after installing this theme,phone restarting again and again .what to do ? - General Questions and Answers

http://forum.xda-developers.com/showthread.php?p=48869026
after installing above theme,phone restarting again and again .what to do ?

restored back using cwm recovery .cwm is awesome !!!!

http://forum.xda-developers.com/showthread.php?p=48869664
what are the requirements to install this theme >???

s7562 said:
http://forum.xda-developers.com/showthread.php?p=48869664
what are the requirements to install this theme >???
Click to expand...
Click to collapse
Instead of posting 3 times, you could edit your post...
Well on-topic : There are no Requirements to Install a Theme, If you readed the whole post, The only Requirement is That it only works on Full stock based roms.

Related

Micromax A60 CWM-Recovery v5 by ngage_me

Presenting CWM Recovery v5
Hi Friends, Here is the download link...
CLICK HERE (Eclair 2.1) with 2.6.29 Kernel
MD5 checksum 37d712d4b8fb3856cd68ffd7147ac9d7
Click to expand...
Click to collapse
Please test this recovery for new A60 devices purchased in 2012
Click here to downlaod New (25th April)
Follow the below procedure to install.
Click to expand...
Click to collapse
How to install... Better instructions here for novice..
1. Install the recovery .img
2. Use "Recovery Manager" apk to install this recovery...
3. on your sdcard there will be a folder "recoveryy" (note 'yy'), place this recover image in that folder.
4. Install from "recovery manager".
Alternative...
You can use "Android downloader" tool to directly flash the recovery...
Purpose of this recovery...... I can see only few... To clarify others doubt...
1. We can utilize latest format of updater/update scripts... while flashing....
2. It does backup of sd-ext also.. not sure if u hv observed for v2.5 or not...
3. Better and faster....
4. Most important... A recovery have nothing to do with any ROM... so it's 2.1 or 2.2 or 2.3... Its sole purpose is to backup the partition
Click to expand...
Click to collapse
Clicking Thanks is the best way to appreciate the work...
Hope I'll get enough thanks this time..
CwM Recovery v5 for Froyo 2.2.1
Here is the link for A60 Froyo 2.2.1 users.....
CLICK HERE (Froyo 2.2.1) with 2.6.32 Kernel STILL WAITING FOR CLARO TESTERS... LINK IS FALSE NOW
Click to expand...
Click to collapse
Installation Procedure remains same as mentioned above.....
CLARO USERS RECOVERY IS UNDER TEST.. NEED MORE TESTER FOR CLARO
Click to expand...
Click to collapse
Cheers.... Njoy.... & Thank....
For those who are using the recovery for first time
1. Root ur phone. check here
2. install busybox from market.
3. Install "recovery manager".. check there is a "recoveryy" folder on ur sd card is created.
4. Download the latest recovery or the v2.5 recovery.. links on my signature..
5. place the downloaded recovery in "recoveryy" folder and flash it via recovery manager..
For those recovery 5 isn't work.. try v2.5 recovery first..
Follow the instruction carefully...
A better way of doing this on the way.. stay tuned...
ngage_me said:
Planned to post for eclair, froyo..
and also for claro users....
Click to expand...
Click to collapse
It was long time awaiting development from your side..Good work again, keep going.........
????
ngage_me, this recovery will enable us to run gingerbread on our fones or something else, thanks for the development, I have already clicked the thanks button.
ngage_me said:
Presenting CWM Recovery v5
Download link will be provided soon.
Waiting for download link......
It's almost ready and I am just testing it to make sure I don't get bombarded with problems...
Hope I'll get enough thanks this time..
Click to expand...
Click to collapse
link ?
dude when are you going to post the link ? and i have clicked on thanks !
ngage_me said:
Presenting CWM Recovery v5
Download link will be provided soon.
Waiting for download link......
It's almost ready and I am just testing it to make sure I don't get bombarded with problems...
Hope I'll get enough thanks this time..
Click to expand...
Click to collapse
bro where is the link bro i am the most happiest man if this recovery works perfect in our a60 really thanks a lot bro
Sorry for d delay friends......
I did tested things.. nd all work fine.. jst usb toggle isn't work this time again..
it's detecting my sd-ext partition too... since i don't hv anything on sd-ext not sure if it will take backup.. for first few test it hvn't created any backup...
so just wanted to double sure before i post here.. that you guys don't loose ur valuable data of sd-ext..
so please b patient...
I'll upload it tonight......
