manage to eliminate the battery problem?

nylki said:
I am experiencing the same problem. Using jim34 version on a 1505 single. The FXP version caused my sim card not to be recognized.
What version does work for you now and how did you manage to eliminate the battery problem?
Click to expand...
Click to collapse
As said above, format /data and /cache before flashing the ROM. Also, try the kernel from hsr0's ROM (what this means, is that you need to download hsr0's ROM, open it with WinRAR or 7-zip, take out the boot.img, and flash it with fastboot).

NSDCars5 said:
As said above, format /data and /cache before flashing the ROM. Also, try the kernel from hsr0's ROM (what this means, is that you need to download hsr0's ROM, open it with WinRAR or 7-zip, take out the boot.img, and flash it with fastboot).
Click to expand...
Click to collapse
Thanks! Using hsr0's ROM fixed the problem (actually it is a continuation of jim34's ROM). for reference, its here:
http://forum.xda-developers.com/showthread.php?t=2518451
It works with my Xperia E single sim version.

nylki said:
Thanks! Using hsr0's ROM fixed the problem (actually it is a continuation of jim34's ROM). for reference, its here:
http://forum.xda-developers.com/showthread.php?t=2518451
It works with my Xperia E single sim version.
Click to expand...
Click to collapse
Really? My phone must be a rare one, cause hsr0's ROM doesn't work properly in my phone, but jjm34's with hsr0's kernel does. Strange ways how Android works...

NSDCars5 said:
Really? My phone must be a rare one, cause hsr0's ROM doesn't work properly in my phone, but jjm34's with hsr0's kernel does. Strange ways how Android works...
Click to expand...
Click to collapse
It does.
What i did:
0. wipe data, cache
1. flash stock rom (with flashtool, via usb) and wipe cache, data
2. reboot, shutdown
3. flash hsr0's boot.img with fastboot (via usb)
4. reboot, disconnect usb
5. flash hsr0's ZIP from the recovery boot (cm_nanhu_ds-ota-1.1.0.zip on sdcard)
6. wipe cache, data
7. reboot
8. *jumping around, because it finally works*

nylki said:
It does.
What i did:
0. wipe data, cache
1. flash stock rom (with flashtool, via usb) and wipe cache, data
2. reboot, shutdown
3. flash hsr0's boot.img with fastboot (via usb)
4. reboot, disconnect usb
5. flash hsr0's ZIP from the recovery boot (cm_nanhu_ds-ota-1.1.0.zip on sdcard)
6. wipe cache, data
7. reboot
8. *jumping around, because it finally works*
Click to expand...
Click to collapse
Can you hang up on a phone call? That's the main issue for me; I can't hang up.

NSDCars5 said:
Can you hang up on a phone call? That's the main issue for me; I can't hang up.
Click to expand...
Click to collapse
I just tested all variations of hanging up:
1. getting called -> hanging up before accepting call
2. getting called -> accepting -> hanging up
3. calling myself -> hanging up
all three work for me.

nylki said:
I just tested all variations of hanging up:
1. getting called -> hanging up before accepting call
2. getting called -> accepting -> hanging up
3. calling myself -> hanging up
all three work for me.
Click to expand...
Click to collapse
Well, luck you. None of the three work for me.

Hangin up problem
NSDCars5 said:
Can you hang up on a phone call? That's the main issue for me; I can't hang up.
Click to expand...
Click to collapse
I also experienced same problem.
Flash the kernel again.
and then flash "nanhu-CM10DS-0.8.1.36-ota.zip" find on xda site.
It worked for me..

Aakm said:
I also experienced same problem.
Flash the kernel again.
and then flash "nanhu-CM10DS-0.8.1.36-ota.zip" find on xda site.
It worked for me..
Click to expand...
Click to collapse
Had the solution for a while now, thanks.
Also, if you're using hsr0's kernel, check out Hades kernel in Android development section - it's got overclock to 1.5 Ghz.

