If the following table is correct then I have a GT-N8013. I'm running KitKat 4.4.2 on it: (N8010XXUDNE4_N8010BTUDNF1_BTU_N8013.tar.md5).
How close can one get to the latest version of Android and still have a working GT-N8013?
GT-N8000 - Wifi+3G+calling
GT-N8005 - Wifi+3G
GT-N8010 - Wifi (Except USA)
GT-N8013 - Wifi (Only USA)
GT-N8020 - Wifi+LTE
KK 4.4.2 is the last release from Samsung .
Android then see your models custom rom section .
JJEgan said:
KK 4.4.2 is the last release from Samsung .
Android then see your models custom rom section .
Click to expand...
Click to collapse
I've just picked up a used 10.1 (first edition) and am hoping to get it onto 5.1.1 or 6.01.
I see a custom CM ROM from Cyanogen, that states it's 6.0 official, but when I go to the site the release is really old for the 8013, and I'm not sure if it's been grouped in with the more recent beta group that is linked in the thread or if it's not.
I also see an older Cyanogen thread for 12, but that's pre 6.0 and appears to be somewhat abandoned.
My Note 3 is on phronesis 6.0.1, and I would like to get the Note 10.1 to as close to that as possible, without dealing with any major bugs.
Thank you for your assistance.
Some progress.
I managed to update mine to Marshmallow 6.0.1 (cm-13.0-20160523-UNOFFICIAL-n8013.zip) via CWM v6.0.3.6 but Google Apps keeps crashing.
I've tried both open_gapps-arm-6.0-nano-20160721.zip (Open GApps) and gapps-600-base-20151107-1-signed.zip. Both take hours to install and just keep crashing whenever you try to do anything.
Anyone have any luck getting cm-13.0-20160523-UNOFFICIAL-n8013.zip / and GApps.zip working?
Basil Rathbone said:
I managed to update mine to Marshmallow 6.0.1 (cm-13.0-20160523-UNOFFICIAL-n8013.zip) via CWM v6.0.3.6 but Google Apps keeps crashing.
I've tried both open_gapps-arm-6.0-nano-20160721.zip (Open GApps) and gapps-600-base-20151107-1-signed.zip. Both take hours to install and just keep crashing whenever you try to do anything.
Anyone have any luck getting cm-13.0-20160523-UNOFFICIAL-n8013.zip / and GApps.zip working?
Click to expand...
Click to collapse
I had it crashing initially too, with CM-13.
I reinstalled the ROM, root, twrp, everything. I also made sure to install the latest "Stock" Gapps, before rebooting once the ROM was in place. Since then I have not had any issues.
I did however have some issues using the nano package. Hope that helps.
Still no joy
I still can't get CM-13 to work. I use CWM. I made sure I was using the latest CWM 6.0.4.6.
I booted into CWM, factory reset and cleared cache. Flashed cm-13.0-20160523-UNOFFICIAL-n8013.zip.
I then factory reset and cleared cache again and flashed gapps-600-base-20151107-1-signed.zip.
I then factory reset and cleared cache again and rebooted.
No joy.
What actual gApps and CM-13 did you use? Maybe I need to use the same version of TWRP as you used?
I'm stumped.
--------------------------------------------------------------------------------
bladebarrier said:
I had it crashing initially too, with CM-13.
I reinstalled the ROM, root, twrp, everything. I also made sure to install the latest "Stock" Gapps, before rebooting once the ROM was in place. Since then I have not had any issues.
I did however have some issues using the nano package. Hope that helps.
Click to expand...
Click to collapse
Basil Rathbone said:
I still can't get CM-13 to work. I use CWM. I made sure I was using the latest CWM 6.0.4.6.
I booted into CWM, factory reset and cleared cache. Flashed cm-13.0-20160523-UNOFFICIAL-n8013.zip.
I then factory reset and cleared cache again and flashed gapps-600-base-20151107-1-signed.zip.
I then factory reset and cleared cache again and rebooted.
No joy.
What actual gApps and CM-13 did you use? Maybe I need to use the same version of TWRP as you used?
I'm stumped.
--------------------------------------------------------------------------------
Click to expand...
Click to collapse
I used the ARM 6.0 Stock version for CM 13. http://wiki.cyanogenmod.org/w/Google_Apps#Downloads
I ended up swapping to the 2014 model because I got a good deal on a Verizon version (which is locked but oh well), so I don't recall the TWRP that I ran. It sounds like that sometimes gives people issues.
I do recall that using the nano version of gapps was not working for me. Could be a coincidence, but I had constant crashes when I tried using it.
This is the thread I used to grab the ROM and TWRP: http://forum.xda-developers.com/galaxy-note-10-1/development/rom-lollipop-t3269375
It helps to read the installation notes properly
The problem(s) I was having were resolved by using twrp-2.8.7.0-gt-n8013 instead of N8013-CWM-Touch-6.04.6. I also used open_gapps-arm-6.0-stock-20160803 instead of nano but I really think it was TWRP that made everything work.