@ngage_me-yes you did that again by making a new recovery as u made earlier, just one bug as you said in the mount corner except everything is fine........
confirmed successful flashing with android download tool on micromax a60.
thanks,I successfully flashed cwm recovery v5.0.2.8 using recovery manager.apk
Sent from my HTC Explorer A310e
@ngage_me
Awesome work!!!
Built from source??
Btw can I get recovery.fstab of this??
Sent from my Micromax_A70 using Tapatalk 2 Beta-4
Stuck at Micromax Screen
I installed the recovery from Recovery Manager App.
Now I get stuck at the Micromax Boot Screen whenever I try to enter recovery.
Any solution?
awesome
bro really awesome bro downloading will reply in a while i already cliked thanks yesterday itself anyway thanks a lot bro
---------- Post added at 04:49 PM ---------- Previous post was at 04:31 PM ----------
bro your recovery is great can u please post me the backup.img files of the 2.1 eclair rom bro please i need them to flash it from the android download tool please help me bro
@nagae_me--please help me bro
rohan.sankhe said:
I installed the recovery from Recovery Manager App.
Now I get stuck at the Micromax Boot Screen whenever I try to enter recovery.
Any solution?
Click to expand...
Click to collapse
@ngage_me Yours Eclair recovery is working but Froyo one is giving error in Android Download Tool and when installed through recovery manager, it is stuck in micromax logo.
Note:- In Eclairs recovery , the kernel version of froyo (in About) is not changing and everything is working.
Congrtzzz.....
ngage_me said:
Presenting CWM Recovery v5
How to install...
1. Install the recovery .img
2. Use "Recovery Manager" apk to install this recovery...
3. on your sdcard there will be a folder "recoveryy" (note 'yy'), place this recover image in that folder.
4. Install from "recovery manager".
Alternative...
You can use "Android downloader" tool to directly flash the recovery...
Clicking Thanks is the best way to appreciate the work...
Hope I'll get enough thanks this time..
Click to expand...
Click to collapse
hey ngage_me....its another grt work from u dude.....u rockzzzzz..........and tanx for upgrading us frm stone age.......
--------------------------------------------------------
Juz click thanx if u liked this post...!!!
small problem bro
bro i flashed the stock rom dump which u provided and i got my cell working but the thing is my sdcard is not detected and nothing is opening messages contacts camera it is showing that android.process has stopped working force close please bro tell me what to do
Suggestion....
sridz.y.j said:
bro i flashed the stock rom dump which u provided and i got my cell working but the thing is my sdcard is not detected and nothing is opening messages contacts camera it is showing that android.process has stopped working force close please bro tell me what to do
Click to expand...
Click to collapse
OK cool!!! seems u messed of few things...
Try factory reset from recovery....
else
follow this... (2.1 original rom)
1. download full dump, link available in signature..
2. In case Android tool is detecting ur phone gr888.. just flash all the image available in the zip... MAKE SURE U HIG ERASE CHECK BOX WHILE FLASHING..., else first install the usb driver available in zip...
3. then repeat the step 2.
i sure ur phone will be back on working.... u can directly flash this recovery instead of using stock recovery from zip...
later u hv all options to using ny other rom...
Cheers!!!...
And yeah sorry for d delay.. i ws out on a party yesterday...
ramyjec said:
@ngage_me Yours Eclair recovery is working but Froyo one is giving error in Android Download Tool and when installed through recovery manager, it is stuck in micromax logo.
Note:- In Eclairs recovery , the kernel version of froyo (in About) is not changing and everything is working.
Click to expand...
Click to collapse
Can you please elaborate.....
which rom are you on.... in case froyo recovery hv problem i want to stop my Claro frnds to flash before i fix up the things....
It won't change anything in About... cauz that purely depends on boot.img and so not to worry...
ngage_me said:
Can you please elaborate.....
which rom are you on.... in case froyo recovery hv problem i want to stop my Claro frnds to flash before i fix up the things....
It won't change anything in About... cauz that purely depends on boot.img and so not to worry...
Click to expand...
Click to collapse
@ngage_me I am using Jet 2.1 (froyo one) and yours froyo recovery is not working (not installing through ARM 11 and if installed using recovery manager it stucks in micromax logo when going into recovery), but eclair recovery is working I have taken backup from it and everything sceems fine even sd-ext was backedup.

