Database Info

[Q] Unable to get phone to boot after Odin flash

Hope someone has some info.
I have recently tried to recover my phone via Odin flash. I'm flashing the GummyCharged 1.9 FE odin file. I've done this SEVERAL times w/ out any problems.
My problem now is that when the Odin flash is complete it shows "Pass" and when I reboot my phone it boots with an old version of CWM (4.0.0.1). Not only that but when I try to "reboot phone" it boot loops back to CWM and will not load ANY for of an OS. I've tried multiple Odin files with no luck. Same thing over and over.
Anyone have any suggestions? I'm used to having to recover my phone from a bricked state... but never had an issue where I push a file to the phone and it will not boot after. Tried wiping data/cache after Odin as well... Still nothing.

I would try going back to stock using Imnuts' stock ROM and PIT file which can be found here: http://forum.xda-developers.com/showthread.php?t=1111486
That has always fixed any and all issues I've been having with the phone after messing something up.
EDIT: Here is the stock EE4 ROM http://forum.xda-developers.com/showthread.php?t=1172182

hazard209 said:
I would try going back to stock using Imnuts' stock ROM and PIT file which can be found here: http://forum.xda-developers.com/showthread.php?t=1111486
That has always fixed any and all issues I've been having with the phone after messing something up.
EDIT: Here is the stock EE4 ROM http://forum.xda-developers.com/showthread.php?t=1172182
Click to expand...
Click to collapse
Hey man, I cant thank you ENOUGH!!!! After A LOT of trial and error (had to download the ee4 file from another link) I was able to get this beast to boot back up. I REALLY appreciate your quick response and help!

KaneD20 said:
Hey man, I cant thank you ENOUGH!!!! After A LOT of trial and error (had to download the ee4 file from another link) I was able to get this beast to boot back up. I REALLY appreciate your quick response and help!
Click to expand...
Click to collapse
No problem. Glad you got her back up and running. No one likes a $500 paperweight.

Props to hazard he's always helping people... just want to let you know
Your a good dude...
SENT FROM THE DOG POUND

hazard209 said:
No problem. Glad you got her back up and running. No one likes a $500 paperweight.
Click to expand...
Click to collapse
Yeah, no doubt. And I was able to do a restore on the Imnuts PBJ OBT kernel from 7/30... my problem started when I installed the new kernel version (from 8/8) and tried to backup/restore. Working perfectly now though!

Having same issue still getting recovery mode
I did a fix sd cardupdate for the rom clocking.
I had gumicharge rom on it
After 4 hours my battery was at 50% so I decided hey i can just load the rom on it again and no problem clean free.
It did not work. I am using odin.
It did not work so I got the pit file from this and it gave my system life and the ed1 file wont download it stalls out and failes i tried using
CI510_VZW_EE4_ALL_ONE-LTE-CP_REV03_user_CL1014954.tar.md5
or
CI510_VZW_EP1F_ALL_ONE-LTE-CP_REV3_user_CL300919_Rooted_Debloated.tar.md5
both do nothing.
My phone just sits there reboots into Manual mode and looks like my blue recovery console.
Clear cache
Upload from SD Card
and clear memory so forth.
Thats all my options.
I am now stuck with phone i cant use or update. I am at work so now i cant use the megaupload since those are blocked by our firewall.
I was able to remote to pc to get a pit file.
At this point i dont know what to do or just do insurance claim on my phone and get another one. I dont know how to fix it now.
I cant read the sd card on any computer to put stuff on it and odin is writing things to it The pit file on this fix did give me a recovery enviroment but nothing on roms are on the sd card.
roms ive tried dont load for automaticaly its just in that manual mode thing with the icon of the little android dude.
it says
Android system recover (3e)
Enter: OK key, select:Vol Up/Vol Down
Reboot system now
apply update from sdcard
wipe data/factory reset
wipe cache partition
bewlo it syas #manual mode* and little android guy with eclamation point next to him.
I have tried severla tiems 3 different roms