CM10 100% Battery fix for sony Experia E Single Sim
NSDCars5 said:
Hey. I have this Xperia E C1504 (currently using C1505 stock). I installed CM10 on it some time ago, and I noticed that the battery level was stuck at 100%. This even caused the battery to be used beyond capacity and I had to get my phone fixed at the Sony service center (I relocked the bootloader for the trip).
Why did this happen? Why was the battery stuck at 100%? Anybody? The ROM I used is this one: http://forum.xda-developers.com/showthread.php?t=2330638
EDIT: Forgot to mention this, but the battery works awesomely in stock.
Click to expand...
Click to collapse
Flash this CM10BatteryFix.img file using fastboot from ADB or any other Application.
It will fix ur 100% battery status issue.
Download from here: http://www21.zippyshare.com/v/56005129/file.html
enjoyyyy!! :good:

Guide: Installing Kernels/Roms on Xperia L (Unlocked Bootloader only)

Hey there guys, this thread is noob friendly and is made especially for those of you who just got their first Sony phone and decided to flash a custom kernel or rom.
I am not responsible for anything that happens to your phone, use this tutorial at your own risk.
Things you'll need:
- Xperia L with Unlocked Bootloader(ofcourse haha) Look here on how to unlock your bootloader.
- Flashtool
Installing a kernel (This tutorial is for 4.2.2 only, that is 15.3.A.0.26+)
1. Download phantom kernel from here (both Phantom_modules.zip and the boot.img) Place the "Phantom_modules.zip" into your phone (sd card or internal storage) Or you can use any other kernel's boot.img
2. After installing flashtool, or if you already have it installed, open it and click on the Flash icon (the first icon from the left)
4. When it asks you to choose a bootmode, select fastboot mode and press ok.
5. After all this has done turn of your phone (Xperia L).
6. Get out your usb cable and plug it into your computer while holding the "volume up" button. (notice your phone will glow blue below, this means that it is in fastboot mode.)
7. On the pop up window where it says "By Doomlord", choose "select kernel to flash". Locate your boot.img file that you just downloaded a while ago and select it.(Notice if the boot.img file is not showing up in the file menu, on the right cornor make sure the file type is set as "*.img")
8. Be patient and wait till the kernel has been flashed, should take no longer than 10 seconds.
9. Now select "Reboot device into system" and wait for your phone to power on, now once it's powered on without any problems turn it off. Now turn on your phone and wait for a purple glow then hold down the "volume down"button. Now you'll be in CWM (clock work recovery mod) Once you're here select install from zip. Locate your "phantom_modules.zip"(or the zip file, of your kernel choice) and select yes. Wait for it to be flashed and then go back and, reboot sytem.
10. From here you can flash any kernel/rom via CWM, like Thunderzap or civic. Just boot into cwm, select install from zip and locate your kernel zip file and hit install.
Credits:
- Kernel Owners.
- Sony for their kernel source
Hit thanks if this helped you out.

I don't think that's needed to be Phantom Kernel, or any other in specific, since the kernel provide a recovery with the possibility to flash a zip, it's ok (correct if I'm wrong).
I had unlocked my bootloader, then flashed the boot.img inside of the flashable zip from ThunderZap, then, rebooted to recovery right way, and flashed the entire package from ThunderZap.
Regards and thanks for the helpfull post!

Noled said:
I don't think that's needed to be Phantom Kernel, or any other in specific, since the kernel provide a recovery with the possibility to flash a zip, it's ok (correct if I'm wrong).
I had unlocked my bootloader, then flashed the boot.img inside of the flashable zip from ThunderZap, then, rebooted to recovery right way, and flashed the entire package from ThunderZap.
Regards and thanks for the helpfull post!
Click to expand...
Click to collapse
No probs
Well it was the first kernel for 4.2.2 and that's why I put it up instead. I know we can use the boot.img from thunderzap too but if I'm not specific enough most of the noobs wont understand. I also chose that kernel because it comes with a recovery so then you can just flash other kernels via cwm.

Complicated - with properly installed drivers you can start flashtool with usb-cable plugged in. After clicking the flash icon choose "Reboot into fastboot mode (via ADB)".
When the phone is in fastboot mode (blue led) choose "Select kernel to flash". No need to turn off the phone and play with cable and vol-down button...
...