Jana Rom 6.5 Crashed and can not recover it

Hi all
I installed Jana ROM 6.5 on my fit some month ago,from last week it is not working !! when I reset, it need about 2-3 min to boot up and after that alot of error shown up about closing the apps etc....
I try to install Jana 8 via CTW 5 but the phone is not wipe correctly and i can not install any custom ROM on it! i tested the Zcreed, Jana 8, Jana 6.5....
after all of them the phone has the last ROM (Jana 6.5) and anything do not changed on it please help me!
Tnx
m-Khadem said:
Hi all
I installed Jana ROM 6.5 on my fit some month ago,from last week it is not working !! when I reset, it need about 2-3 min to boot up and after that alot of error shown up about closing the apps etc....
I try to install Jana 8 via CTW 5 but the phone is not wipe correctly and i can not install any custom ROM on it! i tested the Zcreed, Jana 8, Jana 6.5....
after all of them the phone has the last ROM (Jana 6.5) and anything do not changed on it please help me!
Tnx
Click to expand...
Click to collapse
Wrong place dude!
m-Khadem said:
Hi all
I installed Jana ROM 6.5 on my fit some month ago,from last week it is not working !! when I reset, it need about 2-3 min to boot up and after that alot of error shown up about closing the apps etc....
I try to install Jana 8 via CTW 5 but the phone is not wipe correctly and i can not install any custom ROM on it! i tested the Zcreed, Jana 8, Jana 6.5....
after all of them the phone has the last ROM (Jana 6.5) and anything do not changed on it please help me!
Tnx
Click to expand...
Click to collapse
post such things in Q and A/Troubleshoot section not here........
It is proof that I am noob here, so please someone come and move this post to the right place....
After that is here anyone can help me??
m-Khadem said:
It is proof that I am noob here, so please someone come and move this post to the right place....
After that is here anyone can help me??
Click to expand...
Click to collapse
do this in cwm5:
wipe data/reset
Advanced--->wipe dalvik cache
mounts and storage ----> format /system
install zip from sdcard ---> choose zip from sdcard
if you stuck in bootloop then download ROM again. sometimes downloaded files are corrupted .
I do it several times, and now do it again step by step but nothing changed I tested this way with several roms and all of them returned the same results....
Is any chance to make some changes via odin and pc? if yes whats the procedure pls??
m-Khadem said:
I do it several times, and now do it again step by step but nothing changed I tested this way with several roms and all of them returned the same results....
Is any chance to make some changes via odin and pc? if yes whats the procedure pls??
Click to expand...
Click to collapse
everything that you need to know is here:
http://forum.xda-developers.com/showthread.php?t=1606380
try installing stock firmware again. then go to stock recovery and wipe data ...
EDIT: and first boot in every rom might be 10 minutes so be patient
I checked the stock rom too, but after installing stock rom via Odin, Nothing changed!!!! (Phone is on boot cycle and do not boot up) after stock rom I installed new downloaded FitDroid but it is not working too.....
Help me pls
@a.cid Move please.
m-Khadem said:
I checked the stock rom too, but after installing stock rom via Odin, Nothing changed!!!! (Phone is on boot cycle and do not boot up) after stock rom I installed new downloaded FitDroid but it is not working too.....
Help me pls
Click to expand...
Click to collapse
Once stock rom is installed, go to recovery and wipe /data and then reboot
AXAz0r said:
@a.cid Move please.
Click to expand...
Click to collapse
Please use the reports system instead of mentions. You can get a moderators attention by clicking on the yellow triangle present on the top right corner of every post.