2Much2Ask4 said:
I did a fix sd cardupdate for the rom clocking.
I had gumicharge rom on it
After 4 hours my battery was at 50% so I decided hey i can just load the rom on it again and no problem clean free.
It did not work. I am using odin.
It did not work so I got the pit file from this and it gave my system life and the ed1 file wont download it stalls out and failes i tried using
CI510_VZW_EE4_ALL_ONE-LTE-CP_REV03_user_CL1014954.tar.md5
or
CI510_VZW_EP1F_ALL_ONE-LTE-CP_REV3_user_CL300919_Rooted_Debloated.tar.md5
both do nothing.
My phone just sits there reboots into Manual mode and looks like my blue recovery console.
Clear cache
Upload from SD Card
and clear memory so forth.
Thats all my options.
I am now stuck with phone i cant use or update. I am at work so now i cant use the megaupload since those are blocked by our firewall.
I was able to remote to pc to get a pit file.
At this point i dont know what to do or just do insurance claim on my phone and get another one. I dont know how to fix it now.
I cant read the sd card on any computer to put stuff on it and odin is writing things to it The pit file on this fix did give me a recovery enviroment but nothing on roms are on the sd card.
roms ive tried dont load for automaticaly its just in that manual mode thing with the icon of the little android dude.
it says
Android system recover (3e)
Enter: OK key, select:Vol Up/Vol Down
Reboot system now
apply update from sdcard
wipe data/factory reset
wipe cache partition
bewlo it syas #manual mode* and little android guy with eclamation point next to him.
I have tried severla tiems 3 different roms
Click to expand...
Click to collapse
Not sure if you're going into download mode properly but try this:
open ODIN
add the PIT file in the PIT section
add the EE4 OEM file in the PDA section (do not use the phone section)
leave everything else in ODIN as default except click on "re-partition"
take your battery out of the phone
hold the volume down button & plug in your USB cable (do not let go of the volume down button until you are in download mode)
ODIN should now now show a yellow com port for your phone on top left of ODIN and your phone should display "download mode"
select start
When it's complete ODIN will show in green that it passed. Unplug your phone, put the battery back in & boot
Hope this helps & good luck

vudiff said:
Not sure if you're going into download mode properly but try this:
open ODIN
add the PIT file in the PIT section
add the EE4 OEM file in the PDA section (do not use the phone section)
leave everything else in ODIN as default except click on "re-partition"
take your battery out of the phone
hold the volume down button & plug in your USB cable (do not let go of the volume down button until you are in download mode)
ODIN should now now show a yellow com port for your phone on top left of ODIN and your phone should display "download mode"
select start
When it's complete ODIN will show in green that it passed. Unplug your phone, put the battery back in & boot
Hope this helps & good luck
Click to expand...
Click to collapse
I would do this but before starting the flash in odin put the battery back in and uncheck the auto reboot box, when its done unplug from pc and remove battery, put it back in then boot up phone
blazing through on my VZ Droid Charge 4G

anoninja118 said:
I would do this but before starting the flash in odin put the battery back in and uncheck the auto reboot box, when its done unplug from pc and remove battery, put it back in then boot up phone
blazing through on my VZ Droid Charge 4G
Click to expand...
Click to collapse
don't put the battery in during flash & leave auto reboot checked. Auto reboot will not do anything as there isn't a battery installed... it'll just turn off. Unplug the phone after you flash it & put battery back in & boot

vudiff said:
Not sure if you're going into download mode properly but try this:
open ODIN
add the PIT file in the PIT section
add the EE4 OEM file in the PDA section (do not use the phone section)
leave everything else in ODIN as default except click on "re-partition"
take your battery out of the phone
hold the volume down button & plug in your USB cable (do not let go of the volume down button until you are in download mode)
ODIN should now now show a yellow com port for your phone on top left of ODIN and your phone should display "download mode"
select start
When it's complete ODIN will show in green that it passed. Unplug your phone, put the battery back in & boot
Hope this helps & good luck
Click to expand...
Click to collapse
This is pretty much what fixed it for me. DON'T GIVE UP! Trust me, I literally had to try this several times before it booted up. I know its frustrating, trust me, but if you stick with it you can fix the phone.
Each time you're able to get to recovery mode, if you're phone doesn't boot, do like five data wipes and wipe cache. Then Odin the .pit and the EE4 from the link above in the pda field (both at the same time).
Good luck! Stick with it I know you CAN fix this!
Sent from my SCH-I510 using XDA Premium App

KaneD20 said:
This is pretty much what fixed it for me. DON'T GIVE UP! Trust me, I literally had to try this several times before it booted up. I know its frustrating, trust me, but if you stick with it you can fix the phone.
Each time you're able to get to recovery mode, if you're phone doesn't boot, do like five data wipes and wipe cache. Then Odin the .pit and the EE4 from the link above in the pda field (both at the same time).
Good luck! Stick with it I know you CAN fix this!
Sent from my SCH-I510 using XDA Premium App
Click to expand...
Click to collapse
No need to wipe anything... when you have "re-partition" checked it wipes everything but the sd card

vudiff said:
No need to wipe anything... when you have "re-partition" checked it wipes everything but the sd card
Click to expand...
Click to collapse
I'm sure you're right, these are just the things that I did when I finally got it working.

I got stuck myself last night and odin started to fail every attempt, even with the pit file and following numerous instructions found around the site. I actually thought my phone was bricked for good.
I installed PST lite and selected the PIT and EE4 and selected to repartition. It took longer to do but everything came back up. Then using odin I was able to flash back to the rom I had before.
This was after an hour of trying to fix it as I mentioned and Odin kept failing.

