Related
hello
after flashing cm10 (thanks to vincom's newb guide) i'm having probs installing my previous apps.
was hoping to use TI back up to restore them but cant seem to dload it
google doesn't recognize phone anymore, tried amazon - will dload apps but not install
any suggestions?
TY
postalmarksman said:
hello
after flashing cm10 (thanks to vincom's newb guide) i'm having probs installing my previous apps.
was hoping to use TI back up to restore them but cant seem to dload it
google doesn't recognize phone anymore, tried amazon - will dload apps but not install
any suggestions?
TY
Click to expand...
Click to collapse
Honestly, unless there's something particular to CM10 you wanted, I'd download the latest CM10.1 Nightly (Or another CM based ROM), GAPPS and run with that.4.2.2 is running pretty smoothly these days. I can personally vouch for CM10.1 and Sons of Android Build 2 or 3.
mrfeuss said:
Honestly, unless there's something particular to CM10 you wanted, I'd download the latest CM10.1 Nightly (Or another CM based ROM), GAPPS and run with that.4.2.2 is running pretty smoothly these days. I can personally vouch for CM10.1 and Sons of Android Build 2 or 3.
Click to expand...
Click to collapse
ty,
hadn't heard of gapps, flashed that and at least was able to dload apps :laugh:
Hi to everybody, I'm going to update my TFT 101G from the rom stock to the custom one (I've not decided yet which) and after read many topics I started to root the device (done) and install the TWRP through the Goo Manager, I download the latest TWRP (zip file) from this topics
http://forum.xda-developers.com/showthread.php?t=2434422
give the root permits at GooManager but it doesn't recognized the zip file downloaded; what is wrong ? I tried also to change the path were the file is stored (GooManager/setting) but nothing change, I also tried to read the .BLOB file but the message of GooManager is always the same
No recoveries were found for this device
I saw many recovery on GooManager database; may I use one different ?
Thanks to everybody want to help me.
Newibe confused
Edit: I used Terminal emulator instead of Goo Manager and I resolved it; now I start to find a good kernel+ rom to install...
Glad you got it resolved.
I would recommend ShevT's KatKiss 4.3 builds for the TF101G. Look for the link in his forum signature any if his posts.
TimDuru's builds don't have native 3G support, but ShevT has figured it out and does the builds for the 3G built in.
frederuco said:
Glad you got it resolved.
I would recommend ShevT's KatKiss 4.3 builds for the TF101G. Look for the link in his forum signature any if his posts.
TimDuru's builds don't have native 3G support, but ShevT has figured it out and does the builds for the 3G built in.
Click to expand...
Click to collapse
...I just discovered that the rom installed (KatKiss-4.3.1_029) don't have support on 3G !!!
To update it, is enough to flash e new rom or I need to re-flash gapp and kernel ?
gianni_1963 said:
...I just discovered that the rom installed (KatKiss-4.3.1_029) don't have support on 3G !!!
To update it, is enough to flash e new rom or I need to re-flash gapp and kernel ?
Click to expand...
Click to collapse
Look for ShevT's posts in KatKiss to find his version with 3G support.
Then wipe the caches and system partitions.
Flash ShevT's build then the GAPPS and you should be good.
It may be necessary to wipe data too, I've never tried it as I don't have the 3G version. If you experience Random Reboots or Sleep of a Death, wipe data (uninstalls all user apps) and set it up again to see if that helps.
frederuco said:
Look for ShevT's posts in KatKiss to find his version with 3G support.
Then wipe the caches and system partitions.
Flash ShevT's build then the GAPPS and you should be good.
It may be necessary to wipe data too, I've never tried it as I don't have the 3G version. If you experience Random Reboots or Sleep of a Death, wipe data (uninstalls all user apps) and set it up again to see if that helps.
Click to expand...
Click to collapse
Thanks a lot Federuco, I'll try and I let you know.
Regards
gianni_1963 said:
Thanks a lot Federuco, I'll try and I let you know.
Regards
Click to expand...
Click to collapse
...after some days of testing, this are my comment :
very good ROM
stable, if you don't increase spped of processor
many intersting feture
GPS doesn't work (or needs hours to fix)
3G works (sim and system find it) but is not possible to navigate with the browser (KatKiss made by ShevT)
Someone can help me to find a solution at my problems ?