I'm now running cm-13.0-20160523-UNOFFICIAL-n8013 without any problems.
I consider this thread closed.
Basil Rathbone said:
If the following table is correct then I have a GT-N8013. I'm running KitKat 4.4.2 on it: (N8010XXUDNE4_N8010BTUDNF1_BTU_N8013.tar.md5).
How close can one get to the latest version of Android and still have a working GT-N8013?
GT-N8000 - Wifi+3G+calling
GT-N8005 - Wifi+3G
GT-N8010 - Wifi (Except USA)
GT-N8013 - Wifi (Only USA)
GT-N8020 - Wifi+LTE
Click to expand...
Click to collapse
How did you get KitKat on n8013. It was never released and no one successfully flashed 4.4 n8010 to n8013. Odin keeps giving an error. Please I've been trying for years now since it's been 2 years since update was released and doesn't look like it'll ever release (**** yoi Samsung with your update **** and regions)
Anyone have any luck? I've had this tablet since 2013 and I stopped using it because it has always been such a laggy sluggish experience. I thought I would try putting an AOSP ROM on it to see if that helped. Everything is so old for this device that it's nearly impossible to find the old files, ROMs, recoverys, etc. I can't even get TWRP or CWM to work on it. Maybe it's not worth the trouble anymore.
MrAwesome75 said:
Anyone have any luck? I've had this tablet since 2013 and I stopped using it because it has always been such a laggy sluggish experience. I thought I would try putting an AOSP ROM on it to see if that helped. Everything is so old for this device that it's nearly impossible to find the old files, ROMs, recoverys, etc. I can't even get TWRP or CWM to work on it. Maybe it's not worth the trouble anymore.
Click to expand...
Click to collapse
Well official only kitkat if you are international (Samsung decided not to release a lot of device updates in the us for kit kat including the s3, galaxy light, and this one). However I think you can get CM 13.1, idk about anything more recent but there is a (slightly) active community for it still left. Its a shame that this flagship tablet was neglected. I hope it doesn't happen with future Samsung ones but I've avoided buying any. I still use mine on jellybean for basic internet browsing and games
zMrAwesome75 said:
Quote:
Anyone have any luck? I've had this tablet since 2013 and I stopped using it because it has always been such a laggy sluggish experience. I thought I would try putting an AOSP ROM on it to see if that helped. Everything is so old for this device that it's nearly impossible to find the old files, ROMs, recoverys, etc. I can't even get TWRP or CWM to work on it. Maybe it's not worth the trouble anymore.
Click to expand...
Click to collapse
Not sure if you're still looking but I just installed Android Nougat v7.1.2 using the instructions provided here:
https://forum.xda-developers.com/showthread.php?t=2185119
I have a N8010 that topped out at 4.1.2. I flashed to a N8013 kernel/rom about 2 years ago which maxed out at 4.2.2 . I just recently found that link to the LineageOS build (Formerly Cyanogenmod) when I was contemplating buying a new tablet. The tablet was getting a bit sluggish so I decided to go ahead and blast it out and see what happened. I was VERY pleasantly surprised! Had some issues getting the Recovery flashed but once I did, it was pretty smooth from there. I had backed up all the apps so once I got it booted and restored all the apps, I was surprised how responsive it is. Oh, and you can say goodbye to all those SD card issues that the Note 10.1 had since this version of Android integrates the external SD with the internal SD so everything gets installed on the external card. No need for apps like folder mount, etc.
I highly recommend it. The only issue is that you lose the integrated S-Pen functionality but you can reinstall some of those apps from the play store and bring back a lot of those features. Some 3rd party apps actually work better.
Good luck!
7.1.2 on GT-N80013
I am currently running an unoffical build I picked up here on xda it is an unofficial Lineage OS build. I haven't currently found any bugs... camera works, bluetooth works, wifi works... at least for me. The build number is 14.1-20170810-unnofficial-n8013
Hannover2k said:
Not sure if you're still looking but I just installed Android Nougat v7.1.2 using the instructions provided here:
https://forum.xda-developers.com/showthread.php?t=2185119
I have a N8010 that topped out at 4.1.2. I flashed to a N8013 kernel/rom about 2 years ago which maxed out at 4.2.2 . I just recently found that link to the LineageOS build (Formerly Cyanogenmod) when I was contemplating buying a new tablet. The tablet was getting a bit sluggish so I decided to go ahead and blast it out and see what happened. I was VERY pleasantly surprised! Had some issues getting the Recovery flashed but once I did, it was pretty smooth from there. I had backed up all the apps so once I got it booted and restored all the apps, I was surprised how responsive it is. Oh, and you can say goodbye to all those SD card issues that the Note 10.1 had since this version of Android integrates the external SD with the internal SD so everything gets installed on the external card. No need for apps like folder mount, etc.