Directly booting to recovery

I have a rooted S-7500, with CWM recovery 5.0.2.8 installed. I (by mistake) allowed the 'software update' option to install a system update(or something) today by mistake (I know, you should never install system updates after rooting. My bad.) Since then, the phone directly goes to the cwm recovery mode on powering on, and i am unable to do anything else
I am not very well versed with the finer details of rooting bootloader recovery n all...so pls some details with steps...if possible .
Any help whatsoever...please I will be really grateful
You have to flash back STOCK rom on your device now...
here is complete guide for how to do & download links...
[GUIDE] Unroot / Unbrick, Flash official stock firmware on galaxy ace plus GT-S7500
thread by @samersh72 simple one & easy to understand everyone
Download stock rom depends on your country
Follow guide
I'm sure you will resolve issue soon
Noworry its just minor problem happens while you dealing with android system ​
j.posarekar70 said:
You have to flash back STOCK rom on your device now...
here is complete guide for how to do & download links...
[GUIDE] Unroot / Unbrick, Flash official stock firmware on galaxy ace plus GT-S7500
thread by @samersh72 simple one & easy to understand everyone
Download stock rom depends on your country
Follow guide
I'm sure you will resolve issue soon
Noworry its just minor problem happens while you dealing with android system ​
Click to expand...
Click to collapse
Thanks!!! It totally worked!
Just a clarification...now that i have got the stock rom back on my phone...am i right in saying that I have lost root access, my phone is totally back to the 'original' state, and i have lost CWM as well? Please correct me if I am wrong.
And assuming that I am correct(above), I would like to re-root my device(need to use proxydroid to surf internet over the damned proxy server!). So..can I follow the standard method, ie, can I do it the same way I had done before, or do i need to do something different now?
And once again...THANK YOU for your help! I had ended up hard bricking my previous phone, and was really scared when this happend to my aceP. You saved me!
Easy way to ROOT your SGAP
Yes by the time you flash stock rom you loss root even any custom recovery you flashed before...
but now if you want to root your SGAP again don't follow that guide again which you done before just follow this :
Download ODIN from Downloading link below (inside ODIN software folder)
Download any one recovery which you like TWRAP / CWM v5.5 (inside Custom recovery folder)
Download Root_SGAP.zip from Root folder & place that zip inside in your sd card
Click to expand...
Click to collapse
Download Link : GALAXY Ace Plus - Basic stuff
FOR Custom_Recovery :
Open odin, be sure your system has already install drivers & if kies is there close it.
extract recovery zip
connect device to pc in download mod (vol down + power + home) & select that (recovery) .md5 file in pda section inside ODIN software
Click start & wait to reboot device
FOR ROOT :
Now boot device in CWM mod ( vol up + down + power + home)
choose zip from sd card & select Root_SGAP.zip
DONE.
Click to expand...
Click to collapse
you've successfully ROOT & flash custom recovery on your device by just few simple steps ​
Just 1 more qstn...is it necessary to apply a custom recovery before rooting? If no, is it recommended?? Because the last time i rooted, it made me put a custom recovery before rooting.
dubey.arpit said:
Just 1 more qstn...is it necessary to apply a custom recovery before rooting? If no, is it recommended?? Because the last time i rooted, it made me put a custom recovery before rooting.
Click to expand...
Click to collapse
if you are going to stick on stock rom forever & only want to root device then stock recovery is ok for you...
but while dealing with custom roms, custom recoveries are smart choice.
it has lot of additional options than stock recovery.
so my opinion yes use custom recovery ​
Stuck in boot loop
Got stuck in boot loop after performing the steps. I was running this ROM.
Had to reinstall the ROM. I'm sure there's something I didn't understand or something I did wrong. I'd be thankful if anyone could point it out.
Thanks in advance.
Snowflakes91 said:
Got stuck in boot loop after performing the steps. I was running this ROM.
Had to reinstall the ROM. I'm sure there's something I didn't understand or something I did wrong. I'd be thankful if anyone could point it out.
Thanks in advance.
Click to expand...
Click to collapse
Check my guide on how to fix a bootloop in my sig
Question About Flashing A Stock ROM
Hi! I had the same problem, and I flashed stock ROM! Now is all Ok, but my phone is not rooted. I want to try it again! But I am scared! What if I again stuck in CWM Boot Loop? Is it possible to that happen again?
And should I install different version of CWM to fix it?
Please help me!
I am NEW here!
Thank you very much in advance,
David Boca
cwm fixed
davidboca2000 said:
Hi! I had the same problem, and I flashed stock ROM! Now is all Ok, but my phone is not rooted. I want to try it again! But I am scared! What if I again stuck in CWM Boot Loop? Is it possible to that happen again?
And should I install different version of CWM to fix it?
Please help me!
I am NEW here!
Thank you very much in advance,
David Boca
Click to expand...
Click to collapse
The new cwm by mb-14 is fixed and there are no more bootloops​
Reply
bibhu60 said:
The new cwm by the wisp is fixed and there are no more bootloops​
Click to expand...
Click to collapse
Can you please give me the Link to the Xda Developers page with it? Many Thanks in advance!
Here it is..
davidboca2000 said:
Can you please give me the Link to the Xda Developers page with it? Many Thanks in advance!
Click to expand...
Click to collapse
CWM 5.5.0.4 BY mb-14
I am also using this recovery from months i have flashed many roms and mods but it does not have any bugs.
Working perfectly...
Hit thanks if I helped You don't say it...
​
thanks
thanks for help