Thanks a lot in advance
I have a TF300T with the latest bootloader and twrp 2.6.3.1. I had been installing nightlies for CM11 and using Grimlock kernel and had zero problems until the first nightly after Snapshot M4. Ever since then, after flashing a kernel on any CM11 as soon as it reboots into android I get the message in the title line.
I have tried wiping everything and it still happens after installing a kernel. If I just install any copy of CM11 and GAPPS everything works perfectly fine. It's only when installing any of the aftermarket kernels. I even tried using the latest Philz Touch 6 and still get the same problems. I have searched on Google and find plenty of people asking for help on the same error message for different devices but nothing on how to fix it. Does anyone know what this can be?
Any help will be greatly appreciated. I like our tablet with CM11, but it is SO much better being able to overclock.
Thanks,
Rick
rickpref said:
I have a TF300T with the latest bootloader and twrp 2.6.3.1. I had been installing nightlies for CM11 and using Grimlock kernel and had zero problems until the first nightly after Snapshot M4. Ever since then, after flashing a kernel on any CM11 as soon as it reboots into android I get the message in the title line.
I have tried wiping everything and it still happens after installing a kernel. If I just install any copy of CM11 and GAPPS everything works perfectly fine. It's only when installing any of the aftermarket kernels. I even tried using the latest Philz Touch 6 and still get the same problems. I have searched on Google and find plenty of people asking for help on the same error message for different devices but nothing on how to fix it. Does anyone know what this can be?
Any help will be greatly appreciated. I like our tablet with CM11, but it is SO much better being able to overclock.
Thanks,
Rick
Click to expand...
Click to collapse
Have you tried deleting the telephone system app?
rickpref said:
I have a TF300T with the latest bootloader and twrp 2.6.3.1. I had been installing nightlies for CM11 and using Grimlock kernel and had zero problems until the first nightly after Snapshot M4. Ever since then, after flashing a kernel on any CM11 as soon as it reboots into android I get the message in the title line.
I have tried wiping everything and it still happens after installing a kernel. If I just install any copy of CM11 and GAPPS everything works perfectly fine. It's only when installing any of the aftermarket kernels. I even tried using the latest Philz Touch 6 and still get the same problems. I have searched on Google and find plenty of people asking for help on the same error message for different devices but nothing on how to fix it. Does anyone know what this can be?
Any help will be greatly appreciated. I like our tablet with CM11, but it is SO much better being able to overclock.
Thanks,
Rick
Click to expand...
Click to collapse
Free gift from Grimlock. It's the kernel that restarts 3 times before fully booting, right? As soon as I took it off my system, the problem vanished. Comes with the package. You like Grimlock, must learn to live with it. I don't like it That much.
rickpref said:
I have a TF300T with the latest bootloader and twrp 2.6.3.1. I had been installing nightlies for CM11 and using Grimlock kernel and had zero problems until the first nightly after Snapshot M4. Ever since then, after flashing a kernel on any CM11 as soon as it reboots into android I get the message in the title line.
I have tried wiping everything and it still happens after installing a kernel. If I just install any copy of CM11 and GAPPS everything works perfectly fine. It's only when installing any of the aftermarket kernels. I even tried using the latest Philz Touch 6 and still get the same problems. I have searched on Google and find plenty of people asking for help on the same error message for different devices but nothing on how to fix it. Does anyone know what this can be?
Any help will be greatly appreciated. I like our tablet with CM11, but it is SO much better being able to overclock.
Thanks,
Rick
Click to expand...
Click to collapse
Updates have come that fix that problem. Same with Geass, if it's not fixed yet it will be VERY soon.
graphdarnell said:
Free gift from Grimlock. It's the kernel that restarts 3 times before fully booting, right? As soon as I took it off my system, the problem vanished. Comes with the package. You like Grimlock, must learn to live with it. I don't like it That much.
Click to expand...
Click to collapse
Or you could file bug reports with the devs, and guess what? They found the problem and fixed it! Instead of slagging people who are trying to improve our tablets, you could help them by letting them know about the issues you have.
The "free gift" is the kernel that's posted for a community. If you don't like it and don't want to help, and would rather tell others bad things about it, then take your nonsense somewhere else.
hardslog said:
Updates have come that fix that problem. Same with Geass, if it's not fixed yet it will be VERY soon.
Or you could file bug reports with the devs, and guess what? They found the problem and fixed it! Instead of slagging people who are trying to improve our tablets, you could help them by letting them know about the issues you have.
The "free gift" is the kernel that's posted for a community. If you don't like it and don't want to help, and would rather tell others bad things about it, then take your nonsense somewhere else.