I highly recommend it. The only issue is that you lose the integrated S-Pen functionality but you can reinstall some of those apps from the play store and bring back a lot of those features. Some 3rd party apps actually work better.
Good luck!
Click to expand...
Click to collapse
I'd appreciate a link to the rom you installed. Thx.
I'm interested as well I'm still running original os. Also wondering if the rom update works well on these tablets since they are older. As Android matures the os gets bigger which can impact performance on older CPUs.
cloves said:
I'm interested as well I'm still running original os. Also wondering if the rom update works well on these tablets since they are older. As Android matures the os gets bigger which can impact performance on older CPUs.
Click to expand...
Click to collapse
I recently installed Lineage OS 14 and it is working great.
Tablet is stable, everything works, great battery life.
All devices work gps, etc...
The s-pen will not work like it did stock but there are apps you can get that seem to work better
Squid and Sketch for drawing....squid seems cool if you write with stylus
Install Magisk instead of supersu.
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Related
Hello XDA!
I have some questions about my n8010. It is a tablet that I bought in Greece, in case that is necessary to know, and has an interesting background. It started late May. The tablet was unrooted and without any mods whatsoever. I was running the latest Jelly Bean update and had A TON of lag. I had replaced TouchWiz Launcher with Nova and a different gallery and music app with still a lot of lag. So I decided to flash CM11 since it would be lighter for the tablet. After some research I followed the root guide from Zedomax and everything was fine. I had root and so I proceeded doing a backup. This where everything got weird. The backup started but was stuck for long periods of time. After some time being stuck in a screen I decided I should force restart. After the Galaxy Note 10.1 logo appeared it just hanged there without booting into Jelly Bean. I checked recovery and download mode and they where all working fine so I flashed TWRP. It worked and so I took a backup and proceeded installing CM11. I had it already in my SD. I had followed the instructions in the XDA thread that said about removing a line to make it work on the n8010. The flash went great and after factory resetting I rebooted the tablet and everything was OK. At the first boot WiFi wouldn't work but after a reboot it was. The only thing that wasn't working was the video recording. It is a deal-breaker as I use it a lot. I had to switch ROMs. I tried CM10.2 and it still wouldn't. Same goes for Revolt. At lat I switched to a TouchWiz based ROM. Specifically Hyperdrive RLS8. Video was working so I stayed there. I was noticing that since I flashed CM11 my tablet showed up as an n8013 which was very weird but since these ROMs where designed for the n8013 I thought it was normal.
One ROM also had the front facing camera able to record. Upon further inspection I found that Download Mode had my tablet as an n8010 but with the flash count 0 and the status official! Now, I'm either super lucky or the completely opposite! It also says official under About Device! Fast forward a few months and I am now in a situation where the tablet lags once again like crazy. I uninstalled a couple of apps and also installed lighter alternatives and it's somewhat bearable. I was reading the Official OmniROM thread and saw that others also had issues, most of which had the new KitKat bootloader that I don't have, with YouTube and the Video Recording. The latest nightlies are said to have a fix. So I am thinking of installing OmniROM since I am lagging a lot and I would like Screen Mirroring to the Chromecast. My only concern is that I will either brick the tablet or the camcorder won't work. Many people have bricked their Notes and can't go back without the Samsung Service. Most have the new KitKat bootloader which I don't and I'm happy about. My tablet is in a weird situation, what should I do? Anybody else experiencing these issues? Any advice is appreciated!
Thanks in advance,
Chris
Edit: Forgot to say that I flashed Carbon ROM in September and I got a status 7 while flashing with PhilzCWM that I had installed in order to flash Hyperdrive. I had to flash back to Hyperdrive as it wouldn't boot after the status 7. It probably happened because it didn't have SE Linux support. If I do anything I'll flash the latest TWRP.
chrismin13 said:
Hello XDA!
I have some questions about my n8010. It is a tablet that I bought in Greece, in case that is necessary to know, and has an interesting background. It started late May. The tablet was unrooted and without any mods whatsoever. I was running the latest Jelly Bean update and had A TON of lag. I had replaced TouchWiz Launcher with Nova and a different gallery and music app with still a lot of lag. So I decided to flash CM11 since it would be lighter for the tablet. After some research I followed the root guide from Zedomax and everything was fine. I had root and so I proceeded doing a backup. This where everything got weird. The backup started but was stuck for long periods of time. After some time being stuck in a screen I decided I should force restart. After the Galaxy Note 10.1 logo appeared it just hanged there without booting into Jelly Bean. I checked recovery and download mode and they where all working fine so I flashed TWRP. It worked and so I took a backup and proceeded installing CM11. I had it already in my SD. I had followed the instructions in the XDA thread that said about removing a line to make it work on the n8010. The flash went great and after factory resetting I rebooted the tablet and everything was OK. At the first boot WiFi wouldn't work but after a reboot it was. The only thing that wasn't working was the video recording. It is a deal-breaker as I use it a lot. I had to switch ROMs. I tried CM10.2 and it still wouldn't. Same goes for Revolt. At lat I switched to a TouchWiz based ROM. Specifically Hyperdrive RLS8. Video was working so I stayed there. I was noticing that since I flashed CM11 my tablet showed up as an n8013 which was very weird but since these ROMs where designed for the n8013 I thought it was normal.
