Related
When the ota hit my droid 2, I couldn't update because I deleted all those stupid apps like vznav, blockbuster, amazon mp3, etc and couldn't upgrade without reverting my cell to stock. I hear that if you have a rooted droid 2 with just some rooted apps and haven't deleted anything, you can use the ota or skip reinstalling 2.2.20.
I understand this is a common issue right now so here is how I did it successfully.
First Download these files as they are ABSOLUTELY necessary.
Motorola drivers for omap 3630
RSD lite 4.7 & patch (4.8 and 4.9 didnt detect the device on my pc)
2.2.20 firmware (stock at launch)
2.3.20 firmware (latest)
2. Install RSDLite by double clicking the RSD Lite.msi file you just downloaded.
3. Once RSD Lite is installed, copy the pst_flash.ini file you downloaded with the RSD Lite install file and paste it into C:\Program Files (x86)\Motorola\RSD Lite OR C:\Program Files\Motorola\RSD Lite depending on where your computer put it when installing. Allow it to overwrite the existing pst_flash.ini file.
3. Unzip the drivers folder you downloaded (32 bit OR 64 bit), then double click the Motorola Consumer Driver Installer application and install the drivers.
4. Plug in your phone to the computer via USB cable and pull down the notification bar and choose USB connection as PC Mode.
5. Open the RSDLite program by right clicking it and selecting Run As Administrator.
6. Click on the “…” button next to the filename box and select the DROID2_X6_2.2.20_SHADOW_BP_C_01.09.05P_P2_USERBLD_SECURE.sbf file you downloaded earlier.
7. Once it is selected, hit Start and wait for it to finish flashing the phone.
8. Once it is done, click on the “…” button next to the filename box again and this time select the BL_D235_cdma_droid2_Consumer_replacer_HSPart.sbf file you downloaded earlier.
9. Once it is selected, hit Start and wait for it to finish flashing the phone.
10. Once both have been flashed, your are back to the stock Android 2.2 firmware.
11. Load in recovery mode and reset to factory default.
You can either upgrade now over the air or you can load the sbf for 2.3.20.
1. Plug in your phone to the computer via USB cable and pull down the notification bar and choose USB connection as PC Mode.
2. Open the RSDLite program by right clicking it and selecting Run As Administrator.
3. Click on the “…” button next to the filename box and select the VRZ_A955_2.3.20_1FF_01.sbf file you downloaded earlier.
4. Once it is selected, hit Start and wait for it to finish flashing the phone.
5. Bam you have 2.3.20, now you can do a recovery factory reset and do your thing.
From what I have seen on the web, you can't use this sbf if you installed the OTA cause it will brick your phone but you can reflash this sbf if you upgraded using this sbf.
I do not know if you can just take your rooted phone with deleted apps and flash the 2.3.20 over your current 2.2.20. I do know the process I used worked without a hitch.
Edit: Hey guys, after the patch I noticed bad battery life and my battery monitor wouldn't open. Apparently you will need to boot into recovery and wipe the cache partition. All the links work.
Thanks for taking the time to write this up ! Much appreciated =)
Sent from my DROID2 using Tapatalk
so does this mean if i'm on 2.3.20 and want to go back to stock( and reflash to 2.3.20 is impossible??.... I'm doing this because i went directly from fission 1.2.1(stock band) to 2.3.20 and just want to make sure whether i have the latest kernels
This isn't entirely correct. If you use the 2.3.20 FULL FLASH SBF, you do not need to restore back to 2.2.20, or reinstall any missing applications. The full flash is the entire stock sytem, as well as the bootloader and the kernel. So you can start from any D2 on any previous firmware with any modifications (removing apps, installing custom ROMs, etc) and if you hook it up to RSD and use the most recent full flash it will restore you back to stock on the newest kernel/baseband and restore all missing applications, everything. The full stock flash will take you back to stock regardless of the state of your D2, including if it is bricked and stuck at bootloader. The extra steps are not needed
Also, RSD 4.8 and 4.9 do work, provided you have the latest motorola moto connect drivers installed. If you are having connection issues with RSD put the phone in bootloader mode (not recovery) before you connect it to the PC.
You were correct in stating that you can not receive or apply the OTA by itself without having the original system with all pre-installed apps intact.
is there a way to go from 2.3 to 2.2, like the original kernel and radio, baseband that most people were running like a month ago. im trying to sbf form 2.3 to the older one and i keep getting errors is there any way i can go back?
Not currently. The bootloader has been updated and will no longer accept the old kernel.
Sent from my DROID2 using XDA App
zibrah3ed said:
Not currently. The bootloader has been updated and will no longer accept the old kernel.
Sent from my DROID2 using XDA App
Click to expand...