Click to expand...
Click to collapse
I upgraded to the latest TWRP 2.7.0.1, deleted everything and started from scratch. Everything works great now and using new kernel that clocks to 1.8 is flying.
[Q&A] [ROM][Unofficial][CM12.1] invisiblek's CM12.1 Unofficial Nightlies [Updated 4/
Q&A for [ROM][Unofficial][CM12.1] invisiblek's CM12.1 Unofficial Nightlies [Updated 4/9/15]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][Unofficial][CM12.1] invisiblek's CM12.1 Unofficial Nightlies [Updated 4/9/15]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
GPS?
Does the gps work on this rom?
gapps info
MC, could you provide a link to dhackers29 gapps and a little more info on deleting unwanted stuff from zip? This d2 is my DD, so I need my ducks in a row when I flash. Thanks.
Also, please reconsider this q&a bs. It's really just counter productive--that is, if you or anyone else ever even sees it.
BTW, downloaded 4/10 build with dolphin mini and it saved correctly as a zip.
darknite39 said:
Does the gps work on this rom?
Click to expand...
Click to collapse
It's working fine for me. Previously I couldn't get GPS locks on any AOSP ROM, but before switching to these builds from KitKat I flashed to Alliance ROM (stock-based TouchWiz - this is important) and got a GPS lock there. After a wipe I flashed the 4/6 build and GPS still worked.
Cool! Thank you for the tip.
Load rom from phone after wipe
Pardon my ignorance, but if i copy a rom and gapps to my phone and then do a full wipe, won't that wipe out the rom and gapps files? Is it stored in 2 different partitions, or do I put it on an external SD? I have TWRP 2.8.5, cm-12.1-20150407-UNOFFICIAL-d2vzw and gapps-L-4-15-15. Currently running cm11x.
1) Make sure you're on the latest TWRP
2) Download gapps from euroskank's site
3) Full wipe, flash ROM and gapps
Mc633 said:
Pardon my ignorance, but if i copy a rom and gapps to my phone and then do a full wipe, won't that wipe out the rom and gapps files? Is it stored in 2 different partitions, or do I put it on an external SD? I have TWRP 2.8.5, cm-12.1-20150407-UNOFFICIAL-d2vzw and gapps-L-4-15-15. Currently running cm11x.
1) Make sure you're on the latest TWRP
2) Download gapps from euroskank's site
3) Full wipe, flash ROM and gapps
Click to expand...
Click to collapse
Correct. If you put it on your internal and then wipe it the files will be gone
Sent from my Nexus 5
Advice on which version is consider to be a Stable Daily Driver
Hello everyone I'm currently using version date 4/7 however I'm having problems with Bluetooth when playing music and battery life is horrible. I'm going to try and go with 4/10 which from what I read seems to be very stable and great battery life. I simply want a good daily driver. Has anyone perform a dirty upgrade to a newer version successfully without issues. I want to perform this since it is quicker and I won't have to re-add my email exchange accounts again. How is the latest version 4/15?
Please advise,
TS
MMS and bluetooth audio (music) not working.
I'm using the lastest build 4/15 with 4/15 gapps which is running great. The only 2 problems i'm seeing is not being able to receive and send MMS and blue tooth audio isn't working properly. Are these know issues? Thank you guys for all the work that you have been doing thus far. My phone is like new again!!!
Thank you,
TS
agree textra as alternative msg app
Been using textra for about a year and like it better than stock and other apps. Would use it even if stock worked.
need to cut invisi-k a break
That's rough indeed. I for one would be fine with him doing weeklies, instead of nightlies, so dude can have time to live and work.
Latest Gaps 4/18 installation procedure.
Can I dirty install the latest gaps over our current installation or do I need to perform and clean installation of both zip files with the latest gaps? I'm currently running zips 4/15 with 4/15 gaps. Therefore can I just in recovery mode installed 4/18 gaps over the 4/15 gaps successfully without issues? Has anyone seen a big difference in the 4/18 gaps opposed to the 4/15?
Thank you,
TS
Latest Gapps 4/18 installation procedure.
Can I dirty install the latest gapps over our current installation or do I need to perform and clean installation of both zip files with the latest gapps? I'm currently running zips 4/15 with 4/15 gapps. Therefore can I just in recovery mode installed 4/18 gapps over the 4/15 gapps successfully without issues? Has anyone seen a big difference in the 4/18 gapps opposed to the 4/15?