One ROM also had the front facing camera able to record. Upon further inspection I found that Download Mode had my tablet as an n8010 but with the flash count 0 and the status official! Now, I'm either super lucky or the completely opposite! It also says official under About Device! Fast forward a few months and I am now in a situation where the tablet lags once again like crazy. I uninstalled a couple of apps and also installed lighter alternatives and it's somewhat bearable. I was reading the Official OmniROM thread and saw that others also had issues, most of which had the new KitKat bootloader that I don't have, with YouTube and the Video Recording. The latest nightlies are said to have a fix. So I am thinking of installing OmniROM since I am lagging a lot and I would like Screen Mirroring to the Chromecast. My only concern is that I will either brick the tablet or the camcorder won't work. Many people have bricked their Notes and can't go back without the Samsung Service. Most have the new KitKat bootloader which I don't and I'm happy about. My tablet is in a weird situation, what should I do? Anybody else experiencing these issues? Any advice is appreciated!
Thanks in advance,
Chris
Edit: Forgot to say that I flashed Carbon ROM in September and I got a status 7 while flashing with PhilzCWM that I had installed in order to flash Hyperdrive. I had to flash back to Hyperdrive as it wouldn't boot after the status 7. It probably happened because it didn't have SE Linux support. If I do anything I'll flash the latest TWRP.
Click to expand...
Click to collapse
I would have fixed the original lag issues first. I would get it back to factory stock 100 percent, once back to factory I would do A factory reset and start all over. Get the system running stock as it should then reinstall apps one at a time. if it can't run stock for whatever reason other roms not going to fix the problem.
at least with factory stock you know what should be working. Instead of guessing if the problem is part of the new ROM
shaun298 said:
I would have fixed the original lag issues first. I would get it back to factory stock 100 percent, once back to factory I would do A factory reset and start all over. Get the system running stock as it should then reinstall apps one at a time. if it can't run stock for whatever reason other roms not going to fix the problem.
at least with factory stock you know what should be working. Instead of guessing if the problem is part of the new ROM
Click to expand...
Click to collapse
Thanks for the response!
Good idea! I was thinking of going back to stock and repeating everything. It should fix all my issues. It's too bad that I don't have a working stock backup and I will have to flash through Odin. The reason that I am not doing this is because I am afraid of making it even worse from the official status state that I have in Download Mode and my device is an n8013 under About Device. A flash back to stock through Odin would probably flash most of the system parts which would be kinda dangerous. But on the other hand that would mean that I could give it a brand new try with better luck possibly! It's not that TouchWiz ROMs don't work, it's AOSP that doesn't. I played a lot with Hyperdrive and seems like it's doing better from the lag prospective. But that's only gonna last 15 days. I am sure! So, I'll have your response in mind! Might try it out when I have some free time. Unfortunately, that will probably be Christmas.
Thanks,
Chris
Going back to stock is good advice.Should certainly fix the video problem which you said was important.
Phil789 said:
Going back to stock is good advice.Should certainly fix the video problem which you said was important.
Click to expand...
Click to collapse
I don't have any video playback issues. It's just the camcorder that doesn't work in AOSP ROMs.
Yes.My use of the word "video" should have been "video recording".
The time has come!
Hello everyone, happy holidays!
The time has come that I follow your instructions. I've done my research and here's how I'll do it. Do you agree? Do you have any other suggestions?
Take full backups with my current configuration (Hyperdrive RLS8, PhilzCWM)
Factory reset the device and clean it up so that there is a lot of space
Install Samsung Drivers
Flash Stock Greek 4.1.2 Frimware (N8010XXUCMK2_N8010OXXCMK2_HOME.tar.md5) through ODIN v3 1.85
Let it boot up and do a factory reset from stock recovery
Flash TWRP 2.8.1.0 for the GT-N8010 (openrecovery-twrp-2.8.1.0-gt-n8010) (I chose this version since it has the most downloads)
Make a full backup once again
Flash Omni ROM 4.4.4 (omni-4.4.4-20141222-n801x-NIGHTLY)
Flash SuperSU (UPDATE-SuperSU-v2.40)
Flash PA GApps (pa_gapps-modular-mini-4.4.4-20141214-signed.zip)
Factory reset
REBOOT!
Check everything (Video, model, download mode, bugs, etc.)
REPORT!
If everything goes correctly I believe I should be OK! Hope my issues will be over since the tablet is slow once again. Kinda scared, so that's why I'm asking you. Will I be (mostly) brick safe? Hope so!