[Q] Phone Stuck at Boot Logo

I have installed 2-3 Roms on my Xperia E dual , every time afetr finishing installation when i reboot the phone, it always got stuck at boot logo.
I tried installing NexboostV6, FireJB(V3), AOKP Rom, CM11
Nexboost showed me status 7 error
Fire JB : Installation completed , but stucked at boot logo after rebooting
AOKP : Completed installation, reboot successfully but Camera, Gallery, Sim nothing worked. Might be in Beta
CM11 : Same as AOKP
Any help in this regard would be appreciated , i want to install custom rom and i am stucked at this point.
Please help, i dont want to go back to stock ROM.
kishanamlani said:
I have installed 2-3 Roms on my Xperia E dual , every time afetr finishing installation when i reboot the phone, it always got stuck at boot logo.
I tried installing NexboostV6, FireJB(V3), AOKP Rom, CM11
Nexboost showed me status 7 error
Fire JB : Installation completed , but stucked at boot logo after rebooting
AOKP : Completed installation, reboot successfully but Camera, Gallery, Sim nothing worked. Might be in Beta
CM11 : Same as AOKP
Any help in this regard would be appreciated , i want to install custom rom and i am stucked at this point.
Please help, i dont want to go back to stock ROM.
Click to expand...
Click to collapse
I think Can't Installing 2-3 ROM At Single Phone.
cz One ROM and OTher Rom Not Have Same Module.
Try Using One ROM ur Best Choice.
Remember Only Use One Custom ROM
And UnlockbootLoader First
x7_ said:
I think Can't Installing 2-3 ROM At Single Phone.
cz One ROM and OTher Rom Not Have Same Module.
Try Using One ROM ur Best Choice.
Remember Only Use One Custom ROM
And UnlockbootLoader First
Click to expand...
Click to collapse
I think u got me wrong, I have tried to install different ROMs at different time, not all together. Because i didnt succeed in any of them.
kishanamlani said:
I think u got me wrong, I have tried to install different ROMs at different time, not all together. Because i didnt succeed in any of them.
Click to expand...
Click to collapse
Sorry My BAD
Before u Install Custom ROM,
Unlock bootloader First.
Root Ur Phone,
Install CWM,
And Flash *.zip Your Own ROM.
Did'nt Work ?
Ok i will have to try once more..
In all this mess , i forgot to check even my phone is rooted or not.
Do restoring original firmware unroot the phone ???
Sorry for so many questions, but there is no option left for me rather than this.
Thanx a lot again
Sent from my XT1068 using XDA Free mobile app
x7_ said:
Sorry My BAD
Before u Install Custom ROM,
Unlock bootloader First.
Root Ur Phone,
Install CWM,
And Flash *.zip Your Own ROM.
Did'nt Work ?
Click to expand...
Click to collapse
Hello Friend,
I got success in installing Nexboost V6 Rom ..
Like always, i got an error
After installing ROM, when i booted phone for first time, it got an error as,
" Unfortunately, Setup guide has stopped "
So please help me if you have any solution. Thanx again
Hey friend i got solution from that ROM thread.
I was just doing a silly mistake.. I skipped one step of format system from mount and storage of CWM.. I didnt knew that.
Thanx again for your help and support.
Sent from my XT1068 using XDA Free mobile app
Next time follow step by step dude
Sent from my ST26i using XDA Premium 4 mobile app
Yeah sure.. Thnx for all ur help
Sent from my XT1068 using XDA Free mobile app