Thank you,
TS
techysandy0504 said:
Can I dirty install the latest gaps over our current installation or do I need to perform and clean installation of both zip files with the latest gaps? I'm currently running zips 4/15 with 4/15 gaps. Therefore can I just in recovery mode installed 4/18 gaps over the 4/15 gaps successfully without issues? Has anyone seen a big difference in the 4/18 gaps opposed to the 4/15?
Thank you,
TS
Click to expand...
Click to collapse
I don't think there would be any true difference between the two gapps. I don't really see a need to update the gapps unless your updating to a newer android version. I know android 5.1.1 was released recently but I doubt the S3 could even run this version
Sent from my Nexus 5
Bluetooth (Audio) and MMS
Has anyone tested Bluetooth (Audio) and being able to send and receive MMS? Is that working successfully on the 4/19 build?
Thank you,
TS
4/22 wont boot for me!!! (Beware)
Just a heads up I just tried to install zip file 4/22 and my phone wont boot therefore I had to restore back to 4/21. I performed a full wipe before trying to install 4/22 however no luck. Yes MMS are now working on 4/21 !!!
Thanks for all the great work,
TS
I recently flashed this on my Verizon S3, however it seems that it has borked my SMS, possibly MMS (tested much less). I cannot send/receive SMS messages whatsoever. I have tried to manually set my SMSC, and have updated to the newest modem. Any ideas why this could be happening and how to fix it?
dirty flash 4/22?
anyone tried a dirty flash (I'm lazy) over 4/7? I'm stuck on "Android is starting.... starting apps". Never could get 4/15 to work. Tried dirty, clean, gapps, no gapps. Guess I'll give this an hour and then try a clean flash.
Mc633 said:
anyone tried a dirty flash (I'm lazy) over 4/7? I'm stuck on "Android is starting.... starting apps". Never could get 4/15 to work. Tried dirty, clean, gapps, no gapps. Guess I'll give this an hour and then try a clean flash.
Click to expand...
Click to collapse
I cleaned flashed 4/22 and my phone would not boot therefore I flashed 4/21 which is working well for me.
Good luck,
TS
---------- Post added at 02:18 PM ---------- Previous post was at 01:47 PM ----------
Bluetooth Audio not working using 4/21 build however I know they will get this figured out soon.
Thanks for all the great work thus far!!!
TS
Tried the 4/22 release and phone would not boot up. I got no boot animation, but eventually the Updating apps showed up. Got to the starting apps screen and after 35 minutes, nothing changed.
This was on a dirty flash. So I wiped everything and started from scratch and had the same problems. Back to 4/15 for now for me.
If the following table is correct then I have a GT-N8013. I'm running KitKat 4.4.2 on it: (N8010XXUDNE4_N8010BTUDNF1_BTU_N8013.tar.md5).
How close can one get to the latest version of Android and still have a working GT-N8013?
GT-N8000 - Wifi+3G+calling
GT-N8005 - Wifi+3G
GT-N8010 - Wifi (Except USA)
GT-N8013 - Wifi (Only USA)
GT-N8020 - Wifi+LTE
KK 4.4.2 is the last release from Samsung .
Android then see your models custom rom section .
JJEgan said:
KK 4.4.2 is the last release from Samsung .
Android then see your models custom rom section .
Click to expand...
Click to collapse
I've just picked up a used 10.1 (first edition) and am hoping to get it onto 5.1.1 or 6.01.
I see a custom CM ROM from Cyanogen, that states it's 6.0 official, but when I go to the site the release is really old for the 8013, and I'm not sure if it's been grouped in with the more recent beta group that is linked in the thread or if it's not.
I also see an older Cyanogen thread for 12, but that's pre 6.0 and appears to be somewhat abandoned.
My Note 3 is on phronesis 6.0.1, and I would like to get the Note 10.1 to as close to that as possible, without dealing with any major bugs.
Thank you for your assistance.
Some progress.
I managed to update mine to Marshmallow 6.0.1 (cm-13.0-20160523-UNOFFICIAL-n8013.zip) via CWM v6.0.3.6 but Google Apps keeps crashing.
I've tried both open_gapps-arm-6.0-nano-20160721.zip (Open GApps) and gapps-600-base-20151107-1-signed.zip. Both take hours to install and just keep crashing whenever you try to do anything.
Anyone have any luck getting cm-13.0-20160523-UNOFFICIAL-n8013.zip / and GApps.zip working?