Thank you very much for your support,
Chris
P.S.: Should I root before leaving stock? I mean through TWRP.
chrismin13 said:
Hello everyone, happy holidays!
The time has come that I follow your instructions. I've done my research and here's how I'll do it. Do you agree? Do you have any other suggestions?
Take full backups with my current configuration (Hyperdrive RLS8, PhilzCWM)
Factory reset the device and clean it up so that there is a lot of space
Install Samsung Drivers
Flash Stock Greek 4.1.2 Frimware (N8010XXUCMK2_N8010OXXCMK2_HOME.tar.md5) through ODIN v3 1.85
Let it boot up and do a factory reset from stock recovery
Flash TWRP 2.8.1.0 for the GT-N8010 (openrecovery-twrp-2.8.1.0-gt-n8010) (I chose this version since it has the most downloads)
Make a full backup once again
Flash Omni ROM 4.4.4 (omni-4.4.4-20141222-n801x-NIGHTLY)
Flash SuperSU (UPDATE-SuperSU-v2.40)
Flash PA GApps (pa_gapps-modular-mini-4.4.4-20141214-signed.zip)
Factory reset
REBOOT!
Check everything (Video, model, download mode, bugs, etc.)
REPORT!
If everything goes correctly I believe I should be OK! Hope my issues will be over since the tablet is slow once again. Kinda scared, so that's why I'm asking you. Will I be (mostly) brick safe? Hope so!
Thank you very much for your support,
Chris
P.S.: Should I root before leaving stock? I mean through TWRP.
Click to expand...
Click to collapse
I did it! It worked. Everything went OK but:
- Flash count is 0 and status official
- Back camera records in slow-mo
- Chromecast mirroring does not work
However:
-My device is an N8010
-I use the front camera instead
-Mirroring was not really needed
-LAG IS HISTORY!!! [emoji50] [emoji2] [emoji2] [emoji2]
I am so impressed by the performance, still doesn't best my nexus 4 with KK 4.4.4 but it's a GIGANTIC IMPROVEMENT! Veeery happy! Thank you for your support, I wouldn't be here without you!
Merry Christmas and happy holidays!
Chris.[emoji2]
As in the title states I have the galaxy tab 2 7.0 and recently I installed CWM and a ROM and everything looked like it went right however after I reloaded my tablet nothing seems different it jus seems to return to stock setting and now I cant do the OTA software update which means now certain apps and games I can no longer uses as it says my device isnt compatible. My goal was to simple update from Jellybean to at Least Kitkat.
Can someone help me. where did I go wrong?
Fleacore210 said:
As in the title states I have the galaxy tab 2 7.0 and recently I installed CWM and a ROM and everything looked like it went right however after I reloaded my tablet nothing seems different it jus seems to return to stock setting and now I cant do the OTA software update which means now certain apps and games I can no longer uses as it says my device isnt compatible. My goal was to simple update from Jellybean to at Least Kitkat.
Can someone help me. where did I go wrong?
Click to expand...
Click to collapse
Go to sammobile and flash the latest stock firmware for your device .
Newyork! said:
Go to sammobile and flash the latest stock firmware for your device .
Click to expand...
Click to collapse
Well after a short research I found a ROM called Resurrection Remix, loaded with 5.0.2 (or Lollipop) however now everything is force closing and I barely got my laptop to see it as MTP again after installing a new Binary (glad that did that trick for that) but I cant get it to boot into CWM Recovery bc I cant access the app the only thing it will let me do right now is change the Binary.
How can I fix this issue?
Edit: Okay so I got that solved with doing a factory reset twice, booted in CWM, loaded up the GApps. Now just wondering if there is away to make it not seen with phone options like the dialer or msgs as its jus a plan old tablet, doesnt take a sim card and has no carrier. I do have the source code but I am not tweaking that til I get a better understanding of it.
After a lot of research and tries (amazingly without bricking) I am now running an even newer version of a CM 13 Marshmellow
Bare with me, I'm a total noob and I hold my hands up, I got a galaxy note 8.0, rooted it fine then I went to install CM 13 for it following partially instructions partially my own knowledge and now it's muffed. No matter how many times I tried it wouldn't work and I was messing around with it all night last night and all day today and in my infinat wisdom I removed all OS from it full stop. I have been sat here for 6 hours trying to put cm on it (tried 11, 12 and 13) tried installing stock marshmallow I downloaded from some site, and even some other ROM I can't remember off the top of my head (the logo is a horse's head or something) and yep nothing what so ever i have tried several different boot thingies like twrp and it always fails when I try to install the ROM, I know I should have backed up and I thought I had using titaniumbackup but that went with the OS. It's currently got twrp on it and I can get into that and connect it Odin (I think that's what it's called) but that's all I can do. Is it fixable or is it scrap? >.<
Update, after putting it down and thinking about it from another perspective I worked out a fix, it's back running 4.4.2 and works fine (on my note I will say the latest update of the Google app causes a problem with the system UI if you have Google now as your launcher) I'll update with full details in the morning in hopes that if anyone else has a similar problem this will help.