[Video][How-To]Fix Unable To mount /system while installing a ROM

This is a Video TUT on How to fix Unable To Mount /System Partiton
While Flashing A Rom:-
In The Video I have used the Multi-Rom TWRP 3.0.0 but this problem occurred with every Version
Watch the video - Video Starting is About the problem and then the solution to flash roms bypassing this prob.
*This is My First video so ignore Mistakes i made:silly:
Use EarPhone For Best Sound
Proper Method To -Install a rom From TWRP Follow:-
1).Reboot Into recovery [Obviously]
2).Select Wipe-AdvanceWipe-and select Dalvik,Cache,System,Data and Swipe the slider to wipe
3) Then Follow the Procedure i mentioned in video above
4).Then install Any Rom u want
Note:- This is not a permanent fix you have to follow the same procedure every time you want to install the ROM
THANKS To
XDA-Devs
@Sheref (for asking a Video Tut)
@GautamMaini (For Video and Thread)
Do Hit Thanks Button If I Helped It Encourages ME
Reserved Waiting For Video to Upload
Very helpful bro:good:
Bro I got a new method to solve that problem (not a permanently solution).
And now I can install any ROM.
Sheref said:
Bro I got a new method to solve that problem (not a permanently solution).
And now I can install any ROM.
Click to expand...
Click to collapse
What it is
Gautam Maini said:
What it is
Click to expand...
Click to collapse
I'm using old twrp 2.7..1...
Select wipe and select system and then select repair or change file system(something like that)and change the system partition ext4 to ext3 and wipe ,done .install ROM . now I flashed baiducloud os and it successfully installed and booted.
Sry for my bad English
bro its not working for me .. m having twrp 2.7.1 nd trying to flash kit-cat build 4 ... tried everything bt still getting error "unable to mount /system". plaese help.. tnx
aniket_anky said:
bro its not working for me .. m having twrp 2.7.1 nd trying to flash kit-cat build 4 ... tried everything bt still getting error "unable to mount /system". plaese help.. tnx
Click to expand...
Click to collapse
First Wipe system then restart recovery with no os installed. Then mount system and install rom !
Otherwise
Update to latest twrp
aniket_anky said:
bro its not working for me .. m having twrp 2.7.1 nd trying to flash kit-cat build 4 ... tried everything bt still getting error "unable to mount /system". plaese help.. tnx
Click to expand...
Click to collapse
Bro if the method not working ,I have one method>>Using odin u can flash Roms.first you have to install assayed kitchen from this link ( https://forum.xda-developers.com/ch...ndroid-roms-editor-assayyedkitchen-t3410545). Then convert the ROM (the ROM u want to install) to .tar file (its Odin flashable file).
You can get the steps from above link.
Now I'm using this method to install Roms.
For more details PM me.
Thanks!!! You Are great
TheAndroidMods said:
Thanks!!! You Are great
Click to expand...
Click to collapse
Pleasure Helping
Sheref said:
Bro if the method not working ,I have one method>>Using odin u can flash Roms.first you have to install assayed kitchen from this link ( https://forum.xda-developers.com/ch...ndroid-roms-editor-assayyedkitchen-t3410545). Then convert the ROM (the ROM u want to install) to .tar file (its Odin flashable file).
You can get the steps from above link.
Now I'm using this method to install Roms.
For more details PM me.
Click to expand...
Click to collapse
thanks bro u saved the day
aniket_anky said:
thanks bro u saved the day
Click to expand...
Click to collapse