^attempting to reflash via samsung pst lite.
loaded PIT, stock EE4. checked "repartition". when I click download, it starts, but freezes at 9%. RX_TIMEOUT shows on the phone screen.
I'm trying this method b/c Odin is not working. Same thing, just hangs, sez RX_TIMEOUT. (repartition w/ PIT, stock EE4)

sushi_stalker said:
^attempting to reflash via samsung pst lite.
loaded PIT, stock EE4. checked "repartition". when I click download, it starts, but freezes at 9%. RX_TIMEOUT shows on the phone screen.
I'm trying this method b/c Odin is not working. Same thing, just hangs, sez RX_TIMEOUT. (repartition w/ PIT, stock EE4)
Click to expand...
Click to collapse
Have you tried putting the battery back in during the flash?
Sent from my Droid Charge running GummyFroyo 1.9.1

kvswim said:
Have you tried putting the battery back in during the flash?
Sent from my Droid Charge running GummyFroyo 1.9.1
Click to expand...
Click to collapse
Yes. tried both with and without. Just hangs. Can never fully make it through the flash.
Stuck with soft bricked phone.
Waiting for my wife to get home with her PC laptop. Hoping it really is just a platform issue (running ODIN on Mac Boot Camp)

sushi_stalker said:
Yes. tried both with and without. Just hangs. Can never fully make it through the flash.
Stuck with soft bricked phone.
Waiting for my wife to get home with her PC laptop. Hoping it really is just a platform issue (running ODIN on Mac Boot Camp)
Click to expand...
Click to collapse
What version of Odin are you using? I'm pretty sure I'm using Odin v. 1.82 or something close to that. Not too sure that it would make the difference. Just a thought.
Also, I had to Odin QUITE a few times to get it back up. I had even run the Odin w/ JUST the .pit file. Thought I read somewhere to run the .pit an UNCHECK the repartition box (I know it says it'll give you an error but I did not get one).
All in all, not too sure what exactly it was that finally got it working. But I eventually ran the .pit and ee4 (both posted in post #2 of this thread). Then when my phone booted up, it looked like the problem remained. I had to get back to work from lunch so I just put the phone in my pocket. Then out of nowhere I heard the boot animation come on.
Just make sure you read through, pretty much, all of the threads that deal w/ this stuff. There is almost always someone that has come across the same problem that you may have and almost always someone who had figured out how to fix it.
Good luck, this CAN be fixed!

[q] heeeellllp!!!!!

Heeeeelllp! I was trying to get touchwiz 4.0 on my Samsung Galaxy S WIFI 5.0 running android 2.2.2 when it wouldn't let me move the apk to the system/apps folder. So i made a stupid mistake and moved the apps folder out of the system folder and into its parent folder what ever that folder is. While it was moving it started coming up with force close messages tell me that so and so had forced closed and it was just constantly repeating the force close vibration pattern. Then while it was still moving the screen went black (but still on) yet the force close vibration kept going. So i rebooted and the pattern was still going even when the boot animation was there and when the boot animations has finished i just displays a black screen but yet again there is still the force close vibration happening. It boots into recovery ok and i am rooted. No CMW or custom rom though. I was using a root browser, dont no wich one. Can you help me get my data back or even my galaxy working with my data. thanks

Now that's a realy nice title you picked there for your opened thread.
I ques a lot of people will understand your problem with that title.
Edit; maybe I'm being a bit of an ass like this sorry but I realy don't understand why people opening threads with a title like you use.
If everyone would start a thread with the title heeeelppppp imagine how far we would come.
Anyway, you write you are still able to come in recovery mode and that you placed the apps out of the system folder into another folder whatever that would be..
Can't you reverse it by digging into your folders, find the apps folder and place it back in sys?
I think that's the most easiest and only step to get your data back.

But how do you do that through the recovery? I'm only using samsung's standard.

Is it possible to connect your device to pc and brows on it using explorer on pc?
If that's possible you could cut an past the map back to the system folder?
Karim.younus said:
But how do you do that through the recovery? I'm only using samsung's standard.
Click to expand...
Click to collapse

Kies wont reconize it when i boot my device normally but when i put it in recovery or download mode it says connecting but never connects. my PC reconizes my device in the same modes but wont let me browse the files. Is there any way i can browse the files on pc.

Ok, iv'e now tried a factory reset and its still not working.

I'm going to try and flash an ICS ROM

I'm trying to get posts now so i can ask another question

Sorry but I do not understand what you are trying to explain.
If your pc recognizes the device put it in storage mode if possible.
Karim.younus said:
Kies wont reconize it when i boot my device normally but when i put it in recovery or download mode it says connecting but never connects. my PC reconizes my device in the same modes but wont let me browse the files. Is there any way i can browse the files on pc.
Click to expand...
Click to collapse

If that's the case I'm affraid you lost all data.
What's not working?
Karim.younus said:
Ok, iv'e now tried a factory reset and its still not working.
Click to expand...
Click to collapse

Just flash a stock rom...your phone should work then...
And remember for thr future, before doing changes with root permissions, take a backup of your data...
And don't create a thread like this in the development section...unless you want to trolled/flamed/get infracted...
Typed using a small touchscreen

My PC would only reconize it in recovery or download meaning I couldn't put it in to storage mode. Doesn't mater anyway now I'm trying to flash a new ics rom. Bit I don't know if you can flash any Rom with odin or not and if it needs a new kernel. Do you need USB debugging to install a Rom or kernel? Im new to all this you see.