Click to collapse
Thanks for the reply. now i can stop trying lol, it was driving me crazy.
bladearronwey said:
This isn't entirely correct. If you use the 2.3.20 FULL FLASH SBF, you do not need to restore back to 2.2.20, or reinstall any missing applications. The full flash is the entire stock sytem, as well as the bootloader and the kernel. So you can start from any D2 on any previous firmware with any modifications (removing apps, installing custom ROMs, etc) and if you hook it up to RSD and use the most recent full flash it will restore you back to stock on the newest kernel/baseband and restore all missing applications, everything. The full stock flash will take you back to stock regardless of the state of your D2, including if it is bricked and stuck at bootloader. The extra steps are not needed
Also, RSD 4.8 and 4.9 do work, provided you have the latest motorola moto connect drivers installed. If you are having connection issues with RSD put the phone in bootloader mode (not recovery) before you connect it to the PC.
You were correct in stating that you can not receive or apply the OTA by itself without having the original system with all pre-installed apps intact.
Click to expand...
Click to collapse
I gotcha, well it works exactly as stated so it was safe and is safe to do it the way I flashed. I will edit the sticky though to remove irrelevant info. Also reflashing the 2.3.20 sbf after flashing once yielded no errors. I'll edit the op.
Well I ran into big problems. I had 2.2.20 and wanted to sbf to 2.3.2 and it worked all the way up to downloading ram to bootloader and froze and got stuck and I sbfd back to 2.2.20 with no errors. Now my phone says the system is 2.3.2 but the baseband is still .05 and I tired to flash sbf to 2.2.0 today and I got the same downloading ram to bootloader and now I can't get even 2.2.20 to run on the phone. With this being said I got stuck on the bootloader screen(told me there were some errors and battery okay and plug in usb) so I figured id try to sbf to 2.3.2 and it came up with the same error of "downloading ram to bootloader and froze" and the phone restarted but now the M showed back up and is running normal now with the system 2.3.2 but still old baseband so idk what went wrong and why it wont let me get past downloading ram to bootloader. What's wrong because I've tried several times now and I just want the new baseband and bootloader. Please help me
Sent from my DROID2 using XDA App
you cant downgrade from 2.3.20 to 2.2.20 because of the updated bootloader. What OS are you using? What rds are you using? did you copy over the fix into the rds directory? You may have bricked your phone by tryin to downgrade =(. Have you tried loading your phone into recovery?
JonandRoid said:
Well I ran into big problems. I had 2.2.20 and wanted to sbf to 2.3.2 and it worked all the way up to downloading ram to bootloader and froze and got stuck and I sbfd back to 2.2.20 with no errors. Now my phone says the system is 2.3.2 but the baseband is still .05 and I tired to flash sbf to 2.2.0 today and I got the same downloading ram to bootloader and now I can't get even 2.2.20 to run on the phone. With this being said I got stuck on the bootloader screen(told me there were some errors and battery okay and plug in usb) so I figured id try to sbf to 2.3.2 and it came up with the same error of "downloading ram to bootloader and froze" and the phone restarted but now the M showed back up and is running normal now with the system 2.3.2 but still old baseband so idk what went wrong and why it wont let me get past downloading ram to bootloader. What's wrong because I've tried several times now and I just want the new baseband and bootloader. Please help me
Sent from my DROID2 using XDA App
Click to expand...
Click to collapse
Make sure you use the FULL FLASH and not the system only file
Renegade8100 said:
you cant downgrade from 2.3.20 to 2.2.20 because of the updated bootloader. What OS are you using? What rds are you using? did you copy over the fix into the rds directory? You may have bricked your phone by tryin to downgrade =(. Have you tried loading your phone into recovery?
Click to expand...
Click to collapse
Im using RDS 4.9 there was no inf files that came with .9 so idk what you're talking about. I know 4.7 required a patch but idk if the new ones require it. I have fission 2.0.1 and my phone didn't brick because I have it up and running right now but I still don't have the new baseband mine is still .05...
Sent from my DROID2 using XDA App
JonandRoid said:
I still don't have the new baseband mine is still .05.
Click to expand...
Click to collapse
There's a tutorial on my "[TOOL] Ubuntu livecd" thread on how to update the baseband only, after flashing 2.3.2. Just go to the bottom of the OP and it will all be there. (I'd quote it but I'm on my D2 not my computer)
Sent from Newk's DROID2 using XDA App
No files
Hey thanks for the Tutorail. Looks like the 2.3 Update is no longer being hosted. Can you point me in another safe location.
ameggs said:
Hey thanks for the Tutorail. Looks like the 2.3 Update is no longer being hosted. Can you point me in another safe location.
Click to expand...
Click to collapse
This should help you out.
http://www.mydroidworld.com/forums/...rld-present-droid-2-2-3-20-triple-threat.html
ameggs said:
Hey thanks for the Tutorail. Looks like the 2.3 Update is no longer being hosted. Can you point me in another safe location.
Click to expand...
Click to collapse
The update file in my tut still works for me. Update.zip
All the links should work. I just uploaded the 2.2.20 to include the drivers and rsdlite
bladearronwey said:
Make sure you use the FULL FLASH and not the system only file
Click to expand...