Basil Rathbone said:
I managed to update mine to Marshmallow 6.0.1 (cm-13.0-20160523-UNOFFICIAL-n8013.zip) via CWM v6.0.3.6 but Google Apps keeps crashing.
I've tried both open_gapps-arm-6.0-nano-20160721.zip (Open GApps) and gapps-600-base-20151107-1-signed.zip. Both take hours to install and just keep crashing whenever you try to do anything.
Anyone have any luck getting cm-13.0-20160523-UNOFFICIAL-n8013.zip / and GApps.zip working?
Click to expand...
Click to collapse
I had it crashing initially too, with CM-13.
I reinstalled the ROM, root, twrp, everything. I also made sure to install the latest "Stock" Gapps, before rebooting once the ROM was in place. Since then I have not had any issues.
I did however have some issues using the nano package. Hope that helps.
Still no joy
I still can't get CM-13 to work. I use CWM. I made sure I was using the latest CWM 6.0.4.6.
I booted into CWM, factory reset and cleared cache. Flashed cm-13.0-20160523-UNOFFICIAL-n8013.zip.
I then factory reset and cleared cache again and flashed gapps-600-base-20151107-1-signed.zip.
I then factory reset and cleared cache again and rebooted.
No joy.
What actual gApps and CM-13 did you use? Maybe I need to use the same version of TWRP as you used?
I'm stumped.
--------------------------------------------------------------------------------
bladebarrier said:
I had it crashing initially too, with CM-13.
I reinstalled the ROM, root, twrp, everything. I also made sure to install the latest "Stock" Gapps, before rebooting once the ROM was in place. Since then I have not had any issues.
I did however have some issues using the nano package. Hope that helps.
Click to expand...
Click to collapse
Basil Rathbone said:
I still can't get CM-13 to work. I use CWM. I made sure I was using the latest CWM 6.0.4.6.
I booted into CWM, factory reset and cleared cache. Flashed cm-13.0-20160523-UNOFFICIAL-n8013.zip.
I then factory reset and cleared cache again and flashed gapps-600-base-20151107-1-signed.zip.
I then factory reset and cleared cache again and rebooted.
No joy.
What actual gApps and CM-13 did you use? Maybe I need to use the same version of TWRP as you used?
I'm stumped.
--------------------------------------------------------------------------------
Click to expand...
Click to collapse
I used the ARM 6.0 Stock version for CM 13. http://wiki.cyanogenmod.org/w/Google_Apps#Downloads
I ended up swapping to the 2014 model because I got a good deal on a Verizon version (which is locked but oh well), so I don't recall the TWRP that I ran. It sounds like that sometimes gives people issues.
I do recall that using the nano version of gapps was not working for me. Could be a coincidence, but I had constant crashes when I tried using it.
This is the thread I used to grab the ROM and TWRP: http://forum.xda-developers.com/galaxy-note-10-1/development/rom-lollipop-t3269375
It helps to read the installation notes properly
The problem(s) I was having were resolved by using twrp-2.8.7.0-gt-n8013 instead of N8013-CWM-Touch-6.04.6. I also used open_gapps-arm-6.0-stock-20160803 instead of nano but I really think it was TWRP that made everything work.
I'm now running cm-13.0-20160523-UNOFFICIAL-n8013 without any problems.
I consider this thread closed.
Basil Rathbone said:
If the following table is correct then I have a GT-N8013. I'm running KitKat 4.4.2 on it: (N8010XXUDNE4_N8010BTUDNF1_BTU_N8013.tar.md5).
How close can one get to the latest version of Android and still have a working GT-N8013?
GT-N8000 - Wifi+3G+calling
GT-N8005 - Wifi+3G
GT-N8010 - Wifi (Except USA)
GT-N8013 - Wifi (Only USA)
GT-N8020 - Wifi+LTE
Click to expand...
Click to collapse
How did you get KitKat on n8013. It was never released and no one successfully flashed 4.4 n8010 to n8013. Odin keeps giving an error. Please I've been trying for years now since it's been 2 years since update was released and doesn't look like it'll ever release (**** yoi Samsung with your update **** and regions)
Anyone have any luck? I've had this tablet since 2013 and I stopped using it because it has always been such a laggy sluggish experience. I thought I would try putting an AOSP ROM on it to see if that helped. Everything is so old for this device that it's nearly impossible to find the old files, ROMs, recoverys, etc. I can't even get TWRP or CWM to work on it. Maybe it's not worth the trouble anymore.