You see I don't think the factory reset did anything.

OK, I'l flash a new stock rom and see if that works.

A) put phone down. Wait. Put it in a box . Then bury it.
B) read for a week. All about your phone specs, what adb is, what the difference between CWM (clockwork mod recovery) and rom manager is, how to flash partitions with Odin and heimdall, and any other info u can get your hands on.
C) after said time is up. Dig up your phone and fix it up .

Samsung Infuse Soft Brick and Distorted Clockwork Mod Recovery

I am in desperate need of help .. I am not a noob to flashing roms and rooting, however I have a one-off situation w/ no precedents to my knowledge. I have read these and other forums for days to no avail.
I was flashing Infintium Rom 4.0.4 from MIUI 2.3.6. I followed the steps listed in the post (http://forum.xda-developers.com/showthread.php?t=1661690). After flashing I rebooted and waited however the phone was/is stuck on the Samsung logo and never progressed. I then pulled the battery and attempted to go back to recovery mode to reflash make sure I did flashed correctly. However, upon going back into recovery I was greeted by the below image.
Clockwork Mod is extremely distorted and flat out unusable !! As I read further down it advised to use Heimdall (http://forum.xda-developers.com/showthread.php?t=1331381). I downloaded and attempted to use, however my PC (Which by the way is Windows 7 64-Bit) recognized the phone but the Heimdall software did not. I already had the right drivers for the PC and phone. After a few tries I deleted the files and reapplied them. On the 2nd menu after selecting list devices, on the drop down the option for Samsung USB Composite Device neeever ever appears. I also tried on a different PC that ddnt have the drivers and started brand new. Still, Heimdall ddnt recognize.
I also tried to flash numerous files including but not limited to GTG Ultimate Unbrick via Odin. Again, PC recognized USB connection however program ddnt. At this point, I do not know if it is because the status of Clockwork Mod on my phone, but I know it is not because of the drivers or the USB ports on my PC.
In addition to that, I have just scrapped the idea of flashing or getting in CWM and just wanted to do a hard reset (While phone is off held Vol down and Power, once started released power and contimued to hold Vol down. This should take the phone from the Samsung logo to an alt menu that will give the option to do a factory reset. But again w/ my luck .. that screen neeever appears.
In short I have tried at least 3 different ways and many maaany variations to get the phone back into recovery or into a full boot and had NO success.. Please help and ask as many questions as needed to diagnose and resolve this issue .. Thanx in advance and apologize in advance if posted in the wrong thread.

Are you placing your phone in download mode?
Remove battery and place it back.
Hold vol+ & vol- , and plug in the usb to your phone with the other end already connected to the PC.
Now see if Odin or heimdall recognize your device.
Sent from my sweet & buttery Infuse

andros11 said:
Are you placing your phone in download mode?
Remove battery and place it back.
Hold vol+ & vol- , and plug in the usb to your phone with the other end already connected to the PC.
Now see if Odin or heimdall recognize your device.
Sent from my sweet & buttery Infuse
Click to expand...
Click to collapse
I have done so neither Odin or Heimdall are recognizing it or showing the phone is connected.

ohsirus said:
I have done so neither Odin or Heimdall are recognizing it or showing the phone is connected.
Click to expand...
Click to collapse
If neither Odin or Hemdall can 'see' the phone, then possibly you don't have the correct drivers installed...
Try downloading and installing these:
http://d-h.st/sKF
Then open Odin/Hemdall and plug your phone in again while in Download Mode.

Ryo Misaki said:
If neither Odin or Hemdall can 'see' the phone, then possibly you don't have the correct drivers installed...
Try downloading and installing these:
Then open Odin/Hemdall and plug your phone in again while in Download Mode.
Click to expand...
Click to collapse
I will try again .. Downloaded, rebooting then will go thru the process again .. standby

Ryo Misaki said:
If neither Odin or Hemdall can 'see' the phone, then possibly you don't have the correct drivers installed...
Try downloading and installing these:
Then open Odin/Hemdall and plug your phone in again while in Download Mode.
Click to expand...
Click to collapse
no change .. still shows disconnected

The pic u have posted it shows u need to press the up button to get the download mode (continue)
Sent from my Galaxy Nexus using Tapatalk 2

rkkaranrk said:
The pic u have posted it shows u need to press the up button to get the download mode (continue)
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
I just did that to post a pic as an example .. I did go to download mode and not recognizing it

The CWM screen is shot because you don't have gingerbread bootloaders, it will always look like that until to can flash the right ones..
Have you tried different cables, different ports, etc?
Sometimes mine would recognize.. sometimes being plugged in first then running Odin works, sometimes I would have to run Odin and then plug in the phone.. kinda a crapshoot...
Its powered by Jellybeaned AOKP!