R.A.B said:
Complicated - with properly installed drivers you can start flashtool with usb-cable plugged in. After clicking the flash icon choose "Reboot into fastboot mode (via ADB)".
When the phone is in fastboot mode (blue led) choose "Select kernel to flash". No need to turn off the phone and play with cable and vol-down button...
...
Click to expand...
Click to collapse
This tutorial seems pretty fine to me, so it doesn't matter
Sent from my C2104 using xda app-developers app

my flashtool exe is not detecting the .img file why?

delacruzivancarlo25 said:
my flashtool exe is not detecting the .img file why?
Click to expand...
Click to collapse
You can changed the *sin file to *img file

faizalotai said:
You can changed the *sin file to *img file
Click to expand...
Click to collapse
thanks

Sorry for noob question, but in step 9, can I skip the flashing "phantom_modules.zip" part and keep the stock kernel?
-----
Ignore this. I thought it was CWM only. I should have researched more before installing this. But I installed it and it is working good.

Xperia L 4.2.2 c105 15.3.A.1.14
Does this work with build. Umber 15.3.A.1.14 ???

MikeL. said:
Does this work with build. Umber 15.3.A.1.14 ???
Click to expand...
Click to collapse
Yes!

Thank you very much for this useful guide.
But I' ve two things to say:
1_If I didn't flash the phantom kernel can I flash a custom ROM.
2_Please the link for boot.IMG is not working they don't find the file could give me a working link.
And thank you very very much.

n78 shadow said:
Thank you very much for this useful guide.
But I' ve two things to say:
1_If I didn't flash the phantom kernel can I flash a custom ROM.
2_Please the link for boot.IMG is not working they don't find the file could give me a working link.
And thank you very very much.
Click to expand...
Click to collapse
try this to get a working recovery
http://forum.xda-developers.com/showthread.php?p=60943487
Sent from my C2105 using XDA Free mobile app

I have unlocked my bootloader via fastboot and its OKAY....also I installed custom recovery using fastboot, but I got bootlooop and I can even boot in recovery, please help me?????

richard el renthlei said:
I have unlocked my bootloader via fastboot and its OKAY....also I installed custom recovery using fastboot, but I got bootlooop and I can even boot in recovery, please help me?????
Click to expand...
Click to collapse
Return to stock and try again. There's a guide to flash stock rom here somewhere. You can search for it.
Sent from my C2104 using XDA Free mobile app

Joel16 said:
Return to stock and try again. There's a guide to flash stock rom here somewhere. You can search for it.
Sent from my C2104 using XDA Free mobile app
Click to expand...
Click to collapse
Yeah ur right, why do i need all the way to go back to stock to flash custom recovery? I had wifi problem in every rom i flash?

richard el renthlei said:
Yeah ur right, why do i need all the way to go back to stock to flash custom recovery? I had wifi problem in every rom i flash?
Click to expand...
Click to collapse
Flash any (4.2.2) stock rom and try again. That's why your WiFi probably isn't working. Either that or you didn't flash the kernel zip file (ex thunderzap4.1.zip) after fast booting the kernel img.
Sent from my C2104 using XDA Free mobile app

WiFi now working
I am also facing the same issue where wifi is not working on any Rom. So after following the steps mentioned earlier. What exactly should be done like boot to recovery then flash gapps and then reboot. Once booted flash boot.img from the Rom and then boot to recovery to flash the full kernal zip package..?

ramkumar2000 said:
I am also facing the same issue where wifi is not working on any Rom. So after following the steps mentioned earlier. What exactly should be done like boot to recovery then flash gapps and then reboot. Once booted flash boot.img from the Rom and then boot to recovery to flash the full kernal zip package..?
Click to expand...
Click to collapse
See joels answer for details look at the post you opened
Sent from my Xperia T using XDA Free mobile app

I have a HUGE problem. Please help me ASAP!
I just flashed my Xperia L to CM 12.1. I was already on CM 12 before. So I went into recovery, wiped everything and installed the new ROM from zip. Everything worked fine except for the network signal. I was getting no network signal at all. So, when I rebooted the phone, I saw that the ThunderZap kernel was also removed. I tried to flash the kernel using flashtool, but this particular variant has 2 .img files (bootlp and bootkk). I flashed them both using the FlashtTool. Now, when I reboot my phone, all I see is the ThunderZap logo. Please help me ASAP, as this is my only primary driver phone.