QuesteU said:
Bare with me, I'm a total noob and I hold my hands up, I got a galaxy note 8.0, rooted it fine then I went to install CM 13 for it following partially instructions partially my own knowledge and now it's muffed. No matter how many times I tried it wouldn't work and I was messing around with it all night last night and all day today and in my infinat wisdom I removed all OS from it full stop. I have been sat here for 6 hours trying to put cm on it (tried 11, 12 and 13) tried installing stock marshmallow I downloaded from some site, and even some other ROM I can't remember off the top of my head (the logo is a horse's head or something) and yep nothing what so ever i have tried several different boot thingies like twrp and it always fails when I try to install the ROM, I know I should have backed up and I thought I had using titaniumbackup but that went with the OS. It's currently got twrp on it and I can get into that and connect it Odin (I think that's what it's called) but that's all I can do. Is it fixable or is it scrap? >.<
Update, after putting it down and thinking about it from another perspective I worked out a fix, it's back running 4.4.2 and works fine (on my note I will say the latest update of the Google app causes a problem with the system UI if you have Google now as your launcher) I'll update with full details in the morning in hopes that if anyone else has a similar problem this will help.
Click to expand...
Click to collapse
Greetings and welcome to assist. Have you tried any of the CM based roms from xda ? You may only need to update your recovery. Both of these should work on your device
https://forum.xda-developers.com/ga...0-1r61-rom-resurrection-remix-v5-7-3-t3449444
https://forum.xda-developers.com/ga...m-unofficial-lineageos-14-1-gt-n51xx-t3533329
Latest twrp
https://forum.xda-developers.com/galaxy-note-8-0/development/recovery-twrp-2-8-5-0-t3035004
Good Luck
Sawdoctor
*SOLVED: see reply*
The ROM I used before was LineageOS [10.0] and used a custom ROM with Android 9 before that. Needed to unlock my phone, and couldn't do that on Lineage, and had troubles flashing firmware with Odin, so I ended up using FrankensteinS6. The Stock kernel seems to let me input the NCK, and unlock the phone. So that's luckily finally over.
For about 4 days now I've been formatting phone and trying again and again. FrankensteinS6 works, some other 6.0/7.0 ROMs work. But LineageOS now enters a bootloop, and Pixel Experience (9.0 and 10.0) and Evolution X 10.0 don't detect the SIM. The ones that don't detect SIM also show no IMEI, which was worrying at first because I though I lost a partition.
Possibly related, the ROM of Pixel Experience Android 10.0 for G920W8 will not install because (paraphrasing) "This device is zeroflte, this file is for zerofltecan, zeroflte***, zeroflte***" claiming that my phone isn't one of those models. I got this S6 from Bell Canada, and I still have even the sticker that says it is a G920W8, not G920F. However, the Pixel Experience ROM for G920F flashes fine (sans the main problem).
I don't know the exact LineageOS ROM I used before, but I've tried all of their 10.0 releases, tried redownloading, and I get the bootloop every time. I see some info online of flashing modem firmware, but... I don't even know where to start with that. As I mentioned at the start, Odin is crapping out. I couldn't flash firmware with it, because it would reject the phone right after I started flashing. Anything I could do within TWRP would be great. I moved it back to FrankensteinS6 for my sanity, I started doing this Sunday and I'm starting to repeat steps over and over hoping that it just solves itself.
I tried to keep this straightforward, and I'm sure I did a bad job. I can extrapolate on what I have attempted. Please tell me what I have to do to get an android 10 ROM working on this old beauty again.
I do not have all the solutions. As per my tests with my SM-G920W8. I have managed to find ROMS and try them out. I have only seen Nougat 7.0 ROMS to work almost flawlessly. NOT 7.1.2, important, 7.0 only.
I have also tested some Pie and v10 ROMS like Pixel Experience. The ROMS boot nicely but since I do not use a SIM card to call as I use SIP phone numbers and require WiFi. But that left asside, I came upon serious camera issues no matter what I try. Up to now, SamStock ROM is pretty much the best Stock ROM I found but I always need to run the Magisk UNINSTALLER before re-installing the latest Magisk version..
As for Kernels, well, Anything that is oriented with Lineage OS, I've had camera issues even with Nougat v7.0. So basically, the only ROMS I found good, as of today, for now, are stock ROMS v7.0. But, to do your tests, Even if you have a 920F ROM, you can download a 920W8 kernel as long as you download a kernel which supports your installed Android version. Also make sure to download the proper Stock or AOSP kernel (AOSP for LineageOS). There's not many but there's a few ones that work properly.