drnecropolis said:
The CWM screen is shot because you don't have gingerbread bootloaders, it will always look like that until to can flash the right ones..
Have you tried different cables, different ports, etc?
Sometimes mine would recognize.. sometimes being plugged in first then running Odin works, sometimes I would have to run Odin and then plug in the phone.. kinda a crapshoot...
Its powered by Jellybeaned AOKP!
Click to expand...
Click to collapse
I know I need to get the bootloader and a kernel on it however I cant = ( .. yet .. I have 4 different ports on my PC and have tried them all. i have tried phone on then run programs and programs on 1st then phone on and no new results.
I found this short video and it describes my exact situation .. please watch to futher understand http://www.youtube.com/watch?v=OHLUYckTlug

So u have odin and heimdal both on the same PC and drivers for them if yes then try this.
On the PC/Laptop uninstall all the drivers for samsung or any other phone and follow this.
Go to accessories> system tool> system restore and check the restore point where the drivers for heimdall were installed restore to a previous restore point after restore finishes install the drivers for Infuse and see now Odin recognizes ur phone, It should.

I had the same exact problem, do you have another phone on which you can install the same CWM recovery on? ...Because the clockwork mod recovery still works, it's just that you can't see it. So just flash a new ROM, by going back n forth between phones, clock how many clicks it takes to get to 'choose zip to install' then 'download' on the not messed up phone, then do the same on the screwy one, just keep doing that till u flash the new ROM.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

[Q] Problem during rooting help

I was attempting to get root access to my galaxy tab 2 10.1 running android 10.2.1 (or whatever the latest Samsung update was it is 10.2 on my phone but am sure it was 10.2.1 on the tablet.
I was following this guide that someone here recommended
http://www.ibtimes.co.uk/articles/4...-p5113-android41-jellybean-android404-ics.htm
I set usb debug and made sure the drivers were on my pc and made sure KIES was completely not running
Followed the instructions to the letter but should have worried when I found the instructions to get to download were wrong - I found on videos that it was reboot using power and right volume key. That was successful
It connected to ODIN fine and the yellow box came up
I made sure the two boxes were ticked and then searched for the file
CF-Auto-Root-espresso10wifi-espresso10wifibby-gtp5113.zip and started ODIN
it seemed to be going fine until suddenly a red box came up with update failed
Now all I can get on the device is "firmware upgrade encountered an issue. Please select recovery mode in Kies and try again"
No matter how I try to restart this I get the same screen and imagine I couldn't connect to kies even if I should
Can anyone help as I am worried that I have bricked my device - I was looking for a simple way to get root without flashing a whole rom - or is that what I was doing anyway?

Here is a link that may can help you : http://forum.xda-developers.com/showthread.php?t=1722745
Try to do the point A to install CWM Recovery and root correctly the tab then do the point E to install the stock Android 4.0.4
ps : if you want to do something to your tab, try to search here before other websites, big community, good informations/tips (personnal advise) :good:

Maybe file you downloaded is corrupted , redownload it from xda or sammobile and do steps again

n0is said:
Here is a link that may can help you : http://forum.xda-developers.com/showthread.php?t=1722745
Try to do the point A to install CWM Recovery and root correctly the tab then do the point E to install the stock Android 4.0.4
ps : if you want to do something to your tab, try to search here before other websites, big community, good informations/tips (personnal advise) :good:
Click to expand...
Click to collapse
I will take a look but so far the only thing I get is the message to connect to KIES and it wont of course connect - cant get into any other modes - you would think they would have some kind of hard boot recovery button that gets you to basic screen to download the latest firmware.
And I did start here and believe that this led from a post here - I was trying to find the least complicated method of getting root access without changing what I already had too much - the only other process that I found on here seemed to have lots of people reporting problems if it wasn't a 3g model
It is beginning to look like I may have found out what bricking is - thanks for the reply anyway

would like to do that
mjrshark said:
Maybe file you downloaded is corrupted , redownload it from xda or sammobile and do steps again
Click to expand...
Click to collapse
In fact the instructions do say if it doesn't work first time, to run it again with the boxes unticked - the problem is that I cant get back to download mode, or any mode other than the message to connect to kies, so have no way of doing this. So looks like it may have bricked - is there any way of unbricking a tablet?:crying:
It's going to be an expensive mistake especially as I haven't even had the £50 cash back from Samsung yet and I would have to pay full price now to replace it,

