I have a Nexus S and currently have Firefox OS running (Boot2Gecko 1.1.0hd-prerelease), I am having the following problems
1. Can't update the OS from the Check for Updates option in Settings. It always fails when I check for updates with a message that says "There was an Error Checking for Updates"
2. If I reboot my phone into the bootloader and select recovery, I get a picture of the android logo with a Red Triangle with an Exclamation mark. The phone shows this logo and reboots by itself into Firefox
I need help in removing Firefox and getting back to Android.
Please help me
Cheers
Aquib
Related
Trying to update Canadian Xoom with 3.1 (it is available ota) however,
The update downloads, the devices reboots, the recovery mode starts, a progress bar progresses (goes about 30%), then android logo with exclamation mark stays on for some time, the device reboots and a message pops up: "Update Failed".
It reboots to 3.0.1
I have also tried doing this after a factory reset from the settings menu.
Edit: not rooted stock 3.0.1
tfx1 said:
Trying to update Canadian Xoom with 3.1 (it is available ota) however,
The update downloads, the devices reboots, the recovery mode starts, a progress bar progresses (goes about 30%), then android logo with exclamation mark stays on for some time, the device reboots and a message pops up: "Update Failed".
It reboots to 3.0.1
I have also tried doing this after a factory reset from the settings menu.
Click to expand...
Click to collapse
Are you rooted?
Hi
i recently bricked my phone while updating from stock to phils cwm recovery and my cable unplugged. After that my phone went just dead. I read on the internet and used a OMAP flash and after that i could access my download mode, but it has a yellow exclamation mark triangle and has the android mascot with a 0 in it. I dont know what that means.
Now i some how managed to put a stock rom in it (Gingerbread). But it never switches on. I keep getting a blank screen, not even the samsung bot load symbol comes up. But when ever i use a pit file to just repartition the device my phone starts up and the gingerbread os switches on. But it keeps flashing that every process of google is being forced close, so i cant even move ahead. its just stuck there, and error keeps coming up with force close pop up.
If i try to restart the device it gets the blank screen again. it works again if i repartition it.
i even tried nand flash, but it gets stuck in odin after the message Erase.....
i tried adding a new recovery to no avail. Neither does a new Android OS gets pushed in, gets stuck at NAND write start.
The phone doesnt let me access recovery also. It gets the same blank screen when i try.
help please
cibrotron said:
Hi
i recently bricked my phone while updating from stock to phils cwm recovery and my cable unplugged. After that my phone went just dead. I read on the internet and used a OMAP flash and after that i could access my download mode, but it has a yellow exclamation mark triangle and has the android mascot with a 0 in it. I dont know what that means.
Now i some how managed to put a stock rom in it (Gingerbread). But it never switches on. I keep getting a blank screen, not even the samsung bot load symbol comes up. But when ever i use a pit file to just repartition the device my phone starts up and the gingerbread os switches on. But it keeps flashing that every process of google is being forced close, so i cant even move ahead. its just stuck there, and error keeps coming up with force close pop up.
If i try to restart the device it gets the blank screen again. it works again if i repartition it.
i even tried nand flash, but it gets stuck in odin after the message Erase.....
i tried adding a new recovery to no avail. Neither does a new Android OS gets pushed in, gets stuck at NAND write start.
The phone doesnt let me access recovery also. It gets the same blank screen when i try.
help please
Click to expand...
Click to collapse
Hmm ... after flashing a custom (PhilZ-cwm) recovery, the yellow triangle shows that you are no longer on official/stock firmware.
You can reset it with TriangleAway app from Chainfire.
If download mode still works, you can try to flash another (custom) kernel with a custom recovery. But it has to be a kernel which is compatible with your current ROM.
For further questions, please post in the Galaxy SII GT-I9100 G Q&A thread.
If you have issues with your download mode, check the [GUIDE] Fix an unflashable or soft bricked I9100G thread.
Thread closed ... thank you !
Hello XDA!
This morning, I attempted to flash Cyanogenmod 12 (CM12) onto my Google Nexus 6 using this youtube tutorial that I cannot link in this post, because I am a new member. The title of the video is "How to install CyanogenMod 12 Official Lollipop on the Nexus 6" It can be found on youtube.
Whenever I boot up the phone, it shows the "Google" screen. then the Cyanogenmod boot animation appears. A white popup shows up saying "Android is Starting Up. Finishing Boot" The entire screen then comes to life with cyanogen's default background. Finally, an error message consumes the screen saying "ENCRYPTION UNSUCCESSFUL. Encryption was interrupted and can't complete. As a result, the data on your phone is no longer accessible. To resume using your phone, we need to preform a factory reset. When you restore your phone after the reset, you'll have an opportunity to restore any data that was backed up to your google account." The only button shown on the screen says "RESET PHONE". If clicked, the phone reboots, but before it can boot it gets stuck loading the TWRP Recovery application. What happens is, it'll show the TWRP logo, then the screen will turn off, then it'll show the TWRP logo again, then this loop will repeat endlessly. The only thing that I could do was reboot the phone into the boot loader by holding down the power button, and the volume down button. From here, I attempted to boot into recovery mode. The same thing happens, the TWRP screen loads, then disappears, and that just repeats itself endlessly. I also tried to preform a factory reset, but that didn't work.
As you can see, I really need some help.
The encryption failing may be caused because I came off of a custom ROM where I had the phone's encryption disabled.
THANK YOU VERY MUCH, and if I can provide any information, please ask.
Nexus 5 crashes while installing Android 6 update n shows "no command" dead android
Day before yesterday I got update notification for Android 6. I downloaded it and it showed it would take 45mins to complete installation. But than the system updation went for more than 2hrs so out of worry I tired pressing volume buttons and see if it reacts and all of sudden it showed me error msg n than a dead andriod with read exclamation mark and says "No command" .
Than after googling various sites I tired getting into recovery mode and clear partion cache files and also I did factory reset in recovery mode twice since yesterday but it's not fixing and again it shows same no command when I reboot mt nexus 5. Please hepp what should I do to fix it ???
Hi
Thanks for using XDA Assist
Try flashing the factory images as explained here: http://forum.xda-developers.com/google-nexus-5/general/tutorial-how-to-flash-factory-image-t2513701
Good luck.
So i got this problem after i tried to update (OTA) from 4.2.2 to 4.4.2
it started updating and i could see the android logo with the loading bar going on however
at the end of the update installation process it said Error underneath the logo and nothing else happend
i tried to restart the tablet but stopped at the lenovo logo just being stuck there after that i tried to hard reset it
however no succes then i went to look online on how to flash it back to its stock rom but with the SP Flashtool i always
get the C++ error when loading in the scatter file :/
So my question ... what am i doing wrong or is there something else you guys might know of?