Click to collapse
FYI, I did the full flash for 2.3.20 because the automatic update kept failing. Not sure why it didn't work - I had rooted the Droid2, "removed" a few annoying apps by renaming the adk and odec files to .bak. I unrooted it and tried the auto update again but it failed. Not sure what was making it fail, but rather than put all the apps back and try letting the phone do its thing, I used the method above - just using RDS Lite to flash to 2.3.20 without doing the previous steps.
It worked fine, but I had to dial *22899 to re-activate the phone afterward.
So far so good, but I'm not sure that rooting the phone and messing around with it, to the tune of a few good hours of my life, was worth a little bit of battery life, especially considering the 2.3.20 is supposed to fix the two problems I had with the Droid, namely poor battery life and email sync problems after inactivity.
thanks for the how-to! i flashed straight over from a rooted 2.2 phone to the new version as well.
i did experience force closes on the battery monitor as well, and clearing the cache did not fix that. i cleared, rebooted, and when it still didnt work, i flashed the phone once more and all is well. did not need to clear cache a second time. im a rookie still at all this, so bear with me if my reply seems obvious- or doesnt make sense.
i also had to reactivate the phone with the *# referenced above.
thanks again!
Had no problems updating from 2.2 to 2.3 using only the 2.3 SBF. Worked great and kept all other settings intact.
To fix the battery monitor force closing issue; just plug your phone into the charger while it's on! Fixed the issue right up for me!
Nexus S i9020A , completely stock, running 4.0.4
Got an OTA update the other day, went through the update, no errors, rebooted, still 4.0.4 ????
System Update shows my phone is currently up to date
It looks like the OTA update failed, but I'm not sure why or how to determine why.
Any help would be appreciated... again, my phone is stock, no custom rom, non-rooted ...
Tbalon said:
Nexus S i9020A , completely stock, running 4.0.4
Got an OTA update the other day, went through the update, no errors, rebooted, still 4.0.4 ????
System Update shows my phone is currently up to date
It looks like the OTA update failed, but I'm not sure why or how to determine why.
Any help would be appreciated... again, my phone is stock, no custom rom, non-rooted ...
Click to expand...
Click to collapse
try to flash CWM via fastboot then update via a zip file throw cwm.
if not u can get ur phone back to clean stock using adb and then u will receive again the ota and u can try to update again
Tbalon said:
System Update shows my phone is currently up to date
It looks like the OTA update failed, but I'm not sure why or how to determine why.
Any help would be appreciated... again, my phone is stock, no custom rom, non-rooted ...
Click to expand...
Click to collapse
It is not necessary to flash in order to get the OTA update again. Instructions to force another OTA update are here (basically: clear data on the Google Service Framework app, this resets the time the phone last checked for an update).
However, I'm facing the same problem and even after re-downloading the 4.1 update on my stock Nexus S, the update still fails. The phone reboots and starts to install the update then shows the dead droid with red exclamation before rebooting to 4.0.4.
I've seen other suggestions to get the device back to stock so I guess that's my next course of action (and likely yours).
Are these instructions appropriate? http://forum.xda-developers.com/showthread.php?t=1785672
I9020A needs two OTA's to get jellybean. The first OTA will make you keep 4.0.4 but will update your bootloader. This first ota, the one I think you got, is about 1MB in size. You will soon get another OTA, this one will bring you to jellybean.
Sent from my Nexus S using xda app-developers app
FirePoncho86 said:
I9020A needs two OTA's to get jellybean. The first OTA will make you keep 4.0.4 but will update your bootloader. This first ota, the one I think you got, is about 1MB in size. You will soon get another OTA, this one will bring you to jellybean.
Sent from my Nexus S using xda app-developers app
Click to expand...
Click to collapse
That is what appears to have happened. I was just confused regarding this and assumed my previous update was to 4.1.
I tried several times to "checkin" and eventually I got the update to 4.1.1 which, unlike the update I did a few days ago,
took longer ( about 10minutes ) to update. I now have 4.1.1 JRO03E , very snappy
Thanks !
No problem, man! Us I9020A's gotta stick together!
Sent from my Nexus S using xda app-developers app
I've noticed there was an update on kies this week (P3113UEBLH1), I'm not sure what it was thought.
I've tried upgrading in kies, it was stuck at 0% downloading then connection timed out.
The OTA update didn't find any updates available.
Then next morning, kies said no update available too.
So, Anyone got the update to work, and if so what changes did you notice?
The update is available for flashing with odin on samsung-updates.com , this is the 2nd 4.0.4 update. (I'm still running the old 4.0.4 (P3113UEBLG5))
I don't have it, but I can look into it...
Bibicp said:
I've noticed there was an update on kies this week (P3113UEBLH1), I'm not sure what it was thought.
I've tried upgrading in kies, it was stuck at 0% downloading then connection timed out.
The OTA update didn't find any updates available.
Then next morning, kies said no update available too.
So, Anyone got the update to work, and if so what changes did you notice?