Another option is to download an AOSP ROM that works for W8 phones, unzip the file and grab the boot file inside corresponding to the W8 or T-Mobile version. You simply unzip your real ROM you want top install, replace the boot file for the one you got and rezip it. This made my phone boot properly for some F version ROMS but again, not without issues. That's why, I really suggest v7.0 Srock ROMS. I hope this helps you a bit. Again, you can have your own tests and other users may have other answers, but this is based off over 30 bootloops in my case of trying to mod a ROM for the W8 model. It's not easy to find a good one for Canada, I admit!!!
I flashed TWRP years ago, and I found out that I had a G920F version flashed. I don't know why Lineage allowed me to use SIM before, but rectifying this issue seems to made the SIM work in newer versions.
I don't know what the S6's predisposition to having crashing cameras is, but I have avoided this in the past by using custom camera apps, like Open Camera. This has saved me every time.
As for the boot loops... I think another thing that helped is that "format data" doesn't wipe the OS. When you are in recovery, having issues with bootloops in various ROMs, try advanced wipe, and wipe the system. It didn't fix right away, but the time I got Pixel Experience 10 up and running that was the trick.
StatiXOS
Download StatiXOS for free. StatiXOS is a homebrew distribution of Android. StatiXOS is a custom ROM based on the Android Open Source Project aiming to be minimal and clean, while providing quality of life improvements and up to date security patches. This page is to provide downloads for...
sourceforge.net
4.2 has been release
"Introduce our OTA Updater!"
For those with the Chrome issue of freezing I have a fix that another user in another ROM thread accidentally found!
If you download
PH1-OTA-PQ1A.190105.090.zip
and then reboot into recovery (TWRP, be sure to disable pin on phone before hand and backup everything) then flash the above (I wiped everything first but DON'T wipe internal storage) then I did a second wipe of everything but internal storage and then I flashed 4.2 of StatiXOS and then I flashed TWRP, then I rebooted phone and set it up from new and restored everything from Cloud backup and I can confirm that I no longer have the Chrome freezing issue.
You can thank seungbaekm over in the Evolution-X 5.4 thread for this fix as he is the one that accidentally flashed the older PH-1 factory image and discovered Chrome then worked again! This should fix the issue for all the new Android 11 ROM 's out there for us folks that have the Chrome browser locking issues.
I did not even test the new 4.2 ROM on its own to see if it happens to fix the Chrome issue but I doubt that it does since it is not mentioned in the release notes. Also I have no idea if any of the other original factory images will also fix the issue, I only downloaded the one they he said he accidentally flashed and used it.
Hope this helps everyone with this issue as I know how frustrating it has been. Sure, there is the Bromite/Brave/Firefox work around, and I have been using and enjoying Bromite since 4.1 but I like having things working the way they are supposed to work.
Thanks you very much
I will test
Following this great insight about the fix of the Chromium issue, I only flashed mata PQ1A.190105.090 NOVENDOR firmware from this old thread, without wiping anything of my current StatiXOS 4.2 installation, and after booting Brave is working perfectly.
So, it seems the issue was caused not by the ROM system or vendor, but the mata QQ1A.200105.007 firmware.
As a consequence of flashing this old no system nor vendor firmware, my device baseband was downgraded, but mobile data seems to be working just fine. I guess it's possible to test newer firmware available at the referenced thread, like PQ1A.190105.112, QP1A.190711.107 or QP1A.190711.148, to identify the latest firmware free of the Chromium issue.
More good news: now Netflix is working fine, also.
UPDATE: I tried all the these firmwares and Netflix worked fine only with the Pie ones. So, PQ1A.190105.112 is the more recent mata firmware that I can use on my PH-1 with StatiXOS 4.2 in order to keep Chromium browsers and Netflix working.
aamadorj said:
Following this great insight about the fix of the Chromium issue, I only flashed mata PQ1A.190105.090 NOVENDOR firmware from this old thread, without wiping anything of my current StatiXOS 4.2 installation, and after booting Brave is working perfectly.
So, it seems the issue was caused not by the ROM system or vendor, but the mata QQ1A.200105.007 firmware.
As a consequence of flashing this old no system nor vendor firmware, my device baseband was downgraded, but mobile data seems to be working just fine. I guess it's possible to test newer firmware available at the referenced thread, like PQ1A.190105.112, QP1A.190711.107 or QP1A.190711.148, to identify the latest firmware free of the Chromium issue.
More good news: now Netflix is working fine, also.
UPDATE: I tried all the these firmwares and Netflix worked fine only with the Pie ones. So, PQ1A.190105.112 is the more recent mata firmware that I can use on my PH-1 with StatiXOS 4.2 in order to keep Chromium browsers and Netflix working.
Click to expand...
Click to collapse
This is some great news, thank you and SirDigitalKnight for the research! I haven't tried this fix yet, but I'm planning to when I flash this week if I do run into the chrome freeze problem. You mentioned this downgrades the device baseband version. I'm not too familiar with that, you did say it's working fine so far, but do you think that could cause issues in the future?
Just a question, does StatiXOS have slim recents included?
Mous3kteer said:
This is some great news, thank you and SirDigitalKnight for the research! I haven't tried this fix yet, but I'm planning to when I flash this week if I do run into the chrome freeze problem. You mentioned this downgrades the device baseband version. I'm not too familiar with that, you did say it's working fine so far, but do you think that could cause issues in the future?
Click to expand...
Click to collapse
I have no idea if using a.Pie firmware could have side effects in the future. So far, I haven't seen any.
Using the StatiXOS Telegram support group, I shared the information about the different firmwares to the devs, so I think they'll tell us if something can go wrong in the future.
Is anyone else having issues with sending a text message with this rom?
vineetbhatia said:
Is anyone else having issues with sending a text message with this rom?
Click to expand...
Click to collapse
If you have VoLTE on, turn it off
vineetbhatia said:
Is anyone else having issues with sending a text message with this rom?
Click to expand...
Click to collapse
If you have VoLTE on, turn it off
Double Post
Just reporting that I did a clean install - "Fastboot -w" on the latest working firmware (JAN20 FW, FEB20 Vendor iirc) and I'm very impressed.
Plus replaced the screen, battery, and buttons cable and now the phone is "essentially" new. Parts are actually quite cheap.
Chrome is working without issues.
360 Camera is working without issues
Haven't tried sending SMS with VoLTE On yet.
Amazing that we still a maintainer.
chanh2018 said:
If you have VoLTE on, turn it off
Click to expand...
Click to collapse
Yup, that worked. Thanks mate..
The March 10th update they pushed out through the OTA updater worked perfectly. It is nice to see we still have good support on this great phone.
SirDigitalKnight said:
For those with the Chrome issue of freezing I have a fix that another user in another ROM thread accidentally found!
Click to expand...
Click to collapse
Thank you for this! And also thanks to @aamadorj for the further investigation!
It's too much of a hassle for me to do this fix right now, and I admit I have adapted to using Bromite and Firefox, but I'll definitely keep this in mind for some other time when I feel more like it... BTW, I did check, and Chrome stil freezes on the latest 4.2 update, no surprise here.
This ROM has been working great for me, very stable, no issues, and the updates are a breeze, especially with the latest OTA updater.
kt-Froggy said:
Thank you for this! And also thanks to @aamadorj for the further investigation!
It's too much of a hassle for me to do this fix right now, and I admit I have adapted to using Bromite and Firefox, but I'll definitely keep this in mind for some other time when I feel more like it... BTW, I did check, and Chrome stil freezes on the latest 4.2 update, no surprise here.
This ROM has been working great for me, very stable, no issues, and the updates are a breeze, especially with the latest OTA updater.
Click to expand...
Click to collapse
You should be able to flash the older Pie firmware without wiping from what I have read but I have not tried that yet. I might try it with the very latest firmware of Pie, PQ1A.190105.112 and see if it screws anything up without wiping the phone. Anyway I always to a backup of the phone to the cloud and also of Whatsapp before I start messing around just in case I have to wipe and so far all my restores have worked perfectly, but yes it is a pain to have to setup wifi's and add back in BT devices and setup security and any double authentication apps you use. Getting used to it now though.
SirDigitalKnight said:
You should be able to flash the older Pie firmware without wiping from what I have read but I have not tried that yet. I might try it with the very latest firmware of Pie, PQ1A.190105.112 and see if it screws anything up without wiping the phone. Anyway I always to a backup of the phone to the cloud and also of Whatsapp before I start messing around just in case I have to wipe and so far all my restores have worked perfectly, but yes it is a pain to have to setup wifi's and add back in BT devices and setup security and any double authentication apps you use. Getting used to it now though.
Click to expand...
Click to collapse
Flashing the contents of the attached files using fastboot should make your device to use last firmware for Android Pie, without losing your current ROM installation.
aamadorj said:
Flashing the contents of the attached files using fastboot should make your device to use last firmware for Android Pie, without losing your current ROM installation.
Click to expand...
Click to collapse
OK, here is my update... Noting your comment in the other post about the downgraded baseband, I decided to exclude the modem from flashing. Flashed everything else from PQ1A.190105.112-NOVENDOR via fastboot, rebooted, and... Chrome froze again. Ugh... :\ OK. I went back to fastboot and flashed the modem - this time after the reboot the problem was fixed.
So, I'd say it's safe to conclude that the modem (baseband) is the actual component that was screwing up the Chromium-based browsers. Go figure...
This ROM is great on the PH-1. At the moment I can't get the LED to blink when notifications arrive. The setting is toggled on.
I've installed magisk, nanodroid and microg (not tried that sort of thing before!). Could that have anything to do with it?
chrisrg said:
This ROM is great on the PH-1. At the moment I can't get the LED to blink when notifications arrive. The setting is toggled on.
I've installed magisk, nanodroid and microg (not tried that sort of thing before!). Could that have anything to do with it?
Click to expand...
Click to collapse
Even with stock rom LED is not blink if you're using stock messages, try Textra and see if it works for you.