So did you remove it from Odin after it failed?
If you connect and pull up Odin, even though its not in download mode, do you get an active com box showing its connected?
Have you tried kies yet?
There is a simple method of rooting in the link posted in the previous post by n0is. At this point you might have to flash a stock image before you try and root again. If you can get an active com port in Odin, run a stock image first, they can be found here in xda. Get it booted up and then make sure you are on the latest android version, its 4.1.1 here in the US. If you try and root first and then update, you will lose root so update first to avoid rooting twice.
Just to clarify the root procedures,
Odin the cwm recovery .tar from the thread.
Reboot to recovery then flash the super user zip for the p5113. It will ask you about erasing stock recovery or something like that, check yes.
And that's it, simple enough
Sent from my SCH-I535 using xda premium

not optamistic but will try!
samsgun357 said:
So did you remove it from Odin after it failed?
If you connect and pull up Odin, even though its not in download mode, do you get an active com box showing its connected?
Have you tried kies yet?
There is a simple method of rooting in the link posted in the previous post by n0is. At this point you might have to flash a stock image before you try and root again. If you can get an active com port in Odin, run a stock image first, they can be found here in xda. Get it booted up and then make sure you are on the latest android version, its 4.1.1 here in the US. If you try and root first and then update, you will lose root so update first to avoid rooting twice.
Just to clarify the root procedures,
Odin the cwm recovery .tar from the thread.
Reboot to recovery then flash the super user zip for the p5113. It will ask you about erasing stock recovery or something like that, check yes.
And that's it, simple enough
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
I will try but I don't think it is going to work. Whenever I connect the tablet by USB I get the usb connecting sound followed immediately by the USB disconnect sound - this just continues to happen every 4 seconds or so all the time that the device is connected. At the moment I have it on charge as once the error screen comes on it doesnt seem to go off for a very long time and then it wont start unless I charge it first. After a few minutes on charge - The firmware upgrade encountered an issue message comes up. I am going to leave it a while until I am sure it is fully charged and then try what you suggest - not optamistic though since I now realise that it is not even connecting properly. I just have a bad feeling about this. I had to disconnect it from the power yesterday because the error screen stays on continuously and the device starts to get warm
Assuming that I ever manage to get a stock image installed will this mean I can go back to normal kies updates - all I really wanted was the standard samsung android O/S but with super user added.
Unfortunately I had read the linked article a while back and what made me more confident was the statement that said it was "virtually impossible to brick this device"

Since it's still going into Charging mode and spitting out error messages, it's not completely bricked. It's just in a reboot loop (a.k.a. soft brick).
Keep trying to get it into Download mode. Sometimes the timing is a little tricky if it's in a boot loop.
1. Disconnect it before trying to get it into Download Mode. If it's plugged in (charger or PC), the device will go into Charging mode instead.
2. Hold the Power button for 10 seconds to make it reboot.
3. When you see the screen turn off, let go of Power and then press and hold Power and Volume Right/Up.
4. If done correctly, it will immediately go into Download Mode. If you see the Samsung logo instead, repeat from Step 2.

some progress but still stuck - any more ideas please
samsgun357 said:
So did you remove it from Odin after it failed?
If you connect and pull up Odin, even though its not in download mode, do you get an active com box showing its connected?
Have you tried kies yet?
There is a simple method of rooting in the link posted in the previous post by n0is. At this point you might have to flash a stock image before you try and root again. If you can get an active com port in Odin, run a stock image first, they can be found here in xda. Get it booted up and then make sure you are on the latest android version, its 4.1.1 here in the US. If you try and root first and then update, you will lose root so update first to avoid rooting twice.
Just to clarify the root procedures,
Odin the cwm recovery .tar from the thread.
Reboot to recovery then flash the super user zip for the p5113. It will ask you about erasing stock recovery or something like that, check yes.
And that's it, simple enough
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
Hi well thanks -
when I connected Odin it did show up yellow and so I downloaded the P5110 stock from from the other thread - all went well and it reported all OK and re-booted - saw the animated sequence but now it has stalled on the samsung logo and still wont connect to kies
So still stuck but at least it has moved on - The instructions on the other page were a little unclear about one stage
It said if there was pit file included to set something and tick repartition - this was all in one line and so I assumed part of the pit instruction - as there was no pit file I did not tick re-partition - I wonder if I should have done?
I have just reconnected to ODIN and the ID Com is still lit up yellow so presumably I could try running it again, or should I look on here for another stock rom - I am wondering if I have somehpw scewed up the bootloader and if so how I go about restoring it
ODIN is the only thing it connects to right now

[GUIDE Win/Linux/Mac] Debrick 4.3 with Odin or Verizon Utility + PIT [SOFT BRICK]

