At the moment I have:
Android 2.3.3 on O2
Software Number: 1.19.206.2
Kernel Version: 2.6.35.10-g8db500e
Baseband Version: 47.14.35.3030H_7.47.35.17
got a stock rom which is:
Software Number: 1.13.401.1
Baseband Version: 47.14.35.3030_7.47.35.17
So radio does seem to be the same.. I am using the downgrade method but cant get it to work..
when I boot with volume down and power button, it loads the PH60IMG.zip (blue bar) and then goes to the checks PH60IMG.zip (golden bar) and then it turns back to the bootloader start screen and nothing happens..
please share your experiences, Im sure Im going somewhere wrong..
please advise guys...
Do you have S=Off? If not, it will be not possible.
Try to do S=Off by XTClip, then put ROM using RUU file.
Hello! How is the first time I am in this forum let me greet you all and apologize for the bad English.
My problem is: I own a 9003 that I belonged to a colleague of mine, and I can say that for the first samsung I'm pretty satisfied, but when I explore the phone verified that the camera locks when I step into the video mode and to return to work again I have to restart my phone to work and when I try to change between the 2 phone cameras the camera blocks again and don't work. I already tried to upgrade de camera firware and it still the same! How can I solve this problem? Help me please!
What is your ROM and firmware version? any custom Roms/kernels installed?
Skander1998 said:
What is your ROM and firmware version? any custom Roms/kernels installed?
Click to expand...
Click to collapse
How can I now that? I'm new in Android and in Samsung phones!
vclino said:
How can I now that? I'm new in Android and in Samsung phones!
Click to expand...
Click to collapse
Settings --> About phone. Look at the firmware/baseband/kernel version and the build number.
Or type *#1234# in the dialpad and tell us the info you get.
kbar1 said:
Settings --> About phone. Look at the firmware/baseband/kernel version and the build number.
Or type *#1234# in the dialpad and tell us the info you get.
Click to expand...
Click to collapse
The info I get is:
PDA: I9003XWKB1
PHONE: I9003XXKB1
CSC: I9003DBTKB2
Build Info: Fri Feb 4 13:12:25 KST 2011
kbar1 said:
Settings --> About phone. Look at the firmware/baseband/kernel version and the build number.
Or type *#1234# in the dialpad and tell us the info you get.
Click to expand...
Click to collapse
In the settings the information is:
Firmware Version: 2.2.1
Baseband version: I9003XXKB1
Kernel version: 2.6.32.9
[email protected]#1
Compilation nº : Froyo.XWKB1
vclino said:
In the settings the information is:
Firmware Version: 2.2.1
Baseband version: I9003XXKB1
Kernel version: 2.6.32.9
[email protected]#1
Compilation nº : Froyo.XWKB1
Click to expand...
Click to collapse
Flash a stock rom and update your firmware from Kies. (I know you are new, just read the sticky's)
Stick to stock roms if you want to avoid any bugs.
vclino said:
Hello! How is the first time I am in this forum let me greet you all and apologize for the bad English.
My problem is: I own a 9003 that I belonged to a colleague of mine, and I can say that for the first samsung I'm pretty satisfied, but when I explore the phone verified that the camera locks when I step into the video mode and to return to work again I have to restart my phone to work and when I try to change between the 2 phone cameras the camera blocks again and don't work. I already tried to upgrade de camera firware and it still the same! How can I solve this problem? Help me please!
Click to expand...
Click to collapse
How did you upgrade camera firmware????
full DDLF2 from here (thanks to sgatechwork)
Instructions of XXKPE (Same as full DDLF2):
1. Run Odin3 v1.85.
2. Check Re-Partition, Auto Reboot and F. Reset Time.
3. Click PIT button and select this file: latona_20110114.pit
4. Set it to download mode : Press Volume down + OK first, then hold Power button.
5. Connect USB cable and the program will detect the phone's Com number.
6. Click Start button to download the PIT file to phone.
7. After it is Done Click on Reset button.
8. Click PDA button and select this file: CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar
9. Click PHONE button and select this file: MODEM_I9003XXKPE_REV_00_CL1041909.tar
10. Click BOOTLOADER button and select this file: APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar
11. Click CSC button and select this file: GT-I9003-CSC-MULTI-OXAKPE.tar
12: You should unplug usb cable, remove battery, insert battery and bring it back to download mode.
13. Click Start button to flash these files to phone.
14. Do not touch anything till you see PASS on the program window.
15. Factory reset
16. [To fix issues that pertain] Reflash from steps 9 -15 again, No need of latona at this point.
thanks to Misledz for the instructions (original thread here).
No need to install kies, just install galaxy sl usb drivers (thanks to Zulfauzi)
Odin3 v1.85 is in the attachments.
hope I helped you
I decided to update the camera firmware. I went to the camera firmware update screen by dialing *#*#34971539#*#* I selected phone to CAM FW Write and I was prompted to update to camera firmware to version 2.0.3 it downloads up to 225/253 pieces then stops and says the update is a success, then it tells me to reboot. So I reboot and I find that the firmware was improperly installed, now it's displaying under camera firmware info
[TBEC27 :
TBEC27 :
NONE]
The rear camera is green and it's no longer working. HELP
hey @ll. i have touch screen problem, its start yesterday. i have phone from one uke.
when im going in the dial, last callings i cant switch to contacts, the screen not responde, in the dial .
i have last update, i have reset the phone to fctory, i have remove simcard , i have try *#2663# and tsp firmware udpade general..
nothing helps.
maybe someone can help me, i dont know what to do
any ideas, please. maybe someone can give me link to the update, becouse dont have premium on sammobile.
Date Country/Carrier Version PDA CSC SS PC
2017-04-20 Nordic countries 7.0 G955FXXU1AQCA G955FOXM1AQCA
can you try turning off the screen off then on again? then try what you are trying to do again.
Can someone guide me on determining the baseband from the Stock firmwares?
dial this in your phone's dialer *#1234# to get the codes!