The update is available for flashing with odin on samsung-updates.com , this is the 2nd 4.0.4 update. (I'm still running the old 4.0.4 (P3113UEBLG5))
Click to expand...
Click to collapse
My device is rooted, and the only backup I made with CWM was after I rooted, if I go to update (if my device can find it) will I:
1) Brick out and be screwed?
2) Have to flash my backup (which is rooted, so would that mean I can't update again?)
3) Be ok and keep my rooting?
4) Be ok, and lose my rooting, and have to re-root?
I realize I am kind of answering your question with a question, but I would be happy to see if I can track it down and see what changes there are, if it's safe to install.
FlynnErik said:
My device is rooted, and the only backup I made with CWM was after I rooted, if I go to update (if my device can find it) will I:
1) Brick out and be screwed?
2) Have to flash my backup (which is rooted, so would that mean I can't update again?)
3) Be ok and keep my rooting?
4) Be ok, and lose my rooting, and have to re-root?
I realize I am kind of answering your question with a question, but I would be happy to see if I can track it down and see what changes there are, if it's safe to install.
Click to expand...
Click to collapse
Try backing up your system using clockworkmod recovery first, then go to download mode, flash your firmware version (download from samfirmware or samsung-updates) and flash it with odin.
This way you're unrooted, running stock rom and stock recovery and then you can install the update.
I didn't try to install an update while rooted, but it's not recommended so don't try.
I did a back up after I rooted with CWM
Bibicp said:
Try backing up your system using clockworkmod recovery first, then go to download mode, flash your firmware version (download from samfirmware or samsung-updates) and flash it with odin.
This way you're unrooted, running stock rom and stock recovery and then you can install the update.
I didn't try to install an update while rooted, but it's not recommended so don't try.
Click to expand...
Click to collapse
So is my backup going to be rooted? Or will it be the stock? I am currently rooted stock 4.0.4.
Btw, I have found no information about the update anywhere on the net. Maybe they accidently did a push to us, and pulled it back?
Should I wipe cache, dalvik and FDR before I flash the firmware from those sites or use the backup I made already? (which I am unsure if I should even use since idk if it will be rooted or not lol)
I wasn't going to update till it was time to get JB, but this update that vanished is intriguing enough I might lol
As i know yes when you restore backup with cwm the result will be rooted also as the cwm takes image of the system when doing backup and as you when doing backup was rooted so when restore this backup you will be still rooted if you flash via odin no need to wipe cash and dalvik cash i never read anyone doing this
Even if you do this wipe no harm at all
Sent from my GT-I9100 using xda app-developers app
As mohamed selim said, but wipe your data and do a factory reset in clockworkmod (after backup)
and why will samsung pull back the update?
There's several reasons why this may happen
Bibicp said:
As mohamed selim said, but wipe your data and do a factory reset in clockworkmod (after backup)
and why will samsung pull back the update?
Click to expand...
Click to collapse
They pushed it out to the wrong devices
They pushed it out to early
They found a last minute bug and had to pull back
They are testing it, and not everyone should have gotten the option to get it.
Ok so to get things straight. If/when we go to JB I will need to download a firmware stock from one of the sites listed above, download it.
Do a backup (just to be safe of what I have now)
FDR/Wipe everything
Install the firmware using Odin
If everything looks good, re-flash CWM
Do another backup so I have a clean stock to revert back to down the road if needed.
That sum it up correctly? This way I can bookmark this thread so I don't forget lol.
**EDIT** When I use Odin to restore stock will I lose CWM? If so, what happens if something goes wrong in the Odin restore and I have a boot loop, or etc, what would be my next move since I won't have CWM to restore previous, would I be able to install it like I would if things were going ok?
Sorry for sounding like a n00b, I am still learning all about this, but I think I am getting closer to learning enough to not be a n00b lol. I only have 10 tabs open with this forum instead of 20!
FlynnErik said:
They pushed it out to the wrong devices
They pushed it out to early
They found a last minute bug and had to pull back
They are testing it, and not everyone should have gotten the option to get it.
Ok so to get things straight. If/when we go to JB I will need to download a firmware stock from one of the sites listed above, download it.
Do a backup (just to be safe of what I have now)
FDR/Wipe everything
Install the firmware using Odin
If everything looks good, re-flash CWM
Do another backup so I have a clean stock to revert back to down the road if needed.
That sum it up correctly? This way I can bookmark this thread so I don't forget lol.
**EDIT** When I use Odin to restore stock will I lose CWM? If so, what happens if something goes wrong in the Odin restore and I have a boot loop, or etc, what would be my next move since I won't have CWM to restore previous, would I be able to install it like I would if things were going ok?
Sorry for sounding like a n00b, I am still learning all about this, but I think I am getting closer to learning enough to not be a n00b lol. I only have 10 tabs open with this forum instead of 20!
Click to expand...
Click to collapse
It's not for the wrong device since it's saying P3113, and it's not jelly bean. as I've seen on samsung firmware.com it's 4.0.4.