[Q] install firmware via fastboot mode

Hi community,
A few days ago, I suchsessfully rooted my Xperia L. After that, I made a few little changes (full Titanium backup [just in case], uninstalled some bloatware etc...). Then I wanted to reboot the device. But when i try to boot again after shutdown, it never finishes this process. It stucks at the boot animation with the colurd fogs forever (stopped it after 8 hours). Boot in to Fastboot Mode is still possibe.
So now I just want to install a clean frmware to fix this.
1. Where can I find an official ROM and could there be complications with flashtool?
(2. Are there any Custom ROMs? I thought about CyanogenMod, there are some tutorials, but on freexperiaproject xpera l isn't supported?!)
Thanks

Your device is in bootloop , So you will need to download a ftf firmware and flashtool and then flash the firmware .. There is one thread for firmwares in xda , download from it
Sent from my C2105 using XDA Premium 4 mobile app

Official Stock ROM:
http://forum.xda-developers.com/showthread.php?t=2397275

Fastboot, Flashtool. Just got a little bit confused.
Anyway: Thanks for both replies!
Is there a difference between C2104 and c2105? And why is this >700 mb? Android 2.3 was ~100mb...

Myxir said:
Fastboot, Flashtool. Just got a little bit confused.
Anyway: Thanks for both replies!
Is there a difference between C2104 and c2105? And why is this >700 mb? Android 2.3 was ~100mb...
Click to expand...
Click to collapse
2104 & 2105 doesn't really matter..
It's just the radio frequencies that the devices support.
Please hit the THANKS BUTTON instead of saying. It means a lot for us! [emoji4]

StaticBlaze said:
2104 & 2105 doesn't really matter..
It's just the radio frequencies that the devices support.
Please hit the THANKS BUTTON instead of saying. It means a lot for us! [emoji4]
Click to expand...
Click to collapse
Haha no problem
Okay. So I'll download this and try to flash...

Myxir said:
Haha no problem
Okay. So I'll download this and try to flash...
Click to expand...
Click to collapse
Good luck! [emoji4]

Soo... I've got problems with the drivers.
All drivers should be installed. But it doesn't work and I'm unable to install them. Any idea how to fix this?

Connect your device, go to device manager and uninstall any drivers related to your device, reboot and try again installing the drivers.
Also make sure your device isn't connected while installing drivers and try running with administrator rights!

I recommend: AOSPA Legacy 4.4-Final

I tried it now on my Netbook/Win 7 starter. All drivers installed successfully and device is connected in fastboot mode. I don't now why Windows 8.1. refuses the drivers...
@vmfj90: Thanks. But why?
(btw: theres no flashable zip yet. And Im unable to boot into cwm recovery or so)

So I flashed the C2104_15.3.A.1.12_India.ftf. [How long does the boot process should last?]
Worked.

Myxir said:
I tried it now on my Netbook/Win 7 starter. All drivers installed successfully and device is connected in fastboot mode. I don't now why Windows 8.1. refuses the drivers...
@vmfj90: Thanks. But why?
(btw: theres no flashable zip yet. And Im unable to boot into cwm recovery or so)
Click to expand...
Click to collapse
Windows 8.1 refuses the drivers because of Driver Signature Enforcement!
It's for security!
You should disable it before installing the driver!
Here, is a guide on how to disable [email protected]
http://www.howtogeek.com/167723/how-to-disable-driver-signature-verification-on-64-bit-windows-8.1-so-that-you-can-install-unsigned-drivers/

error flashing. aborted flashing stock FTF on Xperia L

Hello guys. I have this ERROR when i try to flash the stock FTF file on xperia L. The ftf is 100% okay because i had flash it before months and it worked fine. I do the same steps like i did before and i get this ERROR.. everything i searched on internet it fails, the problem stills there. Im not developer but i know a lot about roms etc. so things like did you enabled usb debugging or unknown sources etc. i have checked them. I have done everything i found on the internet. No solution. Please help!! thank you

Which flashtool version? I had the same problem on 19.10. Try on 19.8. Latest vesion has problem with flashing ftf for me.