MrAwesome75 said:
Anyone have any luck? I've had this tablet since 2013 and I stopped using it because it has always been such a laggy sluggish experience. I thought I would try putting an AOSP ROM on it to see if that helped. Everything is so old for this device that it's nearly impossible to find the old files, ROMs, recoverys, etc. I can't even get TWRP or CWM to work on it. Maybe it's not worth the trouble anymore.
Click to expand...
Click to collapse
Well official only kitkat if you are international (Samsung decided not to release a lot of device updates in the us for kit kat including the s3, galaxy light, and this one). However I think you can get CM 13.1, idk about anything more recent but there is a (slightly) active community for it still left. Its a shame that this flagship tablet was neglected. I hope it doesn't happen with future Samsung ones but I've avoided buying any. I still use mine on jellybean for basic internet browsing and games
zMrAwesome75 said:
Quote:
Anyone have any luck? I've had this tablet since 2013 and I stopped using it because it has always been such a laggy sluggish experience. I thought I would try putting an AOSP ROM on it to see if that helped. Everything is so old for this device that it's nearly impossible to find the old files, ROMs, recoverys, etc. I can't even get TWRP or CWM to work on it. Maybe it's not worth the trouble anymore.
Click to expand...
Click to collapse
Not sure if you're still looking but I just installed Android Nougat v7.1.2 using the instructions provided here:
https://forum.xda-developers.com/showthread.php?t=2185119
I have a N8010 that topped out at 4.1.2. I flashed to a N8013 kernel/rom about 2 years ago which maxed out at 4.2.2 . I just recently found that link to the LineageOS build (Formerly Cyanogenmod) when I was contemplating buying a new tablet. The tablet was getting a bit sluggish so I decided to go ahead and blast it out and see what happened. I was VERY pleasantly surprised! Had some issues getting the Recovery flashed but once I did, it was pretty smooth from there. I had backed up all the apps so once I got it booted and restored all the apps, I was surprised how responsive it is. Oh, and you can say goodbye to all those SD card issues that the Note 10.1 had since this version of Android integrates the external SD with the internal SD so everything gets installed on the external card. No need for apps like folder mount, etc.
I highly recommend it. The only issue is that you lose the integrated S-Pen functionality but you can reinstall some of those apps from the play store and bring back a lot of those features. Some 3rd party apps actually work better.
Good luck!
7.1.2 on GT-N80013
I am currently running an unoffical build I picked up here on xda it is an unofficial Lineage OS build. I haven't currently found any bugs... camera works, bluetooth works, wifi works... at least for me. The build number is 14.1-20170810-unnofficial-n8013
Hannover2k said:
Not sure if you're still looking but I just installed Android Nougat v7.1.2 using the instructions provided here:
https://forum.xda-developers.com/showthread.php?t=2185119
I have a N8010 that topped out at 4.1.2. I flashed to a N8013 kernel/rom about 2 years ago which maxed out at 4.2.2 . I just recently found that link to the LineageOS build (Formerly Cyanogenmod) when I was contemplating buying a new tablet. The tablet was getting a bit sluggish so I decided to go ahead and blast it out and see what happened. I was VERY pleasantly surprised! Had some issues getting the Recovery flashed but once I did, it was pretty smooth from there. I had backed up all the apps so once I got it booted and restored all the apps, I was surprised how responsive it is. Oh, and you can say goodbye to all those SD card issues that the Note 10.1 had since this version of Android integrates the external SD with the internal SD so everything gets installed on the external card. No need for apps like folder mount, etc.
I highly recommend it. The only issue is that you lose the integrated S-Pen functionality but you can reinstall some of those apps from the play store and bring back a lot of those features. Some 3rd party apps actually work better.
Good luck!
Click to expand...
Click to collapse
I'd appreciate a link to the rom you installed. Thx.
I'm interested as well I'm still running original os. Also wondering if the rom update works well on these tablets since they are older. As Android matures the os gets bigger which can impact performance on older CPUs.
cloves said:
I'm interested as well I'm still running original os. Also wondering if the rom update works well on these tablets since they are older. As Android matures the os gets bigger which can impact performance on older CPUs.
Click to expand...
Click to collapse
I recently installed Lineage OS 14 and it is working great.
Tablet is stable, everything works, great battery life.
All devices work gps, etc...
The s-pen will not work like it did stock but there are apps you can get that seem to work better
Squid and Sketch for drawing....squid seems cool if you write with stylus
Install Magisk instead of supersu.
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445