Well, on my homescreen I put a shortcut for the software update, it still has a circle saying 'N" on it (which probably stands for new), but going in kies I don't find it, It only says it downloaded it but the firmware is up to date.
So probably either they really pulled it back, or it's a bug and they're fixing it. (I really can't wait for jelly bean)
Second, yes it will erase the CWM recovery and go back to stock recovery.
The common mistake people make to get a bootlop is not wiping data/doing a factory reset before flashing a new ROM, so you should go to recovery and do a factory reset, then go to download mode and flash the firmware with odin. If you ever get stuck in a bootloop, try pressing volume down + power key to get to download mode and re flash the ROM. if it's still stuck, try re-downloading the ROM files you downloaded, it could be corrupted.
Awesome!
Bibicp said:
It's not for the wrong device since it's saying P3113, and it's not jelly bean. as I've seen on samsung firmware.com it's 4.0.4.
Well, on my homescreen I put a shortcut for the software update, it still has a circle saying 'N" on it (which probably stands for new), but going in kies I don't find it, It only says it downloaded it but the firmware is up to date.
So probably either they really pulled it back, or it's a bug and they're fixing it. (I really can't wait for jelly bean)
Second, yes it will erase the CWM recovery and go back to stock recovery.
The common mistake people make to get a bootlop is not wiping data/doing a factory reset before flashing a new ROM, so you should go to recovery and do a factory reset, then go to download mode and flash the firmware with odin. If you ever get stuck in a bootloop, try pressing volume down + power key to get to download mode and re flash the ROM. if it's still stuck, try re-downloading the ROM files you downloaded, it could be corrupted.
Click to expand...
Click to collapse
So the one on the site even though its XAR is us? Can I ask why we have that tag? Not something like US or etc? I mean I don't care, just kinda curious since that would make it more simple to know which region gets what, at least for me it would lol.
Thank you so much for the help and the knowledge, I figured I would end up with stock recovery, which is why I wanted to make sure about what if something goes wrong.
As a side thought, where does the backup that CWM makes located? Can I copy and paste that on to my PC so I always have a back up handy? (I would sync it into the cloud). Can I flash that with odin down the road? Or is that only a CWM usable file?
Any more info on the firmware release?....Trying to download it now!
Firmware Version: P3113UEBLH1
OS: Ice Cream Sandwich
OS Version: v4.0.4
Release Date: 08-10-2012
Build Date: 08-10-2012
Changelist: 999349
Gizmo said:
Any more info on the firmware release?....Trying to download it now!
Firmware Version: P3113UEBLH1
OS: Ice Cream Sandwich
OS Version: v4.0.4
Release Date: 08-10-2012
Build Date: 08-10-2012
Changelist: 999349
Click to expand...
Click to collapse
That's all I know about it, where are you downloading it? samsung updates.com? or kies/OTA update?
Bibicp said:
That's all I know about it, where are you downloading it? samsung updates.com? or kies/OTA update?
Click to expand...
Click to collapse
I found it on some foreign site....samsung-updates.com won't let you download the P3113UEBLH1 firmware, Just the Kernel, I don't use Kies! Uploading it right now!
Gizmo said:
I found it on some foreign site....samsung-updates.com won't let you download the P3113UEBLH1 firmware, Just the Kernel, I don't use Kies! Uploading it right now!
Click to expand...
Click to collapse
Alright, tell me if you notice anything different.
Nice
good!
Im downloading it now. Ill post it when its rooted and deodexed
Bibicp said:
I've noticed there was an update on kies this week (P3113UEBLH1), I'm not sure what it was thought.
I've tried upgrading in kies, it was stuck at 0% downloading then connection timed out.
The OTA update didn't find any updates available.
Then next morning, kies said no update available too.
So, Anyone got the update to work, and if so what changes did you notice?
The update is available for flashing with odin on samsung-updates.com , this is the 2nd 4.0.4 update. (I'm still running the old 4.0.4 (P3113UEBLG5))
Click to expand...
Click to collapse
I tried updating it once with KIES and it got to a point and froze on the screen. I had to force the tablet to shut down and rebooted and the tablet was OK. Being a glutton for punishment I tried again with KIES and the LH1 update successfully updated my GT2 7 and the About screen confirms it. Directly after installing and rebooting I started getting error messages about Chrome crashing. I uninstalled Chrome browser and reinstalled it and all is well. No other problems. Do NOT really notice ANY difference at all.
The only problem I have is that NOW I have decided that I would like to root my GT2 7 and I am NOT sure the methods I see out there will work with the P3113UEBLH1 update.
Does anyone know if my GT2 7 - P3113UEBLH1 can be rooted safely??
grobin
I dont think IT is better than CM9
RomsWell said:
Im downloading it now. Ill post it when its rooted and deodexed
Click to expand...
Click to collapse
Can you please tell me what's different than the older UEBLG5 version? and btw can you upload the stock rom itself without root so I can test it? because I couldn't download :s
EDIT: I downloaded it via samsung-updates.com and flashed it with odin.