THIS WILL WORK ONLY IF YOU CAN GET INTO DOWNLOAD MODE (Odin mode) if you bricked your bootloader try HERE
Who can benefit from this?
Anyone who took the OTA to 4.3 then tried to downgrade resulting in a soft brick
Anyone who took the OTA to 4.3 and somehow lost there recovery or follow restoring stock recovery instructions HERE
Anyone who took the OTA to 4.3 but failed with access to download mode
Anyone who wants 4.3 but for some reason can not OTA
Anyone who took the NC1 update (new 4.3) and wants to revert to ML1 (old 4.3 with saferoot and safestrap support)
Linux and Mac users must follow the Odin method using the correct PIT file (found at the bottom of the op) and substitue Odin with Jodin3 found HERE and spam AdamOutler thanks button for making Jodin3
WARNING! UPDATING TO 4.3 WILL RESULT IN A LOCKED BOOTLOADER FOREVER!!
4.3 with Odin
How to enter Download Mode
Make sure your device is completely off
Hold Volume Down + Home
While holding both of them simultaneously press the Power button until you see the disclaimer on the screen
Then let go of all the buttons and press Volume Up
=====================================================================================
Download and extract Odin <--- New link 1/23/14
Download and extract ALL_I535VRUCML1_I535VZWCML1_2198062_REV09_user_low_ship.tar.md5.7z (official old 4.3 tar ball) or ALL_I535VRUCNC1_I535VZWCNC1_2198062_REV09_user_low_ship.tar.md5.7z (official new 4.3 tar ball)
Download kies and install as administrator. make sure the [Unified Driver Installer] check box is checked at the end of the install (Might take some time)
Windows Kies Here
Mac Kies Here
Enter Download Mode
Make sure Kies is closed then plug in your phone and wait for drivers to install
Open Odin As administrator
You should see your phone under ID:COM (you should also see it has been added in message)
Make sure only Auto Reboot and F. Reset Time is checked
Check PDA [ ]
Click on [PDA] And select the .tar file you just extracted (Only use PDA Never use the others)
Wait for it to verify the MD5 then click [Start]
From here on out its all automated Odin will Flash SCH-I535_I535VRUCML1 then restart (dont forget first boot takes time)
If you get stuck in a boot loop go into recovery and do a factory reset (probably should regardless)
4.3 With Verizon Utility [will always push the most recent firmware atm 4.4.2 and you will not be able to go back to 4.3] (Windows only for now)
How to enter Download Mode
Make sure your device is completely off
Hold Volume Down + Home
While holding both of them simultaneously press the Power button until you see the disclaimer on the screen
Then let go of all the buttons and press Volume Up
=====================================================================================
Download and unzip
Windows SUA_ar.zip <--- New Link
Mac SUA_ar.zip
Open SUA_ar folder
Install SUABnRSetup as administrator (might take some time and may not be nessesary)
Download kies and install as administrator. make sure the [Unified Driver Installer] check box is checked at the end of the install (Might take some time)
Windows Kies Here
Mac Kies Here
Make sure Kies is closed then go into download mode and plug into your pc (hold here until drivers install)
Run SUA.exe as administrator
Click on [Repair Assistant] (on the left)
Click on run [Repair Assistant] (on the bottom)
After repair assistant recognizes your phone click [Repair Galaxy S(R) III] (on the right side)
It will say "Due to the condition of your phone/tablet, all data will need to be erased during the repair."
Click [continue]
From here on out its all automated it will download and install SCH-I535_I535VRUCML1 then restart (dont forget first boot takes time)
If you get stuck at 84% try THIS
If you get stuck in a boot loop go into recovery and do a factory reset (probably should regardless)
If you keep failing it might be because you have bad partitions. Download the pit file that matches your phone (16gb S3 use the 16gb pit file or 32gb S3 use the 32gb pit file) Follow the Odin instructions with the addition of your pit file By clicking [PIT] in Odin. Or try this fix Here
SCH-I535_D2VZW_16gb.pit
====================
SCH-I535_D2VZW_32gb.pit
As long as things went smooth you should be back on 4.3 ready to take on the world!
Want root on 4.3? Use saferoot (ML1) HERE or towelroot (ML1/NC1) HERE Remember you are on a locked bootloader. You can not flash insecure bootloader, roms or custom recovery.

awesome. I had given up and was just waiting for the 4.3 tar
I'm really hoping this works since you had the exact same symptoms as me
Thanks in advance!

kangeon said:
awesome. I had given up and was just waiting for the 4.3 tar
I'm really hoping this works since you had the exact same symptoms as me
Thanks in advance!
Click to expand...
Click to collapse
I was waiting as well, But I was about to chuck my Droid x against a wall. Another funny thing is right before I tried this my phone got sudden death syndrome (power button stayed compressed so every time battery is put in it automatically tuns on then off ). Luckily slamming my phone against the table wasn't a internet troll and it got fixed.

ThePagel said:
I was waiting as well, But I was about to chuck my Droid x against a wall. Another funny thing is right before I tried this my phone got sudden death syndrome (power button stayed compressed so every time battery is put in it automatically tuns on then off ). Luckily slamming my phone against the table wasn't a internet troll and it got fixed.
Click to expand...
Click to collapse
Bro I hate my Droid X. I sent my phone out today to have it JTAG to 4.3 and hours later this came out LOL. Good job bro!!!!:good:

I got it working
Thanks so much!

You are a life saver. Thank you!

Good to see that some folks can resurrect their device now. A locked but working phone is certainly better than no phone at all.
Awesome work ThePagel!
Sent from my SCH-I535 using Tapatalk

I signed up just to say thank you. I decided to go for broke and take my phone into Verizon just to see what they said and they suggested I upgrade to a new phone. I'm sure they could have performed this for me, but I'm glad I did it myself. Once again, thank you.

