I decided to update the camera firmware. I went to the camera firmware update screen by dialing *#*#34971539#*#* I selected phone to CAM FW Write and I was prompted to update to camera firmware to version 2.0.3 it downloads up to 225/253 pieces then stops and says the update is a success, then it tells me to reboot. So I reboot and I find that the firmware was improperly installed, now it's displaying under camera firmware info
[TBEC27 :
TBEC27 :
NONE]
The rear camera is green and it's no longer working. HELP
Related
Hello ,
I am from india and my problem is when i try to update my firmware via KIES it says "GT-I9100G' does not support initialising"
The story starts here , i was updating my cell phone firmware through phone itself via GPRS as soon as it got updated it stuck on the boot , i resolved it through some of your posts but accidentally i downloaded GT-I9100's firmware and the condition got worse it booted with some icons on the screen , i again downloaded the GTI9100G firmware and through odin i installed it on my cell , it worked but now when i try to update through KIES it says "GT-I9100G' does not support initialising " .
some details you might require :
Android Version :2.3.6
Baseband version : I9100GDDKL1
Kernel Version : 2.6.35.7 [email protected] #2
Build Number : GINGERBREAD.XWLC2
PDA : I9100GXWLC2
PHONE : I9100GDDKL1
CSC : I9100GODDKL1
Please help
Hello,
It all began when I updated my Nordic 5690 with Kies. With the April update of 2.3.6 the free scrolling in browser did not work, locked to up/down and left/right. And the G in the blue box was gone on the google search.
Anyway, I decided to roll back to 2.3.6 dec version with Odin 1.85. Flashed the single md5 file and got a fail on Arbel_CP.bin. Rebooted phone to test anyway. Worked fine now. G was back in blue box and free scrolling worked. BUT, there was no CSC in the phone when checking with *#1234# meaning no Swedish keyboard. And with no CSC Kies does not manage to get a connection so I can not update through Kies anymore.
SO I am stuck in this situation. What I would need is a separate NEE nordic CSC to flash that separately.
Anyone else got any ideas?
anyone got any idéas?
Hi!
A few months back, I installed the leaked version of the Edge lollipop fw leak on my German Note Edge, basically turning the 915FY into a 915F - which didn't trigger Knox and everything worked fine.
Now 5.0.1 is officially out in Germany (and the 5.1.1 OTA hopefully arriving relatively soon), I tried to turn the phone back to its original state. So I downloaded the 5.0.1 fw from sammobile and applied the tar to the PDA part. After a few minutes, the phone rebooted, updated the apps and the model number changed back from 915F to 915FY.
Today, it requested a security guideline update but failed during the update procedure. I had a closer look what might cause the issue. Booting into the download mode, I can see that Knox still says 0x0 (so that's good), booting into the stock recovery and it says 'multi-csc and then csc: SER' on the bottom, with SER standing for Russia.
So despite updating the PDA-part of the phone, I must still have some remains of the older firmware on it. I can remember that when I first installed the leaker version, I had several update files for the various parts of the phone, not just the PDA part.
So basically, what else do I need to install via ODIN to also turn the CSC back to Germany so the security guidelines can be updated and German OTA becomes available again?
Thanks in advance
Alex
Hi, I have my S7 edge 935F rooted and updated to Nougat with stock firmware.
Everything seems to work but the camera. After reading online I tried every suggestion from rebooting to cache and delvik clearing, factory reset, safe mode, but it does not work.
If you go to Service Mode, it does not work as well, but if I get back to 6.0.1 it works so it is not a hardware issue.
Any ideas???? Probable a system app is crashing it but don't know how to find out which one.
Thanks
I went to *#34971539# to check the camera firmware and it says null everywhere. any ideas?
Can´t upload screenshot
Hi !
Be sure that you flashed the correct firmware for your device
The NULL message shows that the camera info is not available but not that is faulty , for faulty shows FAILED
You can follow and continue the discussion here
https://forum.xda-developers.com/s7-edge/help/camera-failed-rma-t3333500
Good luck !
Already did all they say but nothing.
xanthrax said:
Hi !
Be sure that you flashed the correct firmware for your device
The NULL message shows that the camera info is not available but not that is faulty , for faulty shows FAILED
You can follow and continue the discussion here
https://forum.xda-developers.com/s7-edge/help/camera-failed-rma-t3333500
Good luck !
Click to expand...
Click to collapse
I have the Xperia XZs SOV34 Au version, and wanted to flash a Global Rom to get rid of the bloatware and generally speed up the phone...I am a noob when it comes to flashing, but somehow followed the instructions and got the Global version flashed. But the problem is that the Camera is simply not working anymore...app crashes every time and gives an error saying not working... Even third party apps don't work...after running the diagnostics it says the camera is not connected....camera was working fine before the flash... any way to fix this? Is it possible to re-flash the original SOV34 Au firmware? Any help is much appreciated!
I have same model with single SIM and using 41.3A.2.247/R1E customized BLX G8231 firmware
It seem stable except NFC, but still have a little bloatware