It's pretty much the same as UEBLG5 I didn't notice anything different, but I downgraded to UEBLG5 as samsung appears to have pushed back this update (UEBLH1), because when I connect the device to kies, it doesn't recognize it.
Bibicp said:
Can you please tell me what's different than the older UEBLG5 version? and btw can you upload the stock rom itself without root so I can test it? because I couldn't download :s
EDIT: I downloaded it via samsung-updates.com and flashed it with odin.
It's pretty much the same as UEBLG5 I didn't notice anything different, but I downgraded to UEBLG5 as samsung appears to have pushed back this update (UEBLH1), because when I connect the device to kies, it doesn't recognize it.
Click to expand...
Click to collapse
I think it broke wifi. Not sure what the change log says about it. If the Cam is fixed i think im just going to add it to the G5 update. And not bother posting this untill its confrimed OTA
RomsWell said:
I think it broke wifi. Not sure what the change log says about it. If the Cam is fixed i think im just going to add it to the G5 update. And not bother posting this untill its confrimed OTA
Click to expand...
Click to collapse
Sorry for the question, but what do you mean comfirmed OTA? Once kies told me about the UEBLG5 update, I couldn't install it with kies as it was lagging.
Next day I found it on the OTA update.
This one showed on kies for a day, then next day neither kies or the OTA udpates showed there was an update so it probably got pulled back?
Good evening guys!
Alright so I have this huge mess on my i535 right now where the signal for CDMA (bars) and mobile internet is just total crap.
It all started I guess when I had my phone on CM 10.2 (stable) when the signal would NEVER go past 3x. I thought that was just some error on the phone. The way I flashed the CM 10.2 was some bullcrap because I wasn't getting a certain instruction right where SuperSU/User was playing some Whack-A-Mole game where it would pop in and pop out. Because of all this bullcrap I didn't even think to use EZ Unlock to unlock the bootloader, although I think I didn't see it in the Play Store at the time and some of the Youtube videos I was watching didn't mention it. Eventually all was well though, and although 3x was slow looking back, the ROM was really stable with some minor crashing.
Earlier this past week though, I was tired and clicked away on an update to CM 10.2.1 and then another Cyanogenmod update pops up to the CM 11 snapshot. Just trying to get notifications to go away and I dirty flashed it to CM 11 by the Cyanogenmod updater and got an "Update 7" error when installing it, so I just went back into my downloads folder and re-flashed it to 10.2.1. Being in CM 10.2.1, I wasn't getting anything in terms of reception and later found out the problem was that the SIM wasn't checked under mobile networks in the settings tab, but this had resulted in my phone not getting mobile data past 1x.
Now fast forward to today and I update my CWM because of the "Update 7" error and re-flashed it to CM 11, only to find that there were times that the bars would go up to 5 and the LTE would flair up, but then it would crash down; I messed with both the Global LTE (there was a little more successes in this one in terms of the number of time LTE and better bars popped up, but didn't use it because I was scared to see if I was gonna get charged with Data Roaming) and Regular CDMA LTE (kept having 1x and bars would go up and down...), which is where it's at right now.
Okay, so then I re-flashed it to Verizon's 4.3 (finally Verizon is giving us i535 some love! right?) in an attempt to clean flash it but I had put in the VRALEC bootchain in first and softbricked me out of the recovery partition where it gave me that "Take back to Verizon store" yellow triangle warning and it was stuck for a long time at the Verizon logo until I odin'd a stock recovery 6mb tar and w00t, my phone is back, BUT I still have the same figity signals as the CM 11 and all. At this point though, my triangle count is at 4. Also in this state, my Google Play was acting hell-ish (I also got this in CM 11 too, but didn't care too much for it before); I kept getting this "Error retrieving... [RPC:S-3]" when trying to install apps and I did force stop and clear the info, but it wouldn't work. I've also gotten the RPC:S-7 too. Right now, after my mobile and signal bars being finicky as hell, it's sort of stabilized for 4 minutes (longest it's been ) to 4/5 bars with 4G LTE, but I don't know how long this will stay for.
So being very descriptive and maybe loosing some of you, here's the questions for the tl;dr for the questions.
- How can I get this reception to stabilize? It's never been this bad when my phone was stock around here. (now done with this long blob, the 1x has appeared again!)
- Any other ways on getting that RPC:S-3/S-7 in Google Play Store to go away?
- I'm planning on going to CM 11, once it gets a stable release. Kitkats are too irresistible, pun intended... Can someone please set the stone in how I should go about rooting and unlocking the bootloader? Some of the guides I used months ago were a little outdated, and I'm concerned that the old practices are over with.
Rezey said:
Good evening guys!
Alright so I have this huge mess on my i535 right now where the signal for CDMA (bars) and mobile internet is just total crap.
that the old practices are over with.
Click to expand...
Click to collapse
As I understood, you flash a stock 4.3 rom? Stock 4.3 rom locked the bootloader so no more CM11 or any custom rom for you unless you need to flash safestrap, but after this you only can flash TW custom rom. OK, now back to your issue. Since you already on factory stock rom, I would do a factory reset, the Odin a full factory 4.3 stock rom again with a PIT file and I think you should be back to normal unless CM10 is really messup your efs (a few people have this issue when flashing CM rom).
buhohitr said:
As I understood, you flash a stock 4.3 rom? Stock 4.3 rom locked the bootloader so no more CM11 or any custom rom for you unless you need to flash safestrap, but after this you only can flash TW custom rom. OK, now back to your issue. Since you already on factory stock rom, I would do a factory reset, the Odin a full factory 4.3 stock rom again with a PIT file and I think you should be back to normal unless CM10 is really messup your efs (a few people have this issue when flashing CM rom).
Click to expand...
Click to collapse
Hey, thanks for the reply!
A little update; last night I used SUA.exe with Kies drivers which re-flashed it with the factory Verizon's 4.3 and factory reset it, but now my phone will not get any sort of internet bands up and it's stuck on voice roaming which lead me to put my phone on airplane mode so that hidden charges wouldn't sneak up on me. I've even set my Mobile Network options to CDMA-LTE-EVO, but it will not get off of it.
I was just about to go onto one of the other threads and just re-root my phone, until you had told me about the locked bootloader... I'll look more into the safestrap, but this is irritating.
As with the PIT file, do I have to Odin all the VRALEC and other (I've seen a couple of odin to stock and I know rooting requires this) bootchains, to PIT file, and then 4.3? I'm not sure how that step goes... And if it did mess up my efs, what's my next step? I mean I think the i535 might be under warranty, but I'm at 4 triangle counts and I can't get those away unless if I get root permission, but I feel like having a locked bootloader might restrict me from rooting my phone, but I can be just worrying too much...
I wanna also put another update that I did flash the phone with a 16gb pit (which my phone is) file I found on another thread, but it still did not do anything. When I did use the pit file I had some security error on my phone which was in ODIN mode the first time and ODIN just kind of stood there, so then I closed it out and did again, to find that the error popped up again, but I ODIN ran through another flash. I had re-partition checked too...
I did a Wipe2 because I couldn't get the Dalvik cache cleared through Samsung's recovery partition, so I'm probably gonna get my phone rooted in the next hour and put another update because with root I'm gonna at least triangle away my phone.
Rezey said:
I wanna also put another update that I did flash the phone with a 16gb pit (which my phone is) file I found on another thread, but it still did not do anything. When I did use the pit file I had some security error on my phone which was in ODIN mode the first time and ODIN just kind of stood there, so then I closed it out and did again, to find that the error popped up again, but I ODIN ran through another flash. I had re-partition checked too...
I did a Wipe2 because I couldn't get the Dalvik cache cleared through Samsung's recovery partition, so I'm probably gonna get my phone rooted in the next hour and put another update because with root I'm gonna at least triangle away my phone.
Click to expand...
Click to collapse
You still don't under stand 4.3 rom. Once you on it the way to go back to stock rom is using full stock 4.3 and pit file. No boot chain, no once click root etc...If you want to root, you need to use saferoot. Let see if you can get back to a normal 4.3 stock with locked boot loader first. Check out this link. http://forum.xda-developers.com/showthread.php?t=2586319 . Just follow it and see if you can get back to a normal phone and there is a link on that thread for you to use saferoot to root.
buhohitr said:
You still don't under stand 4.3 rom. Once you on it the way to go back to stock rom is using full stock 4.3 and pit file. No boot chain, no once click root etc...If you want to root, you need to use saferoot. Let see if you can get back to a normal 4.3 stock with locked boot loader first. Check out this link. http://forum.xda-developers.com/showthread.php?t=2586319 . Just follow it and see if you can get back to a normal phone and there is a link on that thread for you to use saferoot to root.
Click to expand...
Click to collapse
Actually I used the Verizon utility tool from that very thread to clean root back to 4.3 and had Google Play connection error, Voice-roaming only, and no mobile data whatsoever.
I also just did saferoot on my phone and triangle'd away all my counters but yet still nothing. Did I fry my sim card? And with voice roaming always on, won't this put charges on my bill?
Alright so I have a 2013 Moto G, and basically in the past while on KitKat I've rooted my phone, given it custom recovery (TWRP), and messed around with the ROM (changed it to CM, PA and a few others and back). Now I've come to update to Lollipop and of course I need stock recovery to update my phone via OTA, and when it first prompted me to update, I had TWRP and I didn't really think, I just updated, this sent my phone into a bootloop, rebooting straight into TWRP every time I turned my phone on. Luckily I had a backup and I just restored to that and that fixed it. Recently I've been trying to fix the correct stock recovery for my phone so I can update, and I found some MotoTool AIO thing, and that changed my recovery back to KitKat stock (or so it says), now when I go into recovery it LOOKS like stock, can do everything you could normally do with stock recovery, but when I came to update it, about a quarter of the way though the update process, it errors and reboots my phone. Luckily this time my phone recognizes it has errored and just cancels the update instead of sending me into a boorloop. Any help would be greatly appreciated.