Couple things, when you redo the OP could you make sure to detail what scenario would lead you to using this tool? Maybe make that a little clearer.
Also, we don't have a bootloader to boot directly into like say HTC devices. Samsung let's you boot into recovery or download mode. Download Mode may be an equivalent term to "bootloader" for other devices but it may be confusing to new S3 users down the road. Cheers!
Sent from my SCH-I535 using Tapatalk 4

@ThePagel I PMd you. I will go ahead and post a mirror for the SUA_ar.zip here. You can move this link to the OP. Once everyone wakes up they are gonna shut down your dropbox for excessive traffic.
http://www.androidfilehost.com/?fid=23269279319199403

Would this work on a phone that wasn't bricked but you wanted to just restore it to pristine stock 4.3? (a sort of "oh crap, I accidentally deleted a bunch of system APKs - how do I get those back?!" moment)

s'pht said:
Would this work on a phone that wasn't bricked but you wanted to just restore it to pristine stock 4.3? (a sort of "oh crap, I accidentally deleted a bunch of system APKs - how do I get those back?!" moment)
Click to expand...
Click to collapse
Kies should handle that. Not sure but as never used Kies but you should not need that other file. Just repair in Kies.

Will this repair a broken recovery also? After I took the OTA I rooted then tried to install a custom recovery. Now when I boot to recovery I get the error "SECURE FAIL: KERNAL" as well as the yellow triangle. The phone does work and I can get into download mode, I just want my recovery back so I can do a factor data reset if needed.

harrst1 said:
Will this repair a broken recovery also? After I took the OTA I rooted then tried to install a custom recovery. Now when I boot to recovery I get the error "SECURE FAIL: KERNAL" as well as the yellow triangle. The phone does work and I can get into download mode, I just want my recovery back so I can do a factor data reset if needed.
Click to expand...
Click to collapse
It seems this method will restore the phone to the factory state thus should repair your recovery also.

SlimSnoopOS said:
Couple things, when you redo the OP could you make sure to detail what scenario would lead you to using this tool? Maybe make that a little clearer.
Also, we don't have a bootloader to boot directly into like say HTC devices. Samsung let's you boot into recovery or download mode. Download Mode may be an equivalent term to "bootloader" for other devices but it may be confusing to new S3 users down the road. Cheers!
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
I think I can manage that
prdog1 said:
@ThePagel I PMd you. I will go ahead and post a mirror for the SUA_ar.zip here. You can move this link to the OP. Once everyone wakes up they are gonna shut down your dropbox for excessive traffic.
http://www.androidfilehost.com/?fid=23269279319199403
Click to expand...
Click to collapse
Thankyou!
s'pht said:
Would this work on a phone that wasn't bricked but you wanted to just restore it to pristine stock 4.3? (a sort of "oh crap, I accidentally deleted a bunch of system APKs - how do I get those back?!"
Click to expand...
Click to collapse
Yes
prdog1 said:
Kies should handle that. Not sure but as never used Kies but you should not need that other file. Just repair in Kies.
Click to expand...
Click to collapse
Because he is on 4.3 kies is no help. Its still giving us 4.1.2
harrst1 said:
Will this repair a broken recovery also? After I took the OTA I rooted then tried to install a custom recovery. Now when I boot to recovery I get the error "SECURE FAIL: KERNAL" as well as the yellow triangle. The phone does work and I can get into download mode, I just want my recovery back so I can do a factor data reset if needed.
Click to expand...
Click to collapse
Yes this will work just remember you run the risk of a hard brick if things go wrong

ThePagel said:
I think I can manage that
Thankyou!
Yes
Because he is on 4.3 kies is no help. Its still giving us 4.1.2
Yes this will work just remember you run the risk of a hard brick if things go wrong
Click to expand...
Click to collapse
Ok. I see now. You are just using the drivers from Kies.

Interesting...even after going through this procedure I still get the Samsung "Custom Lock" screen.
Thanks for this btw!!

eudoxia said:
Interesting...even after going through this procedure I still get the Samsung "Custom Lock" screen.
Thanks for this btw!!
Click to expand...
Click to collapse
A lot of original S3s came with that lock. Don't know if we ever figured out why.

eudoxia said:
Interesting...even after going through this procedure I still get the Samsung "Custom Lock" screen.
Thanks for this btw!!
Click to expand...
Click to collapse
prdog1 said:
A lot of original S3s came with that lock. Don't know if we ever figured out why.
Click to expand...
Click to collapse
That is weird. Mine did not ship with custom but after the brick it did have it, then after the unbrick it was gone. Is your warranty in download mode 0 or 1?

prdog1 said:
A lot of original S3s came with that lock. Don't know if we ever figured out why.
Click to expand...
Click to collapse
I stand corrected, after pulling the battery for a minute and rebooting the "Custom Lock" screen is gone..
Thanks ...You Rule :good: