[GUIDE Win/Linux/Mac] Debrick 4.3 with Odin or Verizon Utility + PIT [SOFT BRICK] - Verizon Samsung Galaxy S III

THIS WILL WORK ONLY IF YOU CAN GET INTO DOWNLOAD MODE (Odin mode) if you bricked your bootloader try HERE
Who can benefit from this?
Anyone who took the OTA to 4.3 then tried to downgrade resulting in a soft brick
Anyone who took the OTA to 4.3 and somehow lost there recovery or follow restoring stock recovery instructions HERE
Anyone who took the OTA to 4.3 but failed with access to download mode
Anyone who wants 4.3 but for some reason can not OTA
Anyone who took the NC1 update (new 4.3) and wants to revert to ML1 (old 4.3 with saferoot and safestrap support)
Linux and Mac users must follow the Odin method using the correct PIT file (found at the bottom of the op) and substitue Odin with Jodin3 found HERE and spam AdamOutler thanks button for making Jodin3
WARNING! UPDATING TO 4.3 WILL RESULT IN A LOCKED BOOTLOADER FOREVER!!
4.3 with Odin
How to enter Download Mode
Make sure your device is completely off
Hold Volume Down + Home
While holding both of them simultaneously press the Power button until you see the disclaimer on the screen
Then let go of all the buttons and press Volume Up
=====================================================================================
Download and extract Odin <--- New link 1/23/14
Download and extract ALL_I535VRUCML1_I535VZWCML1_2198062_REV09_user_low_ship.tar.md5.7z (official old 4.3 tar ball) or ALL_I535VRUCNC1_I535VZWCNC1_2198062_REV09_user_low_ship.tar.md5.7z (official new 4.3 tar ball)
Download kies and install as administrator. make sure the [Unified Driver Installer] check box is checked at the end of the install (Might take some time)
Windows Kies Here
Mac Kies Here
Enter Download Mode
Make sure Kies is closed then plug in your phone and wait for drivers to install
Open Odin As administrator
You should see your phone under ID:COM (you should also see it has been added in message)
Make sure only Auto Reboot and F. Reset Time is checked
Check PDA [ ]
Click on [PDA] And select the .tar file you just extracted (Only use PDA Never use the others)
Wait for it to verify the MD5 then click [Start]
From here on out its all automated Odin will Flash SCH-I535_I535VRUCML1 then restart (dont forget first boot takes time)
If you get stuck in a boot loop go into recovery and do a factory reset (probably should regardless)
4.3 With Verizon Utility [will always push the most recent firmware atm 4.4.2 and you will not be able to go back to 4.3] (Windows only for now)
How to enter Download Mode
Make sure your device is completely off
Hold Volume Down + Home
While holding both of them simultaneously press the Power button until you see the disclaimer on the screen
Then let go of all the buttons and press Volume Up
=====================================================================================
Download and unzip
Windows SUA_ar.zip <--- New Link
Mac SUA_ar.zip
Open SUA_ar folder
Install SUABnRSetup as administrator (might take some time and may not be nessesary)
Download kies and install as administrator. make sure the [Unified Driver Installer] check box is checked at the end of the install (Might take some time)
Windows Kies Here
Mac Kies Here
Make sure Kies is closed then go into download mode and plug into your pc (hold here until drivers install)
Run SUA.exe as administrator
Click on [Repair Assistant] (on the left)
Click on run [Repair Assistant] (on the bottom)
After repair assistant recognizes your phone click [Repair Galaxy S(R) III] (on the right side)
It will say "Due to the condition of your phone/tablet, all data will need to be erased during the repair."
Click [continue]
From here on out its all automated it will download and install SCH-I535_I535VRUCML1 then restart (dont forget first boot takes time)
If you get stuck at 84% try THIS
If you get stuck in a boot loop go into recovery and do a factory reset (probably should regardless)
If you keep failing it might be because you have bad partitions. Download the pit file that matches your phone (16gb S3 use the 16gb pit file or 32gb S3 use the 32gb pit file) Follow the Odin instructions with the addition of your pit file By clicking [PIT] in Odin. Or try this fix Here
SCH-I535_D2VZW_16gb.pit
====================
SCH-I535_D2VZW_32gb.pit
As long as things went smooth you should be back on 4.3 ready to take on the world!
Want root on 4.3? Use saferoot (ML1) HERE or towelroot (ML1/NC1) HERE Remember you are on a locked bootloader. You can not flash insecure bootloader, roms or custom recovery.

awesome. I had given up and was just waiting for the 4.3 tar
I'm really hoping this works since you had the exact same symptoms as me
Thanks in advance!

kangeon said:
awesome. I had given up and was just waiting for the 4.3 tar
I'm really hoping this works since you had the exact same symptoms as me
Thanks in advance!
Click to expand...
Click to collapse
I was waiting as well, But I was about to chuck my Droid x against a wall. Another funny thing is right before I tried this my phone got sudden death syndrome (power button stayed compressed so every time battery is put in it automatically tuns on then off ). Luckily slamming my phone against the table wasn't a internet troll and it got fixed.

ThePagel said:
I was waiting as well, But I was about to chuck my Droid x against a wall. Another funny thing is right before I tried this my phone got sudden death syndrome (power button stayed compressed so every time battery is put in it automatically tuns on then off ). Luckily slamming my phone against the table wasn't a internet troll and it got fixed.
Click to expand...
Click to collapse
Bro I hate my Droid X. I sent my phone out today to have it JTAG to 4.3 and hours later this came out LOL. Good job bro!!!!:good:

I got it working
Thanks so much!

You are a life saver. Thank you!

Good to see that some folks can resurrect their device now. A locked but working phone is certainly better than no phone at all.
Awesome work ThePagel!
Sent from my SCH-I535 using Tapatalk

I signed up just to say thank you. I decided to go for broke and take my phone into Verizon just to see what they said and they suggested I upgrade to a new phone. I'm sure they could have performed this for me, but I'm glad I did it myself. Once again, thank you.

Couple things, when you redo the OP could you make sure to detail what scenario would lead you to using this tool? Maybe make that a little clearer.
Also, we don't have a bootloader to boot directly into like say HTC devices. Samsung let's you boot into recovery or download mode. Download Mode may be an equivalent term to "bootloader" for other devices but it may be confusing to new S3 users down the road. Cheers!
Sent from my SCH-I535 using Tapatalk 4

@ThePagel I PMd you. I will go ahead and post a mirror for the SUA_ar.zip here. You can move this link to the OP. Once everyone wakes up they are gonna shut down your dropbox for excessive traffic.
http://www.androidfilehost.com/?fid=23269279319199403

Would this work on a phone that wasn't bricked but you wanted to just restore it to pristine stock 4.3? (a sort of "oh crap, I accidentally deleted a bunch of system APKs - how do I get those back?!" moment)

s'pht said:
Would this work on a phone that wasn't bricked but you wanted to just restore it to pristine stock 4.3? (a sort of "oh crap, I accidentally deleted a bunch of system APKs - how do I get those back?!" moment)
Click to expand...
Click to collapse
Kies should handle that. Not sure but as never used Kies but you should not need that other file. Just repair in Kies.

Will this repair a broken recovery also? After I took the OTA I rooted then tried to install a custom recovery. Now when I boot to recovery I get the error "SECURE FAIL: KERNAL" as well as the yellow triangle. The phone does work and I can get into download mode, I just want my recovery back so I can do a factor data reset if needed.

harrst1 said:
Will this repair a broken recovery also? After I took the OTA I rooted then tried to install a custom recovery. Now when I boot to recovery I get the error "SECURE FAIL: KERNAL" as well as the yellow triangle. The phone does work and I can get into download mode, I just want my recovery back so I can do a factor data reset if needed.
Click to expand...
Click to collapse
It seems this method will restore the phone to the factory state thus should repair your recovery also.

SlimSnoopOS said:
Couple things, when you redo the OP could you make sure to detail what scenario would lead you to using this tool? Maybe make that a little clearer.
Also, we don't have a bootloader to boot directly into like say HTC devices. Samsung let's you boot into recovery or download mode. Download Mode may be an equivalent term to "bootloader" for other devices but it may be confusing to new S3 users down the road. Cheers!
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
I think I can manage that
prdog1 said:
@ThePagel I PMd you. I will go ahead and post a mirror for the SUA_ar.zip here. You can move this link to the OP. Once everyone wakes up they are gonna shut down your dropbox for excessive traffic.
http://www.androidfilehost.com/?fid=23269279319199403
Click to expand...
Click to collapse
Thankyou!
s'pht said:
Would this work on a phone that wasn't bricked but you wanted to just restore it to pristine stock 4.3? (a sort of "oh crap, I accidentally deleted a bunch of system APKs - how do I get those back?!"
Click to expand...
Click to collapse
Yes
prdog1 said:
Kies should handle that. Not sure but as never used Kies but you should not need that other file. Just repair in Kies.
Click to expand...
Click to collapse
Because he is on 4.3 kies is no help. Its still giving us 4.1.2
harrst1 said:
Will this repair a broken recovery also? After I took the OTA I rooted then tried to install a custom recovery. Now when I boot to recovery I get the error "SECURE FAIL: KERNAL" as well as the yellow triangle. The phone does work and I can get into download mode, I just want my recovery back so I can do a factor data reset if needed.
Click to expand...
Click to collapse
Yes this will work just remember you run the risk of a hard brick if things go wrong

ThePagel said:
I think I can manage that
Thankyou!
Yes
Because he is on 4.3 kies is no help. Its still giving us 4.1.2
Yes this will work just remember you run the risk of a hard brick if things go wrong
Click to expand...
Click to collapse
Ok. I see now. You are just using the drivers from Kies.

Interesting...even after going through this procedure I still get the Samsung "Custom Lock" screen.
Thanks for this btw!!

eudoxia said:
Interesting...even after going through this procedure I still get the Samsung "Custom Lock" screen.
Thanks for this btw!!
Click to expand...
Click to collapse
A lot of original S3s came with that lock. Don't know if we ever figured out why.

eudoxia said:
Interesting...even after going through this procedure I still get the Samsung "Custom Lock" screen.
Thanks for this btw!!
Click to expand...
Click to collapse
prdog1 said:
A lot of original S3s came with that lock. Don't know if we ever figured out why.
Click to expand...
Click to collapse
That is weird. Mine did not ship with custom but after the brick it did have it, then after the unbrick it was gone. Is your warranty in download mode 0 or 1?

prdog1 said:
A lot of original S3s came with that lock. Don't know if we ever figured out why.
Click to expand...
Click to collapse
I stand corrected, after pulling the battery for a minute and rebooting the "Custom Lock" screen is gone..
Thanks ...You Rule :good:

Related

[Q] Problem during rooting help

I was attempting to get root access to my galaxy tab 2 10.1 running android 10.2.1 (or whatever the latest Samsung update was it is 10.2 on my phone but am sure it was 10.2.1 on the tablet.
I was following this guide that someone here recommended
http://www.ibtimes.co.uk/articles/4...-p5113-android41-jellybean-android404-ics.htm
I set usb debug and made sure the drivers were on my pc and made sure KIES was completely not running
Followed the instructions to the letter but should have worried when I found the instructions to get to download were wrong - I found on videos that it was reboot using power and right volume key. That was successful
It connected to ODIN fine and the yellow box came up
I made sure the two boxes were ticked and then searched for the file
CF-Auto-Root-espresso10wifi-espresso10wifibby-gtp5113.zip and started ODIN
it seemed to be going fine until suddenly a red box came up with update failed
Now all I can get on the device is "firmware upgrade encountered an issue. Please select recovery mode in Kies and try again"
No matter how I try to restart this I get the same screen and imagine I couldn't connect to kies even if I should
Can anyone help as I am worried that I have bricked my device - I was looking for a simple way to get root without flashing a whole rom - or is that what I was doing anyway?
Here is a link that may can help you : http://forum.xda-developers.com/showthread.php?t=1722745
Try to do the point A to install CWM Recovery and root correctly the tab then do the point E to install the stock Android 4.0.4
ps : if you want to do something to your tab, try to search here before other websites, big community, good informations/tips (personnal advise) :good:
Maybe file you downloaded is corrupted , redownload it from xda or sammobile and do steps again
n0is said:
Here is a link that may can help you : http://forum.xda-developers.com/showthread.php?t=1722745
Try to do the point A to install CWM Recovery and root correctly the tab then do the point E to install the stock Android 4.0.4
ps : if you want to do something to your tab, try to search here before other websites, big community, good informations/tips (personnal advise) :good:
Click to expand...
Click to collapse
I will take a look but so far the only thing I get is the message to connect to KIES and it wont of course connect - cant get into any other modes - you would think they would have some kind of hard boot recovery button that gets you to basic screen to download the latest firmware.
And I did start here and believe that this led from a post here - I was trying to find the least complicated method of getting root access without changing what I already had too much - the only other process that I found on here seemed to have lots of people reporting problems if it wasn't a 3g model
It is beginning to look like I may have found out what bricking is - thanks for the reply anyway
would like to do that
mjrshark said:
Maybe file you downloaded is corrupted , redownload it from xda or sammobile and do steps again
Click to expand...
Click to collapse
In fact the instructions do say if it doesn't work first time, to run it again with the boxes unticked - the problem is that I cant get back to download mode, or any mode other than the message to connect to kies, so have no way of doing this. So looks like it may have bricked - is there any way of unbricking a tablet?:crying:
It's going to be an expensive mistake especially as I haven't even had the £50 cash back from Samsung yet and I would have to pay full price now to replace it,
So did you remove it from Odin after it failed?
If you connect and pull up Odin, even though its not in download mode, do you get an active com box showing its connected?
Have you tried kies yet?
There is a simple method of rooting in the link posted in the previous post by n0is. At this point you might have to flash a stock image before you try and root again. If you can get an active com port in Odin, run a stock image first, they can be found here in xda. Get it booted up and then make sure you are on the latest android version, its 4.1.1 here in the US. If you try and root first and then update, you will lose root so update first to avoid rooting twice.
Just to clarify the root procedures,
Odin the cwm recovery .tar from the thread.
Reboot to recovery then flash the super user zip for the p5113. It will ask you about erasing stock recovery or something like that, check yes.
And that's it, simple enough
Sent from my SCH-I535 using xda premium
not optamistic but will try!
samsgun357 said:
So did you remove it from Odin after it failed?
If you connect and pull up Odin, even though its not in download mode, do you get an active com box showing its connected?
Have you tried kies yet?
There is a simple method of rooting in the link posted in the previous post by n0is. At this point you might have to flash a stock image before you try and root again. If you can get an active com port in Odin, run a stock image first, they can be found here in xda. Get it booted up and then make sure you are on the latest android version, its 4.1.1 here in the US. If you try and root first and then update, you will lose root so update first to avoid rooting twice.
Just to clarify the root procedures,
Odin the cwm recovery .tar from the thread.
Reboot to recovery then flash the super user zip for the p5113. It will ask you about erasing stock recovery or something like that, check yes.
And that's it, simple enough
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
I will try but I don't think it is going to work. Whenever I connect the tablet by USB I get the usb connecting sound followed immediately by the USB disconnect sound - this just continues to happen every 4 seconds or so all the time that the device is connected. At the moment I have it on charge as once the error screen comes on it doesnt seem to go off for a very long time and then it wont start unless I charge it first. After a few minutes on charge - The firmware upgrade encountered an issue message comes up. I am going to leave it a while until I am sure it is fully charged and then try what you suggest - not optamistic though since I now realise that it is not even connecting properly. I just have a bad feeling about this. I had to disconnect it from the power yesterday because the error screen stays on continuously and the device starts to get warm
Assuming that I ever manage to get a stock image installed will this mean I can go back to normal kies updates - all I really wanted was the standard samsung android O/S but with super user added.
Unfortunately I had read the linked article a while back and what made me more confident was the statement that said it was "virtually impossible to brick this device"
Since it's still going into Charging mode and spitting out error messages, it's not completely bricked. It's just in a reboot loop (a.k.a. soft brick).
Keep trying to get it into Download mode. Sometimes the timing is a little tricky if it's in a boot loop.
1. Disconnect it before trying to get it into Download Mode. If it's plugged in (charger or PC), the device will go into Charging mode instead.
2. Hold the Power button for 10 seconds to make it reboot.
3. When you see the screen turn off, let go of Power and then press and hold Power and Volume Right/Up.
4. If done correctly, it will immediately go into Download Mode. If you see the Samsung logo instead, repeat from Step 2.
some progress but still stuck - any more ideas please
samsgun357 said:
So did you remove it from Odin after it failed?
If you connect and pull up Odin, even though its not in download mode, do you get an active com box showing its connected?
Have you tried kies yet?
There is a simple method of rooting in the link posted in the previous post by n0is. At this point you might have to flash a stock image before you try and root again. If you can get an active com port in Odin, run a stock image first, they can be found here in xda. Get it booted up and then make sure you are on the latest android version, its 4.1.1 here in the US. If you try and root first and then update, you will lose root so update first to avoid rooting twice.
Just to clarify the root procedures,
Odin the cwm recovery .tar from the thread.
Reboot to recovery then flash the super user zip for the p5113. It will ask you about erasing stock recovery or something like that, check yes.
And that's it, simple enough
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
Hi well thanks -
when I connected Odin it did show up yellow and so I downloaded the P5110 stock from from the other thread - all went well and it reported all OK and re-booted - saw the animated sequence but now it has stalled on the samsung logo and still wont connect to kies
So still stuck but at least it has moved on - The instructions on the other page were a little unclear about one stage
It said if there was pit file included to set something and tick repartition - this was all in one line and so I assumed part of the pit instruction - as there was no pit file I did not tick re-partition - I wonder if I should have done?
I have just reconnected to ODIN and the ID Com is still lit up yellow so presumably I could try running it again, or should I look on here for another stock rom - I am wondering if I have somehpw scewed up the bootloader and if so how I go about restoring it
ODIN is the only thing it connects to right now

System Software not authorized by verizon wireless has been found on your phone

I need help guys,
I used Odin to root the phone and did my first custom rom which is the clean rom...it went through the process and when it was about to reboot i got the system software not approved by verizon and take phone to store
I have been told to odin back to stock but it wont let me. The stock image on odin wont work it says fail
I tried the first method and used odin in download mode to flash the stock image
Failed:
This is what I get
added
Odin V3 engine
File Analysis
all threads completed (succeed 0 / Fail 1)
In the Odin Download mode on the phone the top left reads as follow
Odin Mode (Red Letters)
Product Name (SCH-I535)
Custom Binary Download : Yes (1 counts )
Current Binary Custom
System Status Custom
Qualcomm Secureboot: Enable
One thing I gotta mention is that when I got the phone last week it had an OTA update from Verizon which I did install and then a few days later I rooted the phone and when I tried to use Clean Rom it gave me the dreaded Verizon message
Sounds like you didn't unlock the bootloader.
Ya your bootloader is locked again ... unlock it and redo the steps everything should be fine after that
Guys I know that the bootloader is locked but i cannot get back to stock to unroot phone and then unlock the bootloader
Odin recognizes phone but the stock image goes into fail mode right away
I cannot get into recovery and the only thing I can do is go to download mode and Odin but nothing else
http://forum.xda-developers.com/showthread.php?t=1840030&highlight=jtag
http://forum.xda-developers.com/showthread.php?t=1798850
http://rootzwiki.com/topic/29256-tutorial-rootrecoverybootloader-unlockicsjb-verizon-galaxy-s-iii/
http://www.android.gs/fix-bricked-verizon-galaxy-s3/
one of these may be able to help you ... i lost the original link i had but saved these for bootloader issues hope they help they should
Stranger_84 said:
http://forum.xda-developers.com/showthread.php?t=1840030&highlight=jtag
http://forum.xda-developers.com/showthread.php?t=1798850
http://rootzwiki.com/topic/29256-tutorial-rootrecoverybootloader-unlockicsjb-verizon-galaxy-s-iii/
http://www.android.gs/fix-bricked-verizon-galaxy-s3/
one of these may be able to help you ... i lost the original link i had but saved these for bootloader issues hope they help they should
Click to expand...
Click to collapse
You are aware he can Odin flashed the latest OTA instead of that you have provided. Here it is :http://forum.xda-developers.com/showthread.php?t=2046439. This will also help fix his phone being that it is recent. Forgot this link to get him back on track: http://forum.xda-developers.com/showthread.php?t=1974114.
i thought thats what he already tried? but yes you can odin any ota file being that an unlocked bootloader isnt needed.
When I try the VRBLK3 chain it goes into set up connection for like 10 minutes on Odin with a fail at the end each time
I'm not sure being ive never had that issues ... im sorry and good luck
try flashing odin stock ROM, not bootchain
NYGiants4Natic said:
When I try the VRBLK3 chain it goes into set up connection for like 10 minutes on Odin with a fail at the end each time
Click to expand...
Click to collapse
Did you put the file in PDA in Odin they only work if you checked PDA.
NYGiants4Natic said:
When I try the VRBLK3 chain it goes into set up connection for like 10 minutes on Odin with a fail at the end each time
Click to expand...
Click to collapse
I had a similar issue once. This helpful post by h3llsdr0id eventually got me up and running. Took a total of like 4 hours though lol.
http://forum.xda-developers.com/showpost.php?p=30569324&postcount=26
Make sure you have the correct files. This is for the original root66 so it's ICS. Once I booted up and activated I took the Verizon OTAs all the way to JB and then rooted/unlocked bootloader.
edit: I actually had to go back to ICS to reprovision my SIM so not sure you have to go through all of this. Try to odin stock JB ROM like mentioned above.
Thank YOU so much guys you have made my day.
After trying all last night and today I got it back to stock with the OTA file through ODIN. That is all I needed and it went right back to brand new stock phone using 4.1.1
WOW.
I thought I was going to have a dead phone.
Thank you all
Glad you got it up and working!!!!!
Yea I had the same problem but all it needed was a handy flash back to stock. The good thing with making these mistakes is that if it happens again you know what to do.
Sent from my SCH-I535 using xda app-developers app
I'm having the same problem and can't get into download mode
Gatanater said:
Yea I had the same problem but all it needed was a handy flash back to stock. The good thing with making these mistakes is that if it happens again you know what to do.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Hi there,
Could someone please help me. I bricked my phone 3 days go and went through odin and root66 stock to unbrick it. I installed CWR and backed up everything, then i purchased triangle away to reset the flash counter. When I did that I got the software not authorized by verizon error screen. It won't let me get into download mode or recovery. Can I still try to use odin? What should I do? I'd really appreciate some help today is the 4th day I have been trying to fix my phone, only to make it worse.
Thank you in advance
You have to get into download mode to use Odin. It will go into download mode, if you will search, there are ways to pull battery along with button combo to get it there. After rooting, use EZ Unlock 1.2 and that will unlock your bootloader without then unauthorized message from Verizon. Make sure you use only that version, the others don't work.
Re: I'm having the same problem and can't get into download mode
mj76 said:
Hi there,
Could someone please help me. I bricked my phone 3 days go and went through odin and root66 stock to unbrick it. I installed CWR and backed up everything, then i purchased triangle away to reset the flash counter. When I did that I got the software not authorized by verizon error screen. It won't let me get into download mode or recovery. Can I still try to use odin? What should I do? I'd really appreciate some help today is the 4th day I have been trying to fix my phone, only to make it worse.
Thank you in advance
Click to expand...
Click to collapse
Pull battery, hold volume down+home+power keys while you put the battery back in. If that's too many buttons to fumble with at the same time you can try pulling battery, put it back, hold all three keys while plugging it into your computer. My old phone worked that way, idk about the s3. You SHOULD get the download triangle and it asking you if you want to continue. Hit volume up to continue then plug it in and odin should recognize it. Get the stock rom image to flash in the PDA slot of odin. Accept the OTA's until you're up to date then unlock bootloader, root, then flash custom roms/kernels AFTER you've done the appropriate reading. Theres a sticky in development takes you step by step on how to unbrick, then unlock and root. Those should help once you get into download. Hope this helps! :fingers-crossed:
flammablepez said:
Pull battery, hold volume down+home+power keys while you put the battery back in. If that's too many buttons to fumble with at the same time you can try pulling battery, put it back, hold all three keys while plugging it into your computer. My old phone worked that way, idk about the s3. You SHOULD get the download triangle and it asking you if you want to continue. Hit volume up to continue then plug it in and odin should recognize it. Get the stock rom image to flash in the PDA slot of odin. Accept the OTA's until you're up to date then unlock bootloader, root, then flash custom roms/kernels AFTER you've done the appropriate reading. Theres a sticky in development takes you step by step on how to unbrick, then unlock and root. Those should help once you get into download. Hope this helps! :fingers-crossed:
Click to expand...
Click to collapse
Thank you for your response. I tried pulling the battery out and holding volume down, home and power keys at the same time while putting battery in, even as i plugged it into my phone, but nothing but the unauthorized error screen comes up. I should note that my phone is note 2 not s3. I apologize for posting it here, but this thread seemed to be just like the problem i was having.

No OS installed?

After flashing a volume mod, everything went to hell with my phone(stock rom)I for force closes on chrome/andora and i couldnt use my phone since i keep clicking ok to the fc's notification but they kept coming back.
so i decided to do a factory reset but i dont know what went wrong that now in recovery when i click reboot after the reset it says NO OS INSTALLED DO YOU WANT TO REBOOT?
does this mean i need to flash a new rom or what? I was on the stock rom and i kinda want to go back to that but i dont kno what went wrong
no os probs!
oscar996 said:
After flashing a volume mod, everything went to hell with my phone(stock rom)I for force closes on chrome/andora and i couldnt use my phone since i keep clicking ok to the fc's notification but they kept coming back.
so i decided to do a factory reset but i dont know what went wrong that now in recovery when i click reboot after the reset it says NO OS INSTALLED DO YOU WANT TO REBOOT?
does this mean i need to flash a new rom or what? I was on the stock rom and i kinda want to go back to that but i dont kno what went wrong
Click to expand...
Click to collapse
So you can get into recovery? if so did you make a backup before sound mod? I know tdunham was one of the gents that made the sound mod, not sure which one your using created by who? Tdunham has a restore file for volume if problems arise. so if your using his awesome mods you should send him message. If all else fails or you are jus lazy just odin the firmware file required for your phone. Everything will be the same as before jus not rooted so reroot with method you have used not sure when you got phone but I heard towel root doesn't trip knox.
Iceburn1 said:
So you can get into recovery? if so did you make a backup before sound mod? I know tdunham was one of the gents that made the sound mod, not sure which one your using created by who? Tdunham has a restore file for volume if problems arise. so if your using his awesome mods you should send him message. If all else fails or you are jus lazy just odin the firmware file required for your phone. Everything will be the same as before jus not rooted so reroot with method you have used not sure when you got phone but I heard towel root doesn't trip knox.
Click to expand...
Click to collapse
i used a volume mod to remove the high volume notification
im thinking of odin the firmware but i dont want to lose my internal storage.
I cant make a backup because in recovery it tries to save to internal and i dont have space, i cant figure out how to make it go to sd card.
restore
oscar996 said:
i used a volume mod to remove the high volume notification
im thinking of odin the firmware but i dont want to lose my internal storage.
I cant make a backup because in recovery it tries to save to internal and i dont have space, i cant figure out how to make it go to sd card.
Click to expand...
Click to collapse
I would just restore firmware, http://forum.xda-developers.com/showthread.php?t=2742994, this a great place to have stickied, anything new gets posted here for sprint s5. Check your phone firmware first so you know which one to download, do this by going to settings, about phone, then scoll to bottom you should see one of these three firmwares ncb, nd2, ne5, you will want to find firmware file at top in link, if you cant find your firmware there, then go to sammobile.com, then download odin 3.09 from this link, http://forum.xda-developers.com/gal...08-2013-odin-3-09-odin-1-85-versions-t2189539.
Iceburn1 said:
I would just restore firmware, http://forum.xda-developers.com/showthread.php?t=2742994, this a great place to have stickied, anything new gets posted here for sprint s5. Check your phone firmware first so you know which one to download, do this by going to settings, about phone, then scoll to bottom you should see one of these three firmwares ncb, nd2, ne5, you will want to find firmware file at top in link, if you cant find your firmware there, then go to sammobile.com, then download odin 3.09 from this link, http://forum.xda-developers.com/gal...08-2013-odin-3-09-odin-1-85-versions-t2189539.
Click to expand...
Click to collapse
the thing is ICANT USE THE PHONE it boots into thhe lockscreen and then i get force close which i cant close becuase they keep coming back
EDIT:
now my phone doesnt boot, i am ableto get into recovery and i my internal storage hasent been erased.
can i flash a stock rom to unroot(odin) while keeping my files intact?
restore
oscar996 said:
the thing is ICANT USE THE PHONE it boots into thhe lockscreen and then i get force close which i cant close becuase they keep coming back
EDIT:
now my phone doesnt boot, i am ableto get into recovery and i my internal storage hasent been erased.
can i flash a stock rom to unroot(odin) while keeping my files intact?
Click to expand...
Click to collapse
Figured you couldnt get into phone to load, that why i had suggested to restore, in my posts before , i had said u should restore firmware, it will bring bac to normal state without deleting your stuff, you will jus have to reroot?!! Are you reading my posts???
Iceburn1 said:
Figured you couldnt get into phone to load, that why i had suggested to restore, in my posts before , i had said u should restore firmware, it will bring bac to normal state without deleting your stuff, you will jus have to reroot?!! Are you reading my posts???
Click to expand...
Click to collapse
oops sorry I totally scrolled trhough your post.:cyclops: thanks tho
Im waiting for pc to install driver then ill figure out what firmare i need because i have no idea which one
restore
oscar996 said:
oops sorry I totally scrolled trhough your post.:cyclops: thanks tho
Im waiting for pc to install driver then ill figure out what firmare i need because i have no idea which one
Click to expand...
Click to collapse
Not tryin to be rude jus curious if u were, i hope u can figure this out, i love my phone to death so i feel ur pain bro. Check firmware settings about phone scroll to bottom to find ur firmware. Oh if u do not have developer options activated while on same screen in settings in about phone click the build section seven times it will make developer options appear, then go into developer options which shows in your settings now and activate usb debugging, you this so u can interface with odin, and oh yeah our phones need to be in download mode to flash firmware, assuming u used towel root since u havent used odin yet?!?! You can get into download mode by pressing and holding volume down, home button and power button. Let me know bro!
Iceburn1 said:
Not tryin to be rude jus curious if u were, i hope u can figure this out, i love my phone to death so i feel ur pain bro. Check firmware settings about phone scroll to bottom to find ur firmware. Oh if u do not have developer options activated while on same screen in settings in about phone click the build section seven times it will make developer options appear, then go into developer options which shows in your settings now and activate usb debugging, you this so u can interface with odin, and oh yeah our phones need to be in download mode to flash firmware, assuming u used towel root since u havent used odin yet?!?! You can get into download mode by pressing and holding volume down, home button and power button. Let me know bro!
Click to expand...
Click to collapse
well i cant boot phone so i cant check what firmware since recovery says no OS installed.
what is driving me crazy is my pc recognizes the phone but odin doesnt
i plug in phone the driver installs but then i get a message with modem failed intallation WTF?
this is the same pc i used to root
is there a way to do this WITHOUT using pc for example downloading a flashable file and do this all through recovery
also when i am in recovery and i press system boot i get a message that says YOUR DEVICE DOES NOT APPEAR TO BE ROOTED INSTALL SUPER SU SWIEPE TO INSTALL??
wtf happend , all i did was factory reset after a bad volume mod
im coming from an evo 4g and it seemed way simpler than this
restore
oscar996 said:
well i cant boot phone so i cant check what firmware since recovery says no OS installed.
what is driving me crazy is my pc recognizes the phone but odin doesnt
i plug in phone the driver installs but then i get a message with modem failed intallation WTF?
this is the same pc i used to root
is there a way to do this WITHOUT using pc for example downloading a flashable file and do this all through recovery
also when i am in recovery and i press system boot i get a message that says YOUR DEVICE DOES NOT APPEAR TO BE ROOTED INSTALL SUPER SU SWIEPE TO INSTALL??
wtf happend , all i did was factory reset after a bad volume mod
im coming from an evo 4g and it seemed way simpler than this
Click to expand...
Click to collapse
Okay so u have no nandroids??? If not check the box your s5 came in they usually have the firmware it comes with printed on box. If you dont have that either, i would to jus download ne5 which the most recent firmware has new modem, still rootable, and it will put os back on your phone. After you do this make nandroid! They are your best friend!!!! Oh yeah odin isnt recognizing your phone because on samsung phones there is a download mode, with phone turned off, press volume down home button, and power all at same time keep holding till download mode iniates. It will say like loading custom os blah blah...press up on volume and presto odin is recognizing your phone.
Iceburn1 said:
Okay so u have no nandroids??? If not check the box your s5 came in they usually have the firmware it comes with printed on box. If you dont have that either, i would to jus download ne5 which the most recent firmware has new modem, still rootable, and it will put os back on your phone. After you do this make nandroid! They are your best friend!!!! Oh yeah odin isnt recognizing your phone because on samsung phones there is a download mode, with phone turned off, press volume down home button, and power all at same time keep holding till download mode iniates. It will say like loading custom os blah blah...press up on volume and presto odin is recognizing your phone.
Click to expand...
Click to collapse
sorry i forgot to keep u updated i am in download mode, drivers installed
i open odin and nohing happens
i have spent the last 4 hours messing with drivers failed during installation until now that i managed to install the usb modem but after it istalls i open odin and there is nothing there so i restarte pc and SAME thing, the drivers are either a succes or usb mobile modem failed but odin 3.o9 doesnt work( Iused the same file to root)
i dont understan how i had everyhting yesterday morning but i just flashed the volume mod and my pc is messed up know ?? with all this driver error crap
is there any other way of installing and OS WITHOUT odin(maybe via SD CARD) because i have tried EVRYTHING and i cant get my pc to recognize the phone. it install the drivers but then it doesnt show up on ODIN i restart again and i get an exclamation mark on the driver via device manager
i dont have another pc to try execpt my macbook but macs and android rooting is a no no .
restore
oscar996 said:
sorry i forgot to keep u updated i am in download mode, drivers installed
i open odin and nohing happens
i have spent the last 4 hours messing with drivers failed during installation until now that i managed to install the usb modem but after it istalls i open odin and there is nothing there so i restarte pc and SAME thing, the drivers are either a succes or usb mobile modem failed but odin 3.o9 doesnt work( Iused the same file to root)
i dont understan how i had everyhting yesterday morning but i just flashed the volume mod and my pc is messed up know ?? with all this driver error crap
is there any other way of installing and OS WITHOUT odin(maybe via SD CARD) because i have tried EVRYTHING and i cant get my pc to recognize the phone. it install the drivers but then it doesnt show up on ODIN i restart again and i get an exclamation mark on the driver via device manager
i dont have another pc to try execpt my macbook but macs and android rooting is a no no .
Click to expand...
Click to collapse
As far as making your computer fully recognize and through ODIN(hope u pressed up button once in download mode makes odin recognize!) I would uninstall those old drivers, type into google s5 samsung drivers, prob doesnt mean a hoot but to just to be extra precise, download install new ones. Maybe try different odin 3.07 ....and when u run odin make sure u are extracting package if zip and right click program once extracted and run a administrator. No need to touch any settings once in ODIN besides loading firmware. Fell asleeo sorry for late response.
Download and install cnexus stock rom from the dev section. That should get you running again.
Do you have twrp? Sounds like you wiped the system instead of doing a factory reset.
Sent from my SM-G900P using Tapatalk
well i couldnt get odin to recognize phone in download mode. I deleted drivers and rebooted but i always get samsung usb modem failed. and When i do manage to get in to install, it still doesnt show up in odin(.09 and 3.07) and in device manager there is a yellow triangle in samsung modem.
I will try to uninstall everything and delete samsung registry keys as i saw something in google that it might help.
crawrj said:
Download and install cnexus stock rom from the dev section. That should get you running again.
Do you have twrp? Sounds like you wiped the system instead of doing a factory reset.
Sent from my SM-G900P using Tapatalk
Click to expand...
Click to collapse
can i flash this rom even tho it says in recovery that i have no OS and that i do not have SuperUS installed?
oscar996 said:
can i flash this rom even tho it says in recovery that i have no OS and that i do not have SuperUS installed?
Click to expand...
Click to collapse
Hit thanks by accident. Yes it should work although I haven't done it on the S5. Once you get a computer working you can use odin 3.09 and flash my full tar no data file. This will get you up to full NE5 without wiping data.
Sent from my SM-G900P using Tapatalk
crawrj said:
Hit thanks by accident. Yes it should work although I haven't done it on the S5. Once you get a computer working you can use odin 3.09 and flash my full tar no data file. This will get you up to full NE5 without wiping data.
Sent from my SM-G900P using Tapatalk
Click to expand...
Click to collapse
i apologize for my ignorance but what do you mean by " it will get you up to FULL ne5"
by flashing the rom you mentioned am i not flashing completly?
oscar996 said:
i apologize for my ignorance but what do you mean by " it will get you up to FULL ne5"
by flashing the rom you mentioned am i not flashing completly?
Click to expand...
Click to collapse
It depends on where you are now. If you are ND2 now then by flashing the Rom (system) you are only bringing your system up to NE5. To get all of the other firmware up to NE5 you need to do it with Odin on a computer. Because some of the firmware won't update using Mobile Odin.
If you are already on NE5 then you don't need to do anything else after installing the rom from recovery.
Sent from my SM-G900P using Tapatalk
This may sound stupid, but at the expense of stating the obvious, are you using the original usb charger cable that came with your phone to connect to your pc. If not, you should. I had this problem 2 phone generations ago, I thought I had bricked my phone. Use the original cable. All other usb cables are a Crap shoot.
Xalky said:
This may sound stupid, but at the expense of stating the obvious, are you using the original usb charger cable that came with your phone to connect to your pc. If not, you should. I had this problem 2 phone generations ago, I thought I had bricked my phone. Use the original cable. All other usb cables are a Crap shoot.
Click to expand...
Click to collapse
yes im using the samsung usb cable but for some reason it install the usb modem drive but in device manager there is a triangle with en error on samsung usn(even though i get a notification saying ready to use and succesfull installation)
im going to delete all samsung traces from my pc and try again( I rooted with this pc which is odd)

[Q] Please help me!

Good evening all.
I own a Samsung Galaxy Tab 4 7 inch model, The other day I rooted my device and everything was working fine. A few days ago I left my device over a friends house and when I went to go pick it up, I load the Tab 4 up, I am stuck on the Samsung logo. I do have twerp installed and able to get in recovery mode, I try to just reset it to factory reset and I get a error says failed because storage and data can not be mounted. My question is where can I get the factory reset rom so I can flash my device back to factory restore?
If anyone can help me it would be deeply apprecicated..
- Ponteeman
ponteeman said:
Good evening all.
I own a Samsung Galaxy Tab 4 7 inch model, The other day I rooted my device and everything was working fine. A few days ago I left my device over a friends house and when I went to go pick it up, I load the Tab 4 up, I am stuck on the Samsung logo. I do have twerp installed and able to get in recovery mode, I try to just reset it to factory reset and I get a error says failed because storage and data can not be mounted. My question is where can I get the factory reset rom so I can flash my device back to factory restore?
If anyone can help me it would be deeply apprecicated..
- Ponteeman
Click to expand...
Click to collapse
You can find any stock touchwiz on sammobile(.com) (can't post link, not on the forum for long enough!) (take the one for your device, beware that there are multiple models of the same device, so make sure to take the good one) . But you have to flash it with odin in download mode. You will lose everything, root, games, pictures, twrp, etc... (It's actually a really good way to get back your warranty on your device, since it looks like nothing has ever been modified). btw, try saying what your problem is on the title when you do a post, more people will answer you.
Tell me if it worked and if you do not know how to flash stock touchwiz to your device, tell me
If it helped you, don't forget to thank me!
TheIcE65 said:
You can find any stock touchwiz on sammobile(.com) (can't post link, not on the forum for long enough!) (take the one for your device, beware that there are multiple models of the same device, so make sure to take the good one) . But you have to flash it with odin in download mode. You will lose everything, root, games, pictures, twrp, etc... (It's actually a really good way to get back your warranty on your device, since it looks like nothing has ever been modified). btw, try saying what your problem is on the title when you do a post, more people will answer you.
Tell me if it worked and if you do not know how to flash stock touchwiz to your device, tell me
If it helped you, don't forget to thank me!
Click to expand...
Click to collapse
Thank you so much for the prompt reply.
One question tho, I was there a little bit ago there are so many of the same restock roms for my device, I don't know which one I need to download.
ponteeman said:
Thank you so much for the prompt reply.
One question tho, I was there a little bit ago there are so many of the same restock roms for my device, I don't know which one I need to download.
Click to expand...
Click to collapse
Go to setting---> about phone, and try to find your model number (I do not have access to my phone right now, so I can't tell you where it is exactly). then take the one on sammobile that has the same model number.
TheIcE65 said:
Go to setting---> about phone, and try to find your model number (I do not have access to my phone right now, so I can't tell you where it is exactly). then take the one on sammobile that has the same model number.
Click to expand...
Click to collapse
The problem is I can't get into my android because it is stuck on the samsung logo. The only thing I can do is enter either twerp recovery mode or download mode. other than that I cant get go in my settings because I cant access my android operating system.
ponteeman said:
The problem is I can't get into my android because it is stuck on the samsung logo. The only thing I can do is enter either twerp recovery mode or download mode. other than that I cant get go in my settings because I cant access my android operating system.
Click to expand...
Click to collapse
Oh that's true... If you have a removable batterie, try checking if it's not written on it/under it.
TheIcE65 said:
Oh that's true... If you have a removable batterie, try checking if it's not written on it/under it.
Click to expand...
Click to collapse
A friend of mines has the same tablet, I had him look into his settings and the model number is SM-T230NU. On the sam Mobile page there are 4 diffrent choices, Canada, Unknown and Cellular south that fits my model number. I downloading the unknown as we speak and going to see if that works..
ponteeman said:
A friend of mines has the same tablet, I had him look into his settings and the model number is SM-T230NU. On the sam Mobile page there are 4 diffrent choices, Canada, Unknown and Cellular south that fits my model number. I downloading the unknown as we speak and going to see if that works..
Click to expand...
Click to collapse
Great! Give me feedback after!
Oh, and just if you didn't see :
Instructions
Extract (unzip) the firmware file
Download Odin v3.09
Extract Odin zip-file
Open Odin v3.09
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minutes
Don't forget to "thank" me if I was helpful
Thanks for all your help!
TheIcE65 said:
Great! Give me feedback after!
Oh, and just if you didn't see :
Instructions
Extract (unzip) the firmware file
Download Odin v3.09
Extract Odin zip-file
Open Odin v3.09
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minutes
Don't forget to "thank" me if I was helpful [/QU
I am back in business. The restock firmware worked great. Thank you again for all your help. I ve been searching for help all day long.
You were the first and only person to take time to help me out and for that I thank you!! You rock
- Pontee
Click to expand...
Click to collapse
I'm happy to here that, something similar happenned to me and it was real hard to figure out what to do, so I'm glad you didn't have to figure it out alone
Everything is working great now..lol I thought I had really screwed something up..

<GUIDE><TOOLS> Verizon S6 Stock Restore Files<ODIN><SmartSwitch>

<GUIDE><TOOLS> Verizon S6 Stock Restore Files<ODIN><SmartSwitch>
I will not be updating this thread any further. I no longer own the device.
Here is a link to the stock Verizon tar file to flash in download mode via Odin. I will add more files as they become available. Use this to return to factory stock if a factory reset dose not solve any problems you may have with your retail Verizon S6. If you find these files useful and download them please hit the thanks button. Do not copy these files and repost them, make a link to this thread instead. If I missed anything in the instructions please let me know and I will update the OP. Thanks and enjoy.​
Install Instructions​1: Download Odin and Verizon S6 Retail Tar from the links below. Then extract the Odin.zip file ..
2: Run Odin and pick the AP button then navigate to where you saved the file you want to flash and chose that file. Let Odin verify the file.
3: Turn off your phone and enter download mode by holding the home, volume down and the power buttons until the enter download mode screen appears. Then enter download mode by letting go of the buttons and then press the volume up key.
4: Now you should be in download mode, connect your phone to your PC now. Odin should say connected in the message box, if not you need to install your Samsung phone drivers.
5: After connecting your phone and loading the tar file select the Start button and let Odin do it's job. This will take about 5 to to 10 minutes to complete. Please be patient and do not disconnect your phone until the phone reboots and the word Pass appears in the upper left corner of Odin.
6: That's it, you should now be in the phone setup screen with the words Pass in Odin if all went well.
If you get stuck in a bootloop after flashing a tar file don't panic. Enter the maintenance menu by holding the volume down, home and power keys for about 10 seconds. Then clear cache and factory data reset.
Firmware Flashing
1: Using flashfire wipe and then flash the ROM you are switching to that is of a different build. OE2 to OC3 for an example. You wikll most likely get stuck at the Samsung lockscreen when the phone reboots.
2: Don't panic just reboot into download mode and flash the proper firmware with Odin by holding down the home, volume down and power buttons for about 10 seconds. Select reboot and use the same button combo to enter download mode.​
OF1 Files
DO NOT FLASH THE STOCK OF1 Tar If You Want To Keep ROOT, It CAN NOT be Rooted and Flashed Back
Stock OF1 Tar Thanks @scrosler
MD5: cb352665331d3dda27276e811ecb1de2
Of1 Modem Flash with FlashFire Thanks @DeathAngel66669 This too can NOT be flashed back.
OE2 Files
Stock OE2 Tar
MD5: 1adf7275add06468866ed0ef0b74aad9
OE2 Retail Firmware
MD5: cf512cd298ddd364d349e4507174bdae
OC3 Files
Stock OC3 Tar
MD5: 7cff184e30b1e8f40e1f5b03326b1680
OC3 Retail Firmware
MD5: b038a821549430d7e43f18ab3d5cdc12
Tools
Odin 3.10.6
Odin 3.9
Samsung SmartSwitch
MD5 Check
Another just in case....
Is it possible to remove bloatware via this? May be a stupid question but I recall in the past of people having modded restore files such as this which did not contain bloatware or for instance even contained root. Possibilities of this? Also thanks for the thread!
S1L3nTShaDoWz said:
Is it possible to remove bloatware via this? May be a stupid question but I recall in the past of people having modded restore files such as this which did not contain bloatware or for instance even contained root. Possibilities of this? Also thanks for the thread!
Click to expand...
Click to collapse
No, we can not do that without root. If the stock image is modified in any way it breaks the signature and fails to boot. Thank the locked bootloader and Verizon for that but we can disable the apps witch is nearly as good.
Misterxtc said:
No, we can not do that without root. If the stock image is modified in any way it breaks the signature and fails to boot. Thank the locked bootloader and Verizon for that but we can disable the apps witch is nearly as good.
Click to expand...
Click to collapse
Just curious... Would it be possible to grab only the csc folder from this? Interested in making some comparisons versus other variants.
mrapp said:
Just curious... Would it be possible to grab only the csc folder from this? Interested in making some comparisons versus other variants.
Click to expand...
Click to collapse
Yes, you just need to build a ROM with Kitchen and you will have the csc folder after you do that.
mrapp said:
Just curious... Would it be possible to grab only the csc folder from this? Interested in making some comparisons versus other variants.
Click to expand...
Click to collapse
If you haven't grabbed the CSC folder I can get it for you. I have my Linux drive set back up.
Misterxtc said:
If you haven't grabbed the CSC folder I can get it for you. I have my Linux drive set back up.
Click to expand...
Click to collapse
If it's not too much trouble that would be great. I haven't downloaded it yet -- we have data caps up here and I've used quite a bit this month. Hesitant to download a couple gigs just for a few kb!
mrapp said:
If it's not too much trouble that would be great. I haven't downloaded it yet -- we have data caps up here and I've used quite a bit this month. Hesitant to download a couple gigs just for a few kb!
Click to expand...
Click to collapse
No problem at all... here you go.
View attachment 3293605
Misterxtc said:
Here is a link to the stock Verizon tar file to flash in download mode via Odin. I will add more files as they become available. Use this to return to factory stock if a factory reset dose not solve any problems you may have with your retail Verizon S6. If you find these files useful and download them please hit the thanks button. Do not copy these files and repost them, make a link to this thread instead. If I missed anything in the instructions please let me know and I will update the OP. Thanks and enjoy.​
Install Instructions​1: Download Odin and Verizon S6 Retail Tar from the links below. Then extract the Odin.zip file ..
2: Run Odin and pick the AP button then navigate to where you saved the file you want to flash and chose that file. Let Odin verify the file.
3: Turn off your phone and enter download mode by holding the home, volume down and the power buttons until the enter download mode screen appears. Then enter download mode by letting go of the buttons and then press the volume up key.
4: Now you should be in download mode, connect your phone to your PC now. Odin should say connected in the message box, if not you need to install your Samsung phone drivers.
5: After connecting your phone and loading the tar file press the AP button and let Odin do it's job. This will take about 5 to to 10 minutes to complete. Please be patient and do not disconnect your phone until the phone reboots and the word Pass appears in the upper left corner of Odin.
6: That's it, you should now be in the phone setup screen with the words Pass in Odin if all went well.
If you get stuck in a bootloop after flashing a tar file don't panic. Enter the maintenance menu by holding the volume down, home and power keys for about 10 seconds. Then clear cache and factory data reset.​
Click to expand...
Click to collapse
what devices you running now @Misterxtc ?? I have the g925v now. Maybe we will work together again (i mean you can help me all the time haha.) Glad to see youre still around!
Sent from my SM-T807V using XDA Free mobile app
elliwigy said:
what devices you running now @Misterxtc ?? I have the g925v now. Maybe we will work together again (i mean you can help me all the time haha.) Glad to see youre still around!
Sent from my SM-T807V using XDA Free mobile app
Click to expand...
Click to collapse
Good to see you around too. I got the g920v. I ditched my DevEd Note 4 for the rootless S6 because I like it that much. The hardware is pretty amazing. Plus I wanted to step away from ROM building for a while with all that has been going on with life. It's way too time consuming. I will probably get back into it some day but for now these tar threads are a good way for me to give back to the community.
Misterxtc said:
Good to see you around too. I got the g920v. I ditched my DevEd Note 4 for the rootless S6 because I like it that much. The hardware is pretty amazing. Plus I wanted to step away from ROM building for a while with all that has been going on with life. It's way too time consuming. I will probably get back into it some day but for now these tar threads are a good way for me to give back to the community.
Click to expand...
Click to collapse
Nice.. it looks like ground is being made already to root the s6 wwith the newest exploit out lol. hopefully it wont be long! The break has been nice however so i agree.
hard to believe my s5 rom thread now has 150k views! I hope the gs6 edge isnt as demanding as that thread was.. then again i want to remove all this crap and im sure anything will only make the device better!
Sent from my SM-T807V using XDA Free mobile app
Misterxtc said:
Here is a link to the stock Verizon tar file to flash in download mode via Odin. I will add more files as they become available. Use this to return to factory stock if a factory reset dose not solve any problems you may have with your retail Verizon S6. If you find these files useful and download them please hit the thanks button. Do not copy these files and repost them, make a link to this thread instead. If I missed anything in the instructions please let me know and I will update the OP. Thanks and enjoy.​
Install Instructions​1: Download Odin and Verizon S6 Retail Tar from the links below. Then extract the Odin.zip file ..
2: Run Odin and pick the AP button then navigate to where you saved the file you want to flash and chose that file. Let Odin verify the file.
3: Turn off your phone and enter download mode by holding the home, volume down and the power buttons until the enter download mode screen appears. Then enter download mode by letting go of the buttons and then press the volume up key.
4: Now you should be in download mode, connect your phone to your PC now. Odin should say connected in the message box, if not you need to install your Samsung phone drivers.
5: After connecting your phone and loading the tar file press the AP button and let Odin do it's job. This will take about 5 to to 10 minutes to complete. Please be patient and do not disconnect your phone until the phone reboots and the word Pass appears in the upper left corner of Odin.
6: That's it, you should now be in the phone setup screen with the words Pass in Odin if all went well.
If you get stuck in a bootloop after flashing a tar file don't panic. Enter the maintenance menu by holding the volume down, home and power keys for about 10 seconds. Then clear cache and factory data reset.​
Click to expand...
Click to collapse
I know this may be a stupid suggestion, but you might want to add press "start" in your instructions instead of saying "press the AP button" on step 5.
droidiac13 said:
I know this may be a stupid suggestion, but you might want to add press "start" in your instructions instead of saying "press the AP button" on step 5.
Click to expand...
Click to collapse
Good catch, I fixed the OP. After 83,882 views in my S5 tar thread that have the same directions no one noticed
Misterxtc said:
Good catch, I fixed the OP. After 83,882 views in my S5 tar thread that have the same directions no one noticed
Click to expand...
Click to collapse
That's too funny. Thank you for this though. It will definitely come in handy.
Am I blind this am.. But all I am seeing is the Mobile version of Smart Switch, not a PC version as you state...
Gunthermic said:
Am I blind this am.. But all I am seeing is the Mobile version of Smart Switch, not a PC version as you state...
Click to expand...
Click to collapse
No it's pretty hidden. Go three sections down and it's in step 2.
View attachment 3304343
Gunthermic said:
Am I blind this am.. But all I am seeing is the Mobile version of Smart Switch, not a PC version as you state...
Click to expand...
Click to collapse
I updated the OP with a direct link to SmartSwitch from my AFH account.
Is there any way to do this on a macbook?

Categories

Resources