Wuzimu said:
Which flashtool version? I had the same problem on 19.10. Try on 19.8. Latest vesion has problem with flashing ftf for me.
Click to expand...
Click to collapse
Thank you for your answer. I uninstalled 19.10 and installed 19.8 .. tried again but same problem.

dito7711 said:
Hello guys. I have this ERROR when i try to flash the stock FTF file on xperia L. The ftf is 100% okay because i had flash it before months and it worked fine. I do the same steps like i did before and i get this ERROR.. everything i searched on internet it fails, the problem stills there. Im not developer but i know a lot about roms etc. so things like did you enabled usb debugging or unknown sources etc. i have checked them. I have done everything i found on the internet. No solution. Please help!! thank you
Click to expand...
Click to collapse
Provide a log

Maybe you install CM 12.1 Nightlies or other CM rom and then you tried to back stock ftf? Am I right?

I hv same problem, from cm to stock
Edit: i just reinstall Flashtool to older version 0.9.11.0 , and now it work

right..this causes the problem?

Same thing for me here, when Unlocking the bootloader, I had a bootloop, so I had to flash my device with Flashtool (0.9.19.8) with the same FTF file, worked normally. ( Xperia L C2105).
I flashed my devices on CM13 ( Resurrection Remix Marshmallow), everything worked fine.
2 days later, I wanted to go back to the Stock ROM using Flashtool ==> ERROR... flashing. aborted.
On the internet, they basically talk about drivers problem or flashtool version ..... nothing worked for me.
A serious help is needed here.
EDIT: I used the 0.9.11.0 and it worked for me too.

It worked !!!!
Tj.Agung said:
I hv same problem, from cm to stock
Edit: i just reinstall Flashtool to older version 0.9.11.0 , and now it work
Click to expand...
Click to collapse
Know what my friend ? it worked fine for me too, I tried a million version before, no success ! anuway, BIG THANKS man !!

Just CM is ****ing ****. Yes many people will say this is very good rom etc., but really...

so can someone give a solution to this? :/ im really stuck on this. i want to install the stock rom

Can't detect my sim card after flashing stock rom via 0.9.20 and via 0.9.11,any help please.

Here are the screenshoots. Common guys noone can give solution to this? im searching 5 months about it

Yotov said:
Maybe you install CM 12.1 Nightlies or other CM rom and then you tried to back stock ftf? Am I right?
Click to expand...
Click to collapse
i have the same problem and you are right after flashing cm 12.1 i am having problem flashing the stock rom

Flashing the stock using latest flashtool worked for me.
I was having an old version on my computer and had used it many times to flash stock. It used to work fine without any issues.
Lately, I installed CM 12.1 but was having issues with it. When I tried to flash stock using the same flashtool version, somehow it didn't work anymore. I knew ftf file was fine, because I've successfully flashed it before.So I removed the old flashtool and installed the latest version.Installed all drivers again. First time, it didn't work. But after restarting the computer and on running it again, flashing was successful. I think a restart of the system is necessary for the drivers to install properly. So if your flashtool didn't work the first time, a restart may do the trick.Make sure you do a restart before trying another version.
Sent from my C2104 using XDA-Developers mobile app

Anjali Sankar said:
Flashing the stock using latest flashtool worked for me.
I was having an old version on my computer and had used it many times to flash stock. It used to work fine without any issues.
Lately, I installed CM 12.1 but was having issues with it. When I tried to flash stock using the same flashtool version, somehow it didn't work anymore. I knew ftf file was fine, because I've successfully flashed it before.So I removed the old flashtool and installed the latest version.Installed all drivers again. First time, it didn't work. But after restarting the computer and on running it again, flashing was successful. I think a restart of the system is necessary for the drivers to install properly. So if your flashtool didn't work the first time, a restart may do the trick.Make sure you do a restart before trying another version.
Sent from my C2104 using XDA-Developers mobile app
Click to expand...
Click to collapse
did you in windows test mode?