Thank you,
Tom.
tomisalunatic said:
Alright so I have a 2013 Moto G, and basically in the past while on KitKat I've rooted my phone, given it custom recovery (TWRP), and messed around with the ROM (changed it to CM, PA and a few others and back). Now I've come to update to Lollipop and of course I need stock recovery to update my phone via OTA, and when it first prompted me to update, I had TWRP and I didn't really think, I just updated, this sent my phone into a bootloop, rebooting straight into TWRP every time I turned my phone on. Luckily I had a backup and I just restored to that and that fixed it. Recently I've been trying to fix the correct stock recovery for my phone so I can update, and I found some MotoTool AIO thing, and that changed my recovery back to KitKat stock (or so it says), now when I go into recovery it LOOKS like stock, can do everything you could normally do with stock recovery, but when I came to update it, about a quarter of the way though the update process, it errors and reboots my phone. Luckily this time my phone recognizes it has errored and just cancels the update instead of sending me into a boorloop. Any help would be greatly appreciated.
Thank you,
Tom.
Click to expand...
Click to collapse
Try putting twrp back on and flashing stock Lollipop Rom. http://forum.xda-developers.com/moto-g/development/rom-stock-motorola-lollipop-rom-t3017510 You can also try aosp, cm12.1 or any other lollipop ROM.
The Lollipop OTA is very picky, I believe any modifications to the stock firmware will cause the update to fail. You will need to have a completely stock system for the OTA to install successfully. Find the correct KitKat firmware for your phone and flash it then try upgrading.
Hi.
I'm having a similar problem with te OTA being picky (topic here).
Is there a stock firmware "file map" so that we can check manually what is wrong and erase/add needed files ?
Maybe this could be done by checking a flashable stock rom ?
Thanks a lot guys.
EDIT : Found a solution here http://forum.xda-developers.com/mot...osing-apps-t2979971/post57658072#post57658072.
Worked perfectly !
OP, I am in the same situation. I did the same as you, and got the same results. Have you managed to solve it? It would be nice if you tell what you decide to do and what's the outcome. Thanks!
tomisalunatic said:
Alright so I have a 2013 Moto G, and basically in the past while on KitKat I've rooted my phone, given it custom recovery (TWRP), and messed around with the ROM (changed it to CM, PA and a few others and back). Now I've come to update to Lollipop and of course I need stock recovery to update my phone via OTA, and when it first prompted me to update, I had TWRP and I didn't really think, I just updated, this sent my phone into a bootloop, rebooting straight into TWRP every time I turned my phone on. Luckily I had a backup and I just restored to that and that fixed it. Recently I've been trying to fix the correct stock recovery for my phone so I can update, and I found some MotoTool AIO thing, and that changed my recovery back to KitKat stock (or so it says), now when I go into recovery it LOOKS like stock, can do everything you could normally do with stock recovery, but when I came to update it, about a quarter of the way though the update process, it errors and reboots my phone. Luckily this time my phone recognizes it has errored and just cancels the update instead of sending me into a boorloop. Any help would be greatly appreciated.
Thank you,
Tom.
Click to expand...
Click to collapse
Update to 5.1 success..... erm, well it's all relative
Eventually managed to update my XT1039 to 5.1 via ota.
Started with a fully charged phone and flashed 4.4.4 stock firmware (http://forum.xda-developers.com/moto-g/4g-development/xt1039-moto-g-4g-stock-firmware-kxb21-t2805619).
Once completed, powered up phone and signed into google play then updated the motorola update services app.
DO NOT install a custom recovery or root yet or the update will fail!
Start the update by going into settings/about phone/system updates.
After first boot into 5.1, do a factory reset.
To root once the upgrade is completed, download cf autoroot (http://forum.xda-developers.com/moto-g/4g-development/root-xt1039-cf-auto-root-peregrine-t2942406) and unzip to a folder on your pc. Open a command prompt and change directory to this folder. Powerup handset in bootloader mode (hold vol down while switching on), connect USB and run 'root-windows.bat' from the command prompt.
So far I'm hugely disappointed in the update as I use WiFi tethering alot and it appears to be a massive fail. I know it wasn't 100% in 4.4.4 or CM12 5.1 with both reqiuring an occasional reboot, but in 5.1, something's just not right and it's basically unusable (could it be updated radio or something?). Fortunately, USB tethering appears flawless.
Another obsrvation seems to be abscence of a + appearing in the HSPA signal indicator, I seem to be getting just the H appearing regardless.
Also no more bluetooth visibilty timeout setting.
After installing CWM 6.0.5.0, I got gliches with the display in recovery mode but it works.
Now after I have it rooted, ad free and de-bloated, fixed the power on logo and installed CWM 6.0.5.0, I'll stick with it for a while to just to see how the battery lasts.
In hindsight I should've stuck with CM12 5.1.