Welcome bro. :good::laugh:
Thanks a Core!
Sheref said:
Bro if the method not working ,I have one method>>Using odin u can flash Roms.first you have to install assayed kitchen from this link ( https://forum.xda-developers.com/ch...ndroid-roms-editor-assayyedkitchen-t3410545). Then convert the ROM (the ROM u want to install) to .tar file (its Odin flashable file).
You can get the steps from above link.
Now I'm using this method to install Roms.
For more details PM me.
Click to expand...
Click to collapse
Hey Sheref, your suggestion rocked.
First, I used Assayyed Kitchen for modifying Jelly Bean 4.1.2 of my Samsung Quattro GT-i8552. I made rom zips and flashed modified rom successfully after changing a few lines in updater-script.
Yesterday, I followed same method for Samsung Core GT-i8262. While flashing the rom, I got status 0 error. Then, I made almost 8 to 10 different rom zips with different alterations in updater-script; some copied from custom roms available for Core. Even after that I got status 0 error. I was highly frustrated with what was going on. I searched XDA for solution for updater-script errors and solutions etc. yesterday. But, I could not get one. Today morning, again I started my search on XDA and your post wished me Good Morning . Finally, I could flash / install modified Jelly Bean 4.1.2 on Core GT-i8262 (rooted, busy box, init.d, deodexed, debloated 84 apps) via odin. Breakthrough!
For Core 28bit .tar file worked; 32bit did not. Any idea why? Because as per my knowledge Quattro and Core are 32bit devices. Please correct me if I am wrong.
Thanks a Core
zooperaj said:
Hey Sheref, your suggestion rocked.
First, I used Assayyed Kitchen for modifying Jelly Bean 4.1.2 of my Samsung Quattro GT-i8552. I made rom zips and flashed modified rom successfully after changing a few lines in updater-script.
Yesterday, I followed same method for Samsung Core GT-i8262. While flashing the rom, I got status 0 error. Then, I made almost 8 to 10 different rom zips with different alterations in updater-script; some copied from custom roms available for Core. Even after that I got status 0 error. I was highly frustrated with what was going on. I searched XDA for solution for updater-script errors and solutions etc. yesterday. But, I could not get one. Today morning, again I started my search on XDA and your post wished me Good Morning . Finally, I could flash / install modified Jelly Bean 4.1.2 on Core GT-i8262 (rooted, busy box, init.d, deodexed, debloated 84 apps) via odin. Breakthrough!
For Core 28bit .tar file worked; 32bit did not. Any idea why? Because as per my knowledge Quattro and Core are 32bit devices. Please correct me if I am wrong.
Thanks a Core
Click to expand...
Click to collapse
Thanks bro.
32bit also not worked for me , idk why. Thanks for trying it. :angel: :angel::angel::angel:
hello, i want to repartition system partition of my galaxy core i8262,any help?
current system partition = 1.25 gb but i want above 1.80 gb or equal to 1.80 gb .
[email protected] said:
hello, i want to repartition system partition of my galaxy core i8262,any help?
current system partition = 1.25 gb but i want above 1.80 gb or equal to 1.80 gb .
Click to expand...
Click to collapse
Don't mess
Gautam Maini said:
Don't mess
Click to expand...
Click to collapse
you mean its impossible to do so
[email protected] said:
you mean its impossible to do so
Click to expand...
Click to collapse
Yes you can say . Repartition can lead to derious damage

Categories

Resources